P-System. NEW Tenso P-14 with preload clip. Inspiration.
|
|
- Samuel Osborne
- 5 years ago
- Views:
Transcription
1 P-System Inspiration NEW Tenso P-14 with preload clip Divario P-18 Tenso P-14 Clamex P-14
2 P-System Form-locking anchorage 10 mm without tools Fast installation Strong and form-locking Lateral tolerance in P-System groove Shallow cutting depth No twisting Clamex P Detachable connecting fitting Detachable Aesthetic High clamping force Stackable Versatile Tenso P with preload-clip Self-clamping fitting as gluing aid, for all angles Glueing Invisible High clamping force Versatile Lower assembly force Divario P Self-clamping, invisible fitting for slide insertion Sliding Insertion Invisible Clamped joint Fast installation Assemble by sliding
3 14 45 Clamex P Detachable connecting fitting Advantages and properties / Clamex P Aesthetic solution Differentiation to furniture standards Stackable with pre-installed fittings Advantages in packaging, transport and logistics Freedom of choice during assembly Detachable or glued construction a. b mm 16 mm 18 mm mm 18 mm mm mm Technical data Size mm Cutter...Ø x 7 x 22 7 Material of connector...fibreglass reinforced...plastic Ø Material of lever...zinc die cast 9.8 Installation tolerance...longitudinal ± 1 mm
4 Applications / Clamex P Aesthetic, detachable connection for the highest demands
5 Applications / Clamex P Short installation time thanks to pre-installed joining elements Adjust the size of individual parts on site Compact shipment volume due to delivery in parts
6 Applications / Clamex P Work pieces can immediately moved to storage or stacked Consistent use of identical system for all connection situations and angles Consistent connection quality when parts are assembled and disassembled multiple times Fast, perfect clamping on site
7 45 Tenso P Self-clamping fitting as glueing aid, for all angles Advantages and properties / Tenso P Usage as glueing aid High clamping force Perfectly aesthetic Completely invisible with preload Clip Lower assembly force in all angles NEW with preload clip a. b mm 16 mm 18 mm mm 18 mm mm mm Technical data Size mm Cutter...Ø x 7 x 22 7 Material...fibreglass reinforced...plastic Ø Installation tolerance...longitudinal ± 1 mm 9.8
8 Applications / Tenso P 108 Fast glueing in any situation, without the need for additional clamping elements
9 Applications / Tenso P No risk of damage to painted work pieces by clamps Parts are perfectly glued, even in difficult-to-reach areas No need to wait for the adhesive to set
10 Applications / Tenso P Compact shipment volume as parts are glued on site Parts can be glued without an additional aligning element (e.g. dowels) Fast, easy gleuing without the need for additional glueing aids
11 Divario P Self-clamping, invisible fitting for slide insertion Advantages and properties / Divario P Completely invisible joint For highest quality standards Perfectly closed joints Joins and clamps during insertion Efficient machining and installation With a CNC or a Zeta based on the P-System Insertion of shelves after transport Lower transport weight NEW mm 9.8 Technical data Size mm 18 Cutter...Ø x 7 x 22 7 Material...fibreglass reinforced...plastic 10 Installation tolerance...longitudinal ± 1 mm 8
12 Applications / Divario P 18 Joins and clamps during insertion
13 Applications / Divario P Completely invisible joint to meet the highest quality standards Insertion of shelves or dividers after transport allows for a lower transport weight hülsta, D Stadtlohn hülsta, D Stadtlohn Addition of shelves into existing furniture after transport
14 Applications / Divario P Delivery in parts (flatpack) Assembly of the furniture on site Installation of shelves without glue or clamping aids
15 How it works / Zeta P2 Zeta P2 The machine for the evolving P-System, saving you time daily! Differentiate your products from the standard! 1a. setting 1b. Mitre setting Exceptionally fast joining method with a power tool. Make any corner joint in less than 2 minutes! 2. Cut groove 3. Dril hole (6mm) 0:30 1:05 1:35 1:45 VMD = Vertical Mechanical Drive Exterior flush mitre joints 5. Inserting 6. Connect, finished!
16 Applications / CNC machines CNC machines Machines Axes Fitting (see CNC tool overview Surface 180 on page 37 in the catalogue at en/home/service/ media-center.html) Corner Centre wall Mitre What setup do I need if I want to create Portal 3/4 P-System grooves with my CNC machine? 4 1. CNC machine Manually adjustable swivelling aggregates 5 2. CNC software / macro / component from the manufacturer Nesting 3/4 3. Suitable angle aggregate 5 4. P-System cutting tool Aggregate Possible Only possible with Zeta P2 and positioning pins Possible with shaft tool Angle aggregate Automatically adjustable swivelling aggregates Tip: Instead of using an angle aggregate, the Zeta P2 power tool can be used to cut the P-System groove in the centre of the surface. To do so, drill two 5 mm positioning holes spaced at 101 mm in the work piece surface using the CNC machine. These are required to align the Zeta P2 R50.20 on the work piece. 14 Not possible (Flex 5+C, from manufacturing year 2015)
17 Manufacturer: Lamello AG Joining technology Hauptstrasse 149 CH-4416 Bubendorf Tel Fax Art.No DEEN P-System Inspiration DE/EN 01 / 2016
P-System. Quotes. The P-System elements family continues to. Save time daily Differentiate your product
Quotes Urs Fehlmann, Production Manager HERZOG Küchen AG, Unterhörstetten TG «What impresses me most apart from its cost effectiveness is the enormous tensile strength of Clamex P.» «We use Clamex P as
More informationNEWS. Cabineo. Tips & tricks. Zeta P2. Request a free Zeta P2 demonstration lamello.com. Saving time in production
NEWS 01 2018 Request a free Zeta P2 demonstration lamello.com Cabineo Saving time in production Tips & tricks Gluing drawers efficiently with the Tenso Zeta P2 Fastest joining system with a power tool
More informationCatalogue 2015 / english. Pioneering wood joining. simple ingenuity
Catalogue 2015 / 2016 english Pioneering wood joining simple ingenuity Intelligent and innovative design with a significant impact! We strive for new solutions in wood joining and processing technology
More informationCatalog. english 2018 / Pioneering wood joining simple ingenuity
Catalog 2018 / 2019 english Pioneering wood joining simple ingenuity 1 A strong connection. Inspiring. High-end system solutions. Lamello s exciting and successful history started when the company was
More informationClassic C3. Lamello System. Advantages and features. Joining. Technical data. Kit contains
Classic C3 Lamello System The original biscuit joiner that is affordable for every workshop. Choose Lamello for precision, reliability, longevity and many other benefits. Long-life precision guidance CNC
More informationProcessing Centers. Venture 21/23
Processing Centers Venture 21/23 Venture 21 and Venture 23 Alongside versatile routing functions, the compact Venture 21 and Venture 23 processing centers offer a range of unique additional functions:
More informationDrill Press Storage Cart
Drill Press Storage Cart Richard Hicks on July 22, 2013 Drill Press Storage Cart Drill Press Storage Cart My Inspiration ShopNotes Issue 128 Changes Used casters instead of wheels Didn t build the drill
More informationConnections with profile
Connections with profile simple ingenuity Catalogue english 2011 / 2012 Lamello products are used by commercial and industrial customers. Interior fitting Furniture and kitchen Manufacturing Shop fitting
More informationTanga DX200. The light-weight power pack for the clean removal of windows NEW. 1700W, 70mm cutting detph, reduced weight
Tanga DX200 The light-weight power pack for the clean removal of windows NEW 1700W, 70mm cutting detph, reduced weight No damage to the reveal with the Tanga DX200: - Clean separation of the old window
More informationDowelling joints with VS 600
No. 112 Dowelling joints with VS 600 A Description Dowelling joints with round dowels (in addition to flat dowels) are part of the standard wood joints in furniture manufacture. This joint is very stable.
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationAt last a system that joins everything.
Unique! At last a system that joins everything. More versatile, more stable, faster: the new DOMINO jointing system. No Compromises! The DOMINO jointing system. Every system has its advantages... Round
More informationAt last a system that joins everything.
Unique! At last a system that joins everything. More versatile, more stable, faster: the new DOMINO jointing system. No Compromises! The DOMINO jointing system. Every system has its advantages... Round
More informationwww.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles
More informationdrilling solutions morbidelli cx100 flexible drilling centre
drilling solutions morbidelli cx100 flexible drilling centre morbidelli cx100 compact technology in only 8 m 2 The high performance compact vertical work centre, with maximum drilling ability in a small
More informationPIN Systems by Connect
PIN Systems by Connect PIN System delivers a secure, elegant and clean alternative to your fixing requirements that can be incorporated into any design. The modular system has a variety of sizes and styles
More informationCopyright WilkerDos.com Dining Table. Project Designed By April Wilkerson - Plan Created By Jay Bates (jayscustomcreations.
Copyright WilkerDos.com 2017 Project Designed By April Wilkerson - Plan Created By Jay Bates (jayscustomcreations.com) Layout & Shopping List Page 2 of 12 Layout & Shopping List Item Quantity Description
More informationFramework joints FABRICATION - WOOD JOINTS. Corner joints. Tee joints. Worksheet 15a. Cable Educational Ltd
FABRICATION - WOOD JOINTS The word: fabricate means to join together. Most wooden products are held together with adhesive. Adhesive works very well when the edge of a piece of wood is being glued to the
More informationPro-Doweling Kit USER S MANUAL #840. Visit us at
Pro-Doweling Kit USER S MANUAL #840 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Please read this manual carefully and thoroughly
More informationSide Light Frame Pack Assembly Instructions
Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow the step by step guide. IDENTIFY THE PACK CONTENTS
More informationcyflex s flexible drilling centre
cyflex s flexible drilling centre cyflex s compact technology in only 8 m 2 The high performance compact vertical work centre, with maximum drilling ability in a small space: it can produce up to 400 pieces
More informationCDAS CDAS39 SHELF UNIT
BY CDAS CDAS39 SHELF UNIT 0708 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationSide Light Frame Pack Assembly Instructions
Side Light Frame Pack Assembly Instructions Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow
More informationPROJECT PLAN TOOL CHEST
BUILD IT WITH ROCKLER PROJECT PLAN TOOL CHEST FEATURING ROCKLER S BUILD QUESTIONS? Go to www.rockler.com or call 800-279-4441 Stock # Item 63420 1/4" x 24" x 30" Baltic Birch Plywood 63446 1/2" x 24" x
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationSemi-concealed dovetail joints
No. 100 Semi-concealed dovetail joints A Description The semi-concealed dovetail joint is a classic solid wood corner joint. It is suitable for joining wider slats, boards and solid wood panels. Semi-concealed
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationLW36 LAB WORKSTATION IMPORTANT!
BY LW36 LAB WORKSTATION 01/06 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
More informationA quick and easy way to make a hidden reinforced miter joint
A quick and easy way to make a hidden reinforced miter joint Text and photos by Jerry Work 2011 Carefully mitered corners add a touch of elegance to any square or rectangular piece. The problem is they
More information2-speed cordless impact drill 18,0 V PD 2G 18.0
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 2-speed cordless impact drill 8,0 V PD 2G 8.0 Order number 47.858 2-speed cordless impact drill 8,0 V + Electronic management system (EMS)
More informationPerfect Hinges. Pick the. for Your Boxes. Selecting just the right hinges to fit each special box can be a daunting task.
Pick the Perfect Hinges for Your Boxes The right choice will help you design and build better boxes by Doug Stowe Selecting just the right hinges to fit each special box can be a daunting task. There are
More informationMETAL BENDER OPERATING & MAINTENANCE INSTRUCTIONS Model Nos: CCB1 & CCB2 Part Nos: & CCB2 CCB1
METAL BENDER Model Nos: CCB1 & CCB2 Part Nos: 7630073 & 7630074 CCB2 CCB1 OPERATING & MAINTENANCE INSTRUCTIONS 1206 1 The Compact Bender allows you to economically make a variety of bends in flat, square,
More information2-speed cordless drill driver 18,0 V. DD 2G 18.0-EC/2.5 Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 2-speed cordless drill driver 8,0 V DD 2G 8.0-EC/2.5 Set Order number 46.733 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah Max soft/hard
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationFor Barrel Tapers. Installation and Operating Instructions For use with small combination belt & disk sanders. Assembled Taper Tool
Tim s Taper Tool For Barrel Tapers Installation and Operating Instructions For use with small combination belt & disk sanders Assembled Taper Tool Your taper tool is capable of making barrel tapered shafts.
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationBUILDING A STORM DOOR
BUILDING A STORM DOOR BY NEAL BARRETT Illustrations by George Retseck If you're in the market for a storm door, you probably know that there are many styles and models available. However, most of them
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More informationCommercial Wine & Liquor Display. Double Displays
Commercial Wine & Liquor Display Double Displays Congratulations! You have purchased a superior commercial wine rack kit. These commercial kits have been specifically designed to properly store and display
More information135 ROLLTOP DESK 515
135 ROLLTOP DESK 515 For the person who hates to clear off a desk, who wants to leave everything where it is overnight yet still have the clutter hidden, a rolltop desk is a godsend. The tambour hides
More informationAssembly Instructions
Selling Station Assembly Instructions View from above without top A B C D Rounded finished corners on A & D Square unfinished 3-sides on B & C Selling Station Components (2) 2' x 6' Side s Have a channel
More informationCOACT MEDIA UNIT ASSEMBLY WITH X9 OPEN SHELF STORAGE OPTION PART # INSTALLATION INSTRUCTIONS
PART # 1609103 MEDIA UNIT ASSEMBLY WITH X9 OPEN SHELF STORAGE OPTION 1. Begin by placing the back panel on a flat non-marring surface, making sure the pre-drilled holes are facing up. Next, position the
More informationHM OUTDOOR TABLE:HM OUTDOOR TABLE 25/7/08 11:18 AM Page 30
HM080827 OUTDOOR TABLE:HM080827 OUTDOOR TABLE 25/7/08 11:18 AM Page 30 The treated-pine frames of the table and benches are topped with sturdy blackbutt timber. HM080827 OUTDOOR TABLE:HM080827 OUTDOOR
More informationTeacherGeek Sumo Bot Vehicle Application Guide
SUMO BOT VEHICLE EXAMPLE BUILD TeacherGeek Sumo Bot Vehicle Application Guide TeacherGeek, 011 SUMO BOT VEHICLE EXAMPLE BUILD TeacherGeek TeacherGeek s Sumo Bot Vehicle Activity is the perfect way to encourage
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TOOLS REQUIRED Rechargeable, variable speed drill 3/8 diameter drill bit 3 Robertson bits #0, #1 and #2 Slot screwdriver Non marring hammer with 1 head Level Caulk or sealant
More informationBEAST THE. Tube and Pipe Notcher Operating Instructions. Notches In Bends Straight Notches. Angled Notches. Offset Notches
Copyright (c) 2007 J D SQUARED INC. www.jd2.com THE BEAST Tube and Pipe Notcher Operating Instructions Notches In Bends Straight Notches Angled Notches PATENT PENDING Offset Notches Assembly After unpacking
More informationCMT Enlock Jig Owner s Manual
Thank you for purchasing the CMT Enlock Jig. This jig will simplify joinery in your shop, and on the job site. Please read the instructions thoroughly before using the Enlock Jig. Router requirements A
More informationConnecting technology Summary of ranges
Connecting technology Summary of ranges Lightweight connecting fittings Summary 758-759 Connecting fittings for carcases Summary 768-769 Other connecting fittings Summary 798-799 Adjustment systems for
More informationHinge Systems. Our technology adds movement and flexibility to furniture.
Our technology adds movement and flexibility to furniture. Hinge Systems Without the fitting, any item of furniture, no matter how attractive, fails to fulfill its purpose. This is the Hettich experience.
More informationDesigned for Vectric by Michael Tyler
Project Tutorial Compatible with: Featuring compatibility with nearly all CNC Machines Better Than Sliced Bread! Designed for Vectric by Michael Tyler It is our pleasure to provide our customers with fun
More informationPanel butt joint with the DOMINO
No. 543 Panel butt joint with the DOMINO A Description The DOMINO wood jointing system can be used easily and quickly to create frame and rack joints frequently required by joiners and carpenters. The
More informationMyOutdoorPlans.com. By Julian King [2X4 GARDEN BENCH]
MyOutdoorPlans.com By Julian King [2X4 GARDEN BENCH] CUT LIST A 2 pieces of 2 4 lumber 24 long, 2 pieces 32 1/2 long LEGS B 2 pieces of 2 4 lumber 45 long, 2 pieces 15 1/2 long, 1 piece 12 1/2 long SEAT
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationThe perfect connection. The DOMINO system user manual.
The perfect connection. The DOMINO system user manual. Two men. One napkin. And the origin of a brilliant idea: the DOMINO connecting system. There are now numerous draft designs, CAD drawings, parts lists
More informationWOOD GRAIN 6 SHELF BOOKCASE
HRDWRE 4 - wood dowels 20 - cam 8 - large 12 - shelf pins 4 - adhesive cam covers 20 - cams 8 - brackets Missing hardware? Please call 800.606.6387 for replacements. WLL MOUNTING HRDWRE 2 - small 2 - large
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationFA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions
FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com
More informationM4 Foot Operated Underpinner Instruction Manual
M4 Foot Operated Underpinner Instruction Manual M4 Walker Rd, Bardon Hill, Coalville, Leicestershire LE67 1TU, England Tel. +44 (0)130 1692, Fax +44 (0)130 16929 e mail sales@framerscorner.co.uk M4 Underpinner
More informationChain Drive Vise. Installation Instructions. (revised 05/04/2016)
Chain Drive Vise Installation Instructions (revised 05/04/2016) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationCode Description Qty. Material Dimensions A Long Inner 4 2 x 4 pine 34-1/2 long
B utler s Chest Because it s designed to suit a variety of purposes, this butler s chest is a piece of furniture that absolutely anyone can appreciate. Used by itself, it can serve as an end table or can
More informationDewalt Organizer Storage Cabinet Plans
Dewalt Organizer Storage Cabinet Plans Version 1.0 How to build a system to perfectly organize you Dewalt storage organizers. With easy to follow step-by-step instructions, you will be able to cut, assemble,
More informationWorld. Old. Dining Table YOU CAN BUILD AN
YOU CAN BUILD AN Old World Dining Table This design combines heavy oak timbers with period specific elements. The result brings an old world look to a modern sized dining table. Publisher: Jeff Branch
More informationDisplay Case (for J&S)
Display Case (for J&S) This is constructed of maple plywood with solid maple (soft maple) edge banding. It was made to fit between a door and a kitchen cabinet, and has an elegant circular taper between
More informationCopyright 1998 KDE Technologies
Modular Computer Corner Desk Unit Copyright 1998 KDE Technologies http://members.tripod.com/~kdetech/ 1. Introduction 2. Plans Sheet one - Isometric Sheet two - Top Detail / Corner Unit Sheet three - Leg
More informationQuality Traditional and Far Infrared Saunas
EURO SAUNA SET-UP GUIDE EURO SAUNA Quality Traditional and Far Infrared Saunas Far IR ThermoCabin Assembly Euro Sauna 13575 Lake Pine Road, Winfield, BC Canada V4V 1A3 Phone 1-888-999-3876 Fax 1-250-766-2994
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, without net brackets, in ground sockets
Assembly instruction Cat.-no.: 113 6526 Sport-Thieme Handball Goal 3x2 m, without net brackets, in ground sockets Thanks for choosing Sport-Thieme equipment! In order to enjoy this product please note
More informationInstructions for Lighting an S Scale Caboose
Instructions for Lighting an S Scale Caboose The S Scale Caboose lighting kit is adaptable for most caboose models of rolling stock including American Flyer (TM) and contains the same components as found
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationcyflex universal cnc boring centres.
0,0 0,2 0,4 0,6 0,8 1,0 cyflex universal cnc boring centres. Cat.SCM Gamma Cyflex_Ing.indd 2 21/03/13 11.11 scmcyflex Compact dimensions with high performance. cyflex f900 cyflex f900 universal cnc boring
More informationDUALCASE VERSATILE ALUMINIUM SIGN SYSTEM
VERSATILE ALUMINIUM SIGN SYSTEM Universal Components Ltd. May 2007 Introduction Nothing beats DualCase for speed of fabrication, aesthetic appearance and easy maintenance. With the minium of components
More informationThe Rowen Victorian Assembly Instructions By Laser Dollhouse Designs
The Rowen Victorian Assembly Instructions By Laser Dollhouse Designs Parts Listing 1. Four main floors A. Base Floor with markings S1 thru S6 B. 1 st Floor with markings 1A thru 1H C. 2 nd Floor with markings
More informationEnd Plate Alignment Pin 80-PIN Paint Mask 35-EXT Plexineon Mounted in Extrusion. Extrusion 75-EXT
Lighting Components 222-412 W End Plate Screw End Plate Alignment Pin Lever - Nuts Nylon Clip 80-SCR-10-00 80-MTPO1-001-00 80-PIN03-001-00 222-412 Wago 75-CLP32-001-00 24V Power Supply Strain Relief Paint
More informationMCH42 / MCH48 MODULAR SERIES 2400/3000 CORNER HUTCH
/ MODULAR SERIES 2400/3000 CORNER HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up
More informationSelekta Pro 2000 Fast assembly hinges for office and commercial furniture
Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment
More informationInstallation Guide. Focal Point Architectural Mouldings. Focal Point Architectural Mouldings
Installation Guide Focal Point Architectural Mouldings 6a Howards Road Beverley, South Australia 5009 Ph: 08 8244 7322 Contents Preface... 2 Moulding Application 1. Planning and Estimations... 3 2. Marking
More informationAFB (AIR FAN BEARING) INSTALLATION GUIDE
654 AFB (AIR FAN BEARING) INSTALLATION GUIDE AFB PARTS Bearing Housing - Secured together with two 3/8 x 1.25 in. Cap Screws Black Wiper Seals - Secured together with O-ring cord (Subsequently depicted
More informationBlackout Instructions. 4 R-Series Fascia Installation Outside Mount
Blackout Instructions 4 R-Series Fascia Installation Outside Mount 1 Components Needed page 3 Tools Needed page 4 System Diagram page 5 Instructions Step 1: Install Brackets. Page 6 Step 2: Mount Back
More informationLIBRARY SHELVING UNIT LS42SA LS48SA LS60SA LS72SA LS84SA SINGLE ADDER UNIT IMPORTANT!
BY LIBRARY SHLVING UNIT LS42SA LS48SA LS60SA LS72SA LS84SA SINGL ADDR UNIT 0907 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: RAD TH DIRTIONS all the way
More informationTongue & Groove Cabinet Doors Copyright 2014 JaysCustomCreations.com
Tongue & Groove Cabinet Doors Copyright 2014 JaysCustomCreations.com A tongue and groove cabinet door is made up of at least 5 pieces. Two horizontal rails (blue), two vertical styles (green), and one
More informationPristine Precise Perfection
Pristine Precise Perfection EB TY Premium Hidden Deck Fastening System For Premium Timber Deck Applications Stainless Steel Reinforced EB- GUIDE EB-TY Premium Hidden Deck-Fastening System Optimise Your
More informationZ14 MANUAL TÉCNICO TECHNICAL MANUAL
Z14 MANUAL TÉCNICO TECHNICAL MANUAL Z14 TECHNICAL INSTRUCTIONS CONTENTS: 1.- Opening the machine 2.- Changing the bridge 3.- Checking if cleaning and greasing is needed 4.- Puller runner bolts 5.- Tray
More informationBuild the Spitfire: Step-By-step. Pack 3 Stages 21-30
Pack Stages 2-0 Contents Stage Page Number 2 72-74 22 75-78 2 79-8 24 82-84 25 85-88 26 89-9 27 92-94 28 95-97 29 98-00 0 0-05 Editorial and design by Continuo Creative, 9-4 North Road, London N7 9DP All
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationProject: Smoker Overview: Smoking meat has been around for. Materials: 3/4 plywood, 7-48 of 1/2 dowel,
Project: Smoker Overview: Smoking meat has been around for hundreds of years. Now with this simple smoker one can bring back to life the ancient methods of preserving meats and adding the smoky flavor.
More informationrouter table sled 2012 August Home Publishing Co.
router table sled 2012 August Home Publishing Co. best-built jigs & fixtures router Table Sled Packed with features, this sled makes it easy to rout perfect-fitting joints. A router table is a great tool
More informationFlexFrame - Storage Components and Skins
FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General
More informationroom essentials >> assembly instructions Nightstand DCPI # (Black Woodgrain)
room essentials Nightstand DCPI # 249-05 - 0101 (Black Woodgrain) DCPI # 249-05 - 0104 (Espresso) DCPI # 249-05 - 0107 (Natural) DCPI # 249-05 - 0110 (White) >> assembly instructions 92331 F ROOM ESSENTIALS
More informationButt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
More informationAssembly and planning aids Range summary
Assembly and planning aids Range summary eservice tools and planning aids Summary 1116-1117 BlueMax automatic drilling and insertion machines Summary 1134-1135 Assembly aids and drilling jigs Summary 1154-1155
More informationDOCUMENT CHEST. Curly Maple, White Pine
25 DOCUMENT CHEST Curly Maple, White Pine 100 MAKING THE DOCUMENT CHEST After the stock has been thicknessed, ripped to width, and cut to length, plough a 1/4" X 3 /8" groove on the inside faces of the
More informationv1.0 ASSEMBLY GUIDE Edgar Tall Chest of Drawers
v1.0 ASSEMBLY GUIDE Edgar Tall Chest of Drawers Components Upon unpacking your tall chest of drawers from it s delivery box, you should have the separate pieces shown below. Follow the steps on the next
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationTrade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 5: Jigs and Fixtures Phase 2. Published by
Trade of Toolmaking Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 5: Jigs and Fixtures Phase 2 Published by SOLAS 2014 Unit 5 1 Table of Contents Document Release History... 3 Unit Objective...
More informationTRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS
is the concealed mounting bracket for shelves minimum 0mm thick. It has been conceived to simplify the shelf installation. It is provided with three indipendent adjustments: 1) VERTICAL Before installing
More informationBUTCHER BLOCK MICROWAVE OVEN STAND
BUTCHER BLOCK MICROWAVE OVEN STAND 828 The butcher block has fallen out of favor in recent years, replaced by the countertop cutting board in an attempt to save space. This design, however, makes the butcher
More information