.205" .164" STrong Floor SuPPorT. Gauge Matters. Bin Access. Grain Storage Bins. are constructed using high tensile steel sidewall sheets,

Size: px

Start display at page:

Download ".205" .164" STrong Floor SuPPorT. Gauge Matters. Bin Access. Grain Storage Bins. are constructed using high tensile steel sidewall sheets,"

Joel Murphy
5 years ago
Views:

Grain Storage Bins STrong Floor SuPPorT GSI manufactures many agri-floor designs to meet your specific grain type or aeration requirements.

flooring flooring cut-lok flooring Cut-Lok flooring is the strongest plank We offered complete from GSI.

designed with Our a 12% farm opening series bins that range in size from 15 to 60 diameter with prevents a variety any of flooring, restriction grain to airflow,

corrugated ribs across a crowned Farm storage surface bins for are constructed using high tensile steel sidewall sheets, maximum up to 65,000 stability. p.s.i. (450 MPa) minimum.

In addition, only GSI is capable of providing 5 and 6 gauge steel sidewall panels for unmatched strength.

surface for maximum stability. Bin Access 2.66 & 4.

In addition, corrugated steel from other sources that lack the proper machinery can lead to poor sidewall quality and cause delays in field construction.

This process assures a tighter fit and increased weather protection. in airflow.

The 20 gauge Cor-Lok is also Gauge Matters available in a small grains perforation. no other ma in The W.

The outer door cover swings completely open with the door cover hold-back and closes tightly with a weather seal.

1 Grain Storage Bins STrong Floor SuPPorT GSI manufactures many agri-floor designs to meet your specific grain type or aeration requirements. All floor parts are galvanized for lasting durability and feature traditional a unique locking gsi system cut-lok for reduced floor movement and solid support. flooring flooring cut-lok flooring Cut-Lok flooring is the strongest plank We offered complete from GSI. package This flooring solutions for all your grain storage and handling is requirements. designed with Our a 12% farm opening series bins that range in size from 15 to 60 diameter with prevents a variety any of flooring, restriction grain to airflow, conditioning, and material handling options to lanced choose extrusions from depending and deep on your specific application. corrugated ribs across a crowned Farm storage surface bins for are constructed using high tensile steel sidewall sheets, maximum up to 65,000 stability. p.s.i. (450 MPa) minimum. A commercial G-90, bright spangle galvanized steel coating increases life and durability. In addition, only GSI is capable of providing 5 and 6 gauge steel sidewall panels for unmatched strength. Cut-Lok Flooring is the strongest plank designed with a 12% opening that prevents any restriction to airflow, lanced extrusions and deep corrugated ribs across a crowned surface for maximum stability. Bin Access 2.66 & 4.00 Sidewall Panel Corrugation Due to the large investment, few bin manufacturers are capable of producing two in-house corrugated patterns. In addition, corrugated steel from other sources that lack the proper machinery can lead to poor sidewall quality and cause delays in field construction. GSI s exclusive, roll-forming press corrugates with complete precision and provides accurate sidewall sheets every time. This process assures a tighter fit and increased weather protection. in airflow. The full width corrugation and smooth surface provide easy cleaning and make this floor a popular choice. The 20 gauge Cor-Lok is also Gauge Matters available in a small grains perforation. no other ma in The W.205" All inner door panels on walk through doors open completely with no horizontal bars or braces to unbolt or remove. The outer door cover swings completely open with the door cover hold-back and closes tightly with a weather seal. 24 grandstand PAtented* locking tab supports Patented* locking tabs attach supports to the GSI plank flooring to avoid support movement during installation or fan operation in empty bins. Available in 18 gauge and 20 gauge. Tab supports lock to the floor in two different positions to prevent movement. GSI bins feature a large diameter roof manway with full rubber bulb type seal. The lid hangs fully open for ease * of Locking use. Tab Patent No " 8 gauge Vs. 5 gauge Previously, the heaviest galvanized galvanized steel available for steel sidewall panels Previously, was 8 gauge the (.164"). heaviest GSI's galvanized exclusive 5 steel gauge available (.205") galvanized for sidewall steel panels sidewall was traditional panels are 25% thicker 8 gauge (.164"). GSI's gsi cut-lok and provide exclusive 5 gauge flooring up to a 37.5% increase (.205") galvanized flooring in overall strength. steel sidewall panels are 25% thicker and GSI offers many custom aeration floor Phone: Fax: provide systems up as to well, a 37.5% including increase full floors in overall above strength. concrete with custom plenum

wer 8 (203.3mm), sweep unload and 10 capacity (254mm).

in size from 15 (4.58mm) to 6 Inch 1250 BPH 42 (12.8m).

flighting 25 Incline Power Heads 25 incline Power heads Can be

Available in 6 (horizontal) to 6 (incline), 6 to 8, 8 to 8, 8

All inclines have a 2 or 3 belt drive and include an adjustable

25 incline Power heads Horizontal horizontal Power heads

Standard units are offered in 1, 2, & 3 belt drives.

Center & Intermediate Wells Roof Vents The Hinged Grill Roof

A large mesh, wireformed screen is vertically mounted to keep

buildup Each roof vent increases exhaust area by 1.

dealer, AFS can offer comprehensive support of GSI products.

Steel Gates. Nylon Rollers in each well. 6 GK7920 $187.

60 Center Wells All wells are built with long lasting, durable

2 wer 8 (203.3mm), sweep unload and 10 capacity (254mm). The standard with sweep VerticAl can be used with bins ranging in size from 15 (4.58mm) to 6 Inch 1250 BPH 42 (12.8m). Power Heads 8 Inch 2500 BPH 10 Inch 3750 BPH ura-edge regular flighting 25 Incline Power Heads 25 incline Power heads Can be used on bins up to 75 diameter. Available in 6 (horizontal) to 6 (incline), 6 to 8, 8 to 8, 8 to 10, or 10 to 12. All inclines have a 2 or 3 belt drive and include an adjustable support stand. 25 incline Power heads Horizontal horizontal Power heads Horizontal power heads are available in 6, 8, 10, and 12 sizes. Standard units are offered in 1, 2, & 3 belt drives. Commercial units are offered in 2, 3, or 4 belt drives. Center & Intermediate Wells Roof Vents The Hinged Grill Roof Vent features heavy duty lock seams for weather protection. A large mesh, wireformed screen is vertically mounted to keep out pests and swings open freely to allow easy release of trash buildup Each roof vent increases exhaust area by 1.6 square feet and bolts directly to a factory, pre-punched roof sheet. hinged grill Vent MIS-6786 $ horizontal Power heads material handling Page 8 As a GSI dealer, AFS can offer comprehensive support of GSI products. material handling Page 8 Intermediate Well 8 Gauge Galvanized Steel Gates. Nylon Rollers in each well. 6 GK7920 $ GK7921 $ Center Wells All wells are built with long lasting, durable galvanized steel. Our bin wells work with an aeration/ drying floor, preformed trench. 6 GK2804 $ GK2805 $ Center Well Trash Guard Helps to divert trash away from the center well entrance. Avoid the nuisance of clogged wells and keep the grain flowing. AAA $53.00 Toll-Free

Grain Storage Bins Sweep Augers Removable Sweep Augers Sweep Auger Parts Breakdown Removable bin sweeps give you the versatility to easily move the entire unit from one bin to another.

Bins 30 or larger include an intermediate bearing to help stabilize the sweep flight. 5 3 3 5 2 1 4 6 Item No. Part No. Description Price 1 B38 B38 Belt $12.03 2 GK1237 7 Sheave - 1 Bore $32.

3 Grain Storage Bins Sweep Augers Removable Sweep Augers Sweep Auger Parts Breakdown Removable bin sweeps give you the versatility to easily move the entire unit from one bin to another. Available in 6, 8, and 10 sizes and can be used in bins ranging in size from 15 to 42. Sealed, self-aligning bearings used on all sweeps. Torque tube and back shield adjust for close floor clearance. Bins 30 or larger include an intermediate bearing to help stabilize the sweep flight Item No. Part No. Description Price 1 B38 B38 Belt $ GK Sheave - 1 Bore $ SAPF Pressed Steel Flange Bearing $ GK1073 Extension for Pivot Pin Tube $ S /16 Roll Pin: 2 Long $ GK Rubber Wheel Disc (for 6 sweep wheel, 5 needed for set) $ GK Rubber Wheel Disc (for 8 sweep wheel, 5 needed for set) $ GK Rubber Wheel Disc (for 10 sweep wheel, 5 needed for set) $ Phone: Fax:

Power Sweeps A Direct Gear Drive sweep can be the most convenient way to unload grain because it is permanently installed. No heavy sweep and motor to carry in and out of the bin.

The offset sweep arm is an innovative design which allows the intermediate wells to be unobstructed by the sweep arm.

Power Sweep Parts Breakdown 1 Rack and pinion controls are standard on all 10 sweeps and optional for 8. These controls make opening and closing well gates very easy. 3 6 6 2 4 5 7 Item No.

4 Power Sweeps A Direct Gear Drive sweep can be the most convenient way to unload grain because it is permanently installed. No heavy sweep and motor to carry in and out of the bin. Reduction wheel and hanger bearing stabilize and support the auger against the weight of the grain. The offset sweep arm is an innovative design which allows the intermediate wells to be unobstructed by the sweep arm. This allows for a larger clean out area in front of the sweep, placing less demand on the sweep at startup. Power Sweep Parts Breakdown 1 Rack and pinion controls are standard on all 10 sweeps and optional for 8. These controls make opening and closing well gates very easy Item No. Part No. Description Price 1 GK80187 Gearbox with Clockwise Rotation $ GK6698 Center Well Square Shaft - 6 and 8 $ GK Tooth Clutch Yoke Driver Jaw - 6 and 8 $ S /4 x 1/4 #21 Woodruff Key $ GK1696 Clutch Yoke Driven Sliding Jaw $ S O.D. x 15/16 I.D. Groove Snap Ring $ GK Tooth Idler Sprocket, 5/8 Bore, #50 w/ Bearing $16.80 Toll-Free

Grain Storage Bins Grain Spreaders SPIN LEVEL GRAIN SPREADER $350.

This spreader relies on the most dependable force of nature known to man - gravity.

The spinning rotor is an oval conical volute that varies the width and diameter of the spread as it turns.

[1] Max Capacity Spreads up to 3600 bushels per hour. Will work with any auger up to 8. Suited for bins up to 30 diameter.

no electical hookup and no possibility of untimely motor failure.

5 Grain Storage Bins Grain Spreaders SPIN LEVEL GRAIN SPREADER $ Simple, robust design The Spin Level is a simple answer to uniform spreading. This spreader relies on the most dependable force of nature known to man - gravity. The weight of descending grain spins the bottom cone, spreading in an even pattern while avoiding grain damage. The spinning rotor is an oval conical volute that varies the width and diameter of the spread as it turns. The spreader is effective with any volume of grain, from a small dribble to the output of a 8 auger. [1] Max Capacity Spreads up to 3600 bushels per hour. Will work with any auger up to 8. Suited for bins up to 30 diameter. [2] Dimensions Overall height: 29 Max hopper diameter: 17 Max spinner diameter: 31 Hanger reach diameter: [3] Simplicity No motor means no electical hookup and no possibility of untimely motor failure. Permanently lubricated nylon bearings offer long life while removing the possibility of seizure from extended periods of disuse. Wheel Drive GRAIN SPREADER PARTS 3EL5082 Replacement 1 HP. 1PH. motor for Model 986 Spreader $ A0001 Wheel Drive for 986 Spreader $ A0313 Rubber Wheel for 986 Spreader $61.60 Model 986 Spreader Motor Replacement 1/2 HP. 1PH. motor for Model FFD-120-WH Spreader $ Replacement 1 HP. 1PH. motor for Model FFD Spreader $ Rubber Wheel 28 Phone: Fax:

DMC Scattergrain: Economical & Efficient Today s economy demands maximum efficiency in every facet of a farming operation. That s why Scattergrain is a sensible investment.

Exclusive dampercontrolled center openings also adjust to fill the difficult center section. FFD-120-WH Spreader $945.

flow diverter kit FFD-200-1 Spreader $1749.

construction [1] Sealed Gear Drive- The gear drive is encased in heavy duty, high temperature, food grade lubricant which assures years of virtually maintenance-free operation.

[3] Damper Plates- Adjustable plates in the blade allow grain to be distributed evenly in the bin center. [4] Grain Guides- Adjust to distribute grain to outer areas.

This results in more uniform moisture content. In fact, university tests have shown less than 1% moisture variation from top to bottom in stirred grain.

Iowa State University tests have found that using a stirring machine in wet grain with a powered spreader increases airflow by 33%.

6 DMC Scattergrain: Economical & Efficient Today s economy demands maximum efficiency in every facet of a farming operation. That s why Scattergrain is a sensible investment. The Scattergrain distributor s blade has adjustable grain guides and extensions that adjust to reach the outer edges of the specific bin diameter. Exclusive dampercontrolled center openings also adjust to fill the difficult center section. FFD-120-WH Spreader $ Handles up to 3,000 BPH Fills bins up to 50 feet or larger in diameter Energy efficient 1/2 HP, 115 volt, single phase motor All galvanized construction Standard wide throw blade Standard flow diverter kit FFD Spreader $ Handles up to 6,000 BPH Fills bins 50 feet or larger in diameter Energy efficient 1 HP, single or three phase motor All galvanized construction Heavy 14 gauge cone All galvanized construction [1] Sealed Gear Drive- The gear drive is encased in heavy duty, high temperature, food grade lubricant which assures years of virtually maintenance-free operation. [2] Adjustable Mount- All models mount in openings up to 31 inches in diameter. A special adaptor fits openings up to 60 in diameter. [3] Damper Plates- Adjustable plates in the blade allow grain to be distributed evenly in the bin center. [4] Grain Guides- Adjust to distribute grain to outer areas. [1] [2] [3] [4] Stirring Machines DMC Stir-Ator: Durable and Economical Stirring mixes the dried grain at the bottom of a bin with wetter grain toward the top. This results in more uniform moisture content. In fact, university tests have shown less than 1% moisture variation from top to bottom in stirred grain. Stirring also loosens grain, reduces static pressure and increases airflow. This in turn means grain dries more quickly and efficiently. Iowa State University tests have found that using a stirring machine in wet grain with a powered spreader increases airflow by 33%. Uses a spiral stirring pattern to completely and evenly stir the entire bin every stirring cycle. DMC Stir-Ator is the only stirring machine which spends more time toward the outside of the bin, where much of the grain is stored. 9:1 gear motor ratio push DMC s stirrator through the stack more aggressively than any other stirring machine on the market. Solid State electronic tilt switches offer excellent reliability and repeatability. Safety Shut-Off will shut the machine down if it binds. Optional Stir-Guard protects grain from overstirring. If the machine does not move forward for 45 minutes, Stir-Guard shuts the machine down. Works well with batching and continuous flow in-bin drying systems Toll-Free

COMMERCIAL GRAIN SILO

COMMERCIAL Grain Storage Systems COMMERCIAL GRAIN SILO 8980 Whatsapp +90 551 152 9361 w w w. t e c o d r ye r.com Grain Storage Silos : Teco silo grain storage systems, the silos of the leading sectors