Event Monitoring Setup
|
|
- Agnes Hudson
- 6 years ago
- Views:
Transcription
1 Event Monitoring Setup There are two steps to configure Event Monitoring within exacqvision. First, a profile needs to be created and defined. Then, the profile is activated and assigned to a particular video panel. In addition, there are two unique modes of operation used in Event Monitoring. Event Acknowledge Mode brings up a list of events which the user can click on to view. Virtual Matrix Mode automatically shows video as it is triggered. This document will go over the various steps involved to create profiles and then activate them in both modes. 1. Click on the Configuration button. 2. Click on Event Monitor 3. Click the New button on the right side of the page under Profiles Page 1 of 6
2 4. Give the profile a name and a description. A profile is a set of actions (e.g. the playing of live video or an alarm sound) triggered by sources such as video motion, input triggers, etc. Each profile can be activated and assigned to a specific video panel by the user. Optionally, you can create a brief description of your profile. Use the radial buttons next to the Type: option to choose either a Virtual Matrix or Event Monitor Mode. 5. At this point, do not click on the Apply button. You still need to create an event or events for your profile. 6. Create an Event that you wish to monitor. If you are familiar with exacqvision s Event Linking feature, this should look familiar to you. o In the Event Type box, click once on Video Motion. It will now be highlighted (the color depends on your personal Windows settings). o The next box, Event Source, allows you to choose a camera from which to monitor video. Choose a camera from the list by clicking on it once. Page 2 of 6
3 o The Action Type and the Action Target are set by default to show the video clip in the matrix display whenever motion is detected on the camera. 7. To add another camera to this profile click on the other New button located at the bottom of the page. o Repeat the event linking process by clicking on Video Motion under Event Type and then selecting another camera from the Event Source box. You can repeat this process to add additional cameras to the profile. 8. Click the Apply button on the upper right after you have added another camera. o You have now created a profile that will utilize Event Monitoring. Page 3 of 6
4 9. Click on the Live Video button at the top left and choose a 2 by 2 screen. 10. Right click in the top left frame, choose Event Monitor and select the first profile you created. o At this point, an orange border will appear around the video panel and you will probably not have any video in the panel until an event triggers. o Also, the Event Monitor Box will appear just below this panel. You can move it and resize it as you need. Once a video event takes place, it will be automatically listed in the box. Page 4 of 6
5 11. Right click in the upper right frame, choose Event Monitor and select the second profile you created. An orange border will appear 12. As motion is triggered on the cameras, it will trigger event monitoring. An orange border will appear around the video panel but the Event Monitor box will not appear as you are in Virtual Matrix Mode. 13. On the left frame (using Event Acknowledge Mode), a list should start to form listing all of the motion events. 14. Clicking on the event line will switch the video to that camera. 15. Clicking on the small blue rewind button will replay the event as it was tripped. 16. The small red X acknowledges the event and removes it from the list. Page 5 of 6
6 17. The right frame (in Virtual Matrix Mode) does not create a list or request acknowledgment. Instead, it switches between cameras and pops them into the frame as motion occurs. This makes it easy to follow a string of events occurring on multiple cameras as Jim was able to demonstrate in the Event Monitoring video which can be scene here: As always, if you have questions or require technical support, please contact Brian Clark at support@exacq.com or ext Page 6 of 6
High Point Communications Authorized dealer for USA Fleet Services
Summary of Display Features Idle Alert - Idle alerts can be sent every 10 minutes (up to 60 minutes) Stop Duration Alert Stop Duration alerts can be sent every 10 minutes (up to 60 minutes), after 24 hours,
More informationRegister and validate Step 1
User guide Soccer Content Getting the license key System Overview Getting started Connecting your Equipment Setting up your System Building up your variable set Ready for Capturing How to do a video analyze
More informationFLEXLINK DESIGN TOOL VR GUIDE. documentation
FLEXLINK DESIGN TOOL VR GUIDE User documentation Contents CONTENTS... 1 REQUIREMENTS... 3 SETUP... 4 SUPPORTED FILE TYPES... 5 CONTROLS... 6 EXPERIENCE 3D VIEW... 9 EXPERIENCE VIRTUAL REALITY... 10 Requirements
More informationSCP: Containment Breach Map Creator Version 2.1 Manual. 1. Startup 2. How to build a map 3. 3D viewer options 4. 3D viewer controls
SCP: Containment Breach Map Creator Version 2.1 Manual 1. Startup 2. How to build a map 3. 3D viewer options 4. 3D viewer controls 1. Startup After starting the map creator you have the choice to either
More informationMotion Blur with Mental Ray
Motion Blur with Mental Ray In this tutorial we are going to take a look at the settings and what they do for us in using Motion Blur with the Mental Ray renderer that comes with 3D Studio. For this little
More informationEntering Checkpoint Data
Entering Checkpoint Data How do I change which Checkpoint Period I m viewing? To change the period from one to another, here are the steps: On the right side of the screen, click the grey drop-down "Change
More informationElectronic Signature. July 2, 2018
Electronic Signature July 2, 2018 Webinar Purpose To enable Signatories to set up their electronic signature information and sign contracts electronically in CalUsource. Who can use it? Good news! Both
More informationTable of Contents. Creating Your First Project 4. Enhancing Your Slides 8. Adding Interactivity 12. Recording a Software Simulation 19
Table of Contents Creating Your First Project 4 Enhancing Your Slides 8 Adding Interactivity 12 Recording a Software Simulation 19 Inserting a Quiz 24 Publishing Your Course 32 More Great Features to Learn
More informationServoDMX OPERATING MANUAL. Check your firmware version. This manual will always refer to the most recent version.
ServoDMX OPERATING MANUAL Check your firmware version. This manual will always refer to the most recent version. WORK IN PROGRESS DO NOT PRINT We ll be adding to this over the next few days www.frightideas.com
More informationDemo. Getting Started with Alice Demo
Getting Started with Alice Demo Demo This is a fast paced beginner demo to illustrate many concepts in Alice to get you started on building an Alice world This demo includes setting up and moving objects,
More informationSection Table of Contents: Section 16.0
Section 16.0 Table of Contents: Section 16.0 Overview - Section 16.0... 16.0-3 Plotting Single Sheets... 16.0-3 Publishing... 16.0-5 Creating DWFs or PDFs (with Sheet Sets)... 16.0-6 Overview - Section
More informationResize images for either 1400 or 1050 dpi for competitions.
Resize images for either 1400 or 1050 dpi for competitions. 1. I suggest the first thing we do is provide a folder for the resized images, somewhere on your computer where you are going to keep all your
More informationHow to Resize Digital Images for Projection to 1600px by 1200px
How to Resize Digital Images for Projection to 1600px by 1200px How to resize an image using Photoshop Elements. (Other software will have similar ways to resize.) Start with an original file that is too
More informationVeco User Guides. Property Photos & Images
Introduction Veco User Guides Property Photos & Images Veco-onesystem allows images to be attached to each property. Once recorded against each property, these images can be categorised into order of priority
More informationChapter 6 Experiments
72 Chapter 6 Experiments The chapter reports on a series of simulations experiments showing how behavior and environment influence each other, from local interactions between individuals and other elements
More informationPhoto Story Tutorial
Photo Story Tutorial To create a new Photo Story Project: 1. Start 2. Programs 3. Photo Story 4. Begin a New Story 5. Next 6. Import Pictures 7. Click on your Flash Drive s name from the window on the
More informationII. Color Policies. ChromaBlast-R Setup & Print Guide Printing an Image With The. ChromaBlast-R Ricoh GX7000 System Requirements
ChromaBlast-R Setup & Print Guide Printing an Image With The Ricoh Aficio gx7000 gelsprinter I. Make sure your system has the minimum specified requirements. II. Set Color Policies In CorelDraw versions
More informationThe original image. Let s get started! The final result.
Miniature Effect With Tilt-Shift In Photoshop CS6 In this tutorial, we ll learn how to create a miniature effect in Photoshop CS6 using its brand new Tilt-Shift blur filter. Tilt-shift camera lenses are
More informationADOBE 9A Adobe(R) Photoshop CS4 ACE. Download Full Version :
ADOBE 9A0-094 Adobe(R) Photoshop CS4 ACE Download Full Version : https://killexams.com/pass4sure/exam-detail/9a0-094 QUESTION: 108 When saving images in Camera Raw, which file format allows you to turn
More informationA Quick Spin on Autodesk Revit Building
11/28/2005-3:00 pm - 4:30 pm Room:Americas Seminar [Lab] (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida A Quick Spin on Autodesk Revit Building Amy Fietkau - Autodesk and John Jansen;
More informationArchicad Layout of Drawings
Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings
More informationYou can easily print images using the Capture NX print function. Here we will explain the process for printing
Printing - Print Size Request How do you print images to fit on particular paper sizes. Response You can easily print images using the Capture NX print function. Here we will explain the process for printing
More information4 PHOTOSHOP SPECIAL EFFECTS HACKS FROM SCOTT KELBY
4 PHOTOSHOP SPECIAL EFFECTS HACKS FROM SCOTT KELBY You can do some pretty cool stuff in Photoshop, with most tiny tweaks taking no time at all. However, for some of us (myself included) it s hard to know
More informationCOPYRIGHTED MATERIAL CREATE A BUTTON SYMBOL
CREATE A BUTTON SYMBOL A button can be any object or drawing, such as a simple geometric shape.you can draw a new object with the Flash drawing tools, or you can use an imported graphic as a button.a button
More informationArchicad Layout of Drawings
Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings
More informationThe purpose of this document is to help users create their own TimeSplitters Future Perfect maps. It is designed as a brief overview for beginners.
MAP MAKER GUIDE 2005 Free Radical Design Ltd. "TimeSplitters", "TimeSplitters Future Perfect", "Free Radical Design" and all associated logos are trademarks of Free Radical Design Ltd. All rights reserved.
More informationHP Advanced Profiling Solution Quick Start Guide
HP Advanced Profiling Solution Quick Start Guide Welcome to the! You have just successfully installed HP APS on your computer and clicked on the Quick Start Guide button in your HP APS Control Center.
More information2. Now you need to create permissions for all of your reviewers. You need to be in the Administration Tab to do so. Your screen should look like this:
How to set up AppReview 1. Log in to AppReview at https://ar.applyyourself.com a. Use 951 as the school code, your 6+2 as your username, and the password you created. 2. Now you need to create permissions
More informationPrasanth. Lathe Machining
Lathe Machining Overview Conventions What's New? Getting Started Open the Part to Machine Create a Rough Turning Operation Replay the Toolpath Create a Groove Turning Operation Create Profile Finish Turning
More informationINTRODUCTION TO DATA STUDIO
1 INTRODUCTION TO DATA STUDIO PART I: FAMILIARIZATION OBJECTIVE To become familiar with the operation of the Passport/Xplorer digital instruments and the DataStudio software. INTRODUCTION We will use the
More informationSMART 3 IN 1 HOLLYWOOD PHOTOS: SETTING UP YOUR BOOTH FOR WEDDING/EVENT MODE
SMART 3 IN 1 HOLLYWOOD PHOTOS: SETTING UP YOUR BOOTH FOR WEDDING/EVENT MODE Start the Hollywood Photo Booth program. Rightclick anywhere on the screen and choose Setup. Click Next until you get to Screen
More informationCOMPACT GUIDE. Camera-Integrated Motion Analysis
EN 06/13 COMPACT GUIDE Camera-Integrated Motion Analysis Detect the movement of people and objects Filter according to directions of movement Fast, simple configuration Reliable results, even in the event
More informationKEEPING SCORE: HOW TO USE SCORES, LIVES AND HEALTH
KEEPING SCORE: HOW TO USE SCORES, LIVES AND HEALTH A game isn t much of a game unless you can measure how well you re doing. How well players are doing in a game is often measure by their score, how many
More informationThe Intuitive Web-Based Wi-Fi Planning Tool
0 ezwifi Planner The Intuitive Web-Based Wi-Fi Planning Tool User Manual V 1.0 Overview Tools to simulate wireless deployment with EnGenius wireless products. Upload floor plan & set up environment parameters
More informationChapter 1 Virtual World Fundamentals
Chapter 1 Virtual World Fundamentals 1.0 What Is A Virtual World? {Definition} Virtual: to exist in effect, though not in actual fact. You are probably familiar with arcade games such as pinball and target
More informationGAME:IT Bouncing Ball
GAME:IT Bouncing Ball Objectives: Create Sprites Create Sounds Create Objects Create Room Program simple game All games need sprites (which are just pictures) that, in of themselves, do nothing. They are
More informationSettings. ! The Preview Pane !!!!! THE PREVIEW PANE IMAGES & LAYERS PANE SETTINGS PANE SETTINGS WINDOW UNDO/REDO AND RESET
Settings THE PREVIEW PANE IMAGES & LAYERS PANE SETTINGS PANE UNDO/REDO AND RESET SETTINGS WINDOW The Preview Pane When you first load an image, PhotoDonut calculates the preview scale to fit your image
More informationEagleSoft Instructions for using Scanner Interface Version: 11.0 Date Created: 9/1/04 Last Modified: 9/3/04 Filename: 11 Scanner Interface.
EagleSoft Instructions for using Scanner Interface Version: 11.0 Date Created: 9/1/04 Last Modified: 9/3/04 Filename: 11 Scanner Interface.doc Required materials: TWAIN compliant Flatbed Scanner Required
More informationXAP GWARE 119 M A T R I X. Acoustic Echo Canceller
Setting up the Acoustic Echo Canceller Reference of a XAP Description Acoustic echo is generated when far end audio leaves the local room s speaker and gets picked up by the local room s microphones and
More informationInsight VCS: Maya User s Guide
Insight VCS: Maya User s Guide Version 1.2 April 8, 2011 NaturalPoint Corporation 33872 SE Eastgate Circle Corvallis OR 97339 Copyright 2011 NaturalPoint Corporation. All rights reserved. NaturalPoint
More informationMidi Fighter Spectra. Traktor Remix Deck User Guide. Ver 1.01 DJTECHTOOLS.COM
Midi Fighter Spectra Traktor Remix Deck User Guide DJTECHTOOLS.COM Ver 1.01 Setup Guide Get the Midi Fighter Utility The Midi Fighter Spectra requires special firmware to work with Traktor Remix Decks.
More informationM-Powered Basics Guide
M-Powered Basics Guide Version 6.8 for M-Powered Systems on Windows or Macintosh Digidesign 2001 Junipero Serra Boulevard Daly City, CA 94014-3886 USA tel: 650 731 6300 fax: 650 731 6399 Technical Support
More informationAimetis Outdoor Object Tracker. 2.0 User Guide
Aimetis Outdoor Object Tracker 0 User Guide Contents Contents Introduction...3 Installation... 4 Requirements... 4 Install Outdoor Object Tracker...4 Open Outdoor Object Tracker... 4 Add a license... 5...
More informationUsing QuickBird Imagery in ESRI Software Products
Using QuickBird Imagery in ESRI Software Products TABLE OF CONTENTS 1. Introduction...2 Purpose Scope Image Stretching Color Guns 2. Imagery Usage Instructions...4 ArcView 3.x...4 ArcGIS...7 i Using QuickBird
More informationControl Systems in Unity
Unity has an interesting way of implementing controls that may work differently to how you expect but helps foster Unity s cross platform nature. It hides the implementation of these through buttons and
More informationHow to Guide: Controlling Blinds in C-Bus
How to Guide: Controlling Blinds in C-Bus This document is a guide to controlling electrical blinds with C-Bus. Part 1 shows how the blind could be controlled by C-Bus directly and part 2 shows how C-Bus
More informationVectorworks Architect
SAMPLE by Jonathan Pickup third edition written with version 2011 Vectorworks Architect Tutorial Manual Table of Contents Introduction... iii How to Use this Manual... iii New Ways of Drawing... iv Vectorworks
More informationThe assembly is comprised of two components and these must be prepared first
Tutorial Edge Assembly Detail Introduction Most users will be familiar with the process of extracting quantities for flashing materials using the regular flashing command, ie standard profiles such as
More informationScanning Setup Guide for the ISIS Driver
Scanning Setup Guide for the ISIS Driver Using the Layout More tab... 2 Using the ISIS Driver to setup presets... 3 Creating a new preset... 4 Presets tab... 5 Main tab... 6 Layout tab... 9 Image Processing
More informationSpace Invadersesque 2D shooter
Space Invadersesque 2D shooter So, we re going to create another classic game here, one of space invaders, this assumes some basic 2D knowledge and is one in a beginning 2D game series of shorts. All in
More informationCora Beatriz Pérez Ariza José Manuel Llamas Sánchez [IMAGE RESTORATION SOFTWARE.] Blind Image Deconvolution User Manual Version 1.
2007 Cora Beatriz Pérez Ariza José Manuel Llamas Sánchez [IMAGE RESTORATION SOFTWARE.] Blind Image Deconvolution User Manual Version 1.0 * Table of Contents Page 1. Introduction. 4 1.1. Purpose of this.
More information15 TUBE CLEANER: A SIMPLE SHOOTING GAME
15 TUBE CLEANER: A SIMPLE SHOOTING GAME Tube Cleaner was designed by Freid Lachnowicz. It is a simple shooter game that takes place in a tube. There are three kinds of enemies, and your goal is to collect
More informationArbStudio Triggers. Using Both Input & Output Trigger With ArbStudio APPLICATION BRIEF LAB912
ArbStudio Triggers Using Both Input & Output Trigger With ArbStudio APPLICATION BRIEF LAB912 January 26, 2012 Summary ArbStudio has provision for outputting triggers synchronous with the output waveforms
More informationObjectives: Create Sprites Create Sounds Create Objects Create Room Program simple game
GAME:IT Bouncing Ball Objectives: Create Sprites Create Sounds Create Objects Create Room Program simple game All games need sprites (which are just pictures) that, in of themselves, do nothing. They are
More informationRKSLAM Android Demo 1.0
RKSLAM Android Demo 1.0 USER MANUAL VISION GROUP, STATE KEY LAB OF CAD&CG, ZHEJIANG UNIVERSITY HTTP://WWW.ZJUCVG.NET TABLE OF CONTENTS 1 Introduction... 1-3 1.1 Product Specification...1-3 1.2 Feature
More informationMOBILE INVENTORY UPDATES
MOBILE INVENTORY UPDATES Mobile Inventory Updates Page 1 of 11 TABLE OF CONTENTS Introduction...3 To Do List...3 Shelter Walk...4 Shelter Walk Setup...5 Name & Order of Locations...5 Person & Schedule
More informationGD.FINDI FUNCTIONS OVERVIEW
GD.FINDI FUNCTIONS OVERVIEW ASSOC. PROF. DR. CHAWALIT JEENANUNTA HEAD OF CENTER FOR DEMONSTRATION AND TECHNOLOGY TRANSFER OF INDUSTRY 4.0 HEAD OF LOGISTICS AND SUPPLY CHAIN SYSTEM ENGINEERING RESEARCH
More informationJing PDF Tutorial Template
Jing PDF Tutorial Template Developer Name: Microsoft App Utilized: Video URL from Camtasia: https://www.youtube.com/watch?v=kcp7hg8vbvs&feature=youtu.be Table of Contents New Slide pg. 2-3 Action Button
More informationXIM Gen4 Sensor Programming Examples. Rev /05/2016
XIM Gen Sensor Programming Examples Rev 0.6 2/0/206 Overview The latest XIM Gen firmware (V0.28), Xsensor firmware (V0.0) and XIM-BLE Control Panel (V..) update includes significant changes to sensor support.
More informationAdding in 3D Models and Animations
Adding in 3D Models and Animations We ve got a fairly complete small game so far but it needs some models to make it look nice, this next set of tutorials will help improve this. They are all about importing
More informationEYFS Profile. HelpCard. This HelpCard is about using the EYFS Profile. Class EYFS Profile Record
HelpCard EYFS Profile This HelpCard is about using the EYFS Profile The EYFS Profile can be used to record a child s attainment through the EYFS Profile. It can continue to be used as a record from Nursery
More informationSanctioning A Tournament
Sanctioning A Tournament How To Sanction A Pokémon Tournament 1 1. Log into your Pokémon Trainer Club account and select OP Tools Dashboard from the lefthand toolbar. Note: You must have the Organizer
More informationSolutions Lab. AXIS Barcode Reader
AXIS Barcode Reader Please note that this software has only been subject to limited testing and that you cannot expect full support regarding the software. The software is to be considered as experimental
More informationThank you for purchasing one of our Autotracking devices, this manual will show you how
Last Updated 12/5/2010 Ver 1.3 Thank you for purchasing one of our Autotracking devices, this manual will show you how to use and obtain the most benefit from your device. This manual covers all the installation
More informationChapter 9 Organization Charts, Flow Diagrams, and More
Draw Guide Chapter 9 Organization Charts, Flow Diagrams, and More This PDF is designed to be read onscreen, two pages at a time. If you want to print a copy, your PDF viewer should have an option for printing
More informationSalesforce Communities Recognition Badges Implementation Guide
Salesforce Communities Recognition Badges Implementation Guide Salesforce, Winter 19 @salesforcedocs Last updated: December 4, 2018 Copyright 2000 2018 salesforce.com, inc. All rights reserved. Salesforce
More informationImage Editor. Opening Image Editor. Click here to expand Table of Contents...
Image Editor Click here to expand Table of Contents... Opening Image Editor Image Editor Sorting and Filtering Using the Image Editor Source Tab Image Type Color Space Alpha Channel Interlace Mipmapping
More informationEntering Entrant and Image Title Information into the EXIF Data
In Bridge Place all your images into one folder, with no other images present. Press and to select all images Enter the Entrants name into the "Author" field, press . That will enter exactly
More informationBasic Recording. Start --> Programs --> Panopto --> Panopto Recorder. Logging In
Basic Recording Logging In Presenters are able to log into the Recorder with their credentials and record video, audio, PowerPoint presentations and also add Screen Capture functionality. NOTE: If using
More informationDrive Mode. Details for each of these Drive Mode settings are discussed below.
Chapter 4: Shooting Menu 67 When you highlight this option and press the Center button, a menu appears at the left of the screen as shown in Figure 4-20, with 9 choices represented by icons: Single Shooting,
More informationPeople In Spaces A Workshop on using Photoshop to introduce Entourage Elements into existing work.
People In Spaces A Workshop on using Photoshop to introduce Entourage Elements into existing work. Peter M. Gruhn peter.gruhn@the-bac.edu Sponsored by Atelier and the Learning Resource Center 1 Layers
More informationOverview. The Game Idea
Page 1 of 19 Overview Even though GameMaker:Studio is easy to use, getting the hang of it can be a bit difficult at first, especially if you have had no prior experience of programming. This tutorial is
More informationAlice: A Visual Introduction to Programming. Chapter 1 Part 2
Alice: A Visual Introduction to Programming Chapter 1 Part 2 Objects Alice uses objects o Tent o Soldier o Princess Objects perform actions Turn Move Fly Wave 1-2 The Alice System 1-3 Open SnowLove in
More informationAF Area Mode. Face Priority
Chapter 4: The Shooting Menu 71 AF Area Mode This next option on the second screen of the Shooting menu gives you several options for controlling how the autofocus frame is set up when the camera is in
More informationOTHER RECORDING FUNCTIONS
OTHER RECORDING FUNCTIONS This chapter describes the other powerful features and functions that are available for recording. Exposure Compensation (EV Shift) Exposure compensation lets you change the exposure
More informationE90 Project Proposal. 6 December 2006 Paul Azunre Thomas Murray David Wright
E90 Project Proposal 6 December 2006 Paul Azunre Thomas Murray David Wright Table of Contents Abstract 3 Introduction..4 Technical Discussion...4 Tracking Input..4 Haptic Feedack.6 Project Implementation....7
More informationCCG Referral App - Northern Ireland
CCG Referral App - Northern Ireland For practices in Northern Ireland who use the Referral Screen supplied by the CCG, the way you access the screen has been updated. A Vision App has been created to enable
More informationISONIC PA AUT Spiral Scan Inspection of Tubular Parts Operating Manual and Inspection Procedure Rev 1.00 Sonotron NDT
ISONIC PA AUT Spiral Scan Inspection of Tubular Parts Operating Manual and Inspection Procedure Rev 1.00 Sonotron NDT General ISONIC PA AUT Spiral Scan Inspection Application was designed on the platform
More informationHow to Rotate, Level, Crop, and Size Images
How to Rotate, Level, Crop, and Size Images The most basic editing you can apply to an image in Photoshop Elements involves making changes to the entire file. Some common changes include rotating, leveling,
More informationPhoto Story Instructions!
Highland Park High School Photo Story Instructions Page 1 of 11 Rev 2, 6/2008 Photo Story Instructions! Before you begin! Write your script first! This is the most important part of your project. Each
More informationLab 5: Advanced camera handling and interaction
Lab 5: Advanced camera handling and interaction Learning goals: 1. Understanding motion tracking and interaction using Augmented Reality Toolkit 2. Develop methods for 3D interaction. 3. Understanding
More informationGlobiScope Analysis Software for the Globisens QX7 Digital Microscope. Quick Start Guide
GlobiScope Analysis Software for the Globisens QX7 Digital Microscope Quick Start Guide Contents GlobiScope Overview... 1 Overview of home screen... 2 General Settings... 2 Measurements... 3 Movie capture...
More informationSteamVR Unity Plugin Quickstart Guide
The SteamVR Unity plugin comes in three different versions depending on which version of Unity is used to download it. 1) v4 - For use with Unity version 4.x (tested going back to 4.6.8f1) 2) v5 - For
More informationExcel TGI Football Game DELUXE Instructions & Help File
Excel TGI Football Game DELUXE Instructions & Help File The Excel TGI Football Game DELUXE is a training game that features your own questions in a realistic football game. Class participants learn while
More informationGAME:IT Junior Bouncing Ball
GAME:IT Junior Bouncing Ball Objectives: Create Sprites Create Sounds Create Objects Create Room Program simple game All games need sprites (which are just pictures) that, in of themselves, do nothing.
More informationSetting Up a Matrix/Template in the Vienna Instruments Player
Setting Up a Matrix/Template in the Vienna Instruments Player By Peter Lawrence Alexander / February 6, 2013 A first glance at the Vienna Instruments player can appear to be both daunting and overwhelming.
More informationLandscaping Tutorial. Chapter 5:
Chapter 5: Landscaping Tutorial This tutorial was written to help you learn how to use Home Designer Landscape and Deck s Terrain tools. In this tutorial, you will learn how to add elevation information
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationCreo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
More informationOnline Banking Guide for Commercial Customers
On the main page highlight transfers Select Make a Wire Transfer Getting Started Wire Type - Domestic wire type is the default Wire Name - Give your wire a unique name Debit Account - Choose the account
More informationConnecting radios all over the world. Configuring and using SoftRadio on the dispatcher PC
Connecting radios all over the world Configuring and using SoftRadio on the dispatcher PC Release date January 15, 2019 This guide will help with the configuration and daily use of your dispatcher PC in
More informationMID-LEVEL EXERCISES. Project Management Life Cycle. Project Management
MID-LEVEL EXERCISES Project Management Life Cycle You have been asked to train the employees of a family-owned company about the life cycle of a m* " project. You begin a slide show by creating an infographic,
More informationteachweld Trainer Section 2: Usability Brought to you by Realityworks, Inc., the experiential learning technology company
teachweld Trainer Section 2: Usability Brought to you by Realityworks, Inc., the experiential learning technology company Page 1: Title Page Page 2: : Login Instruction Page 3: teachweld Modes Title Page
More informationTo solve a problem (perform a task) in a virtual world, we must accomplish the following:
Chapter 3 Animation at last! If you ve made it to this point, and we certainly hope that you have, you might be wondering about all the animation that you were supposed to be doing as part of your work
More informationVIEWSCAN 4 BRING YOUR FILM TO LIFE
VIEWSCAN 4 BRING YOUR FILM TO LIFE VIEWSCAN 4 DELIVERS THE CLEAREST VIEW OF THE PAST Prior to the digital age, microfilm was the standard for document preservation. Now, thanks to ST Imaging s ViewScan
More informationCreate a Business Card for World Travel Agency
Create a Business Card for World Travel Agency In this lesson, students will design and create a business card for their world travel agency, using AppleWorks drawing tools. They will include graphic images
More informationSection 7: Using the Epilog Print Driver
Color Mapping The Color Mapping feature is an advanced feature that must be checked to activate. Color Mapping performs two main functions: 1. It allows for multiple Speed and Power settings to be used
More informationPlanning A Photography Trip. John Nixon, Master Photographer Fort Worth Camera Club Oct. 9, 2018
Planning A Photography Trip John Nixon, Master Photographer Fort Worth Camera Club Oct. 9, 2018 Topics Determine location Research location Type of transportation Equipment Work the scene Back up images
More informationPhase Shifters and DC ties in the IDC
Phase Shifters and DC ties in the IDC June 2009 Version 0 1.0 Summary...2 2.0 Setup and Use of Phase Shifters in IDC...2 2.1. Modeling Requirements for Phase Shifters...2 2.2. Submittal of etags over Phase
More informationGETTING STARTED WITH GOOGLE S SCIENCE JOURNAL
GETTING STARTED WITH GOOGLE S SCIENCE JOURNAL ABOUT SCIENCE JOURNAL Google s Science Journal (GSJ) is a digital science notebook that allows users to conduct experiments and record their results all in
More information