CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
|
|
|
- Leona Dennis
- 5 years ago
- Views:
Transcription
1 CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V 1.8V Version 2.5V Version 3.0V Version 3.3V Version IQD Products Ltd Station Road Crewkerne Somerset TA18 8AR United Kingdom Tel: +44 (0) Fax: +44 (0) info@iqdfrequencyproducts.com Registered in England No: VAT Registration No: GB
2 CXOQ 1.8V Description Technological advancements permit 2.5 x 2.0mm CXOQ quartz oscillator to have design-in capabilities of withstanding high shock applications. Additionally, the ultra miniature CXOQ takes advantage of Statek s well known reliability and impeccable quality. -SM1 SM1 Gold Plated (RoHS compliant) -SM5 SM5 Solder Dipped (RoHS compliant) Please note that all data is only valid at 25 C unless otherwise stated. Parameters Tolerance Tolerance Condition Stability Ageing Electrical Parameters 400.0kHz to 100.0MHz ±30.00ppm to 25 C ±50.00ppm to ±100.00ppm ±5ppm max in 1st year 1.8V ±10% Supply Current (typical): 24MHz 32MHz 50MHz Absolute Maximum Range: -0.5V to 5.0V Outline (mm) -SM1 = SM1 Gold Plated (RoHS compliant) Operating Temperature Ranges -10 to 70 C -40 to 85 C -55 to 125 C Output Details Output Compatibility Drive Capability CMOS 15pF Output Control Start-Up Tme: 5ms max Environmental Parameters Shock: 5000G, 0.3ms, 1/2 sine Vibration: 20G, Hz, swept sine per MIL-STD-202G, Method 204D, Condition D Storage Temperature Range: -55 to 125 C Manufacturing Details Termination Variants: SM1 = Gold Plated (RoHS compliant) SM3 = Solder Dipped (non RoHS compliant) SM5 = Solder Dipped (RoHS compliant) Maximum Process Temperature: 260 C for 20 seconds max Ordering Information (*minimum required): * Model* Termination Variant* Tolerance (@25 C)* Stability (over operating temperature range)* Operating Temperature Range Example: 10.0MHz CXOQ 1.8V SM1 CMOS ±100ppm ±100ppm -40 to 85C NC
3 CXOQ 1.8V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Optional Compliant Not Applicable Packaging Details Pack Style: Tray Pack Size: 1 Pack Style: Reel Pack Size: 1,000 Supplied on a tray Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 1.8V ±10% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 400.0kHz 100.0MHz -10 to 70 ± to 85 ± to 125 ± This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
4 CXOQ 2.5V Description Technological advancements permit 2.5 x 2.0mm CXOQ quartz oscillator to have design-in capabilities of withstanding high shock applications. Additionally, the ultra miniature CXOQ takes advantage of Statek s well known reliability and impeccable quality. -SM1 SM1 Gold Plated (RoHS compliant) -SM5 SM5 Solder Dipped (RoHS compliant) Please note that all data is only valid at 25 C unless otherwise stated. Parameters Tolerance Stability Ageing Electrical Parameters 400.0kHz to 100.0MHz ±30.00ppm to ±100.00ppm ±50.00ppm to ±100.00ppm ±5ppm max in 1st year 2.5V ±10% Supply Current (typical): 24MHz 32MHz 50MHz Absolute Maximum Range: -0.5V to 5.0V Outline (mm) -SM1 = SM1 Gold Plated (RoHS compliant) Operating Temperature Ranges -10 to 70 C -40 to 85 C -55 to 125 C Output Details Output Compatibility Drive Capability CMOS 15pF Output Control Start-Up Tme: 5ms max Environmental Parameters APPLICATIONS: Military Medical Industrial Shock: 5000G, 0.3ms, 1/2 sine Vibration: 20G, Hz, swept sine per MIL-STD-202G, Method 204D, Condition D Storage Temperature Range: -55 to 125 C Manufacturing Details Termination Variants: SM1 = Gold Plated (RoHS compliant) SM3 = Solder Dipped (non RoHS compliant) SM5 = Solder Dipped (RoHS compliant) Maximum Process Temperature: 260 C for 20 seconds max
5 CXOQ 2.5V Ordering Information (*minimum required): * Model* Termination Variant* Tolerance (@25 C)* Stability (over operating temperature range)* Operating Temperature Range Example: 10.0MHz CXOQ 2.5V SM1 CMOS ±100ppm ±100ppm -40 to 85C NC Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Optional Compliant Not Applicable Packaging Details Pack Style: Tray Pack Size: 1 Pack Style: Reel Pack Size: 1,000 Supplied on a tray Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 2.5V ±10% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 400.0kHz 100.0MHz -10 to 70 ± to 85 ± to 125 ± This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
6 CXOQ 3.0V Description Technological advancements permit 2.5 x 2.0mm CXOQ quartz oscillator to have design-in capabilities of withstanding high shock applications. Additionally, the ultra miniature CXOQ takes advantage of Statek s well known reliability and impeccable quality. -SM1 SM1 Gold Plated (RoHS compliant) -SM5 SM5 Solder Dipped (RoHS compliant) Please note that all data is only valid at 25 C unless otherwise stated. Parameters Tolerance Stability Ageing Electrical Parameters 400.0kHz to 100.0MHz ±30.00ppm to ±100.00ppm ±50.00ppm to ±100.00ppm ±5ppm max in 1st year 3.0V ±10% Supply Current (typical): 24MHz 32MHz 50MHz Absolute Maximum Range: -0.5V to 5.0V Outline (mm) -SM1 = SM1 Gold Plated (RoHS compliant) Operating Temperature Ranges -10 to 70 C -40 to 85 C -55 to 125 C Output Details Output Compatibility Drive Capability CMOS 15pF Output Control Start-Up Tme: 5ms max Environmental Parameters Shock: 5000G, 0.3ms, 1/2 sine Vibration: 20G, Hz, swept sine per MIL-STD-202G, Method 204D, Condition D Storage Temperature Range: -55 to 125 C Manufacturing Details Termination Variants: SM1 = Gold Plated (RoHS compliant) SM3 = Solder Dipped (non RoHS compliant) SM5 = Solder Dipped (RoHS compliant) Maximum Process Temperature: 260 C for 20 seconds max Ordering Information (*minimum required): * Model* Termination Variant* Tolerance (@25 C)* Stability (over operating temperature range)* Operating Temperature Range Example: 10.0MHz CXOQ 3.0V SM1 CMOS ±100ppm ±100ppm -40 to 85C NC
7 CXOQ 3.0V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Optional Compliant Not Applicable Packaging Details Pack Style: Reel Pack Size: 1,000 Pack Style: Tray Pack Size: 1 Tape & reel in accordance with EIA-481-D Supplied on a tray Electrical Specification - maximum limiting values 3.0V ±10% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 400.0kHz 100.0MHz -10 to 70 ± to 85 ± to 125 ± This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
8 CXOQ 3.3V Description The surface-mount CXOQ is an ultra-miniature quartz crystal oscillator with an optional Enable/Disable function. Hermetically sealed in a highly reliable ceramic housing Statek have designed this oscillator to withstand high stock applications. -HG-SM1 SM1 Gold Plated (RoHS compliant) high shock -HG-SM5 SM5 Solder Dipped (RoHS compliant) high shock -SM1 SM1 Gold Plated (RoHS compliant) -SM5 SM5 Solder Dipped (RoHS compliant) FEATURES: High shock survival Low acceleration sensitivity (HG version) Low power consumption High frequency stability CMOS and TTL compatible Optional output enable/disable with Tri-State Low EMI emission Hermetically sealed ceramic package Full military testing per MIL PRF available APPLICATIONS: Military Medical Industrial Please note that all data is only valid at 25 C unless otherwise stated. Outline (mm) -SM1 = SM1 Gold Plated (RoHS compliant) Parameters 400.0kHz to 100.0MHz Tolerance ±30.00ppm to ±100.00ppm Tolerance 25 C Stability ±50.00ppm to ±100.00ppm Ageing ±5ppm max in 1st year Note: Tighter Tolerances and Stabilities are available - please contact an IQD Sales Office. Electrical Parameters 3.3V ±10% Absolute Maximum Range: -0.5V to 5.0V Supply Current (typical): 24MHz 32MHz 50MHz Operating Temperature Ranges -10 to 70 C -40 to 85 C -55 to 125 C Output Details Output Compatibility CMOS Drive Capability 15pF Start-Up Time: 5ms max Note: Tighter Duty Cycles are available - please contact an IQD Sales Office. Output Control Enable/Disable Function: Logic 1 to pad 1 enables oscillator output. Logic 0 to pad 1 disables oscillator output, output goes to high impedance state, current consumption very low, internal oscillator stops. No connection to pad 1 enables oscillator output.
9 CXOQ 3.3V Environmental Parameters Storage Temperature Range: -55 to 125 C Shock: Standard: 5000G, 0.3ms, 1/2 sine. High Shock (HG): 20000G, 0.3ms, 1/2 sine. Vibration: MIL-STD-202G, Method 204D, Condition D: 20G, Hz swept sine. Note: Random vibration testing is also available - please contact an IQD Sales Office. Manufacturing Details Maximum Process Temperature: 260 C (20secs max) Ordering Information * Model* Shock Level* Termination Variant* Output Tolerance (@ 25 C)* Stability (over operating temperature range)* Operating Temperature Range Pad 1 Function* (*minimum required) Shock Level Options: Blank = Standard HG = High Shock Termination Variants: SM1 = Gold Plated SM5 = Solder Dipped Note: non-rohs compliant terminations are available (SM3 = Solder Dipped) - please contact an IQD Sales Office. Pad 1 Function Options: EN = Enable/Disable NC = No Connection Example: 10.0MHz CXOQ 3.3V SM1 CMOS ±100ppm ±100ppm -40 to 85C NC Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Optional Compliant Not Applicable Packaging Details Pack Style: Reel Pack Size: 1,000 Pack Style: Tray Pack Size: 1 Tape & reel in accordance with EIA-481-D Supplied on a tray Electrical Specification - maximum limiting values 3.3V ±10% Min Max Temperature Range Stability Min Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 400.0kHz 100.0MHz -10 to 70 ± to 85 ± to 125 ± This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website. Sales Office Contact Details:
10 CXOQ 3.3V UK: +44 (0) Germany: France: USA: Web: Printed on 25 Oct 18 16:38 using Model Data Sheet V Page 10 of 10
CXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V
CXOLAT he CXOLAT 32.768kHz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design.
IQXT IQXT-205-3
IQXT-205-3 IQXT-205-3 is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT-205-3-18 IQXT-205-3-25 IQXT-205-3-28 IQXT-205-3-30 IQXT-205-3-33 A 1.8V version
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
QTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications
Description The QTCH series are miniature surface-mount (SMD) crystal oscillators supporting.768khz* fundamental mode operating in a wide supply voltage range from.5vdc to.vdc, very low power consumption
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
VCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model
Description Q-Tech s 5x7mm LVCMOS Voltage Controlled Crystal Oscillators consist of an IC operating at a supply voltage 3.3Vdc and a miniature strip quartz crystal that operates at the fundamental frequency.
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Solder Dip Option: T = Standard S = Solder Dip (*) Package
Description Q-Tech s surface mount 7 x 5 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Solder Dip Option: T = Standard S = Solder Dip (*) G = Solder Dip (*) Package
Description Q-Tech s surface mount 5 X 7 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
EMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R
The most efficient way to reduce EMI (Electromagnetic Interference) is to reduce it from its principle source the clock oscillator. Mercury 3HM572, an integrated clock module composed of a spread spectrum
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT
Description Q-Tech s 5x7mm LVDS and LVPECL hybrid oscillators consist of an IC operating at various supply voltages of 2.5V and 3.3Vdc and a miniature strip quartz crystal. The series is offered in various
Q-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature strip quartz crystal built in a low profile hermetically ceramic package
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator
CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series
Features: ME83x is a 32.768 KHz CMOS output TCXO with a maximum frequency stability of ± 5 ppm (± 2.62 minutes / year) over -0 to +85 C, much better time-keeping accuracy than the competition. A proprietary
PX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
Q-TECH CORPORATION. Description. Features. Applications
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature round or strip quartz crystal built in a low profile hermetically ceramic
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
Solder Dip Option: T = Standard S = Solder Dip (*) Package: 81 = Thru-Hole 82 = Formed Lead 83 = Gull Wing
Description Q-Tech s surface mount 7 x 5 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature stripat quartz crystal built in a low profile ceramic
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
V-Type Voltage Controlled Crystal Oscillator (VCXO)
Product Data Sheet V-Type Voltage Controlled Crystal Oscillator (VCXO) Features Output Frequencies to 77.760 MHz 5.0 or 3.3 volt operation Tri-State Output Jitter Performance 12MHz) VCXO
CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. 3.3, 5.0, 12.0 or 15.0Vdc. CMOS Sine. CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. LVDS (1 to 4 pairs) 3.
Q-TECH Q-Tech is the leading supplier of crystal controlled oscillators for space applications. Q-Tech has 40 years space heritage, is AS9100 certified, is the leading QPL supplier to MIL-PRF-55310 class
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
VCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description
C-708 LPECL, LDS Crystal Oscillator Data Sheet Ultra Low Phase Noise C-708 Description ectron s C-708 Crystal Oscillator is a quartz stabilized, low phase noise, differential output oscillator which is
VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
Product Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
MX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
SM77D Series 3.3 V CMOS Clock Oscillators January 2016
January 206 Pletronics SM77D Series is a quartz crystal controlled precision square wave generator with a CMOS output. The SM77D series will directly interface TTL devices also. The package is designed
SM44T Series 3.3 V CMOS Clock Oscillators April 2017
Pletronics SM44 Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
Packaging Outline. 7mm. FN A = Product Family. Frequency Stability *AA = ±20 ppm (-10 to +70 C) *A = ±25 ppm (-10 to +70 C)
Series Crystal Clock Oscillator (XO) 3.3V CMOS Low Jitter XO Actual Size = 5 x 7mm Product Features Less than 1.5 ps RMS jitter with non-pll design 3.3V CMOS/TTL compatible logic levels Pin-compatible
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
T5321 Series T5421 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 1MHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
VX-500 Voltage Controlled Crystal Oscillator
VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature
SELECTION GUIDE. Visit our website THE COMPANY
SELECTION GUIDE T h e w i d e s t c h o i c e o f q u a r t z c r y s t a l s, o s c i l l a t o r s a n d s e n s o r s Visit our website www.statek.com THE COMPANY In 1970, Statek Corporation was the
SM55T Series 3.3 V CMOS Clock Oscillators November 2018
November 208 Pletronics SM55 Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost
Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
PX-360 Precision Crystal Oscillator PX-360 Features Frequency: 1MHz to 80 MHz 20 Lead Flatpack package Package equivalent of MIL-PRF-55310/21 4-Point resonator mount for high shock & vibration performance
SM55TZ Series V CMOS Clock Oscillators November 2018
Pletronics SM55 Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-55310/30B 13 June 2005 SUPERSEDING MIL-PRF-55310/30A 19 October 2004 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 450 khz THROUGH
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
Programmable Low-Jitter Precision CMOS Oscillator
DSC8121 General Description The DSC8101 & DSC8121 series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide
LVDS 5 x 3.2mm 2.5V Oscillator
LVDS 5 x 3.2mm 2.5V Oscillator Features This part is no longer available from Fox, please contact IDT for this product. Model: FXU-LC52 SERIES Freq: 0.016 MHz to 1.35 GHz Rev. 07/08/2015 ULTRA Low Jitter
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
VFH2321-VFH2324 VFH2421-VFH2424 XO Hi-REL, 1.8V 5x7mm SMD, HCMOS
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±0.5 minute for excellent temperature stability 168 hour Class B burn-in
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
PERFORMANCE SPECIFICATION SHEET
INCH-POUND 18 December 2017 SUPERSEDING MIL-PRF-55310/30D 15 October 2008 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 450 KHz THROUGH 100 MHz, HERMETIC
VS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
S K CMOS Clock Oscillator
Pletronics S3883 is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced oscillator.
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-55310/34C 1 February 2013 SUPERSEDING MIL-PRF-55310/34B 19 April 2010 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 500 KHz THROUGH
Parameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf
Model 1380100XXX Features Industry standard 20 x 12.7 mm SMT package Stratum 3E per GR1244CORE 3.3V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching Wireless Communication
DISCONTINUED. SM77H Series 5.0V CMOS Clock Oscillators
Pletronics SM77H Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced
QT93W and QT93P SERIES HIGH-RELIABILITY LVPECL OR LVDS MINIATURE CLOCK OSCILLATORS 2.5 to 3.3Vdc - 40MHz to 250MHz Description
-TECH T9W and T9P SERIES Description -Tech s surface-mount T9 series oscillators consist of a 2.5Vdc and.vdc differential PECL or LVDS output oscillator IC and a round AT high-precision quartz crystal
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
HCMOS 7 x 5mm 1.8V Oscillator
HCMOS 7 x 5mm 1.8V Oscillator Features This part is no longer available from Fox, please contact IDT for this product. Model: FXU-HC71 SERIES Freq: 0.016 MHz to 125 MHz Rev. 08/31/2015 ULTRA Low Jitter