The Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA
|
|
- Loraine Foster
- 5 years ago
- Views:
Transcription
1 TRS 9 35MM 78MM 150MM 78MM THICKNESS END SPAN INTERNAL SPAN MINIMUM PITCH 0.55MM 2.30M 3.20M 3 DESCRIPTION TRS 9 profile is designed for commercial and industrial roofing. The profile is suitable for low pitch roofing as well as curved roofing. Commercial and industrial roofing G550 grade steel with minimum 0.55 BMT gives more resilience to damage. SPECIFICATION AT A GLANCE GENERAL Minimum Roof Pitch 3 Degree Effective Cover 910mm Max. Unsupported Overhang Contact "" SPANS End Span 0.55 BMT 2300mm Internal Span 0.55 BMT 3 DRAPE CURVE 0.55mm BMT G300 Min. 90m Radius WALL CLADDING FIINGS Cladding fixing on 20mm, 12 Gauge class 4 screws with neo washers, miss 2 pans, miss 3pans, every H 3.1 treated batterns second on ends ROOF FIINGS Low / Medium wind Zone Timber: class 4 14 x 75mm with neo washer and embossed washer Steeltite: 12 x 65mm with neo washer and embossed washer High wind Zone Timber: class 4 14 x 75mm with neo washer and embossed washer, approved profile's metal washer and EPDM washer Steeltite: 12 x 65mm with neo washer and embossed washer, approved profile's metal washer and EPDM washer Very High Wind Zone Contact "" Specific Design Wind Zone Contact "" ROOF FIING LENGTHS Dark Colour Up To 8 Meters Solid fix Light Colour Up To 12 Meters Solid fix sheet lengths Excess Above* Oversize holes required for movement *Contact for further information on specific design FIINGS, FASTENING AND UNDERLAY All fixings and fasteners are to be of an approved type, compatible with all materials, the environment and meeting the requirements of the NZ Building Code. Installation is to be in accordance with the NZ Metal Roof and Wall Cladding Code of Practice or manufacturer's instructions. Fix every crest to: Ridge, Hip, Valley, Gutter and Periphery area. Underlay as per the project specification is to be used. COATINGS AND COMPLIANCE WITH AS/NZS 2728 (CORROSION RESISTANCE) The KiwiColour brand is available in two different product lines designed specifically to suit different environmental and atmospheric conditions; KiwiColour VITOR & KiwiColour ZENE. Independent laboratory tests have confirmed that KiwiColour VITOR complies with the corrosion resistance performance requirements of AS/NZA 2728 with regards to Product Type 4 (the corrosivity category into which most populated areas of New Zealand fall) in all aspects of salt spray performance and humidity resistance and including other product properties such as coating thickness, gloss and cross hatch adhesion(gloss category 2 ). Independent testing demonstrated that Kiwicolour ZENE samples met the corrosion resistance performance requirements of AS/NZS 2728:2007 for Product Types 3 and 4. Refer to Product literature for selection of suitable finishing and warranty. All kiwi colour materials are available on Master spec. 38MM C-TRS9-00 PRODUCT TECHNICAL DATA NTS
2 ROLL TOP RIDGE FLASHING RIDGE FLASHING PURPOSE MADE TO MATCH ROOF PITCH STOPEND SHEET PROFILED FOAM CLOSURE (only required in high risk situations of wind blown moisture entering) ROOF PITCH 3 MIN. SCREW FIING WITH 12x55 STEEL TEK & NEO WITH SELECTED WASHER SYSTEM BMT 0.55 RIDGE FLASHING NOTCHED TURN-DOWN OVER ROOFING, 5mm MA GAP TO CLEAR OF TROUGH OR ROOFING ROOFING UNDERLAY LAID OVER SAFETY NETTING STEEL PURLIN & CLEAT STRUCTURAL STEEL ROOF PITCH 10 VERY HIGH OR ETRA WIND ZONE. ROOF PITCH < mm C-TRS9-01 TOP RIDGE DETAIL - SQUARE TOP
3 1255 STEELTEK & NEO WITH SELECTED WASHER SYSTEM ROOF PITCH 3 MIN. ROOF UNDERLAY SAFETY MESH STEEL PURLIN & CLEAT C-TRS9-02 TYPICAL ROOF LAYOUT
4 35 MIN. LAP 1255 STEELTEK & NEO WITH SELECTED WASHER SYSTEM, FASTEN EAVES AT EVERY CREST 50mm MIN. OVERHANG 125mm MIN. COVER ROOF PITCH 3 MIN. DRIP EDGE ROOFING UNDERLAY LAID OVER SAFETY NETTING EAVE FLASHING HEM TO TOP EDGE WALL CLADDING WALL UNDERLAY C-TRS9-03 GUTTER FLASHING DETAIL - ETERNAL
5 5 Y 10 SCREW FIING WITH 12x25 TYPE 17 TEK & NEO OR 4.8mm ALUM RIVETS MIDSPAN WHERE APPLICABLE 5mm MA GAP TO CLEAR OF TROUGH OR ROOFING BMT0.55 BARGE FLASHING STOP END SHEET PROFILED FOAM CLOSURE (Foam closure strip only required in high risk situations) NOTCHED FLASHING FOLDED & FIED THROUGH RIBS WITH 12g 55mm STEEL TEK SCREW Z ROOFING UNDERLAY LAID OVER SAFETY NETTING 12x55mm STEEL TEK & NEO WITH SELECTED WASHER SYSTEM WALL CLADDING STEEL PURLIN WALL UNDERLAY (if required) Y Z ROOF PITCH 10 50mm STEEL GIRT VERY HIGH WIND ZONE. ROOF PITCH < 10 70mm ETRA HIGH WIND ZONE. 90mm C-TRS9-04 BARGE DETAIL
6 SCREW FIING WITH 12x55 STEEL TEK & NEO WITH SELECTED WASHER SYSTEM TURN-DOWN TO SUIT ROOFING PROFILE, 5mm GAP MA TO CLEAR OF ROOFING ROOF PITCH 3 MIN. MIN. COVER PROFILED FOAM CLOSURE (Foam closure strip only required in high risk situations of wind blown moisture entering) STOPEND SHEET BMT0.55 BARGE FLASHING Z 1240 TYPE 17 TIMBER TEK PROFILED FOAM CLOSURE (Foam closure strip only required in high risk situations) ROOFING UNDERLAY LAID OVER SAFETY NETTING NOTCHED FLASHING FOLDED & FIED THROUGH RIBS WITH 12g 65mm STEEL TEK SCREW WALL CLADDING STRUCTURAL STEEL WALL UNDERLAY (if required) Z STEEL GIRT & CLEAT ROOF PITCH 10 VERY HIGH WIND ZONE. ROOF PITCH < 10 ETRA WIND ZONE. 130mm 50mm 70mm 90mm C-TRS9-05 HEAD BARGE DETAIL
7 METAL OVER FLASHING CHASE INTO 20x10 GROOVE AND SEALED WITH SEALANT PROFILED FOAM CLOSURE (only required in high risk situations of wind blown moisture entering) CONCRETE WALL SCREW FIING WITH 12x55 STEEL TEK & NEO WITH SELECTED WASHER SYSTEM HEM TO FLASHING EDGE BMT 0.55 APRON FLASHING NOTCHED TURN-DOWN OVER ROOFING, 5mm GAP MA TO CLEAR OF TROUGH OR ROOFING ROOF PITCH 3 MIN. ROOFING UNDERLAY LAID OVER SAFETY NETTING 20 MIN. GAP STOPEND SHEET STEEL PURLIN STRUCTURAL STEEL ROOF PITCH mm VERY HIGH WIND ZONE. ROOF PITCH < 10 ETRA WIND ZONE. C-TRS9-06 APRON DETAIL - HEAD - CHASED
8 E 50mm H3.2 TIMBER CAPPING SUPPORT ON DPC SEPERATION BARRIER BETWEEN CONCRETE & FLASHING (SELF ADHESIVE TAPE OR SIM) BMT 0.55 PARAPET FLASHING 5 MIN. FI CAPPING TO CONCRETE WITH MASONRY FASTENERS AT 600mm crs PROFILED FOAM CLOSURE (only required in high risk situations of wind blown moisture entering) SCREW FIING WITH 12x55 STEEL TEK & NEO WITH SELECTED WASHER SYSTEM HEM TO FLASHING EDGE BMT 0.55 APRON FLASHING NOTCHED TURN-DOWN OVER ROOFING, 5mm GAP MA TO CLEAR OF TROUGH OR ROOFING ROOF PITCH 3 MIN. CONCRETE WALL ROOFING UNDERLAY LAID OVER SAFETY NETTING STOPEND SHEET STEEL PURLIN STRUCTURAL STEEL 20 MIN. GAP ROOF PITCH mm VERY HIGH WIND ZONE. ROOF PITCH < 10 ETRA WIND ZONE. C-TRS9-07 APRON DETAIL - HEAD - PARAPET
9 min gap min. cover METAL OVER FLASHING CHASE INTO 20x10 GROOVE AND SEALED WITH SEALANT BMT 0.55mm 2 PIECE APRON FLASHING TO COVER 12x55mm STEEL TEK & NEO WITH SELECTED WASHER SYSTEM CONCRETE WALL SCREW FIING WITH 12x25 TYPE 17 TEK & NEO OR 4.8mm ALUM RIVETS MIDSPAN WHERE APPLICABLE 10 Y HEM TO FLASHING EDGE 5mm GAP MA TO CLEAR OF TROUGH OR ROOFING ROOFING UNDERLAY LAID OVER SAFETY NETTING STEEL PURLIN Y ALL WIND ZONES C-TRS9-08 APRON DETAIL - SIDE - CHASED
10 min gap min. cover E 50mm H3.2 TIMBER CAPPING SUPPORT ON DPC SEPERATION BARRIER BETWEEN CONCRETE & FLASHING (SELF ADHESIVE TAPE OR SIM) BMT 0.55 PARAPET FLASHING BMT 0.55mm 2 PIECE APRON FLASHING TO COVER 5 MIN. FI CAPPING TO CONCRETE WITH MASONRY FASTENERS AT 600mm crs Z 12x55mm STEEL TEK & NEO WITH SELECTED WASHER SYSTEM SCREW FIING WITH 12x25 TYPE 17 TEK & NEO OR 4.8mm ALUM RIVETS MIDSPAN WHERE APPLICABLE 10 Y HEM TO FLASHING EDGE 5mm GAP MA TO CLEAR OF TROUGH OR ROOFING CONCRETE WALL ROOFING UNDERLAY LAID OVER SAFETY NETTING STEEL PURLIN ROOF PITCH 10 VERY HIGH WIND ZONE. ROOF PITCH < 10 ETRA WIND ZONE. Z 50mm 70mm 90mm C-TRS9-09 APRON DETAIL - SIDE - PARAPET
11 PIPE EPDM FLEIBLE CONE SLEEVE MALLEABLE FLANGE, SCREW OR RIVET FIED, AND SEALED TO ROOFING PROFIL FIT NEOPRENE WASHERS TO ALL SCREW FIINGS Fall NOTE: (1) MA. ROOF PITCH FOR THIS FLASHING 45, MINIMUM PITCH 10 IF BASE OF FLANGE COVERS OVE OR MORE COMPLETE TROUGHS. (2) FOR PIPES UP TO 85mm DIAMETER (3) NZMRM CODE OF PRACTICE ALLOWS LARGER THAN 85mm DIAMETER PENETRATION PROVIDED THE FLASHING DOES NOT ETEND TO MORE THAN 50% OF PAN WIDTH (4) INSTALL ADJACENT TO PURLIN FOR SUPPORT WHERE POSSIBLE. NO PANS TO BE FULLY BLOCKED OFF BY PIPE OR DEKTITE FLASHING FIED DIAGONALLY TO ROOFING PROFILE TIO MINIMISE HOLDING OF DIACHARGE WATER C-TRS9-10 NTS PIPE PENETRATION DETAIL UPTO 85mm
12 TOP RIDGE SOAKER FLASHING TO BE FULLY SUPPORTED BY ROOFING UNDER HEM TO EDGE SEAL AND FASTEN ROOF FIING NOTCHED TURN-DOWN OVER TRS 9. 5mm MA. GAP BETWEEN PAN AND EDGE OF FLASHING EPDM FLEIBLE BOOT FLASHING SCREW FIED AND SALED TO METAL SOAKER FLASHING. FIT NEOPRENE WASHERS UNDER SCREWS 130mm NOTE: (1) SUITABLE FOR PIPES FROM 86mm TO 500mm DIAMETER (2) SUITABLE ONLY FOR ROOF PITCHES OF 10 OR MORE VERY HIGH OR ETRA WIND ZONE. C-TRS9-11 1:30 NTS PIPE PENETRATION DETAIL UPTO 500mm
ThermoSpan EPS. Metalcraft COMMERCIAL ROOFING CREPS. Insulated Panel Systems DETAIL LIST
ThermoSpan EPS DETAIL LIST 00 / 15 COVER SHEET 01 / 15 RIDGE DETAIL 02 / 15 HEAD FLASHING DETAIL 03 / 15 EAVES GUTTER DETAIL 04 / 15 INSULATED GUTTER 05 / 15 INSULATED BOX GUTTER 06 / 15 BARGE CAPPING
More informationHILAND TRAY FORM AND FUNCTION MATERIAL SPECIFICATIONS DESIGN GUIDE ROOFING I WALLING
HILAND TRAY ROOFING I WALLING DESIGN GUIDE FORM AND FUNCTION Hiland Tray is a modern 455mm wide tray roofing and walling system, roll formed onsite with a mobile roll forming facility in long single lengths
More informationFinesse Profiles. Nailstrip
Installation Details Profile and Lap Detail 265/465 38mm NAILSTRIP *other widths available CD GRADE PLYWOOD 19mm STRUCTURE SILICONE * MIN 20mm VENTILATION GAP * WHEN ROOF PITCH IS UNDER 7.5 OR TOTAL COMBINED
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More informationC.00. Ullrich Aluminium Co. Ltd. Ulltraclad Aluminium Cladding September Wall Batten Elevation. Horizontal battens between verticals at soffit
Horizontal battens between verticals at soffit 2 C.04 600 600 600 600 Cavity batten at 600 mm centres 1 C.03 Batten fixing points 1 C.04 1 C.07 1 C.12 1 C.13 1 C.14 Meter Box Window 1 C.08 1 C.09 800 800
More information900 SERIES PANEL SHEET INDEX STAGGERED ENDLAP STAGGERED MALE LEG AT ENDLAP CONTINUOUS FEMALE ENDLAP INSTALLATION SEQUENCE CI-WR
900 SERIES PANEL CI-DS-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-EL-01-900 CI-EL-02-900 CI-EL-03-900 CI-EL-04-900 CI-EL-05-900 CI-EL-06-900 CI-EL-07-900 CI-EL-08-900 CI-RD-01-900 CI-RD-02-900 CI-RD-03-900 CI-EV-01-900
More informationTYPICAL BARGE DETAIL - CROSS SECTION
SELECTED OWENS CORNING ASPHALT SHINGLES APPLY A BEAD OF BITUMASTIC ADHESIVE/SEALANT METAL BARGE DRIP EDGE FLASHING No15 RAG FELT ROOF UNDERLAY PLYWOOD ROOF FRAME BARGE BOARD SOFFIT LINING (IF APPLICABLE)
More informationEuro-Tray Roll Cap. Specific Profile Data Sheet BACK. Table of Contents. Technical Drawing File Downloads
Specific Profile Data Sheet 1 Technical Drawing formats available AutoDesk DWG Format AutoDesk RVT Format PDF Format Euro-Tray Roll Cap Table of Contents General Profile Information 2 Material Specifications
More informationCURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START
ROOF ATTACHED VERANDAH ASSEMBLY INSTRUCTIONS Your supplementary guide to building an ATTACHED ROOF VERANDAH or PATIO This set of instructions should be used in conjunction with the Stratco instruction
More informationWhen you need a clearspan of up to 6 metres of longrun steel you need...
YEARS OF BUILDING TECHNOLOGY When you need a clearspan of up to 6 metres of longrun steel you need... The proven longrun roofing and cladding system STYLISH Bold profile. High rib (75mm). Internal partitioning.
More informationALPINE TRAY. To get the best from this product please follow these recommendations.
F I X I N G D E TA I L S ALPINE TRAY The standing seam roofing profile is designed to withstand some of New Zealand s harshest weather in our toughest environments. To get the best from this product please
More informationTABLE OF CONTENTS A. PBR
TABLE OF CONTENTS A. PBR Panel 1. PBR Panel Architect/Engineer Information....................................... 2 2. PBR Panel UL 90 Requirements............................................... 3 3. PBR
More informationREGAL. Installation Manual
REGAL Installation Manual General Information The details shown on the following pages are suggestions or guidelines for installing the Regal system. The installation details shown here are proven methods
More informationTABLE OF CONTENTS A-1
TABLE OF CONTENTS PAGE NUMBER: DETAIL DESCRIPTION A-1...TABLE OF CONTENTS A-2...GENERAL NOTES B-1...GENERAL INFORMATION C-1...EAVE DRIP DETAIL C-2...EAVE DRIP with GUTTER DETAIL C-3 & C-4...FIXED RIDGE
More information400 SERIES VERTICAL INSTALLATION
CI-DS-01-400V CI-PJ-01-400V CI-PJ-02-400V CI-PJ-03-400V CI-BS-01-400V CI-BS-02-400V CI-BS-03-400V CI-BS-04-400V CI-BS-05-400V CI-OC-01-400V CI-OC-02-400V CI-IC-01-400V CI-IC-02-400V CI-FO-01-400V CI-FO-02-400V
More informationPipe penetration refer CT15. Viking CertainTeed Shingles General Roof details
Vented ridge refer CT02 Substrate Viking SuperStrand or F11 Roofing ply Pipe penetration refer CT15 Valley details refer CT07 and CT08 refer CT17 and CT18 for requirements Drip-edge refer CT01 Barge detail
More informationFibre Cement G C. Batten Fixing Setout ST-01. Jan 2014 A4 PROFILE DATE SCALE DETAIL DETAIL NO. Plank joint. 600mm stud crs.
Plank joint 600mm stud crs 600mm 600mm 600mm Horizontal Structural Timber Cavity atten 50x20mm H3.1 atten fixing points 800mm 800mm 300mm 800mm Max. Nog spacing 50mm All intermediate battens to be 50x20mm
More informationVerge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip
Tolerance Detail (recommended) Verge Closure Verge Channel Verge Clip Verge Flashing VERGE CHANNEL RIVETTED TO EUROSEAM AT APPROX 400MM CENTRES USING 4.8 X 12MM RIVETS. NB: DO NOT RIVET AT HALTER POSITION
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationTuff-Rib Install Guide
Install Guide bestbuymetalroof.com Page 2 of 27 Page 3 of 27 1. Page 4 2. a. Installation Guide b. Panel Squaring Pages 5, 6 Pages 7, 8 3. Pages 9, 10 4. a. Fascia (optional) b. Eave / 1.5x3.5 Angle c.
More informationTremLock T-138 INSTALLATION MANUAL T-138 www.tremcoroofing.com 3735 Green Road Beachwood, Ohio 44122 1.800.852.6013 50 Beth Nealson Drive Toronto, Ontario M4H 1M6 1.800.668.9879 7241 6/8/18 TABLE OF CONTENTS
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More informationGlobal Roofing Solutions Klip-Tite
GRS Klip-Tite Global Roofing Solutions Klip-Tite www.globalroofs.co.za marketing@globalroofs.co.za GRS Klip-Tite GRS Klip-Tite 09/18 Typical Specification Materials The roofing shall be Klip-Tite profile,
More informationSHED PACK Step 1: Choose your shed type.
SHED PACK Step 1: Choose your shed type. Industrial Shed Open FarmShed Shed Pack / Types of Sheds Drawing # S0104.A001 Hanger Shed =DISCLAIMER= Please read and agree to Purlin Brackets Terms and Conditions
More informationTable of Contents Light Gauge Metal Roof & Wall Panels
Table of Contents Light Gauge Metal Roof & Wall Panels Installation Guide for Delta Rib, Nor-Clad, Strata Rib & 2-1/2 Corrugated Introduction Important Notice Notes: April 2008 Minimum Recommended Tools
More informationSHED PACK. Sheds are commonly constructed using portal frames.
SHED PACK Sheds are commonly constructed using portal frames. This pack relates to purchasing portal frame purlin bracket sets. Ruest our free generic engineered and certified shed plans. SHED PACK Step
More informationGlobal Roofing Solutions Klip-Lok 406 Aluminium
GRS Klip-Lok 406 Global Roofing Solutions Klip-Lok 406 Aluminium www.globalroofs.co.za marketing@globalroofs.co.za GRS Klip-Lok 406 GRS Klip-Lok 406 Alum. 09/18 Typical Specification Materials The roofing
More informationDUTCH GABLE FREESTANDING CARPORT
DUTCH GABLE FREESTANDING CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building a FREESTANDING Outback DUTCH GABLE CARPORT BEFORE YOU START Carefully read these instructions. If
More informationNutec Bigsix Roofing Accessories
Nutec Bigsix Roofing Accessories Nutec Bigsix Close Fitting Adjustable Ridge Capping (Grey) Adjustable for 0º - 0º pitches 70-000 87 mm 70-00 87 mm Nutec Bigsix Close Fitting Adjustable Ridge Capping (Terracotta)
More informationConstruction details: Master-C type profiles and joints:
Construction details: Master-C type profiles and joints: Master-C 3g 32 mm. (1 1/4 ) 1000 mm. (39 3/8 ) outer face inner face 10.5 fixing details: sealing washers shall be installed through a 2-3/8 x 1-9/16
More informationBasic Fitting Details No. 1
No. 1 Fixing free edges of flashings A. Clips for flashings over interlocking tiles B. Clip to ridge or hip roll C. Clip to apron flashings Clips should be made from quarter hard copper, 0.6mm thick, terne
More informationEverbright E610 polycarbonate light panels Installation guidance
Everbright E610 polycarbonate light panels Installation guidance Mono-pitched applications: Eaves For pitched roofs above 0-degree fix aluminium angle EL17 to supporting structure with self drilling screws
More informationKlip-Lok 406 Aluminium
Klip-Lok 406 Alumin GRS Klip-Lok 406 Global Roofing Solutions TM Klip-Lok 406 Aluminium Talk to THE SMART ROOF PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za GRS Klip-Lok 406 GRS Klip-Lok
More informationInstallation Guide. for Ampelite Industrial Sheeting STD. Premium Industrial Sheeting. Industrial Grade Fibreglass. Industrial Grade Fibreglass
Installation Guide for Ampelite Industrial Sheeting Premium Industrial Sheeting STD Industrial Grade Fibreglass Industrial Grade Fibreglass Industrial Grade Fibreglass AS/NZS ISO 9002 Licence QEC 4787
More informationInstallation Guide. Step 3. Valley Flashing. Step 7. Transition Flashings and Accessories. Step 6. Hip and Ridge Installation
Step 7. Transition s and Accessories Step 3. Valley Step 6. Hip and Ridge Installation Step 2. Rake Trim Step 5. Installing the Shingles Step 1. Eave Starter Installation Step 4. Endwall s Installation
More informationBBS Rusticated & Splaycut Cavity System
BBS Rusticated & Splaycut Cavity System 2018 www.bbstimbers.co.nz www.cedarcorp.co.nz BBS Rusticated & Splaycut Weatherboard Cavity Wrap System Installation Specifications 1.0 General Information Introduction
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationGlobal Roofing Solutions Klip-Lok 700
GRS Klip-Lok 700 Global Roofing Solutions Klip-Lok 700 www.globalroofs.co.za marketing@globalroofs.co.za GRS Klip-Lok 700 GRS Klip-Lok 700 09/18 Typical Specification Materials The roofing shall be Klip-Lok
More informationSafety Glasses Safety Gloves Ladders Measuring Tape Spirit Level String Line. Tin-Snips Rivet Gun Caulking Gun Silicone Socket Set
BEFORE YOU START Carefully read these instructions and refer to them constantly during each stage of construction. If you do not have all the necessary tools or information, contact Stratco for advice.
More informationCLEARSPAN GABLE STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. WITH GAZEBO END ATTACHED PATIO
CLEARSPAN GABLE WITH GAZEBO END ATTACHED PATIO STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your supplementary guide to building an ATTACHED CLEARSPAN GABLE VERANDAH or PATIO WITH GAZEBO END This set of instructions
More informationTuff Rib Panel Installation Specifications
Tuff Rib Panel Installation Specifications ROOF APPLICATION: Roof slope must be a minimum of a 2/12 pitch to use this product. For slopes lower than a 3/12 pitch, lap sealant is suggested on the side laps
More informationGlobal Roofing Solutions Brownbuilt
GRS Brownbuilt Global Roofing Solutions Brownbuilt www.globalroofs.co.za marketing@globalroofs.co.za GRS Brownbuilt GRS Brownbuilt 09/18 Typical Specification Materials The roofing / side cladding shall
More informationSpeedDeck. Fixing and Handling Guide
SpeedDeck Section 1 Delivery/Storing On Site/Handling l SpeedDeck is factory or on-site manufactured. l Straight SpeedDeck bundles are a maximum 1 tonne, sheets nestled and banded with polypropylene or
More information401 SW 33rd Ave Ocala, FL
401 SW 33rd Ave Ocala, FL 34474 352-622-1035 www.metalroofingofocala.com Table of Contents Panels...Pg.1 Ultra Rib Trim...Pg.2-4 PBR Trim...Pg.5-6 5V Trim...Pg.7-9 TCM-Lok...Pg.10-11 Insulation/Ventilation:
More informationinstallation guide Villa
installation guide Villa Table of Contents Introduction............................. 2 Safety................................... 2 Tools.................................... 2 Codes & Requirements....................
More informationGLOSSARY. A useful collection of definitions for commonly used terms in tile roofing.
A useful collection of definitions for commonly used terms in tile roofing. Abutment Where the roof tiles meet a structure rising above the roof. Accessory A concrete or terracotta product used to finish
More informationEurostyle SPANlok PROFILE TECHNICAL SUMMARY. Description. Spanlok 450. Dimensioned Drawing of Spanlok 450 with swages
Eurostyle SPANlok PROFILE TECHNICAL SUMMARY (All dimensions are nominal and in mm) 8 89 160 89 0 (ex 6mm coil) Spanlok 0 3 (effective cover) Dimensioned Drawing of Spanlok 0 with swages 8 8 84 84 84 8
More informationDUTCH GABLE CARPORT RECOMMENDED INSTRUCTION MANUAL
DUTCH GABLE CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction 2 Components 3 Step 1a Marking out the Perimeter of the Carport with Footing only 4 Step 2a Footing Set-Out for Concrete
More information2 ½ Corrugated Panel Installation Specifications
2 ½ Corrugated Panel Installation Specifications ROOF APPLICATION: Roof slope must be a minimum of a 2/12 pitch to use this product. When using this product butyl lap sealant is recommended for all slopes.
More informationPBR Panel Installation Specifications
4906 St. Stephens Rd. 5780 Hwy 90 W Eight Mile, Al 36613 Theodore, AL 36590 251 456 2254 251 653 1550 251 457 2254(F) 251 653 1514(F) PBR Panel Installation Specifications ROOF APPLICATION: Roof slope
More informationTuff-Rib. Installation Manual. Nationwide supplier of quality metal roofing. Toll-Free (800) S. Lee Hwy. Cleveland, TN 37311
Installation Manual Nationwide supplier of quality metal roofing. 65 S. Lee Hwy. Cleveland, TN 7.. www.bestbuymetals.com Toll-Free (800) 78-00 IMPORTANT NOTICE This manual contains suggestions and guidelines
More informationMetroCOTTAGE Shingle
Batten-less Installation Sept. 14, 2017 INSTALLATION WARNING! These install details are provided to demonstrate a recommended installation method for Metro Roof panels and accessories. used in the United
More informationskypod INSTALLATION GUIDE Issue 2 CONTENTS 1. Preparing to install 3 2. Installation 4 3. Installing jack rafters Installation examples 11
skypod INSTALLATION GUIDE Issue 2 CONTENTS 1. Preparing to install 3 2. Installation 4 3. Installing jack rafters 10 4. Installation examples 11 INSTALLATION GUIDE SURVEYING WARNING 1.2 Good surveying
More informationNEW skypod INSTALLATION GUIDE
NEW skypod INSTALLATION GUIDE NOW INCLUDES ACUTE CONTENTS 1. Preparing to install 2 2. Installation 4 3. Installing jack rafters 10 4. Installation examples 11 If in doubt at any stage Please contact the
More informationTHESE DETAILS ARE PROVIDED AS A GUIDELINE FOR PROPER PANEL AND ASSOCIATED COMPONENT INSTALLATION, AND ARE BASED ON INDUSTRY ACCEPTED PRACTICES.
FRKPV-DS-01-MTLH FRKPV-PJ-01-MTLH FRKPV-PJ-02-MTLH FRKPV-PJ-03-MTLH FRKPV-FS-01-MTLH FRKPV-FS-02-MTLH FRKPV-BS-01-MTLH FRKPV-BS-02-MTLH FRKPV-BS-03-MTLH FRKPV-BS-04-MTLH FRKPV-OC-01-MTLH FRKPV-IC-01-MTLH
More informationInstallation guide for 20/20
Introduction The following installation instructions are recommended minimum requirements for the 20/20. The designer and fixer should ensure that tiles are installed in accordance with BS 5534; The British
More informationTable of Contents. Roof to Head Wall w/ Side Flashing DECRA Shake XD Roof Overview Roof Penetration - Pipes & Vents...
Table of Contents DECRA Shake XD Roof Overview.... 2 DECRA Shingle XD Roof Overview.... 3 Introduction... 4 Safety... 4 Tools.... 4 Estimating Sheet... 4 Codes & Requirements... 4 Roof Slope... 4 Underlayment...
More informationTRADITIONAL GABLE ATTACHED PATIO AND CARPORT. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT
TRADITIONAL GABLE ATTACHED PATIO AND CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT BEFORE YOU START Carefully read
More informationBest Buy Metals Toll Free / Phone / Fax
DETAIL MANUAL for Vertical Seam Best Buy Metals Toll Free 1-800-728-4010 / Phone 423-479-6382 / Fax 423-728-3066 www.bestbuymetals.com Vertical Seam Roofing Panels Fig. 2 Vertical Seam Has 1-3/4" high
More informationINSTALLATION DETAILS
INSTALLATION DETAILS Front Issued January 23rd, 2005 These install details are provided to demonstrate the recommended installation method for Metro Roof products and accessories. The details and information
More informationStratco Sanctuary INSTALLATION BEFORE YOU START TOOLS REQUIRED GUIDE
INSTALLATION GUIDE Stratco Sanctuary Verandahs, Patios and Carports BEFORE YOU START It is important to check with your Local Government Authority prior to the installation of your new Stratco Sanctuary
More informationONDUVILLA. The Attractive Alternative to Shingles I N S T A L L A T I O N I N S T R U C T I O N S
ONDUVILLA The Attractive Alternative to Shingles I N S T A L L A T I O N I N S T R U C T I O N S 1 INSTALLATION INSTRUCTIONS Even though ONDUVILLA is easy to install, it is important to read through these
More informationSandtoft installation guides
a The Sandtoft Multiverge system has been specially designed to suit most single lap large format concrete and clay roof tiles (suits batten gauges from 280 to 345mm). The system is extremely quick and
More informationextend your outdoor lifestyle
extend your outdoor lifestyle www.laserlite.com.au Up to 50% better heat reduction than standard sheet # only Laserlite has the technology Laserlite is the only polycarbonate sheet product in Australia
More informationKS42 MF SERIES - HORIZONTAL INSTALLATION
CI-DS-01-KSMF H CI-PJ-01-KSMF H CI-PJ-02-KSMF H CI-PJ-03-KSMF H CI-PJ-04-KSMF H CI-PJ-05-KSMF H CI-PJ-06-KSMF H CI-PJ-07-KSMF H CI-PJ-08-KSMF H CI-PJ-09-KSMF H CI-PJ-10-KSMF H CI-PJ-11-KSMF H CI-PJ-12-KSMF
More informationRoll-Fix Kit The complete dry hip kit RFIG
H I P Roll-Fix Kit The complete dry hip kit RFIG.045-0906-1 Roll-Fix is a quick and simple dry-fix roofing kit for hips. l Quick and easy to install no special tools required l Universal application fits
More informationINSTALLATION GUIDE LEARN MORE AT DECRA.COM
Villa Tile INSTALLATION GUIDE LEARN MORE AT DECRA.COM Table of Contents DECRA Villa Tile Roof Overview... 2 Introduction... 3 Safety... 3 Tools.... 3 Estimating Sheet... 3 Codes & Requirements... 3 Roof
More informationHOLLOW CORRUGATED SHEETS
P R O D U C T C A T A L O G U E HOLLOW CORRUGATED SHEETS www.tuflite.com Bangalore (Head Office) #240/1, Ganesh Krupa, 18th Cross, Sadashivanagar, Bangalore- 560 080, India P: +91 80 4252 5252 F: +91 80
More informationLIFE TIME. polycarbonate sheeting
LIFE TIME polycarbonate sheeting blocks Enjoy the freedom of outdoor living safe from UV danger Solasafe polycarbonate sheeting provides 99.9% protection from harmful UV rays that cause sunburn and skin
More informationOWENS CORNING LAMINATE SHINGLES INSTALLATION INSTRUCTIONS
General This Installation Instruction document for Owens Corning asphalt roofing shingles is to be read in conjunction with the Installation information printed on each packet of shingles along with the
More informationskypod INSTALLATION GUIDE CONTENTS Issue 2 If in doubt at any stage NOW INCLUDES ACUTE BE SAFE WHEN WORKING AT HEIGHT
skypod INSTALLATION GUIDE Issue 2 NOW INCLUDES ACUTE CONTENTS 1. Preparing to install 2 2. Installation 4 3. Installing jack rafters 10 4. Installation examples 11 BE SAFE WHEN WORKING AT HEIGHT Ensure
More informationHugger Installation. Roof Hugger, LLC P: P.O. Box 1027 F: Odessa, FL
RECEIVING MATERIALS: ROOF HUGGERS are typically placed on wood pallets 3-5 wide and approximately 10 long weighing up to 5,000 lbs. ROOF HUGGERS are shipped via closed van for LTL less than truckload quantities
More informationDETAIL MANUAL. Metal Roofing Wholesalers. Classic Rib Roofing Panels
Metal Roofing Wholesalers Classic Rib Roofing Panels DETAIL MANUAL 1178 Topside Rd Louisville, TN 37777 The Classic Rib Roofing Panel Figure 1 House With Classic Rib Metal Roofing Installed Classic Rib
More informationSkypod. Pitched PVC-U skylights. Installation guide PITCHED PVC-U SKYLIGHTS ISSUE 1
Skypod Pitched PVC-U skylights PITCHED PVC-U SKYLIGHTS Installation guide ISSUE 1 Skypod pitched PVC-U skylights Installation guide Contents 1. Surveying 3 2. Installation 4 3. Additional information 10
More informationTable of Contents. Fasteners... 4 Venting Preparation Installation with Battens - DECRA Tile & DECRA Shake 1
Table of Contents DECRA Tile & Shake Roof Overview... 2 Introduction... 3 Safety... 3 Tools.... 3 Estimating Sheets... 4 Codes & Requirements... 4 Roof Slope... 4 Underlayment... 4 Deck Preparation....
More informationMETRO PANELS (EXPOSED
METRO PANELS 001EX-METRO-PANELS.VSD STARTER EAVE Detail Metro V-Bat RISER METAL (1) PANELS (2) FASTENERS (5) BOTTOM ROW fastening 0.75in. (4) METRO RISER Metal, With Integral Batten Riser & Locator-Lip.
More informationINSTALLATION WARNING! These install details are provided to demonstrate a recommended installation method for Metro Roof panels and accessories.
Issued December 29, 2005 evised July 5, 2013 INSTALLATION WANING! These install details are provided to demonstrate a recommended installation method for Metro oof panels and accessories. practices used
More informationSpeedZip. Fixing and Handling Guide
Section 1 Delivery/Storing On Site/Handling l SpeedZip is factory or on-site manufactured. l Straight SpeedZip bundles are a maximum 1 tonne, 2 No. sheets nestled and then and placed face to face, banded
More informationTIOGA Table of Contents
Table of Contents TABLE OF CONTENTS Product Data Sheet...2 Engineering Data...3 General Information...4 Handling...5 Roof Preparation...5 Fastening Recommendations...6 Field Cutting...7 Touch-up Paint...7
More informationSTEEL FRAMING WEATHERBOARD SYSTEM
T A R A NAK IPINE STEEL FRAMING WEATHERBOARD SYSTEM Installation information and technical drawings TIMBER WEATHERBOARDS NATURALLY BETTER FOR MORE THAN A CENTURY www.taranakipine.co.nz T A R ANAKIPINE
More informationTable of Contents. Important Notices 3. Residential Roofing Application 4. Trims & Accessories 5. Trim Glossary 6, 7, 8. Estimating Material 9
Table of Contents Page(s) Important Notices 3 Residential Roofing Application 4 Trims & Accessories 5 Trim Glossary 6, 7, 8 Estimating Material 9 Eave Trim Installation 10 Connecting Eavestarters 10 Gable
More informationMULTISPAN GABLE WITH HIP END ATTACHED PATIO
MULTISPAN GABLE WITH HIP END ATTACHED PATIO STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your supplementary guide to building an ATTACHED MULTISPAN GABLE VERANDAH or PATIO WITH HIP END This set of instructions
More informationDW VERTICAL INSTALLATION
AR-PJ-01-DW5V AR-PJ-02-DW5V AR-PJ-03-DW5V AR-PJ-04-DW5V AR-BS-01-DW5V AR-BS-02-DW5V AR-OC-01-DW5V AR-OC-02-DW5V AR-OC-03-DW5V AR-IC-01-DW5V AR-IC-02-DW5V AR-IC-03-DW5V AR-FO-01-DW5V AR-FO-02-DW5V AR-FO-03-DW5V
More information15 YEAR GUARANTEE. Tough and long lasting Guaranteed waterproof for 15 years Economical and easy to fix AVAILABLE IN A RANGE OF COLOURS
INSTALLATION GUIDE AVAILABLE IN A RANGE OF COLOURS 15 YEAR GUARANTEE Tough and long lasting Guaranteed waterproof for 15 years Economical and easy to fix Coroline corrugated bitumen sheet is a tough lightweight
More informationMetroll. Purlins & Girts. C Section Purlins. C Section Purlins are manufactured from Galvaspan steel and are roll formed into C Section.
C Section Purlins C Section Purlins are manufactured from Galvaspan steel and are roll formed into C Section. Metroll C Section Purlins are recommended for simple, non-continuous span construction. Structural
More informationSECTION SLATE SHINGLES. 1.1 SUMMARY A. Section Includes: 1. Slate shingles over underlayment nailed to roof sheathing.
SECTION 07 31 26 SLATE SHINGLES SPEC WRITER NOTES: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Slate shingles
More information1 Roof Substrate (Deck) OWENS CORNING BERKSHIRE SHINGLES INSTALLATION INSTRUCTIONS
General This Installation Instruction document for Owens Corning Berkshire roofing shingles is to be read in conjunction with the Installation information printed on each packet of shingles along with
More informationTalk to us, THE SMART ROOF PEOPLE Visit or Global Roofing Solutions Brownbuilt
Talk to us, THE SMART ROOF PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za Global Roofing Solutions Brownbuilt Typical specification Materials The roofing / side cladding shall be Brownbuilt
More informationBBA BRITISH BOARD OF AGREMENT CERTIFICATE NO. 87 / 1823 / C
Fixing Guide BBA BRITISH BOARD OF AGREMENT CERTIFICATE NO. 87 / 1823 / C Onduline Fixing Guide Introduction Onduline is the world s largest manufacturer of bituminous corrugated sheets. Onduline roofing
More informationSteel Roofing & Siding INSTALLATION GUIDE
Steel Roofing & Siding INSTALLATION GUIDE Your Authorized Dealer is: WASHINGTON Auburn (800) 700-7228 WASHINGTON Spokane (866) 321-5954 www.nuraymetals.com CALIFORNIA Redlands (800) 806-8729 CONTENTS BEFORE
More informationGIRTS ON BACK OF BUILDING
GIRTS ON BACK OF BUILDING ALL GIRTS ARE 1 1/2 SQUARE TUBE. GIRT LENGTHS FOR 12, 20, 24, AND 30 WIDE BUILDINGS: ON 12 WIDE BUILDINGS GIRTS ARE 67 3/4 LONG ON 20 WIDE BUILDINGS GIRTS ARE 56 3/4 LONG ON 24
More informationVENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24" C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4
GABLE FLASHING FASTENER @ 24" C/C MAX. ROOF PURLIN BUTYL SEALANT TAPE FLASH AB-1, AB-2, AB-3, OR AB-4 FASTENER @ EVERY MAJOR RIB OR 12" C/C MAX. F-J TRIM FABRAL ALUMINUM SOFFIT FASTENER 24" C/C MAX. BUTYL
More informationWHY YOU SHOULD USE TUFFLOOR. components
Tuffloor DESIGN GUIDE WHY YOU SHOULD USE TUFFLOOR Strong and Easily Installed Tuffloor is a steel floor framing system designed for strength and ease of installation, and is an easy and economical alternative
More information4256HM JAMES HARDIE MONOLITHIC CLADDING
4256HM JAMES HARDIE MONOLITHIC CLADDING 1. GENERAL This section relates to the supply and fixing of fibre cement flush finish cladding: - James Hardie Monotek Sheet for textured coating systems - James
More informationSystem for 2+ Level Buildings
Issued Sept 205 Contact Info@symonite.co.nz System for 2+ Level Buildings Typical Details Issued: September 205 TYPICAL DETAILS CONTENTS.0 TYPICAL VERTICAL JOINTS 2.0 EXT. CORNER / TYPICAL HORIZONTAL JOINT
More informationSTOPOREN FACADE SYSTEM TIMBER WINDOW JOINERY - HEAD DETAIL
INTERNAL LINING TIMBER LINTEL AS PER NZS 3604 FLEXIBLE FLASHING TAPE INSTALLED OVER AT AIRSEAL ON CORNERS PEF ROD GAP 7.5-8mm APPROX 35 RENDER 20mm DRAINED & VENTED CAVITY - BATTENS AT 300-600mm MAX.CTRS.
More informationThompson Architectural TM-RIB PANEL ACCESSORY DETAIL GUIDE
TM-RIB PANEL ACCESSORY DETAIL GUIDE FL11101.1 FL11101.2 TA125 (UL580 Class 90) Certified Thompson Architectural Metal Roofing is proud to be a partner of the Energy Star Roof Products Program SINGLE SOURCE
More informationL:\Document Control\DR Drafting\Records\Royce\Facades\Plank\US BenchmarkTM By Kingspan 40% RGB Gold 2013.jpg FACADES - BRICK INDEX SHEET
KPV-DS-01-BRH KPV-PJ-01-BRH KPV-PJ-02-BRH KPV-PJ-03-BRH KPV-BS-01-BRH KPV-BS-02-BRH KPV-BS-03-BRH KPV-OC-01-BRH KPV-IC-01-BRH KPV-FO-01-BRH KPV-FO-02-BRH KPV-FO-03-BRH KPV-SJ-01-BRH KPV-PR-01-BRH KPV-LE-01-BRH
More informationMAXIMUM PANEL ATTACHMENT FASTENER SPACING IS 24" O.C. ALL FASTENERS TO PENETRATE WOOD 3/4" MIN. AND METAL FRAMING 1/2" MIN.
PLYWOOD SHEATHING DMI SOFFIT PANEL #10-13 GP PANCAKE HEAD (JC) - J CLOSURE (LC) - L CLOSURE #9-15 X 1 1/2" WOODZAC GP APPROVED MOISTURE BARRIER SOFFIT TO WALL PANEL WPRP-H-01-00 APPROVED MOISTURE BARRIER
More informationTable of Contents. Installation Guide for Profile with Hidden Fasteners 3. Installation Steps 4, 5. Prestige Series Moldings 6, 7. Other Accessories 8
1 Table of Contents Page(s) Installation Guide for Profile with Hidden Fasteners 3 Installation Steps 4, 5 Prestige Series Moldings 6, 7 Other Accessories 8 Trims & Accessories 9 Eave Starters 10 Gableboards
More information