Relays. Switching & Controls. Selection Guide

Transcription

1 Switching & Controls Selection Guide... 7 General Purpose Relays... 7 RVH Series mm Interface Relays... 7 RJ Series Slim Power Relays... 7 RQ Series PCB Relays... 7 RH Series Compact Power Relays RR Series Power Relays... 7 RU Series Universal Relays RY/RM Series Miniature Relays... 7 RFV Force Guided Relays... 0 Solid State Relays... RSC Series Solid State Relays... RSS Series Panel Mount Solid State Relays... Relays Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers Table of Contents LED Machine Lighting - Pg. Automation & Sensing - Pg. 7 Safety - Pg. Switching & Controls - Pg. Index - Pg.

2 Selection Guide Switches & Pilot Lights General Purpose Relays Selection Guide Series RVH Series RJ Series RQ Series RH Series RR Series Appearance Signaling Lights Page Contact Configuration form C (SPDT) SPDT, SPST, DPDT, DPST SPDT, DPDT SPDT, DPDT, PDT, PDT SPDT, DPDT, PDT Terminal Screw Blade or PCB PCB Blade or PCB Pin or Blade Contact Rating (resistive) Contact Material A 0VDC/0VAC Silver-Nickel with gold plating SPDT: A/A, 0V DC/0V AC DPDT: A, 0V DC/0V AC SPDT: A, A DPDT: A 0A, 0V DC/0V AC /HP, 0V AC /HP, 0V AC Silver-Nickel alloy Silver-Nickel alloy Silver-Cadmium Oxide Silver 0A, 0V DC/ 0V AC /HP, 0V AC /HP, 0V AC Series RU Series RY/RM Series RFV Series Appearance Timers Page Contact Configuration DPDT, PDT DPDT, PDT DPDT PDT or PDT Terminal Blade or PCB Blade or PCB Contact Rating (resistive) Contact Material DPDT: 0A, 0V DC/0V AC PDT: A, 0V DC/0V AC /0 HP, 0V AC DPDT Silver Tin Oxide Indium PDT Gold-Silver Alloy on Silver RY: DPDT: A, 0V DC/0V AC PDT: A, 0V DC/0V AC A, 0V DC/0V AC A, 0V AC A 0V DC Gold plated silver Silver Silver alloy Circuit Breakers Terminal Blocks Contactors 7

3 Selection Guide Bifurcated Contacts Relays Series RJ Series RU Series Appearance Page 7 70 Contact Configuration DPDT PDT Terminal Blade or PCB Blade or PCB Contact Rating (resistive) A 0V AC/0V DC A 0V AC/0V DC Contact Material Gold clad Gold Silver Alloy on Silver Latching Relays Series RRKP Series RYKS Series Appearance Page visit Contact Configuration DPDT DPDT Terminal Pin Blade Contact Rating (resistive) 0A, 0V DC 0A, 0V AC A, 0V DC A, 0V AC Contact Material Silver Silver, gold-plated Solid State Relays Series RSC Series RSS Series Appearance Page Output Configuration Form A (SPST-NO) Form A (SPST-NO) Output Rating Output 0A, 0A, A - 00V AC 0A, A, 0A, 7A, 0A - 0V AC Dual SCR (zero crossing) Selection Guide con t Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

4 RVH Switches & Pilot Lights Signaling Lights Key features: Space-saving mm width Only 70mm in height from DIN rail Gold-plated contacts Pre-assembled relay and DIN mount socket Universal screw terminals (flat and Phillips) Universal AC/DC socket with built-in surge suppression and green LED Lever for easy locking and removal of relay Wide input voltage range: to 0V High dielectric strength and impulse withstand voltages Sensitive coil 70mW Reverse Polarity protected 00V AC maximum switching voltage 00VA maximum switching power RoHS compliant RVH Series mm Interface Relays (when using combination of RVH relay and SVH socket) Complete Part Numbers (Relay & Socket) Replacement Parts Part Numbers Accessories Timers Coil voltage Part Number (Standard Stock in bold) Complete Part Number Applicable Socket Part Number Applicable Relay Part Number Item Color Part Number Jumper (0 combs ) Black SVZ-J0B Gray SVZ-J0W Blue SVZ-J0S Spacer (circuit separator) SVZ-SAW Contactors DC V V V V RVH-L-D RVH-L-D RVH-L-D RVH-L-D RVH-L-D SVH-07L- RVH-G-D RVH-L-D SVH-07L- RVH-G-D RVH-L-D SVH-07L- RVH-G-D RVH-L-D SVH-07L- RVH-G-D Marking plate (0 pcs) White SVZ-PW0 V V V V RVH-L-D RVH-L-AD RVH-L-AD RVH-L-AD RVH-L-D SVH-07L- RVH-G-D RVH-L-AD SVH-07L- RVH-G-D RVH-L-AD SVH-07L- RVH-G-D RVH-L-AD SVH-07L- RVH-G-D. Jumper combs come with 0 points, if shorter lengths are needed simply cut off the excess points.. Width of spacer: mm Note: When using a cut jumper, please use a spacer on the cut side. For additional information see instruction sheet. Terminal Blocks AC/DC V 0V 0V - V 0V - 0V RVH-L-AD RVH-L-AD0 RVH-L-AD0 RVH-L-AD0 RVH-L-AD SVH-07L- RVH-G-D RVH-L-AD0 SVH-07L- RVH-G-D0 RVH-L-AD0 SVH-07L- RVH-G-D0 RVH-L-AD0 SVH-07L- RVH-G-D0 Standard stock models in bold. Circuit Breakers 7

5 RVH Number of Poles Contact Configuration Contact material Degree of Protection Dielectric Between contact and coil strength Between pole Vibration Resistance Operating extremes Damage limits Shock Operating extremes Resistance Damage limits Mechanical Life (without load) Operating Temperature Operating Humidity Weight pole *Operation frequency 00 operations per hour. form C (SPDT) AgNi (Au plating) Specifications IP0,000V AC for min,000v AC for min NO: Frequency 0 to Hz, Amplitude.0mm NC: Frequency 0 to Hz, Amplitude 0.mm Frequency 0 to Hz, Amplitude.0mm NO: m/s (G) NC:.m/s (G) 0m/s (0G) Over 0,000,000 operations -0 to +70 C (RVH-L-D, D, D, D, D, AD, AD, AD, AD, AD0) -0 to + C (RVH-L-AD0, AD0) without freezing to % (without condensation) Approx. 0g Contact Ratings Allowable contact power Resistive load 00VA, 0W Rated Load Resistive load 0V AC A, 0V DC A Allowable Switching Current A Allowable Switching Voltage 00VAC, VDC Allowable Switching Power 00VA, 0W Minimum Applicable Load VDC/0mA Coil Ratings Rated Voltage DC AC/DC Rated Current +-% (ma) Circuit AC Resistance +-0% (Ω) Circuit DC Resistance +-0% (Ω) Pickup Voltage Operating Characteristics Dropout Voltage Maximum Allowable voltage Power Consumption V W V. - 0.W V % 0.W V W V W V W 0% max % min V. 0.W V W V 0 0 0% 0.W 0V W 0V - V W 0V - 0V W Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

6 RVH Switches & Pilot Lights RVH-G-* Relay Dimensions (mm) SVH-07L* Socket A+ (Coil) (NO) Signaling Lights A- (Coil) (COM). (NC) Note: Drawings are not to scale.. RVH Contact Ratings Maximum Switching Power AC Maximum Switching Power DC Timers Resistive AC Resistive load Contact Current (A) Inductive Contact Current (A) AC Inductive load (p. f=0.) Contactors Circuit Breakers Terminal Blocks Contact Current (A) DC Resistive load DC Inductive load Contact Voltage (V) Contact Voltage (V) (L/R = ms) Contact Voltage (V) 7

7 RJ RJ Series Slim Power Relays Key features: Compact and rugged power relays. Large switching capacity Compact housing only.7-mm wide. Large contact rating RJ (-pole): A (UL general use AC) RJ (-pole): A Non-polarized LED indicator available on blade type. IDEC s unique light guide structure enables high visibility of coil status from any direction. The smallest width for -pole/bifurcated contact relay Excellent electrical and mechanical life. Electrical life: 00,000 operations (AC load) Mechanical life: 0 million operations (AC coil) RoHS directive compliant (EU directive 00//EC). Contains no lead, cadmium, mercury, hexavalent chromium, PBB or PBDE. Diode model: Diode reverse withstand voltage: 000V UL recognized, CSA certified, EN compliant. UL0 UL File No. E CSA C. No. 0 CSA File No. LR Part Number Selection EN0- VDE (REG.-Nr B) Style Terminal Contact Model Part Number Blade PCB SPDT EN0- EC Low Voltage Directive Coil Voltage Code (Standard Stock in bold) Standard RJS-C-0 A, A0, A0, A0, A0, with LED RJS-CL-0 D, D, D, D00 with Surge Suppresion Diode RJS-CD-0 with LED & Surge Suppresion Diode RJS-CLD-0 D, D, D, D00 Standard RJS-C-0 A, A0, A0, A0, A0, with LED RJS-CL-0 D, D, D, D00 with Surge Suppresion Diode RJS-CD-0 D, D, D, D00 with LED & Surge Suppresion Diode RJS-CLD-0 DPDT Standard Bifurcated contacts (without LED indicator) RJS-C-0 A, A, A0, A0, Bifurated contacts (with LED indicator) RJS-CL-0 D, D, D, D00 Bifurcated contacts diode (without LED indicator) RJS-CD-0 Bifurcated contacts diode (with LED indicator) RJS-CLD-0 D, D, D, D, D00 SPDT Standard RJV-C-0 High Capacity RJV-CH-0 SPST-NO Standard RJV-A-0 A, A0, A0, A0, A0, High Capacity RJV-AH-0 D, D, D, D, D, D00 DPDT Standard RJV-C-0 DPST-NO Standard RJV-A-0 DPDT Bifurcated contacts RJV-C-0 A, A, A0, A0, DPST-NO Bifurcated contacts RJV-A-0 D, D, D, D, D00 Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RJS-C- A0 Part No. Coil Voltage Code Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

8 RJ Timers Signaling Lights Switches & Pilot Lights Coil Voltage Table Coil Voltage Code A A A0 A0 A0 A0 D D D D D D00 Coil Rating V AC V AC 0V AC 0V AC 0V AC 0V AC V DC V DC V DC V DC V DC 00-0V DCV DC Sockets Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount PCB Mount Circuit Breakers Terminal Blocks Contactors Blade Models PCB Models Accessories RJS (Std) SJS-0BW SJS-07LW SJS- RJS (Std)/RJS SJS-0BW SJS-07LW SJS- RJV (Std) SQV-07B* SQV-* RJV (HC) RJV/RJV SQV-07B* SQV-* Shown with optional marking plate. *Hold-down clip or spring must be removed to use with RJ PCB relays. Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) DIN Rail End Stop All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Replacement Hold Down Springs Part Number Used With Socket SJZ-CM SJS-0BW, SJS-07LW, SJS-0BW, SJS-07LW SQZ-C SQV-07B, SQV-07B SQZ-C SQV-, SQV- Jumpers for SJ Sockets Poles Part Number Quantity SJZ-JF Must SJZ-JF purchase in SJZ-JF quantities 0 SJZ-JF0 of 0. The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and.7 (mm) in width (DIN standard). Standard length is (,000mm). Marking Plate Finger safe sockets (ONLY) SJZ-PWPN0 0 pieces per pack 70

9 RJ Specifications Model RJ RJ RJS RJV Number of Poles -pole -pole Contact Configuration SPDT DPDT DPDT bifurcated contacts DPDT (bifurcated), DPST-NO (bifurcated) Contact Material Silver-nickel alloy AgNi (gold clad) Degree of Protection IP0 Flux-tight structure Contact Resistance (initial value) 0 mω maximum Operating Time ms maximum (with diode: 0 ms maximum) Release Time 0 ms maximum (with diode: 0 ms maximum) Dielectric Strength Vibration Resistance Shock Resistance Electrical Life (rated load) Mechanical Life (no load) Operating Temperature Operating Humidity Weight (approx.) Between contact and coil 000V AC, minute Between contacts of the same pole 000V AC, minute Between contacts of different poles 000V AC, minute Operating extremes 0 to Hz, amplitude 0.7 mm Damage limits 0 to Hz, amplitude 0.7 mm Operating extremes NO contact: 00 m/s, NC contact: 00 m/s Damage limits 000 m/s Note: Above values are initial values.. Measured using V DC, A voltage drop method.. Measured at the rated voltage (at 0 C), excluding contact bounce time.. 00% rated voltage. AC load: 00,000 operations minimum (operation frequency 00 operations per hour) DC load: 00,000 operations minimum (operation frequency 00 operations per hour) AC coil: 0,000,000 operations minimum (operation frequency,000 operations per hour) DC coil: 0,000,000 operations minimum (operation frequency,000 operations per hour) g (blade type), 7g (PCB form C type), g (PCB form A type) AC load: 00,000 operations minimum (operation frequency,00 per hour) DC load: 00,000 operations minimum (operation frequency,00 per hour) AC load: 0 million operations minimum (operating frequency,000 operations per hour) DC load: 0 million operations minimum (operating frequency,000 operations per hour) 0 to +70 C (no freezing) to % RH (no condensation) g DPDT: 7g, DPST-NO: g Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

10 RJ Timers Signaling Lights Switches & Pilot Lights Coil Ratings Coil Ratings AC DC Rated Voltage Blade & PCB Models Bifurcated Models Rated Voltage Blade Models PCB Models Bifurcated Models Coil Voltage Code Rated Current (ma) Coil Operating Characteristics ±% (at 0ºC) Resistance Without LED With LED (ohms)±0% Pickup Dropout Maximum 0Hz 0Hz 0Hz 0Hz (at 0ºC) Voltage Voltage Allowable Voltage Power Consumption V A V A ,00 0.VA (0Hz) 0V A ,70 V A % max 0% min 0% Approx. V A VA (0Hz) 0V A ,00 0. to.va 0V A ,70 (0Hz) Coil Voltage Code Rated Current (ma) ±% (at 0ºC) Coil Resistance Without LED With LED (ohms)±0% Pickup (at 0ºC) Voltage Operating Characteristics Dropout Voltage Maximum Allowable Voltage V D..0 7 V D..7,00 70% 70% max 0% min V D.0 0.7,0 00-0V D ,70 0% V D 0 7. V D. 7. V D. 7 70% 70% max 0% min V D.,00 V D.0,0 00-0V D00. -.,70 0% V D V D..0 7 V D..7,00 V D 0.7,0 70% max 0% min 00-0V D ,70 0% Power Consumption 0.W 0.-0.W 70% Approx. 0. to 0.W. LED Indicator is only available on Blade or Bifurcated relays.. Operating characteristics are at 0ºC.. The maximum allowable voltage is the maximum value which can be applied to the relay coils. Contact Ratings Contactors Terminal Blocks Circuit Breakers Contact Ratings Blade Models PCB Models Model pole poles poles (bifurcated contacts) pole poles Standard Type High Capacity Type poles (bifurcated contacts) Allowable Contact Power Rated Load Allowable Allowable Contact Resistive Resistive Inductive Load Switching Switching Inductive Load Voltage Load Load cosø=0. L/R=7ms Current Voltage NO 000V AC 7VA 0V AC A 7.A A AC0V NC 000V AC 7VA 0V AC A 7.A A DC0V NO 000V AC 000VA 0V AC A A A AC0V NC 000V AC 000VA 0V AC A A A DC0V NO 0VA AC 00VA AC 0V AC A 0.A 0V AC A NC 0W DC W DC 0V DC A 0.A V DC NO 000V AC 7VA 0V AC A 7.A A 0W 0W 0V DC A A AC0V NC 000V AC 7VA 0V AC A 7.A DCV A 0W 0W 0V DC A A NO 000V AC 000VA 0V AC A A A 0W 0W 0V DC A A AC0V NC 000V AC 000VA 0V AC A A DCV A 0W 0W 0V DC A A NO 000V AC 000VA 0V AC A A A 0W 0W 0V DC A A AC0V NC 000V AC 000VA 0V AC A A DCV A 0W 0W 0V DC A A NO 0VA AC 00VA AC 0V AC A 0.A 0V AC A NC 0W DC W DC 0V DC A 0.A V DC Minimum Applicable Load DCV 00mA DCV 0mA V DC 00μA DCV 00mA DCV 00mA DCV 0mA V DC 00μA 7

11 RJ Agency Ratings Voltage General Use UL Resistive RJ RJ RJ RJ NO NC NO NC NO NC NO NC 0V AC A A A A A A 0V DC A A A A A A Voltage General Use Resistive Inductive CSA RJ RJ RJ RJ RJ RJ RJ NO NC NO NC NO NC NO NC NO NC NO NC NO NC 0V AC A A A A A A 7.A 7.A A A 0V DC A A A A A A A A A A A A Voltage Resistive VDE AC-, DC-* RJ RJ RJ RJ RJ NO NO NO NC NO NO 0V AC A A A A A A 0V DC A A A A.A A *According to the utilization categories of IEC07-- Socket Specifications DIN Rail/ Panel Mount Finger-safe DIN Rail/Panel Mount PCB Mount Socket Terminal Electrical Rating Wire Size Torque SJS-0BW M screw with captive wire clamp 0V, A Maximum up to - # AWG N m (Maximum.N m) SJS-0BW M screw with captive wire clamp 0V, A Maximum up to - # AWG N m (Maximum.N m) SJS-07LW M screw with captive wire clamp, fingersafe 0V, A Maximum up to - # AWG N m (Maximum.N m) SJS-07LW M screw with captive wire clamp, fingersafe 0V, A Maximum up to - # AWG N m (Maximum.N m) SQV-07B M screw with box clamp, fingersafe 00V, A Maximum up to - # AWG.0N m Maximum SQV-07B M screw with box clamp, fingersafe 00V, 0A Maximum up to - # AWG.0N m Maximum SJS- PCB mount 0V, A SJS- PCB mount 0V, A SQV- PCB mount 00V, A SQV- PCB mount 00V, A Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

12 RJ Switches & Pilot Lights Electrical Life Curve (Resistive Load) ( 0,000 operations) RJ RJ High Capacity RJ V DC Resistive Load (NO Contact) 0V AC Resistive Load (NO contact) ( 0,000 operations) V DC Resistive Load (NO Contact) 0V AC Resistive Load (NO contact) ( 0,000 operations) V DC Resistive Load (NO Contact) 0V AC Resistive Load (NO contact) Signaling Lights Maximum Switching Capacity (Resistive Load) RJ RJ High Capacity RJ 0 AC Resistive (NO Contact) 0 DC Resistive (NC Contact) DC Inductive (NO Contact) AC Resistive DC Resistive (NO Contact) AC Inductive 0 AC Resistive (NO Contact) DC Resistive (NO Contact) DC Inductive (NC Contact) DC Resistive (NO Contact) Load Voltage (V) Load Voltage (V) Load Voltage (V) 0 Circuit Breakers Terminal Blocks Contactors Timers Operating Temperature and Coil Temperature Rise RJ (AC Coil, 0 Hz) RJ (AC Coil, 0 Hz) RJ (DC Coil) Temperature Rise (C) AC Coil (0 Hz) Load Current A pole No Load Current Ambient Temperature (C) Temperature Rise (C) AC Coil (0 Hz) Load Current A pole No Load Current Ambient Temperature (C) RJ (AC Coil, 0 Hz) RJ (AC Coil, 0 Hz) RJ (DC Coil) Temperature Rise (C) DC Coil Load Current A poles No Load Current Ambient Temperature (C) 70 Temperature Rise (C) AC Coil (0 Hz) Load Current A poles No Load Current Ambient Temperature (C) Temperature Rise (C) Temperature Rise (C) DC Coil Load Current A pole No Load Current Ambient Temperature (C) DC Coil Load Current A poles No Load Current Ambient Temperature (C)

13 RJ RJ (AC Coil, 0 Hz) RJ (AC Coil, 0 Hz) RJ (DC Coil) Temperature Rise ( C) AC Coil (0 Hz) Load current A x poles No load current Ambient Temperature ( C) Ambient Temperature ( C) The above temperature rise curves show characteristics when 00% the rated coil voltage is applied. The slanted dashed line indicates allowable temperature rise for the coil at different ambient temperatures. Temperature Rise ( C) AC Coil (0 Hz) Load current A x poles No load current Temperature Rise ( C) DC Coil Load current A x poles No load current Ambient Temperature ( C) Internal Connection (View from Bottom) RJ-C-* Standard RJ-C/RJ-C-* Standard RJV-A-* (A) (A) () () () RJ-CL-* With LED Indicator (A) (A) Coil voltage V AC/DC and below RJ-CD-* With Diode (A) (A) + () () () () () () (A) RJ-CLD-* With LED Indicator and Diode (A) (A) + () () () Coil voltage V DC and below () () () (A) Coil voltage greater than V AC/DC (A) (A) + () () () Coil voltage greater than V DC (A) (A) () 7() () () () () RJ-CL/RJ-CL-* With LED Indicator (A) () () () (A) 7() () () Coil voltage V AC/DC and below RJ-CD-/ RJ-CD-* With Diode (A) (A) + () () () 7() () () (A) (A) (A) 70 () () () () () () () (A) 7() () () Coil voltage greater than V AC/DC RJ-CLD/ RJ-CLD-* With LED Indicator and Diode (A) (A) + () () () 7() () () Coil voltage V DC and below (A) (A) + () 7() () () Coil voltage greater than V DC () () Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

14 RJ Switches & Pilot Lights Blade Relay (mm) RJS Dimensions (mm) RJS/RJS Signaling Lights ø. hole ø. hole All dimensions in mm. PCB Relay (mm) RJV-C-* RJV-A-* Timers. max. (.) max. (.) max. (.7).0 -ø. holes.. (.) 7. (.) 0.0. max. (.) max. (.) 0. max. (.7).0 (.) -ø. holes (.) Contactors RJV-CH-*/RJV-C-*. max. (.) 0. (.) -ø. holes max. (.) 0. RJV-AH-*/RJV-A-*. max. (.) 0. (.) -ø. holes 7. Terminal Blocks.0 0. RJV-C-* max. (.) max. (.7).0 (.) max. (.) max. (.) RJV-A-* 0. max. (.7).0 max. (.7).0 (.) max. (.) Circuit Breakers. max. (.) max. (.) 0. max. (.7) max. (.) 0. max. (.7). 7

15 RJ Standard DIN Rail Mount Sockets SJS-0BW.. 7 (A) (A) () (TOP VIEW) Finger-safe DIN Rail Mount Sockets SJS-07LW SQV-07B..7. (A) (A) A A 7 () () (TOP VIEW) M Terminal Screws.7 M Teminal Screws. () () (TOP VIEW) ø. () ø Dimensions con t (mm) SJS-0BW SJS-07LW SQV-07B. M Terminal Screws (A) (A) () () 7 () () () () (A) (A) (TOP VIEW). 7 A A (TOP VIEW) () (TOP VIEW) M Terminal Screws. ø. 7 ().. () () () ().7 ø Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

16 RJ Switches & Pilot Lights PC Mount Sockets SJS-.0. (.7) ± ±0. ±0. ±0...0 ± ±0. -ø. holes Dimensions con t (mm) (Bottom View) SJS-.0. (.) 7. ± Circuit Breakers Terminal Blocks Contactors Timers Signaling Lights.0..0 ±0..0 ±0. ± ø. holes (Bottom View) SQV- SQV- 7

17 RQ RQ Series PCB Relays IDEC RQ relays are low-profile, PCB relays in a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger power needs, a A model is also available. Key features: Low profile: x.7 x mm Contact rating: A (DPDT) and A (SPDT) High capacity model with A (SPDT) contact rating Operational life: 00K cycles at full resistive load 0 million cycles, no load LED/Diode Plug-in modules available with DIN rail socket UL Recognized File No. E0 R Part Number Selection Part Number Contact Model Pin Terminal Coil Voltage Code SPDT A SPDT A DPDT A Basic RQV-CM-0 A, A, A0, D, D HIgh Capacity (HC) RQV-CH-0 A, A, A0, D, D, D0 Basic RQV-CN-0 A, A, A0, D, D, D0 Coil Voltage Table Coil Voltage Code A A A0 D D D0 Coil Rating V AC 0-0V AC 0-0V AC V DC V DC 0V DC Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RQV-CM A Part No. Coil Voltage Code Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

18 RQ Switches & Pilot Lights Sockets Relays Finger-safe DIN Rail Mount PCB Mount RQ SQV-07B SQV-* RQ RQ HC SQV-07B SQV-* Replacement Parts & Accessories Part Number Description Part Number Description SQZ-C Replacement retaining clip SQZ-LD Diode plug in modules for DIN socket SQZ-C Replacement hold-down spring for SQ PCB sockets SQZ-LR RC plug-in module (0-0V AC) for DIN socket SQZ-J pt jumper for DIN socket SQZ-P Replacement marking plate Signaling Lights. *Comes with hold down spring. Comes with retaining clip and marking plate. Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) DIN Rail End Stop All DIN rail sockets BNDN000 DIN rail BNL. mm wide. IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and.7 (mm) in width (DIN standard). Standard length is (,000mm). Timers Contactors Terminal Blocks Specifications Model (Contact) RQ RQ HC RQ No. of poles Contact Configuration SPDT SPDT DPDT Contact Rating A A A Contact Material Silver-Nickel alloy Contact Resistance Operating Time Release Time Dielectric Strength Vibration Resistance Shock Resistance Mechanical Life Electrical Full Rated Load Operating Temperature Operating Humidity Between contact & coil Between contacts Damage limits Operating extremes Damage limits Operating extremes 00mΩ max ms ms,000vac, minute,000vac, minute 0- Hz, amplitude.mm 0- Hz, amplitude.mm 00m/s min (0G),000m/s min (00G) 0,000,000 operations 00,000 operations -0 to º C to % RH Dimensions (H x W x D mm) x.7 x Weight (Approx.) g Circuit Breakers 770

19 RQ Coil Ratings Rated Voltage DC AC Nominal Current Coil Power Consumption 0HZ 0HZ Resistance 0HZ 0HZ V.mA 0Ω V.7mA,0Ω 0V.mA,0Ω V.7mA.mA 0Ω 0.7W 0.W V 7.mA.mA,00Ω 0.W 0.7W 0V.mA.7mA,00Ω 0.7W 0.W Pickup Voltage Dropout Voltage Max Allowable Voltage 0.0W 0% Max % Min 0% 0% Max 0% Min 0% Socket Specifications Relays Terminal Electrical Rating Wire Size Torque DIN Rail Sockets SQV-07B M screw with box clamp 00V, A Maximum up to - # AWG.0N m Maximum SQV-07B M screw with box clamp 00V, A Maximum up to - # AWG.0N m Maximum PCB Mount Socket SQV- PCB mount 00V, A SQV- PCB mount 00V, A Electrical Life Curves Maximum Switching Capacity RQ & RQ High Capacity RQ RQ, RQ High Capacity & RQ Operations RQ 0 Internal Connection (View from Bottom) RQ-HC Operations RQ RQ RQ HC NC C NO NC NC C C NO NO NC C NO (V) load of Voltage RQ RQ RQ-HC Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

20 RQ Switches & Pilot Lights RQ Dimensions (mm) RQ/RQ HC Signaling Lights SQ Socket Domensions SQV-07B SQV-07B Circuit Breakers Contactors Terminal Blocks Timers A A A A (TOP VIEW) (TOP VIEW) SQV- PCB Pin Layout SQV- SQV- PCB Pin Layout SQV- 77

21 RH Key features SPDT through PDT, 0A contacts Compact power type relays Miniature power relays with a large capacity 0A contact capacity Compact size saves space Contact SPDT DPDT PDT PDT RH Series Compact Power Relays Model Part Number Selection Blade Terminal Part Number PCB Terminal Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 Coil Voltage Code (Standard Stock in bold) ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V With Diode (DC coil only) RHB-UD 0 RHV-UD 0 DCV, DCV, DCV, DCV, DC0V With Indicator and Diode (DC coil only) RHB-ULD 0 DCV, DCV, DCV, DC0V Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 RHV-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V With Diode (DC coil only) RHB-UD 0 RHV-UD 0 DCV, DCV, DCV, DCV, DC00-0V With Indicator and Diode (DC coil only) RHB-ULD 0 RHV-ULD 0 Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 RHV-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 With Diode (DC coil only) RHB-UD 0 With Indicator and Diode (DC coil only) RHB-ULD 0 Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 RHV-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V DCV, DCV, DCV, DCV, DC0V ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V With Diode (DC coil only) RHB-UD 0 RHV-UD 0 DCV, DCV, DCV, DCV, DC0V With Indicator and Diode (DC coil only) RHB-ULD 0 PCB terminal relays are designed to mount directly to a circuit board without any socket. Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RHB-U AC0V Part No. Coil Voltage Code Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

22 RH Switches & Pilot Lights Signaling Lights Sockets (for Blade Terminal Models) Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount Through Panel Mount PCB Mount RHB SHB-0 SHB-OC SHB- SHB- RHB SHB-0 SHB-0C SHB- SHB- RHB SHB-0 SHB-0C SHB- SHB- RHB SHB-0 SHB-0C SHB- SHB- Hold Down Springs & Clips Appearance Item Relay Pullover Wire Spring For DIN Mount Socket RHB SYS-0F RHB SYS-0F RHB SHB-0F RHB SHB-0F For Through Panel & PCB Mount Socket SYS-F Leaf Spring (side latch) RHB, RHB, RHB, RHB SFA-0 SFA-0. DIN Rail mount socket comes with two horseshoe clips. Do not use unless you plan to insert pullover wire spring. Replacement horseshoe clip part number is Y Must use horseshoe clip when mounting in DIN mount socket. Replacement horseshoe clip part number is Y Two required per relay. Leaf Spring (top latch) RHB, RHB, RHB, RHB SFA-0 SFA-0 Timers Contactors AC Coil Ratings Voltage (V) Rated Current (ma) ±% at 0 C AC 0Hz AC 0Hz Coil Resistance (Ω) ±0% at 0 C SPDT DPDT PDT PDT SPDT DPDT PDT PDT SPDT DPDT PDT PDT ,00, ,00 7, ,00 7, , ,00,0 Operation Characteristics (against rated values at 0ºC) Max. Continuous Applied Voltage 0% Pickup Voltage 0% maximum Dropout Voltage 0% minimum Terminal Blocks DC Coil Ratings Voltage (V) Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±0% at 0 C SPDT DPDT PDT PDT SPDT DPDT PDT PDT Max. Continuous Applied Voltage Operation Characteristics (against rated values at 0ºC) Pickup Voltage Dropout Voltage Circuit Breakers ,0,00,00, ,0 0.,00,00 7,0 0% 0% maximum 0% minimum Standard coil voltages are in BOLD. 77

23 RH Contact Ratings Model Continuous Current Maximum Contact Capacity Allowable Contact Power Resistive Load Inductive Load Voltage (V) Rated Load Res. Load Ind. Load 0 AC 0A 7A SPDT 0A 0VA 0VA 00W 0W 0 AC 7A.A 0 DC 0A 7A 0 AC 0A 7.A DPDT 0VA 00VA PDT 0A 0 AC 7.A A 00W W PDT 0 DC 0A 7.A Note: Inductive load for the rated load cos ø = 0., L/R = 7 ms TÜV Ratings Voltage RH RH RH RH 0V AC 0A 0A 7.A 7.A 0V DC 0A 0A 0A 0A AC: cos ø =.0, DC: L/R = 0 ms UL Ratings Voltage RH RH Resistive General Use Horsepower Rating RH RH RH RH RH RH RH RH 0V AC 0A 7.A 7.A 7A.A A / HP / HP 0V AC 0A 0A 7.A 7.A / HP / HP 0V DC 0A 0A 7A V DC 0A CSA Ratings Horsepower Voltage Resistive General Use Rating RH RH RH RH RH RH RH RH RH,, 0V AC 0A 0A 7.A 7A 7A 7A A / HP 0V AC 0A 0A 0A 0A 7.A 7.A 7.A / HP 0V DC 0A 0A 0A 0A 7A 7.A Socket Specifications Sockets Terminal Electrical Rating Wire Size Torque DIN Rail Mount Sockets Finger-safe DIN Rail Mount Through Panel Mount Socket PCB Mount Socket SHB-0 SHB-0 SHB-0 SHB-0 SHB-0C (Coil) M screws (contact) M. screws with captive wire clamp 0V, 0A Maximum up to #AWG RH. - in lbs -. in lbs M. screws with captive wire clamp 00V, 0A Maximum up to #AWG -. in lbs (coil) M screws (contact) M. screws with captive wire clamp, fingersafe 0V, 0A Maximum up to #AWG. - in lbs -. in lbs SHB-0C SHB-0C SHB-0C M. screws with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG -. in lbs SHB- SHB- SHB- Solder 00V, 0A SHB- SHB- PCB mount 0V, 0A SHB- SHB- PCB mount 00V, 0A SHB- Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) DIN Rail End Stop Replacement Hold-Down Spring Anchor All DIN rail sockets BNDN000 DIN rail BNL. mm wide. DIN mount sockets and hold down springs. Y77-0 RH The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and.7 (mm) in width (DIN standard). Standard length is (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

24 RH Terminal Blocks Contactors Timers Signaling Lights Switches & Pilot Lights Specifications Contact Material Silver cadmium oxide Contact Resistance 0mΩ maximum Minimum Applicable Load V DC, 0 ma; V DC, 00 ma (reference value) SPDT DPDT 0ms maximum Operating Time PDT PDT ms maximum SPDT DPDT 0ms maximum Release Time PDT PDT ms maximum SPDT AC:.VA (0Hz), VA (0Hz) DC: 0.W Power Consumption DPDT AC:.VA (0Hz),.VA (0Hz) DC: 0.W (approx.) PDT AC: VA (0Hz),.7VA (0Hz) DC:.W PDT AC:.VA (0Hz), VA (0Hz) DC:.W Insulation Resistance 00MΩ minimum (00V DC megger) Between live and dead parts:,000v AC, minute SPDT Between contact and coil:,000v AC, minute Between contacts of the same pole:,000v AC, minute Dielectric Strength Between live and dead parts:,000v AC, minute DPDT Between contact and coil:,000v AC, minute PDT Between contacts of different poles:,000v AC, minute PDT Between contacts of the same pole:,000v AC, minute Operating Frequency Electrical:,00 operations/hour maximum Mechanical:,000 operations/hour maximum Vibration Resistance Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Damage limits:,000m/s (00G) Shock Resistance Operating extremes: 00m/s (0G - SPDT, DPDT) 00m/s (0G - PDT, PDT) Mechanical Life 0,000,000 operations minimum DPDT 00,000 operations minimum (0V AC, 0A) Electrical Life SPDT PDT 00,000 operations minimum (0V AC, 0A) PDT SPDT to +0 C (no freezing) Operating Temperature Operating Humidity Weight (approx.) DPDT PDT PDT to +0 C (no freezing) to % RH (no condensation) SPDT: g, DPDT: 7g, PDT: 0g, PDT: 7g Note: Above values are initial values.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing Release time of relays with diode: 0 ms maximum. Relays with indicator or diode: 000V AC, minute. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. The operating temperature range of relays with indicator or diode is to +0 C. Circuit Breakers 77

25 RH Electrical Life Curves AC Load (RH) Life ( 0,000 operations) (RH) 000 Life ( 0,000 operations) (RH/RH) 000 Life ( 0,000 operations) V AC resistive 0V AC inductive 0V AC inductive 0V AC resistive 7 0 0V AC resistive 0V AC inductive 7 0 0V AC resistive 0V AC inductive Maximum Switching Capacity (RH) Characteristics (Reference Data) 0V AC resistive 0V AC inductive DC inductive AC resistive AC inductive 0V AC resistive 0V AC inductive DC resistive Load Voltage (V) DC Load (RH) Life ( 0,000 operations) (RH) 000 Life ( 0,000 operations) (RH/RH) 000 Life ( 0,000 operations) V DC resistive 0V DC inductive 00V DC inductive (RH/RH/RH) V DC resistive V DC resistive 00V DC inductive 0V DC resistive 0V DC inductive 7 0 0V DC resistive 00V DC resistive 00V DC inductive 0. 0V DC inductive 7 0 DC inductive AC resistive AC inductive DC resistive Load Voltage (V) Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 777

26 RH Switches & Pilot Lights Signaling Lights Continuous Load Current vs. Operating Temperature Curve (Basic Type, With Check Button, and Top Bracket Mounting Type) (RH) Operating Temperature ( C) Note: The rated voltage is applied to the coil. AC Coil DC Coil 7 0 (RH) Operating Temperature ( C) 00 Timers Contactors Terminal Blocks Circuit Breakers Note: The rated voltage is applied to the coil. DC Coil AC Coil 7 0 (RH/RH) Operating Temperature ( C) Note: The rated voltage is applied to the coil. AC/DC Coil 7 0 Internal Connection (View from Bottom) Basic Type SPDT DPDT PDT PDT With Check Button 0 7 ( ) ( + ) Front Pushbutton Contacts can be operated by pressing the check button. With Indicator (-L type) SPDT PDT PDT DPDT Below 00V AC/DC 00V AC/DC and over ( ) ( + ) ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) 0 7 ( ) ( + ) 7 0 ( ) ( + ) Below V AC/ DC V AC/ DC and over ( ) ( + ) ( ) ( + ) When the relay is energized, the indicator goes on. Relay coils less than 00V DC do not contain a protection diode (except DPDT). Relay coils below 00V use LED indicator, coils above 00V use neon lamp indicator. LED color of DPDT model is green With Diode (-D type) SPDT DPDT PDT PDT ( ) ( + ) ( ) ( + ) ( ) ( + ) ( ) ( + ) Contains a diode to absorb the back emf generated when the coil is de-energized. The release time is slightly longer. Available for DC coil only. Diode Characteristics Reverse withstand voltage:,000v Forward current: A 77

27 RH With Indicator LED & Diode (-LD type) Below 00V DC 00V DC and over SPDT PDT PDT DPDT ( ) ( + ) ( ) ( + ) Dimensions (mm) Below V AC/ DC V AC/ DC and over ( ) ( + ) ( ) ( + ) Contains an LED indicator and a surge absorber, and has the same height as the basic type. LED color of DPDT model is green. RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-U/RHB-UL/RHB-UD/RHB-ULD Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. Dimensions in the ( ) include a hold-down spring.. max. ø. hole Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. Dimensions in the ( ) include a hold-down spring.. max. ø. hole RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-UT RHB-UT RHB-UT. Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max.. max. ø. hole Dimensions in the ( ) include a hold-down spring ø. hole.7... max ø. hole max.. RHB-UT ø. hole max.. max Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. Dimensions in the ( ) include a hold-down spring.. max.. ø. hole ø. hole max Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

28 RH Switches & Pilot Lights RHV-U/RHV-UD Dimensions con t (mm) RHV-U/RHV-UL/RHV-UD Signaling Lights. max... Circuit Breakers 7. -ø holes ø. holes ø. holes RHV-U/RHV-UL/RHV-D -ø. holes 0 0. max.. RHV-U/RHV-UL/RHV-UD max max.. -ø. holes Standard DIN Rail Mount Sockets SHB-0 SHB-0 Timers 7 7. M. Terminal Screw 7. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) 7. M. Terminal Screw 7. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes). 0 M Terminal Screw. Contactors Terminal Blocks. max. 7. max.. min.. min. max. ø. min.. max. (Top View) ø. min max.. min. 7. max. ø. min. (Top View) (For terminals,, and ) (For terminals and ) SHB-0. M. Terminal Screw. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) SHB-0. M. Terminal Screw. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) max.. min. 7. max. ø. min. 0 (Top View). 0.. max.. min. 7. max. ø. min. 0 (Top View) 70

29 RH Finger-safe DIN Rail Mount Sockets SHB-0C M. Terminal Screw ø. SHB-0C.7 M Terminal Screw 7 0 M. Terminal Screw ø Through Panel Mount Socket SHB- SHB- DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. Dimensions con t (mm) (Top View) 0 (Top View) SHB-0C SHB-0C.7 SHB- SHB- 0 M. Terminal Screw ø. 7 ø..7. When using BAA/BAP:.7. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. DIN Rail (BAA/BAP) -ø. Mounting Holes (or M Tapped Holes) Ring type crimping terminals cannot be used. 7 (Top View) 0 (Top View) Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

30 RH Switches & Pilot Lights Signaling Lights PCB Mount Sockets SHB-. SHB (Bottom View) -ø. holes.7.. min.* * min. when using hold-down springs. Dimensions con t (mm) SHB-. min.. -ø holes (Tolerance ±0.). SHB- 0.. Circuit Breakers Terminal Blocks Contactors Timers (Bottom View).7... min.*. * min. when using hold-down springs. 0. min. -ø. holes (Tolerance 0.) (Bottom View).7.. min.* * min. when using hold-down springs 7.. min ø. holes (Tolerance 0.) (Bottom View) * min. when using hold-down springs. min.*..7.. min ø. holes (Tolerance 0.) 7

31 RR RR Series Power Relays Key features: SPDT through PDT, 0A contacts Midget power type relays Available in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. DIN rail, surface and panel mount sockets are available for a wide a variety of mounting applications. Part Number Selection Part Number Contact Model Pin Terminal Blade Terminal* SPDT Standard RRBA-U 0 With Indicator RRBA-UL 0 With Check Button RRBA-UC 0 With Indicator and Check Button RRBA-ULC 0 Side Flange Model RRBA-US 0 DPDT Standard RRP-U 0 RRBA-U 0 With Indicator RRP-UL 0 RRBA-UL 0 With Check Button RRP-UC 0 RRBA-UC 0 With Indicator and Check Button RRP-ULC 0 RRBA-ULC 0 Side Flange Model RRBA-US 0 PDT Standard RRPA-U 0 RRB-U 0 With Indicator RRPA-UL 0 RRB-UL 0 With Check Button RRPA-UC 0 RRB-UC 0 With Indicator and Check Button RRPA-ULC 0 RRB-ULC 0 Side Flange Model RRB-US 0 *Blade type not TUV tested or CE marked. Side flange model mounts directly to panel with no socket required. Sockets Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount Through Panel Mount RRP RRPA RRBA RRBA RRB SRP-0 SRP-0 SRP-0 SRP-0 SRP-0C SRP-0C SRP- SRP- SRB-0 SRB- Coil Voltage Code (Standard Stock Items in Bold) ACV, ACV, ACV, AC0V, AC0V, AC0V, DCV, DCV, DCV, DCV, DC0V Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RRB-U AC0V Part No. Coil Voltage Code All DIN rail mount sockets shown above can be mounted using DIN rail BNDN000. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

32 RR Switches & Pilot Lights Hold Down Springs & Clips Appearance Description Relay Pullover Wire Spring RRP RRPA RRBA, RRBA, RRB For DIN Mount Socket SRB-0F SRB-0F SRB-0F For Through Panel & PCB Mount Socket SRP-0F SRB-0F Signaling Lights Leaf Spring (side latch) RRP, RRPA SFA-0 Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) All DIN rail sockets BNDN000 The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and.7 (mm) in width (DIN standard). Standard length is (,000mm). DIN Rail End Stop Replacement Hold-Down Spring Anchor DIN rail BNL. mm wide. Horseshoe clip for sockets SRB-0, SRP-0, SRP-0 Chair clip for sockets SRP-0(C), SRP-0(C) Y77-0 Y70-0 For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. Circuit Breakers Terminal Blocks Contactors Timers 7

33 RR Specifications Contact Material Silver Contact Resistance 0 mω maximum Minimum Applicable Load V DC, 0 ma Operating Time ms maximum Release Time ms maximum Power Consumption (approx.) AC: VA (0 Hz),. VA (0 Hz) DC:.W Insulation Resistance 00 MΩ minimum (00V DC megger) Between live and dead parts: 00V AC, minute Pin Terminal Between contact and coil: 00V AC, minute Between contacts of different poles: 00V AC, minute Dielectric Between contacts of the same pole: 000V AC, minute Strength Between live and dead parts: 000V AC, minute Blade Terminal Between contact and coil: 000V AC, minute Between contacts of different poles: 000V AC, minute Between contacts of the same pole: 000V AC, minute Operating Frequency Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Vibration Resistance Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Shock Resistance Damage limits: 000 m/s (00g) Operating extremes: 00 m/s (0G) Mechanical Life 0,000,000 operations Electrical Life 00,000 operations (0V AC, A) Operating Temperature to +0 C (no freezing) Operating Humidity to % RH (no condensation) Weight (approx.) (Standard type) RRP: 0g, RRPA: g, RRBA/RRBA/RRB: g Coil Ratings Rated Voltage (V) AC (0/0 Hz) DC Rated Current (ma) ±% (at 0 C) 0 Hz 0 Hz Coil Resistance (Ω) ±0% (at 0 C) ,0 0 0., , ,00 0,0. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. Operating Characteristics (values at 0 C) Maximum Continuous Pickup Voltage Dropout Voltage Applied Voltage 0% 0% maximum 0% minimum 0% 0% maximum 0% minimum Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

34 RR Switches & Pilot Lights Signaling Lights Contact Ratings Continuous Current 0A Maximum Contact Capacity Allowable Contact Power Resistive Load 0VA AC 00W DC Inductive Load 00VA AC 0W DC Note: Inductive load for the rated load cos ø = 0., L/R = 7 ms TÜV Ratings Voltage 0V AC 0V DC 0A 0A Rated Load Voltage (V) Res. Load Ind. Load 0 AC 0A 7.A 0 AC 7.A A 0 DC 0A A AC: cos ø =.0, DC: L/R = 0 ms UL Ratings Voltage Resistive General use Horse Power Rating 0V AC 0A 7A / HP 0V AC 0A 7.A / HP 0V DC 0A 7A CSA Ratings Voltage Resistive General use 0V AC 0A 7A 0V AC 0A 7.A 00V DC 0.A 0V DC 0A 7.A Timers Socket Specifications Relays Terminal Electrical Rating Wire Size Torque SRP-0 M screw with captive wire clamp 00V, 0A Maximum - # AWG -.in lbs SRP-0C M screw with captive wire clamp, fingersafe 00V, 0A Maximum - # AWG -.in lbs SRP-0 M screw with captive wire clamp 00V, 0A Maximum - # AWG -.in lbs DIN Rail Sockets SRP-0 M screw with captive wire clamp 00V, 0A Maximum - # AWG -.in lbs SRP-0C M screw with captive wire clamp, fingersafe 00V, 0A Maximum - # AWG -.in lbs SRP-0 M screw with captive wire clamp 00V, 0A Maximum - # AWG -.in lbs SRB-0 M screw with captive wire clamp 00V, A (0A)* (*CSA rating) Maximum - # AWG -.in lbs Through SRP- Solder 00V, 0A Panel Mount SRP- Solder 00V, 0A Sockets SRB- Solder 00V, 0A Circuit Breakers Terminal Blocks Contactors 7

35 RR Electrical Life Curves AC Load Life ( 0,000 operations) V AC resistive 0 0V AC resistive 0V AC inductive 0 0V AC inductive Maximum Switching Capacity DC resistive DC inductive AC resistive AC inductive Load Voltage (V) Characteristics (Reference Data) DC Load Life ( 0,000 operations) V DC resistive 00V DC inductive 0 0V DC resistive 0V DC inductive Continuous Load Current vs. Operating Temperature Curve (Standard Type, With Check Button, and Side Flange Type) AC Coil DC Coil 7 0 Internal Connection (View from Bottom) Standard Type RRP-U RRPA-U RRBA-U RRBA-U RRB-U With Check Button With Indicator (-UL type) RRP RRPA RRBA RRBA RRB Coil Below 00V AC/DC Coil 00V AC/DC and over Operating Temperature (C) Front Pushbutton Contacts can be operated by pressing the check button. When the relay is energized, the indicator goes on. An LED protection diode is not contained in relay coils below 00V DC. Coils below 00V use LED indicator while coils above 00V use neon lamp indicator. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

36 RR Switches & Pilot Lights RRP-U/RRP-UL Total length from panel surface including relay socket SRP-0:. (7.) max., SRP-: () max. Dimensions (mm) RRPA-U/RRPA-UL Total length from panel surface including relay socket SRP-0:. (7.) max., SRP-: () max Signaling Lights. max. RRBA-U/RRBA-UL/RRBA-U RRBA-UL/RRB-U/RRB-UL.. Dimensions in the ( ) include a hold-down spring. RRBA-US/RRBA-US/RRB-US. max... Dimensions in the ( ) include a hold-down spring ø.0 oblong hole -ø. Mounting Holes.0 ø.0 oblong hole Total length from panel surface including relay socket SRB-0: 7 (7) max., SRB-: (0) max max A B 7 7. max. 7. Dimensions in the ( ) include a hold-down spring. A B Circuit Breakers Timers Standard DIN Rail Mount Sockets SRP-0 SRP-0 Contactors M. Terminal Screw ø ø. hole. 0. DIN Rail (BNDN) 7. max. -ø. Mounting Holes (or M Tapped Holes). max. min. ø. min. 7 (Top View) 0 0 M. Terminal Screw Terminal Blocks ø. hole ø. DIN Rail (BNDN) 7. max. -ø. Mounting Holes (or M Tapped Holes). max. min. ø. min. 7 (Top View) SRP-0 SRP-0 M. Terminal Screw ø. hole ø7. 0. DIN Rail (BNDN) 7. max. -ø. Mounting Hole (or M Tapped Holes). max. min. ø. min. 7 0 (Top View) 0 M. Terminal Screw ø. hole ø7. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes). max. min. 7. max. ø. min. 7 0 (Top View) 7

37 RR Standard DIN Rail Mount Sockets SRB M. Terminal Screw.. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes). Finger-safe DIN Rail Mount Sockets SRP-0C. 7 ø ø. hole.. 0 Through Panel Mount Socket SRP- 0. SRB ø Panel Surfarface 7. max. 0.. DIN Rail (BNDN) 7. max. 7. max.. min. ø. min. B A 7 (Top View) -ø. Mounting Holes (or M Tapped Holes) Ring type crimping terminals cannot be used. 7 (Bottom View) 7 A B (Bottom View).7. min. ø0.* 7 (Top View) -ø. Mounting Holes (or M Tapped Holes). *When two or more sockets are mounted side by side: L = (N ) +. N: No. of sockets mounted -ø. Mounting Holes (M Tapped Holes) (Tolerance 0.) SRP-0C. SRP ø ø. hole ø Panel Surfarface DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring type crimping terminals cannot be used. 7 0 (Bottom View) ø0 7 0 (Top View) -ø. Mounting Holes (or M Tapped Holes) Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

38 RU Switches & Pilot Lights Signaling Lights RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator No internal wires, lead-free construction Cadmium-free contacts Mechanical flag indicator Manual latching lever with color coding for AC or DC coil Snap-on yellow marking plate; optional marking plates are available in four other colors Maximum contact ratings: 0A (RU), A (RU), A (RU) UL Recognized, CSA Certified, EN Compliant Timers With Latching or Momentary Lever Mechanical Indicator* The contact position can be confirmed through the five small windows. Marking Plate Standard yellow marking plate is easily replaced with optional marking plates in four colors for easy identification of relays. LED Indicator* Non-polarized green LED indicator is standard provision for plug-in terminal, latching lever types EN0- Latching and Momentary Lever Using the lever, operation can be checked without energizing the coil. The lever is color coded for AC and DC coils. Latching Momentary AC coil: Orange Red DC coil: Green Blue In Normal Operation Contactors Standard (without lever) Note: Turn off the power to the relay coil when using the latching lever. After checking the operation, return the latching lever in the normal position. Terminal Blocks Mechanical Indicator* Marking Plate LED Indicator* Non-polarized green LED indicator is standard provision for plug-in terminal types. AC/DC Color Marking For identification of AC or DC coils. AC coil: Yellow DC coil: Blue Coil Voltage Tape Color V AC White 00 to 0V AC Clear 0 to 0V AC Blue 00 to 0V AC Black 0 to 0V AC Red Circuit Breakers *Not available on PCB type. AC Coil DC Coil V DC V DC V DC V DC 0V DC Green Voltage marking on yellow tape 70

39 RU Part Number Selection Part Number Contact Model Standard With Latching Lever With Momentary Lever DPDT (0A) Standard RUS-C-0 RUS-0 RUS-M-0 PDT (A) PDT Bifurcated (A) With RC (AC coil only) RUS-CR-0 RUS-R-0 RUS-MR-0 A0, A0 Coil Voltage Code (Standard Stock in bold) A, A0, A0 D, D, D, D, D0 With diode (DC coil only) RUS-CD-0 RUS-D-0 RUS-MD-0 D, D, D, D, D0 PCB RUV-NF-0 Standard RUS-C-0 RUS-0 RUS-M-0 With RC (AC coil only) RUS-CR-0 RUS-R-0 RUS-MR-0 A0, A0 A, A0, A0 D, D, D, D, D0 A, A0, A0 D, D, D, D, D0 With diode (DC coil only) RUS-CD-0 RUS-D-0 RUS-MD-0 D, D, D, D, D0 PCB RUV-NF-0 Standard RUS-C-0 RUS-0 RUS-M-0 With RC (AC coil only) RUS-CR-0 RUS-R-0 RUS-MR-0 A0, A0 A, A0, A0 D, D, D, D, D0 A, A0, A0 D, D, D, D, D0 With diode (DC coil only) RUS-CD-0 RUS-D-0 RUS-MD-0 D, D, D, D, D0 PCB RUV-NF-0 A, A0, A0 D, D, D, D, D0. Plug-in terminal models have an LED indicator and a mechanical indicator as standard.. PCB models do not have an LED indicator or a mechanical indicator. Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RUS-C A0 Coil Voltage Table Coil Voltage Code A A0 A0 D D D D D0 Coil Rating V AC 0-0V AC 0-0V AC V DC V DC V DC V DC 0V DC Sockets Relays Spring Clamp DIN Rail Mount Standard DIN Rail Mount Finger-safe DIN Rail Mount RUS (DPDT) SUS-L SMS-0 SMS-0C RUS (PDT) RUS (PDT) SUS-L SYS-0 SYS-0C Panel Mount SYS- PCB Mount SMS- SMS- SYS- SYS- Part No. Coil Voltage Code Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

40 RU Switches & Pilot Lights Hold Down Springs & Clips Appearance Item Relay Pullover Wire Spring RUS/RUS/ RUS For DIN Mount Socket SYS-0F For Through Panel & PCB Mount Socket SYS-F Signaling Lights Leaf Spring (side latch) Leaf Spring (top latch) RUS/RUS/ RUS RUS/RUS/ RUS SFA-0* SFA-0* SFA-0* SFA-0* Note: Order pieces for each relay Circuit Breakers Terminal Blocks Contactors Timers Accessories Name Part Number Color Code * Marking Plate RUZ-P* A (orange), G (green), S (blue), W (white), Y (yellow) Specify a color code when ordering. The marking plate can be removed from the relay by inserting a flat screwdriver under the marking plate. Specifications Model (Contact) RU (DPDT) RU (PDT) RU (PDT-bifurcated) Contact Material Silver alloy Silver (gold clad) Silver-nickel (gold clad) Contact Resistance 0 mω maximum Minimum Applicable Load Operating Time Release Time V DC, ma (reference value) V DC, ma V DC, 0. ma 0 ms maximum 0 ms maximum Power Consumption AC:. to.va (0 Hz), 0. to.va (0 Hz) DC: 0. to.0w Insulation Resistance 00MΩ minimum (00V DC megger) Between contact and coil: 00V AC, minute Between contacts of different poles: Dielectric Strength 00V AC, minute 000V AC, minute Between contacts of the same pole: 000V AC, minute Operating Frequency Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Vibration Resistance Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Shock Resistance Damage limits: 000 m/s (00G) Operating extremes: 0 m/s (G) Mechanical Life AC: 0,000,000 operations DC: 00,000,000 operations 0,000,000 operations Electrical Life See table on page 7 Operating Temperature Operating Humidity Weight PCB model: to +70 C (no freezing) Blade model: to +0 C (no freezing) to % RH (no condensation) Approx. g. Measured using V DC, A voltage drop method. Measured at operating frequency of 0 operations/min (failure rate level P, reference value). Measured at the rated voltage (at 0 C), excluding contact bouncing; Release time of AC relays with RC: ms maximum Release time of DC relays with diode: 0 ms maximum. Contact Load and Electrical Life (at ambient temperature 0 C). Measured at the rated voltage. 7

41 RU Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) DIN Rail End Stop Replacement Hold-Down Spring Anchor Coil Ratings Rated Voltage (V) AC (0/0 Hz) DC Coil Voltage Code All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Horseshoe clip for DIN rail sockets Rated Current (ma) ±% (at 0 C) Coil Resistance (Ω) ±0% (at 0 C) 0 Hz 0 Hz A A ,0 0-0 A ,0 D 0 D 0 0 D.7 0 D,0 0 D0.,00. The rated current includes the current of the LED indicator. Surge Suppressor Ratings Model AC Coil With RC DC Coil Contact Ratings Contact DPDT PDT PDT bifurcated Continuous Current 0A A A With Diode Ratings RC series circuit R: 0 kω, C: 0.0 µf Diode reverse voltage: 000V Diode forward current: A Y77-0 Maximum Contact Capacity Allowable Contact Power Voltage Rated Load Resistive Load Inductive Load (V) Res. Load Ind. Load 00VA AC 0VA AC 0 AC 0A A 00W DC 0W DC 0 DC 0A A 00VA AC 00VA AC 0 AC A 0.A 0W DC 0W DC 0 DC A.A 70VA AC 00VA AC 0 AC A 0.A 0W DC W DC 0 DC A.A. On PDT relays, the maximum allowable total current of neighboring two poles is A. At the rated load, make sure that the total current of neighboring two poles does not exceed A (A + A = A).. Inductive load for the rated load cos ø = 0., L/R = 7 ms The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and.7 (mm) in width (DIN standard). Standard length is (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. Maximum Continuous Applied Voltage Operating Characteristics (values at 0 C) Pickup Voltage Dropout Voltage 0% 0% maximum 0% minimum 0% 0% maximum 0% minimum UL and c-ul Ratings Voltage Resistive General Use Horse Power Rating RU RU RU RU RU RU RU RU RU 0V AC 0A A A /0HP 0V DC 0A A A CSA Ratings Resistive Voltage RU 0V AC A 0V DC A TÜV Ratings Voltage Resistive Inductive RU RU RU RU RU RU 0V AC 0A A A A 0.A 0.A 0V DC 0A A A A.A.A Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

42 RU Switches & Pilot Lights Signaling Lights Socket Specifications Sockets Terminal Electrical Rating Wire Size Torque SUS-L Spring clamp terminals 0V/0A - AWG SUS-L Spring clamp terminals 0V/A (using RU), 0A (using RU) - AWG DIN Rail Mount SMS-0 M screw with captive wire clamp 00V, 0A Maximum up to #AWG. - in lbs Sockets SMS-0C M screw with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG. - in lbs SYS-0 M screw with captive wire clamp 00V, 7A (using RU), 0A (using RU) Maximum up to #AWG. - in lbs SYS-0C M screw with captive wire clamp, fingersafe 00V, 7A (using RU), 0A (using RU) Maximum up to #AWG. - in lbs Through Panel Mount Socket SYS- Solder 00V, 7A PCB Mount Socket SYS- PCB mount 00V, 7A SYS- PCB mount 0V, 7A Electrical Life Curves RU (Resistive Load) RU (Resistive Load) RU (Resistive Load) ( 0,000 operations) V AC 0V DC 0V DC ( 0,000 operations) V AC 0V DC 0V DC ( 0,000 operations) V AC 0V DC 0V DC Timers RU (Inductive Load) RU (Inductive Load) RU (Inductive Load) 000 0V AC/0V DC 0V DC 0V AC 0V DC 0V DC 0V AC 0V DC 0V DC Contactors ( 0,000 operations) 00 0 AC: cos ø = 0. DC: L/R = 7 ms ( 0,000 operations) 00 0 AC: cos ø = 0. DC: L/R = 7 ms ( 0,000 operations) 00 0 AC: cos ø = 0. DC: L/R = 7 ms Terminal Blocks Maximum Switching Current RU RU RU (Bifurcated) 0 AC resistive AC inductive (cos ø = 0.) Circuit Breakers 0. DC resistive DC inductive L/R = 7 ms Load Voltage (V) 7

43 RU Ambient Temperature vs. Temperature Rise Curves RU (AC Coil, 0 Hz) RU (AC Coil, 0 Hz) RU (DC Coil) Temperature Rise (C) Load current 0A poles Load current A poles 0 No load current Ambient Temperature (C) 0 70 Temperature Rise (C) Load current 0A poles Load current A poles No load current Ambient Temperature (C) Temperature Rise (C) Load current 0A poles Load current A poles RU/RU (AC Coil, 0 Hz) RU/RU (AC Coil, 0 Hz) RU/RU (DC Coil) Temperature Rise (C) Load current A poles Load current A poles No load current Temperature Rise (C) Load current A poles Load current A poles No load current Ambient Temperature (C) Ambient Temperature (C) The above temperature rise curves show the characteristics when 00% the rated coil voltage is applied. The heat resistance of the coil is 0 C. The slant dashed line indicates the allowable temperature rise for the coil at different ambient temperatures. Load current A x poles is for the RU models only. Temperature Rise (C) No load current Ambient Temperature (C) Load current A poles Load current A poles No load current Ambient Temperature (C) 0 70 Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

44 RU Switches & Pilot Lights Internal Connection (View from Bottom) RUS-* Standard RUS-*R with RC RUS-*D With Diode RUV-NF-* () () () () () () () () () () () () ()A ()A ()A ()A V AC/DC coil or less V DC coil or less Signaling Lights () () () () () () ()A ()A Over V AC/DC coil () () () () () () ()A ()A Over V DC coil RUS-*/RUS-* Standard RUS-*R/RUS-*R With RC RUS-*D/RUS-*D With Diode RUV-NF-*/RUV-NF-* () () () () () () (7) () () (0) () () ()A ()A V AC/DC coil or less () () () () () () (7) () () (0) () () ()A ()A () () () () () () (7) () () (0) () () ()A ()A V DC coil or less () () () () () () (7) () () (0) () () ()A ()A () () () () () () () () () () (7) () () () (7) () () (0) () () () (0) () () Timers ()A ()A Over V AC/DC coil ()A ()A Over V DC coil Dimensions (mm) RUS RUV Contactors Marking Plate Removal Slot.0 Marking Plate Removal Slot Terminal Blocks.0 7. ø.. Hole Marking plate removal slot is provided only on one side. Insert a flat screwdriver into the slot to remove the marking plate. 7. Mounting Hole Layout 7.0 -ø Holes Circuit Breakers All dimensions in mm. 7

45 7 RU RUS/RUS Marking Plate Removal Slot.0 Spring Clamp DIN Rail Mount Sockets SUS-L ø.. Hole Marking plate removal slot is provided only on one side. Insert a flat screwdriver into the slot to remove the marking plate Standard DIN Rail Mount Sockets SMS M Terminal Screw.. DIN Rail (BNDN) -ø. Mounting Holes Ring terminals cannot be used. Dimensions con t (mm) (Top View) -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min. (Top View) RUV/RUV Marking Plate Removal Slot SUS-L 0.. SYS Mounting Hole Layout M Terminal Screw ø Holes...0 DIN Rail (BNDN) All dimensions in mm. -ø. Mounting Holes Ring terminals cannot be used. -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min. 0 7 (Top View) 7 0 (Top View) Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 77

46 RU Switches & Pilot Lights Finger-safe DIN Rail Mount Sockets SMS-0C 0. M Terminal Screw ø.. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Dimensions con t (mm) SYS-0C 0. M Terminal Screw ø.. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) 7 Signaling Lights.. Ring terminals cannot be used. (Top View).. Ring terminals cannot be used. 0 (Top View) PCB Mount Sockets SMS- SMS (Bottom View) *. min. when using hold-down springs. min.* min. -ø holes (Tolerance 0.).. 0. Timers Contactors Terminal Blocks Circuit Breakers (Bottom View) 0... min.*.... min.** -ø holes (Tolerance 0.) * 7. min. when using a hold-down spring. **. min. when using a hold-down spring for the relay with check button. SYS- SYS (Bottom View) *. min. when using hold-down springs. min.* min. -ø holes (Tolerance 0.) (Bottom View) 0... min.* min.** -ø holes (Tolerance 0.) * 7. min. when using a hold-down spring. * *. min. when using a hold-down spring for the relay with check button Through Panel Mount Socket SYS- Panel Thickness: to [7 (N ) +.] (Bottom View) min.* N: No. of sockets mounted.. * 0. min. when using hold-down springs 7

47 RY/RM RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications All PDT types have arc barriers. Part Number Selection Part Number Contact Model Plug-in Terminal PC Board Terminal Coil Voltage Code DPDT (Slim) A DPDT (Wide) A PDT A Standard RYS-U 0 RYV-U 0 With Indicator RYS-UL 0 RYV-UL 0 With Check Button RYS-UC 0 With Indicator and Check Button RYS-ULC 0 Top Bracket Mounting RYS-UT 0 ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DV, DCV, DC0V With Diode (DC coil only) RYS-UD 0 RYV-UD 0 DCV, DCV, DCV, DCV, DC0V Standard RMS-U 0 RMV-U 0 With Indicator RMS-UL 0 RMV-UL 0 With Check Button RMS-UC 0 With Indicator and Check Button RMS-ULC 0 Top Bracket Mounting RMS-UT 0 With Diode (DC coil only) RMS-UD 0 With Indicator and Diode (DC coil only) RMS-ULD 0 Standard RYS-U 0 RYV-U 0 With Indicator RYS-UL 0 RYV-UL 0 With Check Button RYS-UC 0 With Indicator and Check Button RYS-ULC 0 Top Bracket Mounting RYS-UT 0 With Diode (DC coil only) RYS-UD 0 With Indicator and Diode (DC coil only) RYS-ULD 0 Top mount models are designed to mount directly to a panel and do not require a socket. RYACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V DCV, DCV, DCV, DCV, DC00-0V ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V DCV, DCV, DCV, DCV, DC00-0V Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RYS-U AC0-0V Part No. Coil Voltage Code Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

48 RY/RM Switches & Pilot Lights Sockets Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount Through Panel Mount RYS SYS-0 SYS-0C SYS- SYS- RM SMS-0 SMS-0C SMS- RYS SYS-0 SYS-0C SYS- SYS- SYS- PCB Mount Circuit Breakers Signaling Lights Hold Down Springs & Clips Appearance Item Relay Pullover Wire Spring Leaf Spring (side latch) For DIN Mount Socket RYS SYS-0F SYS-F RM RYS RYS RM, RYS SYS-F SFA-0 For Through Panel & PCB Mount Socket SYS-F SFA-0 RYS Timers Leaf Spring (top latch) RM RYS SFA-0 SFA-0. Not available for PCB mount socket SYS-.. Order pieces per relay. Contactors Accessories Item Appearance Use with Part No. Remarks Aluminum DIN Rail ( meter length) All DIN rail sockets BNDN000 The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and.7 (mm) in width (DIN standard). Standard length is (,000mm). DIN Rail End Stop DIN rail BNL. mm wide. Terminal Blocks Replacement Hold-Down Spring Anchor Horseshoe clip for all DIN rail sockets Y77-0 For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. 00

49 RY/RM Specifications Contact Model Standard Contact RY - DPDT Slim RM - DPDT Wide RY - PDT Contact Material Gold-plated silver Silver Gold-plated silver Contact Resistance 0 mω maximum 0 mω maximum 0 mω maximum Minimum Applicable Load Operating Time Release Time Power Consumption (approx.) Insulation Resistance V DC, ma; V DC, 0 ma (reference value) AC:. VA (0 Hz), VA (0 Hz) DC: 0.W V DC, 0 ma; V DC, 0 ma (reference value) 0 ms maximum 0 ms maximum AC:. VA (0 Hz),. VA (0 Hz) DC: 0.W 00 MΩ minimum (00V DC megger) Between live and dead parts: V DC, ma; V DC, 0 ma (reference value) AC:. VA (0 Hz),. VA (0 Hz) DC: 0.W 00V AC, minute 000V AC, minute 000V AC, minute Between contact and coil: Dielectric Strength 00V AC, minute 000V AC, minute 000V AC, minute Between contacts of different poles: 00V AC, minute 000V AC, minute 000V AC, minute Between contacts of the same pole: 000V AC, minute 000V AC, minute 000V AC, minute Operating Frequency Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Vibration Resistance Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Shock Resistance Damage limits: 000 m/s Operating extremes: 00 m/s (DPDT Slim), 00 m/s (PDT, DPDT Wide) Mechanical Life 0,000,000 operations Electrical Life 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) Operating Temperature to + C (no freezing) to + C (no freezing) to + C (no freezing) Operating Humidity to % RH (no condensation) Weight (approx.) g g g Note: Above values are initial values.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing Release time of relays with diode: 0 ms maximum. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. The operating temperature range of relays with indicator or diode is to +0 C.. When the total current of contacts is less than A, the operating temperature range is to +70 C. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 0

50 RY/RM Switches & Pilot Lights Signaling Lights AC Coil Ratings Voltage (V) DPDT Slim Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±0% AC 0Hz AC 0Hz at 0 C DPDT Wide & PDT DPDT Slim DPDT Wide & PDT DPDT Slim DPDT Wide & PDT , , , , ,0 0..,70 Operation Characteristics (against rated values at 0ºC) Max. Continuous Applied Voltage Pickup Voltage 0% 0% maximum Dropout Voltage 0% minimum Circuit Breakers Terminal Blocks Contactors Timers DC Coil Ratings Voltage (V) Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±0% at 0 C DPDT Slim DPDT Wide & PDT DPDT Slim DPDT Wide & PDT ,0, ,0 0,00 Contact Ratings Contact DPDT Slim (RY) DPDT Wide (RM) PDT (RY) Continuous Current A A A Maximum Contact Capacity Allowable Contact Power Rated Load Resistive Load Inductive Load Voltage (V) Res. Load Ind. Load 0 VA AC 0W DC 00VA AC 0W DC 00 VA AC 0W DC 7 VA AC W DC 0VA AC 7W DC VA AC 0W DC Note: Inductive load for the rated load cos ø = 0., L/R = 7 ms TÜV Ratings Voltage DPDT DPDT Slim Wide PDT 0V AC A A A 0V DC A A A AC: cos ø =.0, DC: L/R = 0 ms 0V AC A.A 0V AC A 0.A 0V DC A.A 0V AC A.A 0V AC A A 0V DC A.A 0V AC A.A 0V DC A A Max. Continuous Applied Voltage Operation Characteristics (against rated values at 0ºC) Pickup Voltage Dropout Voltage 0% 0% maximum 0% minimum UL Ratings Voltage DPDT Slim Resistive DPDT Wide PDT DPDT Slim General use DPDT Wide PDT 0V AC A A A 0.A A A 0V AC.A.A 00V DC 0.A 0.A 0.A 0.A 0.A 0V DC A A A A A CSA Ratings Voltage DPDT Slim Resistive DPDT Wide PDT DPDT Slim General use DPDT Wide PDT 0V AC A A A 0.A A A 0V AC A A.A.A 00V DC 0.A 0.A 0.A 0V DC A A A.A.A.A 0

51 RY/RM Socket Specifications DIN Rail Mount Sockets Finger-safe DIN Rail Mount Through Panel Mount Socket PCB Mount Socket Sockets Terminal Electrical Rating Wire Size Torque SYS-0 M screws with captive wire clamp 00V, 7A Maximum up to #AWG. - in lbs SMS-0 M screw with captive wire clamp 00V, 0A Maximum up to #AWG. - in lbs SYS-0 M screw with captive wire clamp 00V, 7A* Maximum up to #AWG. - in lbs SYS-0C M screws with captive wire clamp, fingersafe 00V, 7A Maximum up to #AWG. - in lbs SMS-0C M screw with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG. - in lbs SYS-0C M screw with captive wire clamp, fingersafe 00V, 7A* Maximum up to #AWG. - in lbs SYS- Solder 0V, 7A SMS- Solder 0V, 0A SYS- Solder 0V, 7A* SYS- PCB Mount 00V, 7A SYS- PCB Mount 00V, 7A SYS- PCB Mount 0V, 7A * When using only poles of the -poles, the UL recognized current is 0A. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 0

52 RY/RM Switches & Pilot Lights Signaling Lights Electrical Life Curves AC Load (RY) Life ( 0,000 operations) V AC resistive 0V AC resistive 0V AC inductive 0V AC inductive Characteristics (Reference Data) (RY) Life ( 0,000 operations) V AC resistive V AC inductive (RM) 0V AC resistive 0V AC resistive Life ( 0,000 operations) V AC inductive 0V AC inductive 0 0 Timers DC Load (RY) 0V DC resistive ` (RY) 000 0V DC inductive Contactors Life ( 0,000 operations) V DC resistive 0 00V DC inductive 0 Life ( 0,000 operations) 00 0V DC resistive 00 0V DC inductive Terminal Blocks (RM) Life ( 0,000 operations) V DC resistive 0V DC inductive 00V DC resistive 00V DC inductive Circuit Breakers

53 RY/RM Maximum Switching Capacity (RY) (RM) DC inductive AC resistive AC inductive DC resistive Load Voltage (V) DC inductive AC resistive AC inductive DC resistive Load Voltage (V) (RY) DC resistive DC inductive AC resistive AC inductive Load Voltage (V) Continuous Load Current vs. Operating Temperature Curve (Standard Type, With Check Button, and Top Bracket Mounting Type) (RY) Operating Temperature (C) AC Coil DC Coil (RY) Operating Temperature (C) AC Coil DC Coil (RM) Operating Temperature (C) AC Coil DC Coil Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 0

54 RY/RM Switches & Pilot Lights Internal Connection (View from Bottom) Standard Type DPDT Slim (RY) DPDT Wide (RM) PDT (RY) With Check Button Front Pushbutton Contacts can be operated by pressing the check button. Signaling Lights With Indicator (-L type) DPDT Slim (RY) DPDT Wide (RM) PDT (RY) Coil Below 00V AC/DC Coil 00V AC/DC and over Coil Below V AC/ DC Coil V AC/DC and over When the relay is energized, the indicator goes on. An LED protection diode is not contained in DPDT relays for coils below 00V DC. If coil polarity is reversed LED will not light. With Diode (-D type) DPDT Slim (RY) DPDT Wide (RM) PDT (RY) Timers Contains a diode to absorb the back emf generated when the coil is de-energized. The release time is slightly longer. Diode Characteristics Reverse withstand voltage:,000v Forward current: A Contactors With Indicator and Diode (-LD type) DPDT Wide (RM) PDT (RY) DPDT Wide (RM) PDT (RY) Coil Below V DC Coil V DC and over ( ) (+) 0 7 ( ) (+) Contains an LED indicator and a surge absorber. Circuit Breakers Terminal Blocks 0

55 RY/RM. Dimensions (mm) RYS RYS RMS Total length from panel surface including relay socket SYS-0:. (.) max., SYS-:. (.) max. ø. oblong hole 0. Dimensions in the ( ) include a hold-down spring... max.. 7. Total length from the panel surface including relay socket SYS-0:. (.) max., SYS-:. (.) max.. ø. oblong hole Dimensions in the ( ) include a hold-down spring max.. RYV RYV RMV max ø holes max ø holes RYS-UT RYS-UT RMS-UT.. ø. oblong hole max ø. oblong hole max Total length from the panel surface including relay socket. SMS-0:. (.) max., SMS-:. (.) max. Dimensions in the ( ) include a hold-down spring. 0.. ø. hole. 0.. max max.... ø. hole max ø hole Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 07

56 RY/RM Switches & Pilot Lights Signaling Lights Standard DIN Rail Mount Sockets SYS SYS-0. M Terminal Screw.. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min. Dimensions (Top View) SMS M Terminal Screw.. DIN Rail (BNDN). max. -ø. Mounting Holes (or M Tapped Holes) max.. min. ø. min. (Top View) M Terminal Screw.. DIN Rail (BNDN). max. -ø. Mounting Holes (or M Tapped Holes) max.. min. ø. min. 7 0 (Top View) Finger-safe DIN Rail Mount Sockets SYS-0C SMS-0C Timers M Terminal Screw Contactors Terminal Blocks Circuit Breakers ø... DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (Top View). 0 ø.. M Terminal Screw.. DIN Rail (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (Top View) SYS-0C 0 M Terminal Screw. DIN Rail (BNDN) ø. -ø. Mounting Holes (or M Tapped Holes) 7... Ring terminals cannot be used. 0 (Top View) 0

57 RY/RM Through Panel Mount Socket SYS-. SYS Panel Thickness: to Panel Thickness: to 0. PCB Mount Sockets SYS-. SYS (Bottom View) 7 0 (Bottom View) (Bottom View) 7 0 (Bottom View) min.* min.*. *. min. when using hold-down springs [(N )+.] N: No. of sockets mounted * 0. min. when husing hold-down springs [7 (N ) +.] N: No. of sockets mounted * 0. min. when using hold-down springs. min.* min.* min. -ø holes (Tolerance 0.). min.** -ø holes (Tolerance 0.) * 7. min. when using a hold-down spring. * *. min. when using a hold-down spring for the relay with check button SMS- 7. SYS Panel Thickness: to (Bottom View) 7 0 (Bottom View) min.* *. min. when using hold-down springs [7 (N ) +.] N: No. of sockets mounted * 0. min. when using hold-down springs. min.* min. -ø holes (Tolerance 0.) Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 0

58 RFV Switches & Pilot Lights Signaling Lights Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, NO-NC) -pole (NO-NC, NO-NC, NO-NC) Built-in LED indicator available. Fast response time ( ms maximum). High shock resistance (00 m/s minimum) Finger-safe DIN rail mount socket and PC board mount socket. RFV Force Guided Relays/SFV Relay Sockets Applicable Standard Marking Certification Organization/ File Number UL0 CSA C. No. EN00 EN0- UL/c-UL File No. E TÜV SÜD Part Number Selection Part Number Contact Without LED Indicator With LED Indicator Rated Coil Voltage RFV-AB-D RFV-ABL-D V DC Timers -pole NO-NC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC NO-NC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC NO-NC RFV-AB-D RFV-ABL-D V DC Contactors -pole NO-NC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC NO-NC RFV-AB-D RFV-ABL-D V DC RFV-AB-D RFV-ABL-D V DC Circuit Breakers Terminal Blocks Sockets Style No. of Poles Ordering Type No. DIN Rail Mount Sockets PC Board Mount Sockets SFV--07L SFV--07L SFV-- SFV-- Certification for Sockets Applicable Standard UL0 CSA C. No. EN7000 EN700 Marking Certification Organization/ File Number UL/c-UL File No. E7 TÜV SÜD EC Low Voltage Directive (DIN rail mount sockets only) 0

59 RFV Coil Ratings -pole -pole Contact NO-NC NO-NC NO-NC NO-NC NO-NC Rated Coil Voltage (V) Rated Current (ma) ±0% (at 0 C) V DC 0 00 V DC 00 V DC V DC 0 00 V DC 00 V DC V DC.7 V DC 0. V DC 0. 0 V DC.7 V DC 0. V DC 0. 0 V DC.7 V DC 0. V DC 0. 0 Coil Resistance (Ω) ±0% (at 0 C) Pickup Voltage. For relays with LED indicator, the rated current increases by approx. ma.. Maximum continuous applied voltage is the maximum voltage that can be applied to relay coils. Accessories DIN Rail End Clip Operating Characteristics (at 0 C) Dropout Voltage 7% maximum 0% minimum 0% Item Appearance Specifications Type No. Remarks Aluminum Weight: Approx. 0g Metal (zinc plated steel) Weight: Approx. g BNDN000 BNL BNL Length: Width: m mm Maximum Continuous Applied Voltage Power Consumption Approx. 0.W Approx. 0.W Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada

60 RFV Terminal Blocks Contactors Timers Signaling Lights Switches & Pilot Lights Specifications Number of Poles -pole -pole Contact Configuration NO-NC NO-NC NO-NC NO-NC NO-NC Contact Resistance (initial value) Contact Material Rated Load (resistive load) Allowable Switching Power (resistive load) Allowable Switching Voltage Allowable Switching Current Minimum Applicable Load 00 mω maximum AgSnO (Au flashed) A 0V AC, A 0V DC 00 VA, 0W 0V AC, 0V DC A V DC, ma (reference value) Power Consumption (approx.) 0.W 0.W Insulation Resistance Between contact and coil Dielectric Strength Between contacts of different poles 000 MΩ minimum (00V DC megger, same measurement positions as the dielectric strength) 000V AC, minute 00V AC, minute Between contacts 7- and V AC, min. Between contacts - and - Between contacts - and 7- Between contacts - and -0 00V AC, minute Between contacts 7- and - Between contacts -0 and - Between contacts - and - 000V AC, min. Between contacts - and - Between contacts - and 7- Between contacts - and -0 Between contacts 7- and -0 Between contacts of the same pole 00V AC, minute Operating Time (at 0 C) 0 ms maximum (at the rated coil voltage, excluding contact bounce time) Response Time (at 0 C) ms maximum (at the rated coil voltage, excluding contact bounce time) Release Time (at 0 C) 0 ms maximum (at the rated coil voltage, excluding contact bounce time) Vibration Operating Extremes 0 to Hz, amplitude 0.7 mm Resistance Damage Limits 0 to Hz, amplitude 0.7 mm Shock Operating Extremes (half sine-wave pulse: ms) 00 m/s, when mounted on DIN rail mount socket: 0 m/s Resistance Damage Limits (half sine-wave pulse: ms) 000 m/s Electrical Life 0V AC A resistive load: 00,000 operations minimum (operating frequency 00 per hour) 0V DC A resistive load: 00,000 operations minimum (operating frequency 00 per hour) 0V AC A resistive load: 00,000 operations minimum (operating frequency 00 per hour) 0V DC A resistive load: 00,000 operations minimum (operating frequency 00 per hour) [AC ] 0V AC A inductive load: 00,000 operations minimum (operating frequency 00 per hour, cos ø = 0.) [DC ] V DC A inductive load: 00,000 operations minimum (operating frequency 00 per hour, L/R = ms) Mechanical Life 0 million operations minimum (operating frequency 0,00 operations per hour) Operating Temperature 0 to + C (no freezing) Operating Humidity to %RH (no condensation) Storage Temperature 0 to + C Operating Frequency (rated load) 00 operations per hour Weight (approx.) 0g g. Measured using V DC,A voltage drop method.. Failure rate level P (reference value). Response time is the time until NO contact opens, after the coil voltage is turned off.. When using at 70 to C, reduce the switching current by 0.A/ C. Circuit Breakers

61 RFV Socket Specifications Part Number SFV--07L SFV--07L SFV-- SFV-- Rated Current A Rated Voltage 0V AC/DC Insulation Resistance 000 MΩ minimum (00V DC megger, between terminals) Dielectric Strength 00V AC, minute (between terminals) Screw Terminal Style M slotted Phillips screw Applicable Wire 0.7 to. mm ( AWG to AWG) Recommended Screw Tightening Torque 0. to 0. N m Terminal Strength Wire tensile strength: 0N min. Vibration Resistance Damage limits: 0 to Hz, amplitude 0.7 mm Resonance: 0 to Hz, amplitude 0.7 mm Shock Resistance 000 m/s Operating Temperature 0 to + C (no freezing) Operating Humidity to % RH (no condensation) Storage Humidity 0 to + C Degree of Protection IP0 (finger-safe screw terminals) Weight (approx.) 0g g g 0g. When using at 70 to C, reduce the switching current by 0.A/ C. Applicable Crimping Terminals Specifications. max..0 min..0 max.. min. Note: Ring tongue terminals cannot be used. Characteristics Maximum Switching Capacity Electrical Life Curve Notes on Contact Gaps except Welded Contacts 0 DC Resistive Load Load Voltage (V) AC Resistive Load 0 Life ( 0,000 operations) V AC Resistive Load 0V DC Resistive Load 0. 0 Example: RFV-AB-D If the NO contact (7- or -0) welds, the NC contact (- or -) remains open even when the relay coil is de-energized, maintaining a gap of 0. mm. The remaining unwelded NO contact (-0 or 7-) is either open or closed. If the NC contact (- or -) welds, the NO contact (7- or -0) remains open even when the relay coil is energized, maintaining a gap of 0. mm. The remaining unwelded NC contact (- or -) is either open or closed. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada

62 RFV Switches & Pilot Lights RFV Dimensions (mm) RFV (-pole) RFV (-pole) PC Board Terminal type Mounting Hole Layout (Bottom View) 0 max. 0 max. RFV (-pole) 0-. hole max. max. Signaling Lights max max ±0. (.).0 ±0..7±0.. ±0..0 RFV (-pole) -. hole Internal Connection (View from Bottom) With Indicator and Diode (-LD type) RFV (-pole) RFV (-pole) ±0. 0. Timers Contactors Circuit Breakers Terminal Blocks (.).7±0. ± ±0..0 ±0..0 ±0.. ±0. Without LED Indicator Without LED Indicator NO-NC Contact NO-NC Contact NO-NC Contact NO-NC Contact NO-NC Contact With LED Indicator With LED Indicator NO-NC Contact NONC Contact NO-NC Contact NO-NC Contact NO-NC Contact

63 RFV SFV--07L (-pole)... ±0. (Internal Connection) 0 7 (Top View). M Terminal Screw (Panel Mounting Hole Layout) SFV DIN Rail Mount Socket Dimensions (mm) ø... R. 0.0 ±0. M. or ø holes (Top View). 7. SFV--07L (-pole) (Internal Connection).. ± (Top View). M Terminal Screw ø.. (Panel Mounting Hole Layout). R. 0.0 ±0. M. or ø holes (Top View). 7. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada

64 RFV Switches & Pilot Lights SFV--07L (-pole) 0 max. max. SFV PC Board Mount Sockets SFV--07L (-pole) 0 max. max. Signaling Lights () () max () () max ø. holes for M self-tapping screws. ±0.. ±0.. ±0. 0- ø. hole 7 -ø. holes for M self-tapping screws ±0. ±0.... ±0. -ø. hole Circuit Breakers Terminal Blocks Contactors Timers ±0. (..7 ±0..0 ±0.. ±0..0 ±0. ±0. 0. (.).7±0..0 ± ±0. ±0. ±0..0

65 Operating Instructions Driving Circuit for Relays. To ensure correct relay operation, apply rated voltage to the relay coil.. Input voltage for the DC coil: A complete DC voltage is best for the coil power to make sure of stable relay operation. When using a power supply containing a ripple voltage, suppress the ripple factor within %. When power is supplied through a rectification circuit, the relay operating characteristics, such as pickup voltage and dropout voltage, depend on the ripple factor. Connect a smoothing capacitor for better operating characteristics as shown below. Smoothing Capacitor + R Relay Operating Instructions Protection for Relay Contacts Pulsation Emin Emax Emean DC Ripple Factor (%) Emax Emin Emean 00% Emax = Maximum of pulsating current Emin = Minimum of pulsating current Emean = DC mean value. Leakage current while relay is off: When driving an element at the same time as the relay operation, special consideration is needed for the circuit design. As shown in the incorrect circuit below, leakage current (Io) flows through the relay coil while the relay is off. Leakage current causes coil release failure or adversely affects the vibration resistance and shock resistance. Design a circuit as shown in the correct example. Incorrect R Io TE Correct. Surge suppression for transistor driving circuits: When the relay coil is turned off, a high-voltage pulse is generated, causing a transistor to deteriorate and sometimes to break. Be sure to connect a diode to suppress the back electromotive force. Then, the coil release time becomes slightly longer. To shorten the coil release time, connect a Zener diode between the collector and emitter of the transistor. Select a Zener diode with a Zener voltage slightly higher than the power voltage. Back emf suppressing diode + R Relay R. The contact ratings show maximum values. Make sure that these values are not exceeded. When an inrush current flows through the load, the contact may become welded. If this is the case, connect a contact protection circuit, such as a current limiting resistor.. Contact protection circuit: When switching an inductive load, arcing causes carbides to form on the contacts, resulting in increased contact resistance. In consideration of contact reliability, contact life, and noise suppression, use of a surge absorbing circuit is recommended. Note that the release time of the load becomes slightly longer. Check the operation using the actual load. Incorrect use of a contact protection circuit will adversely affect switching characteristics. Four typical examples of contact protection circuits are shown in the following table: RC Diode Varistor Power + Power Power C D Varistor R Ind. Load Ind. Load Ind. Load This protection circuit can be used when the load impedance is smaller than the RC impedance in an AC load power circuit. R: Resistor of approximately the same resistance value as the load C:0. to µf This protection circuit can be used for both AC and DC load power circuits. R: Resistor of approximately the same resistance value as the load C: 0. to µf This protection circuit can be used for DC load power circuits. Use a diode with the following ratings. Reverse withstand voltage: Power voltage of the load circuit x 0 Forward current: More than the load current This protection circuit can be used for both AC and DC load power circuits. For a best result, when using a power voltage of to V AC/DC, connect a varistor across the load. When using a power voltage of 00 to 0V AC/DC, connect a varistor across the contacts.. Do not use a contact protection circuit as shown below: C Power C Power Load Load This protection circuit is very effective in arc suppression when opening the contacts. But, the capacitor is charged while the contacts are opened. When the contacts are closed, the capacitor is discharged through the contacts, increasing the possibility of contact welding. This protection circuit is very effective in arc suppression when opening the contacts. But, when the contacts are closed, a current flows to charge the capacitor, causing contact welding. Generally, switching a DC inductive load is more difficult than switching a DC resistive load. Using an appropriate arc suppressor, however, will improve the switching characteristics of a DC inductive load. Soldering. When soldering the relay terminals, use a soldering iron of 0 to 0W, and quickly complete soldering (within approximately seconds).. Use a non-corrosive rosin flux. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada 7

66 Operating Instructions Timers Signaling Lights Switches & Pilot Lights Other Precautions. General notice: To maintain the initial characteristics, do not drop or shock the relay. The relay cover cannot be removed from the base during normal operation. To maintain the initial characteristics, do not remove the relay cover. Use the relay in environments free from condensation, dust, sulfur dioxide (SO ), and hydrogen sulfide (H S). Make sure that the coil voltage does not exceed applicable coil voltage range. Turn off the power to the relay before starting installation, removal, wiring, maintenance, and inspection of the relays. Failure to turn power off may cause electrical shock or fire hazard. Observe specifications and rated values, otherwise electrical shock or fire hazard may be caused. Use wires of the proper size to meet voltage and current requirements. Tighten the terminal screws on the relay socket to the proper tightening torque. Surge absorbing elements on AC relays with RC or DC relays with diode are provided to absorb the back electromotive force generated by the coil. When the relay is subject to an excessive external surge voltage, the surge absorbing element may be damaged. Add another surge absorbing provision to the relay to prevent damage. Operating Instructions con t. UL and CSA ratings may differ from product rated values determined by IDEC.. Do not use relays in the vicinity of strong magnetic field, as this may affect relay operation. Safety Precautions Precautions for the RU Relays Before operating the latching lever of the RU relay, turn off the power to the RU relay. After checking the circuit, return the latching lever to the original position. Do not use the latching lever as a switch. The durability of the latching lever is a minimum of 00 operations. When using DC loads on PDT relays, apply a positive voltage to terminals of neighboring poles and a negative voltage to the other terminals of neighboring poles to prevent the possibility of short circuits. DC relays with a diode have a polarity in the coil terminals. Apply the DC voltage to the correct terminals. Circuit Breakers Terminal Blocks Contactors

67 RSC Key features: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design Choice of 0A, 0A and A models LED indicator Finger-safe terminals Zero voltage switching Back-to-back SCR output Direct Bond Copper (DBC) substrate construction Built-in transient protection (TVS) 00k-cycle UL0 endurance rating UL Recognized, TUV Approved, CE Marked Lead free and RoHS compliant EMC (Level ) & IEC compliant UL Recognized File No. E77 Part Number Selection -V DC 0-0V AC Input Control Voltage 0-0V AC *Input control voltage is 0-0V AC. Output Current Rating 0A 0A A 0A 0A A 0A 0A A RSC Series Solid State Relays Part Number RSCDN-0A RSCDN-0A RSCDN-A RSCAN-0A RSCAN-0A RSCAN-A RSCAN-0A RSCAN-0A RSCAN-A* Specifications General Characteristics Model 0A 0A A -0 to +0 Operating temperature (ºC) -0 to +0 (0-0 V AC input models) Storage temperature (ºC) -0 to +00 Input-to-Output isolation voltage (Vrms) 00 Input/Output to ground isolation voltage (Vrms) 000 Operating frequency (Hz) 7 to Housing material Heat sink material UL-V0 Self-extinguishing polycarbonate Anodized aluminum black Protection (IEC 0) - Casing IP0 Input terminal wire size (stranded and solid) AWG to AWG Input terminal tightening torque (Nm) 0. Output terminal wire size (stranded) AWG to AWG Output terminal wire size (solid) 0 AWG to AWG Output terminal tightening torque (Nm). Weight (g) 00 Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada

68 RSC Switches & Pilot Lights Signaling Lights Specifications con t Safety Standards Conformity to standards Model 0A 0A A Vibrations according to IEC/ EN00-- Shock test IEC Immunity to electrostatic discharges IEC/EN Immunity to electrostatic fields ENV 00/0 (IEC 000--) Immunity to rapid transient bursts to IEC Immunity to shock waves according to IEC/EN Immunity to radio frequency in common mode acc. to ENV (CEI 000--) Conducted and radiated noise for industrial environments per CISPR IEC IEC 07-- (AC ) IEC 07-- (AC a) CE compliant with LVD 7//EEC TUV certified per EN 00 c-ur per C..no. - UL recognized per UL 0 mm / 0- Hz G / ms Level Level Level Level Level Class A Pollution Degree Overvoltage Category III Circuit Breakers Terminal Blocks Contactors Timers Input Specifications Output Specifications Model 0A, 0A, A Input voltage (V) -V DC 0-0V AC 0-0V AC* Turn-off voltage (V) 0 0 Max. controlled current (ma) 0 Min. input current (ma) Turn-on time (ms). (0Hz) / 0 (0Hz) 0 0 Max. turn-off time (ms). (0Hz) / 0 (0Hz) 0 0. LED is not an absolute indicator of power being present.. *A model is 0-0V AC Model 0A 0A A Voltage range (Vrms max) Non-rep. peak voltage (Vpeak) Maximum off-state leakage at Vmax and T = ºC (µa) Current 0ºC (A) 0 0 Minimum current (ma) On-state voltage drop at I max (Vpeak)... I t (t = 0 ms) (A s) (0/0 Hz) /00 0/0 00/00 Static (off-state) dv/dt (V/µs) HP ratings at 0V / /. HP ratings at 0V HP ratings at 0V Utilization category AC- (A) 0 0 Utilization Category AC- (A) 0 Max. non-rep. s surge (T=ºC) (A) Max. non-rep.-cycle surge (T=ºC) (A)

69 RSC Dimensions (mm) 0A/0A Models A Model Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers 00--IDEC () USA & Canada

70 RSS Switches & Pilot Lights Signaling Lights Key features: Input status LED Indicator Dual SCR output Direct bond copper substrate Internal transient protection built-in snubber EMC compliant (level ) Photo isolation 00 Volt blocking voltage 000 Volt optical isolation Zero voltage turn-on High surge capability Optional fingersafe terminal cover (RSS-CVR) RSS Series Panel Mount Solid State Relays UL Recognized File No. E77 Timers Part Number Selection AC Input 0-0V AC Input Continuous Output Current 0A A 0A 7A 0A 0A Part Number RSSAN-0A RSSAN-A RSSAN-0A RSSAN-7A RSSAN-0A RSSDN-0A Specifications Input Specifications Series RSSDN RSSAN Voltage Range to V DC 0 to 0V AC Input Current current regulated (0mA) Pick Up Voltage V DC 0V AC Drop Out Voltage V DC 0V AC Dielectric Strength (Input-Output-Base) 000 RMS (min) 000 RMS (min) Capacitance (Input to Output) pf pf DC Input -V DC A 0A RSSDN-A RSSDN-0A Rev. Voltage Protection Yes ( VDC) N/A Current (continuous) 0A A 0A 7A 0A 7A RSSDN-7A 0A RSSDN-0A Contactors Terminal Blocks Circuit Breakers -Cycle Surge Current 0A 00A 70A 000A 00A -Second Surge Current 0A 7A 0A A 00A Output Specifications Minimum Holding Current 0mA 0mA 00mA 00mA 00mA Voltage Drop at Rated Current.V (maximum) Voltage Range - 0V AC Output Dual SCR (N.O.) Over Voltage Rating 00 PIV Frequency Range 7 to 0Hz Off-State Leakage at Rated Voltage 0mA (maximum) Turn-On Time Turn-Off Time Zero Voltage Switching Static DV/DT Commutating DV/DT / 0Hz / 0Hz Yes 00V/µsec Snubbed for 0. power factor at rated load Weight 0g (approx.)