Civil Product Update. Derricke Gray, Product Manager Bentley Civil Americas
|
|
- Ashley Dalton
- 6 years ago
- Views:
Transcription
1 Civil Product Update Derricke Gray, Product Manager Bentley Civil Americas Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated
2 Agenda Civil Update o Where we are at today. Civil Futures o Beyond SELECTseries Bentley Bentley Systems, Incorporated
3 Civil Update Where we are today Bentley Bentley Systems, Incorporated
4 Bentley Civil Releases SELECTseries2 Rail products Bentley Product Stream OpenRoads V8i Product Lines Bentley RailTrack (BRT) Power RailTrack (PRT) Power Overhead Line (PROL) Common Modelling Solution SELECTseries3 SELECTseries3 MR1 Incremental enhancments and improvments Sub Surface Utility Engineering SELECTseries3 MR2 Incremental enhancments and improvments Model Interoprability improvements Synchronised Road and Rail product release OpenRail adoption of dynamic modeling technology SUE / SUDA Incremental enhancments SELECTseries4 SELECTseries4 MR1 SELECTseries4 MR2 with CONNECT Services Synchronised Road and Rail product release CONNECTION Client Windows 10 Incremental enhancements Q3/ Q1/Q Q3/ Q1/Q Q3/ Q1/ Bentley Systems, Incorporated
5 SELECTseries 4 (MR 1) General Product Enhancements Bentley Bentley Systems, Incorporated
6 New Product Deliverables Bentley RailTrack SELECTseries 4 (OpenRail) Brings Rail (track layout and maintenance) products onto same platform as Road. SUDA Extends on SUE to Provide Storm / Sanitary Analysis capability Draws on Haestad analysis and integrates with StormCAD (includes 100 inlet with OpenRoads) / Civil Storm / SewerCAD / SewerGems depending on licences Bentley Descartes SELECTseries 5 ( ). Bentley Map SELECTseries 4 ( ) Bentley Systems, Incorporated
7 Horizontal Geometry Enhancements Chord Definition based arcs are supported Bentley Systems, Incorporated
8 Horizontal Geometry Enhancements Best fit regression on B-spline elements provides improved performance and the creation of spiral based alignments. Support the import of following Transition Spirals: Bloss Biquadratic Cosine Sinusoid Half-Bloss Half-Biquadratic Half-Cosine Half-Sinusoids Bentley Systems, Incorporated
9 Horizontal Geometry Enhancements Improved tool tips from geometry to show what the geometry belongs to (or where it originated from) Bentley Systems, Incorporated
10 Terrain Model Enhancements A new explicitly defined <Boundary> option has been added to the terrain model edge conditions Bentley Systems, Incorporated
11 Terrain Model Enhancements Complex terrain models are now allowed when the base terrain models boundaries do not overlap Bentley Systems, Incorporated
12 Terrain Model Enhancements Create Terrain Model Boundary tool has been added. Extract Graphic - Will allow the creation of a graphical boundary element that reflects the current limits of the triangulation of the given terrain model. Add Boundary Adds a boundary internally (no graphic) to the terrain using the current limits of triangulation. Add Ruled Boundary Does both of the above creates a graphical boundary element and then rules that graphical element to the boundary of the terrain Bentley Systems, Incorporated
13 Modelling Enhancements Template library organizer now allows copy of edited linear templates in a DGN back to the library (previously only worked with corridor templates). Linear Template are now able to be renamed in Quick Properties. Linear Templates have been extended to always include external control points for improved modelling accuracy that was previously only available using full corridor modeling Bentley Systems, Incorporated
14 Modelling Enhancements Template drop description has been added to the corridor objects dialog. Design Stage artifacts, Top Mesh and Template Geometry, persists rules regardless if they are on/off in the Design Stage settings. This is true for both corridors and linear templates. This results in multiple benefits, such as: Target Aliasing seeks top mesh of Corridors and Linear Templates instead of nearest component, resulting in faster processing. You can now drape 2D elements directly on the corridor without having to create a terrain Bentley Systems, Incorporated
15 Modelling Enhancements When an End Condition seeks something other than a surface (e.g. linear elements via Horizontal, Vertical, or Both), the elements must be added as a Corridor Reference in order to populate the Target Alias dialog. This results in much faster processing since the software doesn t have to search all the elements in the file. It only searches for and lists the elements that are listed as Corridor References. Optimized performance when the base alignment contains B-splines, or when targeting B-splines elements as corridor point controls and feature definition constraints. B-Splines are normally created when you copy parallel geometry that contains spirals Bentley Systems, Incorporated
16 i-model and icm enhancements i-model presentation of the civil model has been improved so Items Browser closely reflects the civil model represented by Project Explorer when a civil application is present. This makes for easier navigation and reporting in the i-model. Exporting the.icm.dgn now includes the graphical representation of the civil data being exported Bentley Systems, Incorporated
17 i-model and icm enhancements WYSIWYG Publish Publish Displayed Attachments Only Excellent way to make the files smaller Bentley Systems, Incorporated
18 Interoperability Enhancements When using the File > Publish i-model option to publish an i-model, you can now include the civil data (an example of this would be publishing an i-model for the OpenRoads mobile application). In order to do this, you will need to set the following CFG variable: CIVIL_iMODEL_INCLUDE_ICM=1 *** Publish Design Models only CIVIL_iMODEL_INCLUDE_ICM=2 *** Publish Terrain Models only CIVIL_iMODEL_INCLUDE_ICM=3 *** Publish both models If variable is not set then no civil data will be saved to i-model Bentley Systems, Incorporated
19 Project Explorer Project Explorer has the ability to zoom to an element or object Bentley Systems, Incorporated
20 RSS feeds RSS feeds Bentley Systems, Incorporated
21 Subsurface Utility Design and Analysis (SUDA) Subsurface Utility Engineering License StormCAD License (100 Inlets Included) Conflict Management SUE Attribution 3D Modeling of all underground Integrated with OpenRoads Storm/Sanitary Hydraulic Analysis and Design Hydrology Bentley Systems, Incorporated
22 Bentley Subsurface Utility Design and Analysis Integrated with OpenRoads Extends SUE 3D modeling of all underground assets, existing or proposed. Hydraulic Design of Storm and Sanitary Utilities. Advanced Conflict Detection / Conflict Management Bentley Systems, Incorporated
23 SUDA A variety of bug fixes for Subsurface Utility Engineering (SUE) tools Added hydraulic calculations engines as follows: StormCAD equivalent functionality for drainage models up to 100 inlets included in the OpenRoads license CivilStorm, SewerCAD and SewerGEMS license available by menu activation. Additional license charges will apply if you have not purchased the appropriate license. Added import capabilities for: STSW files (StormCAD, CivilStorm, SewerCAD and SewerGEMS) Submodels (StormCAD, CivilStorm, SewerCAD and SewerGEMS) SWMM LandXML MicroDrainage Bentley Systems, Incorporated
24 SUDA Added export to: Submodels (StormCAD, CivilStorm, SewerCAD and SewerGEMS) SWMM LandXML MicroDrainage GEOPAK Drainage InRoads Storm and Sanitary New Layout commands Place Lateral Place Gutter (hydraulic definition) Place Polygon (for Catchments, LIDS, hydraulic pond definitions) Bentley Systems, Incorporated
25 SUDA New polygon feature definition type for Catchments, LIDs and hydraulic pond definitions. Added Predefined Flex Tables for hydraulic reporting Added tool to create real text from Hydraulic View annotations Bentley Systems, Incorporated
26 Legacy Product Enhancements GEOPAK - Optimization loading file list of GPK files from ProjectWise. InRoads - Vertical Annotation Enhancement. Ability to only Annotate Curve-less VPIs with a leader, station, and elevation Added the ability to add station and elevation to Curve Data Bentley Systems, Incorporated
27 SELECTseries 4 (MR 2) General Product Enhancements Bentley Bentley Systems, Incorporated
28 / General Enhancements Delivery of Bentley CONNECTION Client Bentley Systems, Incorporated
29 CONNECT(ed) What does it all mean? Bentley Bentley Systems, Incorporated
30 Bentley Systems, Incorporated
31 Bentley Systems, Incorporated
32 Bentley Systems, Incorporated
33 CONNECTED Enterprise Bentley Systems, Incorporated
34 SELECTSeries 4 Maintenance Release 2 General Enhancements Support for Windows 10. Updated product versions Subsurface Utilities Design and Analysis (SUDA) Subsurface Utility Engineering (SUE) Bentley Descartes Bentley Map Bentley Systems, Incorporated
35 SELECTSeries 4 Maintenance Release 2 General Enhancements Support for Reality Mesh 3mx file Bentley Systems, Incorporated
36 SELECTSeries 4 Maintenance Release 2 General Enhancements Enhanced Support for Mobile workflows through ICM and OpenRoads Navigator Bentley Systems, Incorporated
37 SELECTSeries 4 Maintenance Release 2 Modeling Enhancements Ability to reclassify Components in End Area Volume tool to Unsuitable Material(s). Added Import/Export capabilities for the values assigned for the End Area Volume tool. Added ability to delete Dynamic Cross Sections by right mouse button clicking in Dynamic section and selecting Delete Dynamic Cross Section View. Increased the amount of vertices that can be included in complex shape for clipping Bentley Systems, Incorporated
38 SELECTSeries 4 Maintenance Release 2 Survey Enhancements The copy command no longer creates a survey linear feature or point by default. The graphic created would be just a MicroStation graphic. To enable the <Copy> tool to create a survey linear feature or point set the following configuration variable: CIVIL_SURVEY_RETAIN_SURVEY_ON_COPY= Bentley Systems, Incorporated
39 Civil Futures Beyond SELECTseries Bentley Bentley Systems, Incorporated
40 What is OpenRoads? OpenRoads provides a common dynamic modeling technology for GEOPAK, InRoads, MXROAD and PowerCivil for Country. OpenRoads technology offers immersive interaction of Survey Terrain modeling Geometry Corridor modeling Dynamic cross sections Civil cells Design intent Design-time visualization Subsurface Utilities Bentley Systems, Incorporated
41 Bentley Civil Evolution GEOPAK InRoads MX Quantities Quantities Quantities Plan Preparation Plan Preparation Plan Preparation Drainage Drainage Drainage Earthworks Earthworks Earthworks Road Design Road Design Road Design Alignment Alignment Alignment Survey Survey Survey Terrains Terrains Terrains Bentley Systems, Incorporated
42 Bentley Civil Evolution (SELECTseries 2) GEOPAK InRoads MX Quantities Quantities Quantities Plan Preparation Plan Preparation Plan Preparation Drainage Drainage Drainage Earthworks Earthworks Earthworks Road Design Road Design Road Design Alignment Geometry Alignment Geometry Alignment Geometry Survey Data Acquisition Survey Data Acquisition Survey Data Acquisition Terrains Terrains Terrains Bentley Systems, Incorporated
43 Bentley Civil Evolution (SELECTseries 3) GEOPAK InRoads MX Quantities Quantities Quantities Plan Preparation Plan Preparation Plan Preparation Drainage SUE Drainage SUE Drainage SUE Earthworks Road Design Modeling / Earthworks Earthworks Road Design Modeling / Earthworks Earthworks Road Design Modeling / Earthworks Alignment Geometry Alignment Geometry Alignment Geometry Survey Bentley Survey Survey Bentley Survey Survey Bentley Survey Terrains Terrains Terrains Terrains Terrains Terrains Bentley Systems, Incorporated
44 Bentley Civil Evolution (SELECTseries 4) GEOPAK InRoads MX Quantities Quantities Quantities Plan Preparation Plan Preparation Plan Preparation Drainage SUE/SUDA Drainage SUE/SUDA Drainage SUE/SUDA Earthworks Road Design Modeling / Earthworks Earthworks Road Design Modeling / Earthworks Earthworks Road Design Modeling / Earthworks Alignment Geometry Alignment Geometry Alignment Geometry Survey Bentely Survey Survey Bentley Survey Survey Bentley Survey Terrains Terrains Terrains Terrains Terrains Terrains Bentley Systems, Incorporated
45 Bentley Civil Evolution GEOPAK InRoads MX Quantities Quantities Quantities Plan Preparation Plan Preparation Plan Preparation Quantities Drainage Earthworks Road Design Alignment SUE/SUDA Drainage SUE/SUDA Drainage SUE/SUDA Modeling / Earthworks Geometry Earthworks Road Design Alignment Modeling / Earthworks Geometry Earthworks Road Design Alignment Modeling / Earthworks Geometry Model Analytics Enhanced Point Cloud Capability SUE/SUDA Modeling / Earthworks Geometry Civil Documentation Center Extended Data Model Attribution Survey Bentely Survey Survey Bentley Survey Survey Bentley Survey Terrains Terrains Terrains Terrains Terrains Terrains Reality Modeling Bentley Survey Terrains High End Visualisation Bentley Systems, Incorporated
46 OpenRoads Designer Connect Edition Roads InRoads GEOPA OpenRoads Designer CONNECT Edition K MX Bentley Systems, Incorporated
47 OpenRoads Designer CONNECT Edition Deliver infrastructure projects more efficiently with OpenRoads
48 Bentley Bentley Systems, Incorporated What s the SAME?
49 What s the Same? Geometry Terrains Modeling Super SUE/SUDA Etc. Significant time and resource investment in taking what we had and making it work Bentley Systems, Incorporated
50 OpenRoads Designer CONNECT Edition Bentley Systems, Incorporated
51 Bentley Bentley Systems, Incorporated What s NEW?
52 OpenRoads Designer CONNECT Edition News and Announcements Introductory videos Direct access to LEARNING titles for each application Bentley Systems, Incorporated
53 OpenRoads Designer CONNECT Edition New User Friendly Customizable Interface Bentley Systems, Incorporated
54 Feature Definitions Additional Feature Types Alignments Corridors Superelevation Linear Templates Surface Templates Etc. Enhanced Feature Definitions Ease of categorization Improved Sorting, Search and Navigation Bentley Systems, Incorporated
55 Feature Symbologies What something is and what something looks like are separate things. Identifies Annotation Group Allows segregation of individual elements types Bentley Systems, Incorporated
56 NEW Annotation Capabilities Annotation for: Plan Profiles Cross Sections Automatic Bulk Annotation for Sheeting Annotation Manager Edit Preview Associative Annotation for Automatic Updates Bentley Systems, Incorporated
57 Civil Annotation Bentley Systems, Incorporated
58 OpenRoads Designer CONNECT Edition Enhanced Civil Model Presentation Improved Civil Model object sorting naming search Navigation Greater categorization and enhancing on previous feature definitions with new types for Alignments Corridors Linear Templates Area Templates Improved sorting, search and navigation Bentley Systems, Incorporated
59 New Drawing Production Capabilities Plan / Profile Cross Sections Superelevation Bentley Systems, Incorporated
60 New Drawing Production Capabilities MicroStation Connect OpenRoads Designer Bentley Systems, Incorporated
61 Cross Section Sheeting Bentley Systems, Incorporated
62 NEW Superelevation Engine Includes all legacy functionality XML Based Fully Customizable Formulas and Tables Key Stations User Defined Inputs Automatic lane creation and application to corridor Can be modified by Average Joe Creation and Editing Dialog Logging Bentley Systems, Incorporated
63 NEW Superelevation Model Superelevation in a Managed Model (like profiles and cross sections) Editable Integrates with sheet production tools for plans Bentley Systems, Incorporated
64 Significant Performance Gains 64 Bit Multi-processor Enabled Bentley Systems, Incorporated
65 Modeling Performance Gains - Side by Side comparison Bentley Systems, Incorporated
66 Bentley Systems, Incorporated
67 OpenRoads CONNECT Edition Bentley Systems, Incorporated
68 LumenRT Overview One button export Seconds to create LiveCube 3D immersive world High fidelity realism Full Digital Nature Authoring OpenRoads Designer Bentley Systems, Incorporated LumenRT LiveCube bb
69 Bentley Systems, Incorporated
70 Companion Capabilities/Products ContextCapture & Descartes OpenRoads ConstructSim OpenRoads CONNECT Edition ConceptStation OpenRoads Navigator OpenRoads Designer gint Civil Tools LumenRT Bentley Systems, Incorporated
71 gint Civil Integration Bentley Systems, Incorporated
72 Companion Capabilities/Products ContextCapture & Descartes OpenRoads ConstructSim OpenRoads CONNECT Edition ConceptStation OpenRoads Navigator OpenRoads Designer gint Civil Tools OpenBridge Modeler LumenRT Bentley Systems, Incorporated
73 Bentley Systems, Incorporated
74 Companion Capabilities/Products ContextCapture & Descartes OpenRoads ConstructSim OpenRoads CONNECT Edition ConceptStation OpenRoads Navigator OpenRoads Designer gint Civil Tools OpenBridge Modeler Point Tools SUE/SUDA LumenRT Bentley Systems, Incorporated
75 OpenRoads Designer CONNECT Edition Limited Access A pre-release made available for feedback, evaluation and planning, by invitation only. Early Access A pre-release is made available for feedback, evaluation, and planning, open to all Users. What happens next? Bentley Community will host Early Access program SIG meeting will introduce OpenRoads Designer Learn Content made available to aid the program General Access A release of all capabilities of a product or service, and made available to all Users. Regular Updates Bentley Product Stream OpenRoads V8i Product Lines SELECTseries4 MR2 with CONNECT Services Q116 Q216 Q316 Q416 Q117 Q Bentley Systems, Incorporated
76 Bentley Systems, Incorporated
77 OpenRoads Designer Connect Edition InRoads OpenRoads GEOPAKDesigner MX CONNECT Edition Bentley Systems, Incorporated
78 Thank You Have a great day! Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated
OpenRail SELECTseries 4 - Managing Geometry and Corridor Modeling
2015 Bentley Systems, Incorporated OpenRail SELECTseries 4 - Managing Geometry and Corridor Modeling Robert Nice Senior Application Engineer Agenda: Why work in SELECTseries 4? Moving to SELECTseries 4
More informationAdvantages of Implementing StormCAD for OpenRoads (SUDA)
Advantages of Implementing StormCAD for OpenRoads (SUDA) Robert Garrett, Bentley Systems Inc. WWW.BENTLEY.COM I 2015 Bentley Systems, Incorporated What is Subsurface Utility Design and Analysis? What is
More informationSHRP2 R15B Identifying and Managing Utility Conflicts
SHRP2 R15B Identifying and Managing Utility Conflicts SHRP2 Peer Exchange Webinar February 5, 2019 Welcome and Agenda Introduction and Opening Remarks Overview and Status of R15B Product IAP State Challenges
More informationProgramme TOC. CONNECT Platform CONNECTION Client MicroStation CONNECT Edition i-models what is comming
Bentley CONNECT CONNECT Platform MicroStation CONNECT Edition 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Programme TOC CONNECT Platform CONNECTION Client MicroStation
More information3D Modeling Demonstration
2014 Bentley Systems, Incorporated 3D Modeling Demonstration Derricke Gray, Product Manager Bentley Civil Americas ESS Statewide Rollouts: 3D Modeling Engineering Content Management (ProjectWise) 2 WWW.BENTLEY.COM
More informationWhat s New in Bentley Civil SELECTseries 3
What s New in Bentley Civil SELECTseries 3 Introducing OpenRoads Technology Ian Rosam Product Manger, Bentley Civil 1 WWW.BENTLEY.COM 2013 2013 Bentley Bentley Systems, Incorporated Bentley Civil/Transportation
More information2014 Bentley Systems, Incorporated. Bentley Rail Track SELECTseries2 Maintenance Release
2014 Bentley Systems, Incorporated Bentley Rail Track SELECTseries2 Maintenance Release Topics Look back What's in the latest release What's next 2 WWW.BENTLEY.COM 2014 Bentley Systems, Incorporated Previous
More informationBentley Civil Update and Direction
www. bentley. com Bentley Civil Update and Direction Mike Wilson Director, Software Development, Bentley Civil The cast of characters this year Bentley Civil Mike Wilson that would be me Director, Software
More informationBentley Rail Design Update. Robert Nice Bentley UK
Bentley Rail Design Update Robert Nice Bentley UK The Global Rail Market is now worth 125 billion / year 59% Rolling stock 30% Infrastructure 11% Systems technology 2 WWW.BENTLEY.COM Regional Trends Source:
More informationBentley Rail Track Update
Bentley Rail Track Update Robert Nice Bentley Systems UK Recent Past and Near Future Today, I will discuss recent enhancements to Bentley Rail Track. Some of these enhancements you may be very familiar
More informationBentleyuser.dk Årsmøde 2010 Nordic Civil 2010
Bentleyuser.dk Årsmøde 2010 Nordic Civil 2010 8.-10. November 2010, Munkebjerg Hotel, Vejle Workshop - X9 Resurfacing and Overlay Tools InRoads V8i Presenter: Joe Waxmonsky, P.E., Bentley Systems USA Bentley
More informationPractice Workbook. Cross Sections: Creating, Annotating, and Volumes
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationWhat's the Latest with InRoads Storm & Sanitary SS1?
What's the Latest with InRoads Storm & Sanitary SS1? Joe Waxmonsky, Bentley Civil Why implement S&S? To avoid this: 2 WWW.BENTLEY.COM Single-source it 3 WWW.BENTLEY.COM StormCAD reads S&S files! StormCAD
More informationBentley s MicroStation Hydraulic Design/Analysis Software
Bentley s MicroStation Hydraulic Design/Analysis Software October 17, 2018 Update on SUDA Development from 2017 SUDA Implementation Schedule SUDA/StormCAD Tools Management Tools Scenarios vs Alternatives
More informationBest Practice: Corridor Modeling
2014 Bentley Systems, Incorporated Best Practice: Corridor Modeling Presented by: Joe Waxmonsky PE, Bentley Civil 2 WWW.BENTLEY.COM 2014 Bentley Systems, Incorporated Best Practice: Corridor Modeling Agenda
More informationCHAPTER 15. Cross Section Sheets. None, except batch processing of an input file.
CHAPTER 15 Cross Section Sheets 15.1 Introduction Objectives Project Manager Menu Bar Application Learn the procedures for laying out cross section sheets. Cross Section Sheets None, except batch processing
More informationOpenRoads Designer Best Practices Project Management
OpenRoads Designer Best Practices Project Management Presented by: Ian Rosam, Director Civil Product Management, Bentley Systems, Inc. 1 WWW.BENTLEY.COM 2017 Bentley Systems, Incorporated 2017 Bentley
More informationOpenBridge Modeler: What is it and how can I use it today?
2015 Bentley Systems, Incorporated OpenBridge Modeler: What is it and how can I use it today? Steve Willoughby, Senior Application Engineer Agenda: Introducing OpenBridge Modeler OpenBridge Modeler Features
More informationX11-Using the New Civil Geometry Tools
X11-Using the New Civil Geometry Tools Joe Waxmonsky, PE Bentley Civil 2010 Bentley Systems, Incorpo ora 2010 Bentley Systems, Incorpora 2010 Nordic Civil Geometry 2 WWW.BENTLEY.COM Roads and Bridges 2010
More informationOhio Department of Transportation, VBA Documentation
Contents 1.1 Current Versions... 2 1.2 Overview... 3 1.3 Supporting Files and Standards... 4 1.3.1 ODOT_Drainage.cel... 4 1.3.2 ODOT2013.ddb... 5 1.4 ODOT_StormSewerPlan2013.mvba... 6 1.4.1 Mode: Place
More informationAny student may retake any class at any time and for any reason without additional charge.
1 ENVISIONCAD ABOUT US Guaranteed Training 1 ENVISIONCAD ABOUT US EnvisionCAD is a provider of training solutions for MicroStation and select InRoads products. We also use our expertise to assist organizations
More informationOpenRoads Best Practice - Civil Cells
OpenRoads Best Practice - Civil Cells Presented by: Ian Rosam, Director Civil Product Management, Bentley Systems, Inc. 1 WWW.BENTLEY.COM 2017 Bentley Systems, Incorporated 2017 Bentley Systems, Incorporated
More informationStream Design: From GEOPAK to HEC-Ras
10 Stream Design: From GEOPAK to HEC-Ras OBJECTIVES Provide you with a general understanding of GEOPAK Cross Section Reports and their capability to generate geometric information for the HecRas program.
More informationPractice Workbook. Cross Sections: Creating, Annotating, and Volumes. SELECTseries 4 ( ) or newer
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand self study. The explanations and demonstrations are provided by the instructor in the classroom, or
More informationGEOPAK V8i SELECTseries 1, Road 2
GEOPAK V8i SELECTseries 1, Road 2 Ohio Department of Transportation October, 2012 Ohio Department of Transportation GEOPAK Road Training Guide for MicroStation V8i SELECTseries 1, October, 2012 The information
More informationFull Contents. Essentials, Workbook
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production Essentials...
More informationFull Contents. InRoads Essentials
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production Essentials...
More information2014 NCLUG Summer Conference. Workshops
Workshops [CM Workshop] NCDOT Corridor Modeler (CM) Delta Training (3 Day) [SS2] Oak Thammavong, NCDOT Creating & Customizing templates presented by NCDOT, Oak Thammavong. The Advanced OpenRoads Technology
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationDesign, Drawing and Sheet Composition
Design, Drawing and Sheet Composition Tools, Technologies and Concepts 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated 2 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated
More information2010 Bentley Systems, Incorporated. Point Clouds in MicroStation V8i
Point Clouds in MicroStation V8i LiDAR Challenges Working with many forms of LiDAR (light detection and ranging) Laser Scanning Airborne LiDAR Mobile Mapping Systems All forms produce large data sets that
More information3D DESIGN IN ALTERNATIVE DELIVERY Innovation, Savings, and Supplementing TxDOT Resources
3D DESIGN IN ALTERNATIVE DELIVERY Innovation, Savings, and Supplementing TxDOT Resources Brief History 2 Conveying the Design Old Way Reviewing Changes Schematic Intent Design Change 3 4 Conveying the
More informationNew Features in TerraScan. Version 013.xxx
New Features in TerraScan Terrasolid Workshop ILMF 2013 Denver, CO 14 February 2013 Darrick Wagg GeoCue Corporation 9668 Madison Blvd., Suite 202 Madison, AL 35758 +1 (256) 461-8289 support@geocue.com
More informationCHAPTER 7: ALIGNMENT
QUALITY MANAGEMENT 7.1 Description CHAPTER 7: ALIGNMENT Creation of an additional alignment file and a summary of the total lane miles per lift (rounded to the nearest hundredth) for the given material
More informationGeospatial Keynote Nordic Civil konference I Vejle Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated
Geospatial Keynote Nordic Civil konference 07.11.2016 I Vejle 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Introduction Johannes Klick Senior Support Manager
More informationSubdivision Cross Sections and Quantities
NOTES Module 11 Subdivision Cross Sections and Quantities Quantity calculation and cross section generation are required elements of subdivision design projects. After the design is completed and approved
More informationAECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationCorridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment: (1) Alignments > Create
More informationRadius Return Select this option to annotate the elevations along the radius return of the intersection.
ODOT_IntersectionDetail.mvba Application Name: Current version: Required MicroStation Version: Required GEOPAK Version: Video Documentation ODOT_IntersectionDetail.mvba V11.07.15 MicroStation XM or V8i
More informationHow to Design and Submit a DOT Project with Civil 3D
11/30/2006-5:00 pm - 6:30 pm Room:San Polo - 3503 (ISD Campus) How to Design and Submit a DOT Project with Civil 3D Seth Cohen - ProSoft NET CV35-2 This lab will delve into the workflows and processes
More informationDisplay and Draw Features
CHAPTER 7 Display and Draw Features 7.1 Overview Feature / Function Tool Display or draw DTM features, such as contours, triangles, lattices, voids, islands, etc. DTM Menu Bar Load > DTM Features GEOPAK
More informationPlease See NEXT PAGE for Class Selection
SoCal Bentley Bash 2019 - January 11th - FRIDAY REGISTRATION FORM PLEASE PRINT - Use a separate form for each person registering For Admin Use Only *First Name *Last Name Company/School* *Address *City
More informationFull Contents. Survey V8.08 Essentials
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads Survey... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production
More informationAutoCAD Civil 3D 2013 South African Country Kit
AutoCAD Civil 3D 2013 South African Country Kit Contents 1 General... 3 1.1 Introduction from the author and creator... 3 1.2 Overview... 4 2 Drawing Settings... 8 2.1 Edit Drawing Settings... 8 3 Layers...
More informationCorridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors 2018-2019 To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment from scratch: (1)
More informationBC Ministry of Transportation and Infrastructure Civil 3D Terms of Reference
BC Ministry of Transportation and Infrastructure Civil 3D Terms of Reference BC Supplement to TAC Section 1280 [January 2017 - Provisional] BLANK PAGE Contents 1280.01 General... 1 1280.02 Terms of Reference:
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationLD20558-L Parking Lots with AutoCAD Civil 3D Corridors
LD20558-L Parking Lots with AutoCAD Civil 3D Corridors Steven Hill CAD Manager, Civil Designer / Geosyntec Consultants.NET Application Developer / Red Transit Consultants, LLC Learning Objectives Discover
More informationModule 10. Assemblies and Corridors. Objectives
NOTES Module 10 Assemblies and Corridors In this module, you learn to work with assemblies and corridors in AutoCAD Civil 3D. Corridor models are used to represent road designs in Civil 3D. An assembly
More informationIntroducing Bentley Map VBA Development
Introducing Bentley Map VBA Development Jeff Bielefeld Session Overview Introducing Bentley Map VBA Development - In this session attendees will be provided an introductory look at what is required to
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationMick Hodgson. Tekla Structures, Tekla Versions And Software Evolution
Mick Hodgson 2018 Tekla Structures, Tekla Versions And Software Evolution Tekla Version 15 Main Points Unlimited Models Quick modelling tools Fast drawing production Tube CNC Tekla Version 15 Main Points
More informationAutoCAD Civil 3D 2009 ESSENTIALS
AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how
More informationOpenPlant. Hayley Brown Industry Consultant, Bentley Plant Bentley Systems, In
OpenPlant Hayley Brown Industry Consultant, Bentley Plant tley Systems, In co Introduction What is OpenPlant? OpenPlant is the branding for the next generation of applications and tools based on ISO 15926
More informationSD DEPARTMENT OF TRANSPORTATION OFFICE OF ROAD DESIGN
SD DEPARTMENT OF TRANSPORTATION OFFICE OF ROAD DESIGN CADD Procedures Manual Section B - Design 1 Table of Contents InRoads Master Workflow... 3 Getting Started... 3 Open InRoads Files... 3 Create and
More informationSustaining Water Infrastructure using Bentley Water Solutions
Sustaining Water Infrastructure using Bentley Water Solutions February 2010. Slavco Velickov, PhD Water Industry Director, EMEA Agenda 1.Bentley at a Glance 2.Bentley Water Solutions 3.Water Products Overview
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationBentleyuser.dk ÅRSMØDE 2011 Vejle,
2011 Bentley Systems, Incorporated Bentleyuser.dk ÅRSMØDE 2011 Vejle, 14.+15.11.2011 Bentley OpenPlant Update Carsten Gerke Senior Sales Director Bentley Plant EMEA Today s Agenda 2010 Bentley Systems,
More informationverticals products support services training community corporate Saving DGN to DWG (with AutoCAD paperspace and viewport compatibility)
Page 1 of 6 Login Site Map Print Store Search Select Locale Quick Links verticals products support services training community corporate Support Support Tools KnowledgeBase TechNotes and FAQs Remote Support
More informationPractice Workbook. Create 2D Plans from 3D Geometry in a Civil Workflow
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationResurfacing and Overlay Made Easy with New Overlay Tools in Roadway Designer
Resurfacing and Overlay Made Easy with New Overlay Tools in Roadway Designer Joe Waxmonsky, Bentley Civil 2 WWW.BENTLEY.COM Why Overlay? Why Overlay? Accommodate wedging / leveling Milling Widening Crown
More informationPrasanth. Lathe Machining
Lathe Machining Overview Conventions What's New? Getting Started Open the Part to Machine Create a Rough Turning Operation Replay the Toolpath Create a Groove Turning Operation Create Profile Finish Turning
More informationIntroduction to ANSYS DesignModeler
Lecture 4 Planes and Sketches 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations
More informationCreating a Sketchbook in Sketchbook Designer based on a photo and Reusing it in AutoCAD
Autodesk Design Suite 2012 Autodesk SketchBook Designer 2012 Tip Guides Creating a Sketchbook in Sketchbook Designer based on a photo and Reusing it in AutoCAD In this section you will learn the following:
More informationGetting Started. with Easy Blue Print
Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationAGENDA: BIM Introduction. Large-Scale Value. Value for Architects. Conceptual BIM / Small BIM. All-Out BIM. BIM Introduction
From Conceptual BIM to All-Out BIM Brent Mauti, Architect BARCH, OAA, MAA, SAA, AAA, MRAIC, NCARB, AIA, LEED-AP CH2M HILL CANADA ARCHITECTS INC. brent.mauti@ch2m.com Member of the Manitoba Association
More informationInventor 2013 What s New!
Reference 2011070 28 th March 2012 Guide by Luke Davenport Inventor 2013 What s New! A brief snapshot of the most exciting new features in the 2013 release, as selected by CADline. The complete list of
More informationGenerations Automatic Stand-Alone Lace By Bernie Griffith Generations Software
We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A
More informationLooking into the Future Bentley Systems, Incorporated
OPTRAM Looking into the Future Universal Truisms of Rail Too much of: Not Enough of: Infrastructure Problems Maintenance Budget 2 WWW.BENTLEY.COM Highest Priority Issues How Do You: 1) Know where to work
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationA Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No
More informationQuick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
More informationCBCL Limited Sheet Set Manager Tutorial 2013 REV. 02. CBCL Design Management & Best CAD Practices. Our Vision
CBCL Limited Sheet Set Manager Tutorial CBCL Design Management & Best CAD Practices 2013 REV. 02 Our Vision To be the most respected and successful Atlantic Canada based employeeowned firm, delivering
More informationImproving efficiency of water utilities: practical examples
Improving efficiency of water utilities: practical examples Slavco Velickov, PhD - Water Industry Director EMEA Geospatial Forum, Rotterdam, 23-26 May 2016 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated
More informationAECOsim Building Designer. Quick Start Guide. Chapter A06 Creating a Master Model Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter A06 Creating a Master Model 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Creating a Master Model...3 References... 4
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More informationEstimated Time Required to Complete: 45 minutes
Estimated Time Required to Complete: 45 minutes This is the first in a series of incremental skill building exercises which explore sheet metal punch ifeatures. Subsequent exercises will address: placing
More informationRRR Design & Modeling with the FDOT Civil 3D State Kit
RRR Design & Modeling with the FDOT Civil 3D State Kit Mike Racca - CADD Applications Development Specialist Production Support Office CADD 605 Suwannee St - MS 40, Tallahassee, Florida 32399 Session Objectives:
More informationOptimizing Digital Drawing Files and BIM Models for Measurement and Estimating
Optimizing Digital Drawing Files and BIM Models for Measurement and Estimating Simon Lovegrove MRICS, AAIQS - Exactal CM4228 Drawing file formats issued for measurement and estimating purposes range from
More informationA selection of files of content to give the out of the box experience of a local product. Local standards in drawing production, design and reporting
A t CAD Civil AutoCAD Ci il 3D 2011 UK and Ireland Country Kit Jack Strongitharm Application Engineer What is a Country Kit? A selection of files of content to give the out of the box experience of a local
More informationPublication Number spse01510
Sketching Publication Number spse01510 Sketching Publication Number spse01510 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle
More informationCADD & Civil 3D User Guidelines
THURSTON COUNTY PUBLIC WORKS DEPARTMENT Design and Construction Division CADD & Civil 3D User Guidelines V4.0_06_10_15 1 THURSTON COUNTY PUBLIC WORKS DEPARTMENT DESIGN AND CONSTRUCTION DIVISION CADD &
More informationARC HYDRO GROUNDWATER TUTORIALS
ARC HYDRO GROUNDWATER TUTORIALS Subsurface Analyst Creating ArcMap cross sections from existing cross section images Arc Hydro Groundwater (AHGW) is a geodatabase design for representing groundwater datasets
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationWhat s New In SA CHAPTER
What s New In SA CHAPTER 1 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity
More information670 10/26/17 SSD: 07/14/16, 09/16/17 Page 1 of 6
SSD: 07/14/16, 09/16/17 Page 1 of 6 S P E C I A L P R O V I S I O N Section MISCELLANEOUS INCIDENTALS Item.822 - GNSS Construction Inspection Equipment Description SAMPLE PROJECT 12345 10/30/17 1.1 Work
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationAUTOCAD CIVIL 3D 2016
SMALL SCALE AND MICRO IRRIGATION SUPPORT PROJECT Training Manual on AUTOCAD CIVIL 3D 2016 for irrigation professionals SMIS RPMU, Hawassa January 25-30/2017 (Prepared by Abdo Kedir) CONTENTS 1 CIVIL 3D
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationAgenda 2 Bentley Overview. Solutions. Bridges. Buildings 4 Bentley Overview
Agenda Attendees will learn about how to improve efficiencies by transferring AutoPLANT, PlantSpace, PDS and 3D CAD models to engineering analysis piping and structural models. A demonstration will be
More informationVectorworks Architect
SAMPLE by Jonathan Pickup third edition written with version 2011 Vectorworks Architect Tutorial Manual Table of Contents Introduction... iii How to Use this Manual... iii New Ways of Drawing... iv Vectorworks
More informationCreo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling
Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...
More informationWholly Sheets, Batman - Plotting in AutoCAD Civil 3D Seth Cohen Advanced Technologies Solutions Inc.
Seth Cohen Advanced Technologies Solutions Inc. CV637 Are you confused about how to plot all the different views (plan, profile, and cross sections) in AutoCAD Civil 3D software? Then this class is for
More informationThis document describes the new features of MTpro version as compared to MTpro
New features in MTpro 3.6 This document describes the new features of MTpro version 3.6.0.0 as compared to MTpro 3.5.0.0. Table of contents 1 General... 2 2 New contents... 3 2.1 New CAD models... 3 2.2
More information