Celebrate. Assembly Line Scrapbooking. January 2016 Club Scrap Deluxe. Materials: Celebrate Deluxe Kit with Embellishment Option

Transcription

1 Assembly Line Scrapbooking January 2016 Club Scrap Deluxe Celebrate Materials: Celebrate Deluxe Kit with Embellishment Option Tools and Supplies: 12 Paper Trimmer Adhesive Foam Adhesive Tape 3x14 CS Grid Ruler Scissors Stapler and Staples 1 Circle Punch Plain White Paper (for Bottle Caps) Measurement Conversions:.125 = ⅛.25 = ¼.375 = ⅜.5 = ½.625 = ⅝.75 = ¾.875 = ⅞ LB = Left Base Page RB = Right Base Page Preparation: Trim the Gray Pattern Printed Cutaparts into sections as indicated by the artwork. Punch out the circles from the White Printed Die Cut and preserve the parent sheet. Trim at 11-1/2, 7-7/8, and 4-1/4. (Two strips will be used on Layouts 7&8.) Prepare six 1 circles to fill in the flattened bottle caps. Choose from graphs, stamped images, stenciled images, etc. Adhere the punched circle to the bottle cap and cover with the clear epoxy circle. If you do not have an item to complete the layout as shown, simply omit or substitute the item. All rights reserved

2 January 2016 Celebrate Page 2 of 8 Layout 1 & 2 3x3¾ 5½x3¾ 5½x3¾ 3x3¾ 3x3¾ (2) 12x12 Black Prints (LB & RB) 12x12 Blue Print 12x12 Blue Plain 8.5x11 Gray Plain (2) 4.25x6.25 Silver Sparkle Photo Mats White Printed Die Cut Gray Pattern Cutaparts Star and Crown Puffy Patches Printed Grosgrain Ribbon Flattened Bottle Cap and Clear Epoxy Circle 1. Place the 12x12 Blue Print into the trimmer with the bold circle in the upper right corner; trim at 11.25, 9 and 6. Cut the 6x12 horizontally at 8 and Cut the 12x12 Blue Plain at 8 and 4. Trim one 4x12 horizontally at 9.75, 6.5 and Trim the 8.5x11 Gray Plain vertically at Cut one 4.25x11 horizontally at 5.5. Trim the other 4.25x11 horizontally at 10.5, 7 and 3.5.

3 January 2016 Celebrate Page 3 of 8 Layout 3 & 4 4x5½ 4x5½ 2¾x3¾ (2) 12x12 White Plains (LB & RB) 12x12 Silver Sparkle 12x12 White Print 8.5x11 Orange Plain 8.5x11 White Print 4.25x6.25 Silver Sparkle Photo Mat White Printed Die Cuts 3x4 Gray Pattern Cutapart with Circle Image, Plain Side Crown Puffy Patch Black Satin Ribbon 1. Cut the 12x12 Silver Sparkle at 11.5, 11, 10.5, 9, 7.5 and 4. Trim the 4x12 horizontally at Trim the 12x12 White Print at 11, 10, 9, 6 and Cut the 8.5x11 Orange Plain vertically at Trim the 5.75x11 horizontally at 8.5 and Cut the 2.5x5.75 horizontally at 5.5 and Trim the 2.75x11 horizontally at 8.25, 5.5 and Place the 8.5x11 White Print vertically into the trimmer with the color at right; trim at 6.5. Cut the 6.5x11 horizontally at 9 and 4.5. Trim the 2x6.5 horizontally at 6 and 3.

4 January 2016 Celebrate Page 4 of 8 Layout 5 & 6 3¾x5¾ 1¾x2¾ 1¾x2¾ (2) 12x12 Orange Prints (LB & RB) 8.5x11 Gray Pattern Print 8.5x11 Gray Plain Blue Print (From 1&2) 3x12 Blue Print (From 1&2) 2.75x12 Blue Print (From 1&2).75x12 Blue Print (From 1&2) (2) 2x3 White Prints (From 3&4) 4.25x6.25 White Photo Mat Gray Pattern Cutaparts White Printed Die Cuts Star Puffy Patch Banner Stickers Orange Checked Ribbon 1. Place the 8.5x11 Gray Pattern Print vertically into the trimmer with the word on the right; trim at Trim the 8.5x11 Gray Plain horizontally at Trim the 6.25x8.5 horizontally at Trim one White Printed Die Cut circle in half.

5 January 2016 Celebrate Page 5 of 8 Layout 7 & 8 1¾x2½ (2) 12x12 Gray Plains (LB & RB) 8.5x11 White Print (2) 4x12 Blue Plains (From 1&2) (3) 4.25x6.25 Orange Photo Mats White Printed Die Cut 1¾x2½ (2) 3.625x12 White Die Cut Parent Sheet Strips, Plain Side Flattened Bottle Cap and Clear Epoxy Sticker Tri-colored Ribbon (2) White Paper Fasteners 1. Place the 8.5x11 White Print vertically into the trimmer with the colored edge on the left; trim at 6.5. Cut the 2x11 horizontally at 8.25, 5.5 and Keep the White Die Cut strips free of adhesive in the center to allow placement of s behind the openings.

6 January 2016 Celebrate Page 6 of 8 Layout 9 & 10 2½x2¼ 2½x2¼ 1¾x2½ 5¾x3¾ 1¾x2½ 5¾x3¾ 12x12 Black Plain (LB) 12x12 White Print (RB).5x12 Silver Sparkle (From 3&4) (2) Silver Sparkle (From 3&4) 3.5x12 Silver Sparkle (From 3&4) 1x12 White Print (From 3&4) (2) 2.5x2.75 Orange Plains (From 3&4) 2x11 White Print (From 3&4) (2) 2x2.75 White Prints (From 7&8) (2) 4.25x6.25 White Photo Mats Gray Pattern Cutparts Orange Paper Fastener (2) Star Puffy Patches Black Satin Ribbon 1. No trimming required for this layout.

7 January 2016 Celebrate Page 7 of 8 Layout 11 & 12 5¼x4 5¼x4 12x12 Blue Plain (LB) 12x12 Blue Print (RB) 8.5x11 Gray Pattern Print (Not Cut) 8.5x11 Orange Plain (3) 4.25x6.25 Black Photo Mats Gray Pattern Cutaparts White Printed Die Cut (2) Flattened Bottle Caps and Clear Epoxy Circles 1. Trim the 8.5x11 Orange Plain vertically at Cut one 4.25x11 horizontally at 5.5. Trim the other 4.25x11 horizontally at 10.5 and Trim one White Printed Die Cut circle in half.

8 January 2016 Celebrate Page 8 of 8 Layout 13 & 14 2½x2½ 2½x2½ 2½x2½ 2½x2½ 4x5¼ 4x5¼ 12x12 Black Plain (LB) 12x12 Silver Sparkle (RB) (2) 4.25x5.5 Gray Plains (From 1&2) (2).5x12 Silver Sparkle (From 3&4) (2) 1x12 White Prints (From 3&4) 3x12 White Print (From 3&4) (4) 2.75x2.75 Orange Plains (From 3&4) 4.25x6.25 Gray Plain (From 5&6) 4.25x6.25 Orange Plain (From 11&12) White Printed Die Cuts Gray Pattern Cutaparts Black Paper Fastener Flattened Bottle Cap and Clear Epoxy Circle 1. Trim one White Printed Die Cut circle in half.