NEWS. Cabineo. Tips & tricks. Zeta P2. Request a free Zeta P2 demonstration lamello.com. Saving time in production

Size: px

Start display at page:

Download "NEWS. Cabineo. Tips & tricks. Zeta P2. Request a free Zeta P2 demonstration lamello.com. Saving time in production"

Ophelia Lynch
5 years ago
Views:

1 NEWS Request a free Zeta P2 demonstration lamello.com Cabineo Saving time in production Tips & tricks Gluing drawers efficiently with the Tenso Zeta P2 Fastest joining system with a power tool

Cabineo: Impressive benefits From exclusive individual pieces to large production orders: NILO Schreinerei Küchenbau AG in Wettingen specialises in the development

The company now uses the new Cabineo with high clamping force from Lamello AG to connect all their cabinets.

Founded in 1906 by Josef Berz, the company was acquired by Nik Meier in 1982.

NILO AG is known for its passion for passion for cabinet making, combined with the latest technology.

magazine and went on to request a free information pack at www.cabineo.ch.

Munk, who served his apprenticeship with the company, explains that, the decision to comprehensively test the new product was a very quick one.

decided to change over to Cabineo, Munk smiles and says: There are several reasons: the stackability i.e. flat-pack delivery with preassembled connectors the ease

Quick and easy assembly One current order in Wettingen involves the production of more than 160 cupboards.

panels to size on the horizontal panel saw. The workpieces are then formatted and machined on one of the CNC machines available in the workshop.

The series hole drill can also make the 5mm hole for the Cabineo no change of tool is required.

The company uses the Cabineo 12 for corner connections, and the Cabineo 8 for dividing panels.

2 Cabineo: Impressive benefits From exclusive individual pieces to large production orders: NILO Schreinerei Küchenbau AG in Wettingen specialises in the development and manufacture of custom-made and series production furniture. The company now uses the new Cabineo with high clamping force from Lamello AG to connect all their cabinets. Cutting and drilling on any CNC machine No more edge-drilling Order an info pack for free cabineo.ch NILO AG in Wettingen has a long history. Founded in 1906 by Josef Berz, the company was acquired by Nik Meier in Currently the company has a workforce of 23, and specialises in interior fitting, fitted kitchens and door production. NILO AG is known for its passion for passion for cabinet making, combined with the latest technology. The firm has been working with the new Cabineo cabinet connector since 2017, after bench cabinet maker Roger Jakob came across the innovation in an industry magazine and went on to request a free information pack at A quick decision The product sample and flyer that he received convinced both him and production manager Matthias Munk. Munk, who served his apprenticeship with the company, explains that, the decision to comprehensively test the new product was a very quick one. The results convinced everyone involved in the production process, and since then they have used Cabineo for connecting all the cabinets they produce. In addressing why they decided to change over to Cabineo, Munk smiles and says: There are several reasons: the stackability i.e. flat-pack delivery with preassembled connectors the ease of assembly and time savings, getting rid of the need to open bags of hardware, and the high clamping force. Quick and easy assembly One current order in Wettingen involves the production of more than 160 cupboards. The first step is to cut One-piece connector without dowel Quick connector insertion Flat-pack delivery with preassembled connectors No bags of loose fittings panels to size on the horizontal panel saw. The workpieces are then formatted and machined on one of the CNC machines available in the workshop. This example shows the Homag BMG 511 in use. A 15 mm drill is used to make the three holes for the connector. The series hole drill can also make the 5mm hole for the Cabineo no change of tool is required. The Cabineo can then be very quickly inserted, by simply tapping it into the hole. The company uses the Cabineo 12 for corner connections, and the Cabineo 8 for dividing panels. Cabineo saves time During our discussion, Munk tells us Quick assembly without pre-fitting of dowels or screws Protruding screw aligns the connection perfectly Strong connection Cabineo Cabineo Starter Set, Cabineo (40 pcs eacht), incl. Cabineo hex bit and set of cover caps (40 pcs) Cabineo 8, for dividing panels, 500 pcs Cabineo 8, for dividing panels, 2000 pcs Cabineo 12, 500 pcs Cabineo 12, 2000 pcs Cabineo hex bit that before they changed over, cabinets were delivered fully assembled. Since the changeover to Cabineo, we have benefited by being able to assemble on-site and we are really happy with the time we save. Fitter Walter Rudolf confirmed that assembling the cupboard with Cabineo is much quicker and easier than with the cam. He goes on to say: The protruding screw means we can precisely align the machined furniture parts, and connecting them just needs a cordless drill. If the connector needs to be invisible which is standard at NILO AG cover caps are used. These can be fitted onto Cabineo in seconds, and Lamello AG offers them in various colours. Since introducing Cabineo, NILO AG has already used 2,500 connectors and is absolutely won over by the product. We have been using Lamello system solutions for some years, and are pleased to have such an innovative partner at our side, Munk tells us at the end of the tour

Save time with the Zeta P2 A cabinet put together in just 4

systainer 101402S 101402DS Clamex P-14 Tenso P-14 Divario P-18

is complete within minutes, without waiting time, clamps, or

using the Lamello P-System connector for more than 3 years.

Lamello provides the option of leasing a Zeta P2 biscuit joiner

key benefits of the P-System to be the precision, the

preload function Box of 300 pairs (without preload clip) Box of

pairs 145560 Tenso P-14 P-System Tenso P-14 gluing system with

3 Save time with the Zeta P2 A cabinet put together in just 4 minutes Request a free Zeta P2 demonstration lamello.com Zeta P2 with carbide tipped profile groove cutter in systainer with diamond tipped profile groove cutter in systainer S DS Clamex P-14 Tenso P-14 Divario P-18 4 minutes Fastest joining system with a power tool Connection is complete within minutes, without waiting time, clamps, or secondary processes Spechtenhauser Spechtenhauser has been using the Lamello P-System connector for more than 3 years. The business benefits from the company s demo machine concept: Lamello provides the option of leasing a Zeta P2 biscuit joiner in order to test the machine without actually having to purchase one. The Zeta P2 won the team over during initial testing of user friendliness, reliability and speed. Along with the time saved during assembly, the company sees the key benefits of the P-System to be the precision, the aesthetics, and the stackability of parts with connectors inserted. Clamex P-14 Box of 300 pairs Box of 1000 pairs Tenso P-14 with preload function Box of 300 pairs (without preload clip) Box of 1000 pairs (without preload clip) Divario P-18 Starter-Set 80 pairs incl. installation tool S Starter-Set 80 pairs in systainer Size I, incl. installation tool and marking jig in metal Box of 300 pairs Tenso P-14 P-System Tenso P-14 gluing system with the Zeta P2 1. Cut 2. Insert Connect 5. Finished! Cut 16 cuts = 2 minutes Insert 16 connector halves = 30 seconds 4 corners = 30 seconds Connect 4 corners = 30 seconds Alternative gluing process 1. Machining 2. Insert the connector Connect 5. Clamp Ready in 4 minutes! 6. Check 7. Wait 8. Release clamp 9. Clean 10. Finished! 4 5

More ideas on our website Inspiration Be inspired by our diverse

Visit our website to discover further uses.

find the ideal solution for your specific situation!

Mr Bernhard Niederhauser, Manager of the Lamello AG joinery in Bubendorf,

aids Short installation time thanks to pre-installed joining elements

the preferred height Place the stop square on the outer table surface and

Lamello AG training centre, a bar was created from maple and oiled, with

bar or kitchen worktops, the Clamex P-14 was used as a connection

The worktop, which goes all the way to the floor, is connected to the

The workpieces are easily fitted together and powerfully fastened with or

4 More ideas on our website Inspiration Be inspired by our diverse connection solutions and the opportunities they offer! Visit our website to discover further uses. With our connector finder and the P-System configurator, you ll quickly find the ideal solution for your specific situation! Work pieces can immediately moved to storage or stacked P-System You can save a great deal of time. Parts are connected and can be sanded or oiled straight away. Mr Bernhard Niederhauser, Manager of the Lamello AG joinery in Bubendorf, Switzerland Fast, easy glueing without the need for additional glueing aids Short installation time thanks to pre-installed joining elements Adjust the size of Slide on the multifunctional stop square and fix at the preferred height Place the stop square on the outer table surface and cut an initial row of grooves Quick and stable connections In the new Lamello AG training centre, a bar was created from maple and oiled, with natural raw edges and a longitudinal steel profile between the left and right side. Inspired by the many P-System customers who use the Clamex P-14 for their bar or kitchen worktops, the Clamex P-14 was used as a connection solution. The worktop, which goes all the way to the floor, is connected to the horizontal panels using a mitre. The workpieces are easily fitted together and powerfully fastened with or without glue all without the use of complicated clamping aids. The two offset grooves make the rows bar extraordinarily strong. individual parts on Compact shipment volume due to site Adjust the swivelling front to 45 degrees and cut a second, offset row of grooves in order to make the connection more stable Workpieces up to 80 mm thick can be drilled using the long Clamex P drill jig delivery in parts 6 7

Tips tricks ntly e i c fi f e s wer Glue

14 mm stud ( 6012300) panels, without any

MiniMag Mx2, 20 Invis Mx2 connector sets

mm stud 20 pieces Invis Mx2 connector set

connector set with 30 mm stud ( 6012301)

5 Tips tricks ntly e i c fi f e s wer Glue dra Glue drawers efficiently ur Register for o newsletter at to benefit lamello.com Tips & from the next e Tricks we ll b sending out Current products from our range Invis Mx2 The unique invisible connection for highest demands on aesthetics, stability and productivity Would you like to glue drawers with 12-mm-thick Invis Mx2 connector set with 14 mm stud ( ) panels, without any need Invis Mx2 Starter Kit including MiniMag Mx2, 20 Invis Mx2 connector sets with 14 mm stud, Rasto drill jig, screw bit, flexible shaft, insertion jig, in systainer Invis Mx2 connector set with 14 mm stud 20 pieces Invis Mx2 connector set with 30 mm stud 20 pieces for clamps or presses? It s possible with the Invis Mx2 connector set with 30 mm stud ( ) Tenso P-14. Classic X How it works: 1. Cut a profile groove into the side using depth setting Cut a profile groove into the front piece using depth setting The original biscuit joiner for every workshop. Choose Lamello for precision, reliability, longevity and many other LK 10 benefits 3. Insert an element without a spring into the front piece 6. Classic X Classic X in systainer Classic X in carton S K Original wooden biscuit Insert an element with a spring into the drawer sides Join the workpieces The original biscuit that always fits! Swiss production, Swiss timber, Lamello quality Additional application for center panels 19 mm thick Wood biscuits carton Size Quantity Size 20 Size 10 Size 0 Size H mm mm mm mm H

The precise groove depth, on the Tenso P-14 in particular, has the benefit of ensuring that the connectors maximum clamping force is achieved.

It allows us to automatically compensate for differences in panel thickness, Our website got a new look at the start of this year and is now also optimised for mobile devices such as tablets and

We would like to provide you with the best possible support in planning and implementing your projects, in the form of a new and significant range of search and planning options for our connection

Find the right connector! The new connector search enables you to enter the material thickness or width to be connected, or whether the connector should be detachable or invisible.

P-System configurator for planning Refer to the last page Efficiently request products from specialist retailers After our videos and content have convinced you of the product benefits, you can note

6 lamello.com Experience our new website! In focus CNC partner network Benz floating trimming unit for P-System connectors Beck konzept AG has been using the Lamello Clamex P Medius 14/10 and Tenso P-14 connectors for some years. The precise groove depth, on the Tenso P-14 in particular, has the benefit of ensuring that the connectors maximum clamping force is achieved. This is why we use a Benz floating trimming unit with a special base on our CNC machine. It allows us to automatically compensate for differences in panel thickness, Our website got a new look at the start of this year and is now also optimised for mobile devices such as tablets and smartphones. We would like to provide you with the best possible support in planning and implementing your projects, in the form of a new and significant range of search and planning options for our connection solutions, inspiring application ideas, tips and tricks, and much more. Choosing and planning the right connectors should be just as quick, useful and easy as using the products themselves! Find the right connector! The new connector search enables you to enter the material thickness or width to be connected, or whether the connector should be detachable or invisible. The finder will then display the right connection solutions. P-System configurator for planning Refer to the last page Efficiently request products from specialist retailers After our videos and content have convinced you of the product benefits, you can note the individual products on your wish list and request them directly from your specialist retailer, allowing you to obtain an appropriate quote quickly and easily. Be inspired! The new Inspiration section includes reports by customers who are passionate about our products, explaining how Lamello saves them time and money. The Tips and Tricks which are available for download are intended to make your day-to-day work easier, with ideas that have been tried and tested on a practical basis. reports production manager Christoph Bucher. Tenso P-14 connectors are inserted straight after cutting and act as a gluing aid. Cutting P-System grooves on the Holzher Nextec It goes without saying that the software supports the cutting of all standard nesting connectors which only require vertical machining. This solution for the Lamello P-System connector solution is unique, reliable and unmatched when it comes to speed. Connector pockets can be milled into the panel surface along the X and Y axis with the optional NEXTEC Clamex package. The intelligent BetterNest software and a specially developed tool also allow perfectly positioned Clamex pockets to be cut into the edges of furniture parts, before formatting them to size within a single clamping operation. Masterwood Project TF 100 The Masterwood Project TF 100 is a highly compact CNC machine equipped for drilling, milling and cutting grooves, and only requires a production area of approx. 5m 2. The TF 100 project enables the easy implementation of different types of connections from Lamello, such as the Clamex-P and Cabineo. A large tool magazine with 6 positions enables a P-System groove cutter to be fitted onto a vertical tool holder and also onto an angle aggregate. The Masterwork software enables easy and intuitive processing for the Clamex P connection system from Lamello

Lamello AG Joining technology Hauptstrasse 149 CH-4416 Bubendorf Tel.

a piece of furniture and need to find the right P-System connector?

2. 3. Select the connection situation and enter dimensions Displaying the connection situation using the

Cabineo with wood samples Info pack: P-System with wood samples Zeta P2 demonstration P-System brochure

7 Lamello AG Joining technology Hauptstrasse 149 CH-4416 Bubendorf Tel Fax / EN Available on our website now P-System configurator Exclusive for you Are you building a piece of furniture and need to find the right P-System connector? The configurator will help you find the right connector, and tell you how to position it. How it works: Select the connection situation and enter dimensions Displaying the connection situation using the input information Select processing and connector type Contact us and order free of charge: Info pack: Cabineo with wood samples Info pack: P-System with wood samples Zeta P2 demonstration P-System brochure Catalog 2018 Invis Mx2 flyer Please contact me Company Last name First name Address ZIP Country Fill in, take a picture and send an to: info@lamello.com Of course you can also fill out the coupon online: Just take a picture of the QR code and click the link We look forward to being in touch! Your Lamello Team

P-System. Quotes. The P-System elements family continues to. Save time daily Differentiate your product

P-System. Quotes. The P-System elements family continues to. Save time daily Differentiate your product Quotes Urs Fehlmann, Production Manager HERZOG Küchen AG, Unterhörstetten TG «What impresses me most apart from its cost effectiveness is the enormous tensile strength of Clamex P.» «We use Clamex P as