MIL-STD 1553 Interface Transformers - DBIT x 3 S
|
|
|
- Derrick White
- 6 years ago
- Views:
Transcription
1 Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x S () (-) () (-) (mh) min at khz-v DBIT S : : 0.0. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S :. :... Lp (-) As per MIL-STD A & B data transmission, MHz operation ECSS-Q-0-0 Open-circuit impedance greater than k ( k typical value) from KHz to MHz Frequency range KHz to MHz Operating temperature range : - C to + C eight : to. grams Common mode rejection : db min. Dielectric withstanding voltage : 00 Vrms. Insulation resistance : 000 M min. tolerance ratio ± %. DBIT # S DBIT # S Range Transceiver type Case height S SMD Typical Dimensions (mm, top view)..0 PCB Layout (suggested) MAX 0.. MAX 0. Individually packed : parts on layers. Tape and Reel: 00 units per reel of diameter 0 mm P P: 0 :.0 :.0 DBIT x S Tel : + (0) 9 Specifications may change without prior notice - Revised 0/09
2 ...RF and Data magnetics... Electrical Data ( C ) Turns ratio (±%) P: S (-)() Typical Dimensions (mm, top view) MIL-STD Interface Transformers - DBIT xx S Miniature package, less board space As per MIL-STD A & B data transmission, MHz operation ECSS-Q-0-0 Frequency range KHz to MHz Operating temperature range : - C to + C eight :. grams (-)() (-)() OUTPUT RISE TIME ns (MAX) Impedance (MIN) khz to 9 khz Impedance (MIN) 0 khz to MHz DBIT 9 S :. A ns (-) 000 (-) 000 DBIT 0 S :.0 A ns (-) 000 (-) 000 DBIT 0 S. : A ns (-) 000 (-) 000 DBIT S. : A ns (-) 000 (-) 00 DBIT 90 S :.0 B ns (-) 000 (-) 000 DBIT S :.9 B ns (-) 000 (-) 000 DBIT S. : B ns (-) 000 (-) 000 DBIT S.00 : B ns (-) 000 (-) 00 DBIT ## S DBIT ## S Range Code Turn Ratio Case height. S SMD Common mode rejection : db min. Dielectric withstanding voltage : 00 Vrms. Insulation resistance : 000 M min. PCB Layout (suggested) 0. ± MAX 0. A B. ± 0.0 < 0 µm Individually packed : parts on layers. Tape and Reel: 00 units per reel of diameter 0 mm F P F:. P:. :.0 :.0 DBIT xx S Tel : + (0) 9 Specifications may change without prior notice - Revised 0/09
3 Electrical Data ( C ) - : - - : - Typical Dimensions (mm, top view) MIL-STD Interface Transformers - DBIT x S As per MIL-STD A & B data transmission, MHz operation ECSS-Q-0-0 Open-circuit impedance greater than k ( k typical value) from KHz to MHz Frequency range KHz to MHz Operating temperature range : - C to + C eight : to. grams () (-) () (-) (mh) min at khz-v DBIT S. : :.. Lp (-) DBIT S : : Lp (-) DBIT S. :. :. Lp (-) DBIT S :. :.9.. Lp (-) DBIT S. :. :. Lp (-) DBIT S :. :... Lp (-) DBIT # S DBIT # S Range Part to Case height S SMD Common mode rejection : db min. Dielectric withstanding voltage : 00 Vrms. Insulation resistance : 000 M min. tolerance ratio ± %..0 PCB Layout (suggested) MAX 0.. MAX 0. Individually packed : parts on layers. Tape and Reel: 00 units per reel of diameter 0 mm P P: 0 :.0 :.0 DBIT x S Tel : + (0) 9 Specifications may change without prior notice - Revised 0/0
4 ...RF and Data magnetics... Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x x As per MIL-STD A & B data transmission, MHz operation ECSS-Q-0-0 Open-circuit impedance greater than k ( k typical value) from KHz to MHz Frequency range KHz to MHz Operating temperature range : - C to + C eight : < grams () (-) () (-) (mh) min at khz-v DBIT x. : :. Lp (-) DBIT x : : 00. Lp (-) DBIT x. :. : Lp (-) DBIT x :. :.9. Lp (-) DBIT x. :. : Lp (-) DBIT x. :. : Lp (-) DBIT x :. :.. Lp (-) DBIT # x DBIT # x Range Part to Case height x = P Pins x = P0 Pins (0 mm) x = S SMD Common mode rejection : db min. Dielectric withstanding voltage : 00 Vrms. Insulation resistance : 000 M min. tolerance ratio ± %..0 PCB Layout (suggested, DBIT xs)... DBITxP DBITxP0 Bottom view DBITxS.0.0. MAX.0. Pin Ø 0. Electrolytic tin plating ± ±0.. MAX.0 ±0.. Pin Ø 0.0 Electrolytic tin plating.0 MAX MAX MAX Individually packed : parts on layers. Tape and Reel (DBIT xs): 00 units per reel of diameter 0 mm P P: 0 :.0 :.0 DBIT x x Tel : + (0) 9 Specifications may change without prior notice - Revised 0/09
5 Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x00 () (-) () (-) As per MIL-STD A & B data transmission, MHz operation aveform integrity : Vptop level at 0 KHz - droop < 0 % into the lowest turn s wdg Encapsulated in accordance with MIL-T-0 (DAP box) Open-circuit impedance greater than k from KHz to MHz Operating temperature range : - 0 C to + C eight : to. grams (mh) min at khz-v DBIT P00 :. :.9. Lp (-). DBIT x00 DBIT P00 Range Code turn ratio Case height x = P for Pin through hole x = S for SMD Common mode rejection : db min. Dielectric withstanding voltage : 00 Vrms. Insulation resistance : 000 M min - 00 VDC tolerance ratio ± %. PCB Layout (suggested, DBIT S00) DBIT P00 Bottom view. DBIT S DBIT P00. Pin Ø 0. Electrolytic tin plating. 0. ± MAX Pin section: 0.0 x 0.0 thick. ± 0.0 < 0 µm Individually packed : parts on layers. Tape and Reel (DBIT S00): 00 units per reel of diameter 0 mm P P: :.0 :.0 Tel : + (0) 9 Specifications may change without prior notice - Revised 0/09
6 ...RF and Data magnetics... SBIT #.S SBIT #. S Range Part to Case height. S SMD PCB Layout (suggested).0 Dual staked MIL-STD Interface Transformers - SBIT x.s Electrical Data ( C ).0 Parameter Unit SBIT.S SBIT.S SBIT.S SBIT.S SBIT.S SBIT.S SBIT.S SBIT.S Frequency Response Operating Range khz to 000 to 000 to 000 to 000 to 000 to 000 to 000 to 000 Common-Mode Rejection (min) db Electrical Requirements Terminal inding Resistance Rdc - (max) - (max) Interwinding Capacitance (max) pf inding Inductance LM (min) LL (max) mh µh Peak-to-Peak Voltage (max) Terminals - primary Vpp Droop (max) ms Pulse Duration 0 Load Across Terminals - % Decay Time (max) 0 Load Across Terminals - ns Backswing 0 Load Across Terminals - % none none none none none none none none Turns Ratios Terminals - : - - : : : SBIT x.s YY : : 0.0 As per MIL-STD B data transmission, MHz operation ECSS-Q-0-0 Open-circuit impedance greater than k ( k typical value) from KHz to MHz Frequency range KHz to MHz Operating temperature range : - C to + C eight : < grams.0 :. : () () () :. :. () () () () () :. :.9 Interwinding insulation : 00 Vrms - 00 Hz. Flammability compliance : UL9V0.. ±0.0.0 :. :.. :. : 0.0 Top view 9 ±0.0/square Pin section: 0. x 0. (width x thick) :. : ±0.0 //00.µm Tel : + (0) 9 Specifications may change without prior notice - Revised 0/09
7 Electrical Data ( C ) As per MIL-STD B data transmission, MHz operation ECSS-Q-0-0, MILT 0 Open-circuit impedance greater than k ( k typical value) from KHz to MHz Frequency range KHz to MHz Operating temperature range : - C to + C eight : < grams Parameter Unit SBIT.P SBIT.P SBIT.P SBIT.P SBIT.P SBIT.P Frequency Response Operating Range khz to 000 to 000 to 000 to 000 to 000 to 000 Common-Mode Rejection (min) db Electrical Requirements Terminal inding Resistance Rdc - (max) - (max) Interwinding Capacitance (max) pf inding Inductance LM (min) (-) LL (max) mh µh (-).0.0 (-) Turns Ratios Terminals - : - - : - Dual staked MIL-STD Interface Transformers - SBIT x.p. : : : : :. : :. :.9. :. : :. :. SBIT #.P SBIT #. P Range Part to except and Case height. P pins through hole Interwinding insulation : 00 Vrms - 00 Hz. Flammability compliance : UL9V0 PCB Layout (suggested) () pitch. () ().0 mm ± mm ± 0.0 () () SBIT x.p YY () () ().0 ± 0.0. ± ± 0.0. ± 0.0 Tel : + (0) 9 Specifications may change without prior notice - Revised /0
CMC 14 Common Mode Chokes Series
7 Electrical Data ID Code Inductance Value at C (-/+%) Less than % performance variations versus temperature (- C / + C) Minimum impedance attenuation : Ω from khz to MHz Compact SMD package (x pins) Applied
Surface Mount Wideband RF
Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)
CMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
I-TECH INDUCTIVE TECHNOLOGIES, INC.
INDUCTIVE TECHNOLOGIES, INC. n Toroidal and Pot Core Inductors n Pot Core Flyback Transformers n Drum Core Power Inductors n Surface Mount Power Inductors n Current Sense Transformers n T1/CEPT/ISDN Primary
MILITARY/AEROSPACE PRODUCTS
Pulse is one of the leading manufacturers of magnetic interface transformers, data bus couplers, delay lines, ethernet transformers, and custom electronic components for Military/Aerospace applications.
Wideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
MTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material 3.3V, 5V, 12V,
Buried Broadband Capacitors How To Order
Quick Select by Application and Resonant Free Bandwidth Size Resonant Free Bandwidth** Typical Insertion Loss (S21)*** 2 Cap Values in Parallel (pf) Temp. Coeff. Working VDC FIT Calc. using cont. op. temp.
Customer P/N: UDE P/N: GDC-1U2AVN13. Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green Spec No. GDC0013-00 Update Date 2015/7/7 Revision C Approved Checked
Not for new design. Use new F611-F612 Series.
Loose All dimensions are in mm. Not for new design. Use new F611-F612 Series. Taped Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications
TRANSFORMERS CHASSIS TANSFORMERS FERRITE ROD 2328 LIGHTING TRANSFORMERS 2328 TOROIDAL TRANSFORMERS 2327 TRANSFORMERS
TRANSFORMERS PULSE TRANSFORMER DAVID USE PHOTO SD0010 AUDIO TRANSFORMER CHASSIS TRANSFORMER TOROIDAL TRANSFORMER LIGHTING TRANSFORMER DAVID USE PHOTO SD0010 CHASSIS TANSFORMERS 2325-2328 FERRITE ROD 2328
MAXIMUM RATINGS Note Parameter Conditions/comments Value Unit
The CT2 Audio Volume Controls are high quality stepped 24-position attenuators. Designed for maximum sonic quality, accuracy and reliability. This makes them equally suited for audiophile and professional
Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features NF = 0.95 db @ 900MHz at RF connectors of Demo board Gain = 20.5 db @ 900 MHz OIP3 = 30.0 dbm @ 1900MHz Output P1 db = 17.5 dbm @ 900MHz 5V/27mA, MTTF > 100 Years, MSL 1, Class 0 Lead-free/RoHS-compliant
APPROVAL SHEET BEIJING ZHONGXUN SIFANG SCIENCE & TECHNOLOGY CO.,LTD. Please return this copy as a certification of your approval TO:
APPROVAL SHEET TO: Approval Specification Customer s Approval Certificate Please return this copy as a certification of your approval Part No.: Checked & Approved by: Customer s Part No.: Date: BEIJING
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
Typical Performance 1. IS-95C ACPR dbm WCDMA ACLR dbm
Device Features OIP3 = 45.0 dbm @ 1900 MHz Gain = 15.0 db @ 1900 MHz Output P1 db = 27.5 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package
SELECTION GUIDE. Nominal Input Voltage. Output Voltage
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Efficiency up to 88% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material
RH2-ZZ-0003 USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area : 30μ'' Min. Gold LED:Without LED Approved Spec No. Update Date Revision RH217011-00 2017/6/7 A Checked
DATASHEET CUSTOMER : 승인번호 ISSUE DATA SHEET. We have approved the attached specification. Written by Checked by Approved by
CUSTOMER : 승인번호 ISSUE DATA SHEET Product Name : Part No : Revision Date : 2012/11/23 Customer Code : We have approved the attached specification. Written by Checked by Approved by CUSTOMER Signature R
Preliminary Datasheet
Device Features This can be operated at Vd of 3.0V N.F = 0.78 db @ 1850MHz at Demo board 31.5 dbm Output IP3 at 0dBm/tone at 1850MHz 15.6 db Gain at 1850MHz 17.7 dbm P1dB at 1850 MHz Lead-free/Green/RoHS
AC and Pulse Film Foil Capacitors KP Radial Potted Type
KP 1830 AC and Pulse Film Foil Capacitors L max. W max. Marking FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel 0.5 H max. Material categorization: for definitions of compliance
Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips. Three Terminal Chips
Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability
Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features OIP3 = 43.0 dbm @ 900 MHz Gain = 20.0 db @ 900 MHz Output P1 db = 24.5 dbm @ 900 MHz 50 Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Product Description BeRex s BT09AG is a
Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features OIP3 = 41.0 dbm @ 1900 MHz Gain = 15.5 db @ 1900 MHz Output P1 db = 25.5 dbm @ 1900 MHz 50 Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Product Description BeRex s BT09VG is
Terminals: Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026 TCDU 1JW TCDU 1KW. 1.0 A See Fig A. 50 µa TA=125 C.
1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) 1DW 1MW 1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) Features Qualified to AEC-Q101 standards for high reliability
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
Encapsulated Power Supply
0 Watt Features AC/DC Power Modules PCB Mounting or Chassis Mounting with Screw Terminals Fully encapsulated Plastic Case Single, Dual and Triple Output Models Universal Input 8- VAC, 7-0 Hz High Efficiency
ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Eunice Joyce Research and Development Department Danny Jack Benny Engineering Department
MTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Hi Pot Test Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 69 recognised 3.3V, 5V, 12V,
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
SELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com CRV2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
2 - NMF SERIES. Isolated 1W Regulated Single Output. features. pin connections. description
features Output Regulation
GENERAL PURPOSE TRANSFORMERS
Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available
Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368
RH2-ZZ-0002 USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow Approved Spec No. Update Date Revision RH217007-00 2017/4/12 A
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
For more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
ESDARF02-1BU2CK. Single-line bidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line bidirectional ESD protection for high speed interface Features Datasheet production data Bidirectional device Extra low diode capacitance: 0.2 pf Low leakage current 0201 SMD package size compatible
SMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
Customer P/N: UDE P/N: Description: RUP-ZZ-0073 RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T. LED:L-Yellow; R-Green/Orange
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T Contact Area : 30μ'' Min. Gold LED:L-Yellow; R-Green/Orange Approved Spec No. Update Date Revision RUP17083-00
Shielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
Cal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
EMC Components. RF Chokes High Current B82432-H. Data Book Supplement
EMC Components RF Chokes High Current B82432-H Data Book Supplement SIMID 03 (Siemens Miniature Inductors) Rated inductance 1,0 bis 330 µh Rated current 0,11 to 1,10 A Construction Size as per EIA standard:
Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
PowerDI5 10 ± 1. PowerDI5
Mechanical Data Case: PowerDI 5 Case Material: Molded Plastic, Green Molding Compound. UL Flammability Classification Rating 94V-0 Terminals: Finish Matte Tin Plated Leads. Solderable per MIL- STD-0, Method
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Features Excellent VSWR, 1.1:1 passband Small size Temperature stable LTCC construction
Ceramic Bandpass Filter 5Ω Maximum Ratings Operating Temperature Storage Temperature 15 to 16 MHz -55 o C to 1 o C -55 o C to 1 o C RF Power Input* 1.5W at 25 o C *Passband rating, derate linearly to.25w
Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion
Radial Box Metallized Polyester Capacitors for Automatic Insertion Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation
POWER INDUCTORS, MOULDED, SMD BASED ON SERIES SESI. ESCC Detail Specification No. 3201/009
No. 4001/026 PAGE 1 ISSUE 5 Page 1 of 18 POWER INDUCTORS, MOULDED, SMD BASED ON SERIES SESI ESCC Detail Specification Issue 14 July 2018 Document Custodian: European Space Agency see https://escies.org
GD1-MA-0005 RJ45 1X1 Tab Down Through Hole 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 50μ'' Min. Gold LED:L-Yellow/Green; R-Green 100% RoHS material,without exemption Approved Spec No. Update
NXF1 Series Isolated 1W Regulated Single Output DC-DC Converters
www.murata-ps.com NXF1 Series SELECTION GUIDE FEATURES UL69 recognition pending Output regulation
1SMA4728A SZ1330A. Features. Mechanical Data. Maximum A =25 C unless otherwise specified 1.0W SURFACE MOUNT ZENER DIODE
W SURFACE MOUNT ZENER DIODE Pb Features Glass Passivated Die Construction W Power Dissipation B V 3V Nominal Zener Voltage % Standard Vz Tolerance D Low Inductance A For Use in Voltage Regulator or Reference
CRL2 Series. Isolated 2W Single Output DC/DC Converters FEATURES PRODUCT OVERVIEW
www.murata-ps.com CRL2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
RF & MICROWAVE CAPACITORS LASER TRIM CERAMIC CHIP CAPACITORS TEMEX. Multilayer ceramic Porcelain - Lasertrim. Applications.
LASER TRIM CERAMIC CHIP CAPACITORS Applications Laser-Trim tuning capacitors are laser adjustable monolithic ceramic surface mount devices for precise functional tuning of R.F. circuits. Laser-Trim have
RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES
RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES The RJmag is a family of modular jacks with integrated Ethernet Magnetics. The RJmag is available with integrated common mode chokes, isolation
Multilayer Ceramic Chip Capacitors
NMC-T Low rofile Series FEATURES X7R, X5R AND Y5V DIELECTRICS HIGH CAACITANCE & LO ROFILE RoHS COMLIANT SAC SOLDER COMATIBLE RoHS Compliant Includes all homogeneous materials *See art Number System for
RF Components. Since 2003
RF Components Pulse offers a comprehensive line of RF magnetic components for use in CATV/ Hybrid Fiber Coax applications for set-top boxes and gateway devices, for TELCO TV in gateway devices, and FTTP
Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe Spec No. Update Date Revision RTK16036-00
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
Low clamping and low capacitance bidirectional single line ESD protection
Low clamping and low capacitance bidirectional single line ESD protection Datasheet - production data Description The ESDAL5-1BF4 is a bidirectional single line TVS diode designed to protect the data line
FMD EMI Input Filters
Features Attenuation to 50 db at 500 khz Operating temperature -55 to +125 C Nominal 28 V input, 0 to 50 V operation Transient rating to 100 V for 100 ms Up to 7 A throughput current Compliant to MIL-STD-461C,
TN008. PCB Design Guidelines for 2x2 LGA Sensors. Introduction. 2x2 LGA Package Marking
PCB Design Guidelines for 2x2 LGA Sensors Introduction This technical note is intended to provide information about Kionix s 2 x 2 mm LGA packages and guidelines for developing PCB land pattern layouts.
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
Data Sheet. ACMD-6003 UMTS Band 3 Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-63 UMTS Band 3 Duplexer Data Sheet Description The Avago ACMD-63 is a highly miniaturized duplexer designed for use in UMTS Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data terminals.
VSWR (:1) Frequency (MHz)
INSERTION LOSS (db) Ceramic Bandpass Filter 50Ω Applications Harmonic Rejection Transmitters / receivers PCS 1893 to 1920 MHz Features Small size (0.126 x0.063 x0.051 ) Temperature stable Hermetically
Operating Temperature -40 C to +85 C Storage Temperature* -55 C to +100 C RF Power Input** 0.5W at 25 C
INSERTION LOSS (db) Ceramic Bandpass Filter 50Ω Applications Harmonic Rejection Transmitters / Receivers WiFi / WLAN 5150 to 5990 MHz Features Low loss
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications Overview The R79 Series is constructed of metallized
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
ESDARF03-1BF3. Ultralow capacitance ESD protection for antenna. Features. Applications. Description. Benefits. Complies with the following standards
Ultralow capacitance ESD protection for antenna Features ultralow diode capacitance 0.6 pf Single line, protected against 15 kv ESD breakdown voltage V BR = 6.0 V min. Flip Chip 400 µm pitch, lead-free
Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
Packaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
Additional parameters Parameter Min Typ Max. Units Condition Weight 1 g
Typical Applications Base Stations Test + Measurement Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output range Standard frequencies 1 MHz 185 MHz 1; 25;
Metallized Polycarbonate film capacitors MKC 344
MKC RADIAL POTTED CAPACITORS PITCH 10/15/22.5/27.5 mm handbook, full pagewidth P = 10 mm P = 15 mm P = 22.5 to 27.5 mm DR931980 Fig.1 Simplified outlines. FEATURES 10 to 27.5 mm lead pitch Small dimensions
Data Sheet. ACMD-7612 Miniature UMTS Band I Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-7612 Miniature UMTS Band I Duplexer Data Sheet Description The Avago ACMD-7612 is a miniature duplexer designed for use in UMTS Band I handsets. Maximum Insertion Loss in the channel is only 1.5 db,
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
B-2200/2300/3200 SERIES
A Subsidiary of Data Device Corporation 0 Orville Drive, Bohemia, NY -9 Phone: () -9; Fax: () 9 Web site: www.bttc-beta.com B-00/00/00 SERIES MIL-STD- TRANSFORMERS FULLY QUALIFIED TO DESC SPECIFICATION
Surface Mount EMI Filters
Surface Mount EMI Filters our family of surface mount filters is designed to provide a range of high performance EMI filtering options with a minimal PCB footprint Three Terminal Chips offer superior ability
P2880. ISDN S o INTERFACE TRANSFORMER PRODUCT DATA SHEET
PRODUCT DATA SHEET ISDN S o INTERFACE TRANSFORMER Features Ultralow profile, 7mm Excellent pulse shape IEC 950, EN 0950 and EN 4003 certified CSA NRTL/C Certificate of Compliance BABT Certificate of Recognition
SELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) 1 Ripple & Noise (Max) 1 Efficiency
NMTTLD6S5MC Digital Isolator DC-DC
www.murata-ps.com 6V Isolated DC-DC Power Supply 6V 0V 5V Regulator 0V 5V regulated 5V 0V -6V -6V FEATURES UL60950 recognised for 250Vrms basic insulation ANSI/AAMI ES60601-1, 1 MOOP recognised RoHS compliant
Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
Customer P/N: UDE P/N: Description: GDA-MA-0001 RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow 100% RoHS material,without exemption PoE 60W Approved Spec No.
Ordercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
50 ohm nominal input / conjugate match balun to SPIRIT1 434 MHz, with integrated harmonic filter. Digital interface
50 ohm nominal input / conjugate match balun to SPIRIT1 434 MHz, with integrated harmonic filter Datasheet - production data Figure 1: Pin coordinates (top view) Flip-Chip (6 bumps) package Features 50
Interference Suppression Film Capacitor - Class X2 Axial MKT 253 V AC - Continuous Across the Line
Interference Suppression Film Capacitor - Class X2 Axial MKT 253 V AC - Continuous Across the Line FEATURES Axial mounting Low building height Material categorization: for definitions of compliance please
COMPLIANT Common Mode Chokes - UU9.8 & UU10.5 Series
Document FR00 COMPLIANT Common Mode Chokes - UU9.8 & UU0.5 Series Order Code MCU 000 MCU 0002 Core Mounting Inductance mh (Min) UU9.8 Series Current Rating ma (steady state) 350 350 Leakage DC Inductance
MPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
3 OIP3 _ measured with two tones at an output of 9dBm per tone separated by 1 MHz.
Device Features OIP3 = 36.9dBm @ 950 MHz Gain = 17.1 db @ 950 MHz Output P1 = 19.5 dbm @950 MHz CTB = 80.0 dbc @ 300MHz CTO = 64.0 dbc @ 300MHz Patented temperature compensation Lead-free/RoHS-compliant
IC - S O Single Interface Transformer Selection Guide
- S O Single Interface Transformer Selection Guide Talema manufactures a wide range of transformers for all S O ISDN applications. complete listing of transceiver s with recommended Talema transformers
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on