ARTICLE XXVIII NEGOTIATIONS NEGOTIATIONS RELATING TO SCHEDULE XV - PAKISTAN

Size: px
Start display at page:

Download "ARTICLE XXVIII NEGOTIATIONS NEGOTIATIONS RELATING TO SCHEDULE XV - PAKISTAN"

Transcription

1 -ftjbt GENERAL AGREEMENT ON.~ ^~*~- /127/Md. 10 * TARIFFS AND TRADE auuiy i96i No ^ O ARTICLE XXVIII NEGOTIATIONS NEGOTIATIONS RELATING TO SCHEDULE XV - PAKISTAN The Delegations of Pakistan and the United States of America have concluded their negotiations under Article XXVIII for the modification or withdrawal of concessions provided for in Schedule XV, as set out in the report attached. Signed for the Delegation of Pakistan Signed for the Delegation of the United States of America 20 July 1961 English only Anglais seulement

2 -. «. >,* :.v^m Results of Negotiating and/or Consultations with the Government of thé united States of America under Article XXVin for the Modification or Withdrawal of Concessions in the Schedule of Pakistan CHANGES IN SCHEDUIE XV - PAKISTAN A. CONCESSIONS TO BE WITHDRAWN Tariff ítem Number L ' Rates of Duty "" " Before On ar..d after Description of Products bound In ,7.60 Existing Schedule Ex.21(l) Ex Blended flavouring concentrates for the preparation of non-alcoholic beverages 3Q# ad val* Ex.27(3) Ex,27 t lqd(iv) All sorts of mineral oils not other- Ex E(ii) wise specified (b) Ex,30(1) Ex Dyes derived from coal-tar, and coal- Ex. 32.0!?B(vi) tar derivatives, used in any dyeing process, all sorts, other than Alizarine moist exceeding 20 percent, Alizarine red, Azo dyes, Sulphur black, Sulphur dyes of other colours, Ultrazols and Vats, powder 27# ad val. 12% ad val. Ex.U5 Ex. 70(1) Ex. 8.03A(ii) Fountain pens, complete, of a c.i.f. value, exceeding Rupees Seven and Annas three per pen 7li.01A(ii) Copper, unwrought (a) 305S ad val. Free Ex.72 8U.1E>B Refrigerating machinery other than domestic refrigerators Ex.72 Ex Cinema-rirojecting apparatus^ soundrecording apparatus for the production of cinema films 72(5) 8U.l5A.(i) ) Domestic refrigerators and parts therefor Ex.8i*,15A(ii)) such as are especially designed for use with such refrigerators 10JS ad val. 10$ ad val ad val. f»ü a*«>fe* «dfafc

3 s *5vr7^ Tariff Item Number Before On and after 1*7*60 Ex.72(6) Ex.8U.52 ) Ex.8U.53 ) Ex.8U.5U ) Ex.8U.55B) 92.11A) Ex. 72(8) Ex Ex.87.06A -2 - Description of Products Office machines all sorts, not otherwise specified, operated by manual labour or requiring for their operation less than one quarter of one brake-horse power and component parts thereof Agricultural tractors and parts thereof Rates of Duty bound in Existing Schedule 20% ad val. Free Ex. 77(2) ) ) ) ) ) Optical instruments 20# ad val. Ex.78 Ex Ex.91.0U One-day alarm clocks $0% ad val. Ex.87 Ex ) Ex ) Ex ) Thermoplastic and thermosetting moulding powders?p*îê»i«* '-"'/' -,5:5i

4 i B. CONŒSSIONS TO BE IÍODIPTED Tariff Item Number Before On and after Description of Products Rates of Dutybound in Existing Schedule Rates of Duty to be Bound Ex.15 Ex Mineral grease 27$ ad val. Ex.72 Ex Electric generators, generating sets, and component parts thereof 8$ ad val, 12 $ ad val. Ex.72 Ex.8U.23 Ex. 72 (3) Ex.72 Ex.8U. 59 Ex.72(3) Ex. 72(6) Ex.8U.5l ) 8U.55A) Mining machinery, petroleum and gas-well drilling equipment, and such compenent parts thereof only as are essential for the working of the machine or equipment and have been riven for that purpose some special shape or quality which would not be essential for their use for any other purpose, but excluding electric motors, belting and steel belt lacing Oil-crushing and refining machinery and such component parts thereof only as are essential for the working of such machinery and have been given for that purpose some special shape or quality which would not be essential for their use for any other puroose, but excluding electric motors, belting and steel belt lacing Typewriters and component parts thereof, excluding typewriter ribbons 10$ ad val. 12i$ ad val» 10$ ad val. 12 $ ad val.

5 \wq C. NEW CONCESSION ON ITEM IN THE EXISTING SCHEDULE Tariff Item Number Before On and after :U Description of Products Rate of Duty bound in Existing Schedule Rates' of 1 Duty to be Bound K.U(1) OU.02B(i) Dried skim milk, that is to say, dried milk powder containing not more than h percent of fat and no added ingredients Free!xee A txd'l^i

6 t. ->, ",, -5 - D. NEW CONCESSIONS ON ITEMS NOT IN EXISTING SCHEDUIE Tariff Item Number Description of Products Statutory Rates of Euty at present- in force Rates of Duty to be Bound 0U.02B(ii) Milk and cream, preserved, concentrated or sweatoned: Dry (in solid form such as blocks and powder): Other Ex Insecticides, fongicides, polychlor insecticides, and agricultural insecticides h5% ad val. 12 $ ad val. 8U.S2 Calculating machines, accounting machines, cash registers, postagefranking machines, ticket-issuing machines and similar machines, incorporating a calculating device 8U.53 Statistical machines of a kind operated in conjunction with punched cards (for example, sorting, calculating and tabulating machines) accounting machines operated in conjunction with similar punched cards, auxiliary machines for use with such machines (for example, punching and checking machines) 305? ad val* 8U.& Other office machines (for exanple, hectograph or stencil duplicating machines, addressing machines, coinsorting machines, coin-counting machines and wrapping machines, pencil-sharpening machines, perforating and stapling machines; 30$ ad val» 8U.55B Parts and a:sussscries (other than covers, car:y±u% ciases and the like) suitable for use solely or principally with machines of a kind falling within heading Nos. 8U.52, 8lu$3 or 8U.5U 30$ ad val* 8U.l5B(i) Other refrigerating equipment requiring for their operation not less than onequarter of one brake-horse power 12 $ ad val. 12 $ ad val. ïmgar*'i-r**~*ï-

7 '»"-«>^ WTWm.6. Tariff Item Number Description of Products Statutory Rates of Duty at present in force '"" Rates of Duty to be Bound Ex. 87,06A Ex.90.08B Tractors (other than those falling within heading No )> whether or not fitted with power take-offs, winches or pulleys $% ad val. $% ad val. Parts and accessories exclusively useable for tractors falling within heading No only %% ad val. 556 ad val. Cinematographic projectors and sound recorders for films of a width of over 16 mm 12 2 ad val. 1%% ad val. 90.U Surveying (including photogrammetrical surveying), hydrographie, navigational meteorological, hydrologicil and geophysical instruments; compasses; rangefinders *&% ad val Instruments and apparatus for physical or chemical analysis (such as polarimeters, refractometers, spectrometers, gas analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like (such as viscometers, porosimeters, expansion meters); instruments and apparatus for measuring or checking quantities of heat, light or sound (such as photometers (including exposure meters) calorimeters); microtomes 12 2 ad val. 92. UA Dictaphones and other sound recorders and reproducers for office use 30% ad val. 30JC ad val.

CRET. NEGOTIATIONS RELATING TO-SCHEDPIjE 7 - CANADA. Article XXVIII:4

CRET. NEGOTIATIONS RELATING TO-SCHEDPIjE 7 - CANADA. Article XXVIII:4 CRET "E-L No ^o GENERAL AGREEMENT CM T A m p p p AklrN Tr, APvr. SECEST/106/Md, 13 * TARIFFS AND TRADE 15 June wei NEGOTIATIONS RELATING TO-SCHEDPIjE 7 - CANADA Article XXVIII:4 C The Delegations of Japan

More information

^-& ARTICLE XXVIII NEGOTIATIONS - I960 NEGOTIATIONS RELATING TO SCHEDULE VI - OEYLON

^-& ARTICLE XXVIII NEGOTIATIONS - I960 NEGOTIATIONS RELATING TO SCHEDULE VI - OEYLON "M«, GENERAL AGREEMENT ON TARIFFS AND TRADE No ^-& SECRET/116/Add f 16 * 15 June i/ei ARTICLE XXVIII NEGOTIATIONS - I960 NEGOTIATIONS RELATING TO SCHEDULE VI - OEYLON The Delegations of Ceylon and the

More information

ARTICLE XXVIII NEGOTIATIONS Negotiations relating to Schedule I - Australia

ARTICLE XXVIII NEGOTIATIONS Negotiations relating to Schedule I - Australia tjx. GENERAL AGREEMENT ON TARIFFS AND TRADE No M /119/Md. 7 * ie May wei ARTICLE XXVIII NEGOTIATIONS - 1960 Negotiations relating to Schedule I - Australia The Delegations of Australia and Italy have concluded

More information

ARTICLE XXVIII:5 NEGOTIATIONS. Schedule XXXVIII - Japan. Addendum

ARTICLE XXVIII:5 NEGOTIATIONS. Schedule XXXVIII - Japan. Addendum GENERAL AGREEMENT ON TARIFFS AND TRADE No. cm SECRET/3w/Add.i Original: English ARTICLE XXVIII:5 NEGOTIATIONS Schedule XXXVIII - Japan Addendum The following communication, dated 28 March 1986, has been

More information

See bound volume for Atf&t of this series

See bound volume for Atf&t of this series GENERAL TARIFFS Af See bound volume for Atf&t of this series L^' for addenda/corrigenda/revisions 2> to this document. IAA See bound volume for...td.fj.cuzf. of this series No ^ for addenda/corrigenda/revisions

More information

PABTICIPATIHG COUMTRIBS TRADE WITH BAMffl.ADKSH

PABTICIPATIHG COUMTRIBS TRADE WITH BAMffl.ADKSH RESTRICTED GENERAL AGREEMENT ON ïï&gfim TARIFFS AND TRADE Special Distribution Preferential Arrangements Among Dev"T"fif7fl ffiuatries Negotiated la GATT Original: English PABTICIPATIHG COUMTRIBS TRADE

More information

SECRET NEGOCIATIONS AU TITRE DE L'ARTICLE. Liste XXXVIII - Japon. Addendum

SECRET NEGOCIATIONS AU TITRE DE L'ARTICLE. Liste XXXVIII - Japon. Addendum SECRET ACCORD GENERAL SUR LES TARIFS DOUANIERS ET LE COMMERCE No. 0 0 7 ' ' l^lllnv^ Original: anglais NEGOCIATIONS AU TITRE DE L'ARTICLE XXVIII:5 Liste XXXVIII - Japon Addendum La délégation du Japon

More information

GENERAL AGREEMENT ON " c -"^r" 1^ *- * No -- _. _. a -... _ SECRET/loO TARIFFS AND TRADE 18 September 1968

GENERAL AGREEMENT ON  c -^r 1^ *- * No -- _. _. a -... _ SECRET/loO TARIFFS AND TRADE 18 September 1968 See bound volume for...sl.tfgi*} of this set for addenda/corrigenda/revisions A "Z to this document. m \. jit, GENERAL AGREEMENT ON " c -"^r" 1^ *- * No -- _. _. a -..... _ SECRET/loO TARIFFS AND TRADE

More information

SECRET. ACUERDO GENERAL SOBRE SECRET/319/Add.1 ARANCELES ADUANEROS Y COMERCIO 3 de abril de 1986 NEGOCIACIONES EN VIRTUD DEL ARTICULO XXVIII:5

SECRET. ACUERDO GENERAL SOBRE SECRET/319/Add.1 ARANCELES ADUANEROS Y COMERCIO 3 de abril de 1986 NEGOCIACIONES EN VIRTUD DEL ARTICULO XXVIII:5 SECRET,o 05 ACUERDO GENERAL SOBRE SECRET/319/Add.1 ARANCELES ADUANEROS Y COMERCIO 3 de abril de 1986 Original: inglés NEGOCIACIONES EN VIRTUD DEL ARTICULO XXVIII:5 Lista XXXVIII - Japón Addendum Se ha

More information

ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY SECTION XVI

ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY SECTION XVI SECTION XVI MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS; AND PARTS AND ACCESSORIES OF

More information

GENERAL AGREEMENT ON TARIFFS AND TRADE

GENERAL AGREEMENT ON TARIFFS AND TRADE t^t^më GENERAL AGREEMENT ON TARIFFS AND TRADE RESTRICTS) L/2480 12 October 1965 Limited Distribution Original: English SOUTH AFRICAN IMPORT RESTRICTIONS 1. The following statement concerning application

More information

Country Profile China

Country Profile China Country Profile China Introduction Location Capital Eastern Asia, bordering the East China Sea, Korea Bay, Yellow Sea, and South China Sea, between North Korea and Vietnam Beijing Area 9,596,960 sq. km

More information

TARIFFSAND TRADE TARIFFS AND TRADE Limited Distribution. ''I have decided that generally the same principle that applicable to raw

TARIFFSAND TRADE TARIFFS AND TRADE Limited Distribution. ''I have decided that generally the same principle that applicable to raw RESTRICTED GENERAL AGREEMENT ON L/2480 12 October 1965 TARIFFSAND TRADE TARIFFS AND TRADE Limited Distribution SOUTH AFRICAN IMPORT RESTRICTIONS Original: English 1. The following statement concerning

More information

Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) July/2013 Issue 01

Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) July/2013 Issue 01 Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) July/2013 Issue 01 Industrial Production Statistics (IPS) is a regular publication of Bangladesh Bureau of

More information

SECTION XVIII CHAPTER 90

SECTION XVIII CHAPTER 90 31.10.2017 EN Official Journal of the European Union L 282/639 SECTION XVIII OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS

More information

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments. Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining

More information

January/2014 Issue 07

January/2014 Issue 07 Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) January/2014 Issue 07 Bangladesh Bureau of Statistics (BBS) publishes the Industrial Production Statistics

More information

10 Mining of Coal and Lignite; extraction of Peat

10 Mining of Coal and Lignite; extraction of Peat A 01-02 Agriculture, hunting and forestry B 05 Fishing C 10-14 Mining and quarrying 10 Mining of Coal and Lignite; extraction of Peat 101 Mining and agglomeration of hard coal 102 Mining and agglomeration

More information

October/2013 Issue 04

October/2013 Issue 04 Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) October/2013 Issue 04 Industrial Production Statistics (IPS) compilation and publication is a regular task

More information

Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) March/2014 Issue 09

Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) March/2014 Issue 09 Monthly Release of Industrial Production Statistics (IPS) Bangladesh Bureau of Statistics (BBS) March/2014 Issue 09 Bangladesh Bureau of Statistics (BBS) publishes the Industrial Production Statistics

More information

HANDBOOK OF PRECISION ENGINEERING

HANDBOOK OF PRECISION ENGINEERING HANDBOOK OF PRECISION ENGINEERING HANDBOOK OF PRECISION ENGINEERING Volume 1 Fundamentals Volume 2 Materials Volume 3 Fabrication of Non-metals Volume 4 Physical and Chemical Fabrication Techniques Volume

More information

FREE TRADE AGREEMENT BETWEEN UKRAINE AND TURKMENISTAN. Annex Information on the regional trade agreement

FREE TRADE AGREEMENT BETWEEN UKRAINE AND TURKMENISTAN. Annex Information on the regional trade agreement FREE TRADE AGREEMENT BETWEEN UKRAINE AND TURKMENISTAN Annex Information on the regional trade agreement FREE TRADE AGREEMENT between the Government of Ukraine and the Government of Turkmenistan 1. Membership:

More information

2015 Third Quarter. Manufacturing )2012=100( Preliminary. Producer Price Index (PPI)

2015 Third Quarter. Manufacturing )2012=100( Preliminary. Producer Price Index (PPI) Manufacturing )2012=100( 2015 Third Quarter Preliminary Released ProducerDate: PriceDecember Index (PPI) 2015 1 Table of Contents Introduction... 3 Key Points... 4 Producer Price Index for the third quarter

More information

Paint and Allied Products 1998

Paint and Allied Products 1998 Paint and Allied Products 1998 Issued February 2000 MA325F(98)-1 (Formerly Series No. MA28F) Information about the scope of the survey, System (NAICS) basis and therfore are not methodology, explanation

More information

Country Profile Portugal

Country Profile Portugal Country Profile Portugal Introduction Location Southwestern Europe, bordering the North Atlantic Ocean, west of Spain Capital Lisbon Area 92,090 sq. km Population Official Languages Ethnic groups Independence

More information

Producer Price Index (PPI) Manufacturing )2012=100( First Quarter

Producer Price Index (PPI) Manufacturing )2012=100( First Quarter Manufacturing )2012=100( 2015 First Quarter Released ProducerDate: Price June Index2014 (PPI) 1 Table of Contents Introduction... 3 Key Points... 4 Producer Price Index for the first quarter of 2015 compared

More information

Success of the ITA and Product Coverage Issues

Success of the ITA and Product Coverage Issues 2008/SOM1/MAG/WKSP/004 Session: 2 Success of the ITA and Product Coverage Issues Submitted by: USA Workshop on Information Technology / Electronics Industry Lima, Peru 20 February 2008 Success of the ITA

More information

carbons and other pressure-sensitive layers or coatings specifically adapted for manifolding;

carbons and other pressure-sensitive layers or coatings specifically adapted for manifolding; CPC - B41L - 2017.08 B41L APPARATUS OR DEVICES FOR MANIFOLDING, DUPLICATING, OR PRINTING FOR OFFICE OR OTHER COMMERCIAL PURPOSES; ADDRESSING MACHINES OR LIKE SERIES-PRINTING MACHINES (printing presses

More information

Country Profile Canada

Country Profile Canada Country Profile Canada Introduction Location Capital Northern North America, bordering the North Atlantic Ocean on the east, North Pacific Ocean on the west, and the Arctic Ocean on the north, north of

More information

OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF

OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF CHAPTER 90 OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF Notes 1. This chapter does not cover: (a)

More information

Country Profile United States of America

Country Profile United States of America Country Profile United States of America Introduction Location Capital Area Bordering both the North Atlantic Ocean and the North Pacific Ocean, between Canada and Mexico Washington, DC 9,833,517 sq. km

More information

SPAIN PAKISTAN TRADE 1

SPAIN PAKISTAN TRADE 1 SPAIN PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 PAKISTAN'S EXPORTS TO EU, 2016 EU is Pakistan s largest export market representing 34% of exports. Spain accounted for 12% of total EU imports

More information

PORTUGAL PAKISTAN TRADE

PORTUGAL PAKISTAN TRADE PORTUGAL PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 EU is Pakistan s largest export market representing 34% of exports. PAKISTAN'S EXPORTS TO EU, 2016 Portugal accounted for 2.3% of total

More information

Manufactured goods by degree of manufacturing groups (SITC Rev. 3)

Manufactured goods by degree of manufacturing groups (SITC Rev. 3) TDRA Manufactured goods by degree of manufacturing TDRB Labour-intensive and resource-intensive manufactures 1 611 Leather 1 612 Manufactures of leather, n.e.s.; saddlery & harness 1 613 Furskins, tanned

More information

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM)

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM) Class: 1 st Semester 15/12/2018 20/12/2018 26/12/2018 31/12/2018 04/01/2019 09/01/2019 ALL BRANCHS ECEPT MLT, OMCA, TT, TD, ARCH App. Physics-I Theory Examination Sheet for Diploma Courses Session Nov-Dec,

More information

SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF. (a) articles of a kind used in machines, appliances or for other

SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF. (a) articles of a kind used in machines, appliances or for other SECTION XVIII OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS AND WATCHES; MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES THEREOF

More information

SECTION XVIII CHAPTER 90

SECTION XVIII CHAPTER 90 31.10.2017 EN Official Journal of the European Union L 282/639 SECTION XVIII OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4114.2 Australian/New Zealand Standard Spray painting booths, designated spray painting areas and paint mixing rooms Part 2: Installation and maintenance This Joint Australian/New Zealand Standard

More information

Type of non-obnoxious and non-nuisance type of service or Light industries permissible in residential zones.

Type of non-obnoxious and non-nuisance type of service or Light industries permissible in residential zones. ANNEXURE ANNEXURE I Type of non-obnoxious and non-nuisance type of service or Light industries permissible in residential zones. 1. Production of copra 2. Processing of arecanut 3. Rice and Flour Mills.

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 27-11-2013 02:30 To 05:00 160102 Fundamentals of Jet Propulsion 29-11-2013 02:30 To 05:00 160103 Vibration

More information

ANNEXB. 6-digit HS Code. No. Description

ANNEXB. 6-digit HS Code. No. Description ANNEXB 1 080211 Almonds fresh or dried in shell 2 130110 Lac 3 130120 Gum Arabic 4 130190 Others 5 140110 Bamboos 6 140120 Rattans 7 140190 Other 8 170490 Other Limestone flux; limestone and other calcareous

More information

The type of drafting we will be studying is called mechanical drafting. It is the typical foundation of all drafting fields.

The type of drafting we will be studying is called mechanical drafting. It is the typical foundation of all drafting fields. Design Drafting Lectures Lecture 1 Introduction: Tools and Trades Drafter Defined: Drafters translate ideas and sketches of engineers, architects, and scientists into detailed drawings which are used in

More information

RESTRICTED 2-4 June 1957 CONSULTATION UNDER ARTICLE XII: 4(b) WITH THE FEDERAL REPUBLIC OF GERMANY

RESTRICTED 2-4 June 1957 CONSULTATION UNDER ARTICLE XII: 4(b) WITH THE FEDERAL REPUBLIC OF GERMANY RESTRICTED 2-4 June 1957 CONSULTATION UNDER ARTICLE X: 4(b) WITH THE FEDERAL REPUBLIC OF GERMANY > Corrigendum to the Basic Document The German Delegation has asked that the following alterations be made

More information

Linings / Interlinings Motifs Needles & Thread Rhinestone Accessories Ribbons Rubber Bands Trimmings Zippers & Many more...

Linings / Interlinings Motifs Needles & Thread Rhinestone Accessories Ribbons Rubber Bands Trimmings Zippers & Many more... VISITOR PROFILE Garment Manufacturers Knitwear Manufacturers Textile Manufacturers Leather Goods Manufacturers Design Studios & Institutes Apparel Brands & Labels Laundry Operators & Dry Cleaners Buying

More information

Class: 2 nd Semester (New Scheme)

Class: 2 nd Semester (New Scheme) Class: 2 nd Semester (New Scheme) 12/06/2019 14/06/2019 18/06/2019 21/06/2019 25/06/2019 28/06/2019 Civil/PHE Civil Electrical Mechanical Automobile Wood Tech Textile Tech Leather Tech Physics- Chemistry-

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY 01 AERONAUTICAL 160101 AERODYNAMICS-II 160102 FUNDAMANTALS OF JET PROPULSION 160103 VIBRATION AND NOISE CONTROL 160104 BASIC CONTROL THEORY 160105 COMPUTATIONAL FLUID DYANAMICS -II 160106 AVIONICS 02 AUTOMOBILE

More information

25 July 2017 Without prejudice [PROVISIONS IN RELATION TO TRADE IN GOODS ALREADY INCLUDED IN THE EU TEXT PROPOSAL FOR THE TRADE IN GOODS CHAPTER]

25 July 2017 Without prejudice [PROVISIONS IN RELATION TO TRADE IN GOODS ALREADY INCLUDED IN THE EU TEXT PROPOSAL FOR THE TRADE IN GOODS CHAPTER] 25 July 2017 Without prejudice This document is the European Union's (EU) proposal for legal text provisions on energy and raw materials in the EU-Indonesia FTA. It will be tabled for discussion with Indonesia.

More information

SECTION XIII. Articles of Stone, Plaster, Cement, Asbestos, Mica or Similar Materials; Ceramic Products; Glass and Glassware CHAPTER - 68

SECTION XIII. Articles of Stone, Plaster, Cement, Asbestos, Mica or Similar Materials; Ceramic Products; Glass and Glassware CHAPTER - 68 i.exe Notes : SECTION XIII Articles of Stone, Plaster, Cement, Asbestos, Mica or Similar Materials; Ceramic Products; Glass and Glassware 1. This Chapter does not cover : CHAPTER - 68 Articles of stone,

More information

KACT, WCO Headquarters, Brussels, Belgium, June, 30 July, 11, Harmonized System GIRs and High-Tech and related products.

KACT, WCO Headquarters, Brussels, Belgium, June, 30 July, 11, Harmonized System GIRs and High-Tech and related products. KACT, WCO Headquarters, Brussels, Belgium, June, 30 July, 11, 2014 Harmonized System GIRs and High-Tech and related products Izaak Wind 1 Programme Overview & Positioning Table of Contents Day 2 Tuesday,

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY 01 Aeronautical 160101 Aerodynamics-II 16/05/2011 160102 Fundamantals of Jet Propulsion 17/05/2011 160103 Vibration and Noise Control 19/05/2011 160104 Basic Control Theory 21/05/2011 160105 Computational

More information

2010D0002 EN

2010D0002 EN 2010D0002 EN 07.09.2012 002.001 9 ANNEX Sectors and subsectors which, pursuant to Article 10a(13) of Directive 2003/87/EC, are deemed to be exposed to a significant risk of carbon leakage 1. AT THE NACE-4

More information

https://www.indiamart.com/asiansci/

https://www.indiamart.com/asiansci/ +91-8079456316 Asian Scientific Instruments https://www.indiamart.com/asiansci/ Our company specializes in supplying and trading a technologically advanced range of laboratory instruments, deep freezers

More information

Volume URL: Chapter Title: Appendix E: Industrial Classification. Chapter URL:

Volume URL:  Chapter Title: Appendix E: Industrial Classification. Chapter URL: This PDF is a selection from an out-of-print volume from the National Bureau of Economic Research Volume Title: Outlay and Income in the United States, 1921-1938 Volume Author/Editor: Harold Barger Volume

More information

Measurement & Control Technology

Measurement & Control Technology Measurement & Control Technology For process and laboratory analysis s Material properties s Colour measurement s Radiation measurement s Moisture measurement (NIR, microwave & RF) s Refractometers M.C.

More information

NIC 2008 CODES (Sections, Divisions and Groups) Agriculture, forestry and fishing. Crop and animal production, hunting and related service activities

NIC 2008 CODES (Sections, Divisions and Groups) Agriculture, forestry and fishing. Crop and animal production, hunting and related service activities ANNEXURE-2 Section A Division 01 Group 011 Group 012 Group 013 Group 014 Group 015 Group 016 Group 017 Division 02 Group 021 Group 022 Group 023 Group 024 Division 03 Group 031 Group 032 Section B Division

More information

IAF MD 10:2013 IAF Mandatory Document for Assessment of CB Management of Competence in Accordance with ISO/IEC 17021:2011

IAF MD 10:2013 IAF Mandatory Document for Assessment of CB Management of Competence in Accordance with ISO/IEC 17021:2011 IAF Mandatory Document for Assessment of CB Management of Competence in Accordance with ISO/IEC 17021:2011 4. Table of Contents 1. INTRODUCTION 2. DEFINITIONS 3. GENERAL 4. TECHNICAL AREAS 5. DETERMINATION

More information

Country Profile Saudi Arabia. Introduction

Country Profile Saudi Arabia. Introduction Country Profile Saudi Arabia Introduction Location Area Middle East, bordering the Persian Gulf and the Red Sea, north of Yemen 2,149,690 sq. km Capital Riyadh Population 28,571,770 (July 2017 est.) Official

More information

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

We can provide you detailed project reports on the following topics. Please select the projects of your interests. Petroleum and Petroleum Products, Refining, Greases, Lube Oil, Brake Fluid, Automotive & Industrial Lubricants, Gear Oils, Wax & Wax Products, Paraffin Wax, Polishes, Bitumen, Base Oil, Crude Oil,Fuel

More information

CANADIAN PLASTICS INDUSTRY ASSOCIATION

CANADIAN PLASTICS INDUSTRY ASSOCIATION CANADIAN PLASTICS INDUSTRY ASSOCIATION 1 2 TABLE OF CONTENTS PLASTICS: BUSINESS & TECHNOLOGY Pages 1-6 TEACHER S NOTES ACTIVITY CARDS Card N 0 MB-1 MB-2 MB-3 MB-4 MB-5 MB-6 MB-7 THE STRUCTURE OF THE PLASTIC

More information

FREE-TRADE AREA BETWEEN NICARAGUA AND EL SALVADOR. Sixth Annual Report (1957) by the Government of Nicaragua

FREE-TRADE AREA BETWEEN NICARAGUA AND EL SALVADOR. Sixth Annual Report (1957) by the Government of Nicaragua RESTRICTED GENERAL AGREEMENT ON L/«83 TARIFFS AND TRADE 27 September 1957 Limited distribution Original: Spanish FREE-TRADE AREA BETWEEN NICARAGUA AND EL SALVADOR Sixth Annual Report (1957) by the Government

More information

NIC 2008 Group: 3-digit codes along with description

NIC 2008 Group: 3-digit codes along with description Annexure N: NIC 2008 Group: 3-digit codes along with description NIC-2008 (3-Digit) Group Description 011 Growing of non-perennial crops 012 Growing of perennial crops 013 Plant propagation 014 Animal

More information

CYPRUS PAKISTAN TRADE

CYPRUS PAKISTAN TRADE CYPRUS PAKISTAN TRADE 1 PAKISTAN S EXPORTS TO THE EU(28), 2016 EU is Pakistan s largest export market representing 34% of exports. PAKISTAN'S EXPORTS TO EU, 2016 Cyprus accounted for 0.07% of total EU

More information

Recommended Resources: The following resources may be useful in teaching this

Recommended Resources: The following resources may be useful in teaching this Unit D: Forest Products Lesson 4: Protecting and Preserving Wood Student Learning Objectives: Instruction in this lesson should result in students achieving the following objectives: 1. Explain the principal

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality Bangunan 4, Kompleks SIRIM 1 Persiaran Dato Menteri Peti Surat 7035 40911 Shah Alam

More information

accessories, e.g. underlays, for supporting all kind of substrates upon which writing or drawing operations have to be executed

accessories, e.g. underlays, for supporting all kind of substrates upon which writing or drawing operations have to be executed CPC - B43L - 2017.08 B43L ARTICLES FOR WRITING OR DRAWING UPON; {WRITING OR DRAWING AIDS;} ACCESSORIES FOR WRITING OR DRAWING (workshop equipment for marking-out work B25H 7/00; teaching hand-writing or

More information

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec,

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, 2 Class: 6 th Semester(OLD SCHEME) Date Civil /Civil(PHE) Electrical Mechanical Automobile Wood Tech E&C 12/12/2 14/12/2 16/12/2 18/12/2 Steel and Timber Structures and Drawing Repair & Buildings Control

More information

Marabu. Glass Ink GL. Field of Application. Characteristics

Marabu. Glass Ink GL. Field of Application. Characteristics Screen Printing Ink for glass, ceramics, metals, aluminium, chrome-plated parts, coated substrates, and thermosetting plastics Satin-gloss finish, semi-opaque, fast drying 2-component-ink-system, dishwasherproof

More information

Miscellaneous products

Miscellaneous products Retail and Service Industries Division Commodities (products and services) in alphabetical order according to North American Product Classification System () class 56191 - Miscellaneous products Disponible

More information

GENERAL AGREEMENT ON TARIFFS Al TRADE 3 July DRAFT NINTH PROTOCOL OF RECTIFICATIONS Aid MODIFICATIONS SCHEDULE XIV - NORWAY. List of Corrections

GENERAL AGREEMENT ON TARIFFS Al TRADE 3 July DRAFT NINTH PROTOCOL OF RECTIFICATIONS Aid MODIFICATIONS SCHEDULE XIV - NORWAY. List of Corrections GENERAL AGREEMENT ON TARIFFS Al TRADE RESTRICTED 3 July 1959 DRAFT NINTH PROTOCOL OF RECTIFICATIONS Aid MODIFICATIONS SCHEDULE XIV - NORWAY List of Corrections The Government of Norway has informed the

More information

Country Profile Togo

Country Profile Togo Country Profile Togo Introduction Location Western Africa, bordering the Bight of Benin, between Benin and Ghana Capital Lome Area 56,785 sq. km Population Official Languages Independence Day 7,965,055

More information

Proposed Changes in the rate of KVAT as per Finance Bill 2015 for the year w.e.f. 01 Apr Styrofoam and Styrofoam sheet 20%

Proposed Changes in the rate of KVAT as per Finance Bill 2015 for the year w.e.f. 01 Apr Styrofoam and Styrofoam sheet 20% Proposed Changes in the rate of KVAT as per Finance Bill 2015 for the year 2015-16 w.e.f. 01 Apr 2015 Commodity Proposed Rate of Tax 1. Styrofoam and Styrofoam sheet 20% 2. Printed banners, hoardings and

More information

EESTI PANK Governor s Decree No 15 4 November 2005

EESTI PANK Governor s Decree No 15 4 November 2005 EESTI PANK Governor s Decree No 15 4 November 2005 Procedure for Sending Banknotes and Coins to Eesti Pank The Decree shall be laid down under subsection 2 (1) of the Eesti Pank Act. 1. Establishing the

More information

THE INTERNATIONAL COMPETITIVENESS OF ECONOMIES IN TRANSITION THE UNTAPPED POTENTIAL: A CHALLENGE FOR BUSINESS AND GOVERNMENT BELARUS

THE INTERNATIONAL COMPETITIVENESS OF ECONOMIES IN TRANSITION THE UNTAPPED POTENTIAL: A CHALLENGE FOR BUSINESS AND GOVERNMENT BELARUS THE INTERNATIONAL COMPETITIVENESS OF ECONOMIES IN TRANSITION THE UNTAPPED POTENTIAL: A CHALLENGE FOR BUSINESS AND GOVERNMENT BELARUS NATIONAL COMPETITIVENESS ISSUES, CONSTRAINTS AND STRATEGIC IMPLICATIONS

More information

E-COMMERCE AS A TOOL FOR DEVELOPMENT : ANALYTICAL AND REGIONAL PERSPECTIVE ARUN JACOB

E-COMMERCE AS A TOOL FOR DEVELOPMENT : ANALYTICAL AND REGIONAL PERSPECTIVE ARUN JACOB E-COMMERCE AS A TOOL FOR DEVELOPMENT : ANALYTICAL AND REGIONAL PERSPECTIVE ARUN JACOB CONTENTS Context Defining e-commerce Analysing digital trade : challenges and approaches Regional trends in digital

More information

UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS

UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:

More information

Country Profile Tanzania

Country Profile Tanzania Country Profile Tanzania Introduction Location Capital Eastern Africa, bordering the Indian Ocean, between Kenya and Mozambique Dodoma Area 947,300 sq. km Population Official Language 52,482,726 (July

More information

Finalized & Validated by Industrial Advisory Group (IAG) 13th December National Competency Standards. For SOMUK

Finalized & Validated by Industrial Advisory Group (IAG) 13th December National Competency Standards. For SOMUK Finalized & Validated by Industrial Advisory Group (IAG) 13th December 2013 National Competency Standards For SOMUK Page 1 Introduction The National Competency Standards are written specifications of skill

More information

TPS 66. Edition 2 March TPS 66 / Edition: 2 Page 1 of 10

TPS 66. Edition 2 March TPS 66 / Edition: 2 Page 1 of 10 TPS 66 Edition 2 March 2018 UKAS Technical Policy Statement for the Implementation of IAF MD 17 Witnessing Activities for the Accreditation of Management Systems Certification Bodies TPS 66 / Edition:

More information

your long-term reliable partner

your long-term reliable partner Corporate Profile your long-term reliable partner 2018 Ozay Dokum www.ozaydokum.com 1 Key Figures - Integrated production facilities - 25 years of experience - 10.000 m 2 area - 120 employees - 45% export

More information

feeding and/or handling of substrates to be printed upon is covered from the in-feed device through the whole machine down to the delivery device,

feeding and/or handling of substrates to be printed upon is covered from the in-feed device through the whole machine down to the delivery device, B41F PRINTING MACHINES OR PRESSES (machines for manufacturing footwear incorporating printing or embossing apparatus A43D, e.g. A43D 8/26, A43D 95/14; presses in general B30B; making of printing surfaces

More information

GUIDELINES FOR THE TRADE TANZANIA. Pre-shipment Verification of Conformity to Standards

GUIDELINES FOR THE TRADE TANZANIA. Pre-shipment Verification of Conformity to Standards GUIDELINES FOR THE TRADE TANZANIA Pre-shipment Verification of Conformity to Standards This data sheet has been prepared specifically in respect of exports to Tanzania Date issued : 24/04/2015 Last modification

More information

Class 40. Explanatory Note. Basic No. Indication. Treatment of materials.

Class 40. Explanatory Note. Basic No. Indication. Treatment of materials. Class 40 Treatment of materials. Explanatory Note Class 40 includes mainly services not included in oer classes, rendered by e mechanical or chemical processing, transformation or production of objects

More information

U.S. Census Bureau Metalworking Machinery MQ333W(08)-5 Issued August 2009

U.S. Census Bureau Metalworking Machinery MQ333W(08)-5 Issued August 2009 U.S. Census Bureau Metalworking Machinery - 2008 MQ333W(08)-5 Issued August 2009 Address inquiries concerning these data to Investment Goods Industries Branch, U.S. Department of Commerce, Census Bureau,

More information

Welding Engineering Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee

Welding Engineering Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Welding Engineering Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Module - 4 Arc Welding Processes Lecture - 8 Brazing, Soldering & Braze Welding

More information

Courses of 6 th semester Session May-June, 2017(All Polytechnics of J&K, State)

Courses of 6 th semester Session May-June, 2017(All Polytechnics of J&K, State) Class: 6 th Semester(OLD SCHEME) Date Civil /Civil(PHE) Automobile Wood Tech IT Arch. Asstt. Inst. And Control Steel and Timber Structures and Drawing Motor Vehicle Act and Transport E-Commerce Quantity

More information

Designated Raw Materials and Environmental Assurance Data. Supplier Relations Department Procurement Center May, 2007

Designated Raw Materials and Environmental Assurance Data. Supplier Relations Department Procurement Center May, 2007 Designated Raw Materials and Environmental Assurance Data Supplier Relations Department Procurement Center May, 2007 Definitions of the 4 Designated Raw Materials Resin Resins used for injection and extrusion

More information

Changes to HTSUS Effective July 1, 2016: GSP Review & Implementation of ITA Tariff Cuts:

Changes to HTSUS Effective July 1, 2016: GSP Review & Implementation of ITA Tariff Cuts: Page1 Changes to HTSUS Effective July 1, 2016: GSP Review & Implementation of ITA Tariff Cuts: Statistical note 3 to Section XI of the HTS is moved to the general notes as new general statistical note

More information

Unit PO0205K Knowledge of Applying Fillers and Foundation Materials

Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:

More information

DENIM FINISHING WEKO OFFERS SOLUTIONS...

DENIM FINISHING WEKO OFFERS SOLUTIONS... DENIM FINISHING WEKO OFFERS SOLUTIONS... FIXATION OF INDIGO AND SULPHUR DYES RESIN FINISH AND FLAT FINISH TINTING AND OVER-DYEING SOFTNESS, LUSTRE AND BRILLIANCE BASE COATING FOR LEATHER AND GLOSSY FINISHES

More information

Installation Instructions: Urbanline Alu Selekta Clad

Installation Instructions: Urbanline Alu Selekta Clad Product description Ecology Technical data Urbanline Alu Selekta Clad (selekta façade profiles and heritageselekta façade profiles) are identical in terms of their core material and surface texture. However,

More information

B41. Note. Attention is drawn to Notes (1) and (2) following the title of subclass B41L. [6]

B41. Note. Attention is drawn to Notes (1) and (2) following the title of subclass B41L. [6] XXXX B41 PRINTING; LINING MACHINES; TYPEWRITERS; STAMPS (reproduction or duplication of pictures or patterns by scanning and converting into electrical signals H04N) [4] XXXX PRINTING MACHINES OR PRESSES

More information

Duties and Standards. for. Screw Machining--Level III

Duties and Standards. for. Screw Machining--Level III Duties and Standards for Screw Machining--Level III Single-and Multiple-Spindle Automatic Bar and Chucking Machines Approved by The National Institute for Metalworking Skills, Inc. October 1996 Prepared

More information

14 AWG 2 AWG: 600 Volt

14 AWG 2 AWG: 600 Volt INDUSTRIAL AUTOMATION & PROCESS CONTROL CABLES 18.70 600V Type MC Metal Clad and Teck-Style Cables Overview Metal Clad Interlocked PVC Outer Jacket Teck-Style PVC Outer Jacket Introduction Polyester Wrap

More information

Operational Intelligence to deliver Smart Solutions

Operational Intelligence to deliver Smart Solutions Operational Intelligence to deliver Smart Solutions Presented by John de Koning Shell Global Solutions DEFINITIONS AND CAUTIONARY NOTE Reserves: Our use of the term reserves in this presentation means

More information

CZECH ECONOMY. In 2016 and 1H2017. Section of Industry Economic Analyses Department. Czech Economy

CZECH ECONOMY. In 2016 and 1H2017. Section of Industry Economic Analyses Department. Czech Economy CZECH ECONOMY In 2016 and 1H2017 Gross Domestic Product (constant prices, seasonally adjusted, y-o-y change, in %) 8 6 4 2 0-2 -4-6 -8 I/08 I/09 I/10 I/11 I/12 I/13 I/14 I/15 I/16 I/17 EA19 Germany USA

More information

Non-woven. Bonding systems in non-woven. Discussion. Needled felts Adhesives Heat bonding Stitch bonding

Non-woven. Bonding systems in non-woven. Discussion. Needled felts Adhesives Heat bonding Stitch bonding Non Woven Fabric (2) Dr. Jimmy Lam Institute of Textiles & Clothing Non-woven Bonding systems in non-woven Needled felts Adhesives Heat bonding Stitch bonding Discussion Introduction In last section, we

More information

ANNEX 4B: ORIGINATING GOODS REFERRED TO IN ARTICLE 4.3

ANNEX 4B: ORIGINATING GOODS REFERRED TO IN ARTICLE 4.3 ANNEX 4B: ORIGINATING GOODS REFERRED TO IN ARTICLE 4.3 Section 1: Table of Goods (in HS Code) Chapter 12 Oil Seeds and Oleaginous Fruits; Miscellaneous Grains, Seeds and Fruit; Industrial or Medicinal

More information

Makrolon Solid Polycarbonate Sheets

Makrolon Solid Polycarbonate Sheets 1. General remarks Tools sheets can be machined using the standard tools commonly used for metal and woodworking. We recommend carbide-tipped tools. Above all, it is important to use sharp cutting tools

More information

Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking

Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking A Technical data Special PVC control cables, adapted to DINVDE0 part3 Temperature range flexing -5 C ) to +0 C fixed installation

More information

BUREAU OF INDIAN STANDARDS. Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION

BUREAU OF INDIAN STANDARDS. Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION FOR BIS USE ONLY DOC:CHD 20 (1932)C December 2012 BUREAU OF INDIAN STANDARDS Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION (Not

More information