DOREL ASIA DESK, HUTCH & CHAIR. Lot number: Date of purchase: / /

Size: px

Start display at page:

Download "DOREL ASIA DESK, HUTCH & CHAIR. Lot number: Date of purchase: / /"

Posy Stone
5 years ago
Views:

1 DOREL ASIA DESK, HUTCH & CHAIR Model No. : WMP-DC (White) WMP-DC (White) WMEP-DC (Espresso) WMEP-DC (Espresso) UPC CODE: (White) (White) (Espresso) (Espresso) NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) Date of purchase: / / DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. Tel # : das@dorel.com Fax #:

2 CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 5 Albert-Hudon Boulevard, Suite 00 Montreal, Quebec Canada HG L das@dorel.com WARNING * Ensure all parts and components are present before beginning assembly. * Keep instructions for future use. * Assemble on soft, smooth surface to prevent damage to product finish. * Do not use the Desk, Hutch and Chair if it is damaged or broken. * Phillips head screwdriver is not included. * DO NOT use power tools. * CAUTION: Adult assembly required. * Assembly will require two people. * Estimated assembly time: 5 minutes. * The back panel serves as an integral component in maintaining stability for this product. DO NOT remove the back panel to accommodate any item that you wish to place that does not rest evenly on the shelves. CARE AND CLEANING Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture. MAINTENANCE Check bolts/screws periodically and tighten them if necessary. DOREL ASIA LIMITED WARRANTY Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. WARNING: Should this product become damaged, and/or components are broken or missing, DO NOT USE.

3 WMP-DC / WMP-DC WMEP-DC / WMEP-DC Pre-assembled on Left Drawer Front (ZB) 8 DRAWER HINGE PCS FLAT HEAD SCREW 6PCS --

4 PARTS LIST DESK, HUTCH & CHAIR WMP-DC / WMP-DC WMEP-DC / WMEP-DC A B C DD E E HUTCH TOP PC F LEFT SIDE PANEL PC MIDDLE CLAPBOARD RIGHT SIDE PANEL PC PC G G H I LEFT BACK FRAME FRONT RAIL PC PC ADJUSTABLE SHELF BACK PANEL PCS PC I J K L M DESK TOP LEFT SIDE PANEL PC PC N MIDDLE CLAPBOARD RIGHT SIDE PANEL PC PC NN O P BACK PANEL LEFT RAIL PC PCS Q R LEFT UPPER RAIL RIGHT UPPER RAIL PC PC S RIGHT MIDDLE RAIL RIGHT LOWER RAIL PC PC DOOR RIGHT BACK PANEL PC PC --

5 PARTS LIST T T DESK, HUTCH & CHAIR WMP-DC / WMP-DC WMEP-DC / WMEP-DC U U V W X BOTTOM PANEL PC ADJUSTABLE SHELF PC Y Z DRAWER FRONT LEFT DRAWER SIDE PC PC ZA RIGHT DRAWER SIDE DRAWER BOTTOM PC PC ZB AA AB DRAWER BACK LEFT DRAWER PC PC AC LEFT DRAWER FRONT BACK FRAME PC PC AD AE AF SEAT FRAME LEFT LEG PC PC AG RIGHT LEG DOWEL PC PCS LEG 6 PCS CONNECT BLOCK PCS --

6 WMP-DC / WMP-DC WMEP-DC / WMEP-DC NOTE: A Phillips head screwdriver (not included) is needed to tighten all screws. STEP Insert cam bolts () and wood dowels () into left side panel (B) and middle clapboard (C). Insert cam locks () to left back frame (E). Attach left side panel (B) & middle clapboard (C) to left back frame (E) by rotating cam locks () /-turn clockwise. B C E align cam lock cu tou t w ith cam bolt --

7 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Insert cam bolt () and wood dowel () into to left side panel (B). Insert cam lock () to front rail (F). Attach front rail (F) to left side panel (B) by rotating cam lock () /-turn clockwise. B C F align cam lock cu tou t w ith cam bolt -5-

8 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Insert cam bolt () and wood dowel () into right side panel (D). Insert cam lock () into front rail (F). Attach right side panel (D) to front rail (F) by rotating cam lock () /-turn clockwise. F D B C -6-

9 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Insert cam bolts () and wood dowels () into hutch top (A). Insert cam locks () to left side panel (B), right side panel (D) and middle clapboard (C). Attach hutch top (A) to the unit by rotating cam locks () /-turn clockwise. Secure hutch top (A) to front rail (F) using flat head screws (6). A F D B C --

10 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 5 Attach back panel (H) to the unit with round head screws (). Insert shelf supports (9) to middle clapboard (C) and right side panel (D). Place adjustable shelves (G) onto shelf supports (9). The Hutch is now fully assembled. A D H NOTE: Proper attachment of the back panel is essential in stabilizing the unit. All screws must be installed. Do not remove or cut out the back panel for any reason. A D 9 B C G G

11 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 6 Attach left drawer side (W) and right drawer side (X) to drawer front (V) with flat head screws (6). Slide drawer bottom (Y) into the grooves on left drawer side (W), right drawer side (X) and drawer front (V). 6 6 V 6 6 V X Y -9-

12 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Attach drawer back (Z) to drawer sides (W) & (X) with flat head screws (6). Ensure the drawer bottom (Y) fits into the grooves on the drawer back (Z) before tightening flat head screws (6). Attach drawer hinges () to left drawer (ZA) & left drawer front (ZB) with flat head screws (8). Attach knobs (5) to drawer front (V) & left drawer (ZB) with flat head screws (6) W Z Y 6 X V

13 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 8 Attach legs (AF) to left side panel (J), right side panel (L) and middle clapboard (K) by rotating clockwise. L AF AF AF AF --

14 STEP 9 DESK, HUTCH & CHAIR WMP-DC / WMP-DC WMEP-DC / WMEP-DC Insert cam bolts () and wood dowels () into middle clapboard (K). Insert cam locks () into left rails (N). Attach left rails (N) to middle clapboard (K) by rotating cam locks () /-turn clockwise. N N K --

15 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 0 Insert cam bolts () and wood dowels () into left side panel (J). Insert cam locks () into left rails (N). Attach left side panel (J) to left rails (N) by rotating cam locks () /-turn clockwise. J --

16 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Insert cam bolt () & wood dowel () into left side panel (J). Insert cam lock () into back panel (M). Attach back panel (M) to left side panel (J) by rotating cam locks () /-turn clockwise. K M J Fasten back panel (M) with flat head screw (6) K 6 --

17 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Place the unit backside down on a soft, smooth surface. Insert cam bolts () and wood dowels () into middle clapboard (K). Insert cam locks () into right middle rail (P), right lower rail (Q) and bottom panel (T). Attach the rails (P) & (Q) and bottom panel (T) to middle clapboard (K) by rotating cam locks () /-turn clockwise. P Q K T -5-

18 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Insert cam bolts () & wood dowels () into right side panel (L). Insert cam locks () into rails (P) & (Q) and bottom panel (T). Attach right side panel (L) to the unit by rotating cam locks () /-turn clockwise. P T -6-

19 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP Attach right upper rail (O) and left upper rail (NN) to desk top (I) with wood dowels () and flat head screws (6) Insert cam bolts () into desk top (I). Insert cam locks () into left side panel (J), middle clapboard (K) and right side panel (L). Attach desk top (I) to the unit by rotating cam locks /-turn clockwise. I I K L J -- 0

20 STEP 5 DESK, HUTCH & CHAIR WMP-DC / WMP-DC WMEP-DC / WMEP-DC Attach right back panel (S) to the unit with round head screws (). Insert shelf supports (9) into middle clapboard (K) & right side panel (L). Place adjustable shelf (U) onto shelf supports (9). I NOTE: Proper attachment of the back panel is essential in stabilizing the unit. All screws must be installed. J L S 9 L K 9-8-

21 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 6 Attach magnet (8) to middle clapboard (K) with round head screws (). Install door (R) by pressing the door plastic pins down, and inserting them into the holes of right middle rail (P) & right lower rail (Q) as shown. Attach knob (5) to door ( R ) with flat head screw (6). 8 I J Q I Insert the drawers into the unit. The Desk is now fully assembled. J 0 ZA 5-9-

22 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP With the help of another person, gently place the Hutch onto desk top (I). Fix connect blocks (AG) to the back of hutch and desk with flat head screws (6). A AG I -0-

23 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 8 Insert wood dowel () into back frame (AA) and connect it to seat frame (AB). Secure back frame (AA) to seat frame (AB) with washers (), spring washers (5) and bolts (0) & bolts (). Refer to the below illustration for the correct location of bolts (0 & ). Tighten bolts (0 & ) using Allen key (). 0 AA

24 WMP-DC / WMP-DC WMEP-DC / WMEP-DC STEP 9 Place dowels (AE) into the back frame (AA). Attach legs (AC) & (AD) to seat frame (AB) with washers (), spring washers (5) and bolts (). Tighten bolts () using Allen key. Secure dowels (AE) to legs (AC & AD) and back frame (AA) with flat head screws(6). NOTE: Ensure holes in legs are facing the floor before installing screws (6) so they are not visible when chair is on its legs. The Chair is now fully assembled

25 WMP-DC / WMP-DC WMEP-DC / WMEP-DC CAUTION: "This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury." Do not place anything on top shelf. Maximum Weight per Adjustable Shelf- 5 lbs Desk Top Maximum Weight 0 lbs Maximum Weight Adjustable Shelf 5 lbs Cabinet Bottom Panel Maximum Weight - 0 lbs Maximum Weight per Drawer 5 lbs Congratulations! You've finished assembling your Desk, Hutch and Chair. DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. Tel # : das@dorel.com Fax #:

26 MODEL #:WMP-DC / WMP-DC / WMEP-DC / WMEP-DC Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number Customer Service Fax Number das@dorel.com Request Date: Name: Shipping Address: Street & Number: City & State: Zip Code: Day Time Phone Number: (including area code) Date & Place of Purchase: Part(s) description and quantity: (Please be sure to list model number or SKN number) Customer Service Representative Mailing Address: Customer Service Department No., 5 Albert-Hudon Boulevard, Suite 00, Montreal, QC, Canada, HG L

DOREL ASIA COUNTER HEIGHT DESK NEED HELP! Model No: WM3514 UPC CODE:

DOREL ASIA COUNTER HEIGHT DESK Model No: UPC CODE: 0-65857-15762-8 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM