SMD High Frequency Power Inductor. Designed for Utility Regulator Applications

Size: px
Start display at page:

Download "SMD High Frequency Power Inductor. Designed for Utility Regulator Applications"

Transcription

1 FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to 1C Robust SMD package capable of handling the most aggressive SMT assembly process RoHS compliant version available APPLICATIONS Powering Utility Regulator functions such as input/output (I/O), memory and application-specific integrated circuit (ASICs). Server, Desktop, PDA, Graphics cards, Notebook computers, DDR, telecom switches and routers DC-DC converters, Battery powered devices, high current power supplies High Current NPUs in networking equipment Point-of-load Modules DCR sensing V in Control IC Vout + Phase IC Output Inductor Vout - Additional Phases Typical Multi-Phase Application Circuit for a Buck Converter 1 of 6 2/9

2 PACKAGE.197 [5.] MAX SCHEMATIC [5.] MAX R11 Note: "Classic" parts are marked with the letter P followed by the suffix, and "RoHS" compliant parts are marked with the letter R followed by the suffix. 2 SUGGESTED PCB LAYOUT.189 [4.8] 2 PLS.114 [2.9].28 [.7].15 [3.8] PART OUTLINE.118 [3.] MAX.47 [1.2].55 [1.4].5[.13] 3 PLS.22±.6 [.55±.15].67 [1.7].161 [4.1] Dimensions: Inches [mm]. Tolerances: +/-.5" [,13mm] unless otherwise noted Drawing NOT to scale ELECTRICAL o C (unless otherwise noted) Part Number Inductance Irated 4 Irated 1 Adc 4 MAX Saturation Current 2 Temp. Rise Current 3 Temp. Rise Factor 5 Classic RoHS nh nh ADC mohm ADC ADC ± 1% MIN MAX TYP MAX -4 O C O C 1 O C MAX A B 59P PR P PR P PR P PR P PR P PR Notes: Add an "R" to the part number after "P" for the RoHS compliant version (i.e. 59PR21-11 is the RoHS compliant version of 59P21-11). 1. The rated current is the saturation o C. 2. The I(Saturation) is the current at which the inductance drops by 2% maximum of its value at ADC. This current is measured at the stated ambient environment and by applying a short duration pulse current to the component, minimizing the self-heating effects. 3. The I (Temp. Rise) is the current at which the temperature of the part increases by a maximum of 5 o C. This test is performed with the part mounted on a PCB with." wide,.4" thick copper traces and applying the DC current for a minimum of 3 minutes. 4. Inductance is measured at 1 KHz and 1. Vrms. 5. Temperature Rise can be estimated using the following formulas: Trise ( o C) = Core Loss + DCR Loss B DCR Loss (mw) = Idc 2 + I x TYP DCR (mohms) Core Loss (mw) =.224 x (F) 1.84 x (Temp. Rise factor x I) 2.2 IDC = DC output current (ADC) I = Delta I across the inductor (Amps) F = Switching frequency (khz) 2 of 6 2/9

3 59P21-11 Inductance vs. o C 59P21-21 Inductance vs. o C P Inductance vs. o C 59P Inductance vs. o C P Inductance vs. o C 59P21-12 Inductance vs. o C of 6 2/9

4 59P21-11 Temp. Rise vs. Idc 59P21-21 Temp. Rise vs. Idc P Temp. Rise vs. Idc P Temp. Rise vs. Idc P Temp. Rise vs. Idc P21-12 Temp. Rise vs. Idc of 6 2/9

5 59P21-11 Rdc vs. Temp. Rise 59P21-21 Rdc vs. Temp. Rise Resistance (Ohms) Resistance (Ohms) P Rdc vs. Temp. Rise P Rdc vs. Temp. Rise Resistance (Ohms) Resistance (Ohms) P Rdc vs. Temp. Rise Resistance (Ohms) Resistance (Ohms) P21-12 Rdc vs. Temp. Rise of 6 2/9

6 IR Profile Tape and Reel P C W Carrier Dimensions: P=.315/8, (inch/mm) C=.217/5,5 (inch/mm) W=.472/12, (inch/mm) Quantity per Reel: 7 pcs Reel Size: 7 inches User Direction of Feed A ENVIRONMENTAL & RELIABILITY DATA Storage Temperature: -4C to +1C Operating Temperature: -4C to +1C Resistance to Solder Reflow: 3 passes thru. +235C for 3 seconds minimum Marking permanency: Tested per JESD22-B17-A Solderability: Tested per MIL-STD-D Life Test: Tested per MIL-STD-22F, Method 18A Thermal Cycle: Tested per JESD22-B14-B, Test Condition G ABOUT US, founded in 1986, is a worldwide leader in the design, manufacture and sale of magnetic solutions. Vitec's market focus includes the power, power conditioning, telecom, networking, communications and computing. Vitec has also established strong alliances with chip manufacturers whereby magnetic solutions are designed in conjunction with unique silicon requirements and are offered as reference designs by the chip companies. With its Corporate Headquarters and Research & Development center located in Carlsbad, California, and its state of the art manufacturing facility and material sourcing in China, Vitec is uniquely positioned to supply the latest technology at the lowest cost. Vitec offers both standard and custom product design capabilities with all of its facilities being ISO certified. QUALITY POLICY Vitec will provide products and services that meet or exceed our Customer's requirements, conform to company policies and standards, and exhibit continuously improving levels of Quality. COMMITMENT VITEC Electronics empowers each of its employees by providing a business environment that encourages a commitment to excellence, a sense of ownership and personal accountability to all Vitec Customers. Competitive Pricing, Quality Products, and On Time Deliveries are expected from today s World Class Magnetics Suppliers. The high standards of today s customer are strengthening the dedication and commitment of VITEC Electronics to provide Total Customer Service. CONTACT US USA VITEC ELECTRONICS CORPORATION 6213 El Camino Real Carlsbad, CA 929 U.S.A. TEL: +1 (76) FAX: +1 (76) ASIA SHANGHAI VITEC ELECTRONICS CO., LTD He Chuan Road Min Hang District, Shanghai, 2113 China TEL: +86 (21) FAX: +86 (21) of 6 2/9

SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications

SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency

More information

HCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features

HCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery

More information

HCM1104 High current power inductors

HCM1104 High current power inductors Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base

More information

FP1309B High frequency, high current power inductors

FP1309B High frequency, high current power inductors Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)

More information

FP1008R7 High frequency, high current power inductors

FP1008R7 High frequency, high current power inductors Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs

More information

FP2207R High frequency, high current power inductors

FP2207R High frequency, high current power inductors Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing

More information

HCM1103 High current power inductors

HCM1103 High current power inductors Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses

More information

HCM1707. High current power inductors. Technical Data Applications

HCM1707. High current power inductors. Technical Data Applications Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery

More information

FP1005R High frequency, high current power inductors

FP1005R High frequency, high current power inductors Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics

More information

CL1208 Multi-phase power inductors

CL1208 Multi-phase power inductors Technical Data 1579 Effective December 216 CL128 Multi-phase power inductors Applications For exclusive use with Maxim Multi-phase controllers Voltage Regulator Modules (VRMs) and high power density VRMs

More information

DR1050 Shielded power inductors

DR1050 Shielded power inductors Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load

More information

DR1030 Shielded power inductors

DR1030 Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery

More information

Kun Shan MAZO tech Co., Ltd

Kun Shan MAZO tech Co., Ltd Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core

More information

DR1040 Shielded power inductors

DR1040 Shielded power inductors Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered

More information

Kun Shan MAZO tech Co., Ltd

Kun Shan MAZO tech Co., Ltd Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material

More information

Kun Shan MAZO tech Co., Ltd

Kun Shan MAZO tech Co., Ltd Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material

More information

HCP0704 High current power inductors

HCP0704 High current power inductors Supersedes February 009 pplications Voltage Regulator Module (VRM) Multi-phase regulators Desktop and servers Base station equipment Notebook and laptop regulators Data networking and storage systems Point-of-load

More information

HCM1307 High current power inductors

HCM1307 High current power inductors Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems - converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA)

More information

Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes

Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal

More information

HCV1605 High current power inductors

HCV1605 High current power inductors Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to

More information

High Current, High Frequency, Miniature Power Inductors

High Current, High Frequency, Miniature Power Inductors ECS-MPI4040 High Current, High Frequency, Automotive Applications: Driver assistance Information Entertainment Lighting Product description: AEC-Q200 Qualified, Grade 1 Handles high transient inrush current

More information

HCV1707 High current power inductors

HCV1707 High current power inductors Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55

More information

MPI40-V2 High current, low profile, miniature power inductors

MPI40-V2 High current, low profile, miniature power inductors Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product

More information

Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes

Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Part Number PE-20ACCXXXSTS Common Mode Impedance (0MHZ) Min Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and

More information

Coiltronics. High Frequency Inductor Catalog Magnetics for Power Management

Coiltronics. High Frequency Inductor Catalog Magnetics for Power Management Coiltronics High Frequency Inductor Catalog Magnetics for Power Management Magnetics Products for Power Management Table of Contents Inductor Series Size (mm) Page FP0705 7 x 7 x 5 4 FP0708 7 x 8.5 x 7.

More information

High power density, high efficiency, low profile shielded drum core power inductors

High power density, high efficiency, low profile shielded drum core power inductors Supersedes pril 2014 High power density, high efficiency, low profile shielded drum pplications Notebook power LCD panels Desktop and servers DVD players and portable power devices DC-DC Converters Buck,

More information

MPI25-V2 High current, low profile, miniature power inductors

MPI25-V2 High current, low profile, miniature power inductors Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,

More information

(TPSDC) SMD Low-DCR Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:

(TPSDC) SMD Low-DCR Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web: Version: January 13, 2017 (TPSDC) SMD Low-DCR Power Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New

More information

discontinued October 31, 2017 or until inventory is

discontinued October 31, 2017 or until inventory is Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes

More information

discontinued October 31, 2017 or until inventory is

discontinued October 31, 2017 or until inventory is Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and

More information

Surface Mount Wideband RF

Surface Mount Wideband RF Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)

More information

HCMA1104 Automotive grade High current power inductors

HCMA1104 Automotive grade High current power inductors Automotive grade High current power inductors Supersedes October 2017 Product features AEC-Q200 qualified High current carrying capacity Magnetically shielded, low EMI Frequency range up to 5 MHz Inductance

More information

HCMA1305 Automotive grade High current power inductors

HCMA1305 Automotive grade High current power inductors Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range up

More information

FP2 Low profile, high current power inductors

FP2 Low profile, high current power inductors Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower

More information

PLED Unidirectional Series (PLEDxUx)

PLED Unidirectional Series (PLEDxUx) (PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED

More information

HCMA0703 Automotive grade High current power inductors

HCMA0703 Automotive grade High current power inductors Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range

More information

SD3118 Low profile power inductors

SD3118 Low profile power inductors SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description

More information

(TPSLF) SMD Wire Wound Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:

(TPSLF) SMD Wire Wound Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web: Version: January 13, 2017 (TPSLF) SMD Wire Wound Power Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

High. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant.

High. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant. 1 / 9 High Current, Power Inductors FXL135-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 13.8x19x 5.mmm maximum surface mount package Powder iron core material Magnetically

More information

CLB1108 Multi-phase power inductors

CLB1108 Multi-phase power inductors Multi-phase power inductors Supersedes December 2013 Applications For exclusive use with Volterra or Maxim VPR-Devices Environmental Data Storage temperature range (component): -40 C to +125 C Operating

More information

ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers

ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss

More information

DRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data.

DRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data. Supersedes pril 0 Dual winding, high power density, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels s a transformer: SEPIC,

More information

MPIA25-V2 Automotive grade High current, low profile, miniature power inductors

MPIA25-V2 Automotive grade High current, low profile, miniature power inductors Product features AEC-Q qualified High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded, Low EMI Rugged construction Self resonant frequency (SRF) greater than

More information

Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications

Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for

More information

Low Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)

Low Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm) ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to

More information

Teccor brand Protection Thyristors Surface Mount

Teccor brand Protection Thyristors Surface Mount Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak

More information

YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...

YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc... YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication

More information

Inductors for Power Circuits

Inductors for Power Circuits Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means

More information

MPIA40-V2 Automotive grade High current, low profile, miniature power inductors

MPIA40-V2 Automotive grade High current, low profile, miniature power inductors Technical Data 5 Effective April 7 MPIA-V Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, Low EMI Rugged flexible construction Self resonant frequency (SRF)

More information

Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS

Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:

More information

(TPUD) SMD Low-Profile Wirewound Inductors. Token Electronics Industry Co., Ltd. Version: January 16, Web:

(TPUD) SMD Low-Profile Wirewound Inductors. Token Electronics Industry Co., Ltd. Version: January 16, Web: Version: January 16, 2017 (TPUD) SMD Low-Profile Wirewound Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

High power density, high efficiency, shielded drum core power inductors

High power density, high efficiency, shielded drum core power inductors Supersedes pril 4 High power density, high efficiency, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels DC-DC converters

More information

Coiltronics DRQ Series Dual winding, shielded inductors/transformers

Coiltronics DRQ Series Dual winding, shielded inductors/transformers Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM

More information

Mini Wideband Transformers WBC

Mini Wideband Transformers WBC Document - Mini Wideband Transformers WBC Smallest wideband transformer: mm square mm high Vrms interwinding isolation, / Watt RF input power ma max current rating. Designer s Kit C contains three of each

More information

Wideband Transformers

Wideband Transformers Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series

More information

SYNCHRONOUS BUCK LGA POWER BLOCK

SYNCHRONOUS BUCK LGA POWER BLOCK Features 0A Multiphase building block No derating up to T C = T PCB = 95ºC Optimized for low power loss Bias supply range of.5v to 6.0V Operation up to 1.5MHz Over temperature protection Bi-directional

More information

HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner

HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;

More information

SMT Power Inductor High Current Molded Power Inductor - PA4345.XXXNLT Series

SMT Power Inductor High Current Molded Power Inductor - PA4345.XXXNLT Series High Current Molded Power Inductor - PA5.XXXNLT Series NEW - AEC-Q Qualified Height:.mm Max Footprint:.mm x 5.mm Max Current Rating: up to 1.A Inductance Range:.1uH to 1.5uH Shielded construction and compact

More information

Low Profile High Current Shielded Inductor TL2525SG01 (6.86x6.47x3mm)

Low Profile High Current Shielded Inductor TL2525SG01 (6.86x6.47x3mm) ow Profile High Current Shielded Inductor TSG (6.86x6.7xmm) FEATURES: APPICATIONS: ow profile, height only (. mm) PDA/notebook/desktop/server applications Operating temperature range - C to + C High current

More information

WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES

WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone

More information

Low Profile High Current Shielded Inductors

Low Profile High Current Shielded Inductors ow Profile High Current Shielded Inductors TSG51 FEATURES: APPICATIONS: ow height (. mm) PDA/notebook/desktop/server applications Operating temperature range - 55 C to + C High current PO converters Frequency

More information

SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series

SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series High Current Molded Power Inductor - PA.XXXNLT Series NEW - AEC-Q Qualified Height:.mm Max Footprint:.mm x 5.mm Max Current Rating: up to A Inductance Range:.uH to uh Shielded construction and compact

More information

Automotive grade Dual winding, high power density shielded drum core power inductors

Automotive grade Dual winding, high power density shielded drum core power inductors Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,

More information

TQP PCB. DC-6 GHz Gain Block. Applications. Ordering Information

TQP PCB. DC-6 GHz Gain Block. Applications. Ordering Information Applications Mobile Infrastructure LTE / WCDMA / CDMA CATV Point to Point General Purpose Wireless Product Features Cascadable Gain Block DC 6000 MHz 19.1 db Gain @ 1.9 GHz 4.7 db Noise Figure @ 1.9 GHz

More information

SPECIFICATION FOR APPROVAL PAGE: 1

SPECIFICATION FOR APPROVAL PAGE: 1 PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b

More information

HCM1A1305 Automotive grade High current power inductors

HCM1A1305 Automotive grade High current power inductors Technical Data Effective September HCMA Automotive grade High current power inductors Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, low EMI Frequency range

More information

Surface Mount RF PIN Low Distortion Attenuator Diodes. Technical Data. HSMP-381x Series and HSMP-481x Series. Features

Surface Mount RF PIN Low Distortion Attenuator Diodes. Technical Data. HSMP-381x Series and HSMP-481x Series. Features Surface Mount RF PIN Low Distortion Attenuator Diodes Technical Data HSMP-81x Series and HSMP-481x Series Features Diodes Optimized for: Low Distortion Attenuating Microwave Frequency Operation Surface

More information

AG303-63PCB. Product Features. Product Description. Functional Diagram. Applications. Specifications (1) Typical Performance (1)

AG303-63PCB. Product Features. Product Description. Functional Diagram. Applications. Specifications (1) Typical Performance (1) AG-6 Product Features DC 6 MHz. db Gain @ 9 MHz + dbm PdB @ 9 MHz +6 dbm OIP @ 9 MHz Single Voltage Supply Internally matched to Robust V ESD, Class C Lead-free/green/RoHS-compliant SOT-6 package Applications

More information

TQM EVB B7 BAW Duplexer

TQM EVB B7 BAW Duplexer Applications LTE handsets, data cards & mobile routers Band 7 2500-2570 MHz Uplink 2620-2690 MHz Downlink 8 Pin 1.6 x 2.0 mm Package Product Features Highly Selective LowDrift BAW Duplexer Low Insertion

More information

Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification

Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification 1. Features: 2.4GHz applications Bluetooth, WiFi, Zigbee, ISM. Ultra small ceramic chip solution. High Efficiency. SMD mounted.

More information

Electrical 25 C Operating Temperature -40 C to 130 C 5. (3-4) 370mW MAX

Electrical 25 C Operating Temperature -40 C to 130 C 5. (3-4) 370mW MAX Power Range: Up to 0W Height: 1.7mm Max Footprint: 17.7mm x 14.0mm Max Topology: Forward and Flyback Electrical Specifications @ 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (-4) 1.7µH ±10%

More information

ISOCOM IS127 COMPONENTS FPH1 IYWW DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION

ISOCOM IS127 COMPONENTS FPH1 IYWW DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION DESCRIPTION The is an optically coupled isolator consisting of an infrared light emitting diodeand a high voltage NPN silicon photo darlington which has an integral baseemitter resistor to optimise switching

More information

Grandis Antenna for ISM applications Part No. SR42I010-L & SR42I010-R lamiiant Product Specification

Grandis Antenna for ISM applications Part No. SR42I010-L & SR42I010-R lamiiant Product Specification Antenna for ISM applications -L & SR42I010-R lamiiant Product Specification 1. Features Antenna for ISM 868 and 915 MHz applications including LoRa, SigFox, and Weightless-P Frequency bands from 863-928MHz

More information

Transformers for Broadband Access

Transformers for Broadband Access HDSL & SDSL Interface Transformers Line Interface 56kbps Modem Transformer Transformers for Broadband Access SECTION 9 Transformers for Broadband Access TALEMA PROFILE Founded in 1975, The TALEMA International

More information

SP4T RF Switch HSWA4-63DR+

SP4T RF Switch HSWA4-63DR+ MMIC SP4T RF Switch Absorptive RF Switch with internal driver Single Supply Voltage, +2.3V to +5.5V The Big Deal High Isolation, 61 @ 0.9 GHz Low insertion loss, 0.9 at 0.9 GHz High IP3, +58 m Fast switching,

More information

Description/ Features 3.80 (.150) 3.30 (.130) 0.30 (.012) 0.15 (.006) 2.0 TYP. (.079 TYP.)

Description/ Features 3.80 (.150) 3.30 (.130) 0.30 (.012) 0.15 (.006) 2.0 TYP. (.079 TYP.) MBRS130TR SCHOTTKY RECTIFIER 1 Amp SMB Major Ratings and Characteristics Characteristics MBRS130TR Units I F(AV) Rectangular 1.0 A waveform V RRM 30 V I FSM @ t p = 5 µs sine 230 A V F @ 1.0Apk, T = 125

More information

TQP DC 6 GHz Gain Block

TQP DC 6 GHz Gain Block Product Description The is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1.9 GHz, the amplifier typically provides 19 db gain, +31.7 dbm OIP3,

More information

D12S1R880D FEATURES. D12S1R880D, Non-Isolated, Power Block DC/DC Power Modules: 7.0~13.2Vin, 0.6V~1.8V/80A, 2.5V/70A, 3.3V/65A APPLICATIONS

D12S1R880D FEATURES. D12S1R880D, Non-Isolated, Power Block DC/DC Power Modules: 7.0~13.2Vin, 0.6V~1.8V/80A, 2.5V/70A, 3.3V/65A APPLICATIONS D12S1R88D FEATURES High efficiency with @55 95.5%@ 11Vin, 3.3V/65A out 94.7%@ 11Vin, 2.5V/7A out 93.3%@ 11Vin, 1.8V/8A out 91.%@ 11Vin, 1.V/8A out 87.%@ 11Vin,.6V/8A out High accuracy current sense resistor

More information

AG302-86PCB. Product Features. Product Description. Functional Diagram. Applications. Typical Performance (1) Specifications (1)

AG302-86PCB. Product Features. Product Description. Functional Diagram. Applications. Typical Performance (1) Specifications (1) AG-6 Product Features DC 6 MHz. db Gain @ 9 MHz +. dbm PdB @ 9 MHz +6 dbm OIP@ 9 MHz Single Voltage Supply Internally matched to Ω Robust V ESD, Class C Lead-free/green/RoHS-compliant SOT-6 package Applications

More information

VS-800 Ultra-Low Jitter High Frequency VCSO

VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator

More information

SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions

SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter

More information

GS61004B 100V enhancement mode GaN transistor Preliminary Datasheet

GS61004B 100V enhancement mode GaN transistor Preliminary Datasheet Features 100V enhancement mode power switch Bottom-side cooled configuration R DS(on) = 15 mω I DS(max) = 45 A Ultra-low FOM Island Technology die Low inductance GaNPX package Easy gate drive requirements

More information

TQP7M W High Linearity Amplifier. Applications. Ordering Information. Part No. Description

TQP7M W High Linearity Amplifier. Applications. Ordering Information. Part No. Description Applications Repeaters Mobile Infrastructure CDMA / WCDMA / LTE General Purpose Wireless Product Features 3-pin SOT-89 Package Functional Block Diagram 4-4 MHz +27.5 dbm P1dB +44 dbm Output IP3 GND 4 17.8

More information

P7605 Family POWER INDUCTOR PRODUCT DATA SHEET

P7605 Family POWER INDUCTOR PRODUCT DATA SHEET PRODUCT DATA SHEET POWER INDUCTOR P7605 Family Features Lead-free (Pb-free) RoHS compliant High Current (Saturation to 20A) Low DCR (to 9mΩ) Low profile (to

More information

The UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage

The UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance

More information

Shielded Power Inductors

Shielded Power Inductors Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz

More information

PLEDxUSW Series, Unidirectional, White DO-214AA

PLEDxUSW Series, Unidirectional, White DO-214AA PLEDxUSW Unidirectional Series PLEDxUSW Series, Unidirectional, White DO-214AA RoHS Description Agency Approvals Agency Agency File Number E133083 The PLEDxUSW open LED protectors provide an electronic

More information

TGV2561-SM GHz VCO with Divide by 2

TGV2561-SM GHz VCO with Divide by 2 GND RFout / 2 Vtune TGV2561-SM Applications Point to Point Radio / VSAT Millimeter-wave Communications Test Equipment 32-pin 5x5mm package Product Features Functional Block Diagram Frequency range: 8.9

More information

1A 1.5MHz PFM/PWM Synchronous Step-Down Converter. January 2014 Rev FEATURES. Fig. 1: XRP6658 Application Diagram

1A 1.5MHz PFM/PWM Synchronous Step-Down Converter. January 2014 Rev FEATURES. Fig. 1: XRP6658 Application Diagram January 2014 Rev. 1.6.0 GENERAL DESCRIPTION The XRP6658 is a synchronous current mode PWM step down (buck) converter capable of delivering up to 1 Amp of current and optimized for portable battery-operated

More information

Single-Phase Full-Wave Motor Driver with Built-in Hall Sensor. General Description

Single-Phase Full-Wave Motor Driver with Built-in Hall Sensor. General Description Single-Phase Full-Wave Motor Driver with uilt-in Hall Sensor Features On-chip Hall Sensor High Sensitivity Hall Effect Sensor IC: ±15G(Typ.) uilt-in Lock Protection and Auto Restart Function Speed Controllable

More information

PKF series. General information. PKF series

PKF series. General information. PKF series PKF series PKF series General information SMD and through hole versions with ultra-low component height 8.0 mm (0.315 in.) Up to 87% efficiency at full load Safety requirements in accordance with EN60950

More information

id8603 PFM Step-Up DC-DC Converters with Internal Schottky Diode General Description Applications Features Ordering Information Marking Information

id8603 PFM Step-Up DC-DC Converters with Internal Schottky Diode General Description Applications Features Ordering Information Marking Information PFM Step-Up DC-DC Converters with Internal Schottky Diode General Description The compact, high-efficiency, PFM step-up DC- DC converters are available in SOT-89-3,SOT-23-3 and SOT-23-5 packages. They

More information

SPECIFICATION FOR APPROVAL INDEX

SPECIFICATION FOR APPROVAL INDEX SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS 17448-5 1 DESCRIPTION The features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has

More information

PLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description

PLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function

More information

TQP DC-6 GHz Gain Block

TQP DC-6 GHz Gain Block Applications Mobile Infrastructure LTE / WCDMA / CDMA / EDGE CATV Point to Point General Purpose Wireless SOT-89 Package Product Features Functional Block Diagram DC-6000 MHz 15.4 db Gain @ 1.9 GHz 4 3.6

More information

20CJQ060 SCHOTTKY RECTIFIER. 2 Amp. Case Styles. I F(AV) = 2 Amp V R = 60V. Bulletin PD rev. G 07/06. Description/ Features

20CJQ060 SCHOTTKY RECTIFIER. 2 Amp. Case Styles. I F(AV) = 2 Amp V R = 60V. Bulletin PD rev. G 07/06. Description/ Features 20CJQ060 SCHOTTKY RECTIFIER 2 Amp I F(AV) = 2 Amp V R = 60V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 2.0 A waveform V RRM 60 V I FSM @ tp = 5 μs sine 385 A V F

More information

(TPSLF) Low DCR High Saturation Power Inductors

(TPSLF) Low DCR High Saturation Power Inductors Version: July 31, 2017 (TPSLF) Low High Saturation Power Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

FL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum

FL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum FL75R10A Filter Module 75Vdc Input Maximum, 10A Maximum FEATURES RoHS Compliant Small size: SMD: 25.4mm x 25.4mm x 12.5mm (1.0 x 1.0 x 0.49 ) Through hole: 25.4mm x 25.4mm x 12.7mm (1.0 x 1.0 x 0.50 )

More information

ISA-PLAN // Precision resistors. SMT // Size Features

ISA-PLAN // Precision resistors. SMT // Size Features Features 5 W power rating at 05 C Constant current up to 35 A (4 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant

More information