CHANGES IN HEADINGS PRODCOM PRODCOM 2017
|
|
- Andra Blake
- 5 years ago
- Views:
Transcription
1 CHANGES IN HEADINGS PRODCOM - PRODCOM DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Z Z2 Non-alcoholic beverages, not containing milk, milk products and fats derived therefrom (excl. water, fruit or vegetable juices) Fish, crustaceans, molluscs, other aquatic invertebrates and seaweed, otherwise prepared or preserved, including prepared meals and dishes 2202[.90( )] Code deleted 0306[.11(.05) +.12(.05) +.14(.05) +.15(.10) +.16(.10) +.17(.10) +.19(.05) +.21(.10) +.22(.30) +.24(.10) +.25(.10) +.26(.10) +.27(.10) +.29(.05)] [.19(.10) +.29(.05) +.39(.05) +.49(.05) +.59(.05) +.60(.10) +.79(.10) +.89(.10) +.99(.10)] [.19(.10) +.29(.10) +.30(.30) +.90(.30)] [ ( ) +.13( ) +.14( ) +.15( ) ( ) +.20( [ ( ) ( ) ( ) ] Code deleted and part of the content moved to Z4 New Z code with the s , , , and Z Z4 Crustaceans, molluscs and other aquatic invertebrates and seaweed, frozen, dried, salted, in brine or otherwise prepared or preserved; Fish, otherwise prepared or preserved; Prepared meals and dishes based on fish, crustaceans and molluscs Crustaceans, molluscs and other aquatic invertebrates and seaweed, frozen, dried, salted, in brine or otherwise prepared or preserved; Fish, otherwise prepared or preserved; Prepared meals and dishes based on fish, crustaceans and molluscs 0306[.11( ) +.12( ) +.14( ) ( ) +.17( ) +.19( ) ( ) +.93( ) ( ) +.99( [ ( ) ( ) +.39( ) +.43( ) +.49( ) ( ) ] [ ( ) +.90( [ ( ) +.13( ) +.14( ) +.15( ) ( ) +.20( [ ( ) ( ) ( ) ] 0306[.11( ) +.12( ) +.14( ) ( ) +.17( ) +.19( ) ( ) +.93( ) ( ) +.99( [ ( ) ( ) +.39( ) +.43( ) +.49( ) ( ) ] [ ( ) +.90( [ ( ) +.13( ) +.14( ) +.15( ) ( ) +.20( [ ( ) ( ) ( ) ] Z3 Fresh or chilled or frozen poultry offal (excluding fresh or chilled fatty livers of geese and ducks) 0207[.13( ) +.14( ) +.26( ) +.27( ) +.44( ) +.45( ) +.54( ) +.55( ) +.60( )] Fresh or chilled fatty livers of geese and ducks 0207[ ] Frozen poultry livers 0207[.14(.91) +.27(.91) +.45( ) +.55( ) +.60(.91a)] Fresh or chilled poultry offal (excluding fatty 0207[.13( ) +.26( ) +.44( ) livers of geese and ducks) +.54( ) +.60(.91b +.99a)] Frozen poultry offal (excluding liver) 0207[.14(.99) +.27(.99) +.45(.99) +.55(.99) +.60(.99b)] Μαλακά τυριά (τύπου Φιλαδέλφεια) moved to Edible offal of poultry 0207[.13( ) +.14( ) +.26( ) +.27( ) ( ) +.45( ) ( ) +.55( ) +.60( )] (2)
2 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) New code Katiki Domokou, Galotyri and other types of cream cheese (2) European type cheese Description change Semi-hard cheese and european type cheese (2) New code Graviera cheese (2) New code Metsovone, Formaella and similar types of cheese (2) New code Mizithra cheese (non fresh) (2) New code Other types of white cheese (excluding cream cheese) (2) New code Cheese substitute (2) New code Krokos Kozanis (2) New Z code with the s and content from , , and Z Wine and grape must with fermentation prevented or arrested by the addition of alcohol, with a protected designation of origin (PDO) produced of an alcoholic strength of <= 15 % (excluding sparkling wine) Spruce wood (Picea abies Karst.), fir wood (Abies alba Mill.) sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm 2204[.21( ) +.22( ) +.29( )] 4407[.12( Spruce wood (Picea abies Karst.), fir wood (Abies alba Mill.) sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm, end-jointed, sanded or planed moved to Spruce wood (Picea abies Karst.), fir wood (Abies alba Mill.) sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm 4407[.12( Coniferous wood; sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm, endjointed, sanded or planed content from , , and Pine wood (Pinus sylvestris L.) sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm 4407[.11( Pine wood (Pinus sylvestris L.) sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm, end-jointed, sanded or planed moved to Pine wood (Pinus sylvestris L.) sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm 4407[.11( content from , , and Coniferous wood sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. spruce "Picea abies Karst.", silver fir "Abies alba Mill." and pine "Pinus sylvestris L.") 4407[.19( Coniferous wood; sawn or chipped lengthwise, sliced or peeled, of a thickness > 6 mm, endjointed, sanded or planed 4407[.10( )] moved to Coniferous wood sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. spruce "Picea abies Karst.", silver fir "Abies alba Mill." and pine "Pinus sylvestris L.") 4407[.19( Coniferous wood sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. planed or sanded, and spruce "Picea abies Karst.", silver fir "Abies alba Mill." and pine "Pinus sylvestris L.") moved to Coniferous wood sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. spruce "Picea abies Karst.", silver fir "Abies alba Mill." and pine "Pinus sylvestris L.") 4407[.19( Other plywood, veneered panels and similar laminated wood, of coniferous wood 4412[.94(.90) +.99( )]
3 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Plywood consisting solely of sheets of wood (excluding of bamboo), each ply not exceeding 6 mm thickness (excluding products with at least one outer ply of tropical wood or non-coniferous wood) Other plywood, veneered panels and similar laminated wood, of coniferous wood 4412[ (.90) +.99( )] Other plywood, veneered panels and similar laminated wood, of other wood 4412[.94(.10) +.99( )] Plywood consisting solely of sheets of wood (excluding of bamboo), each ply not exceeding [.32(.10 + mm thickness, with at least one outer ply of nonconiferous wood (excluding tropical wood) Other plywood, veneered panels and similar laminated wood, of other wood 4412[ (.10) +.99( )] New Z code with the s and Z0 Phosphides (excluding ferrophosphorus), whether or not chemically defined; hydrides, nitrides, azides, silicides and borides, whether or not chemically defined, other than compounds which are also carbides of heading ; 2850[.00( [ ( Other inorganic compounds n.e.c.; amalgams (excluding distilled and conductivity water and water of similar purity, liquid air and compressed air, those of precious metals) Triethanolamine and its salts 2922[.13( Amino-alcohols, their ethers and esters with only 1 oxygen function and their salts (excluding 2922[ ( )] monoethanolamine and its salts, diethanolamine and its salts, triethanolamine and its salts) Amino-alcohols, their ethers and esters with only 1 oxygen function and their salts (excluding 2922[ ] monoethanolamine and its salts, diethanolamine and its salts) Insecticides based on chlorinated hydrocarbons, put up in forms or packings for retail sale or as preparations or articles (excluding hazardous pesticides) Insecticides based on carbamates, put up in forms or packings for retail sale or as preparations or articles (excluding hazardous pesticides) Insecticides based on organophosphorus products, put up in forms or packings for retail sale or as preparations or articles (excluding hazardous pesticides) Insecticides based on pyrethroids, put up in forms or packings for retail sale or as preparations or articles (excluding hazardous pesticides) Other insecticides (excluding hazardous pesticides) Artificial filament tow and staple fibres (not carded, combed or otherwise processed for spinning), of viscose rayon Other artificial filament tow and staple fibres (not carded, combed or otherwise processed for spinning) Unglazed ceramic mosaic tiles, cubes and similar articles, with a surface area < 49 cm² Glazed ceramic mosaic tiles, cubes and similar articles, with a surface area < 49 cm² Insecticides Artificial filament tow and staple fibres (not carded, combed or otherwise processed for spinning, excluding the ones of acetate) 3808[ ( [ ]
4 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Unglazed ceramic and stoneware flags and paving, hearth or wall tiles; unglazed ceramic and stoneware mosaic cubes and the like, whether or not on a backing Glazed ceramic double tiles of the spaltplatten type Glazed stoneware flags and paving, hearth or wall tiles, with a face of > 90 cm² Glazed earthenware or fine pottery ceramic flags and paving, hearth or wall tiles, with a face of > 90 cm² 6907[.90( )] 6908[.90( )] Ceramic tiles and flags 6907[ ] Glazed ceramic flags and paving, hearth or wall tiles excluding double tiles of the spaltplatten type, stoneware, earthenware or fine pottery flags, paving or tiles with a face of not > 90 cm² 6908[.90( )] Screws and bolts without heads in steel 7318[.15( )] Screws, turned from bars, rods, profiles, or wire, of a shank thickness 6 mm Slotted and cross-recessed screws of stainless steel Other screws and bolts with heads Hexagon socket head screws of stainless steel Code deleted and part of the content moved to , , , , , , , and moved to and moved to and moved to and moved to and Calcined kaolin b Screws and bolts without heads in steel 7318[.15( )] Slotted and cross-recessed screws of stainless steel Other screws and bolts with heads Hexagon socket head screws of stainless steel Other hexagon socket head screws Stainless steel hexagon bolts with heads tensile strength < 800 MPa (excluding of tensile strength >= 800 MPa (excluding of Iron or steel bolts with heads (excluding hexagon bolts) Screws and bolts without heads in steel 7318[.15( )] Screws and bolts without heads in steel 7318[.15( )] Slotted and cross-recessed screws of stainless steel Slotted and cross-recessed screws of stainless steel Other screws and bolts with heads Other screws and bolts with heads Hexagon socket head screws of stainless steel Hexagon socket head screws of stainless steel
5 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Other hexagon socket head screws Stainless steel hexagon bolts with heads tensile strength < 800 MPa (excluding of tensile strength 800 MPa (excluding of Iron or steel bolts with heads (excluding hexagon bolts) Stainless steel nuts (excluding those turned from bars, rods, profiles, or wire, of solid section, of a hole diameter 6 mm) Iron or steel nuts (including self-locking nuts) (excluding of stainless steel, turned from bars, rods, profiles, or wire, of solid section, of a hole diameter 6 mm) [.16( )] moved to and moved to and moved to and moved to and moved to and moved to and moved to and Other hexagon socket head screws Other hexagon socket head screws Stainless steel hexagon bolts with heads Stainless steel hexagon bolts with heads tensile strength < 800 MPa (excluding of tensile strength < 800 MPa (excluding of tensile strength >= 800 MPa (excluding of tensile strength >= 800 MPa (excluding of Iron or steel bolts with heads (excluding hexagon bolts) Iron or steel bolts with heads (excluding hexagon bolts) Stainless steel nuts 7318[.16( )] Stainless steel nuts 7318[.16( )] Iron or steel nuts (including self-locking nuts) 7318[.16( )] Iron or steel nuts (including self-locking nuts) 7318[.16( )] from codes and Z0 Parts of telephone sets, telephones for cellular networks or for other wireless networks and of other apparatus for the transmission or reception of voice, images or other data, n.e.s Iron or steel nuts turned from bars, rods, profiles, or wire, of solid section, of a hole diameter 6 mm Radio broadcast receivers, only mains-operated (excl. these of a kind used in motor vehicles) [.91( ) +.92( ) +.99] Code deleted and part of the content moved to and moved to Stainless steel nuts 7318[.16( )] Iron or steel nuts (including self-locking nuts) 7318[.16( )] Radio broadcast receivers (except for cars), capable of operating without an external source of power 8527[.12( ) +.13( ) ( ) +.92( ) +.99]
6 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Video projectors 8528[.69( )] Colour video monitors with cathode-ray tube Flat panel video monitor, LCD or plasma, etc., without tuner (colour video monitors) (excluding with cathode-ray tube) 8528[.59( )] Monitors and projectors, not incorporating television reception apparatus and not principally used in an automatic data processing system 8528[ ( ) ( )] Black and white or other monochrome video monitors 8528[.49(.10) +.59(.20)] from codes and Z0 Cathode-ray oscilloscopes and cathode-ray oscillographs; Instruments and apparatus for measuring or checking electrical quantities n.e.c. 9030[ ( Electronic instruments and apparatus for meteorological, hydrological and geophysical purposes (excluding compasses) Electronic theodolites and tachymetres (tachometers); surveying (including photogrammatrical surveying), hydrographic and oceanographic instruments and appliances(excluding rangefinders, levels and compasses), electronic. Non electronic surveying (including photogrammatrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances (excluding rangefinders, levels and compasses), [.20(.10) +.40(.10) +.80(.19)] 9015[.20(.90) +.40(.90) +.80( )] Theodolites and tachymetres (tachometers); other surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances 9015[.20( ) +.40( ) +.80( )] s , and Theodolites and tachymetres (tachometers); other surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances 9015[.20( ) +.40( ) +.80( )] Multimeters without recording device Electronic instruments and apparatus for measuring or checking voltage, current, resistance or electrical power, without recording device (excluding multimeters, and oscilloscopes and oscillographs) Voltmeters without recording device Non-electronic instruments and apparatus, for measuring or checking voltage, current, resistance or power, without a recording device (excluding multimeters, voltmeters) checking semiconductor wafers or devices Instruments and apparatus, with a recording device, for measuring or checking electric gains (excluding gas, liquid or electricity supply or production meters) Electronic instruments and apparatus, without a recording device, for measuring or checking electric gains (excluding gas, liquid or electricity supply or production meters) New code with content from , , and moved to 9030[.20(.30) ] Code split 9030[.20(.91) +.89(.30)] Code split Instruments for measuring electrical quantities without a recording device checking electrical quantities n.e.c. checking electrical quantities n.e.c. Instruments for measuring electrical quantities without a recording device checking electrical quantities n.e.c. Instruments for measuring electrical quantities without a recording device checking electrical quantities n.e.c. 9030[ ( )] 9030[.20(.00b) ( [.20(.00b) ( [ ( )] 9030[.20(.00b) ( [ ( )] 9030[.20(.00b) (.30 +
7 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Non-electronic instruments and apparatus, without a recording device, for measuring or checking electrical gains (excluding multimeters, voltmeters) Electronic machines and appliances for testing the mechanical properties of metals (excluding metallographic machines or appliances, instruments for detecting defects) Non-electronic machines and appliances for testing mechanical properties of metals Electronic machines and appliances for testing the mechanical properties of materials (excluding for metals) Non-electronic machines and appliances for testing the mechanical properties of materials (excluding for metals, including for textiles, paper, paperboard, plastics, wood, concrete, rubber, leather/linoleum) Electronic instruments, appliances and machines for measuring or checking geometrical quantities (including comparators, coordinate measuring machines (CMMs)) Other electronic instruments, appliances,... for measuring or checking Other instruments, appliances,... for measuring or checking geometrical quantities Non-electronic measuring machines and instruments (excluding test benches, optical instruments and appliances as well as machines and instruments for balancing mechanical parts or for measuring or checking geometrical quantities) 9030[.20(.99) +.89( Code split [.10( )] [.80( )] [.80( )] content from , , and from codes and from codes and from codes and Z Z Z4 Instruments for measuring electrical quantities without a recording device checking electrical quantities n.e.c. Machines and appliances for testing the mechanical properties of materials Measuring or checking instruments, appliances and machines n.e.c. Measuring or checking instruments, appliances and machines n.e.c. Instant print cameras and other cameras (excluding digital cameras) Parts and accessories of instruments, appliances and machines of HS 9031 Radio-telephony or radio-telegraphy reception apparatus (excluding those combined with radio receivers) 9030[ ( )] 9030[.20(.00b) ( [.10( ) +.80( [.80( )] 9031[.80( )] 9006[ ( ) +.59] New code to follow the CN implementation Machinery and apparatus for filtering and purifying gases with stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cm (excluding intake filters for internal combustion engines) New code Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines
8 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Automatic catchweighing machines and checkweighers, of a maximum weighing capacity kg Weigh/price labelling machines, weighbridges and other weighing machinery (excluding shopscales, personal and household scales, scales for continuous weighing of goods on conveyors, constant weight scales and balances of a sensitivity 5 cg) Non-automatic retail weighing machines, maximum weighing capacity 30 kg New agricultural and forestry tractors, wheeled, of an engine power 37 kw New agricultural and forestry tractors, wheeled, of an engine power > 37 kw but 59 kw (excluding pedestrian-controlled tractors) New agricultural and forestry tractors, wheeled, of an engine power > 59 kw but 75 kw (excluding pedestrian-controlled tractors) New agricultural and forestry tractors, wheeled, of an engine power > 75 kw but 90 kw (excluding pedestrian-controlled tractors) New agricultural and forestry tractors, wheeled, of an engine power > 90 kw (excluding pedestrian-controlled tractors) New tractors excluding agricultural/forestry tractors, wheeled, pedestrian-controlled tractors - road tractors for semi-trailers, track-laying tractors - tractors used on railway platforms 8423[.81(.10) +.82(.10)] [.81( ) +.82(.90) +.89] [.90( )] New code with the content from , , , , and Other weighing machinery Tractors of an engine power <= 37 kw, excluding pedestrian-controlled tractors, road tractors for moved to semi-trailers, track-laying tractors Tractors of an engine power <= 37 kw, excluding content from pedestrian-controlled tractors, road tractors for semi-trailers, track-laying tractors moved to content from content from , , and Other weighing machinery Tractors of an engine power > 37 kw but <= 59 kw, excluding pedestrian-controlled tractors, road tractors for semi-trailers, track-laying tractors Tractors of an engine power > 37 kw but <= 59 kw, excluding pedestrian-controlled tractors, road tractors for semi-trailers, track-laying tractors Tractors of an engine power > 59 kw, excluding pedestrian-controlled tractors, road tractors for semi-trailers, track-laying tractors Machine tools for deburring, sharpening, grinding or otherwise finishing metal 8423[.81( ) +.82( ) +.89( )] 8423[.81( ) +.82( ) +.89( )] 8701[.91( ) +.92( [.91( ) +.92( [.93(.10a +.90a)] 8701[.93(.10a +.90a)] 8701[.93(.10b +.90b) +.94( ) +.95( [ ( ) ( ) +.90] Central driven precision spacing seeders for agricultural or horticultural use seeders) Seeders for agricultural or horticultural use (excluding central driven precision spacing Seeders, planters and transplanters 8432[ ( Planters and transplanters Tractors of an engine power > 37 kw, excluding from PRODCOM codes 8701[.93( ) +.94( ) +.95( Z0 pedestrian-controlled tractors, road tractors for and semi-trailers, track-laying tractors
9 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Machine tools for working any material by removal of material, operated by ultrasonic processes, for the manufacture of semiconductor devices or of electronic integrated circuits Renumbering Numerically controlled flat-surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm Numerically controlled cylindrical surface grinding machines for working metal, in which 8460[.21( )] the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm Other numerically controlled grinding machines in which the positioning in any axis can be set up to minimum accuracy of 0.01mm Non-numerically controlled flat-surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm Non-numerically controlled cylindrical surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm Non-numerically controlled grinding machines for working metal, in which any axis can be set to a minimum accuracy of 0.01mm excluding flatsurface grinding machines, cylindrical surface grinding machines Numerically controlled sharpening (tool or cutter grinding) machines for working metal Non-numerically controlled sharpening (tool or cutter grinding) machines for working metal Honing or lapping machines for working metal 8460[.40( Machines for deburring or polishing metal (excluding gear finishing machines) 8460[.90( Multi-purpose machines where the workpiece is manually transferred between operations, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Band saws for working wood, cork, bone and hard rubber, hard plastics or similar hard materials New PRODCOM code with the part of content from , , , , , , , , and Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits Machine tools for deburring, sharpening, grinding or otherwise finishing metal Machining centres [ ( ) ( ) +.90] Circular saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Sawing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excluding band saws, circular saws)
10 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Planing, milling or moulding (by cutting) machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Grinding, sanding or polishing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Bending or assembling machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Drilling or morticing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Splitting, slicing or paring machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials Machine tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, n.e.c Machine tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, n.e.c 8465[.10(.10) +.91( ) ] Parts and accessories for machine-tools operated by ultrasonic processes Tool holders, self-opening dieheads and workholders of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays Parts and accessories of machines and apparatus used solely or principally for (a) the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays, (b) the manufacture or repair of masks and reticles, (c) assembling semiconductor devices or electronic integrated circuits, and (d) lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays New code to follow the CN for hybrid and electric vehicles New code to follow the CN for hybrid and electric vehicles Motor vehicles, with both spark-ignition or compression-ignition internal combustion reciprocating piston engine and electric motor as 8703[.40(.10) +.50] motors for propulsion, other than those capable of being charged by plugging to external source of electric power Motor vehicles, with both spark-ignition or compression-ignition internal combustion reciprocating piston engine and electric motor as 8703[.60(.10) +.70] motors for propulsion, capable of being charged by plugging to external source of electric power Other motor vehicles for the transport of persons (excluding vehicles for transporting 10 persons, snowmobiles, golf cars and similar vehicles) 8703[.90(.10 + New code to follow the CN for hybrid and electric vehicles moved to New code to follow the CN for hybrid and electric vehicles Motor vehicles, with only electric motor for propulsion Other motor vehicles for the transport of persons (excluding vehicles with only electric motor for propulsion, vehicles for transporting >= 10 persons, snowmobiles, golf cars and similar vehicles) Other motor vehicles for the transport of persons (excluding vehicles with only electric motor for propulsion, vehicles for transporting >= 10 persons, snowmobiles, golf cars and similar vehicles)
11 DESCRIPTION HS/CN (1) DESCRIPTION HS/CN (1) Toy musical instruments and apparatus; toys put up in sets or outfits (excluding electric trains, scale model assembly kits, construction sets and constructional toys, and puzzles); toys and models incorporating a motor; toy weapons Other toys of plastics Toy die-cast miniature models of metal Other toys n.e.c [.00( )] Games and toys n.e.c. 9503[.00( )] from codes and Z7 Kaolin (1) HS:Harmonized Commodity Description and Coding System CN: Combined Nomeclature (2) Codes, additional to PRODCOM list, for monitoring products of national interest
PORTUGAL PAKISTAN TRADE
PORTUGAL PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 EU is Pakistan s largest export market representing 34% of exports. PAKISTAN'S EXPORTS TO EU, 2016 Portugal accounted for 2.3% of total
More information10 Mining of Coal and Lignite; extraction of Peat
A 01-02 Agriculture, hunting and forestry B 05 Fishing C 10-14 Mining and quarrying 10 Mining of Coal and Lignite; extraction of Peat 101 Mining and agglomeration of hard coal 102 Mining and agglomeration
More informationANNEXB. 6-digit HS Code. No. Description
ANNEXB 1 080211 Almonds fresh or dried in shell 2 130110 Lac 3 130120 Gum Arabic 4 130190 Others 5 140110 Bamboos 6 140120 Rattans 7 140190 Other 8 170490 Other Limestone flux; limestone and other calcareous
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationITC (HS), 2012 SCHEDULE 1 IMPORT POLICY SECTION XVI
SECTION XVI MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS; AND PARTS AND ACCESSORIES OF
More informationCYPRUS PAKISTAN TRADE
CYPRUS PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 EU is Pakistan s largest export market representing 34% of exports. PAKISTAN'S EXPORTS TO EU, 2016 Cyprus accounted for 0.07% of total EU
More informationCountry Profile China
Country Profile China Introduction Location Capital Eastern Asia, bordering the East China Sea, Korea Bay, Yellow Sea, and South China Sea, between North Korea and Vietnam Beijing Area 9,596,960 sq. km
More information2010D0002 EN
2010D0002 EN 07.09.2012 002.001 9 ANNEX Sectors and subsectors which, pursuant to Article 10a(13) of Directive 2003/87/EC, are deemed to be exposed to a significant risk of carbon leakage 1. AT THE NACE-4
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationCRET. NEGOTIATIONS RELATING TO-SCHEDPIjE 7 - CANADA. Article XXVIII:4
CRET "E-L No ^o GENERAL AGREEMENT CM T A m p p p AklrN Tr, APvr. SECEST/106/Md, 13 * TARIFFS AND TRADE 15 June wei NEGOTIATIONS RELATING TO-SCHEDPIjE 7 - CANADA Article XXVIII:4 C The Delegations of Japan
More informationMonthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) July/2013 Issue 01
Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) July/2013 Issue 01 Industrial Production Statistics (IPS) is a regular publication of Bangladesh Bureau of
More information7. Determination origin
The new EU-GSP Rules of Origin Challenges and Opportunities for Thai Exporters Friday 5 th August 2011 Chiang Mai, Thailand 1 Rules of origin GSP in chart products wholly obtained processing beyond minimal
More informationNIC 2008 Group: 3-digit codes along with description
Annexure N: NIC 2008 Group: 3-digit codes along with description NIC-2008 (3-Digit) Group Description 011 Growing of non-perennial crops 012 Growing of perennial crops 013 Plant propagation 014 Animal
More informationNIC 2008 CODES (Sections, Divisions and Groups) Agriculture, forestry and fishing. Crop and animal production, hunting and related service activities
ANNEXURE-2 Section A Division 01 Group 011 Group 012 Group 013 Group 014 Group 015 Group 016 Group 017 Division 02 Group 021 Group 022 Group 023 Group 024 Division 03 Group 031 Group 032 Section B Division
More informationEXPLANATORY NOTES TO THE COMBINED NOMENCLATURE. Example
EXPLANATORY NOTES TO THE COMBINED NOMENCLATURE Example EN C 137/296 Official Journal of the European Union 6.5.2011 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers
More informationCountry Profile Portugal
Country Profile Portugal Introduction Location Southwestern Europe, bordering the North Atlantic Ocean, west of Spain Capital Lisbon Area 92,090 sq. km Population Official Languages Ethnic groups Independence
More informationCh 2: Manufacturing Operations
Ch 2: Manufacturing Operations Learning Objectives: By the end of the lecture the student should be able to: Explain the difference between technological and economical definition of manufacturing. Properly
More informationAnnex A. Conversion Table International Trade Manufacturing Created by the Author
ANNEXES 157 Annex A. Conversion Table International Trade Manufacturing Created by the Author Table A.1. The conversion table International trade Manufacturing used for transposing international trade,
More informationJanuary/2014 Issue 07
Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) January/2014 Issue 07 Bangladesh Bureau of Statistics (BBS) publishes the Industrial Production Statistics
More informationINTRODUCTION TO GRINDING PROCESS
GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding
More informationOctober/2013 Issue 04
Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) October/2013 Issue 04 Industrial Production Statistics (IPS) compilation and publication is a regular task
More informationMonthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) March/2014 Issue 09
Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) March/2014 Issue 09 Bangladesh Bureau of Statistics (BBS) publishes the Industrial Production Statistics
More informationITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 NOTES: TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure of pedicure
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationCorso di Economia Internazionale 1, a.a Fonte: F. di Mauro, Balassa Index
Fonte: F. di Mauro, Balassa La specializzazione produttiva della Cina si concentra sempre di piú verso settori high-tech, i settori low-tech hanno invece un peso decrescente La specializzazione della Euro
More informationManufacturing Processes (continued)
Manufacturing (continued) Machining Some other processes Material compatibilities Process (shape) capabilities Manufacturing costs Correct pg 142, question 34i should read Fig 6.18 question 34j should
More informationAUSTRIA PAKISTAN TRADE
AUSTRIA PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 EU is Pakistan s largest export market representing 34% of exports. Greece, 1% Austria Sweden, 2% 0.2% Denmark, 2% Poland, 3% Portugal, 2%
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationPOLAND PAKISTAN TRADE
POLAND PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2017 Denmark, 2% Sweden, 2% Portugal, 2% Other, Poland, 3% 6% United Kingdom, 22% EU is Pakistan s largest export market representing 34% of exports.
More informationU.S. Census Bureau Metalworking Machinery MQ333W(08)-5 Issued August 2009
U.S. Census Bureau Metalworking Machinery - 2008 MQ333W(08)-5 Issued August 2009 Address inquiries concerning these data to Investment Goods Industries Branch, U.S. Department of Commerce, Census Bureau,
More informationTOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL Notes 1. Apart from blowlamps, portable forges, grinding wheels with frameworks, manicure and pedicure
More informationEnglish GENERAL AGREEMENT ON TARIFFS AND TRADE. Original: FINLAND
GENERAL AGREEMENT ON TARIFFS AND TRADE RESTRICTED L/3743/Add.1 26 September 1972 Limited Distribution Original: English RESTRICTIONS ON IMPORTS FROM POLAND Notifications fromcontracting Parties Addendum
More informationGERMANY PAKISTAN TRADE
GERMANY PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 EU is Pakistan s largest export market representing 34% of exports. Germany accounted for 17% of total EU imports from Pakistan in 2016.
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationNON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM)
NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) A machining process is called non-traditional if its material removal mechanism is basically
More informationNACE Rev. 2. Critical classes database
NACE Rev. 2 Critical classes database 02.10 - Silviculture and other forestry activities Portugal 0210 and 0220 02.10 - Silviculture and other forestry activities 02.20 - Logging Where is "biomass production"
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, Middlesex, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, Middlesex, TW18 3HR, UK Worldwide Quality Assurance provide quality management systems certification Severn House Mandale Business Park Durham DH1 1TH
More informationSPAIN PAKISTAN TRADE 1
SPAIN PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 PAKISTAN'S EXPORTS TO EU, 2016 EU is Pakistan s largest export market representing 34% of exports. Spain accounted for 12% of total EU imports
More informationSole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Delivery Requirements Ground delivery Inside delivery to customer-specified location Unpack and assemble machine, and remove packing
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 192 Portland Road Shieldfield Newcastle upon Tyne NE2 1DJ Contact: Mr David Robinson Tel: +44 (0)190 222 0306 Email: DavidRobinson@ocean-cert.com
More informationBB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
BB07552 5 Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 192 Portland Road Shieldfield Newcastle upon Tyne NE2 1DJ Contact: Mr David Robinson Tel: +44 (0)190 222 0306 Email: DavidRobinson@ocean-cert.com
More informationROUND BENDING MACHINE Model: RBM30
ROUND BENDING MACHINE Model: RBM30 Operation Manual SAVE THIS MANUAL:You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts
More informationPOLAND PAKISTAN TRADE
POLAND PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 PAKISTAN'S EXPORTS TO EU, 2016 EU is Pakistan s largest export market representing 34% of exports. Poland accounted for 3% of total EU imports
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationManufactured goods by degree of manufacturing groups (SITC Rev. 3)
TDRA Manufactured goods by degree of manufacturing TDRB Labour-intensive and resource-intensive manufactures 1 611 Leather 1 612 Manufactures of leather, n.e.s.; saddlery & harness 1 613 Furskins, tanned
More informationA H M 531 The Civil Engineering Center
Title Page Introduction 2 Objectives 2 Theory 2 Fitting 3 Turning 5 Shaping and Grinding 7 Milling 8 Conclusion 11 Reference 11 1 Introduction Machining Machining is a manufacturing process in which a
More informationMembership Application
Membership Application Name of the Company : Key Person Name & Designation : Address : Tel : Fax : Email: Website: Name of the Nominee & Designation : Constitution : Public Ltd. Private Ltd. Proprietary
More informationDust Collector. Model No: DC2200 (FM300S)
Dust Collector Model No: DC2200 (FM300S) GENERAL SAFETY INSTRUCTIONS Before attempting to operate this machine, it is important that you read, understand and follow these instructions very carefully. They
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationCountry Profile Saudi Arabia. Introduction
Country Profile Saudi Arabia Introduction Location Area Middle East, bordering the Persian Gulf and the Red Sea, north of Yemen 2,149,690 sq. km Capital Riyadh Population 28,571,770 (July 2017 est.) Official
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationANNEX 4B: ORIGINATING GOODS REFERRED TO IN ARTICLE 4.3
ANNEX 4B: ORIGINATING GOODS REFERRED TO IN ARTICLE 4.3 Section 1: Table of Goods (in HS Code) Chapter 12 Oil Seeds and Oleaginous Fruits; Miscellaneous Grains, Seeds and Fruit; Industrial or Medicinal
More informationFast and flexible use Powerful results
Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete
More information24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA
24-27 MAY 2017 PUTRA WORLD TRADE CENTRE KUALA LUMPUR, MALAYSIA THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION EXHIBITORS PROFILE MACHINE TOOLS Boring, Broaching, CNC
More informationGrinding drill machine OPERATION MANUAL - 1 -
Grinding drill machine OPERATION MANUAL - 1 - Index: I. Safety Notification P.4 II. Machine Devices Introduction P.9 III. Machine Installation Instruction P.11 IV. Standard Operational Steps P.13 V. Replacement
More informationGENERAL AGREEMENT ON TARIFFS AND TRADE
RESTRICTED GENERAL AGREEMENT ON TARIFFS AND TRADE L/2325 23 December 1964 Limited Distribution CENTRAL AMERICAN ECONOMIC INTEGRATION Annual Report (1964) by the Government of Nicaragua Original: Spanish
More informationLANDMARK UNIVERSITY, OMU-ARAN
LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: DRILLING. COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MECHANICAL ENGINEERING ENGR. ALIYU, S.J Course code: MCE
More informationLecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing
Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool
More informationWOOD DRILL BITS WOOD WORKING WITH PROFESSIONAL TOOLS HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
WOO RILL WOO WORKING WITH PROFESSIONAL TOOLS WOO RILL METAL RILL RILL 184 Wood twist drill bit TURBOWOO 119 120 180 280 Wood twist drill bit 121 122 186 HSS wood twist drill bit 123 187 Wood twist drill
More informationHeavy-Duty Needle Scalers
Heavy-Duty Needle Scalers Heavy-Duty Needle Scalers Ideal for cleaning and stress-relieving weld seams and joints; texturing concrete; removing coatings, corrosion and other accumulated materials. Power
More informationPneumatic Robot arm/digger
1 0 6. 1 8 6 Pneumatic Robot arm/digger Please Note The OPITEC range of projects is not primarily intended as toys for young children. It is for teaching, designing and making to ensure that pupils experience
More informationThe manufacture of abrasive articles or shaped materials containing macromolecular substances, e.g. as bonding agent, is covered by C08J5/14.
CPC - B24D - 2016.11 B24D TOOLS FOR GRINDING, BUFFING, OR SHARPENING (tools for grinding or polishing optical surfaces on lenses or surfaces of similar shape B24B 13/01; grinding heads B24B 41/00; manufacture
More informationVehicle with robotic arm
1 0 6. 2 0 2 Vehicle with robotic arm Please Note The OPITEC range of projects is not intended as play toys for young children.they are teaching aids for young people learning the skills of Craft, Design
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationDesign and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
More informationDIY CIDER PRESS. If you ever fancied making your own cider, now is your chance! To build a cider press you will need the following;
DIY CIDER PRESS If you ever fancied making your own cider, now is your chance! To build a cider press you will need the following; Plain timber (we used CLS Timber 40x90cm) Plywood (we used 18mm marine
More informationARTICLE XXVIII NEGOTIATIONS NEGOTIATIONS RELATING TO SCHEDULE XV - PAKISTAN
-ftjbt GENERAL AGREEMENT ON.~ ^~*~- /127/Md. 10 * TARIFFS AND TRADE auuiy i96i No ^ O ARTICLE XXVIII NEGOTIATIONS - 1960 NEGOTIATIONS RELATING TO SCHEDULE XV - PAKISTAN The Delegations of Pakistan and
More informationTUCANA-02 P PORTABLE END MILLING MACHINE USER S MANUAL
TUCANA-02 P PORTABLE END MILLING MACHINE USER S MANUAL 1 CONTENTS Page 1. General Information 3 1.1. Introduction 3 1.2. Manufacturer 3 2. Machine s Description and Purpose of Use 3 2.1. Machine s description
More informationCHAPTER 44 AS AMENDED BY COUNCIL RECOMMENDATION OF 27 JUNE 2014
CHAPTER 44 AS AMENDED BY COUNCIL RECOMMENDATION OF 27 JUNE 2014 Section IX WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL; CORK AND ARTICLES OF CORK; MANUFACTURES OF STRAW, OF ESPARTO OR OF OTHER PLAITING MATERIALS;
More informationKACT, WCO Headquarters, Brussels, Belgium, June, 30 July, 11, Harmonized System GIRs and High-Tech and related products.
KACT, WCO Headquarters, Brussels, Belgium, June, 30 July, 11, 2014 Harmonized System GIRs and High-Tech and related products Izaak Wind 1 Programme Overview & Positioning Table of Contents Day 2 Tuesday,
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationItem# " VARIABLE SPEED BENCH GRINDER USER'S MANUAL
Power Tools Item# 33309 3" VARIABLE SPEED BENCH GRINDER USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other
More informationWood and articles of wood; wood charcoal
Chapter 44 ( 1 ) Wood and articles of wood; wood charcoal Notes. 1.- This Chapter does not cover : (a) Wood, in chips, in shavings, crushed, ground or powdered, of a kind used primarily in perfumery, in
More informationRoll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/ TECHNOLOGY OF MACHINING. Time Allotted : 3 Hours Full Marks : 70
Name : Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/2009-10 2009 TECHNOLOGY OF MACHINING Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates
More informationIMPREGNATED, COATED, COVERED OR LAMINATED TEXTILE FABRICS; TEXTILE ARTICLES OF A KIND SUITABLE FOR INDUSTRIAL USE
CHAPTER 59 IMPREGNATED, COATED, COVERED OR LAMINATED TEXTILE FABRICS; TEXTILE ARTICLES OF A KIND SUITABLE FOR INDUSTRIAL USE Notes 1. Except where the context otherwise requires, for the purposes this
More informationPRODUCT GUIDE. Metals, Materials, Fixings and Tools for Engineering, Construction and Maintenance ESTABLISHED 1970
PRODUCT GUIDE Metals, Materials, Fixings and Tools for Engineering, Construction and Maintenance ESTABLISHED 1970 STAINLESS STEEL & ALUMINIUM Avery Knight & Bowlers (AKB) stock a comprehensive range of
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationH. Manufacturing process workers
H. Manufacturing process workers manufacturing facilities, the work of processing raw materials using machinery, apparatus, hand tools, etc., the work of assembling, adjusting, repairing and inspecting
More informationCHAPTER 1- INTRODUCTION TO MACHINING
CHAPTER 1- INTRODUCTION TO MACHINING LEARNING OBJECTIVES Introduction to Manufacturing, Manufacturing processes Broad classification of Manufacturing processes Kinematics elements involved in metal cutting
More informationWARNING. Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 80156, 80160 Application: 2008 Ford F150 Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More informationCOMPLEX GRINDER OF MILL& DRILL
COMPLEX GRINDER OF MILL& DRILL MODEL: MR-F6 OPERATING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationCOMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust,
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationTIE-ROD AND PIPE JOINTS
CHAPTER 5 Machines use various parts which are joined in several ways for the machine to function as whole. We have learnt about some devices like fasteners (temporary & permanent) and some simple joints
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More information0445 DESIGN AND TECHNOLOGY
CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education MARK SCHEME for the May/June 2014 series 0445 DESIGN AND TECHNOLOGY 0445/33 Paper 3 (Resistant Materials),
More informationRoughing vs. finishing
Finishing methods Roughing vs. finishing Roughing removing material as fast as possible, without special demands on surface and low demand on precision high Q, high IT, high Ra Finishing making final surface
More informationCUSTOMS TARIFF - SCHEDULE XIII - 1
XIII - 1 Section XIII ARTICLES OF STONE, PLASTER, CEMENT, ASBESTOS, MICA OR SIMILAR MATERIALS; CERAMIC PRODUCTS; GLASS AND GLASSWARE 69 - i Chapter 69 CERAMIC PRODUCTS Notes. 1. This Chapter applies only
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationDRILL AND TAP KITS. Features O V E R V I E W. TTT001 Tap Guide for Optical Tables and Breadboards. XE25TG Tap Guide for 25 mm Rails.
DRILL AND TAP KITS Individual Imperial & Metric Plug Taps 115 Piece Bit Set Tap Guides Help Ensure Tapped Holes are Perpendicular to Flat Surfaces TW25 Tap Wrench TTT001 Tap Guide for Optical Tables and
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationThe Lyra Double Double Mounting System Manual
The Lyra Double Double Mounting System Manual The Lyra DDMS is a device for quickly connecting two cylinders together. It is specifically designed for connecting a finder scope to a larger telescope without
More informationExports of Pakistan during the first quarter (Jul-Oct), FY18
Exports of Pakistan during the first quarter (Jul-Oct), FY18 During the first quarter (Jul-Oct), the total exports of goods were US$ 6.9 billion in fiscal year 2017 which surged to US$ 7.6 billion in fiscal
More information