I-TECH INDUCTIVE TECHNOLOGIES, INC.
|
|
- Ashley Sutton
- 5 years ago
- Views:
Transcription
1 INDUCTIVE TECHNOLOGIES, INC. n Toroidal and Pot Core Inductors n Pot Core Flyback Transformers n Drum Core Power Inductors n Surface Mount Power Inductors n Current Sense Transformers n T1/CEPT/ISDN Primary Transformers n Surface Mount Toroids n Common Mode Chokes
2 Table of Contents Toroidal and Pot Core Inductors Pot Core Flyback Transformers Drum Core Power Inductors T1/CEPT/ISDN Primary Transformers Surface Mount Toroids Surface Mount Power Inductors Common Mode Chokes Current Sense Transformers
3 Inductive Technologies (I-Tech) was originally founded in 1998 when the magnetics division of C&K Components, Inc. of Watertown, Massachusetts was spun off. In the spring of 2010, Electro Technik Industries, Inc. (ETI) acquired Inductive Technologies. With this purchase, ETI obtained a magnetics company with an extensive line of standard products. All of the components are still manufactured in Costa Rica. Since an Electro Technik manufacturing facility in San Jose and I-Tech's were practically neighbors before the acquisition, the integration of the two has been made virtually seamless. 3
4 Drum Core Power Inductors Broad range of inductance values; H. From low to high currents; Amps. Small PCB space, in 5 standard sizes. Very stable inductance over current range. Class B (130 C) insulation system. Other sizes and values are available. AT ( H) 25 C LEAD WIRE A (AWG) DIMENSION B C Size 2 AT ( H) 25 C Ohms LEAD DIMENSION WIRE A B C
5 Vertical Mount Toroidal Inductors 418 SERIES VERTICAL MOUNT TOROIDAL INDUCTORS Open Frame construction in Vertical mount with through-hole mounting. Powdered Iron Core Low heat and noise (EMI/RFI) emission. Built to meet UL Class B (130C) requirements. High Inductance to space ratio. REFERENCE OPERATING VALUES INDUCANCE MINIMUM ET VALUE ( H) (V s) (Adc) DESIGN CONTROL VALUES NDUCTANCE NO DC +/- 20% ( H)* Note: Originally designed for use with National Semiconductor s Simple Switchers Step-Down Voltage Regulator Series: LM1575-XX/LM2575-XX and LM1577-XX/LM2577-XX. Measured criteria: 10mV / 15 KHz. 5
6 Toroidal and Pot Core Inductors 415 SERIES POT CORE INDUCTOR Inductors from 47 H to 2200 H. Current ratings from 0.42 A to 3 A. Low heat and noise (EMI/RFI) emission. Meets UL Class B (130 C) requirements. High Inductance to space ratio. REFERENCE OPERATING VALUES MINIMUM ET (V s) INDUCANCE VALUE ( H) (Adc) DESIGN CONTROL VALUES NO DC +/- 20% ( H)* A In. (mm) (29.51) DIMENSIONS +/ (0.76) B C In. In. (mm) (mm) (18.42) (21.59) D In. (mm) (10.92) (32.69) (22.00) (25.15) (13.76) (44.45) (30.99) (35.92) (20.07) Note: Originally designed for use with National Semiconductor s Simple Switchers Step-Down Voltage Regulator Series: LM1575-XX/LM2575-XX and LM1577-XX/LM2577-XX. 6
7 Pot Core Flyback Transformers Pot Core/ Touchtone designs. High Inductance to space ratio. Low heat and noise (EMI/RFI) emission. Built to meet UL Class B (130 C). Originally designed for use with National Semiconductor s Simple Switchers. Step- Down Voltage Regulator Series: LM1575-XX/LM2575-XX and LM1577-XX/LM2577-XX. Hipot tested 500Vdc PRIMARY INPUT VOLTAGE DUAL OUTPUT VOLTAGE (V) OUPUT (ma) DRAWING AND SCHEMATIC ( H) (V) (90-110) 5 +/- 15V ( ) 12 +/- 15V ( ) 15 +/- 15V * Measured criteria: 10kHz. 7
8 Drum Core Power Inductors Broad range of inductance values; H. From low to high currents; Amps. Small PCB space, in 5 standard sizes. Very stable inductance over current range. Class B (130 C) insulation system. Other sizes and values are available. AT ( H) 25 C LEAD WIRE A (AWG) DIMENSION B C Size 1 AT ( H) 25 C LEAD WIRE A (AWG) B DIMENSION Measured criteria: 1V / 15 KHz. C 8
9 Drum Core Power Inductors Broad range of inductance values; H. From low to high currents; Amps. Small PCB space, in 5 standard sizes. Very stable inductance over current range. Class B (130 C) insulation system. Other sizes and values are available. AT ( H) 25 C LEAD WIRE A (AWG) DIMENSION B C Size 2 AT ( H) 25 C Ohms LEAD DIMENSION WIRE A B C Measured criteria: 1V / 15 KHz. 9
10 Drum Core Power Inductors Broad range of inductance values; H. From low to high currents; Amps. Small PCB space, in 5 standard sizes. Very stable inductance over current range. Class B (130 C) insulation system. Other sizes and values are available. AT ( H) 25 C LEAD WIRE A (AWG) DIMENSION B C Size 3 AT ( H) 25 C LEAD WIRE A (AWG) B DIMENSION Measured criteria: 1V / 15 KHz. C 10
11 Drum Core Power Inductors Broad range of inductance values; H. From low to high currents; Amps. Small PCB space, in 5 standard sizes. Very stable inductance over current range. Class B (130 C) insulation system. Other sizes and values are available. AT ( H) 25 C LEAD WIRE A (AWG) DIMENSION B C Size 4 AT ( H) 25 C LEAD WIRE A (AWG) B DIMENSION Measured criteria: 1V / 15 KHz. C 11
12 Drum Core Power Inductors Broad range of inductance values; uH. From low to high currents; Amps. Small PCB space, in 5 standard sizes. Very stable inductance over current range. Class B (130 C) insulation system. Other sizes and values are available. AT ( H) 25 C LEAD WIRE A (AWG) DIMENSION B C Size 5 AT ( H) 25 C LEAD WIRE A (AWG) B DIMENSION C Measured criteria: 1V / 15 KHz. 12
13 Primary Transformers T1/CEPT/ISDN Normal temperature range: 0 C to 70 C. Extended temperature range: -40 C to 85 C. Provides 1500Vrms isolation. Designed to match the leading transceiver chips. Through hole mounting. Normal Temperature Range Model number Turns ratio P:S +/-5% OCL@25C mh, Min * LL uh Max Cw/w pf, Max Pri Ohm, Max Sec. Ohm, Max Schematic Primary pins :1:1 (2CT) & CT:3CT : CT: : :1: / (2,3 sh.) :1: / (2,3 sh.) :1: / (2,3 sh.) CT:2CT :2CT :2CT :4CT :1.14CT :1.15CT :1: CT:2CT :2.3CT :1.36CT CT:1CT Extended Temperature Range Model number Turns ratio P:S +/-5% OCL@25C mh, Min * LL uh Max Cw/w pf, Max Pri Ohm, Max Sec. Ohm, Max Schematic Primary pins : :1.15CT CT:2CT CT:1CT Measured criteria: 0.1V / 10 KHz. 13
14 Surface Mount Toroids 518 series utilizes an iron powder core; ideal for frequency applications up to 100 khz. 618 series utilizes a Kool Mu core; minimizing core losses and temperature rise at higher frequencies of khz. Tape and reel packaging. Listed are standard designs. Custom designs are available in this package. 518 Series Toroids With Iron Powder Cores and 01 Case Size PARALLEL OPEN CIRCUIT MINIMUM OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC FULL LOAD +/-20% RESISTANCE +/-20% H H A dc Ohms H H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 518-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M Series Toroids With Kool Mu Cores and 01 Case Size PARALLEL OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC +/-20% RESISTANCE H H A dc Ohms OPEN CIRCUIT +/-20% H MINIMUM FULL LOAD H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 618-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M SAME AS ABOVE Kool Mu is a registered trade mark of Magnetics, Inc. 14
15 Surface Mount Toroids 518 series utilizes an iron powder core; ideal for frequency applications up to 100 khz. 618 series utilizes a Kool Mu core; minimizing core losses and temperature rise at higher frequencies of khz. Tape and reel packaging. Listed are standard designs. Custom designs are available in this package. 518 Series Toroids With Iron Powder Cores and 02 Case Size PARALLEL OPEN CIRCUIT MINIMUM OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC FULL LOAD +/-20% RESISTANCE +/-20% H H A dc Ohms H H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 518-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M Series Toroids With Kool Mu Cores and 02 Case Size PARALLEL OPEN CIRCUIT FULL LOAD MAXUMUM DC +/-20% RESISTANCE H A dc Ohms MINIMUM FULL LOAD H OPEN CIRCUIT +/-20% H MINIMUM FULL LOAD H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 618-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M SAME AS ABOVE Kool Mu is a registered trade mark of Magnetics, Inc. 15
16 Surface Mount Toroids 518 series utilizes an iron powder core; ideal for frequency applications up to 100 khz. 618 series utilizes a Kool Mu core; minimizing core losses and temperature rise at higher frequencies of khz. Tape and reel packaging. Listed are standard designs. Custom designs are available in this package. 518 Series Toroids With Iron Powder Cores and 03 Case Size PARALLEL OPEN CIRCUIT MINIMUM OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC FULL LOAD +/-20% RESISTANCE +/-20% H H A dc Ohms H H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 518-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M Series Toroids With Kool Mu Cores and 03 Case Size PARALLEL OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC +/-20% RESISTANCE H H A dc Ohms OPEN CIRCUIT +/-20% H MINIMUM FULL LOAD H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 618-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M SAME AS ABOVE Kool Mu is a registered trade mark of Magnetics, Inc. 16
17 Surface Mount Toroids 518 series utilizes an iron powder core; ideal for frequency applications up to 100 khz. 618 series utilizes a Kool Mu core; minimizing core losses and temperature rise at higher frequencies of khz. Tape and reel packaging. Listed are standard designs. Custom designs are available in this package. 518 Series Toroids With Iron Powder Cores and 04 Case Size PARALLEL OPEN CIRCUIT MINIMUM OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC FULL LOAD +/-20% RESISTANCE +/-20% H H A dc Ohms H H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 518-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M Series Toroids With Kool Mu Cores and 04 Case Size PARALLEL OPEN CIRCUIT MINIMUM FULL LOAD FULL LOAD MAXUMUM DC +/-20% RESISTANCE H H A dc Ohms OPEN CIRCUIT +/-20% H MINIMUM FULL LOAD H SERIES FULL LOAD A dc MAXUMUM DC RESISTANCE Ohms CIRCUIT DIAGRAM 618-R47M R68M R0M R0M R0M R0M M M M M M M M M M M M SAME AS ABOVE Kool Mu is a registered trade mark of Magnetics, Inc. 17
18 Surface Mount Toroids 18
19 Surface Mount Power Inductors 523 SERIES SURFACE MOUNT POWER INDUCTORS 1608 Size Ferrite Bobbin/Drum core. High Current capacity. Compact dimensions. Ideal for Reflow Soldering. Tape and reel standard packaging.* Low resistance and high energy storage. Very stable inductance over current range. PART ( H) +/-20% (Ω) max. SRF (MHz) typ R0M R5M R2M R3M R7M R8M M M M M M M M M M M M M M Notes: 1. Inductance is tested at 100KHz using an HP4284A LCR meter. 2. is measured using an HP4338A Milliohm meter. 3. SRF is measured using an HP3577A Network analyzer. * Reel contains 2500 pcs on a 13 reel. 19
20 Surface Mount Power Inductors 523 SERIES SURFACE MOUNT POWER INDUCTORS 3308 Size Ferrite Bobbin/Drum core. Compact dimensions. Ideal for Reflow Soldering. Tape and reel standard packaging.* Very stable inductance over current range. PART ( H) +/-20% (Ω) max. SRF (MHz) typ M M M M M M M M M M M M M Notes: 1. Inductance is tested at 100KHz using an HP4284A LCR meter. 2. is measured using an HP4338A Milliohm meter. 3. SRF is measured using an HP3577A Network analyzer. * Reel contains 1000 pcs on a 13 reel. 20
21 Surface Mount Power Inductors 523 SERIES SURFACE MOUNT POWER INDUCTORS 3316 Size Ferrite Bobbin/Drum core. High Current capacity. Compact dimensions. Very stable inductance over current range. Ideal for Reflow Soldering. Tape and reel standard packaging.* Low resistance and high energy storage. PART ( H) +/-20% (Ω) max. SRF (MHz) typ R0M R5M R2M R3M R7M R8M M M M M M M M M M M M M M Notes: 1. Inductance is tested at 100KHz using an HP4284A LCR meter. 2. is measured using an HP4338A Milliohm meter. 3. SRF is measured using an HP3577A Network analyzer. * Reel contains 1000 pcs on a 13 reel. 21
22 Surface Mount Power Inductors 523 SERIES SURFACE MOUNT POWER INDUCTORS 3340 Size Ferrite Bobbin/Drum core. High Current capacity. Compact dimensions. Very stable inductance over current range. Ideal for Reflow Soldering. Tape and reel standard packaging.* Low resistance and high energy storage. PART ( H) +/-20% (Ω) max. SRF (MHz) typ M M M M M M M M M M M M M Notes: 1. Inductance is tested at 100KHz using an HP4284A LCR meter. 2. is measured using an HP4338A Milliohm meter 3. SRF is measured using an HP3577A Network analyzer Reel contains 225 pcs on a 13 reel. 22
23 Surface Mount Power Inductors 523 SERIES SURFACE MOUNT POWER INDUCTORS 5022 Size Ferrite Bobbin/Drum core. High Current capacity. Compact dimensions. Very stable inductance over current range. Ideal for Reflow Soldering. Tape and reel standard packaging.* Low resistance and high energy storage. PART ( H) +/-20% (Ω) max. SRF (MHz) typ R0M R2M R3M R6M M M M M M M M M M M M M M Notes: 1. Inductance is tested at 100KHz using an HP4284A LCR meter. 2. is measured using an HP4338A Milliohm meter 3. SRF is measured using an HP3577A Network analyzer * Reel contains 250 pcs on a 13 reel. 23
24 Common Mode Chokes Dielectric strength: 1250 Vrms. Built to meet UL Class B (130 C) insulation system. 1 Amp to 15 Amps. 0.3 to 125 mh. Windings Balanced within 1%. (Arms) L (mh) TYPICAL TYPICAL LEAKAGE IWC ( H) 25 C PACKAGE 1 (Arms) L (mh) TYPICAL TYPICAL LEAKAGE IWC ( H) 25 C CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC (Arms) L (mh) TYPICAL TYPICAL LEAKAGE IWC ( H) 25 C PACKAGE 2 (Arms) L (mh) TYPICAL TYPICAL LEAKAGE IWC ( H) 25 C CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC PACKAGE DIMENSIONS A B C D E F Measured criteria: 10mV / 10 KHz. 24
25 Common Mode Chokes Dielectric strength: 1250 Vrms. Built to meet UL Class B (130 C) insulation system. 1 Amp to 15 Amps. 0.3 to 125 mh. Windings Balanced within 1%. (Arms) L (mh) TYPICAL TYPICAL LEAKAGE IWC ( H) 25 C PACKAGE 3 (Arms) L (mh) TYPICAL TYPICAL LEAKAGE IWC ( H) 25 C CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC (Arms) L (mh) TYPICAL LEAKAGE ( H) TYPICAL IWC 25 C PACKAGE 4 (Arms) L (mh) TYPICAL LEAKAGE ( H) TYPICAL IWC 25 C CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC CMC PACKAGE DIMENSIONS A B C D E F Measured criteria: 10mV / 10 KHz. 25
26 Common Mode Chokes Package 1 Wide Range of currents and inductances available Amps to 4 Amps mh to 14.3 mh. Cost effective design. Low interwinding capacitance. Class B (130 C) insulation Vrms isolation between windings. 320 Series E-Core Common Mode chokes Package 1 (A rms) Lp +/- 25% (mh)* EACH WINDING * Measured criteria: 10mV / 10 KHz. 26
27 Common Mode Chokes Package 2 Wide Range of currents and inductances available Amps to 4 Amps mh to 14.3 mh. Cost effective design. Low interwinding capacitance. Class B (130 C) insulation Vrms isolation between windings. 320 Series E-Core Common Mode chokes Package 2 (A rms) Lp +/- 25% (mh)* EACH WINDING * Measured criteria: 10mV / 10 KHz. 27
28 Current Sense Transformers CSI SERIES WITHOUT PRIMARY TURN Designed for switching power supply applications. Frequency range of 20 KHz and higher. Minimum material thickness from hole I.D to coil is 0.50mm. Molded construction with through-hole for primary lead. SECONDARY TURNS MINIMUM SECONDARY mh I PEAK A CSI CSI CSI CSI-0050-CT 50 CT CSI-0100-CT 100 CT CSI-0200-CT 200 CT CSI-0300-CT 300 CT
29 Current Sense Transformers CST SERIES WITH ONE SINGLE TURN PRIMARY Single primary turn included. Designed for switching power supply applications. Transformer meets IEC950 insulation requirements Vrms primary to secondary hi-pot tested. Frequency range of 20 KHz and higher. Encapsulated construction. SECONDARY TURNS MINIMUM SECONDARY mh I PEAK A CST T CST T CST T CST TCT 50 CT CST TCT 100 CT CST TCT 200 CT CST TCT 300 CT
30 Current Sense Transformers CST SERIES WITH TWO SINGLE TURNS PRIMARIES Two individual primary turns included. Designed for switching power supply applications. Transformer meets IEC950 insulation requirements Vrms primary to secondary hi-pot tested. Frequency range of 20 KHz and higher. Encapsulated construction. SECONDARY TURNS MINIMUM SECONDARY mh I PEAK A CST T CST T CST T CST TCT 50 CT CST TCT 100 CT CST TCT 200 CT CST TCT 300 CT
31 Current SenseTransformers TR- SERIES, FOR 50/60 and 400 Hz APPLICATIONS Low Cost. 5 standard turns ratios. Vertical PCB Mounting. Minimum material thickness from hole I.D to coil is 0.80mm. Molded construction with through-hole for primary lead. SECONDARY TURNS PRIMARY AMPS (RMS) TR-3025-PC TR-5025-PC TR PC TR PC TR PC
32 Electro Technik Companies Capacitive Products Arizona Capacitors, Inc E. Drexel Road Tucson, AZ tel: fax: n Wound Film Capacitors and Electronic Filters Microwave Products Res-Net Microwave, Inc. P.O. Box Clearwater, FL tel: fax: res_sales_service@electrotechnik.com n RF/Microwave Resistors, Attenuators, Terminations Wavetronix Corp. P.O. Box Clearwater, FL tel: fax: wave_sales_service@electrotechnik.com n RF/Microwave Cable Assemblies and Semi-Rigid Coaxial Cables Magnetics Products Hytronics Corp, P.O. Box Enterprise Blvd. Largo, FL tel: fax: hy_sales_service@electrotechnik.com n Power Transformers and Power Inductors Raycom Electronics, Inc. P.O. Box Raycom Rd. Dover, PA tel: fax: Duane Goodling/Customer Service n Custom Military and Avionics Magnetics Goguen Industries 3151 East Drexel Road Tucson, AZ ttel: fax: sales@goguenindustries.com n Specialty Inductors, Transformers, and Air Coils (I-Tech) P.O. Box 18802, Clearwater, FL tel: toll free: fax: n Standard Catalog Inductors and Transformers Winatic Corp Enterprise Blvd. Largo, Fl tel: fax: win_sales_service@electrotechnik.com n Transformers and Inductors for Medical Devices and Equipment Resistive Products Tepro P.O. Box Enterprise Blvd. Largo, FL tel: fax: tep_sales_service@electrotechnik.com n Wirewound and Metal Film Resistors Vamistor P.O. Box 1260 Clearwater, FL tel: fax: tep_sales_service@electrotechnik.com n Carbon Film and RL 42 Resistors ;
CMC 14 Common Mode Chokes Series
7 Electrical Data ID Code Inductance Value at C (-/+%) Less than % performance variations versus temperature (- C / + C) Minimum impedance attenuation : Ω from khz to MHz Compact SMD package (x pins) Applied
More informationRhombus Industries Inc.
NEW! FOR '97 MAGNETIC COMPONENTS INDUCTORS, COILS & SMPS MAGNETICS PRODUCTS INCLUDE... CURRENT SENSE POWER LINE CHOKES HASH CHOKES COMMON MODE MAG AMP TOROIDS POWER INDUCTORS SWING INDUCTORS HIGH L AIR
More informationCOMPLIANT Common Mode Chokes - UU9.8 & UU10.5 Series
Document FR00 COMPLIANT Common Mode Chokes - UU9.8 & UU0.5 Series Order Code MCU 000 MCU 0002 Core Mounting Inductance mh (Min) UU9.8 Series Current Rating ma (steady state) 350 350 Leakage DC Inductance
More informationShielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
More informationECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
More informationMIL-STD 1553 Interface Transformers - DBIT x 3 S
Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x S () (-) () (-) (mh) min at khz-v DBIT S : : 0.0. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S
More informationGENERAL PURPOSE TRANSFORMERS
Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available
More informationT1/Cept/ISDN-PRI Transformers
T/Cept/ISDNPRI Transformers Dual Surface Mount, 500 Vrms, xtended & Standard Temperature Range RoHS6 Compliant (Pri:Sec ±2%) xtended Temperature Range Models OCL @ 25 C (mh MIN) RoHS peak reflow temperature
More informationAmveco Toroidal Solutions. Acme Electric s class leading toroidal magnetics is the perfect solution for the most challenging applications.
Amveco Toroidal Solutions Acme Electric s class leading toroidal magnetics is the perfect solution for the most challenging applications. AMVECO TOROIDAL SOLUTIONS Acme Electric s Amveco brand specializes
More informationThe Reliable Source... FERROPERM. Inductors. Transformers
The Reliable Source... FERROPERM for High Quality Inductors and Transformers INDUCTORS AND TRANSFORMERS from FERROPERM UK Ltd. FERROPERM offers a manufacturing capability for the production of most types
More informationCMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
More informationDRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
More informationShielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
More informationHP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
More informationLine Frequency Transformer
Line Frequency Transformer For frequencies of 50/60 Hz, specify a Frequency Transformer. Line Line Frequency Transformers are customized to meet customer requirements, and are available in various ratings.
More informationMILITARY/AEROSPACE PRODUCTS
Pulse is one of the leading manufacturers of magnetic interface transformers, data bus couplers, delay lines, ethernet transformers, and custom electronic components for Military/Aerospace applications.
More informationT1/E1/CEPT/ISDN-PRI TRANSFORMERS
/CEPT/ISDNPRI TRANSFORMERS RoHS Compliant Part Number Turns Ratio (Pri:Sec ±2%) RoHS peak reflow temperature rating 245 C Models matched to leading quad and dual T1/ E1/CEPT/ISDNPRI transceivers Crosstalk:
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationOVERVIEW: PULSE POWER MAGNETICS
Pulse offers a complete range of magnetics for both high-frequency switching and lowfrequency laminated power supply applications. The switching power magnetics include power inductors, power transformers,
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationTRANSFORMERS CHASSIS TANSFORMERS FERRITE ROD 2328 LIGHTING TRANSFORMERS 2328 TOROIDAL TRANSFORMERS 2327 TRANSFORMERS
TRANSFORMERS PULSE TRANSFORMER DAVID USE PHOTO SD0010 AUDIO TRANSFORMER CHASSIS TRANSFORMER TOROIDAL TRANSFORMER LIGHTING TRANSFORMER DAVID USE PHOTO SD0010 CHASSIS TANSFORMERS 2325-2328 FERRITE ROD 2328
More informationCommon Mode Chokes BU Series
Document 60- Common Mode Chokes BU Series These low cost, high performance choke coils are designed to virtually eliminate line conducted common mode noise. The BU9S and BU9HS families are ideal for signal
More informationWideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
More informationSELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) 1 Ripple & Noise (Max) 1 Efficiency
More informationEMI/EMC Components - Data Line Filters
The World s Most Advanced Passive Components EMI/EMC Components - Data Line Filters NZ Series Solid Chip Noise Suppressors (N608Z ~ N70Z) Multi-layered Chip Impedance Array Three-Terminal EMI Chip Filters
More informationTriplett 3444A Power Supply Modification Notes
Triplett 3444A Power Supply Modification Notes The Triplett 3444A is a superb Tube Test/Analyzer. Mutual Conductance is measured by inserting a small known AC signal on the Grid, and measuring the AC Plate
More information(TREC) Wire Wound RF Chip Inductor
Version: February 21, 2017 (TREC) Wire Wound RF Chip Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationCONTENTS 2/ /7 8/9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/ Contact Us 38
CONTENTS Market Sectors Company Profile Planar Technology Product Range Overview Size 10 MAX 1kW Size 195 MAX 1.5kW Size 225 MAX 2kW Size 20 MAX 2kW Size 50 MAX 6.5kW Size 500 MAX 10kW Size 510 MAX 10kW
More informationSELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com CRV2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationCoiltronics DRQ Series Dual winding, shielded inductors/transformers
Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM
More informationElectromagnetic Integrated Solutions
Complete line of coaxial EMI electromagnetic spectrum management solutions, from components to complex assemblies. Electromagnetic Integrated Solutions Capabilities & Certifications API Technologies has
More informationReference Design EBC iw for 12V 600mA Network Adapter Design
Reference Design EBC10011 iw1706-00 for 12V 600mA Network Adapter Design Table of Contents iw1706-00 For Network Adapter Design (AC Input 90 264V AC, Output 12V 600mA) EBC10011 1.0. Introduction...3 2.0.
More informationUTK Component CATALOGO GENERALE GENERAL CATALOGUE. High quality inductive components. Componenti induttivi alta qualità
UNI EN ISO 9001:2015 GENERAL CATALOGUE CATALOGO GENERALE UTK Component High quality inductive components Pulse transformers Low power switch mode transformers High power switch mode transformers Drive
More information(TREM) High SRFs RF Inductor
Version: March 1, 2017 Electronics Tech. (TREM) High SRFs RF Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang
More informationSMT Inductors SIMID 1812-T B82432-T. Data Sheet
SMT Inductors Data Sheet Size 1812 (EIA) or 4532 (IEC) Rated inductance 1,0 to 1000 µh Rated current 70 to 1300 ma Construction Upright ferrite drum core Laser-welded winding Flame-retardant encapsulation
More informationAbout LC Meter This is one of the most accurate and simplest LC inductance / capacitance Meters that one can find, yet one that you can easily build y
Home Electronic Store Electronic Blog Electronic Schematics Tutorials Downloads Lin Very Accurate LC Meter based on PIC16F84A IC. LC Meter Part's List: 2x 1K 2x 6.8K 1x 47K 3x 100K 1x 10K POT 2x 10pF 1x
More informationMER1 Series 1kVDC Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MER1 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationProduct Data Short Form Magnetic Components
Product Data Short Form Magnetic Components 2 Magnetic Components TT Electronics is a global provider of engineeredelectronics for performance critical applications. We have years of experience and expertise
More informationWhat is an Inductor? Token Electronics Industry Co., Ltd. Version: January 16, Web:
Version: January 16, 2017 What is an Inductor? Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City,
More informationFigure 1 Schematic. Quantity Ref.Des Description Number
1 Schematic Figure 1 Schematic. 2 Bill of Materials Numbe r Quantity Ref.Des Description Mfg Part Number 1 1 BR1 800 V, 1 A, Bridge Rectifier, SMD, DFS DF08S Diodes Inc 2 1 C1 100 nf, 275VAC, Film, X2
More information3D COIL 15x15 10mH ±5% 125 KHz SMD DROP RESISTANT TRANSPONDER 3D COIL 15.9x15.9 mm
1/7 3D COIL 15x15 10mH ±5% 125 KHz SMD DROP RESISTANT TRANSPONDER 3D COIL 15.9x15.9 mm Made by: Sergio Cobos Checked by: S. Cobos Approved by: F. Bustos Date: 20/02/12 Date: 20/02/12 Date: 12/03/2012 Signature:
More informationNXF1 Series Isolated 1W Regulated Single Output DC-DC Converters
www.murata-ps.com NXF1 Series SELECTION GUIDE FEATURES UL69 recognition pending Output regulation
More informationModel SR554 Transformer Preamplifier
Model SR554 Transformer Preamplifier Model SR554 Transformer Preamplifier 1290-D Reamwood Avenue Sunnyvale, California 94089 Phone: (408) 744-9040 Fax: (408) 744-9049 email: info@thinksrs.com www.thinksrs.com
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationUM mA, 600kHz Step-Up DC-DC Converter UM3433 SOT23-6. General Description. Rev.05 Dec /9
General Description UM3433 600mA, 600kHz Step-Up DC-DC Converter UM3433 SOT23-6 The UM3433 is synchronous rectified, fixed frequency, step-up DC/DC converter series delivering high efficiency in a low
More informationMini Wideband Transformers WBC
Document - Mini Wideband Transformers WBC Smallest wideband transformer: mm square mm high Vrms interwinding isolation, / Watt RF input power ma max current rating. Designer s Kit C contains three of each
More informationSMD FILTER TRB 50 TR 100K - 26 TRB TYPE. Outline. Product Identification Shapes : Electrical Characteristics and Dimensions (unit: mm):
SMD FITER TRB TYPE Outline These surface mount filters are speciously designed to virtually eliminate the problem of conducted EMI in data line applications. They provide both differential and common mode
More informationWest Coast Magnetics. Advancing Power Electronics FOIL WINDINGS FOR SMPS INDUCTORS AND TRANSFORMERS. Weyman Lundquist, CEO and Engineering Manager
1 West Coast Magnetics Advancing Power Electronics FOIL WINDINGS FOR SMPS INDUCTORS AND TRANSFORMERS Weyman Lundquist, CEO and Engineering Manager TYPES OF WINDINGS 2 Solid wire Lowest cost Low DC resistance
More informationCRL2 Series. Isolated 2W Single Output DC/DC Converters FEATURES PRODUCT OVERVIEW
www.murata-ps.com CRL2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationNMG Series Isolated 2W Single Output DC/DC Converters
www.murata-ps.com NMG Series SELECTION GUIDE FEATURES UL 69 recognised Efficiency from 8% Wide temperature performance at full 2 Watt load, 4 C to 85 C Industry standard pinout 1kVDC isolation Hi Pot Test
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 9W power supply using TNY267P Input: 85 265 VAC Output: 5V/0.56A, 3.3V/0.48A, 12V/100mA, -12V/15mA, -22V/100mA, Floating 4V/100mA
More informationReference Design EBC iw for 5V 1A Mini-TA Charger Design
Reference Design EBC10010 iw1700-01 for 5V 1A Mini-TA Charger Design Table of Contents iw1700-01 For Mini-TA Charger Design (AC Input 90 264V AC, Output 5V 1A) EBC10010 1.0. Introduction...3 2.0. Design
More informationNME Series Isolated 1W Single Output DC-DC Converters
www.murata-ps.com NME Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load V V ma ma Load Regulation 2 Ripple & Noise % mv p-p Typ. Max. Typ.
More informationChip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationMTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material 3.3V, 5V, 12V,
More informationH11F1M, H11F2M, H11F3M Photo FET Optocouplers
, H11F2M, H11F3M Photo FET Optocouplers Features As a remote variable resistor: 100Ω to 300MΩ 15pF shunt capacitance 100GΩ I/O isolation resistance As an analog switch: Extremely low offset voltage 60
More informationTransformers for Broadband Access
HDSL & SDSL Interface Transformers Line Interface 56kbps Modem Transformer Transformers for Broadband Access SECTION 9 Transformers for Broadband Access TALEMA PROFILE Founded in 1975, The TALEMA International
More informationReference Design EBC940. Dimmable LED Driver with iw (AC Input 90V 135V AC. , Output 30V 350mA)
Reference Design Dimmable LED Driver with iw3616-00 (AC Input 90V 135V AC Table of Contents Dimmable LED Driver with iw3616-00 1.0. Introduction...3 2.0. Design Features...3 3.0. Design Specification...4
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationdiscontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
More informationDifferential-Mode Emissions
Differential-Mode Emissions In Fig. 13-5, the primary purpose of the capacitor C F, however, is to filter the full-wave rectified ac line voltage. The filter capacitor is therefore a large-value, high-voltage
More informationdiscontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
More informationDATASHEET CUSTOMER : 승인번호 ISSUE DATA SHEET. We have approved the attached specification. Written by Checked by Approved by
CUSTOMER : 승인번호 ISSUE DATA SHEET Product Name : Part No : Revision Date : 2012/11/23 Customer Code : We have approved the attached specification. Written by Checked by Approved by CUSTOMER Signature R
More informationPlanar Transformer Prototyping Kit. Designer s Kit C356
Planar Transformer Prototyping Kit Designer s Kit C Contents Introduction... Kit Contents... Part Details... Core... Primary Boards... Secondary Stamps... Auxiliary Boards... Pins and Insulators... Designing
More informationEnd Fed Half Wave Antenna Coupler
End Fed Half Wave Antenna Coupler The finished End Fed Half Wave antenna coupler. Centre fed half wave dipoles make great, simple and effective antennas for the HF bands. Sometimes however, the centre
More informationReference Design EBC941. Dimmable LED Driver with iw (AC input 180V 264V AC. , Output 30V 350mA)
Reference Design Dimmable LED Driver with iw3616-01 (AC input 180V 264V AC Table of Contents Dimmable LED Driver with iw3616-01 1.0. Introduction...3 2.0. Design Features...3 3.0. Design Specification...4
More informationFMSA/FMGA EMI Input Filters
FMSA/FMGA EMI Filters FEATURES 55 C to +125 C operation 50 db min. attenuation at 500 khz differential mode 45 db min. attenuation at 5MHz common mode Compliant to MIL-STD-461C, CE03 Compatible with MIL-STD-704E
More informationCOMPONENTS MODULES CORES
COMPONENTS MODULES CORES 211 SUMIDA Components & Modules GmbH Dr. Hans-Vogt-Platz 1 D-9413 Obernzell Phone: ++49/85 91/937- Fax: ++49/85 91/937-3 E-Mail: contact@sumida-eu.com Internet: www.sumida-eu.com
More informationReference Design EBC iw for 5V 1A Small-Size Adapter Design
Reference Design EBC10003 iw1677-00 for 5V 1A Small-Size Adapter Design Table of Contents iw1677-00 For Small-Size Adapter Design (AC Input 90 264V AC, Output 5V 1A) EBC10003 1.0. Introduction...3 2.0.
More information3-PHASE EMI/RFI FILTERS
3-PHASE EMI/RFI FILTERS 3SUP-AH Series 250VAC Fax Back Document #1319 3SUP-A H-ER-4 Three Phase (3 φ) Filter Delta Rated 10 to 250 Ampere at 250VAC Normal and Common mode attenuation Low forward voltage
More informationInductor Glossary. Token Electronics Industry Co., Ltd. Version: January 16, Web:
Version: January 16, 2017 Inductor Glossary Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City, Taiwan,
More informationVoltech AT Series Automatic Transfomer Testers. Extended Measurement Capability.
www.voltech.com 239-437-0494 sales@voltech.com August 2011 Voltech AT Series Automatic Transfomer Testers Extended Measurement Capability Introduction.... 2 Essential Capability... 3 Extended Capability...
More informationFLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum
GE Critical Power FLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum RoHS Compliant The FLTR100V10 Filter Module is designed to reduce the conducted common-mode and differential-mode noise on
More informationTitle. Description. Date 16 th August, Revision 1.1 RD W Telecoms DC/DC PSU Input : 37Vdc to 60Vdc Output : 32V/10A
Title Description RD008 320W Telecoms DC/DC PSU Input : 37Vdc to 60Vdc Output : 32V/10A Date 16 th August, 2007 Revision 1.1 WWW.ConverterTechnology.CO.UK RD008 320W Push-Pull Converter August 16, 2007
More informationUM :XX. 6 Line ESD/EMI Protection for Color LCD Interfaces UM6401 DFN General Description
6 Line ESD/EMI Protection for Color LCD Interfaces DFN12 3.0 1.6 General Description The is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide
More informationMER1 Series 1kVDC Isolated 1W Single Output DC-DC Converters
www.murata-ps.com MER1 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationUniversal AC Input, 5 Volt Output, 10 Watt Power Supply
Design Note DN05064/D Universal AC Input, 5 Volt Output, 10 Watt Power Supply Device Application Input Voltage Output Power Topology I/O Isolation NCP1124 NCP431 Smart Meters, Electric Meters, White Goods
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. V V ma ma. Voltage range
www.murata-ps.com SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 0.75W load
More informationCATALOG including...
2002 CATALOG including... http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available on our website. 1 Advanced Instruments to Meet International
More informationCurrent Sense Transformers & Inductors
Mains /60Hz Current Transformers Current Ratings to Amps KHz to 0KHz Current Sense Inductors & Transformers Fully RoHS & REACH Compliant SECTION Current Sense Transformers & Inductors Current Sense Transformers
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com MEV1 Series SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationSupertex inc. HV9971DB1. Isolated, Constant Current HV9971 LED Driver Demoboard. Board Layout and Connection Diagram.
Isolated, Constant Current HV9971 LED Driver Demoboard Board Layout and Connection Diagram Terminals for Monitoring Bus Voltage - + V AC = + 180-265VAC = 18-24V - I OUT = 330mA Connections 1. Input Voltage:
More informationThe 15 meter section was moved
After 2 years or so making various adjustments to the original LPF filter configuration, and noting some of the changes which could be made to the board to make it easier to construct, tune, and reconfigure
More information25 Watt DC/DC converter using integrated Planar Magnetics
technical note 25 Watt DC/DC converter using integrated Planar Magnetics Philips Components 25 Watt DC/DC converter using integrated Planar Magnetics Contents Introduction 2 Converter description 3 Converter
More informationSignal Transformer. Standard and Custom Power Transformers
Standard and Custom Power Transformers The Signal Way of Doing Business (Often imitated, but NEVER equalled) At, we are committed to providing the highest grade magnetics for customers who demand total
More informationICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
More informationSMALLER-FASTER- OW R CO$T
SMALLER-FASTER- OW R CO$T Magnetic Materials for Today s High-Power Fast-Paced Designs Donna Kepcia Technical Sales Manager Magnetics DISCUSSION OVERVIEW Semiconductor Materials, SiC, Silicon Carbide &
More informationINTERACTIVE. data book INDUCTORS AND TRANSFORMERS
V I S H A Y I N T E R T E C H N O L O G Y, I N C. INTERACTIVE data book INDUCTORS AND TRANSFORMERS vishay AZTRONIC vsd-db009-00 Notes:. To navigate: a) Click on the Vishay logo on any datasheet to go to
More informationRF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
More informationShielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Efficiency up to 88% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material
More informationDimmable LED Driver with iw3614. (Input 230Vac Output 24V350mA)
Dimmable LED Driver with iw3614 (Input 230Vac Output 24V350mA) 1. Design Purpose and Feature Isolated ac-dc offline, Input 230Vac, Output 7 LEDs 350mA Intelligent wall dimmer detections - Leading-edge
More informationGENERAL PURPOSE SOLID STATE RELAY 8PIN DIP 2-CHANNEL TYPE FORM A SSR
Schematic Features Compact 8-pin DIP size Applicable for 2 Form A use as well as two independent 1Form A use Controls low-level analog signals High sensitivity and high speed response Low-level off state
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More information