elcome to the Wood Beaver Forestry Equipment Catalog
|
|
- Hubert Higgins
- 6 years ago
- Views:
Transcription
1
2 Thank you for taking the time to inquire about the WOOD BEAVER Forestry Products. Resource Recovery Systems has been with the forestry industry for over 15 years, servicing & selling all types of forestry equipment. We are the North American Distributor for the Finland based forestry equipment manufacturer, Maaselän Kone Oy. We are excited to introduce the Hakki Pilke Wood Beaver Forest machinery equipment line. We looked for a unit that was small, affordable, well built and versatile all in one processor and we found it with the Wood Beaver Firewood Processors. The processors are manufactured in Finland and the manufacture produces over 3500 units a year and are by far the largest manufacture of Firewood Processors in the world. There are a variety of models to fit everyone s need. From hydraulic splitters to chainsaw or circular saw operated cutting models. All models are PTO driven, but can be upgraded to a 19hp diesel or 24hp gas motor. They have the fastest splitting time on the market, only 2.8 seconds! Our best selling unit is the 1X37, an all in one in-feed, saw, splitter and conveyor. We entered this machine at the 2007 Sawmill & Woodlot Firewood Processing Competition in South Carolina. The 1X37 processed full cords in 18 min. 10 sec. (7.84 cords/hr) with a setup time of 1 min. 20 sec. and a tear-down time of 54.4 sec. Proving to be the fastest and most affordable processor on the market! The Resource Recovery sales team is always there ready to help, whether its with information before the sale and during the sale or support after the sale with warranty or technical questions. Enclosed are a pricing sheet and a DVD. You can also view the machines on the web at WOODBEAVER.NET. We look forward to serving you, and answering any questions you may have, or sales@rrsinc.net. Regards, Resource Recovery Systems, Inc. Scott, Jeni, Mark, Mike, Larry, Becky, Kari and Mike. elcome to the Wood Beaver Forestry Equipment Catalog 2
3 THE FIREWOOD FACTORY WITHIN MINUTES OF ARRIVING ON SITE THE MACHINE IS READY FOR OPERATION Three easy to operate hydraulic control levers control the: - infeed and cross of the wood. - the height adjustment of the splitting blade. - the raising and lowering and side shift of the discharge conveyor. The discharge conveyor folds and shifts hydraulically both vertical and horizontally. The infeed conveyor is raised and lowered using a self locking hand winch. Optional 12 way wedge Radial stacking conveyor. The discharge conveyor is moved hydraulically through an arc of 7 2. Logs, to measure: Precise optical measuring of the log length. The hydraulic actuated clamp roll keeps the log firmly on the cross cut deck. TECHNICAL SPECIFICATIONS: Saw Bar: 20 (404) Power Demand: 40+ PTO HP / 15KW 540 PTO Output bulk/hour: 2-3+ cords/hour Splitting Blade (Standard) 8-Way splitting blade Optional 4, 6, 8 & 12 Way Wedge Max diameter of logs: 18.5" Hydraulic pressure: 2500 PSI Volume of oil tank: 33 gallon oil included as Standard Length of conveyor in work position: 13 Length of infeed conveyor: 8 5 *Hydraulic Radial Stacking Conveyor Weight: 3500 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic Log-stand - Hydraulic operated infeed deck - Optional Multispeed 3
4 Cutting: Splitting: Safety: Positive mechanical power transfer. Cutting chain can be stopped at any time. Green Speed splitting system - Technology for high productivity with minimum power regardless of log diameter. Protective covers (splitting and cutting) must be closed for the machine to work. Opening the covers will stop the machine. Service points are Inclined feed conveniently conveyor holds the accessible under protective log in the right place. covers. Spring loaded pressure wheel holds the log in place. Splitting axe with last release - axe can be changed rapidly. The length measuring stopper moves providing a smooth cut and allowing the piece to fall neatly into the chute. TECHNICAL SPECIFICATIONS: Conveyor belt is run by a hydraulic motor at the top of the conveyor, which the speed is adjusted on the control panel. Radial stacking conveyor. The splitting channel has a grid underneath which allows the split firewood to stay clean of splinters and waste wood. Saw Bar: 18 (3/8, 68 links) Power Demand: 20 HP / 10 kw 540 PTO Output bulk/hour: 1-2 full cords/hour (based on 128 cu ft.) 2 and 4 way Splitting Blade included as Standard Optional: 6 & 8 Way Wedge Max diameter of logs: 17.5" Splitting Force: 8,378 to 29,101 lbs Hydraulic pressure: 2800 PSI Volume of oil tank: 17 gallon oil included as Standard Length of conveyor in work position: 13 Length of feed conveyor: 7 2 Weight: 2,348 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic adjustable splitting blade - Hydraulic Log-stand - Portable power pack 4
5 Cutting: Splitting: Positive mechanical power transfer. Cutting chain can be stopped at any time. Safety: Splitting executed by two splitting units. Maximum production regardless of the size of the wood has been achieved by using the power and speed transformer. The length measuring stopper moves providing a smooth cut and allowing The piece to fall neatly into the chute. Protective covers (splitting and cutting) must be closed for the machine to work. Opening the covers will stop the machine. Conveyor belt is run by a hydraulic motor at the top of the conveyor, which the speed is adjusted on the control panel. The splitting channel has a grid underneath which allows the split firewood to stay clean of splinters and waste wood. Dual Splitting Axes can be changed rapidly. Service points are conveniently accessible under protective covers. Inclined feed conveyor holds the log in the right place. Spring loaded pressure wheel holds the log in place. TECHNICAL SPECIFICATIONS: Saw Bar: 16 (.325, 66 links) Power Demand: 20 HP / 10 kw 540 PTO Output bulk/hour: 1-2 Full cords/hour (based on 128 cu ft.) 2 and 4 way Splitting Blade included as Standard Optional: 6 Way Wedge Max diameter of logs: 15.5 Splitting Force: 12,787 and 21,164 lbs Hydraulic pressure: 2800 PSI Volume of oil tank: 17 gallon oil included as Standard Length of conveyor in work position: 13 Length of feed conveyor: 7 2 Weight: 2,348 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic adjustable splitting blade - Hydraulic Log-stand - Portable power pack 5
6 Wood Beaver 1X Easy - All functions of the machine are operated hydraulically: log feed, cross-cutting and height adjustment of the splitting blade. Firewood Faster, Safer, Easier Adjustable Folding Discharge Conveyor: The 13 conveyor folds easily for transport. Conveyor height is adjusted with a hand operated selflocking winch. Interchangeable Wedge Standard wedge the wood can be split into 2 or 4 pieces. A 6 way wedge is an option. 6 During cutting the measuring disc deflects, enabling the log to drop down unobstructed. Maintenance: The sawbar cover is opened using a wrench. This allows easy access for maintenance. Infeed Conveyor: The Feed Conveyor carries the log into the machine. The log infeed can be stopped and reversed. Foot operated splitting for the last piece of log. TECHNICAL SPECIFICATIONS: Saw Bar: 16 Power Demand: 15 HP / 7.5 KW 540 PTO Output bulk/hour: 1-2+ cords/hour 2 & 4 way Splitting Blade (Standard) Optional: 6 Way Wedge Max diameter of logs: 15.5" Splitting force: 7.0 Ton Hydraulic pressure: 2600 PSI Flow of hydraulic pump: 11.6 GPM Volume of oil tank: 10.5 gallon oil included as standard Length of conveyor in work position: 13 Length of feed conveyor: 7 2 Weight: 1500 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic Log-stand - Hydraulic adjustable splitting blade - Portable Power pack
7 Circular saw cutting and hydraulic splitting. A machine with its own hydraulics, using a tractor engine or an optional electric engine as a power source. Logs can be slit into 2, 4 or 6 pieces and removing the cutting blade the small logs can be cut into desired lengths. Cutting with a circular saw. Firewood production made easy! Equipped with PTO shaft and 3mm Loading Conveyor. Crosscut table: Ergonomically correct, balanced crosscut table is fitted with contoured log support rollers. Measurement: Log length can be measured quickly and easily and pre-set to the desired length. The log stop deflects as the log is cut, allowing the wood to fall unobstructed into the splitting chute. Emergency stop: In an emergency, all functions of the machine can be stopped using a foot operated pedal. Splitting Mechanism: As the log drops into the splitting chute it activates the splitting mechanism. When not in use, the conveyor is folded and locked in the vertical position. The machine is now compact for easy transport and storage. TECHNICAL SPECIFICATIONS: Circular Saw: 27.5 (700 mm) Power Demand: PTO, HP / 7.5KW 540 PTO Output bulk/hour: 1 + cords/hour Splitting Blade (Standard) A blade that splits into 2 or 4 pieces Max diameter of logs: 11.8" Hydraulic pressure: 2600 PSI Flow of hydraulic pump: Volume of oil tank: 11.6 GPM 10.5 gallon oil included as Standard Length of conveyor in work position: 10.5 Length of feed conveyor: 7 2 * Includes Hakki Conveyor Weight: 1000 lbs. Optional Equipment: - Log Rack - Portable power pack -Blades: Tungsten Carbide Tipped Blade Standard Blade - Hardened Steel 7
8 NEW! Hydraulic sawbar, hydraulic discharge conveyor and hydraulic splitting. Compact size makes it easy to move and transport. Hawk is available with a combustion engine (Honda), tractor drive or electric drive. Transportation: Compact size Easy transport Fast into operating condition Discharge: Hydraulic discharge conveyor Hydraulic Sawbar. 6-way blade: A 6-way blade produces firewood in an instant. TECHNICAL SPECIFICATIONS: Sawbar: 13 Power Demand: 540 PTO / 15 PTO HP or 13 HP Gas Honda Output bulk/hour: 1 + cords/hour Splitting Blade (Standard) A blade that splits into 2 & 4 pieces Optional: 6 Way Wedge Max diameter of logs: 11.5" Hydraulic Pressure: 2900 PSI Length of conveyor in work position: 10 Length of feed conveyor: 6 * Includes Hakki Conveyor Weight: 1000 lbs. 8
9 The traditional way of wood splitting. Cut the log with the circular saw and use the splitting cone to split it. Powered by tractor engine, electric drive or combustion engine. HAKKI PILKE eagle for large and small logs. It is easy to use & transport. Emergency stop in accordance with CE safety regulations. Stops in 5 seconds. 6.5 horsepower combustion engine 4 KW electric drive. Ergonomically correct splitting rack for small and large logs. TECHNICAL SPECIFICATIONS: Circular Saw: 27.5 Power Demand: 540 PTO or 6.5 HP Gas Honda Output bulk/hour: 1 cords / hour Splitting Blade (Standard) A splitting screw with changeable tip Max diameter of logs: 11.5" Weight: 400 lbs. Options: 6.5 hp Gas Honda 9
10 100 A solution for splitting large logs. Instant adjustment of the height of the splitting blade enables splitting into two or four pieces. The length of the splitting motion is adjustable according to the length of the log. Splitting with just one motion and without splinters. Adjustment of the splitting blade Easy to control: Pull the levers together and the splitting starts. Returns back into starting position automatically. No splinters: With a single splitting motion the log is halved splinterlessly. Splitting Blade: The height of the splitting blade can be easily adjusted (four-way splitting is possible) The splitting action can be steplessly adjusted according to the length of the log. TECHNICAL SPECIFICATIONS: Hydraulics required: Single function Required oil flow and oil pressure: 5.28 gal/min, 2610 PSI Splitting cylinder diameter: 70mm/ 2.75 in Adjustable Splitting Length from 10 to 42 10
11 Triple your profits with a Wood Beaver Firewood Bundler The Wood Beaver Firewood Wrapper System is designed to quickly stretch-wrap bundles of firewood. These machines are designed to wrap firewood from 12 to 24 long. The tension spring clutch adjusts how tight the wrap stretches. The proper tensioning of the clutch spring nearly doubles the length of the wrap. This produces a clean, economical, self-tightening bundle easily stored & carried. Open ended bundles allow the wood to dry in storage. Beaver Wrapper is fast, 12 to 15 sec actual wrap time plus loading & unloading. Rates of 75 bundles and up an hour are common for a single operator on unit. Hold the wrap across the top of the wood bundle and step on the peddle and you are ready to go. - Four drop thru baskets included. (Have one person filling the baskets while the other is wrapping! - Equipped with ¼ HP (40 rpm) electric motor. HD gear reduction. - ONLY available in 3/4 Cubic ft roll of 80 gauge wrap included & sample of handles. - Portable mounted on 8 wheels and rolls like a two wheeler. Width 37, Depth 40, Height 53, Weight 230 lbs. Model: Quick-Load (F.O.B. Hartford WI) $ Units can be custom built to fit your needs - CALL FOR PRICING. Optional sizes will be quoted. The Wood Beaver Twister wrapper makes it easy to personalize your product for pricing and company recognition. Profit calculator for the Wood Beaver Twister Firewood Bundler Wood packages described below are based on a.75 cubic foot bundle 170 packages per cord (each cord based on a 4' x 4' x 8' full cord) 128 cu ft If you sell your cordwood at $150 per cord you will get $15,000 for every 100 cords of wood sold $175 per cord you will get $17,500 for every 100 cords of wood sold $200 per cord you will get $20,500 for every 100 cords of wood sold If you sell your packages at $2.00 per = $ per cord or $20,000 for 100 cords $2.25 per = $ per cord or $22,500 for 100 cords $2.50 per = $ per cord or $25,000 for 100 cords 11
12 A ft roll will wrap approximately diameter bundles with 3 turns or 150 bundles with 4 turns of wrap. Also available for purchase: Web nylon handles Advantages of a Wood Beaver Twister Firewood Bundle Owning a Beaver Wrapper overcomes the problems of customers overloading bushel baskets, wheelbarrows or single armloads. ü The Owner determines the size of the bundle. ü Wrapping with a Beaver Wrapper is faster than bagging. ü Wrapping with a Beaver Wrapper is faster and cleaner than tying with string. ü Stretch wrapping holds wood securely during handling due to its elasticity. ü Open-ended bundles allow the wood to dry in storage. ü 115-volt ¼ horsepower gear motor drive. ü 2-3 year limited Motor warranty. ü Can be used at remote locations with a generator. 7 most profitable & popular income plans: ü ü ü ü ü ü ü On site packaging at customer's location. Sell packaged wood to local retail outlets. Sell to mass merchandisers. Shrink wrap other products. Sell for home heating use. Machine rental to others. Sell to campgrounds. Increase your speed & efficiency with a custom turn table! Call for pricing! 12 Units are palletized and shipped regular truck freight from Hartford, WI. SOME ASSEMBLY REQUIRED This is a great unit for minimal cost. Credit Cards ACCEPTED VISA / MASTER CARD CALL WITH ANY QUESTIONS
13 Available Options Choose from many different options to add to your Wood Beaver Firewood Processor. Wedges A blade for splitting logs into 6 parts. The blade will be installed into a firewood processor instead of the standard 4-way splitting blade. The picture shows a 1X37 6-way blade. Z Wedges 2-way wedge - std 4-way wedge - std 1X37 wedges 2-way wedge - std 4-way wedge - std 6-way wedge - opt Green Speed wedges 6-way wedge 8-way wedge 12-way wedge 60 oh wedges 4-way wedge - std 6-way wedge - opt 1X37 Hydraulic Log Lifter The wood lifting device lowers hydraulically down to the ground, so you can easily roll the tree trunks on to it and lift them conveniently on to the infeed conveyor. 1X37 Log rack Available in Manual & Hydraulic A log rack that can be easily filled from a loader. Just as easily you can move the trunks onto the infeed conveyor. Hydraulic Feeding Table -Live Deck Fits BigX47, 1X37, and Green Speed Models. Hydraulic feeding table 2 m. Strong link chains transfer the logs to the sorting mechanism by means of which the logs are transferred to the toothed transfer rollers. The rollers and the infeed conveyor of the machine transfer the tree for cutting. The deck is controlled from the machine. Extension for Hydraulic Feeding Table Add an additional 9.8 ft to your feeding table. Big X wedges 6-way wedge - opt 8-way wedge - std. 12-way wedge - opt. 60 oh Blades -Tungsten Carbide Tipped Blade Standard Blade Hardended Steel 1X37 Infeed Extension Standard and Easy Models Add an additional 3 feet to your 1X37. Sacking rack Sacking rack or support frame, where you can drop firewood directly from the conveyor. Holds 1.1 Metric yards. (just under 1 face cord) Net sack Sold in packs of 50 or 100 Net sacks for firewood make handling easier and speed up drying. Holds 1.1 Metric yards. (just under 1 face cord) 13
14 Portable Power Take-off and Hydraulic Units These units don t only save you time, they save you money. Uses *Run Wood Beaver firewood processors *Operate PTO elevators Hydraulic Models *Operate log splitters *Operate hydraulic elevators *And many other hydraulic and PTO powered equipment Model 24-HD ELH - PTO Only The Beaver Hard working unit with the power to run the 1X37 and lower models or other equipment requiring more PTO horsepower. Approx. 325 lbs. Model D-19-HD PTO Only Heavy duty diesel unit. More powerful and less expensive to run and maintain than a gas model. Lombardini Air cooled/diesel, 3600 rpm Approx. Dry weight: 325lbs. PTO Adjustable Height Stand Adjusts from Special orders please give 4 to 6 weeks processing time. Optional Accessories: * Light kit * Tach/proofmeter * 12V remote electric solenoid valve Model # (indicates horsepower) Low RPM - Full Throttle High RPM - Full Throttle Starting System Main Frame Width Gallons Per Minute PSI Price 24 -HD ELH PTO only :1 reduction :1 reduction Electric 58 N/A N/A Call for pricing D-19-HD Electric 58 N/A N/A Call for pricing 14
15 Hartford, Wisconsin Dealers wanted! Inquire by sending an to or call Financing made easy! Resource Recovery Systems works with you to accommodate your finance needs. We work closely with leasing companies from purchase start to finish. P.O. Box 97 Ada, MI * Save time and conserve your working capital * Minimal down payment * Flexible terms * Prompt dependable service Zach Doohen 101 N Main Ave Suite 215 Sioux Falls, SD Fax zach@yourcapitalpartner.com Terry Marc 2912 Pioneer Rice Lake, WI tmarc@agstar.com Steve or Jeff 19 N. Pearl Street Suite 2 Covington, OH Warranty: All units come with a one (1) year warranty on parts. Parts & Service: We service and carry parts on all models we sell. Call for Service or Warranty issues. 15
16 Bundler Picture here Distributor: Dealer: P.O. Box , 1117 Western Drive Hartford, WI
FIREWOOD PROCESSORS.
FIREWOOD PROCESSORS www.maaselankone.fi FIREWOOD PROCESSORS The Best Firewood Processing Technology There Is! Maaselän Kone Oy is a Finnish company with more than 30 years experience of manufacturing wood
More informationWe should have had. Wood Beaver Eager Beaver 20 SPLITTER. 54 Sawmill & Woodlot
SPLITTER Wood Beaver Eager Beaver 20 Manufacturer Multitek North Americ LLC 375 Progress St. Prentice, WI 54556 ph: 800/243-5438 www.woodbeaver.net Machine Operator Scott Eifler Assistant Kevin Keiser
More informationRANGE OF PALAX FIREWOOD PROCESSORS
COMBI M II - 3 KS 35-6 POWER 70S - 10 POWER 100S - 14 RANGE OF PALA FIREWOOD PROCESSORS Common features Discharge conveyor A common feature of all machines is the redesigned, 4,3 m long and 0,2 m wide
More informationRugged Powerful Durable
Professional Grade Wood Splitters Rugged Powerful Durable Made in the USA UP TO 48 Mighty Profitable Splitters IDEAL FOR LANDSCAPE MAINTENANCE AND RENTAL Mighty Ox splitters are compact, powerful and
More informationQuality Built for High Performance
Quality Built for High Performance Split-Fire wood splitters offer quality workmanship and design that requires much less power to split wood while offering greater operator safety. Ton-for-ton, Split-Fire
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationSAWING CATALOG. GRAINGER.COM/CHOICE l Grainger
SAWING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger BENCH MITER BAND SAW A bench top band saw comes with large cutting capacities. Easy to move and position where needed this lightweight bench unit is
More informationTHE LOG SPLITTER YOU WILL ENJOY USING.
BY CENTRAL BOILER THE LOG SPLITTER YOU WILL ENJOY USING. STRYKER log splitters offer quality workmanship second to none. Because of their unique design and manufactured finish, they require much less power
More informationTHE LOG SPLITTER YOU WILL ENJOY USING.
BY CENTRAL BOILER THE LOG SPLITTER YOU WILL ENJOY USING. STRYKER log splitters offer quality workmanship second to none. Because of their unique design and manufactured finish, they require much less power
More informationVERTICAL BANDSAWS. A Line of Quality Constructed, Heavy-duty Tilt Frame Miter Saw and Vertical Bandsaws 20 to 40 Throat
VERTICAL BANDSAWS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 VERTICAL BANDSAWS A Line of Quality Constructed, Heavy-duty Tilt Frame Miter Saw and Vertical Bandsaws 20 to 40 Throat TILT FRAME
More informationTRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
More informationCarbide Circular Sawing Systems. P-70B Min. 5/8 Max Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max.
Carbide Circular Sawing Systems P-70B Min. 5/8 Max. 2.75 Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max. 6 Capacity Carbide Circular Saws Standard Features Include Servo Driven Automatic
More informationHeavy Equipment Solutions
Heavy Equipment Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and
More informationModel PM Series Three Axis Mills
Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide
More informationWELDING POSITIONING EQUIPMENT
WELDING POSITIONING EQUIPMENT It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT designs
More informationP225 STANDARD FEATURES OPTIONAL FEATURES
CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood
More informationEMB MANUFACTURING INC.
TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144
More informationVIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK
VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK 31 SUN PAC BLVD. BRAMPTON ONTARIO L6S 5P6 PHONE: 866-501-5484 FAX: 905-458-5484 TABLE OF CONTENTS Specifications Page 1 Engine Assembly Page 2 5 Base Section
More informationDesigned to cut extra-wide keyways, stress relief pockets, motor mounts slots, and more.
KM4000 Keymill 2013 10 KM4 Designed to cut extra-wide keyways, stress relief pockets, motor mounts slots, and more. A compact, rugged, portable milling machine, the fully CE-Compliant KM4000 Portable Key
More informationCOMMERCIAL KINETIC LOG SPLITTER
COMMERCIAL KINETIC LOG SPLITTER Tested and Proven with Commercial Firewood Producers 2-second Cycle Time Up to 6X Faster than Hydraulic Splitters The Woods Advantage Best-in-class Ergonomics and Efficiency
More information1 / 47. Hakki Pilke 50 Pro. The operator must read and understand these instructions before operating the machine!
ENGLISH 1 / 47 Hakki Pilke 50 Pro FIREWOOD PROCESSOR Instructions for assembly, operation and maintenance EC Declaration of Conformity Safety instructions Guarantee terms The operator must read and understand
More informationANGLE AND FLAT BAR LINE ABL-74T
ANGLE AND FLAT BAR LINE ABL-74T ABL-74T The ABL-74T is our most economical, entry level machine for punching and shearing angle and flat bar. It has a combination of features requested by our customers.
More informationSection Content. Power Turntable Manual Turntable Low Profile Manual Turntable Optional Equipment and Devices
s Section Content Power Manual Low Profile Manual Optional Equipment and Devices P.O. Box 352 Alpena, Michigan 49707 Phone 989.358.7000 Fax 989.358.7020 info@omni.com www.omni.com 105 TT s WHY TT? Provide
More informationKentwood M509X 5 Head Moulder
TECH SPEC MS 31513 PAGE 1 Kentwood M509X 5 Head Moulder The Kentwood M509X 5 Head through feed Moulder s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationHakki Pilke OH 27. The operator must read and understand these instructions before operating the log splitter!
English Hakki Pilke OH 27 LOG SPLITTER Instructions for assembly, operation and maintenance EU Declaration of Conformity Safety instructions Warranty terms The operator must read and understand these instructions
More informationLOG SPLITTER PROJECT REFERENCE NO. : 37S0913
LOG SPLITTER PROJECT REFERENCE NO. : 37S0913 COLLEGE : SRINIVAS INSTITUTE OF TECHNOLOGY, MANGALORE BRANCH : MECHANICAL ENGINEERING GUIDE : SADASHIV LALASANGI STUDENTS : SANKESH RAFATH ABDUL RAZAK B E VACHAN
More informationHA-2 INDUSTRIAL UNDERCUTTER INSTRUCTIONS. Caution!
HA-2 INDUSTRIAL UNDERCUTTER INSTRUCTIONS Caution! The Outrigger Assembly MUST be supported and the Pawl Finger, on the Safety Pawl, engaged in the rack BEFORE loosening the two (2) Clamping Bolts. Personal
More informationWELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs.
WELDING POSITIONING EQUIPMENT JMT offers quality machine tools for all your sheet metal fabrication needs. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT sells and services
More informationMEREEN-JOHNSON. 400 Series Fixed Arbor Dip Chain Multiple Rip Saws. Setting the Standard Since 1905
MJ MEREEN-JOHNSON 400 Series Fixed Arbor Dip Chain Multiple Rip Saws Setting the Standard Since 1905 400 SERIES MULTIPLE RIP Setting the Standard Guaranteed Glue Joint Accuracy Minimal Maintenance High
More informationPortable Boring Bars
Portable Boring Bars Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and managing
More informationMS HYDRAULIC GUILLOTINE SHEAR
MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationProcesses MIG (GMAW) Flux-cored (FCAW) DC stick (SMAW) AC/DC TIG (GTAW) Pulsed TIG (GTAW-P)
Multimatic 220 AC/DC Issued Sept. 2018 Index No. DC/12.65 MIG, Stick and AC/DC TIG Package Quick Specs Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home Processes
More informationDrilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
More informationcold saws manual circular cold saws Cut 250 Super Cut 315CE Super Cut 315CE1PH Super Technics 350CE semi-automatic and automatic circular cold saws
cold saws manual circular cold saws Cut 250 Super Cut 315CE Super Cut 315CE1PH Super Technics 350CE semi-automatic and automatic circular cold saws Technics 350SA Technics 350A Euromatic 370S Euromatic
More informationOperation Manual and Parts Book. Wessex Country Log Splitter LS100 Hydraulically Powered, Tractor Mounted. Product Code: LS100
Operation Manual and Parts Book Wessex Country Log Splitter LS100 Hydraulically Powered, Tractor Mounted. Product Code: LS100 Manufacturers and Distributors of Quality Equipment CONTENTS 3...Welcome to
More informationHakki Pilke. Expert 37 / Easy 37
ENGLISH 1 Hakki Pilke Expert 37 / Easy 37 LOG SPLITTER - Instructions for assembly, operation and maintenance - EU Declaration of Conformity - Safety instructions - Warranty terms The operator must read
More informationK E E P I N G T H E W O R L D I N M O T I O N TM P 90 G. Grinding and Hobbing Machine
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G Grinding and Hobbing Machine machine concept P 90 G three grinding methods + hobbing combined in one machine. The P 90 G is a new development based
More informationManual. User 450TR/TRE. TR - Powered by tractor TRE - Powered by tractor/electricity
User Manual 450TR/TRE TR - Powered by tractor TRE - Powered by tractor/electricity TABLE OF CONTENTS 1 Basic specifications and responsibilities... 4 1.1 Foreword... 4 1.2 EU Declaration of Conformity...
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
More informationTH E MARK OF COMPLETE PLANER SATISFACTION
TH E MARK OF COMPLETE PLANER SATISFACTION SINGLE SURFACE PLANER DO U B L E SCREW-ADJUSTED CAPACITY 20" BED x 8",dea' for small shopsr millsr pattern shopsr schoo'sr 'umber yards - as an auxiliary p'aner
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More informationD.C. Hydraulic Power Systems
D.C. Hydraulic Power Systems Bucher Hydraulics M-3000 Series Compact designs, integrated and manifold valve circuits Reference: 500-P-000001-EN-05 Issue: 02.2018 1/144 Contents Page 1 General information...
More informationIndustrial Solutions & Innovation, LLC. Watts Specialties
Watts Specialties Improving Your Pipe Capabilities For Over 30 Years www.watts-specialties.com 24 & 36 Computerized Cutter Specifications W-242 W-244 W-362 W-364 Number of computer drive axis Number of
More informationFERROUS AND NON-FERROUS MATERIAL
Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
More informationMETAL SHEAR SPECIALISTS MS-25-5 HYDRAULIC GUILLOTINE SHEAR
MS-25-5 HYDRAULIC GUILLOTE SHEAR MS-25-5 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationSPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in "
MS-25-10 STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere in the stroke the ram returns to "up" position. Two
More informationOrbital Milling. A Buyers Guide.
A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime and improving
More informationPII140 IRONWORKER PII140
14824 Rockbridge Road Little Rock, AR 72206 Toll Free 800-643-5839 Fax 501-897-4090 www.smfmachinetools.com sales@smfmachinetools.com IRONWORKER 6 1 5 4 2 STANDARD FEATURES 1. Mechanical Stripper Attachment
More informationHakki Pilke Falcon. The operator must read and understand these instructions before operating the firewood
ENGLISH 1 Hakki Pilke Falcon FIREWOOD PROCESSOR Instructions for assembly, operation and maintenance EC Declaration of Conformity Safety instructions Guarantee terms The operator must read and understand
More informationvariety of cuts including chamfers, O-Ring grooves, lens rings and other angular surfaces.
FF6300 FLANGE FACER 6 2015 FF63 Performance. Versatility. Safety. The rigid and versatile FF6300 delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationHakki Pilke Raven 33
ENGLISH 1 Hakki Pilke Raven 33 FIREWOOD PROCESSOR Instructions for assembly, operation and maintenance EC Declaration of Conformity Safety instructions Guarantee terms THE OPERATOR MUST READ AND UNDERSTAND
More informationDCB-S SERIES BANDSAWS DURMA
DCBS SERIES BANDSAWS BETTER PARTS BETTER PROFITS DCBS SERIES BANDSAWS STANDARD EQUIPMENT Twoway 45 Angle Adjustable Clamp Hydraulic Vice Electronic Variable Cutting Speed Adjustment with Inverter Bimetal
More informationSaws & Joiners. A Retail Framer s Guide By Jim Burke
Saws & Joiners A Retail Framer s Guide By Jim Burke Owning the right cutting and joining equipment can help you produce quality frames more efficiently. Here s a look at the current crop of machines designed
More informationCelebrating. 65 Years
Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:
More information1 new Cincinnati Hydraguide tracer lathes
1 new Cincinnati Hydraguide tracer lathes new C incinnati 15 and 18 H ydraguide accurate I versatile / econom ical The Cincinnati Hydraguide tracer lathe automatically, accurately and economically turns
More informationCNC LATHES. HL Series. HL-25, HL-25Durga, HL-25 C-Axis, HL-25DM, HL-25DMS, HL-35, HL /1500, HL-55. CNC Machine Tools
CNC LATHES HL Series CNC Machine Tools www.femcousa.com HL-25, HL-25Durga, HL-25 C-Axis, HL-25DM, HL-25DMS, HL-35, HL-45 1000/1500, HL-55 FEMCO USA Headquarters FEMCO has been manufacturing quality machine
More informationKASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts.
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts. KASTOssb: More Economic Mass Production Cutting. Great performance, efficient footprint. The vertically running saw blade characterizes
More informationSMF & MACHINE TOOLS, INC
SMF & MACHINE TOOLS, INC 800-643-5839 METAL WORKING EQUIPMENT Local 501-897-1110 Fax 501-897-1110 14824 Rockbridge Road Little Rock, AR 72206 www.smfmachinetools.com sales@smfmachinetools.com C. '..-...p
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationSMF & MACHINE TOOLS, INC
SMF & MACHINE TOOLS, INC 800-643-5839 METAL WORKING EQUIPMENT Local 501-897-1110 Fax 501-897-1110 14824 Rockbridge Road Little Rock, AR 72206 www.smfmachinetools.com sales@smfmachinetools.com P II 0 IRONWORKER
More informationSTC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp
STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling
More informationThat s E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25. Universal turning center for the complete machining of small, precision parts
[ That s ] E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25 Universal turning center for the complete machining of small, precision parts EMCO MAXXTURN 25 [Work area] - Spacious - Free chip
More informationHakki Pilke 38 Easy. The operator must read and understand these instructions before operating the log splitter!
English 1 Hakki Pilke 38 Easy LOG SPLITTER Instructions for assembly, operation and maintenance EU Declaration of Conformity Safety instructions Warranty terms The operator must read and understand these
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationAUTOMATIC CIRCLE BURNING AND WELDING
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrapup (Regardless of Direction or Rotation) Oxy-Fuel Cutting Units, Plasma Cutting Units Wire Feeders and Controls, Motorized
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationS80 SERIES CNC SURFACING MACHINES
S80 SERIES CNC SURFACING MACHINES Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. S80 SERIES SURFACING MACHINES The S80 series surfacers are the most
More informationARG 330 plus H.F. OFFER SHEET. Pilous. Železná 9, Brno, Czech Republic Tel.:
OFFER SHEET Pilous ARG 330 plus H.F. Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz A completely new, revolutionary concept of the band saw arm casting
More information(?'7 7 FARREL. Bulletin 1218-B ROLL-TURNING LATHES FARREL COMPANY, DIVISION OF USM CORPORATION, ROCHESTER, N.Y.
(?'7 7 FARREL Bulletin 11-B ROLL-TURNING LATHES FARREL COMPANY, DIVISION OF USM CORPORATION, ROCHESTER, N.Y. r Tracercontrolled lathe Installation view of 6 " lathe, shown turning a 51 % " x 10" blooming
More informationS8M S7M. Soft Touch Buttons with LED Lights Soft Touch Buttons light up a LED once pressed - simplifying operation.
S8M surfacing machines Soft Touch Buttons with LED Lights Soft Touch Buttons light up a LED once pressed - simplifying operation. S8M with Large Diesel Block Solid Steel Way Guards Heavy duty sliding steel
More informationControl Panel: The Electronic Power Crossfeed System converts
The Electronic Power Crossfeed System converts the standard Super Duty Saw from manual carriage control to a semi-automatic carriage feed. It is designed to produce the best possible result of cut quality,
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationDCB-DM SERIES BANDSAWS DURMA
BETTER PARTS BETTER PROFITS STANDARD EQUIPMENT Hydraulic Vice Synchronized Cutting Arm & Clamp System Bilateral 60 Angled Cut Digital Readout of Turn Table Motorized Turn Table Electronic Variable Cutting
More informationCOIL PROCESSING & SHEARING SYSTEMS
COIL PROCESSING & SHEARING SYSTEMS GREEN SOLUTIONS REDUCTION OF RAW MATERIAL COST Cost of material in coil is 15 20 % less than cost of material in blanks REDUCTION OF SCRAP MATERIAL Instead of fixed sized
More informationOperating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table
Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright
More informationSubArc Digital Series
Digital Series Issued Oct. 016 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes
More informationPLS-1-18R PLASTICS GATE CUTTING DEGATING ROBOTICS\AUTOMATIC
PLS-1-18R PLASTICS GATE CUTTING DEGATING ROBOTICS\AUTOMATIC www.simonds-inc.com view: youtube.com/simondsinc May 18, 2018 1 For over thirty years Simonds Inc. has been the acknowledged leader in ergonomic
More informationHakki Pilke Falcon 35
ENGLISH 1 / 41 Hakki Pilke Falcon 35 FIREWOOD PROCESSOR Instructions for assembly, operation and maintenance EC Declaration of Conformity Safety instructions Guarantee terms The operator must read and
More informationMultiplex W-200 S E R I E S W-200 W-200Y
Multiplex W-200 S E R I E S W-200 W-200Y Advanced features of the MAZATROL SmoothG CNC Z1 Y1 (W-200Y) Y2 (W-200Y) Z2 Touch screen operation Operate similar to your smart phone / tablet X1 X2 PC with Windows
More informationSubArc Digital Series
Series Issued Feb. 0 Index No. AD/. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged
More information14824 Rockbridge Road Little Rock, AR Toll Free Fax
14824 Rockbridge Road Little Rock, AR 72206 Toll Free 800-643-5839 Fax 501-897-4090 www.smfmachinetools.com sales@smfmachinetools.com IRONWORKER STANDARD FEATURES 1. Urethane Stripper Attachment keeps
More informationTouch Screen CNC Control
Touch Screen CNC Control FEATURES Nearly four decades ago, Rottler pioneered automation and programming by utilizing electronics and computers. Today, the SAD Surfacing machines incorporate the latest
More informationChoosing, Designing, & Building a Hydraulic Log/wood Splitter
Choosing, Designing, & Building a Hydraulic Log/wood Splitter Part 1 - "Deciding on what type of log/wood splitter will best fit your needs" - Covers 4 common styles of hydraulic log/wood splitter & pros/cons
More informationThe Highest Quality Staple System on the Market
FLEXCO XP Staple Belt Fastening System The Highest Quality Staple System on the Market The Flexco XP Staple Belt Fastening System combines an enhanced applicator tool with the longest wearing staple fastener
More information30AUTO Speed Lathe Manual
30AUTO Speed Lathe Manual Standard Features 3/4 HP Motor Air-Collet Closure 1800 RPM, Single Speed Electric Brake Cast Housing 5C Collets 3 Phase / 240 Volts DESCRIPTION: The Crozier Model 30AUTO Automotive
More informationCADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationOPERATING INSTRUCTIONS PALAX Power 100 powered by tractor powered by electricity swing conveyor of 4.3-metres with hydraulic motor
OPERATING INSTRUCTIONS PALAX Power 100 powered by tractor powered by electricity swing conveyor of 4.3-metres with hydraulic motor SERIAL NUMBER YEAR OF MANUFACTURE Palax Lahdentie 9 FI-61400 Ylistaro,
More informationMotorcycle Lift Assembly Instructions
Motorcycle Lift Assembly Instructions Copyright JCS 2009 Rev1M Page 1 Lift Table Assembly Instructions The following pages will assist you in the construction of your Motorcycle Lift Table. You will find
More informationDURMA BANDSAWS HB & DCB SERIES
DURMA BANDSAWS HB & DCB SERIES BETTER PARTS BETTER PROFITS The Company As a total supplier for sheet metal manufacturing with almost 60 years of experience, Durma understands and recognizes the challenges,
More informationStrongman Metal Tools Price list February 2018
Strongman Metal Tools CC CK 2004/095733/23 CALL ANDRIES FOR EXPERT ADVICE 083 327 9988 or 087 135 2229 Soli Deo Gloria info@strongman.co.za Strongman Metal Tools Price list February 2018 PLEASE NOTE PRICES
More informationHydraulic Clamp Carrier. Installation & Operation Manual
Hydraulic Clamp Carrier Installation & Operation Manual Hydraulic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationPalax 55. Instruction manual Spare parts catalogue PALAX 55. manufacture. Serial No. Year of. Machine. 3- phase 380V
Palax 55 Instruction manual Spare parts catalogue Machine PALAX 55 Serial No. Year of manufacture Type TR 3- phase 380V PM 2 1.0 Contents 3 1.1 Foreword 5 1.2 EU Declaration of Conformity 5 1.3 Intended
More informationKKS Circular Sawing Machines
If Steel is Your Deal! KKS Circular Sawing www.kaltenbach.com 1 The complete KALTENBACH program for metal processing 2 www.kaltenbach.com 3 The Economical One Applications: locksmith s shop, metal construction,
More information