wood finishes Italian coatings

Transcription

1

2 wood finishes Italian coatings application equipment

3 wood finishes are the UK market leaders with production and laboratory facilities in Stockport, England. This is the source of Morrells legendary range of acid-catalyst, waterborne and UV-curable coatings technology, along with their class-leading architectural coatings xerofire, clasolac, omnia, induro and medicote. is the Italian coatings division specialising in the production of polyurethane and polyester coatings including mirror-gloss and acrylic lacquer systems. VLi is also the source of our specialeffects range of interior design finishes for the shopfitting and leisure goods industries. Hard wearing off-the-gun Frost, Suede, Raindrop, Mother-Of-Pearl and completely unique Antique Copper, Bronze and Ferrous Rust effects, to mention just a few! is Morrells brand for a vast range of spray equipment and application accessories available to customers across the UK and beyond. To achieve sprayshop status all products must meet Morrells exacting standards and compliment the entire coatings range.

4 Our passion is bringing new products to market; more efficient, better performing, more environment-friendly products our customers really value. Morrells success has been built on clever formulations that simply work better than anything else. The largest range of top quality wood finishes in the UK and Ireland with the most consistent supply record has contributed to the success of a truly unique brand. Morrells coatings come with know-how included and customer care is a company-wide virtue. The company cherishes strong long-term relationships with customers at every level. Personal attention, after-sales service and technical back-up are cornerstones of the business.

5 ADVANCED BRITISH WOOD FINISH TECHNOLOGY WITH OVER A CENTURY OF EXPERIENCE Morrells is a strong and enduring brand trusted by loyal customers across the UK and beyond. Morrells customers are proud of their design, their joinery, their cabinet making, and they insist on a world class finish to complete the job. In April 2015 RPM International Inc. acquired Morrells Woodfinishes Ltd, the United Kingdom s largest manufacturer of high-performance wood finishes. RPM, based in Cleveland Ohio, are a NYSE quoted company with annual sales over $5 billion. Morrells not only remain a stand-alone operation, but also head RPM s Specialist Wood Coatings Division in Europe. With a strong management team, led by Chief Executives Scott Drayton and Tony O Connor, who will stay on to run the business, a portfolio of advanced technologies and a customer-centric distribution strategy, Morrells is an excellent fit within our Wood Finishes Group, stated Frank C.Sullivan, RPM chairman and Chief Executive Officer. We intend to accelerate Morrells growth by leveraging its coatings technologies across the RPM network. ISO Environmental Mangemen t ISO 9001 Qualit y Mangemen t EMS FM

6 THE LARGEST MANUFACTURER OF WOOD FINISHES IN THE UK

7 9 MORRELLS HIGH-PERFORMANCE INTERIOR COATINGS INDEX Wood Stains Patinas & Grainfillers 10 Acid-catalyst Lacquers & Fastmatch colours 14 Waterborne Lacquers & Fastmatch colours 18 Pre-catalyst Lacquers & Fastmatch colours 22 Ultra-violet cure Lacquers VLi Polyurethane Lacquers & Fastmatch colours VLi Polyester Lacquers MORRELLS ARCHITECTURAL COATINGS & fire-retardant coatings 40 exterior joinery coatings 44 floor coatings 48 anti-bacterial coatings 52

8 STA TE-OF-THE-A RT FINISHES FOR TODAY S WOODWORKING INDUSTRIES

9 high-performance INTERIOR COATINGS 9

10 WOOD STAINS, PATINAS AND GRAIN FILLERS Morrells provides a bespoke colour matching service for all stains and patinas. LIGHT FAST STAINS A spirit based stain suitable for spray, dip and hand application. Formulated Precatalyst and Acid Catalyst lacquers up to a maximum of 5% by volume. Pack sizes available: 1L, 5L and 25L Touch dry: C Coverage: Approximately 40-60m 2 per 5 litres dependent upon the size, orientation and surface quality of the item being coated CLASSIQUE STAINS - SPRAY AND WIPE A range of slower drying solvent-based stains suitable for hand, spray depth of colour. This range is also suitable for tinting Morrells Cellulose and Precatalyst Lacquers up to a maximum of 5% by volume. Pack sizes available: 5L and 25L Touch dry: 20 mins 18 C Coverage: Approximately 40-60m 2 per 5 litres dependent upon the size, orientation and surface quality of the item being coated INTERIOR COATINGS standard range 0171/000 Violet 0182/000 Golden Oak 0172/000 Black 0182/100 New Light Oak 0174/000 Light Blue 0182/200 New Medium Oak 0175/000 Red 0182/300 Dark Oak 0176/001 Blue 0182/400 Jacobean 0177/000 Orange 0188/000 Teak 0178/000 Yellow 0190/000 Walnut 0180/000 Green 0191/000 Yew 0181/000 Mahogany 0191/100 Antique Yew 0181/100 Natural Mahogany 0198/000 Antique Pine 0181/200 Brown Mahogany 0198/100 Honey Pine 0181/300 Dark/Rich Mahogany 0198/200 Victorian Pine 0181/400 Plum Mahogany 0198/300 Stripped Pine 0181/500 New Rosewood 0170/000 Light Fast Thinners 0181/600 Antique Mahogany 10 standard range 134/0001 Dark/Rich Mahogany 134/0011 Dark Oak 134/0002 Medium Oak 134/0012 Teak 134/0003 Natural Mahogany 134/0013 Walnut 134/0004 Rosewood 134/0014 Yew 134/0005 Antique Pine 134/0015 Victorian Pine 134/0006 Brown Mahogany 134/0016 Jacobean 134/0007 Plum Mahogany 134/0017 Honey Pine 134/0008 Golden Oak 134/0018 Stripped Pine 134/0009 Repro Mahogany 130/070 Thinners 134/0010 Light Oak

11 WOOD STAINS, PATINAS AND GRAIN FILLERS CLASSIQUE STAINS - SPRAY AND LEAVE A range of fast drying solvent-based stains suitable for hand, spray or dip of colour. This range is also suitable for tinting Morrells Cellulose and Precatalyst Lacquers up to a maximum of 5% by volume. Pack sizes available: 5L and 25L Touch dry: 20 mins 18 C. Coverage: Approximately 40-60m 2 per 5 litres dependent upon the size, orientation and surface quality of the item being coated. standard range 135/0001 Dark/Rich Mahogany 135/0011 Dark Oak 135/0002 Medium Oak 135/0012 Teak 135/0003 Natural Mahogany 135/0013 Walnut 135/0004 Rosewood 135/0014 Yew 135/0005 Antique Pine 135/0015 Victorian Pine 135/0006 Brown Mahogany 135/0016 Jacobean 135/0007 Plum Mahogany 135/0017 Honey Pine 135/0008 Golden Oak 135/0018 Stripped Pine 135/0009 Repro Mahogany 130/071 Thinners 135/0010 Light Oak

12 WOOD STAINS, PATINAS AND GRAIN FILLERS Morrells provides a bespoke colour matching service for all stains and patinas. COMPLIANT WATER STAINS A range of water-based stains suitable for hand, spray or dip application. The standard range consists of popular primary colours and a selection of the most widely used wood colours. Formulated on organic metal-complex dyestuffs dissolved in water which comply with the VOC requirements of Clause 19 of the Secretary of States Guidance Note for Wood Coating Processes PG6/33 (11) appendix 2. Pack sizes available: 5L and 25L. Touch dry: C Overcoat: 2 hours 18 C Coverage: Approximately 40-60m 2 per 5 litres dependent upon the size, orientation and surface quality of the item being coated. standard range 0880/001 Antique Green 0881/000 Mahogany 0882/300 Dark Oak 0881/100 Natural Mahogany 0882/400 Jacobean Oak 0881/200 Brown Mahogany 0888/000 Teak 0881/300 Dark Mahogany 0890/000 Walnut 0881/400 Plum Mahogany 0891/000 Yew 0881/500 Rosewood 0891/100 Antique Yew 0881/600 Repro Mahogany 0898/000 Antique Pine 0882/000 Golden Oak 0898/100 Honey Pine 0882/100 Light Oak 0898/200 Victorian Pine 0882/200 Medium Oak 0898/300 Stripped Pine GRAIN FILLERS mahogany and oak; they are always applied after any base staining operation. Always consult Morrells Technical Service Department prior to the use of these materials. Pack sizes available: 1.5kg and 7kg Touch dry: 4 hours 18 C. Overcoat: Leave 24 hours for best results Coverage: 40m 2 per 7 kilos standard range 4842/000 White 4882/100 Light Oak 4843/000 Transparent 4882/200 Medium Oak 4881/100 Natural Mahogany 4882/300 Dark Oak 4881/200 Brown Mahogany 4882/400 Jacobean 4881/300 Dark Mahogany 4888/000 Teak 4881/500 Rosewood 4890/000 Walnut 4881/600 Reproduction Mahogany 4891/000 Yew 4882/000 Golden Oak 4870/000 Thinners INTERIOR COATINGS 12

13 WOOD STAINS, PATINAS AND GRAIN FILLERS PATINAS Patinas are spray applied over a lacquer coat or sealer to achieve authentic aged and distressed effects. A feathered removal of the coating is required to achieve the best results. Pack size available: 5L Touch dry: 5 minutes Overcoat: 30 minutes Coverage: 40m 2 per 5 litres Product codes 203/200 Black 203/201 Dark Brown 203/202 White RO34 Methylated Spirits

14 CLEAR ACID-CATA ALYST LACQUERS Quick drying, easy sanding acid catalyst lacquers designed for manual or automatic spray application, coat-on-coat. Formulated to provide outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Meets the requirements of FIRA standard 6250: 2005 for horizontal surfaces (excluding kitchen worktops) and rated as Severe Use. Secretary of States guidance note for wood coating processes PG6/33(11) appendix 2. Lacquers of this type achieve their full resistance properties after days curing, although careful use is possible before this period. Catalysed 9:1 under normal conditions these lacquers will have a workable pot life of 36 hours. Pack sizes available: 5L and 25L Catalyst sizes available: 500ML and 2.5L

15 CLEAR ACID-CATALYST LACQUERS VERY FAST DRY MELAMINE ACID CATALYST LACQUERS Touch dry: C Sandable: C Recoatable: 1 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Light Fast Stains up to a maximum of 5% (after catalysis) 2-3 coats at 75g/m 2 per coat, coat-on-coat 5901/330 90% Sheen 5503/330 50% Sheen 5403/330 40% Sheen 5303/330 30% Sheen 5203/330 20% Sheen 5103/330 10% Sheen 5CAT/100 Catalyst 2007/900 Thinners HIGH BUILD/FAST DRY ACID CATALYST LACQUERS Touch dry: C Sandable: 1 18 C Recoatable: C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Light Fast Stains up to a maximum of 5% (after catalysis) 2-3 coats at 75g/m 2 per coat, coat-on-coat 5901/440 90% Sheen 5503/440 50% Sheen 5403/440 40% Sheen 5303/440 30% Sheen 5203/440 20% Sheen 5103/440 10% Sheen 5CAT/200 Catalyst 2007/900 Thinners LOW ODOUR/HIGH BUILD ACID CATALYST LACQUERS Touch dry: C Sandable: 1 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Light Fast Stains up to a maximum of 5% (after catalysis) 2-3 coats at 75g/m 2 per coat, coat-on-coat. EXTRA HIGH SOLIDS COMPLIANT ACID CATALYST LACQUERS Touch dry: C Sandable: 1 18 C Recoatable: C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Light Fast Stains up to a maximum of 5% (after catalysis) 2-3 coats at 75g/m 2 per coat, coat-on-coat 5901/450 90% Sheen 5503/450 50% Sheen 5403/450 40% Sheen 5303/450 30% Sheen 5203/450 20% Sheen 5103/450 10% Sheen 5053/450 5% Sheen 5CAT/100 Catalyst 5007/450 Thinners /590 90% Sheen 5503/590 50% Sheen 5403/590 40% Sheen 5303/590 30% Sheen 5203/590 20% Sheen 5103/590 10% Sheen 598/W01 Basecoat 5CAT/300 Catalyst Do not use Thinners INTERIOR COATINGS

16 FASTMATCH ACID-CATALYST COLOURS ACID-CATALYST COLOURS A quick drying, high opacity pigmented range of acid catalyst colours providing outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Products of this type achieve their full resistance properties after days curing, although careful use is possible before this period. Catalysed 9:1, under normal conditions these products will have a workable pot life of 36 hours. Use Catalyst 5CAT/200 for gloss AC Fastmatch colours. Available in White (BS 00-E-55), Black (BS 00-E-53) and a wide spectrum of Fastmatch colours. Pack sizes available: 5L and 25L Catalyst sizes available: 500ML and 2.5L Touch dry: C Sandable: 1 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 2 coats at 75g/m 2 per coat, over Primers 5005/619, 5005/600, or 5005/900 Product codes (white): 5905/520 90% Sheen 5505/520 50% Sheen 5405/520 40% Sheen 5305/520 30% Sheen 5205/520 20% Sheen 5105/520 10% Sheen 5CAT/100 Catalyst 5007/450 Thinner

17 ACID-CATALYST PRIMERS ACID CATALYST PRIMERS Fast drying high solids primers with high covering power and easy sanding properties, for use on MDF and most interior wooden substrates. Catalysed 9:1 under normal conditions this product will have a workable pot life of 36 hours. Pack sizes available: 5L and 25L Catalyst sizes: 500ML and 2.5L Touch dry: C Sandable: 1 18 C Recoatable: 2 18 C 1-2 coats at 75g/m 2 per coat, under Fastmatch Acid Catalyst Colours 5005/619 White AC Primer 5005/600 White RFU AC Primer 578/600 Grey AC Primer 5007/619 Thinners 578/W05 Black AC Primer 5CAT/200 Catalyst UHS 2 PACK PRIMERS be sprayed through normal cup guns and provide in 2 coats a completely hours. They are also used to reduce VOC emissions and are an alternative to polyester systems. Pack sizes available: 5kg Catalyst sizes: 500ML Gel Coat recoatable: C Sandable: C Coverage: 20m 2 per 5 litres 2-3 coats at g/m 2 per coat, under Fastmatch 2 pack colours 5005/900 White UHS Primer 5006/900 Black UHS Primer 5004/900 Clear UHS Sealer 5CAT/900 UHS Catalyst X001 Fast Thinners Fastmatch from Morrells is the foundation for all our customers colour matching requirements. 100,000 colours at the touch of a button and a shake of a tin! Fastmatch is available in Acid Catalyst, Precatalyst, Polyurethane, Waterborne, Fire-retardant and Patina stains through Morrells Branch Network across the UK and Ireland. Alternatively, specials are formulated, manufactured and quality controlled at our headquarters in Woodley, then given a unique production matching team at Woodley tint thousands of specials for customers every year, and are dedicated to the highest standards of quality. 17 For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website INTERIOR COATINGS

18 CLEAR WATERBORNE LACQUERS HIGH-PERFORMANCE WATERBORNE LACQUERS A range of ultra high-performance waterborne lacquers offering excellent clarity and build. Can be used over 8004/341 sealer or coat-on-coat and offers similar performance properties to a high quality Acid Catalyst lacquer 2005 for horizontal surfaces (excluding kitchen worktops) in Heavy/Severe Use. No catalyst is required, thus avoiding extra mixing and the health hazards associated with some external cross linking hardeners. Pack sizes available: 5L and 25L Touch dry: C Sandable: 2 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Compliant Water Stains up to a maximum of 2% 2 coats at 75g/m 2 per coat, coat-on-coat or with 8004/341 sealer WATERBORNE WOOD-WARMING SEALER 8004/341 A next generation Waterbased sealer that not only exhibits a good in-can clarity but has been specially formulated to enhance the timbers natural topcoat systems. This sealer has been designed to be universally over-coatable with all of Morrells waterborne and solvent borne topcoats. Pack sizes available: 5L and 25L Touch dry: C Sandable: 2 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Compliant Water Stains up to a maximum of 2% 8901/362 90% Sheen 8503/362 50% Sheen 8403/362 40% Sheen 8303/362 30% Sheen 8203/362 20% Sheen 8103/362 10% Sheen 8004/341 Sealer INTERIOR COATINGS 18

19 CLEAR WA TERBORNE LACQUERS MORRELLS ITALIAN WATERBORNE LACQUERS A range of clear 1K & 2K Waterborne lacquers (in partnership with ICA Italy) for manual and automated spray application to any wood substrate including kitchen and bathroom furniture. The products are accredited to FIRA(BS) 6222 Part 3 Kitchen Specification and exhibit excellent chemical and physical resistance properties, including outstanding coffee stain resistance. Pack sizes available: 5L Product information (1K): Touch dry: C Sandable: 2 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Typical finish: 2 coats at 75g/m2 per coat, coat-on-coat or with Clear Basecoat 8I004/350 An Anti-yellowing Hardener for Lacquers only 10:1 mixing ratio) can be added to improve chemical and physical performance. Product codes (1K): 8I103/320 8I203/320 8I303/320 8I403/320 8I004/350 8I004/430 10% Sheen 20% Sheen 30% Sheen 40% Sheen Clear Basecoat Clear High-solids Basecoat 2K Clear Supercare Waterborne Lacquers for ultimate durability are also available - visit

20 FASTMATCH WATERBORNE COLOURS FASTMATCH WATERBORNE COLOURS Fastmatch from Morrells is the foundation for all our customers colour matching requirements. 100,000 colours at the touch of a button and a shake of a tin! Fastmatch is available in Acid Catalyst, Precatalyst, Polyurethane, Waterborne, Fire-retardant and Patina stains through Morrells Branch Network across the UK and Ireland. Alternatively, specials are formulated, manufactured and quality controlled at our headquarters in Woodley, then given a unique production matching team at Woodley tint thousands of specials for customers every year, and are dedicated to the highest standards of quality. WATERBORNE COLOURS A range of high opacity waterborne coatings designed for spray 8005/501 WHITE ANYCOAT WATERBORNE PRIMER A high-performance white primer which can be over-coated with any Morrells solvent or waterborne coating. Also noted for its low grain raising, good hiding power and crisp sanding, this primer can be used under solvent-borne topcoats to reduce VOC emissions. Pack sizes available: 5L and 25L Touch dry: C Sandable: C Recoatable: C Packing: Overnight minimum Coverage: 40m 2 per 5 litres order and quality controlled at Headquarters. No catalyst is required thus avoiding extra mixing and the health hazards associated with some external Touch dry: C Sandable: 2 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 2 coats at 75g/m 2 per coat, coat-on-coat or with 8005/501 primer Product codes (white): INTERIOR COATINGS 8655/421 65% Sheen 8505/421 50% Sheen 8405/421 40% Sheen 8305/421 30% Sheen 8205/421 20% Sheen 8105/421 10% Sheen 20

21 FASTM ATCH WA TERBORNE COLOURS MORRELS ITALIAN WATERBORNE COLOURS A range of white and pigmented 1K & 2K Waterborne lacquers for manual and automated spray application primarily to kitchen furniture. The products are accredited to FIRA(BS) 6222 Part 3 Kitchen Specification and exhibits excellent chemical and physical resistance properties including outstanding coffee stain resistance. Pack size available: 5kg Touch dry: 18 C Sandable: 2 18 C Recoatable: 2 18 C Packing: overnight minimum Coverage: 40m 2 per 5 litres Typical finish: 2 coats at 75g/m2 per coat, coat-on-coat or with special waterborne primers, see below Product codes (White, mix 8:1 by volume 8ICAT/508 ): 8I105/450 8I155/450 8I255/450 8I405/450 8I555/450 8I705/450 8I005/490 8I005/520 8I005/530 8ICAT/502 8ICAT/508 8ICAT/500 8ICAT/522 10% Sheen 15% Sheen 25% Sheen 40% Sheen 55% Shee 70% Sheen White Tannin-block Waterborne Primer (mix 7:1 by volume 8ICAT/502 ) White Curtain-coat Waterborne Primer (mix 16:1 by volume 8ICAT/500) White Waterborne Primer Fast Anti-yellowing Hardener Easy-stir Anti-yellowing Hardener Standard Anti-yellowing Hardener Auto-mix Anti-yellowing Hardener

22 CLEAR PRE-CATALYST LACQUERS PRE-CATALYST LACQUERS A high quality 25% solids FIRA Standard 6250: 2005 General Use Lacquer for manual or automatic spray application, coat-on-coat or over 9004/250 precatalyst basecoat. Also available in a waxy feel version. Pack sizes available: 5L and 25L Touch dry: C Sandable: C Recoatable: 30 minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 9901/250 90% Sheen 9503/250 50% Sheen 9403/250 40% Sheen 9303/250 30% Sheen 9203/250 20% Sheen 9103/250 10% Sheen 9053/250 5% Sheen 9004/250 Basecoat 2007/000 Thinners HIGH SOLIDS PRE-CATALYST LACQUERS coats and to prevent aeration on deep-grained timbers such as crown-cut mahogany. Can be used either over 9004/280 basecoat or coat-on-coat. Meets the requirements of FIRA standard 6250: 2005 for horizontal surfaces (excluding kitchen worktops) in General Use. Pack sizes available: 5L and 25L Touch dry: C Sandable: C Recoatable: 30 minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 9901/280 90% Sheen 9503/280 50% Sheen 9403/280 40% Sheen 9303/280 30% Sheen 9203/280 20% Sheen 9103/280 10% Sheen 9053/280 5% Sheen 9004/280 Basecoat 2007/000 Thinners INTERIOR COATINGS 22

23 CLEAR PRE-CAT ALYST LACQUERS HIGH BUILD MDF PRE-CAT ALYST SEALER formulated for use on MDF substrates. Due to the nature of the solvents utilised this product will not encourage the dissolution of waxes at the MDF surface. Suitable for use under all Morrells clear and pigmented Precatalyst topcoats. Excellent hold-up on MDF edges and easy to sand. Also available in a cellulose version for rapid drying and improved hold up when spraying MDF vertical surfaces (2004/300). Pack sizes available: 5L and 25L Touch dry: C Sandable: C Recoatable: 30 minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 9004/329 High Build MDF Precatalyst Sealer 2004/300 Fast Dry MDF Cellulose Sealer 2007/900 Hydrocarbon-free Thinners

24 FASTMATCH PRE-CATALYST COLOURS PRE-CATALYST COLOURS A very fast drying, high opacity range of durable single pack interior coatings suitable for all areas where resistance to aggressive abrasion, heat or chemical attack is not required. Available in White (BS 00-E-55) Black (BS 00-E-53) and a wide spectrum of Fastmatch colours (see Fastmatch ). Pack sizes available: 5L and 25L Touch dry: C Sandable: C Recoatable: 30 minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Product codes (white): 9705/350 50% Sheen 9505/350 50% Sheen 9405/350 40% Sheen 9305/350 30% Sheen 9205/350 20% Sheen 9105/350 10% Sheen 2007/000 Thinners FASTMATCH COLOUR MATCHING SERVICE Fastmatch Colour Matching Service from Morrells is the foundation for all our customers colour matching requirements. 100,000 colours at the touch of a button and a shake of a tin! Fastmatch is available in Acid Catalyst, Pre-catalyst, Polyurethane, Waterborne, Fire-retardant and Patina stains, through the Morrells Branch Network across the UK and Ireland. Alternatively, specials are formulated, manufactured and quality controlled at our headquarters in Woodley, then given a unique production code Our skilled laboratory colour matching team at Woodley tint thousands of specials for customers every year, and are dedicated to the highest standards of quality. INTERIOR COATINGS 24 For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website

25 FASTMATCH PRE-CATALYST COLOURS PRE-CATALYST PRIMERS A fast drying, easy to sand, single pack primer with good covering power. Formulated for use on MDF and suitable for all wooden substrates. Ideal for overcoating with Fastmatch Pre-catalyst Colours. Also available in Dark Grey (278/606) and Black (968/W02C). Pack sizes available: 5L and 25L Touch dry: C Sandable: C Recoatable: 30 minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 9005/519 White Pre-catalyst Primer 278/606 Dark Grey Primer 968/W02C Black Primer 2007/900 Hydrocarbon-free Thinners

26 UV CURABLE COATINGS The Morrells range of ultra-violet cure coatings offers an extensive portfolio of technically advanced products for modern mass production applications. materials (cork tiles, woodblock and parquet), doors, architraves and picture frames. Systems based on Morrells UV products will meet the requirements of FIRA Standard 6250 for horizontal surfaces and Severe Use. The majority of Morrells UV products contain do not contain solvents, hence no emissions. Furthermore, due to the speed of cure, energy requirements are lower than those of conventional lacquers. Although applied at considerably lower coatings weights than conventional lacquers, Morrells UV products create durable coatings with excellent chemical and physical resistance properties. They are available in a variety of sheen levels from Matt to High Gloss. As the majority are solvent free, the lacquers can be cured immediately after application. Curing is virtually an instantaneous process, requiring a second components can be stacked and packed straight off the production line. The most common method of application is by rollercoater, either U6042/0XX UV SEALERS/BASECOATS products are suited to various substrates including veneer, solid wood and engineered board. With excellent sanding properties they provide a smooth and resilient base for application of Morlux topcoats. U6X41/001 UV TOPCOATS The careful selection of resins, matting agents, waxes and photoinitiators has produced coatings that are ideally suited to application by conventional rollercoaters. They offer superb chemical and physical resistance properties coupled with a smooth aesthetic appearance and touch. U6X41/003 UV OPTI TOPCOATS The balanced combination of resins, matting agents, waxes and photoinitiators have been formulated to be applied over pre-sealed substrates using grooved Opti/Lazer rollercoaters. As with the conventional excellent chemical and physical resistance properties. INTERIOR COATINGS Vacuum coaters are increasingly used to apply UV products to a wide variety of mouldings and extrusions. The Morrells range of waterborne UV lacquers are ideally suited to application by auto-spraying. Again, this Strong contacts with major UV equipment manufacturers allows Morrells UV team to work in conjunction with customers and manufacturers to ensure requirements. This commitment begins with the initial planning through to commissioning of plant, training of operatives and continues with on-going support and back-up. 26 Please refer to Morrells Technical Support Department for information on curing cycles, coating weights and coverage data. Pack size available: 20 litres

27 UV CURABLE COATINGS U6X41/041 UV COMBI LACQUERS These Lacquers are based on a combination of solvent free UV Curable with the surface properties of a topcoat, for use as a coat-on-coat system. As with all Morlux products they offer supreme chemical and physical U6X91/404 UV WA TERBORNE UV LACQUERS With excellent drying properties and adhesion to various substrates, formulated for autospray application and therefore are ideally suited to U6X21/0XX UV VACUUM COATER LACQUERS coating. Their reactivity allows them to be used at line speeds in excess of 50m per minute.

28 CLEAR POLYURETHANE LACQUERS CLEAR POLYURETHANE LACQUERS Fast curing, easy to use lacquers with outstanding resistance to abrasion, heat, chemical attack and water ingress. 80% of the drying/curing is at 2:1 this lacquer has a usable pot life of 3 hours at 18 C. Pack sizes available: 5L Touch dry: C Sandable: C Recoatable: minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 1-3 coats at 75g/m 2 per coat applied coat-on-coat or over PU sealer 6004/ /460 90% Sheen 6502/460 50% Sheen 6302/460 30% Sheen 6202/460 20% Sheen 6102/460 10% Sheen 6CAT/23 Catalyst for lacquers 6007/000 Standard PU Thinner CLEAR ACRYLIC POLYURETHANE LACQUERS A fast curing non-yellowing lacquer with excellent durability. Suitable for at 5:1 this lacquer has a usable pot life of 3 hours at 18 C. Pack sizes available: 5L Touch dry: C Sandable: C Recoatable: minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 1-3 coats at 75g/m 2 per coat applied coat-on-coat 6902/300 90% Sheen 6502/300 50% Sheen 6302/300 30% Sheen 6102/300 10% Sheen 6CAT/52 Catalyst for lacquers 6007/000 Standard PU Thinner INTERIOR COATINGS 28

29 CLEAR POLYURETHANE LACQUERS CLEAR POLYURETHANE SEALER A very fast drying, high build sealer with easy sanding properties. Suitable for all wood substrates and for overcoating with all polyurethane lacquers. Catalysed at 2:1 this sealer has a usable pot-life of 3 hours at 18 C. Pack sizes available: 5L Touch dry: C Sandable: C Recoatable: minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 2 coats of PU Sealer at 100g/m 2 per coat, followed by 2 coats any Morrells PU Lacquer at g/m 2 per coat 6004/460 PU Sealer 6CAT/ /000 Standard PU Thinner Catalyst for Sealer

30 CLEAR POLYURETHANE LACQUERS CLEAR WET-LOOK POLYURETHANE LACQUERS A mirror gloss lacquer with excellent durability, used on high quality wooden furniture and trim. Can be burnished post cure. Catalysed at 1:1 this lacquer has a usable pot life of 2 hours at 18 C. Pack sizes available: 5L Touch dry: 1 18 C Mark Proof: 3 18 C Packing/Stacking: 48 hours minimum Coverage: 40m 2 per 5 litres 2 coats of PU Sealer at 100g/m 2 per coat, followed by 2 coats Wet Look PU Lacquer at g/m 2 per coat 6991/ % Sheen 6CAT/99 Catalyst 6007/000 Standard PU Thinner UHS 2 PACK SEALER Use UHS 2 Pack Sealer 5004/900, with 90% solids, when full gloss mirror It can be sprayed through normal cup guns and provides in 2 coats a life hours. 5004/900 can be used to reduce VOC emissions and is an alternative to polyester basecoats. Pack sizes available: 5kg Catalyst sizes: 500ML Gel Coat recoatable: C Sandable: C Coverage: 20m 2 per 5 litres 2-3 coats at g/m 2 per coat, under clear wet-look lacquers. 5004/900 Clear UHS Sealer 5CAT/900 UHS Catalyst X001 Fast Thinners INTERIOR COATINGS 30 For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website

31 CLEAR POLYURETHANE LACQUERS PERFECTA GLOSS BURNISHING perfecta is used on clear and coloured gloss is required. It s a very fast, easy-to-use burnishing kit for high gloss kitchens, bathrooms, Please consult Morrells Technical Support Team or your Morrells Business Manager for more information and demonstrations.

32 FASTMATCH POLYURETHANE COLOURS POLYURETHANE TOPCOATS UHS 2 PACK PRIMERS rapid drying, high covering power and good anti-sag properties. Catalysed at 3:2 by volume, this product has a usable pot life of 2 hours at 18 C. Pack sizes available: 5kg Catalyst size: 2.5L Touch dry: C Sandable: C Recoatable: minutes 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 1-3 coats at 75g/m 2 per coat applied coat-on-coat or over PU Primer 6005/600 Product codes (white): 6905/550 90% Sheen 6505/550 50% Sheen 6305/550 30% Sheen 6205/550 20% Sheen 6105/550 10% Sheen 6CAT/NY3 Non-Yellowing Catalyst 6007/000 Standard PU Thinner be sprayed through normal cup guns and provide in 2 coats a completely hours. They are also used to reduce VOC emissions and are an alternative to polyester systems. Pack sizes available: 5kg Catalyst sizes: 500ML Gel Coat recoatable: C Sandable: C Coverage: 20m 2 per 5 kilos Tinting: Use Morrells Light Fast Stains up to a maximum of 5% (after catalysis) 2-3 coats at g/m 2 per coat, under Fastmatch wet look PU colours. 5005/900 White UHS Primer 5006/900 Black UHS Primer 5004/900 Clear UHS Sealer 5CAT/900 UHS Catalyst X001 Fast Thinners INTERIOR COATINGS 32

33 FASTMATCH POLYURETHANE COLOURS WET-LOOK POLYURETHANE TOPCOAT A 100% gloss polyurethane with excellent durability, used on high quality wooden furniture which can be burnished post cure. Catalysed at 1:1 this product has a usable pot life of 2 hours at 18 C. Pack sizes available: 5kg Catalyst size: 5kg Available in all BS,RAL NCS colours plus any customer bespoke colour. Touch dry: 1 18 C Mark-proof: 3 18 C Packing/Stacking: 48 hours minimum Coverage: 40m 2 per 5 litres 1-3 coats at 75g/m 2 per coat applied coat-on-coat or over PU Primer 6005/600 or over UHS 2 Pack Primer 5005/900 Product codes (white): 6995/ % Gloss 6CAT/99 Catalyst 6007/200 Slow PU Thinner

34 VELVETONE POLYURETHANE TOPCOAT soft feel effect. Available in most colours including BS/RAL/NCS/Pantone excellent scratch and water resistance. Meets the requirements of BS (FIRA Std) 6250 for horizontal surfaces (excluding kitchen worktops) in General colours as opposed to bright vibrant tones the appearance is similar to a 6V/******** VELVETONE POLYURETHANE TOPCOAT Mixing Guidelines by weight Topcoat 100%, 6CAT/52 Catalyst 40%, 6007/000 Thinner 10-30% Pot life: 2 20 C Touch dry: C Sandable: C Recoatable: C Handling: 4 18 C Packing: Overnight minimum 6007/000: Standard PU Thinner Coverage: 40m 2 per 5L Typical Pigmented Finish: 2 coats at 95g/m-2 per coat (Dry Film Thickness ~ 6005/660 or 6005/760 PU Primer) 1 coat Velvetone Topcoat at 100g/m2 per coat For Clear finishes the PU Primer should be replaced with 6004/460 PU Basecoat Sand between coats with 240 or 320 grit paper Pack sizes available: 5kg Catalyst size: 2.5L

35 WHITE POLYURETHANE PRIMERS Very fast drying, easy sand primers with good covering power. Designed for spraying MDF and interior wooden substrates, with a pot life of 2 hours at 18 C. 6005/660 - WHITE POLYURETHANE PRIMER Catalyst: 6CAT/30 Mix ratio: 3: 2 by volume Touch dry: C Sandable: C Recoatable: C 6007/000: Standard PU Thinner Coverage: 40m 2 per 5L Pack sizes available: 5kg Catalyst size: 2.5L 6005/700 - WHITE HIGH SOLIDS POLYURETHANE PRIMER Catalyst: 6CAT/32 Mix ratio: 4:3 by volume Touch dry: C Sandable: C Recoatable: C 6007/000: Standard PU Thinner Coverage: 40m 2 per 5L Pack sizes available: 5kg. Catalyst size: 5L

36 CLEAR POLYESTER LACQUERS 5004/790 - CLEAR POLYESTER BASECOAT/LACQUER A high build 98% solids, sprayable clear waxed polyester basecoat/lacquer can be burnished to a deep 100% gloss mirror shine. Suitable for pianos, car dashboards, luxury yacht interiors, roulette wheels, kitchen and bathroom furniture, musical instruments, high-end Pack sizes available: 25kg Peroxide Hardener pack size: 1kg Cobalt Accelorator pack size: 1kg Mixing ratios: Polyester 5004/790: Accelerator 5004/790/1: Hardener 5004/790/2: Thinner 5007/790: 100 parts by weight 2 parts by weight 2 parts by weight as required POLYESTER ISOLATOR PART A 5001/700, PART B 6CAT/99 A clear 2 pack polyurethane barrier coat for use when exotic timbers are being coated. This product is designed to prevent the natural oil extractives from affecting Pack size available: Part A 5kg, Part B 5kg Mixing ratio: 1: 1 Pot life: 4 hours Touch dry: 2 18 C Recoatable: C Sandable: C Coverage: 40m2 per 5 80g/m2 Morrells Polyester can be tinted to any colour. Please refer to Morrells Technical Support Department. INTERIOR COATINGS Gel Time: C Recoatable: C Touch dry: C Mark proof: C Packing: 16 hours 18 C Sanding: C Burnishing: 3 days 18 C Coverage: m 2 per 300g/m 2 Pot life: minutes 2, 4 coats 5004/790 at 300g/m 2 36 For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website

37

38

39 ARCHITECTURAL COATINGS ARCHITECTURAL COATINGS 39

40 XEROFIRE UPGRADING FIRE-RETARDANT WOOD FINISHES is the high-performance furniture grade lacquer system that will Class 1, and also achieve top rating (Euro Class B-s1,d0) in the European Fire Standard EN on all wood substrates including veneered plywood. In addition, is extremely durable ( FIRA Standard Severe Use). paragraph 13 of Approved Document B Fire Safety to the Building Class B-s1,d0 4th November 2013 by Exova Warrington *BS 476: Part 6: A1: Method of test for Propagation of Products - Report Number: issued 25th April 2012 by Exova Warrington. Report Number: issued 25th April 2012 by Exova Warrington. The system also achieves the minimum requirements of FIRA Standard 6250 Horizontal Surfaces Severe Use. Beware of Fire-Retardant Construction contracts which specify Building Regulation Fire Safety Standards 7XIS/127 - XEROFIRE ISOLATOR A 1 pack clear barriercoat designed to isolate timber extractives. Touch dry: C Sandable: C Recoatable: C Coverage: 5-6m 2 per litre 7XBA/800 - XEROFIRE BASE PART A 7XBB/400 - XEROFIRE BASE PART B A 2 pack waterborne intumescent basecoat designed to retard the. Touch dry: C Sandable: Overnight Recoatable: C Coverage: Up to 6m 2 per litre Mixing: 2 Part A with 1 PART B ARCHITECTURAL COATINGS has been used in a few well known places Jamie s Italian Restaurants, Starbucks, Manchester City FC, Tottenham Hotspur FC, Birmingham Library, Heathrow T4 & T5, The National Theatre, Frankie & Barge. 40

41 XEROFIRE FIRE-RETARDANT WOOD FINISHES XEROFIRE CLEAR A 2 pack acid-catalyst furniture grade lacquer with FIRA6250 Severe Use properties. Touch dry: C Recoatable: NA, one coat only Packing: 24 hours Coverage: Up to 15m 2 per litre Mixing: 9 parts lacquer to 1 part catalyst ( 24 hour pot-life ) 7X91/457 90% Gloss 7X53/457 50% Gloss 7X43/457 40% Gloss 7X33/457 30% Gloss 7X23/457 20% Gloss 7X13/457 10% Gloss 7CAT/457 Catalyst surface area to be coated and the quantity of product supplied.

42 CLASOLAC FIRE-RETARDANT ACID CATALYST LACQUERS A quick drying, high build acid catalyst lacquer designed for manual or automatic spray application. clasolac maintains the substrate rating and does not upgrade it. Always seek technical information before project commencement. clasolac meets the requirements of BS 476: Part 6: 1989 & Part 7: 1997 Compliance with the Requirements for Class 1 & Class 0 Surfaces (as applied on rated MDF* Meets the requirements of FIRA Standard 6250: Horizontal surfaces (excluding kitchen worktops) - Severe Use. Veneer Treatment: Morrells recommends the use of N5 Salt Solution to with 180 grit paper prior to the application of N5 Solution. N5 can be brush or spray applied at a rate of ~80 g/m2 and left 24 hours at 18 C to dry. N5 has an alkaline ph and may cause veneer discolouration, especially on lightcoloured timbers. Always prepare a test panel to determine whether the level of discolouration is acceptable. When dry, the treated veneer should be lightly de-nibbed to remove excess salt residue. If staining is required, always apply the stain before the N5 Solution. Lacquers of this type achieve their full resistance properties after approximately 21 days drying depending in conditions, although careful use is possible before this period. Application methods and coating weights are also factors which will also application maintains the required Fire Retardant rating. Under normal conditions these products will have a workable pot-life of 36 hours after catalysis. clasolac Fire Retardant lacquers are also available in Fastmatch colours (BS, RAL, NCS etc). Fastmatch from Morrells is the foundation for all our customers colour matching requirements. 100,000 colours at the touch of a button and a shake of a tin! Fastmatch is available in Acid Catalyst, Precatalyst, Polyurethane, Waterborne, Fire-retardant and Patina stains through Morrells Branch Network across the UK and Ireland. Alternatively, specials are formulated, manufactured and quality controlled at our headquarters in Woodley, then given a unique production matching team at Woodley tint thousands of specials for customers every year, and are dedicated to the highest standards of quality. ARCHITECTURAL COATINGS * The user should consider the Fire Retardant Accreditation for this product range as a guideline only. BS 476 Parts 6 & 7 (the Method to test Fire Propagation and the Surface Spread of Flame test respectively) of substrate, adhesive, veneer, salt solution and coating, and not just the coating. 42 For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website

43 CLASOLAC FIRE-RETARDANT ACID CATALYST LACQUERS CLASOLAC FIRE-RETARDANT ACID CATALYST LACQUERS Touch dry: C Sandable: 1 18 C Recoatable: 2 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres 2 coats 75g/m 2 per coat applied coat-on-coat 5901/457 90% Sheen ( use 5CAT/200 ) 5503/457 50% Sheen 5403/457 40% Sheen 5303/457 30% Sheen 5203/457 20% Sheen 5103/457 10% Sheen 5CAT/100 Catalyst 5007/457 Thinners R003 N5 Solution

44 OMNIA EXTERIOR JOINERY COATINGS lashing rain, intense uv rays and damaging rot attack. omnia is the modern solution a true breakthrough in aqueous polymer technology. omnia by Morrells offers many years of protection against the elements as long as timber selection, preparation and design meet TWA scheme criteria and requirement standards, and the application of the coatings are in Very exposed or coastal locations can reduce the longevity of all exterior coatings. For this reason annual inspections and maintenance must be carried out with the omnia maintain range of products. starting any new project.

45 OMNIA EXTERIOR JOINERY COATINGS OMNIA PRESERVE the structure of the wood and actively control discolouration. omnia preserve is formulated to provide surface protection against rot and fungal attack meeting BS335 Hazard Classes 2 & 3. omnia preserve is a completely clear liquid and is also available in 9 standard wood stain colours. Pack sizes available: 5L and 25L Touch dry: C Recoatable: C Packing: Overnight Coverage: 70m 2 per 5 litres 8PR/000 Clear 8PR/001 Antique Pine 8PR/002 Light Oak 8PR/003 Teak 8PR/004 Natural Mahogany 8PR/005 Dark Mahogany 8PR/006 Rosewood 8PR/007 Walnut 8PR/008 Dark Oak 8PR/009 Jacobean OMNIA CLEAR A unique clear acrylic polyurethane topcoat with hybrid-microporous technology and UV diffusers giving unrivalled weather resistance. The structure of the wood is actually protected from long term UV damage. Available in Semi-matt 30% sheen or 60% gloss. A vacuum-coat version is also available for linear mass production. Pack sizes available: 4.6L and 23L Touch dry: C Recoatable: C Packing: Overnight Coverage: 20m 2 per 5 litres Spray application of 2 full 300 microns wet over timber pretreated with omnia preserve will give full protection. 8C3/000 Clear 30% Sheen 8C6/000 Clear 60% Sheen 8LVC3/000 Clear Vacuum-coat 30% sheen 8LVC6/000 Clear Vacuum-coat 60% sheen Use omnia end grain sealer 8ES/000 on all exposed end grain. Application. For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website 45 ARCHITECTURAL COATINGS

46 OMNIA EXTERIOR JOINERY COATINGS - COLOURS OMNIA PRIME A high build fast-dry waterborne white primer with excellent covering power and easy sanding. This product locks-in the staining effects of tropical hardwoods and other timbers rich in tannin and natural extractives. omnia knotting (3032/000) and omnia preserve (8PR/000) should be used on softwoods prior to priming. A vacuum-coat version is also available for linear mass production. Also available in cream and light grey. Pack sizes available: 5L and 20L Touch dry: C Sandable: C Recoatable: 24 hours 18 C Packing: Overnight minimum Coverage: Approx 20m 2 per 5 litres dependent upon the size, orientation and surface quality of the item Spray application of 1 or 2 coats to 150 microns wet per coat will afford a Use omnia end grain sealer 8ES/000 on all exposed end grain. OMNIA WHITE & COLOURS A high opacity waterborne acrylic polyurethane topcoat with an ultra- Pack sizes available: 4.6L and 23L Available in white plus all BS, RAL & NCS or customer bespoke colours in semi-matt 30% or 60% gloss sheens. A vacuum-coat version is also available for linear mass production. Pack sizes available: 4.6L and 23L Touch dry: C Sandable: C Recoatable: C Packing: Overnight minimum Coverage: Approx 20m 2 per 5 litres dependent upon the size, orientation and surface quality of the item Spray application of 2 coats at 300 microns wet will afford full protection. ARCHITECTURAL COATINGS 8JP/000 8LVJP/000 White Primer Vacuum coat White Primer 8W3/000 White 30% sheen topcoat 8W6/000 White 60% sheen topcoat 8LVW3/000 Vacuum coat White 30% sheen topcoat 8LVW6/000 Vacuum coat White 60% sheen topcoat For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website

47 OMNIA EXTERIOR JOINERY COATINGS Morrells waterborne joinery coatings are manufactured to be water repellent, flexible to expand and contract with the natural movement of timber, and provide long-term durability. They also allow the natural passage of moisture vapour, which improves the stability of joinery. We provide specialised practical and technical support to the Joinery Industry so please ask for additional advice on any matter concerning joinery finishing. Our services include inspection surveys, product demonstrations, specification writing, maintenance advice, wet samples, operator training, colour matching, and a free delivery service from Morrells national branch network. Please consult Morrells omnia brochure & joinery guide For further information

48 INDURO FLOOR COATINGS induro with a deep natural colouration and extreme resistance to wear. induro Salmonella, Listeria and other harmful bacteria. induro is available nationwide through Morrells vast network of branches, trade counters and appointed specialist distributors. INDURO GP SEAL 8GP/304 This state of the art wood warming waterborne sealer is formulated to Use with induro excellent clarity and strong chemical/mechanical resistance. Pack size available: 5L Touch dry: 2 18 C Recoatable: 2 18 C Coverage: 40m 2 per 5 litres Floor staining - use Morrells light-fast or classique stains - see page Pack size available: 5L Touch dry: C Recoatable: C Coverage: 40m 2 per 5 litres INDURO XL1 CLEAR 1 PACK WATERBORNE ANTI-BACTERIAL FLOOR LACQUER A single pack, highly durable, fast drying clear lacquer with excellent clarity and non-yellowing properties. This self levelling lacquer is ready for use straight from the bottle and is resistant to abrasion, scuffs and spillage. XL1 has been designed to be used on all solid and engineered wood Pack sizes available: 5L Touch dry: C Sandable: C Recoatable: 2-3 hours 18 C C Fully Hard: C Coverage: 4 40 sq.metres /5 litre ARCHITECTURAL COATINGS INDURO ISO SEAL 3EX/154 This product is formulated from quality shellacs to produce a fast timbers such as tropical hardwoods to seal in and isolate contaminants such as oils and waxes. 48 XL1-90 XL1-50 XL1-30 XL1-10 NATRO Gloss 90% Sheen Semi-gloss 50% Sheen Semi-matt 30% Sheen Matt 10% Sheen 0% Dead-matt

49 INDURO FLOOR COATINGS INDURO XL2 CLEAR 2 PACK WA TERBORNE ANTI-MICROBIAL FLOOR LACQUER natural clarity, non-yellowing properties and its scuff resistance. This product is in scope 2004/42/EC. Pack sizes available: 5L Touch dry: C Sandable: C Recoatable: 2-3 hours 18 C C Fully Hard: C Coverage: 4 40 sq.metres /5 litre XL2-90 XL2-50 XL2-30 XL2-10 8CAT/XL2 Gloss 90% Sheen Semi-gloss 50% Sheen Semi-satin 30% Sheen Matt 10% Sheen Catalyst

50 INDURO FLOOR COATINGS INDURO SPORT 2 PACK WATERBORNE FLOOR LACQUER induro SPORT is a tough resilient coating especially formulated to be used BS EN dry slip resistance, induro Sport meets international standards for multi-sport use. induro SPORT has excellent resistance to scuffs and marks, and also has added anti-microbial protection. Pack sizes available: 5L Touch dry: C Recoatable: 2 18 C C Fully Hard: C Coverage: 4 40 sq.metres /5 litrees SPORT-90 Gloss 90% Sheen SPORT-50 Semi-gloss 50% Sheen SPORT-30 Semi-matt 30% Sheen SPORT-10 Matt 10% Sheen 8CAT/SP Catalyst INDURO XLA ANTI-SLIP 2 PACK WATERBORNE FLOOR LACQUER induro XLA ANTI-SLIP meets wet slip accreditation BS Designed to reduce slip potential in bars, clubs, hospitals, schools, induro XLA ANTI- SLIP also has anti-bacterial protection. Pack sizes available: 5L Touch dry: C Sandable: C Recoatable: 2-3 hours 18 C C Fully Hard: C Coverage: 4 40 sq.metres /5 litre XLA-10 Matt 10% Sheen XLA-30 Semi-Matt 30% Sheen XLA-50 Satin 50% Sheen 8CAT/XLA Catalyst ARCHITECTURAL COATINGS The drying and usage times quoted are typical times under normal conditions. The actual times may vary dependent on substrate porosity, induro MRSA, Salmonella, Listeria and other harmful bacteria. induro XL ranges meet BS7044 (Part 4) 1990 for slip resistance. obtained from the individual Product Data Sheets and the induro Flooring Finishing Guide. 50

51 INDURO FLOOR COATINGS INDURO XLO NATURAL PARQUET OILS These oils are formulated on a blend of natural oils in combination with induro oils can be tinted to any liquid sample colour, simply contact your local Morrells branch. Minimum order 20 litres. Pack sizes available: 5L Touch dry/recoat: C XL0-10 Matt Sheen XLO-30 Semi-matt Sheen INDURO FLOOR MAINTENANCE PRODUCTS stubborn marks or diluted 5:1 with water for general cleaning. Touch dry/recoat: C Careful Use: 1 Hour Full cure: 24 hours 8CL/000 GP CLEANSE 8RE/131 XL REVIVE 8RE/133 XL REVIVE 7RE/251 XLO REVIVE 8RE/131 XL REVIVE 7RE/251 XLO REVIVE 8RE/131 XL REVIVE 7RE/251 XLO REVIVE

52 MEDICOTE ANTI-MICROBIAL FURNITURE LACQUERS MEDICOTE ACID CATALYST LACQUERS MEDICOTE WATERBORNE LACQUERS ARCHITECTURAL COATINGS A very fast drying high build 2 pack lacquer formulated to include an agent that stops bacteria surviving on its surface. 448 medicote will prevent the spread of Staphylococcus aureus (MRSA), Escherichia coli 015 (e.coli), Salmonella enteritidis, Bacillus cereus (food poisoning) and other bacteria with a kill rate of 99% within 24 hours. (Accredited by Law laboratories ref 05H547). medicote also reduces the risk of deterioration, discolouration and odours caused by micro-organisms. Meets the requirements of FIRA Standard 6250: 2005 for horizontal surfaces (excluding kitchen worktops) and rated as Heavy/Severe Use. Pack sizes available: 5L and 25L Catalyst sizes available: 500ML and 2.5L Touch dry: C Sandable: C Recoatable: 1 18 C Packing: Overnight minimum Coverage: 40m 2 per 5 litres Tinting: Use Morrells Light Fast Stains up to a maximum of 5% 5901/448 90% Sheen 5503/448 50% Sheen 5403/448 40% Sheen 5303/448 30% Sheen 5203/448 20% Sheen 5103/448 10% Sheen 5CAT/200 Catalyst 2007/900 Thinners 52 This range of lacquers is protected against the growth of micro-organisms (such as MRSA, E.coli, A. niger) on their surface, with a kill rate of 99% within micro-organisms, is greatly reduced through the use of anti-microbial agents in the lacquers. The use of medicote lacquer is not a replacement or substitute for proper hygiene and cleaning. This range offers similar performance and properties as a high quality acid-catalyst lacquer. It is in Heavy/Severe Use and BS 6222, Part 3 Domestic Kitchen Equipment Finish Performance, Other Surfaces. Recommended for use as a coat-oncoat system. Touch dry: C Sandable: Recoatable: 1.5 hours 18 C Packing: Overnight minimum, dependent on conditions. Coverage: Approximately 40m2 per 5Lts dependent upon the size, orientation and surface quality of the item being coated Typical Finish: per coat) 8901/ % Sheen 8303/318 30% Sheen 8503/318 50% Sheen 8203/318 20% Sheen 8403/318 40% Sheen 8103/318 10% Sheen For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website

53 MEDICOTE ANTI-MICROBIAL FURNITURE LACQUERS MEDICOTE UV-CURED LACQUERS the growth of micro-organisms (such as MRSA, E.coli, A. niger) on their surface, with a kill rate of 99% within 24 hours. The risk of deterioration reduced through the use of anti-microbial agents in these lacquers. The use of medicote lacquers is not a replacement or substitute for proper hygiene and cleaning. These products offer supreme chemical and physical roller coaters operating in either forward or reverse mode. These lacquers are supplied ready-for-use and can be cured by means of UV light, utilising medium pressure mercury lamps (Hg) with an output of 80w/cm or higher. The maximum curing speed will depend on the condition of the line and the total energy output of the lamps against line speed. Coverage: Typical Finish: U6441/048 40% Sheen U6241/048 20% Sheen With typical coating weights of 6 15 gm-2, coverage of these materials can range between m2 per litre 2 3 coats at gm-2, 1 coat at 6 10 gm-2

54 HOLZOL ADVANCED NATURAL OILS With the growing demand for timber and materials from renewable sources, and joinery are becoming even more popular. For centuries wood has been oiled for appearance and protection purposes. In recent years Northern European coatings manufacturers have developed oil based coatings to improve timber longevity and the appearance. Now Morrells, with its new level. holzol, a technically advanced range of oils, blends plant based ingredients with hybrid natural resins to achieve truly outstanding performance. holzol actually feeds and nourishes lignum, coating the molecular internal structure of timber, thereby providing an unsurpassed level of protection. The real beauty of holzol however is its universal appeal anyone can use holzol is so easy to apply, and because it seeps deep into the pores of the wood, it always gives a pleasing just- The holzol range of advanced technology natural wood oils compliments Morrells growing range of environment friendly coatings. Improved touchdry and hard-dry times are a hallmark of the range, as is durability, with impressive resistance to abrasion, wet-heat, chemical attack and impact. holzol Clear UV Floor-Oil for mass production factory application fully cures

55 HOLZOL - COLOUR CHART FURNITURE-OIL FLOOR-OIL WEATHER-OIL WEATHER-STAIN DECK-OIL WHITE OAK WHITE OAK WHITE IVORY TEAK OAK TEAK OAK TEAK MAHOGANY WALNUT GREY GREEN BLUE WALNUT MAHOGANY WALNUT LARCH GREY IVORY Available in 10% Matte & 30% Satin CHERRY HONEY Available in 10% Matte & 30% Satin GREY CEDAR Available in 30% Satin EBONY GREY CEDAR GREEN Available in 30% Satin

56 HOLZOL ADVANCED NATURAL OILS HOLZOL FURNITURE-OIL HOLZOL WORKTOP-OIL A blend of natural oils, hybrid resins and micronised waxes to enhance the intrinsic beauty of all timber surfaces. Water and dirt repellent, soft to the touch yet supremely durable. Suitable for all domestic and commercial furniture. Also available in a soft-feel, dead matte Waxy-oil. A food-safe, fast drying natural oil with a pleasant bouquet, designed to penetrate solid wood worktops and kitchen/bathroom surfaces. High resistance to scratching, staining (E.g. alcohol, coffee, cola, fruit juice), easy to clean and to restore. Coverage: Dry and overcoat: Safety: Packaging: 12-28m 2 /litre brush or soft cloth 6-8 hours ( sand if required grit ) hard dry Conforms to EN71-3:2013, 2004/42/EC in Scope, dispose used rags immediately in water 1 litre 2.5 litre Coverage: Dry and overcoat: Safety: Packaging: 12-28m 2 /litre brush or soft cloth 6-8 hours ( sand if required grit ) hard dry Conforms to EN71-3:2013, 2004/42/EC in Scope, and Food safe Euro-norm 1186, dispose used rags immediately in water 1 litre HOLZOL QUICK-OIL HOLZOL FLOOR-OIL ARCHITECTURAL COATINGS A fast drying natural oil/resin formulation for site work and painting contractors. Water & dirt repellant, extremely durable and easy to apply. Suitable for bar work, counters, panelling, architrave etc. Coverage: Dry and overcoat: Safety: Packaging: 12-28m 2 /litre brush or soft cloth 6-8 hours ( sand if required grit ) hard dry Conforms to EN71-3:2013, 2004/42/EC in Scope, dispose used rags immediately in water 2.5 litre For individual Product Data Sheets and Health & Safety Data Sheets visit Morrells website 56 anti-slip Floor-Oil and a UV cured Floor-Oil for mass production, are also available. Coverage: Dry and overcoat: Safety: Packaging: 12-28m 2 /litre brush, roller or T bar 6-8 hours ( sand if required grit ) hard dry Conforms to EN71-3:2013, 2004/42/EC in Scope, dispose used rags immediately in water 1 litre 2.5 litre

57 HOLZOL ADVANCED NATURAL OILS HOLZOL WEATHER-OIL A high opacity micro-porous range of coloured oils designed for exterior weather protection. Suitable for timber cladding, doors and windows, conservatories, and garden furniture. Also available is holzol Weather-stain in translucent colours to order. Coverage: 12-28m 2 /litre brush or roller Dry and overcoat: Durability: Weather-o-metre tested to BSEN Safety: 2004/42/EC in Scope, dispose used rags immediately in water Packaging: 1 litre 2.5 litre HOLZOL DECK-OIL from turning grey, and makes it appear alive and vibrant in tone. Coverage: 12-28m 2 /litre brush or roller Dry and overcoat: Durability: Weather-o-metre tested to BSEN Safety: 2004/42/EC in Scope, dispose used rags immediately in water Packaging: 2.5 litre

58 NOTES

59 NOTES

60 UK & Eire Branches: Morrellsls Basildon tel: fax: Morrells Birmingham tel: fax: Morrells Brighton tel: fax: Morrells Bristol tel: fax: Morrells Cardiff tel: fax: Morrells Dublin tel: fax: Morrells East London tel: fax: Morrells Exeter tel: fax: Morrells Gateshead tel: fax: Morrells ls Glasgow tel: fax: Morrells High Wycombe tel: fax: Morrells Hull tel: fax: Morrells Ipswich tel: fax: Morrells Leeds tel: fax: Morrells Leicester tel: fax: Morrells Letchworth tel: fax: Morrells Middlesbrough tel: fax: Morrells North London tel: fax: Morrells Nottingham tel: fax: Morrells Peterborough tel: fax: Morrells Preston tel: fax: Morrells Sittingbourne tel: fax: Morrells South London tel: fax: Morrells Southampton tel: fax: Morrells tel: fax: Morrells Swindon tel: fax: Morrells Tra ffo rd Park tel: fax: Morrells Warrington tel: fax: Morrells Belfast (DF Ross) tel: fax: Morrells Liverpool (Northwest Coatings) tel: fax: Morrells North Yorkshi re (Rydenor) tel: fax: