PO54G14A, PO74G14A. Pin Configuration. 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: V CC 6A 6Y 5A 5Y 4A 4Y 1A 1Y 2A 2Y 3A 3Y GND
|
|
|
- Morris Skinner
- 5 years ago
- Views:
Transcription
1 FEATURES:. Patented technology. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 680MHz with 5pf load. Operating frequency up to 300MHz with 15pf load. Operating frequency up to 100MHz with 50pf load. VCC Operates from 1.65V to 3.6V. Propagation delay < 1.8ns max with 15pf load. Low input capacitance: 4pf typical. Available in 14pin 150mil wide SOIC package DESCRIPTION: Potato Semiconductor s PO74G14A is designed for world top performance using submicron CMOS technology to achieve 1.125GHz TTL /CMOS output frequency with less than 1.8ns propagation delay. This hex inverter contains six independent inverters designed for 1.65-V to 3.6-V VCC operation. The PO74G14A performs the Boolean function Y= A. s can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V/5V system environment. Pin Configuration 1A 1Y 2A 2Y 3A 3Y GND V CC 6A 6Y 5A 5Y 4A 4Y 2A 2Y 3A 1Y 1A V CC 6A Y GND 4Y 4A 6Y 5A 5Y Pin Description Logic Block Diagram INPUT A H OUTPUT Y L A Y L H 1 01/01/10
2 Maximum Ratings Description Max Unit Storage Temperature -65 to 150 C Operation Temperature -55 to 125 C Operation Voltage -0.5 to +4.6 V Voltage -0.5 to +5.5 V Output Voltage -0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description Test Conditions Min Typ Max Unit VOH Output High voltage Vcc=3V Vin=VIH or VIL, IOH= -12mA V VOL Output Low voltage Vcc=3V Vin=VIH or VIL, IOH=12mA V VIH High voltage Guaranteed Logic HIGH Level ( Pin) V VIL Low voltage Guaranteed Logic LOW Level ( Pin) V IIH High current Vcc = 3.6V and Vin = 5.5V ua IIL Low current Vcc = 3.6V and Vin = 0V ua VIK Clamp diode voltage Vcc = Min. And IIN = -18mA V 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, 25 C ambient. 3. This parameter is guaranteed but not tested. 4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 5. VoH = Vcc 0.6V at rated current 2 01/01/10
3 Power Supply Characteristics Symbol Description Test Conditions (1) Min Typ Max Unit IccQ Quiescent Power Supply Current Vcc=Max, Vin=Vcc or GND ua 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, 25 C ambient. 3. This parameter is guaranteed but not tested. 4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Capacitance Parameters (1) Description Test Conditions Typ Unit Cin Capacitance Vin = 0V 4 pf Cout Output Capacitance Vout = 0V 6 pf 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description Test Conditions (1) Max Unit tplh Propagation Delay A to Y CL = 15pF 1.8 ns tphl Propagation Delay A to Y CL = 15pF 1.8 ns tr/tf Rise/Fall Time 0.8V 2.0V 0.8 ns CL = 50pF 100 MHz CL =15pF 300 MHz CL = 5pF 680 MHz CL = 2pF 1125 MHz 1. See test circuits and waveforms. 2. tplh, tphl, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz 3 01/01/10
4 Test Waveforms Propagation Delay 3V 1.5V 0V tplh tphl Output VoH 2.0V 1.5V 0.8V VoL tr tf Test Circuit Vcc Pulse Generator D.U.T. 50Ohm 50pF to 2pF 4 01/01/10
5 Packaging Mechanical Drawing: 14 pin 150mil SOIC Denotes dimensions in inches Denotes dimensions in millimenters Packaging Mechanical Drawing: 14pin Leadless Ceramic Chip Carrier Denotes dimensions in inches Denotes dimensions in millimenters 5 01/01/10
6 Packaging Mechanical Drawing: 20pin Ceramic Dual Flatpack (0,51) (0,25) (2,03) (1,63) (0,51) (0,25) (1,40) (1,14) (1,14) (0,89) (0,71) (0,54) (1,27) (1,14) (0,89) (9,09) (8,69) (9,09) (7,80) Denotes dimensions in inches Denotes dimensions in millimenters IC Ordering Information Ordering Code Package Top-Marking T A PO74G14ASU for Tube 14pin SOIC Pb-free & Green POTATO74G14AS -40 C to 125 C PO74G14ASR for Tape & Reel 14pin SOIC Pb-free & Green POTATO74G14AS -40 C to 125 C PO54G14ALU for Tube 14pin Leadless Ceramic Chip Carrier Pb-free & Green POTATO54G14AL -55 C to 125 C 20pin Ceramic PO54G14AFU for Tube Pb-free & Green Dual Flatpack POTATO54G14AF -55 C to 125 C IC Package Information PACKAGE CODE PACKAGE TYPE TAPE WIDTH (mm) TAPE PITCH (mm) L LCCC 20 N/A N/A N/A PIN 1 LOCATION TAPE TRAILER LENGTH QTY PER REEL TAPE LEADER LENGTH S SOIC Top Left Corner 39 (12 ) (20 ) 55 N/A N/A N/A 55 F CFP 14 N/A N/A N/A N/A N/A N/A 150 QTY PER TUBE 6 01/01/10
PO54G00A, PO74G00A. Pin Configuration. Pin Description. Logic Block Diagram. 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: V CC 1B
FEATURES:. Patented technology. Specified From 40 C to 85 C, 40 C to 125 C, and 55 C to 125 C. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 750MHz with 5pf load. Operating
PO74G139A. Pin Configuration. Logic Block Diagram. Pin Description. 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION:
FEATURES:. Patented technology. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 800MHz with 5pf load. Operating frequency up to 350MHz with 15pf load. VCC Operates from 1.65V
PO74G2308A FEATURES: DESCRIPTION: Description. 700MHz TTL/CMOS Potato Chip. BUF_IN OUTPUT 1 to OUTPUT 8. Outputs. 1.2V - 3.6V 1:8 CMOS Clock Driver
FEATURES:. Patented technology. Operating frequency up to 700MHz with 2pf load. Operating frequency up to 550MHz with 5pf load. Operating frequency up to 350MHz with 15pf load. Operating frequency up to
PO54G374A, PO74G374A
OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS FEATURES:. Patented technology. Specified From 40 C to 85 C, 40 C to 25 C, and 55 C to 25 C. Operating frequency is faster than 600MHz. VCC Operates
PO74G16240A. Pin Configuration. Logic Block Diagram. Truth Table. 74 Series Noise Cancellation GHz Logic DESCRIPTION: FEATURES:
FEATURES:. Patented technology. Operating frequency up to.25ghz with 2pf load. Operating frequency up to 700MHz with 5pf load. Operating frequency up to 300MHz with 5pf load. Operating frequency up to
500MHz TTL/CMOS Potato Chip
FEATURES:. Patent pending technology. Max input frequency > 1GHz. Operating frequency up to 500MHz with 2pf load. Operating frequency up to 450MHz with 5pf load. Operating frequency up to 300MHz with 15pf
PO74G553A. Pin Configuration. Logic Block Diagram. Pin Description. 800MHz Noise Cancellation TTL/CMOS Potato Chip
FEATURES:. Patented technology. Operating frequency up to 800Mz with 2pf load. Operating frequency up to 600Mz with 5pf load. Operating frequency up to 300Mz with 15pf load. Operating frequency up to 150Mz
IDT74FCT257AT/CT/DT FAST CMOS QUAD 2-INPUT MULTIPLEXER
FAST CMOS QUAD 2-INPUT MULTIPLEXER IDT74FCT257AT/CT/DT FEATURES: A, C, and D grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL
FAST CMOS BUFFER/CLOCK DRIVER
FAST CMOS BUFFER/CLOCK DRIVER IDT49FCT80BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
FAST CMOS 8-BIT IDENTITY COMPARATOR
FAST CMOS 8-BIT IDENTITY COMPARATOR IDT74FCT521AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
IDT74FCT540AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES:
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT540AT/CT FEATURES: Low input and output leakage 1µ A (max.) CMOS power levels True TTL input and output compatibility VOH = 3. (typ.) VOL = 0. (typ.) Meets or
3.3V CMOS 16-BIT REGISTER (3-STATE)
3. CMOS 16-BIT REGISTER (3-STATE) 3. CMOS 16-BIT REGISTER (3-STATE) IDT74FCT163374A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; >
HIGH-PERFORMANCE CMOS BUS TRANSCEIVERS
Integrated Device Technology, Inc. HIGH-PERFORMAE CMOS BUS TRANSCEIVERS IDT54/74FCT86A/B IDT54/74FCT863A/B FEATURES: Equivalent to AMD s Am2986-64 bipolar registers in pinout/function, speed and output
3.3V CMOS 20-BIT BUFFER
3. CMOS 20-BIT BUFFER 3. CMOS 20-BIT BUFFER IDT74FCT163827A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model
PO3B10A. Truth Table. High Bandwidth Potato Chip. 2-Channel, 2:1 Mux/DeMux Switch w/ Single Enable GND V DD GND SEL
PO3B0A www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 3.5Gbps or.75ghz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally
FAST CMOS OCTAL LATCHED TRANSCEIVER
FAST CMOS OCTAL LATCHED TRANSCEIVER IDT74FCT543AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
PO3B402A. High Bandwidth Potato Chip OE1 Y1+ Y1- GND SEL3 SEL1 D3- D3+ OE2 Y2+ Y2- Y3+ M3- M3+ OE3 SEL2 OE3 Y3+ Y3- SEL3 OE4 Y4+ Y4- SEL4
FEATURES: Patented technology High signal -3db passing bandwidth at GHz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally suited for low power applications Industrial
3.3V CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER
3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER 3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER IDT74FCT163245A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883,
IDT74FCT163373A/C 3.3V CMOS 16-BIT TRANSPARENT LATCH
3. CMOS 16-BIT TRANSPARENT LATCH 3. CMOS 16-BIT TRANSPARENT LATCH IDT74FCT163373A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20
3.3V CMOS 1-TO-10 CLOCK DRIVER
3. CMOS 1-TO-10 CLOCK DRIVER 3. CMOS 1-TO-10 CLOCK DRIVER IDT74/A FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 350ps (max.) Very low duty cycle distortion < 350ps (max.) High speed: propagation
FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR
FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR IDT74FCT164245T FEATURES: 0.5 MICRON CMOS Technology Bidirectional interface between 3. and 5V buses
54ACT11020, 74ACT11020 DUAL 4-INPUT POSITIVE-NAND GATES
Inputs Are TTL-Voltage Compatible Flow-Through Architecture to Optimize PCB Layout Center-Pin V CC and GND Configurations to Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS)
FAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input and
FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
IDT74FCT2245T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER INDUSTRIL TEMPERTURE RNGE IDT74FCT2245T/CT FETURES: and C grades Low input and output leakage 1μ (max.) CMOS
DIFFERENTIAL ECL-to-TTL TRANSLATOR
DIFFERENTIAL ECL-to-TTL TRANSLATOR FEATURES DESCRIPTION 2.6ns typical propagation delay Differential ECL inputs 24mA TTL outputs Flow-through pinouts Available in 8-pin SOIC package The is a differential
IDT54/74FCT16240AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT16240AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
FAST CMOS BUFFER CLOCK/DRIVER
FAST CMOS BUFFER CLOCK/DRIVER IDT49FCT806BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
FAST CMOS 1-TO-10 CLOCK DRIVER
Integrated Device Technology, Inc. FAST CMOS 1-TO-10 CLOCK DRIVER IDT54/74FCT807BT/CT FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 250ps (max.) Very low duty cycle distortion < 350ps (max.)
FAST CMOS 20-BIT BUFFERS
FAST CMOS 20-BIT BUFFERS IDT54/74FCT16827AT/BT/CT/ET IDT54/74FCT162827AT/BT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement
IDT54/74FCT16374AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC16245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C
SN5414, SN54LS14, SN7414, SN74LS14 HEX SCHMITT-TRIGGER INVERTERS
Operation From Very Slow Edges Improved Line-Receiving Characteristics High Noise Immunity SN5414, SN54LS14, SN5414, SN54LS14...J OR W PACKAGE SN7414... D, N, OR NS PACKAGE SN74LS14... D, DB, OR N PACKAGE
FAST CMOS OCTAL BUFFER/LINE DRIVER
Integrated Device Technology, Inc. FAST CMOS OCTAL BUFFER/LINE DRIVER IDT4/4FCT240/A/C IDT4/4FCT241/A/C IDT4/4FCT244/A/C IDT4/4FCT40/A/C IDT4/4FCT41/A/C FEATURES: IDT4/4FCT240/241/244/40/41 equivalent
IDT74FCT2374AT/CT FAST CMOS OCTAL D REGISTER (3-STATE)
IT74FCT2374AT/CT FAST CMOS OCTAL REGISTER (3-STATE) FAST CMOS OCTAL REGISTER (3-STATE) INUSTRIAL TEMPERATURE RANGE IT74FCT2374AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD FEATURES: DESCRIPTION: DRIVE FEATURES:
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
IDT54/74FCT162244T/AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT162244T/AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
3.3V CMOS 16-BIT 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCHR162245A BUS TRANSCEIVER WITH 3 STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
IDT74ALVC V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS IDT74ALVC16245 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
SN75158 DUAL DIFFERENTIAL LINE DRIVER
SN78 Meets or Exceeds the Requirements of ANSI EIA/TIA--B and ITU Recommendation V. Single -V Supply Balanced-Line Operation TTL Compatible High Output Impedance in Power-Off Condition High-Current Active-Pullup
FAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374T/AT/CT/ET IDT54/74FCT162374T/AT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power
3.3V CMOS 16-BIT DESCRIPTION: 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCH16245A BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC16373A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD IDT74LVCH162374A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015;
PI3C V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
2.5V/3., High Bandwidth, Hot Insertion Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth (>400 MHz) Permits Hot Insertion. Rail-to-Rail, 3. or 2.5V ing 5V I/O
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD IDT74ALVCH162373 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method
SN54ALS00A, SN54AS00, SN74ALS00A, SN74AS00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent 2-input positive-nand
SN54LS06, SN74LS06, SN74LS16 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping
SN54ALS08, SN54AS08, SN74ALS08, SN74AS08 QUADRUPLE 2-INPUT POSITIVE-AND GATES
SNALS0, SNAS0, SN7ALS0, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
SN54LS07, SN74LS07, SN74LS17 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays description These hex buffers/drivers feature
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 VOLT TOLERANT I/O AND BUS-HOLD
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 T TOLERANT I/O AND BUS-HOLD IDT74LVCH162245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C =
PI3CH360. Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch. Features. Description. Block Diagram. Pin Configuration.
Low Voltage, High-Bandwidth, 3-Channel 2:1 Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A DECEMBER 1983 REVISED DECEMBER 2001
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A DECEMBER 1983 REVISED DECEMBER 2001 Convert TTL Voltage Levels to MOS Levels High Sink-Current
AM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
SN54LS245, SN74LS245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
3-State s Drive Bus Lines Directly PNP s Reduce dc Loading on Bus Lines Hysteresis at Bus s Improves Noise Margins Typical Propagation Delay Times Port to Port, 8 ns TYPE IOL (SINK CURRENT) IOH (SOURCE
PI5C3384 PI5C3384C. 10-Bit, 2-Port Bus Switch
PI5C3384 PI5C3384C 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra-low quiescent power (0.2μA typical)
5V/3.3V TTL-TO-DIFFERENTIAL PECL TRANSLATOR
5V/3.3V TTL-TO-DIFFERENTIAL PECL TRANSLATOR FEATURES 3.3V and 5V power supply options 300ps typical propagation delay Low power Differential PECL output PNP TTL input for minimal loading Flow-through pinouts
MC3487 QUADRUPLE DIFFERENTIAL LINE DRIVER
Meets or Exceeds Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. -State, TTL-Compatible s Fast Transition Times High-Impedance Inputs Single -V Supply Power-Up and Power-Down Protection Designed
SN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, SN74S374 OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS
Choice of Eight Latches or Eight D-Type Flip-Flops in a Single Package 3-State Bus-Driving Outputs Full Parallel Access for Loading Buffered Control Inputs Clock-Enable Input Has Hysteresis to Improve
SN54LVC14A, SN74LVC14A HEX SCHMITT-TRIGGER INVERTERS
Typical V OLP ( Ground Bounce) 2 V at V CC = 3.3 V, T A = 25 C s Accept Voltages to 5.5 V Latch-Up Performance Exceeds 100 ma Per JESD
SN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
SN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES SDAS113B APRIL 1982 REVISED DECEMBER 1994 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DUAL 4:1 MUX/DEMUX
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DUAL :1 MUX/DEMUX IDTQS353 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible
PI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON ESD Protection up to 2kV HBM Ultra Low Quiescent Power (0.2μA typical) Ideally suited
PI3V312. Low On-Resistance, 3.3V High-Bandwidth 4-Port, 2:1 Mux/DeMux VideoSwitch. Features. Description. Block Diagram. Pin Configuration S 1 Y A 4
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 1.8V, 2.5V and 3.3V supply
CMOS 16-BIT 3.3V TO 5V LEVEL SHIFTING TRANSCEIVER WITH 3-STATE OUTPUTS 2DIR 48 1OE. 3.3V Port. 5V Port
FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0) VCCA = 2.7V to 3.6V VCCB = 5V ± 0.5V CMOS power
BIDIRECTIONAL TRANSCEIVER
IDT/FCTT/T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER MILITRY ND INDUSTRIL TEMPERTURE RNGES IDT/FCTT/T/CT FETURES: Std.,, and C grades Low input and output leakage µ
CDC337 CLOCK DRIVER WITH 3-STATE OUTPUTS
Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and CMOS-Compatible Outputs Distributes One Clock Input to Eight Outputs Four Same-Frequency
DATASHEET CD4504BMS. Pinout. Features. Functional Diagram. Description. CMOS Hex Voltage Level Shifter for TTL-to-CMOS or CMOS-to-CMOS Operation
DATASHEET CD454BMS CMOS Hex Voltage Level Shifter for TTL-to-CMOS or CMOS-to-CMOS Operation FN3336 Rev. Features Pinout High Voltage Type (2V Rating) Independence of Power Supply Sequence Considerations
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 8-BIT BUS SWITCH
FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible with the 74F245, 74FCT245, and 74FCT245T Low power CMOS proprietary technology
SN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Max Transition Time
SN54ALS273, SN74ALS273 OCTAL D-TYPE FLIP-FLOPS WITH CLEAR SDAS218A APRIL 1982 REVISED DECEMBER 1994
WITH CLEA SDAS2A APIL 2 EVISED DECEMBE 4 Contain Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct-Clear Inputs Individual Data Input to Each Flip-Flop Applications Include: Buffer/Storage
PI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra Low Quiescent Power (0.2µA typical) Ideally suited for notebook applications
SN54ACT00, SN74ACT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
SCAS AUGUST 99 REVISED MAY 99 Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) -µm Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin
PI5C16861 PI5C (25Ω) 20-Bit, 2-Port Bus Switch
PI5C8 PI5C28 (25Ω) Features Near-Zero propagation delay 5Ω or 25Ω switches connect inputs to outputs Direct bus connection when switches are ON 32X384 function with flow through pinout make board layout
Presettable Counter High-Speed Silicon-Gate CMOS
TECHNICAL DATA IN74AC161 Presettable Counter High-Speed Silicon-Gate CMOS The IN74AC161 is identical in pinout to the LS/ALS161, HC/HCT161. The device inputs are compatible with standard CMOS outputs;
SN54HC175, SN74HC175 QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR
Contain Four Flip-Flops With Double-Rail Outputs Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines, Buffer Memory Address Registers, or Drive up to LSTTL Loads True s Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers
SN54ALS688, SN74ALS688 8-BIT IDENTITY COMPARATORS
Compare Two -Bit Words Totem-Pole Outputs () ALS Are Identical to ALS2 Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J)
PI3DBS V High Speed 2 : 4 Differential Mux/Demux
3.3V High Speed 2 : 4 Differential Mux/Demux Features ÎÎ2:4 Differential Multiplexer/Demultiplexer ÎÎBidirectional Operation ÎÎCan be used in à à Single :4 Configuration à à Dual :2 Configuration à à Fan
SN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS032A DECEMBER 1983 REVISED NOVEMBER 1997
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER IDTQS32390 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 16:8 multiplexer function with zero delay 5Ω bidirectional switches
DATASHEET CD4069UBMS. Features. Pinout. Applications. Functional Diagram. Description. Schematic Diagram. CMOS Hex Inverter
DATASHEET CD9UBMS CMOS Hex Inverter FN331 Rev. December 199 Features Pinout High Voltage Types (V Rating) Standardized Symmetrical Output Characteristics CD9UBMS TOP VIEW Medium Speed Operation: tphl,
4-bit counter circa bit counter circa 1990
Digital Logic 4-bit counter circa 1960 8-bit counter circa 1990 Logic gates Operates on logical values (TRUE = 1, FALSE = 0) NOT AND OR XOR 0-1 1-0 0 0 0 1 0 0 0 1 0 1 1 1 0 0 0 1 0 1 0 1 1 1 1 1 0 0 0
PI5C3384 PI5C3384C PI5C32384 (25Ω)
PI5C3384 PI5C3384C PI5C32384 (25Ω) 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay Low noise, 25Ω version (PI5C32384) 5Ω switches connect inputs to outputs (PI5C3384) Direct bus connection
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER IDT2308 FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs
PI3CH360 3-Channel 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching - 0 to 5V switching
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE IDT23S05 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five outputs
PI6CL V/1.5V, 200MHz, 1:4 Networking Clock Buffer. Features. Description. Pin Description
Features High-speed, low-noise, non-inverting 1:4 buffer Maximum Frequency up to 200 MHz Low output skew < 100ps Low propagation delay < 3.5ns Optimized duty cycle 3.3 tolerent input 1.2 or 1.5 supply
PI3USB V, USB 2.0 High-Speed Signal Switch w/ Low THD Channels for Audio Signals. Features. Pin Description. Truth Table
w/ Low THD Channels for Audio Signals Features Bandwidth for USB ports > 1.2Gbps Low THD for Audio ports < 0.02% ESD > 2kV HBM Low I CC = 800µA Wide V CC operating range: 2.7V to 4.2V ±10% Packaging: Pb-free
SN5404, SN54LS04, SN54S04, SN7404, SN74LS04, SN74S04 HEX INVERTERS
Dependable Texas Instruments Quality and Reliability description These devices contain six independent inverters. SN404, SN4LS04, SN4S04, SN404... J PACKAGE SN4LS04, SN4S04... J OR W PACKAGE SN7404...
PI3C V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch. Description. Features. Pin Configuration. Block Diagram.
Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth Operation (>400 MHz) Permits Hot Insertion 5V I/O Tolerant Rail-to-Rail 3.3V or 2.5V Switching 2.5V Supply Voltage
NOT RECOMMENDED FOR NEW DESIGNS LOW-POWER HEX ECL-to-TTL TRANSLATOR
NOT RECOMMENDED FOR NEW DESIGNS LOW-POWER HEX ECL-to-TTL TRANSLATOR FEATURES DESCRIPTION Max. propagation delay of 3.7ns IEE min. of 37mA TTL outputs Extended supply voltage option: VEE = 4.2V to 5.5V
SN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
CD4063BMS. CMOS 4-Bit Magnitude Comparator. Pinout. Features. Functional Diagram. Applications. Description. December 1992
CD3BMS December 99 Features CMOS -Bit Magnitude Comparator Pinout High Voltage Type (V Rating) Expansion to 8,,... N Bits by Cascading Units CD3BMS TOP VIEW Medium Speed Operation - Compares Two -Bit Words
SN54HC377, SN74HC377 OCTAL D-TYPE FLIP-FLOPS WITH CLOCK ENABLE
Eight Flip-Flops With Single-Rail Outputs Clock Enable Latched to Avoid False Clocking Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic
SN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Maximum Transition Time Through
SN54HC00, SN74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description
SN54ALS05A, SN74ALS05A HEX INVERTERS WITH OPEN-COLLECTOR OUTPUTS
SN54ALS05A, SN74ALS05A HEX INVERTERS WITH OPEN-COLLECTOR OUTPUTS SDAS190A APRIL 1982 REVISED DECEMBER 1994 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard
QUICKSWITCH BASICS AND APPLICATIONS
QUICKSWITCH GENERAL INFORMATION QUICKSWITCH BASICS AND APPLICATIONS INTRODUCTION The QuickSwitch family of FET switches was pioneered in 1990 to offer designers products for high-speed bus connection and