MEGANT 60. Mounting instructions. Concealed installation. Regular sizes overview ALU AW MEGANT 310x60x40 (Art.No. K242)
|
|
- Amice Carr
- 5 years ago
- Views:
Transcription
1 /Column: M Concealed installation 9. SK x2 in joist 2 3 /joist:.sk x2 = 3 20 Regular sizes overview - top LU W 0 - top F2,d MEGNT 30xx (rt.no. K242). SK x2 SK x in main beam SK x2 SK x2 This drawing is the exclusive property of KNPP GmbH SK x2 in joist SK x in main beam MEGNT xx (rt.no. K2) 20 = 36. SK x2. SK x2 Main beam Secondary beam glued log Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page /
2 This drawing is the exclusive property of KNPP GmbH 20 9 SK x in main beam Concealed installation /Column: /joist: /Column: SK x2 in joist SK x2 in joist. SK x = MEGNT 20xx (rt.no. K2). SK x2 0 0 SK x 9 in main beam Regular sizes overview LU W /joist: MEGNT xx (rt.no. K2-customer size). SK x2 30 =. SK x2 MEGNT sizes (LU W 0) Pos No. rt. No. part description 30xx xx 20xx xx rt. No. K242 rt. No. K2 rt. No. K2 rt. No. K2 So K200-K202 connector plates 20xx20 36xx20 xx20 xx20 2 K20 clamping jaws top 0xx; D20 xx; D20 xx; D20 0xx; D20 3 K20 clamping jaws bottom 0xx; M20 xx; M20 xx; D20 0xx; D20 4 Z924/Length threaded rod xm20x3 xm20x43 xm20x0 xm20x0 Z6 washer xm20 xm20 xm20 xm20 6 Z66 nut xm20 xm20 xm20 xm20 Z inclined screws 6x SKx 24x SKx 32x SKx 32x SKx Z horizontal screws 2x SKx 2x SKx 2x SKx 2x SKx. Z62 horizontal screws 2x SKx2 2x SKx2 2x SKx2 2x SKx Z Z62 screws clamping jaw 2x SKx 2x SKx2 2x SKx 2x SKx2 2x SKx 2x SKx2 2x SKx 2x SKx2 Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page 2/
3 Hole pattern for concealed central installation Pre-drill layout in main beam! LU W 0 This drawing is the exclusive property of KNPP GmbH HN a a Softwood: mm, depth 30 mm Hardwood: 6mm, depth screwlength ~20 mm Drilling positions for centered mounting in secondary beam! Softwood: mm, depth 30 mm Hardwood: 6mm, depth screwlength ~20 mm Housing depth mm Pre-drilling concealed installation of connector Secondary Pre-drill spacing a with respect to secondary beam beam member heigth H N [mm] Heigth MEGNT MEGNT MEGNT MEGNT H N [mm] 30x x 20x x Distance MEGNT MEGNT MEGNT MEGNT 30x x 20x x [mm] [mm] 6 Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page 3/
4 upper edge (OK) = main beam = OK secondary beam pre-drilling with jig.) Marking 2.) Place jig LU W 0 a mark center line and distance line a a HH place jig on center line and distance line use nails to secure positioning 3.) Pre-drill This drawing is the exclusive property of KNPP GmbH a Softwood: ø mm, depth 30 mm Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page 4/
5 .) Install MEGNT concealed on main beam LU W 0 plate marks up for main beam install place horizontal screws connector plate 2.) Inclined screws in connector plate 2. Start screwing from top down. Use max. 20Nm torque setting. Mount connector plate firmly This drawing is the exclusive property of KNPP GmbH 3.) 9 For hardwood main beam SK x20 screws are usually used. Clamping jaws 2 mounted at bottom. Use clamping jaw screws 9 for installation Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page /
6 pre-drilling with jig LU W 0.) Marking 2.) Place jig a mark center line and distance line a a HN place jig on center line and distance line use nails to secure positioning N/2 N 3.) Pre-drill N/2 N This drawing is the exclusive property of KNPP GmbH a N/2 N Softwood: mm, depth 30 mm Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page 6/
7 Install MEGNT concealed on secondary beam LU W 0.) plate markings up for secondary beam install horizontal screws. SK x2 connector plate. 2.) This drawing is the exclusive property of KNPP GmbH 3.) 9. clamping jaws 2 to be installed with clamping jaw screws 9. SKx2 at top of beam For hardwood secondary beam SK x20 screws are usually used. inclined screws to be installed from top down. Use max torque of 20Nm. Plate must sit firmly Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page /
8 . Install secondary beam Concealed installation LU W 0 2. Install M20 treaded rod 4 in lower clamping jaw 3 flush llen key SW M20 threaded rod with ISK SW M 20 ISK SW connector plate Threaded rod screwed in flush 3 Lower clamping jaw with internal M20 thread This drawing is the exclusive property of KNPP GmbH 3. Install clamping jaw, washer and M20 nut 6 Secondary beam x nut M20 x washer M20 * 30 OK *... ISK depth < 30 Glue the log into the milling slot 4. Tighten M20 nut with SW 30 wrench ( Nm)! Knapp GmbH. ll measures in mm - Errors excepted. VERSION Page /
Ready To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationHow To Build An. External Closed Staircase
How To Build An External Closed Staircase How To Build An External Staircase FOREWORD How to build a staircase explains the basic principles behind the construction and installation of external closed
More informationEuropean Technical Assessment. ETA-15/0667 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationUniversal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More and more companies are investing
More informationKai Installation Instructions
Kai Installation Instructions Before Beginning Installation Read through the entire instruction thoroughly A minimum of 2 people are required for this assembly These instructions reflect typical assemblies;
More informationChain Drive Vise. Installation Instructions. (revised 05/04/2016)
Chain Drive Vise Installation Instructions (revised 05/04/2016) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationINSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationSingle-point fixing serie S32/35
MNET Single-point fixing Single-point fixing serie S2/ The basic component within the MNET system is the single-point fixing a basic rather than cylindrical bore in the glass, has a tapered countersunk
More information2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
21 / 215 Vischer & Bolli Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationINS T A L L A TIO N INS T R U C TIO N S. Ceiling Mount Track System
Ceiling Mount Track System 10.26.2016 Specifications Ceiling Post: Unassembled 2-7/8 Assembled 1-11/16 7/8 7-9/16 5-7/8 3/8 2 Tubes 1/2 2-3/8 5 Parts and Tools Tools Needed Tape Measure Pencil Drill with
More informationGANTRY SYSTEM ASSEMBLY MANUAL
LOPRO GNTRY SYSTEM SSEMBLY MNUL The LoPro gantry bracket enables LoPro linear motion systems to be connected together to form gantry systems. The gantry bracket allows numerous gantry system configurations
More informationTectus TE 680 3D FD TECTUS TE 680 3D FD. The concealed hinge system for timber entrance doors
Tectus TE 680 3D FD TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 2 Tectus TE 680 3D FD Index TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 4 Sealing
More informationBig Sweep Lathe Dust Catcher System
Big Sweep Lathe Dust Catcher System Version.0 Disconnect saw from power source before fitting or removing insert. Ear Protection proper ear protection when working with machinery. Use caution when handling
More informationChain Drive Vise. Installation Instructions. (revised 11/29/2018)
Chain Drive Vise Installation Instructions (revised 11/29/2018) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: Ceiling mount for LC screens up to 29" Models: LCC 18, LCC 18-S, LCC 36, LCC 36-S Patent Pending Features: Comes in two adjustable height ranges (in 1" increments): 18"-30" and
More information5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
More informationInstallation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
More informationConnectors slot fasteners
Description Slot nut () The slot nut is directly adapted to the T-slot of the structural system. On the support beam, the slot nut may be entered into the T-slot from the beam side, thus making it very
More informationROBOT KR 350. Installation, Connection, Exchange. Ro/Me/03/ en. 1of 26
ROBOT KR 350 Installation, Connection, Exchange 1of 26 e Copyright KUKA Roboter GmbH This documentation or excerpts therefrom may not be reproduced or disclosed to third parties without the express permission
More informationTel: +44 (0)
4 Lindapter s support fixing range offers a series of ideal solutions for all building services. This includes the suspension of HVAC equipment, pipe work, fire protection/sprinkler systems, suspended
More informationRemoving the Z-Axis lead screw
Page 1 of 8 TITLE: Sabre Z-Axis Lead Screw Replacement Procedure Gerber FastFact #: 5048 Supplied by: Gerber Hardware Support Last Modified: June 14, 2007 Summary: Tools used: The following procedure explains
More informationMACHINE INSTALLATION MANUAL KINESIS STATIONS CORE MH650E EQUIPMENT NECESSARY FOR THE INSTALLATION
1 10/11/2011 MACHINE INSTALLATION MANUAL KINESIS STATIONS CORE MH650E EQUIPMENT NECESSARY FOR THE INSTALLATION - Wrenches T 5-6-8 socket wrench/open end wrench 17 knives Electric Phillips-head screwdriver
More informationInstallation and Assembly: Projector Enclosure
Installation and ssembly: Projector Enclosure Models: PE 1120, PE 1120-W 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307 or (708) 865-8870 Fax: (708) 865-2941 www.peerlessmounts.com ISSUED: 07-11-06
More informationINSTALLATION GUIDE Ceiling TV Mount MHP-52
ISTLLTIO GUIDE Ceiling TV Mount MHP-52 Max Load Capacity: 125 lbs (57kg) ote: Read entire instruction sheet before you start installation and assembly. Be sure to read this entire manual thoroughly and
More informationShop-Made Miter Clamps
*Editor s note: In the photos showing the table saw, the blade guard has been removed for clarity. I try to be as self-sufficient as possible, so I like to manufacture my own tools whenever I can. I designed
More informationSapper XYZ Monitor Arm Installation Instructions
9/5/2012 Sapper XYZ Monitor rm Installation Instructions 5900800 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower to upper jaw 5/32 () lamp
More informationIN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.
Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.
More informationPneumatic Clamp Carrier. Installation & Operation Manual
Pneumatic Clamp Carrier Installation & Operation Manual Pneumatic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
More informationSwifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
More informationSystem FS Duo Mounting Instruction. 1 General 2. 2 Pile driving 3. 3 Mounting the individual assembly groups 4. 4 Torque specifications 7
System FS Duo Mounting instructions CONTENTS Page 1 General 2 2 Pile driving 3 3 Mounting the individual assembly groups 4 4 Torque specifications 7 5 Module mounting 8 6 Tolerances 8 1 / 8 1 General 1.1
More informationMANET. Technical manual for ordering and installation. Single-point fixings for interior applications
MNET Technical manual for ordering and installation Single-point fixings for interior applications DORM MNET Glass design system MNET ONEPT MNET OMPT Sets Today s approach to office design tends to be
More informationINDEX > CH.5 HANGING SUPPORTS TENTI SHELF SUPPORTS TENTI TENTI TENTI - 4C... TENTI TENTI TENTI TENTI
> C.5 ANGING SUPPORTS INDEX SELF SUPPORTS 1-3... 305 2-4... 306 3-4C... 307 4-5... 308 5-7... 309 6-8... 310 7-9... 311 305 > C.5 ANGING SUPPORTS Maximum loads for shelf supports The test levels that shelf
More informationOVERVIEW You are installing 2 Major components: SITE PREP Remove organics
OVERVIEW You are installing 2 Major components: Dimensionally stable exterior frame with pre-drilled thread-bar holes. High yield thread-bar in a predetermined grid pattern (slab) and a heavy concentration
More informationCONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
More informationTWL 1500 TORQUE WRENCH LOADER
TWL 1500 TORQUE WRENCH LOADER OPERATOR S HANDBOOK (PART NUMBER 60246.1) CONTENTS PAGE 1 OF 8 INTRODUCTION 2 SPECIFICATION 3 ITEMS SUPPLIED 3 AVAILABLE OPTIONS 3 ASSEMBLY INSTRUCTIONS A. ASSEMBLY OF TRANSDUCER
More informationInstruction Sheet For: SCM-2
Instruction Sheet For: SCM-2 For more information, please contact us at: 345 Log Canoe Circle, Stevensville, Maryland 2666 Toll Free: 877.28.269 Phone: 40.643.6390 Fax: 40.643.665 www.videomount.com 27
More informationEZ-Level Quick Reference
EZ-Level Quick Reference 1) If you do not have a Self Leveling Laser Level: Mark your Base Line onto the wall 34-5/8 from finish floor. (highest point on floor). See our video: How to install base cabinets
More informationPneumatic Clamp Carrier. Installation & Operation Manual
Pneumatic Clamp Carrier Installation & Operation Manual Pneumatic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
More informationDewalt Organizer Storage Cabinet Plans
Dewalt Organizer Storage Cabinet Plans Version 1.0 How to build a system to perfectly organize you Dewalt storage organizers. With easy to follow step-by-step instructions, you will be able to cut, assemble,
More informationMaking Cam Action Edge Clamps, version 2 *
Making Cam Action Edge Clamps, version 2 * By R. G. Sparber 01/15/2008 Copyleft protects this article. The idea of making these clamps came from Brian Lamb. They work great. If you have more money than
More informationInstallation and Assembly Manual: Vector Pro II
Installation and ssembly Manual: Vector Pro II Models: PJF2-UNV, PJF2-UNV-S R This product is intended for use with U isted products and must be installed by a qualified professional installer. Maximum
More informationSupport systems Assembling instruction
Support systems Support systems Light-duty Installation instruction for support systems of wire-mesh cable trays and cable trays attached directly to concrete. 1 Wall mounting with bracket KWLL To install
More informationButt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
More informationMaking Simple Bookbinding Equipment
Tony Firman 20 1 2 19 Notes Tony Firman Tony Firman Bookbinding 18 3 : 2012 Tony Firman Bookbinding P.O. Box 507 Haslet, TX 76052 www.tonyfirmanbookbinding.com 4. When all the tapes have been pinned in
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationDorian Triple and Quad Instructions Installation Instructions
Installation Instructions www.ergomart.com 888 40 00 STEP UNPACKING... Page STEP COLUMN... Page 7 STEP MOUNTS Free Standing Base... Page 4 Clamp Mount... Page 5 Thru Mount... Page 6 STEP 4 WORK SURFACE...
More informationNEC Display Solutions of America, Inc.
NEC Display Solutions of merica, Inc. Installation and ssembly Manual: Custom Ceiling Mount for NEC NP400, NP500, NP500W, and NP600 Projectors Model: NP600CM Maximum Load Capacity: 50 lb (22.7 kg) Features:
More informationProcedure for Longworth Chuck construction
Procedure for Longworth Chuck construction Overall construction The Longworth chuck is composed of three major components. Connected to the lathe spindle is some device that fastens to the first of two
More informationBEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationWallbeds Northwest ENDURA CABINET PLANS AND INSTRUCTIONS
Thank you for purchasing your Wall Bed from Wallbeds Northwest. If you have purchased a complete "Endura DIY Kit," then much of the work is already done for you. Please skip to assembly instructions. Note
More informationGENMITSU CNC ROUTER 3018 USER MANUAL
GENMITSU CNC ROUTER 308 USER MANUAL Part : Package List Name Size Picture Qty Aluminum 220mm 360mm 330mm Mesa 2 5 2 Corner connector Slide nut Axis support base Linear axis Lead screw 2028 20M5 30M5 SK0
More informationYardistry. External Display YP *Time required for assembly approximately 1.5-2hrs
Yardistry External Display YP40030 *Time required for assembly approximately 1.5-2hrs Components 4 Packages of Panel Clips (Includes 6 Panel Clips and Hardware) 3 16 1/2 x 16 1/2 Signs (hardware Included)
More informationCongratulations! You are now on your way to enriching your life with! Figure #5. Step 5 Install the Dummy Deadbolt. Step 3 Drill the Door
C) Using the base point as your reference, measure up 8-1/32 and mark a horizontal line. Measure in from the edge of the door the distance of your backset and mark where the two lines cross. This will
More informationThis Folding Shelf Kit will work in conjunction with our Swing Away Carrier Kit allowing you add additional exterior storage space to your Vanagon.
Rocky Mountain Westy Folding Shelf Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Folding Shelf Kit. We pride ourselves in the products we develop
More informationParts List D E. Installation and Assembly- Encore Projector Mount Protected by U.S. Patent No. 6,042,068. Model: PJRL411
nstallation and ssembly- ncore Projector Mount Protected by U.S. Patent No. 6,042,068 Model: PRL4 MPORTNT! Read entire instruction sheet before you start installation and assembly. WRNN! nstaller must
More informationAdjustable Hammered Dulcimer Stand
Adjustable Hammered Dulcimer Stand Musicmaker s Kits (Hwy 36 behind Joseph s Restaurant) P.O. Box 2117 Stillwater MN 55082 651 439 9120 www.harpkit.com PARTS LIST: 1 Set of Assembly Instructions A. 2 front
More informationQuick-Release Sliding Tail Vise 05G30.01
Quick-Release Sliding Tail Vise 05G30.01 U.S. Des. Pat. No. D671,812 U.S. Pat. No. 9,050,710 Introduction The Veritas Quick-Release Sliding Tail Vise is a reworked version of the well-known tail vise that
More informationALL SEASON PATIO COVER
ALL SEASON PATIO COVER 61 Where the All Season Patio Cover is to be attached to the home, create a level line showing where the top of the mounting rail is to be located. Install each section with the
More informationFlat Panel Mobile Cart and Accessories
INSTALLATION MANUAL Flat Panel Mobile Cart and Accessories Optional Accessories TCH01 TDV01 TLP01 TCR01 Note: The accessories are not standard. The accessories will be selected according to user requirement.
More informationMODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS
MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Designed to work exclusively with the
More informationLab Style Table Frame Part No Assembly Guide Automation Technology
Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...
More informationCall (770) STEP 6: Caulk bolt hole within the bracket for protection from the elements.
Call (770) 777 7007 Structural Deck Support System: Product Numbers: H1-GQ, H2-GCL (Also applies to H1-GK and H2-GCR) STEP 1: Following the spacing guidelines per the deck design and joist layout, mark
More informationINSTALLING INVISIRAIL GLASS PANELS POST INFORMATION... 2 PRE-INSTALLATION... 2
Contents POST INFORMATION... 2 PRE-INSTALLATION... 2 STEP A1: MEASURING FOR INVISIRAIL CUSTOM GLASS PANELS (skip if using Standard Sized Panels)... 2 STEP A2: GATHER ADDITIONAL TOOLS/SUPPLIES... 2 STEP
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationT-Slot Clamps Rotagrip Ltd Tel Website
T-Slot Clamps 12150 Body: heat treated steel. Clamp: brass. Packed in pairs. For use in T-slots of machine tables. For replacement clamping screws see 12112. Hex. key not included. Order No. Slot size
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationSapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
More information7x --Tailstock Cam Lock
7x --Tailstock Cam Lock By Magic Brian magicbrian40@yahoo.com Probably the most pleasing mod to have, but often not done through lack of milling facility s This version does NOT require a mill. MATERIALS
More informationEZ-Level Quick Reference
EZ-Level Quick Reference 1) If you do not have a Self-Leveling Laser Level: Mark your Base Line onto the wall 34-5/8 from finish floor. (highest point on floor). See our video: How to install base cabinets
More informationA Metal Polishing Jig. By Norm Berls
A Metal Polishing Jig By Norm Berls Why make a metal polishing jig Objective: polish small steel parts to a mirror-like finish. Silicon Carbide abrasive paper works well under certain conditions. Paper
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationHandle Hardware Kit for Router Plane 05P38.10
Handle Hardware Kit for Router Plane 05P38.10 Introduction With this kit, you can make a set of replacement handles for the Veritas Router Plane. The following instructions describe how to make one handle
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationIn the box: Figure 1: Instructions, 1-channel, 2 retainers, 2 adjustable tubes, 1 chrome ring, and hardware. Channel
1 P a g e Thunder Mounts Garage Systems The Overhead Garage Mount Solution The World s Leader of Multi-fit Overhead Garage Mount Safety and Technology. Overhead Garage Door Opener Mounting Instructions.
More informationAssembly Instructions
Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt
More informationFront Vise 70G G08.02
Front Vise 70G08.01 70G08.02 The following instructions guide you through the installation of either the Regular Front Vise (70G08.01) or the Large Front Vise (70G08.02). The first step is to determine
More informationINSTRUCTIONS FOR ASSEMBLING YOUR CLEARMOUNT MITER SAW SCALE
INSTRUCTIONS FOR ASSEMBLING YOUR CLEARMOUNT MITER SAW SCALE Pictures shown are our SW7 but these instructions apply to all of our scales. Special information for other models is noted. ** Read & Follow
More informationED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
More informationOverview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools
8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,
More informationSapper XYZ Crossbar Monitor Arm Installation Instructions
02/13/2015 Sapper XYZ rossbar Monitor rm Installation Instructions 59046 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower to upper jaw 5/32
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationPIFOC QuickLock Thread Adapter
PIFOC QuickLock Thread Adapter Installation instructions Contents Introduction... 2 Design... 2 P-721.xxQ PIFOC QuickLock Thread Adapter... 2 Component Overview... 3 Assembly... 4 Demounting... 4 P-721.xxA
More informationStraight Stringer Installation Instructions
Straight Stringer Installation Instructions Floor-to-Wall Installation F L I G H T P L A N Unpack: What s included? Your Stringer Tread Screws (8) per tread (1) Torque Wrench (1) Socket (for the brackets
More informationHinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74
Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it
More informationModel POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist
Assembly and Installation Manual Projector Bracket Model POA-CHB-XL50 Be sure to consult with a qualified installation specialist This bracket is specifically for use with our projector. Be especially
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationFan Back Adirondack Chair Assembly Instructions How To Assemble Your Chair in 12 Easy Steps Parts List 5 9
Fan Back How To Assemble Your Chair in 12 Easy Steps Parts List 5 9 5 5 9 5 5 1 12 11 7 7 1 8 13 10 2 6 4 3 3 3 3 3 2 #1 (2) frame, left & right #2 (2) 20" legs, left & right #3 (6) 20" seat slats #4 (1)
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationDEHN + SÖHNE. DEHNiso Distance Holder: The Modular Lightning Protection System.
DEHN + SÖHNE DEHNiso Distance Holder: The Modular Lightning Protection System. Direct Lightning Strikes. The Protection System. The basic function of an external lightning protection system is to intercept
More informationFastening Technology. The Strong
100 The Strong Fastening Technology A few years ago connecting without drilling, milling or welding was almost unthinkable. It is obvious that if you can eliminate machining or welding from the process
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More information