ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Transcription

1 HOVE ROE ASSEMLY INSTRUCTIONS. IMPORTANT - RETAIN OR UTURE REERENCE - REA CAREULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services on Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty. Should you need to return the unassembled product, please repack in the original packaging. IMPORTANT We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. Carefully check that you have all parts before beginning assembly. Keep fittings out of children's reach and keep children well away from the construction area. We recommend that the packaging is used to protect the surfaces during assembly. A minimum of 2 persons is required to assemble this product. Wall fixings are not included. Not suitable for use in bathrooms. We recommend the use of the wall attachment bracket/strap provided for safety reasons. o not use this item if any structual part is broken or missing. PROUCT INORMATION Made from M with painted finish. Made in Poland. CARE INSTRUCTIONS or general cleaning, periodically dust with a soft cloth. o not rub or scrub the surface when cleaning. Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish. Use non-silicone beeswax to maintain the shine. o not use furniture polish. Use a furniture oil periodically to maintain the finish and prevent the oil from drying out. Any spills should be removed immediately with a soft clean damp cloth and dried immediately. Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or damage. o not put hot dishes directly on the surfaces of the item. Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping. Never drag pieces of furniture across the floor as this will cause damage to the joints. All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary. Page 1 of 8

2 ITTINGS x 33 CA x 4 C x 29 x 7 EA x 2 E x 12 EC x 6 x 22 ø8x36 mm Cambolt G x 4 ø15x12 mm Camlock H x 4 ø15x15 mm Camlock H x 6 ø5,8x36 mm Wooden owel x 6 ø4x12 mm x 2 ø4x16 mm ø4x25 mm QA x 1 QC x 1 Panel ixator Q S x 2 9,5 ø4x25 mm S x 4 Handle ø26mm kr 17 Cabinet Hinge Guide Hinge Hanging Rail Holder 13x150 mm Strap ø4x14 mm Washer Pin PARTS x2 Page 2 of 8

3 STEP ONE 1. Insert 12 x cambolts () into side panels 1 & Insert 12 x cam locks ( C) into side panels 1 & Insert 2 x holders () into side panels 1 & 2 using 2 x screws (EA) and tighten with a screwdriver. EA C 4. Insert 6 x guide hinges () into side panels 1 & 2. C C C C C C C C C C C C STEP TWO 1. Insert 6 x cam locks ( C) into rails 5 & 6 & Insert 6 x wooden dowels () into side rails 5 & 6 & 7 3. Insert 4 x cambolts () into side rail Insert 10 x cam locks ( C) into partition 15. C C C C C C C C C C C C C C STEP TEE 1. Attach rail 7 on to partition 15 and tighten the camlocks (C) to lock cambolts (). C a) b) Ensure the arrow indicators are pointing towards the panel edges when inserting before tightening with a screwdriver. c) Page 3 of 8

4 STEP OUR 1. Insert 6 x cambolts () into bottom panel Attach side panel 1 to bottom panel 4 and tighten the camlocks (C ) to lock cambolts (). 3. Attach rails 5 & 6 and partition 15 to side panel 1 and tighten the camlocks (C) to lock cambolts (). 4. Attach rails 5 & 6 and partition 15 to side panel 2 and tighten the camlocks (C) to lock cambolts (). 5. Attach side panel 2 to bottom panel and tighten the camlocks (C) to lock cambolts (). C a) Ensure the arrow indicators are pointing towards the panel edges when inserting before tightening with a screwdriver. b) c) STEP IVE 1. Place back panel 8 into the grooves in the back of the side panels 1 & 2. Page 4 of 8

5 STEP SIX 1. Insert 6 x cambolts () into top panel 3. STEP SEVEN 1. Attach top panel 3 to the assembled unit and tighten the camlocks (C ) to lock cambolts (). C a) b) c) Ensure the arrow indicators are pointing towards the panel edges when inserting before tightening with a screwdriver. STEP EIGHT 1. Secure back panel 8 using 18 x panel fixators ( ) as shown on the picture. a) b) c) Page 5 of 8

6 STEP NINE 1. Insert 4 x camlocks (CA) into drawer side panels 10 & Insert camlock (C) into supporting bottom drawer bar Insert wood dowel () into supporting bottom drawer bar 9. C CA CA C CA STEP TEN 1. Insert 5 x cambolts () into drawer front panel 14. STEP ELEVEN 1. Attach drawer side panels 10 & 11 to drawer front 14 and tighten the camlocks (CA) to lock cambolts (). 2. Attach supporting bottom drawer bar 9 to drawer front 14 and tighten the camlocks (C ) to lock cambolt (). 3. Slide drawer bottom panel 12 into the grooves in the drawer side panel 10 & Attach drawer back panel 13 to drawer side panels 10 & 11 and to supporting bottom drawer bar 9 using 6 x screws (E C) and tighten with a screwdriver. EC EC EC Ensure the arrow indicators are pointing towards the panel edges when inserting before tightening with a screwdriver. STEP TWELVE 1. Secure drawer botton panel 12 using 4 x panel fixators ( ) as shown on the picture. a) b) c) Page 6 of 8

7 STEP THIRTEEN 1. Insert drawer into the assembled unit. 2. Attach 2 x handles ( H) to drawer front panel using 2 x screws ( G) and tighten with a screwdriver. G H STEP OURTEEN 1. Attach 6 x hinges (H ) to the doors 16(x2) using 12 x screws (E) and tighten with a screwdriver. H E E H H H Page 7 of 8

8 STEP ITEEN 1. Attach the doors 16(x2) to side panels 1 & 2. Insert cabinet hinge (HA) to guide hinge (H) and tighten with a screwdriver. 2. Adjust the hinges a) side to side b) front to back c) up & down S 3. Insert hanging rail 17 into the assembled unit. 4. Insert 4 x pins ( S) to rails 5 & 6. S S STEP SIXTEEN 1. Attach 2 x handles ( H) to door fusing 2 x screws ( G) and tighten with a screwdriver. G QC Q Q QA H 2. Attach wall strap (QA) to the assembled unit using 2 x washer s (Q) and 1 x screw (QC). QC QA Q Q WARNING: Always ensure the area to be drilled is free from hidden electrical wires, water and gas pipes. NOTE: Wall fixings are not included, please source suitable fixings for your wall type. If in doubt please consult a qualified trades person. Page 8 of 8