M A C H I N E R Y L I S T

Transcription

1 M A C H I N E R Y L I S T Napkin Folders Ref. #49 1 HOBEMA 14M-2 napkin folder, year 1987, double-lane, for napkin size 40 cm, with driven unwind stand, calendering unit, web aligner no. 1, 2-colour printing tower (with 2 printing units), hot-air dryer, web aligner no. 2, embossing station with one set of steel/steel embossing rollers (border embossing), 2 sets of folding cylinders for 40 cm, automatic transfer, production speed approx. 250 m/min, with SENNING 522 SE/P wrapping machine, speed approx. 50 packs / min., very good condition (ready for demonstration), immediately available Ref. #177 1 SERV-O-TEC napkin folder model servo-flex 802/660 S/4, year 1994, for 1/4-fold napkins of cm, with driven unwind stand, calendering unit, 4-colour printing station with one printing unit, hot air dryers, FIFE web aligner, 3-position embossing station with 3 sets of steel/paper embossing rollers (33 cm border embossing, 33 x 40 cm guest towel border embossing, as well as allover embossing), folding station with length slitters for double-lane production, 1/4-folding cylinders of size range cm, manual transfer, fair condition, still in production (but hardly used), immediately available Ref. #276 1 SERV-O-TEC napkin folder model 802/660 S/4, double-lane, year 1998 for 1/4-folded napkins, with driven unwind stand, calendering unit, BST web aligner, 4-colour printing tower with 4 printing stations, infra-red drying system with two IR-cassettes (36 kw heating capacity), web stabilizing drum (with inside electrical heating), 2nd BST web aligner, 2-position embossing station with 2 sets of steel/paper embossing rollers for 33 x 33 cm border embossing and allover embossing, folding station with length slitter and two length folding plates, 1/4-folding cylinders for a size range of cm, auto transfer, speed approx. 250 m/min., with 1 CASSOLI PAC340 wrapping machine (year 1999), speed approx. 40 packs/min., very good condition, still in production, immediately available Ref. #289 1 HOBEMA napkin folder model 14C-2, double-lane, for napkins of size 33 x 33, 36 x 36, and 40 x 40 cm, with driven unwind stand, 2-position embossing station with 1 sets of steel/paper embossing rollers (allover embossing), length folding plates for ¼- and 1/8-fold (headfold), 3 sets of folding cylinders for 33, 36, and 40 cm, production speed approx. 220 m/min resp napkins / min., still in production, immediately available Seite 1 von 16 TISSUE TEC Sales & Service GmbH In der Birk Dormagen Germany Tel Fax info@tissue-tec.de Managing Director: Wolfgang Tillmann Handelsregister: Amtsgericht Neuss, HRB VAT-No.: DE Bank: Sparkasse Neuss IBAN: DE BIC: WELADEDNXXX

2 Ref. #290 1 SDF napkin folder model OmegaPlus 660/6, double-lane, year 2004, for 1/4-folded napkins, with driven unwind stand, calendering unit, BST web aligner, 8-colour printing tower with 6 printing stations, BST video web inspection, infra-red drying system with four IR-cassettes (88 kw heating capacity), web stabilizing drum (with inside electrical heating), 2nd BST web aligner, 2-position embossing station with 1 set of steel/steel (UniMaTec top - to - half-flat) embossing rollers for 33 x 33 cm border embossing, folding station with length slitter and two length folding plates, 1/4-folding cylinders for a size range of cm, auto transfer, speed approx. 250 m/min., with 1 ILSEMANN wrapping machine model NW-10S, for napkins of size 25 and 33 cm (various pack heights), speed approx. 80 packs/min., upon request with ILSEMANN AUTOMATION pick-and-place robot, good condition, immediately available Ref. #291 1 SDF napkin folder model OmegaPlus 860/8, double-lane, year 2006, for 1/4-folded napkins, with driven unwind stand, calendering unit, BST web aligner, 8-colour printing tower with 8 printing stations, BST video web inspection, infra-red drying system with four Hybrid-IR-cassettes (100 kw heating capacity), 2 web stabilizing drums (with inside electrical heating), 2nd BST web aligner, 2- position embossing station with 2 sets of steel/steel (UniMaTec top - to - half-flat) embossing rollers for 33 x 33 and 40 x 40 cm border embossing, folding station with length slitter and two length folding plates, automatic print-to-cut registration, 1/4-folding cylinders for a size range of cm, auto transfer, speed approx. 250 m/min., with 1 ILSEMANN wrapping machine model NW-6S (servoexecution), for napkins of size 33 and 40 cm (various pack heights), speed approx. 70 packs/min., upon request with ILSEMANN AUTOMATION pick-and-place robot, good condition, immediately available Ref. #294 1 OMET napkin folder model TV501 6/A, year 1988, for napkins of sizes 25 and 33 cm, with driven unwind stand, calendering unit, web aligner no. 1, 6-colour printing tower (with 6 printing units), hotair dryer, BST video web inspection (model PowerScope 4000, new!), web aligner no. 2, embossing station with three sets of steel/paper embossing rollers (border embossing for 25 and 33 cm, as well as allover embossing), 2 sets of folding cylinders for 25 and 33 cm, special aggregate to produce dispenser napkins 17 x 17 cm, production speed approx. 300 m/min, very good condition (continuously maintained and upgraded), still in production, immediately available Ref. #295 1 SENNING napkin wrapper model 522 SE/M, year 1991, for product length mm, width mm, and height mm, with size parts for 33 x 33 cm napkins (pack height 7,5 cm), with infeed chain, automatic film feeding, print register control, standard perforation, speed up to 40 packs / min., very good condition, immediately available Seite 2 von 16

3 Ref. #296 1 HOBEMA napkin folder model 14C, for napkins of size 33 cm, with driven unwind stand, calendering unit, web aligner no. 1, 6-colour printing tower (with 6 printing units), hot-air dryer, BST video web inspection (model Super HandyScan), web aligner no. 2 (BST Ekr500, new), embossing station with two sets of steel/paper embossing rollers (for border embossing 33 cm), length folding plates for standard and headfold, 2 sets of folding cylinders for 33 cm, production speed approx. 250 m/min, very good condition (continuously maintained and upgraded), still in production, immediately available Ref. #297 1 HOBEMA napkin folder model 14C, for napkins of size 40 cm, with driven unwind stand, calendering unit, web aligner, 2-colour printing tower (with 2 printing units), 2-position embossing station with 2 sets of steel/paper embossing rollers (border embossing 40 cm), 1 set of folding cylinders for 40 cm, production speed approx. 200 m/min, in production until August 2017, good condition, immediately available Ref. #300 1 GIEBELER napkin folder model RSN, for 1/4-fold napkins in a size range of cm, with driven unwind stand, new BST web aligner, calendering unit, 5-colour printing tower with 4 printing units, web stabilizing drum with inside electrical heating, hot-air dryers, 2-position embossing station with 1 set of steel/paper embossing rollers (border embossing for size 33 cm), folding cylinders for a size range of cm, stack counting and marking by tape inserter, manual transfer, speed approx napkins / hour, very good condition, still in production, immediately available Ref. #312 1 GIEBELER napkin folder model S284, year 1989, for 1/4- and 1/8-fold napkins in a size range of cm, with driven unwind stand, BST web aligner, calendering unit, PERINI point-to-point embossing station (retrofitted in 1993), 4-colour printing tower with 4 printing units, infra-red dryer, web stabilizing drum with inside electrical heating, 3-position embossing station with 1 set of steel/paper embossing rollers (border embossing for size 33 cm), folding machine with length slitter and folding plates for ¼-fold and GT-fold, folding cylinders for a size range of cm (1/4- and 1/8-fold), stack counting and marking by tape inserters, manual transfer, speed approx napkins / hour, very good condition, still in production, available upon request Seite 3 von 16

4 Ref. #322 1 PERINI napkin folder model 8.5 (F8051), year 2008, for napkins of size 25, 29, 30 and 39 cm (one size at your choice), with driven unwind stand incl. reel lifter, FIFE-web aligner, 2-colour printing tower with 2 printing units (incl. ink pumps), embossing station with steel/steel embossing rollers for 25 x 25, 29 x 29, 30 x 40, 39 x 39 cm (one set matching the product size of your choice), as well as for allover embossing, folding cylinders for sizes 25, 29, 30, and 39 cm (you may choose one set), automatic transfer, production speed 250 m/min., as well as with 1 CASMATIC wrapper model CMF100, very good condition, still in production, immediately available Ref. #324 1 PERINI napkin folder model 8.5 (F8051), year 2008, for napkins of size 25, 29, 30 and 39 cm (one size at your choice), with driven unwind stand incl. reel lifter, FIFE-web aligner, embossing station with steel/steel embossing rollers for 25 x 25, 29 x 29, 30 x 40, 39 x 39 cm (one set matching the product size of your choice), as well as for allover embossing, folding cylinders for sizes 25, 29, 30, and 39 cm (you may choose one set), automatic transfer, production speed 250 m/min., upon request with 1 CPS wrapper model 801, very good condition, still in production, immediately available Ref. #330 1 OMET napkin folder model TV503, year 2012, for sizes 24 and 33 cm, with unwind stand (max. reel diam mm), web aligner, embossing station with one set of steel / paper border embossing rollers, one set of allover embossing rollers, additional embossing station with steel/paper embossing rollers for 24 and 33 cm border embossing), folding station with two sets of folding cylinders (for napkin sizes 24 and 33 cm), automatic transfer model TA501, speed approx. 600 m/min. / 55 packs / min., with CPS napkin wrapper model 801 for pack heights 25, 50, and 100 mm, speed 60 packs / min., excellent condition, available upon request Ref. #335 1 SERV-O-TEC napkin folder model servo-flex 902/840 A/2, fully refurbished in 2013, for 1/4-fold napkins of cm, with driven unwind stand, calendering unit, BST web aligner, 2-position embossing station with 2 sets of steel/paper embossing rollers (33 and 40 cm border embossing), 2-colour printing station with two printing units, folding station with length slitters for double-lane production, 1/4-folding cylinders of size range cm, automatic starwheel transfer (year 2013), speed approx napkins / hour, as well as with SERV-O-TEC wrapping machine model STW- 60 (year 2013), speed 50 packs / min, very good condition, still in production (but hardly used), immediately available Seite 4 von 16

5 Ref. #363 1 OMET napkin folder model TV503, year 2011, laid out for napkins of size 30, 33 and 40 cm (you may choose the size parts for your needs), with turret-type unwind stand (incl. reel lifter), web aligner, embossing station with two sets of steel/steel border embossing rollers (to pick from the possible sizes mentioned above), folding station with two sets of folding cylinders for napkin sizes as mentioned above, automatic transfer model TA-HS, speed approx. 550 m/min. / 50 packs / min., with MULTIPACK napkin wrapper model NK-70 for pack heights 150 mm, speed 60 packs / min., good condition, immediately available Ref. #364 1 OMET napkin folder model TV503, year 2011, laid out for napkins of size 30, 33 and 40 cm (you may choose the size parts for your needs), with turret-type unwind stand (incl. reel lifter), web aligner, embossing station with two sets of steel/steel border embossing rollers (to pick from the possible sizes mentioned above), folding station with two sets of folding cylinders for napkin sizes as mentioned above, automatic transfer model TA-HS, speed approx. 550 m/min. / 50 packs / min., with MULTIPACK napkin wrapper model NK-70 for pack heights 150 mm, speed 60 packs / min., good condition, immediately available Handkerchief Machines Ref. #313 1 PCMC / SENNING / G&P handkerchief line for regular hankies, year 1992, consisting of 1 PCMC folding machine model 810M, 4-lanes = 840 mm parent reel width, product size 21 x 21 cm, 1 twolane SENNING wrapping machine model (with SCHLEUTER 4-head labelling machine), as well as with G&P bundler model EP2060 EVO (various packing configurations), folding machine with driven unwind stand, calendering unit, embossing station with one set of steel/steel embossing rollers (border embossing), 3 length slitters, 4 length folding plates, folding cylinders, automatic transfer to the wrapping equipment, speed of line approx. 350 packs / min., good condition, still installed, immediately available Ref. # lane TAU handkerchief line model 2040 for regular and compact hankies, year 2009, consisting of 1 folding machine model MF400, 1 wrapping machine model CF400, labeler model ET2, 1 bundler bundler model CS80, as well as with DI.CO SOLVING case packer model BOX600; the folding machine is equipped with driven unwind stand model SVP500, BST web aligner, calendering unit, embossing station with one set of flat-to-top embossing rollers, length slitter, 2 length folding plates, folding cylinders, automatic transfer to the wrapping equipment, speed of line approx. 320 packs / min., very good condition, still installed, available 4 th quarter of 2018 Seite 5 von 16

6 Ref. # lane TAU handkerchief line model 2040 for regular and compact hankies, year 2010, consisting of 1 folding machine model MF400, 1 wrapping machine model CF400, labeler model ET2, 1 bundler bundler model CS80, as well as with DI.CO SOLVING case packer model BOX600; the folding machine is equipped with driven unwind stand model SVP500, BST web aligner, calendering unit, embossing station with one set of flat-to-top embossing rollers, lotion application unit, length slitter, 2 length folding plates, folding cylinders, automatic transfer to the wrapping equipment, perfume applicator, speed of line approx. 320 packs / min., very good condition, still installed, available 4 th quarter of 2018 Ref. # lane WINKLER + DÜNNEBIER / SENNING / VT handkerchief line for regular hankies, year 1996, consisting of 1 W+D folding machine model , 1 SENNING 525 D-100 wrapping machine (with SGT-2 labeler), as well as with SENNING 507 TG bundler (various packing configurations), folding machine with driven unwind stand, BST ekr1500 web aligner, calendering unit, embossing station with one set of steel/steel embossing rollers, 2 length slitters, 4 length folding plates, folding cylinders, automatic transfer to the wrapping equipment, as well as with VT case packer model VT- A2/A speed of line approx. 600 packs / min., very good condition, still installed, available upon request Toilet and Kitchen Roll Rewinders Ref. #1 1 WRAPMATIC PW 20 wrapping machine, year 1991, with infeed conveyor, formation device, film unwind, wrapping station, outfeed belt and sealing unit, equipped with parts for 2 and 4 toilet rolls / pack, production speed approx. 50 packs / min., fair condition, immediately available Ref. #22 1 PERINI Compact 716B toilet roll rewinder in mm working width, year 2000, with core magazine, unwind stand, embossing station with rubber/steel embossing rollers, rewinder head, tail sealer, integrated log saw (2-lanes, with Trimex), speed approx. 180 rolls / min, perforation lengths mm, roll diam mm, excellent condition, as well as with core winder, 1 CASSOLI RA10 CIV wrapper for 4 and 6 toilet rolls, 1 CASSOLI PAC 900R for 6, 8 and 10 rolls (single-layer) resp. 12, 16 and 20 rolls (two-layers), 1 WRAPMATIC Multipack for 2 rolls, and 1 CASSOLI IN3/A bundler, furthermore with 1 PERINI core winder, still in production, very good condition, available upon request Seite 6 von 16

7 Ref. #77 1 PERINI toilet and kitchen roll rewinder model Sincro 4.0, working width mm, year 2002, with 2 PERINI unwind stands model 350B, 1 PERINI printing station model 900, PERINI embosser / laminator model 431G, PERINI Sincro 4.0 rewinder for logs of mm, PERINI tail sealer model 65.50, PERINI accumulator for 180 logs, 4-lane log saw PERINI model 176E, speed 400 m/min. resp. 22 logs / min., as well as with core winder, furthermore with 1 TMC wrapper model Qualiwrap 1800 and 1 TMC bundler model Qualiflex FBS200, very good condition, still in production, available upon request Ref. #78 1 PERINI toilet and kitchen roll line model 813, working width mm, with 1 PERINI unwind stand model (year 2005), 1 embossing station ZAMEX (year 2013) incl. lamination, rewinder PERINI 813 (year 2005), log accumulator KAVAFAKIS (year 2009), 1 log saw PERINI 131, 1 core winder ZAMEX (year 2013), speed approx. 250 m/min. resp. 8 logs / min, good condition, immediately available Ref. #79 1 PERINI toilet and kitchen roll line model 810, working width mm, with 2 ZAMEX unwind stands (year 2013), 1 double embossing station ZAMEX (year 2013) incl. lamination for random and DESL embossing, rewinder PERINI 810 with integrated tail sealer, log accumulator PERINI model 510 (capacity 180 logs), speed approx. 250 m/min. resp. 8 logs / min., good condition, immediately available Ref. #105 1 PERINI kitchen roll rewinder model Bravo, year , working width mm, with 2 PERINI unwind stands (year 2002), 1 PCMC DESL embosser, 1 PERINI point-to-point embosser (year 1987), 1 PCMC 4-color printing station (year 1997), 1 PERINI Bravo rewinder (year 1987), 1 PERINI tail sealer 560C (year 2000), 1 ROLCO log loader, 1 ROLCO log accumulator, 2 PCMC 2-lane log saws C180, 1 PCMC core maker 801 CW with 2 unwinds (year 2006), upon request with 1 CASMATIC diverter 4/8 (year 2000), 1 CASMATIC CMW 424 wrapper (year 2001), 1 OCME palletizer SP100, 1 PIERI stretch wrapper AVR319, various additional equipment (metal detector, labeller etc.), immediately available Seite 7 von 16

8 Ref. #141 1 PERINI toilet and kitchen roll rewinder line model Sincro 4.5 (rewinder year 2006), working width mm, with 1 PERINI unwind stand model (year 1983), 1 PERINI 1-color printing station, 1 PERINI double embossing / laminating station model (year 1983), 1 PERINI rewinder model Sincro 4.5 with additional ply-bonding / knurling rollers, 1 PERINI log accumulator for approx. 200 logs, 1 PERINI log saw model 130 (year 1983), furthermore with 1 CASSOLI wrapper model 900R (year 1982), 1 CASSOLI wrapper model PAC110 R2 (year 1983), 1 CASMATIC PAC 602 RT (year 1998), as well as with 1 CASSOLI IN/5 Super, good condition, still in production, immediately available Ref. #147 1 PERINI toilet roll line model 450, working width mm, with 1 unwind stand, 1 embossing station with steel/rubber embossing rollers, 1 ITALCONVERTING P/P embossing station model TT with lamination (year 1998), 1-colour printing unit, rewinder PERINI 450 with integrated tail sealer, log accumulator, 2-lane log saw PCMC (rebuild in 2005 with servo), speed of line approx m / min, as well as with CASSOLI PAC100 R2 wrapping machine (speed approx packs / min. with 4 rolls / pack) and P+S Rianta bag filler (speed bags / min.), as well as with CASSOLI bundler model IN/4A, good condition, ready for demonstration, immediately available Ref. #154 1 TMC toilet and kitchen roll wrapper model QualiWrap 1800ML, year 2008, for 2-40 toilet rolls resp kitchen rolls - single and double layers (additional configurations upon request), with 4-lane infeed, print registration, perforation, bottom (lap) sealing system, speed approx. 120 packs / min., very good condition, still in production, available upon agreement Ref. #158 1 TMC bundler model FBS200, year 2008, infeed pack size mm width and mm length, max. film reel width mm, automatic product infeed, production speed up to 15 bundles / min. (depending on the configuration and dimension of the pack), very good condition, still in production, available approx. 6 months after date of order Ref. #190 1 AMOTEK bag filler model PB127-KR-DX, year 1994, with four lane infeed, grouping station, roll pushing system, automatic bag opening and feeding, sealing station, film waste absorption, outfeed belt, laid out for 3 x 2 and 4 x 2 toilet rolls / pack, production speed approx. 35 bags / min., very good condition, still in production, immediately available Seite 8 von 16

9 Ref. #191 1 OPTIMA bag filler model LBX-4R, year 1993, with four-lane infeed, grouping station, roll pushing system, automatic bag opening and feeding, sealing station, film waste absorption, outfeed belt, laid out for 3 x 2 and 4 x 2 toilet rolls / pack, production speed approx. 35 bags / min., very good condition, still in production, immediately available Ref. #239 1 PERINI toilet and kitchen roll rewinder line model Simplex, year 1993, working width mm, with 2 unwind stands model 48.10, 1 embossing station for micro embossing model 470C, 1 embossing station for DESL embossing model 49.01, rewinder model Simplex 68.81, tail sealer model 560C, accumulator model 511 for 180 logs, log loader, 2 log saws model 140 with Trimex 51.01, production speed of the line 500 m/min. resp. 30 logs / min., with CASMATIC wrapper model CMW 42EV (year 2000, speed 110 packs / min.) and 2 WRAPMATIC bundlers model BFA25, as well as with core winder PERINI 211 incl. core loader, very good condition, immediately available Ref. #240 1 PERINI toilet and kitchen roll rewinder line model Simplex, year 1993, working width mm, with 2 unwind stands model resp , 1 embossing station for DESL embossing model 89.10, rewinder model Simplex 68.81, tail sealer model 560C, accumulator model 511 for 180 logs, log loader, 2 log saws model 164E with Trimex 174E, production speed of the line 500 m/min. resp. 30 logs / min., with CASMATIC wrapper model CMW 42EV (year 2000, speed 110 packs / min.) and 1 WRAPMATIC PW30, furthermore with 2 CASMATIC bundlers model Super H (year 2000) and 1 core winder PERINI 211 incl. core loader, very good condition, immediately available Ref. #247 1 TMC bundler model FBS200, year 1999 (updated on a regular basis), for infeed pack size mm width and mm length, max. film reel width mm, automatic product infeed, production speed up to 15 bundles / min. (depending on the configuration and dimension of the pack very good condition, still in production, available August 2018 Ref. #261 1 PERINI core winder model 270F, year 2002, for 3 stripe cores of mm, with 2 unwind stands model 310 and 320, 45 mm mandrel (size range mm), production speed 75 m. / min., very good condition, immediately available Seite 9 von 16

10 Ref. #263 1 BAOSUO toilet and kitchen roll rewinder line model YD-PL200, year 2014, working width mm, with 2 unwind stands, embossing / laminating station for BRT and KT, rewinder for log diam mm / perforation length mm, tail sealer, accumulator for 132 logs, 2-lane log saw (speed 120 cuts / min.), production speed 200 m/min., very good condition, immediately available Ref. #278 1 PERINI toilet and kitchen roll rewinder line model Alfa, year 1992, working width mm, with 2 unwind stands model 48.11, 1 embossing station for DERL embossing / lamination model (year 2004), rewinder model Alfa with Alfaflex Kit Type B, 2 tail sealers model 560C, 2 accumulators model 511 (for 250 logs), 2 log loaders model 613, 2 log saws model 140 (with upgrade kit Flextron and Trimex model 51.01), furthermore with 1 core winder model 211 and core supply model 622, production speed of the line 600 m/min. resp. 35 logs / min., with 2 OPTIMA bag fillers model LBU3R, 1 CASMATIC bundler model IN5/SH CPVT2 (year 1997), as well as with 1 TECNOIMPIANTI palletizer model P42TR1, very good condition, immediately available Ref. #279 1 PERINI toilet and kitchen roll rewinder line model Alfetta, year 1987, working width mm, with 2 unwind stands model and 48.11, 1 embossing station for P/P embossing / lamination model Speciale (year 1997), rewinder model Alfetta, tail sealer model 560C, accumulator model 511, for 250 logs, log loader model 613, log saw model 163E (with Trimex model 106E), furthermore with core winder model 211 and core supply model 622, production speed of the line 600 m/min. without l amination / 450 m/min. with lamination, resp. 25 logs / min., with 1 WRAPMATIC wrapper model MW42 (year 1998) and 1 WRAPMATIC wrapper PW30, as well as with 1 CASMATIC bundler and 1 OCME palletizer, very good condition, immediately available Ref. #280 1 PERINI toilet and kitchen roll rewinder line model Sincro 6.5, year 1997, working width mm, with 1 unwind stand model 48.50, 1 embossing station model 100 R/S with steel/rubber embossing rollers, 2-color printing station model 79.50, 1 embossing station for P/P embossing / lamination model 49.01, rewinder model Sincro 6.5, tail sealer model 560C, accumulator model 511, for 250 logs, 2 log loaders model 680B, 4-channel log saw model 181E (with Trimex), furthermore with core winder model 211 and core supply model 622, production speed of the line 500 m/min. without lamination / 400 m/min. with lamination, resp. 35 logs / min., with 1 CASMATIC CMW424 wrapper (year 2001) and 1 CASMATIC bundler model IN/5 SuperH, as well as with 1 TECNOIMPIANTI palletizer model P41/SV-D, very good condition, immediately available Seite 10 von 16

11 Ref. #283 1 PCMC accumulator and 1 PCMC 4-lane log-saw model Tetra (one electrical cabinet), year 2000, accumulator for 250 logs, mm working width, log saw for log diam mm, trim removal, speed 120 cuts / min., good condition, immediately available Ref. #314 1 STAX toilet and kitchen roll wrapper model RW1-10 EXT, year 2015, for 1-10 toilet rolls resp. 1 and 2 kitchen rolls (single-layer), 3-lane infeed, size parts for kitchen rolls / pack, additional configurations upon request), with infeed belt, print registration, perforation, bottom (lap) sealing system, speed approx. 120 packs / min., very good condition, immediately available Ref. #325 1 AMOTEK bag filler model PB142-BR, year 1999, with four lane infeed, for packing both horizontal and vertical rolls (upender), grouping station, roll pushing system, automatic bag opening and feeding, sealing station, film waste collection, outfeed belt, presently equipped for toilet rolls / pack, production speed approx. 40 bags / min., very good condition, immediately available Ref. #338 1 DECHANGYU toilet and kitchen roll rewinder line model ZQ-E290, year 2010 (completely re-wired, and re-programmed, with new PLC, drives, gears, and HMI-panel), working width mm, with 2 unwind stands, 2 embossing / lamination stations (1x kitchen towel, 1 x toilet rolls), rewinder for logs of mm diam., tail sealer, 1 accumulator, 1 2-lane log saw with trim removal, production speed of the line 200 m/min. resp. 9 logs / min., with 1 CASSOLI wrapper model PAC930 for toilet rolls, as well as with 1 HAYSSEN bundler, still in production, immediately available Ref. #339 1 SCHNEIDER horizontal case packer model HCP-4V1P, year 2011, box sizes min. 46 x 25 x 32 cm, max. 76 x 51 x 56 cm, 5-lane infeed, automatic product stacking, collating, and loading station, speed 11 boxes / minute, excellent condition, immediately available Seite 11 von 16

12 Ref. #340 1 PERINI toilet and kitchen roll rewinder line model Delta, year 1989, working width mm, with 2 unwind stands, 1 point/point embossing / lamination station model 49.20, 1 printing station model 63.72, rewinder Delta for logs of mm diam., tail sealer model 65.30, accumulator model 513 for 170 logs, 2-lane log saw model 164E incl. Trimex (year 1996), speed 450 m/min. resp. 25 logs / min., with 1 CASSOLI PAC602-R and 1 CASSOLI PAC110 wrapper, 1 CASSOLI MAC50 handle applicator, 1 CASSOLI IN/5D bundler, as well as with 1 core winder model 200, very good condition, still in production, immediately available Ref. #341 1 CASMATIC toilet and kitchen roll wrapper model MW42, year 1998, for equipped for kitchen rolls / single and double layers (additional configurations upon request), with 4-lane infeed, print registration, perforation, bottom (lap) sealing system, speed approx. 100 packs / min., very good condition, immediately available Ref. #368 1 STAX toilet and kitchen roll wrapper model RW1-8 EXT, year 2013, for 1-10 toilet rolls resp. 1 and 2 kitchen rolls (single-layer), 2-lane infeed, size parts for 2-4 toilet rolls / pack (additional configurations upon request), with infeed belt, print registration, perforation, bottom (lap) sealing system, product outfeed belt and upender (belt system), speed approx. 100 packs / min., very good condition, still in production, available mid July 2018 Industrial Roll Rewinders Ref. #204 1 PERINI industrial roll rewinder model E1006 for industrial rolls with and without cores, working width mm, year 1989, with 1 integrated unwind stand, embossing station with steel/rubber embossing rollers, additional ply-bonding / knurling rollers, automatic core insertion (installed in 2009), rewinder (manual start-stop) for log diam mm, tail sealer, speed approx. 400 m/min., with 1 ITALCONVERTING log saw model TRIE 220 for max. log diam. 260 mm, year 1989 (refurbished end of 2015, with electronic cutting length adjustment), speed approx. 60 cuts / min., good condition, still in production, immediately available Seite 12 von 16

13 Ref. #269 1 PERINI industrial roll rewinder model Rollexina, working width mm, with 1 unwind stand (max. reel diam mm), 1 embossing station model 1033 with steel/rubber embossing rollers, 1 embossing / lamination station model 431G, edge embossing station (knurling rollers), automatic core feeding, automatic rewinder model Rollexina 532C for log diam mm, tail-sealer model 68.70, max. production speed 400 m/min., very good condition, immediately available Ref. #285 1 PERINI industrial roll rewinder model E1002, working width mm, with 1 unwind stand, 1 embossing station with steel/rubber embossing rollers, edge embossing / ply-bonding (knurling rollers), stop-start rewinder for log diam mm, with integrated length slitter device for big and high density logs, speed max. 350 m/min., with roll-down table, furthermore with 1 CONSANI log saw model with blade diam. 810 mm, speed 35 strokes / min., as well as with 1 MICROLINE wrapper (year 2001) and 1 PERKIN core winder (year 1999), fair condition, still in production, immediately available Ref. #306 1 PERINI industrial log saw model 112D Big Blade, year 2005, for a max. log diam. of mm, blade diam mm, with automatic log clamping, trim removal, machine adjustments (e.g. cut-off length, trim) via operator panel, speed max. 80 strokes / min. (depending on log diameter and density), as well as with log-loader / roll-down table, very good condition, immediately available Ref. #318 1 PERINI industrial log saw model 112D Big Blade, year 2005, for log diameters of mm, blade diam mm, with automatic log clamping, trim removal, machine adjustments (e.g. cut-off length, trim) via operator panel, speed max. 80 strokes / min. (depending on log diameter and density), very good condition, available upon request Ref. #365 1 UNITED CONVERTING industrial roll rewinder model S60, year 2006, working width mm, with 1 unwind stand, 1 embossing station with 1 set of steel/rubber embossing rollers (standard pyramidical pattern), edge embossing station (knurling rollers), automatic start-stop rewinder model S60 for log diam mm, max. production speed 550 m/min., with log conveyor and rolldown-table, as well as with log saw model T35 for logs of max. 350 mm diam. (depending on density), furthermore with PAF-INTERPACK stacker, wrapper and shrink tunnel, very good condition, still installed and ready for demonstration, immediately available Seite 13 von 16

14 Ref. #366 1 UNITED CONVERTING industrial roll rewinder model S60, year 2008, working width mm, with 1 unwind stand, 1 embossing station with 2 sets of steel/rubber embossing rollers (standard pyramidical pattern and square pattern), edge embossing station (knurling rollers), automatic startstop rewinder model S60 for log diam mm, max. production speed 550 m/min., with log conveyor and roll-down-table, as well as with log saw model T35 for logs of max. 350 mm diam. (depending on density), furthermore with PAF-INTERPACK stacker, wrapper and shrink tunnel, very good condition, still installed and ready for demonstration, immediately available Ref. #367 1 PERINI Compact 716B toilet / medical roll rewinder in mm working width, year 2004, with core magazine, unwind stand, embossing station with rubber/steel embossing rollers, rewinder head, tail sealer, integrated log saw (2-lanes / 1 lane used, with Trimex), speed approx. 350 m/min., roll diam mm, perforation length 400 mm (adjustable*), good condition, as well as with PERINI core winder and 1 BVM wrapping machine incl. shrink wrapper, still installed and ready for demonstration, immediately available Handtowel Machines Ref. #372: 1 HOBEMA C-fold handtowel line model 20C-8, 8-lanes / product size 23 x 33 cm, year 1988, working width mm, with 1 unwind stand model 140C, embossing station model 74A. with two sets of embossing rollers (1x steel/steel / 1 x steel/rubber), 7 length slitters, 8 C-folding plates (single- C-fold), cross-cutter with rotary upper knife and fix lower knife (size range cm), two collecting stations for counting and stacking of the folded sheets, automatic transfer, max. speed 190 m/min., furthermore with 1 CASSOLI wrapper (film banderoles) model PAC/020/BND and 1 PRODEC case packer, very good condition, still installed, immediately available Facial Tissue Machines Ref. #298 1 HOBEMA facial tissue interfolder model 10A-1, year 1987, 480 mm working width, with 2 driven unwind stands, embossing station incl. two sets of steel/paper embossing rollers, ply-bonding station (knurling rollers), length slitter for 2-lane operation, interfolder (210 mm cut-off), products discharge incl. stack marking, furthermore with 1 JACOB, WHITE cartoner model R300, production speed approx. 22 clips / min., fair condition, immediately available Seite 14 von 16

15 Ref. #320 1 DCM EPOCHIEF facial tissue interfolder for V-folded products, year 1993, cut-off length 210 mm, with 1 unwind stand for two rolls, ply-bonding (knurling rollers), length slitters, interfolder (V-fold, clean-cut), manual transfer, speed 80 m/min., MENEGATTI cartoner machine (year 1994) for regular boxes, further-more with CERMEX case packer model SB28.80 (year 2009), very good condition, immediately available Ref. #347 1 DCM EPOCHIEF facial tissue interfolder for V-folded products, year 1997, mm working width, cut-off length 210 mm, with 2 MTC unwind stand, ply-bonding (knurling rollers), interfolder (Vfold, clean-cut), GIESSE automatic transfer, speed 80 m/min. resp. 7 logs / min, as well as with 1 PERINI log saw, furthermore with 1 CASSOLI cartoner model PK61 (year 1995), speed 40 boxes / min., upon request with 1 MICROLINE case packer model ROM 600P (year 2006) and 1 OCME palletizer, good condition, immediately available Ref. #361 1 DCM EPOCHIEF facial tissue interfolder for V-folded products, year 1997, mm working width, cut-off length 210 mm, with 1 unwind stand, ply-bonding (knurling rollers), interfolder (V-fold, clean-cut), manual transfer, speed 80 m/min. resp. 7 logs / min, as well as with 1 GIESSE log saw, 1 LANGENPAC cartoner, speed 50 boxes / min., upon request with 1 MICROLINE case packer model ROM 600P (year 2006), good condition, immediately available Miscellaneous Ref. #20 1 MANZONI place-mat machine, year 1991, product size 30 x 40 cm, with 2 unwind stands, 2 x 2 colour printing (for 2-colour printing / 2 material webs resp. 4-colour printing / 1 material web), embossing station with 1 set of steel/paper embossing rollers (linen embossing pattern), cutting, counting and stacking station, delivery table, speed approx. 100 m/min., good condition, immediately available Seite 15 von 16

16 Ref. #75 1 PRODEC case packer model BCF-40, year 1987, with infeed, case forming / erection station, automatic product stacking, collating, and loading station, box closing system by means of tape, outfeed belt, presently set for packing napkins / box size 680 x 400 x 480 mm, good condition, ready for production, immediately available Ref. #99 1 KEESE PERFECT 4 coaster machine, year approx (continuously maintained and modified), for 2 color-printing (printing units overhauled), max. web width 225 mm, max. printing size 280 x 225 mm / 1-colour resp. 140 x 225 / 2-colours, frequency-controlled main drive motor, speed approx. 60 x 2 wide per minute, very good condition, still in production, immediately available Ref. #162 1 KFA coaster machine, overhauled, for 2 color-printing, for max. web width 225 mm, max. printing size 280 x 225 mm / 1-colour resp. 140 x 225 / 2-colours, frequency-controlled main drive motor, speed approx. 60 x 2 wide per minute, many tools and spare parts, very good condition, ready for production, immediately available Ref. # lane SERV-O-TEC folding machine model servo-flex 804/660, year 1997, for ¼-fold sheets in a size range of cm (V- and Z-fold), with driven unwind stand, web aligner, calendaring unit, embossing station (without rollers), folding station with 3 lengths slitters, V- and Z-fold length folding plates, turning station for products without length-fold, folding cylinders in a size range of cm, automatic transfer and delivery chain, speed approx sheets / hour resp. 40 packs / min. (whatever is reached first), very good condition, immediately available TISSUE TEC Sales & Service GmbH / (WT) Seite 16 von 16