PLC INTERFACE With Leakage Current and Interference Voltage Suppression
|
|
|
- Augustine Morton
- 6 years ago
- Views:
Transcription
1 PLC INTERFACE With Leakage Current and Interference Voltage Suppression PLC- SO46 1. PLC INTERFACE, the super thin, plug-in, and flexible modular interface system with a user-friendly jumper system, now offers an extended range of relay interfaces for applications in which high levels of interference voltage occur on the control side (coil). Application Problem: Long Cables This problem is familiar to almost every practical expert: relays do not drop again on a "0" signal or even pick up in extreme cases due to interference voltages on the control cables. This is often caused by long and/ or poorly-laid cables. AC voltages are thus coupled from neighboring cables, which frequently exceed V. Conventional coupling relays become overloaded with these undefined signals and do not demonstrate clear switching behavior. Application Problem: Leakage Currents From AC Outputs The same effect occurs if electronic AC outputs produce leakage currents. This is often the case for many AC voltage initiators and PLC AC output cards. Leakage currents of several ma can also adversely affect the operation of conventional relays, which remain "suspended". Solution: PLC- SO46 With Integrated Filter 6.2 mm (0.244 in.) and mm (0.551 in.) PLC...SO46 versions with integrated filter are now available for applications in or networks with high levels of interference voltage. This multi-level filter circuit considerably reduces interference in the control circuit and thus contributes to safe signal transmission. The PLC- SO46 is only supplied as a basic terminal block with filter; a relay or optocoupler is not fitted. For possible components, please refer to the Technical Data. All Other PLC Advantages The PLC- SO46 series also features the other advantages of the PLC range: Super thin 6.2 mm (0.244 in.) and mm (0.551 in.) design Either universal SPDT or sensor version for input signals User-friendly, vibration-resistant, and time-saving jumper system Integrated input and protection circuit Relay or optocoupler can be quickly replaced using an engagement lever Either screw or spring-cage connection technology Phoenix Contact GmbH & Co. KG 3225 Blomberg, Germany Phone Fax Local Contact:
2 2. Technical Data: Universal Range 0 mm (3.150 in.) PLC-B /21/SO46 or Connection data * * PLC-BSC /21/SO46 basic terminal block for plug-in REL-MR-60DC miniature relay, PLC-BSP /21/SO46 basic terminal block for plug-in REL-MR-60DC miniature relay, Gold contact PLC-BSC-0UC/21/SO46 PLC-BSC-230UC/21/SO46 PLC-BSP-0UC/21/SO46 PLC-BSP-230UC/21/SO Nominal input voltage Permissible range (with reference to and T u = 20 C [6 F]) Typical input current at (50 Hz/60 Hz) Typical response time/release time at 4 V DC 1 V DC V AC 0 V AC 7/ ma./ ma 7 ms/20 ms 7 ms/20 ms Single contact, 1 Form C contact Single contact, 1 Form C contact AgSnO Ag alloy, hard gold-plated /DC 30 V AC/36 V DC V AC/DC 0 mv 6 A 50 ma On request 50 ma ma 1 ma 0 W 1.2 W 20 W - W - 23 W - 40 W VA - 0 mw 0 µw 0% ED 2 x 7 cycles IEC /IEC A/DIN VDE 01, degree of pollution 3, Surge Voltage Category III, DIN EN 50 17/VDE 0160 (in relev. parts), DIN VDE 06-1: 196-, reinforced insulation for I/O Phoenix Contact page 2 of 7
3 for DC output for AC output Connection data * * * The electrical data is determined by the optocoupler. PLC-B /21/SO46 OPT-60DC/24DC/2, OPT-60DC/4DC/0 or PLC-BSC /21/SO46 basic terminal block for plug-in OPT-60DC miniature optocoupler, PLC-BSP /21/SO46 basic terminal block for plug-in OPT-60DC miniature optocoupler, Suitable plug-in miniature optocoupler PLC-BSC-0UC/21/SO46 PLC-BSC-230UC/21/SO46 PLC-BSP-0UC/21/SO46 PLC-BSP-230UC/21/SO46 OPT-60DC/4DC/0 OPT-60DC/24DC/ Nominal input voltage Permissible range (with reference to ) Switching level Typical input current at (50 Hz/60 Hz) Typical switch-on time at Typical switch-off time at (refer to catalog for derating curve) Output switching Output wiring Voltage drop on limiting continuous current Leakage current in the off state Maximum phase displacement (inductive load) Maximum load value I 2 x t (t = ms) 0 signal ("L") x 0.4 x 7/ ma./ ma 6 ms 6 ms ms ms OPT-60DC/4DC/0 OPT-60DC/24DC/2 4 V DC 30 V DC 253 V AC 3 V DC 3 V DC 24 V AC 0 ma 3 A 0.75 A 15 A ( ms) 30 A ( ms) 2-wire floating ground 2-wire floating ground 2-wire floating ground Protection against Protection against RCV circuit polarity reversal, polarity reversal, Surge voltage Surge voltage protection protection < 1 V DC < 200 mv DC < 1 V DC < 1 ma cosϕ = A 2 s 2.5 kv, 50 Hz, 1 minute 0% ED IEC /IEC A/DIN VDE 01, degree of pollution 2, Surge Voltage Category III Phoenix Contact page 3 of 7
4 3. Technical Data: Sensor Version for Input Signals 13 BB 0 mm (3.150 in.) PLC-B /1/SEN/SO46 or Connection data * * PLC-BSC /1/SEN/SO46 basic terminal block for plug-in REL-MR-60DC miniature relay, PLC-BSP /1/SEN/SO46 basic terminal block for plug-in REL-MR-60DC miniature relay, Gold contact PLC-BSC-0UC/1/SEN/SO46 PLC-BSC-230UC/1/SEN/SO46 PLC-BSP-0UC/1/SEN/SO46 PLC-BSP-230UC/1/SEN/SO Nominal input voltage Permissible range (with reference to and T u = 20 C [6 F]) Typical input current at (50 Hz/60 Hz) Typical response time/release time at 4 V DC 1 V DC V AC 0 V AC 7/ ma./ ma 7 ms/20 ms 7 ms/20 ms Single contact, 1 Form A contact Single contact, 1 Form A contact AgSnO Ag alloy, hard gold-plated /DC 30 V AC/36 V DC V AC/DC 0 mv 6 A 50 ma On request 50 ma ma 1 ma 0 W 1.2 W 20 W - W - 23 W - 40 W VA - 0 mw 0 µw 0% ED 2 x 7 cycles IEC /IEC A/DIN VDE 01, degree of pollution 3, Surge Voltage Category III, DIN EN 50 17/VDE 0160 (in relev. parts), DIN VDE 06-1: 196-, reinforced insulation for I/O Phoenix Contact page 4 of 7
5 for DC output 13 BB for AC output 13 BB 0 mm (3.150 in.) Connection data * * * The electrical data is determined by the optocoupler. PLC-B /1/SEN/SO46 OPT-60DC/24DC/2, OPT-60DC/4DC/0 or PLC-BSC /1/SEN/SO46 basic terminal block for plug-in OPT-60DC miniature optocoupler, PLC-BSP /1/SEN/SO46 basic terminal block for plug-in OPT-60DC miniature optocoupler, Suitable plug-in miniature optocoupler PLC-BSC-0UC/1/SEN/SO46 PLC-BSC-230UC/1/SEN/SO46 PLC-BSP-0UC/1/SEN/SO46 PLC-BSP-230UC/1/SEN/SO46 OPT-60DC/4DC/0 OPT-60DC/24DC/ Nominal input voltage Permissible range (with reference to ) Switching level Typical input current at (50 Hz/60 Hz) Typical switch-on time at Typical switch-off time at (refer to catalog for derating curve) Output switching Output wiring Voltage drop on limiting continuous current Leakage current in the off state Maximum phase displacement (inductive load) Maximum load value I 2 x t (t = ms) 0 signal ("L") x 0.4 x 7/ ma./ ma 6 ms 6 ms ms ms OPT-60DC/4DC/0 OPT-60DC/24DC/2 4 V DC 30 V DC 253 V AC 3 V DC 3 V DC 24 V AC 0 ma 3 A 0.75 A 5 A ( ms) 30 A ( ms) 2-wire floating ground 2-wire floating ground 2-wire floating ground Protection against Protection against RCV circuit polarity reversal, polarity reversal, Surge voltage Surge voltage protection protection 1 V DC 200 mv DC < 1 V AC < 1 ma cosϕ = A 2 s 2.5 kv, 50 Hz, 1 minute 0% ED IEC /IEC A/DIN VDE 01, degree of pollution 2, Surge Voltage Category III Phoenix Contact page 5 of 7
6 4. Technical Data: Universal SPDT Version mm (3.150 in.) PLC-BSC 21-21/SO46 that can be fitted with a relay Housing width mm (0.244 in.) REL-MR-1DC/21-21 or REL-MR-1DC/21-21AU Connection data * * PLC-BSC /21-21/SO46 basic terminal block for plug-in REL-MR-1DC miniature relay, Gold contact PLC-BSC-0UC/21-21/SO46 PLC-BSC-230UC/21-21/SO46 REL-MR-1DC/21-21AU REL-MR-1DC/ Nominal input voltage Permissible range (with reference to and T u = 20 C [6 F]) Typical input current at (50 Hz/60 Hz) Typical response time/release time at 4 V DC 1 V DC V AC 60 V AC 6/7 ma.5/ ma 7 ms/ ms 7 ms/ ms REL-MR-1DC/21-21 REL-MR-1DC/21-21AU Single contact, 2 Form C contacts Single contact, 2 Form C contacts AgNi AgNi + 5 µ Au /DC 30 V AC/36 V DC 5 V AC/DC 0 mv 6 A 50 ma On request 50 ma ma 1 ma 0 W 1.2 W 0 W - 60 W - 44 W - 60 W VA - 50 mw 0 µw 0% ED 3 x 7 cycles IEC /IEC A/DIN VDE 01, degree of pollution 3, Surge Voltage Category III, DIN EN 50 17/VDE 0160 (in relev. parts), DIN VDE 06-1: 196-, reinforced insulation for I/O Phoenix Contact page 6 of 7
7 5. Technical Data: Universal Version for High Continuous Load Currents 0 mm (3.150 in.) PLC-BSC 21HC/SO46 that can be fitted with a relay Housing width mm (0.244 in.) REL-MR-1DC/21HC Connection data * * PLC-BSC 21HC/SO46 basic terminal block for plug-in REL-MR-1DC miniature relay, PLC-BSC-0UC/21HC/SO46 PLC-BSC-230UC/21HC/SO REL-MR-1DC/21HC Nominal input voltage Permissible range (with reference to and T u = 20 C [6 F]) Typical input current at (50 Hz/60 Hz) Typical response time/release time at 1 ) Input wiring depends on the type 4 V DC 1 V DC V AC 60 V AC 6/7 ma.5/ ma 7 ms/ ms 7 ms/20 ms REL-MR-1DC/21HC Single contact, 1 Form C contact AgNi /DC V AC/DC (6) A 2) 16 A 0 ma 240 (4) W 2) 5 W 4 W 50 W 0 W 2500 (1500) VA 2) 1.2 W 0% ED 3 x 7 cycles IEC /IEC A/DIN VDE 01, degree of pollution 3, Surge Voltage Category III, DIN EN 50 17/VDE 0160 (in relev. parts), DIN VDE 06-1: 196-, reinforced insulation for I/O 2 )The values in brackets are for connections. If connections are jumpered, the values in brackets are valid. TNR: /03/05 Phoenix Contact Phoenix Contact page 7 of 7
316 PHOENIX CONTACT. RIF-1 for miniature and solid-state relays Page 334. RIF-2 for industrial relays Page 342. RIF-3 for octal relays Page 346
314 PHOENIX CONTACT PHOENIX CONTACT 315 RIF-0 for miniature and solid-state relays Page 328 RIF-1 for miniature and solid-state relays Page 334 RIF-2 for industrial relays Page 342 RIF-3 for octal relays
38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
Relay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1
Features 7S.12...5110 7S.14...0220/0310 7S.16..0420 Relay module with forcibly guided contacts 7S.12 with 2 pole (1NO + 1 NC) 7S.14 with 4 pole (2 NO + 2 NC and 3 NO + 1 NC) 7S.16 with 6 pole (4 NO + 2
38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct
MasterINTERFACE 39 Series - Relay interface modules
Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
mm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi
34 Series - Slim electromechanical PCB relays 6 A Features 34.51 Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw or screwless sockets 1 Pole
EMD-FL-C-10. Current Monitoring Relay. Data Sheet. Functions. Structure 08/2004
Current Monitoring Relay Data Sheet 08/2004 Functions Structure Current monitoring of direct and alternating current in 1-phase networks with settable threshold values, starting override and response delay
QUINT-PS-24DC/24DC/10
QUINT-PS-24/24/10 QUINT - converter, primary switched mode, input: 24 V, output: 24 V /10 A INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The QUINT - converter 24 V/10 A converts the voltage
58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
Passive Current Transducers for Sinusoidal Alternate Currents From A/0...5 A MCR-SLP-1/5-UI-0(-SW)
Passive Current Transducers for Sinusoidal Alternate Currents From 0... A/0...5 A (-SW) Passive current transducer without power supply Measuring range A and 5 A AC, reconnectable Available with threshold
EMD-FL-3V Phase Voltage Monitoring Relay INTERFACE. Data Sheet. Description
3-Phase Voltage Monitoring Relay INTERFACE Data Sheet PHOENIX CONTACT - 03/2006 Description Voltage monitoring in 3-phase networks with settable threshold values, settable response delay, monitoring of
Output of three-phase motors at 50 Hz and 400 V
RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements
Contents XR U 1 D 12 G. Poles 1 = 1PDT 2 = 2PDT. Type D = Standard relay S = Octocoupler (solid-state) H = High current
Control Relays and Timers Relay Product Overview.2 Contents Description Standard Terminal Block Relays............ OptoCoupler Terminal Block Relays......... High Current Terminal Block Relays.........
40 Series - Miniature P.C.B. Relays A
..4..4..4 40 Series - Miniature P.C.B. Relays 8-0 - 6 A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient
EMD-FL-3V-400. Electronic monitoring relay for voltage monitoring in three-phase networks. INTERFACE Data sheet _en_03. 1 Description.
Electronic monitoring relay for voltage monitoring in three-phase networks INTERFACE Data sheet 102110_en_03 1 Description PHOENIX CONTACT - 09/2009 Features Increasingly higher demands are being placed
IB IL 24/230 DOR 4/W-PC IB IL 24/230 DOR 4/W-PC-PAC
IB IL 24/230 DOR 4/W-PC IB IL 24/230 DOR 4/W-PC-PAC Inline Terminal With Four Relay Changeover Contacts Data Sheet 6530B 03/2003 $ $ ) The IB IL 24/230 DOR 4/W-PC and IB IL 24/230 DOR 4/W-PC-PAC only differ
IB IL 24 PWR IN/PS IB IL 24 PWR IN/PS-PAC
IB IL 24 PWR IN/PS IB IL 24 PWR IN/PS-PAC Inline Power Terminal for the System Voltages U M, U S, U L, U ANA Data Sheet 694500 05/2003 $ ' " # ) Features Items IB IL 24 PWR IN/PS and IB IL 24 PWR IN/PS-PAC
PSR-SCP- 24DC/ESD/5X1/1X2/300
Extract from the online catalog PSR-SCP- 24DC/ESD/5X1/1X2/300 Order No.: 2981428 Safety relay with adjustable delay time 0-300 s, screw version Commercial data EAN 4017918975227 Pack 1 pcs. Customs tariff
Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
PHOENIX CONTACT - 06/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103383_en_00 1 Description PHOENIX CONTACT - 06/2008 Features QUINT POWER power supply units highest system
QUINT-PS AC/24DC/40
Power supply unit INTERFACE Data sheet 102315_en_02 1 Description PHOENIX CONTACT 2010-04-23 Features QUINT POWER power supply units for plant and special engineering reliably start heavy loads with high
60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
Relay modules, Relay sockets, Plug relays
, Relay sockets, Plug relays General information Relay input side (coil) Single relays housed in slim, rail mounting enclosures taking up the minimum of space. Multiple relays (up to 24) in compact rail
Miniature circuit-breakers S 280 UC series. System pro M. Technical data
Technical data 11 Robbie Rd. / Avon, MA 02322 T:(508)513-1000 F:(508)513-1100 70 Ernest St. / Providence, RI 02905 T:(401)781-7100 www.controllerservice.com System pro M Prior to connection of aluminum
PHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103129_en_01 PHOENIX CONTACT - 05/2008 1 Description QUINT POWER power supply units highest system availability
MINI MCR-SL-UI-f(-SP)
Configurable Analog Frequency Transducer INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The configurable analog frequency transducer MINI MCR-SL-UI-f(-SP) is used to convert analog standard
Pluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different rated control supply voltages U S : DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2
Current monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
QUINT-PS/ 1AC/24DC/20
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data sheet 103129_en_04 1 Description PHOENIX CONTACT - 02/2010 Features QUINT POWER power supply units Maximum system
Compact size 2 Form A and 2 Form A 1 Form B 35A power relays for energy management and industrial equipment. Conditions. Mirror contact mechanisms
Compact size and 3A power relays for energy management and industrial equipment HE-S RELAYS New TYPICAL APPLICATIONS Photovoltaic power generation systems (Solar inverter) Uninterruptible Power Supplies
Pluggable interface relays CR-U Universal relays
Data sheet Pluggable interface relays CR-U Universal relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
The power in relays and timers since Catalogue
The power in relays and timers since 1954 2012 Catalogue PCB relays Industrial relays Relay interface modules Sockets and accessories Timers Monitoring relays Energy meters Surge protection devices Industrial
Current monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
QUINT-PS/ 3AC/24DC/10
Primary-switched power supply with SFB technology, 3 AC, output current 10 A INTERFACE Data sheet 103131_en_01 1 Description PHOENIX CONTACT - 09/2009 Features QUINT POWER power supply units Maximum system
Measuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
Classification Enclosure rating Contact form Model Standard Flux protection SPST-NO G6RL-1A
PCB Relay Low-profile power relay with maximum switching of 8 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm. RoHS
Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
relais A mark Relay modules
Relay modules relais Introduction to relay technology Modular DIN rail mounted relays Plug-in DIN rail mounted relays Multiple chassis mounted relays Timer relays The relay modules offer features such
DEK-OV- 12DC/ 24DC/ 3
Extract from the online catalog DEK-OV- 12DC/ 24DC/ 3 Order No.: 2941387 The illustration shows the version DEK-OV- 24DC/24DC/3 Power optocoupler terminal block, input: 12 V DC, output: 3-30 V DC/3 A,
Miniature Power Relay MSR
V23061 PCB relay for DC voltage, neutral, monostable Features Used as a switching element for electrical separation between low-power control circuits and power load circuits With 8 mm clearance and creepage
PHOENIX CONTACT
Selective circuit breaker CLIPLINE Data sheet 100464_en_05 PHOENIX CONTACT 2009-11-17 1 Description The electronic circuit breaker, which has a design width of just 12.5 mm, selectively protects all 24
ABB 1. Multifunctional three-phase monitoring relays. CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. Features. Approvals. Marks.
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 2CDC 251 050 F0t08 CM-MPS.31 2CDC 251 051 F0t08 CM-MPS.41 R/T: yellow LED - relay status, timing F1: red LED - fault message F2: red LED - fault
QUINT-PS/ 3AC/24DC/40
Primary-switched power supply unit with SFB technology, 3 AC, output current 40 A INTERFACE Data sheet 103133_en_00 1 Description PHOENIX CONTACT - 07/2009 Features QUINT POWER power supply units Maximum
MINI-PS AC/24DC/1.3
Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics
Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
CONTA-ELECTRONICS. Relay systems
CONTA-ELECTRONICS Relay technology continues to play a large role in the reliability of industrial control and automation solutions. Because of their thin design, relay couplers are suitable for use in
CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. UL 508, CAN/CSA C22.2 No.14 GL GOST CB scheme CCC
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage as well as phase unbalance
MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
Switching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay
relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);
Three-phase monitoring relays CM-PFE and CM-PFE.2
Data sheet Three-phase monitoring relays CM-PFE and CM-PFE.2 The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251
Classification Enclosure rating Contact form Contact material
PCB Relay Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm.
DPDT MY2N-D2 MY2IN-D2 --- (DC only) 4PDT MY4N-D2 MY4IN-D PDT (bifurcated) MY4ZN-D2 MY4ZIN-D2 --- With built-in CR
General-purpose Relay MY New model Versatile and Function-filled Miniature Power Relay for Sequence Control and Power Switching Applications Models with lockable test buttons now available. Many variations
PCB relay for DC voltage, polarized, monostable or bistable
V23042 PCB relay for DC voltage, polarized, monostable or bistable Features Universally applicable in the most varied circuit functions in the field of telecommunications and small signal technology Versatile
Current monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
ABB NEW. Multifunctional three-phase monitoring relays. CM-MPS.23 and CM-MPS.43 Data sheet. Features J. Approvals. Marks.
2CDC 251 052 F0t08 CM-MPS.23 2CDC 251 053 F0t08 CM-MPS.43 - relay status, timing - fault message - fault message Adjustment of the tripping delay t V Adjustment of the threshold value for overvoltage 6
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
MINI-PS AC/2X15DC/1
MII-PS-100-240AC/2X15DC/1 Power supply unit ITERFACE Data sheet 100299_en_04 1 Description PHOEIX COTACT - 2010-10-20 Features MII POWER is the extremely slim power supply unit with constructional widths
Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23
Data sheet Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23 The three-phase monitoring relay CM-MPS.23 monitors the phase parameters phase sequence, phase failure, over- and undervoltage
Interface relays and optocouplers Product group picture
Interface relays and optocouplers Product group picture /1 ABB Catalog Electronic Products and Relays 2013/2014 2CDC 1 004 C0209 Interface relays and optocouplers Table of contents Interface Relays and
6mm Interface Relays RV8 Series
6mm Interface Relays RV8 Series PRODUCT DESCRIPTION Electromechanical C1D2 (screw terminal) Solid State (spring clamp) IDEC 6mm interface relays provide a compact solution for general purpose relay requirements.
Song Chuan / Relay Catalog 507
07 eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. 2A 277VAC DPDT. Low profile.7 and high insulation system class High CTI material &
Relay systems. Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC
Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC IRC relay couplers and MFR-IRCP timing relays embody a new strategy for 6.2 mm coupling relays. Our five different relay versions provide
Ordering Information. PCB Relay G6RL. Model Number Legend: Low-profile power relay with maximum switching of 10 A
PCB Relay G6RL Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) IEC 60947-5-1, AC-15, DC13 Clearance and creepage distance: 10
888-1AC-F-C 888-1AC-F-V 888-1AC-F-S (SPNO) 888-2AC-F-C 888-2AC-F-V 888-2AC-F-S (DPNO) 888N-2AC-F-C 888N-2AC-F-V 888N-2AC-F-S (DPNO)
Type List Standard Type eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. Low profile.7mm and high insulation system Class. High CTI material
MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
Current monitoring relays CM-SRS.1 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
Contactors. Series C137, C163, C164, C165 Single pole contactors for battery voltages Catalogue B60.en
Contactors Series C7, C6, C6, C65 Single pole contactors for battery voltages Catalogue B.en Contactors for battery voltages C7, C6, C6, C65 Series With its proven line of C7 through C65 Series contactors
Three-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
Model Number Structure
General-purpose Relay MK-I/-S Electromechanical Relays Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long
MINI MCR-SL-UI-I-LP-NC
2-way isolation amplifier Data sheet 105263_en_02 PHOENIX CONTACT 2013-12-13 1 Description The configurable 2-way isolation amplifiers are used to electrically isolate, convert and filter standard signals.
Electronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
Operating Instructions
Level and Pressure Operating Instructions VEGATOR 620, 621, 622 max. 0 10 min. 0 10 on VEGATOR 622! 6 7 8 9 10 11 12 13 14 in out Contents Contents Safety information... 2 Note Ex area... 2 1 Product description
Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal
SPST Slim Power Relay for A switching Slim -mm width and miniature size. (20.08 12. mm) High switching capability A (20 VAC and VDC), and high contact reliability by crossbar-twin contact. Low power consumption
For Immediate Delivery call KMParts.com at (866)
Contents 9/1 Page Description SN4 switched-mode power supply units 9/2 GW4 power supply units 9/3 GD4 power supply units 9/4 Basic Units, Accessories 9/5 Technical data 9/6 Dimensions 9/12 9/2 Description
General-purpose Relay
General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical
ABB 1. Multifunctional three-phase monitoring relays. CM-MPN.52, CM-MPN.62 and CM-MPN.72 Data sheet. Features. Approvals. Marks.
2CDC 251 054 F0t08 CM-MPN.52 2CDC 251 055 F0t08 CM-MPN.62 2CDC 251 056 F0t08 CM-MPN.72 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage
DZD 92 L. Wiring diagram. Time domains. Function. Dimensional drawing. Indicators. Accessories
DZD 92 L Multi-Function - Multi-domain time relay Mono voltage 8 Functions Setting range 0.05 s to 100 h subdivided into 7 time domains 1 immediate-action and 1 time contact or 2 time contacts (adjustable)
OMRON MK-I / -S RELAY
Issued April 0 0 DATA SHEET OMRON MK-I / -S RELAY Based on OMRON Datasheet General-purpose Relay MK-I/-S 0 Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks
Three-phase monitoring relays
2CDC 251 046 F0t08 Features Monitoring of three-phase mains for phase sequence, phase failure, phase unbalance Threshold value for phase unbalance adjustable as absolute value Tripping delay can be adjusted
This data sheet is only valid in association with the IL SYS INST UM E user manual.
Inline counter terminal, version for extreme conditions, 1 counter input, 1 control input, 1 output, 24 V DC, 500 ma Data sheet 106148_en_03 PHOENIX CONTACT 2015-11-04 1 Description The terminal is designed
Relays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view
66 Series - Power relays 30 A Features 66.22 66.82 2 Pole Changeover (DPDT) 30 A Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil
MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
PHOENIX CONTACT - 09/2009
Electronic miniature circuit-breaker CLIPLINE Data sheet 03906_en_0 PHOENIX CONTACT - 09/2009 Description The EC-E... electronic miniature circuit-breaker selectively protects all 24 V DC load circuits
Device circuit breakers Selective power distribution: branch out, individual adaptation, modular extension
Power & Signal Quality TRABTECH Device circuit breakers Selective power distribution: branch out, individual adaptation, modular extension Interference-free mains supply and signal transmission A constant
ABB NEW. Three-phase monitoring relays. CM-PVS.31 and CM-PVS.41 Data sheet. Features J. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 042 F0t08 CM-PVS.31 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage Threshold values for over- and undervoltage are adjustable
Low profile safety relay with forcibly guided double contacts FEATURES. Relay height, 14.5mm. 4a2b
Low profile safety relay with forcibly guided double contacts SFN4D RELAY 3.3 33.0 FEATURES Relay complies with EN 020, Type B. Polarized magnet system with snap action function Tolerance ±0.3 mm Weight