Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
|
|
|
- Adrian Richards
- 5 years ago
- Views:
Transcription
1 Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical 10Hz at MHz & MHz; Typical 10Hz at MHz & MHz; Typical 10Hz at 100MHz 10mA typical current consumption on 15pF load, 3.3V supply MHz 20mA typical current consumption on 15pF load, 3.3V supply 100MHz Select (-S) version: 100% Phase Noise Test Passed on Typical Phase and +/- 1 ppm Frequency C Very low rms phase jitter@ MHz: Typical 10Hz - 1MHz Typical 12kHz - 80MHz Very low rms phase jitter@ MHz: Typical 10Hz - 1MHz Typical 12kHz - 80MHz Very low rms phase jitter@ 100MHz: Typical 10Hz - 1MHz Typical 12kHz - 80MHz Typical 2520, SMD1409, DIP14 package Pin Definition on 2520, SMD1409, DIP14 Package Pin No# Pin Definition 1 OE 2 GND 3 OUTPUT 4 VDD * By default, the OE is pulled up to VDD, Oscillation output ON 1
2 2520 Package Dimension(mm) 2520 Package PCB Pad Layout(mm) 2
3 SMD1409 Package and PCB Pad Layout Dimension(inch/(mm)) 3
4 DIP14 Package Dimension(mm) 4
5 Electrical Specifications General Electrical Specifications Symbol Description Conditions Min Typical Max Unit Vdd Supply Voltage (3.3V) AS318-B parts V I 3.3V, 15pF Load, ma osc Supply Current (3.3V) MHz 3.3V, 15pF Load, ma MHz 3.3V, 15pF Load, ma 100MHz Output Wave Form CMOS Output Level 0 10%Vdd Output Level 1 90%Vdd Rise/Fall 4 ns Startup time ms Operating Temperature C Frequency Tolerance ppm CL Load 15 pf Clock Duty Cycle % Oscillation output ON OE=Level H (0.7 Vdd VIH VDD) or OPEN is selected. High impedance OE=Level L (VIL 0.3 Vdd) is selected Note: It is recommended that the power supply be filtered with a 0.1uF capacitor. 5
6 PhaseNoise Phase Noise MHz, 3.3V Typical 1Hz -70 dbc/hz 10Hz -103 dbc/hz 100Hz -130 dbc/hz 1KHz -159 dbc/hz 10KHz -165 dbc/hz 100KHz -167 dbc/hz 1MHz -168 dbc/hz Phase Noise MHz, 3.3V 1Hz -70 dbc/hz 10Hz -101 dbc/hz 100Hz -129 dbc/hz 1KHz -158 dbc/hz 10KHz -166 dbc/hz 100KHz -166 dbc/hz 1MHz -166 dbc/hz Phase Noise MHz, 3.3V 1Hz -59 dbc/hz 10Hz -90 dbc/hz 100Hz -115 dbc/hz 1KHz -144 dbc/hz 10KHz -164 dbc/hz 100KHz -167 dbc/hz 1MHz -168 dbc/hz Phase Noise MHz, 3.3V 1Hz -58 dbc/hz 10Hz -90 dbc/hz 100Hz -115 dbc/hz 1KHz -144 dbc/hz 10KHz -163 dbc/hz 100KHz -165 dbc/hz 1MHz -167 dbc/hz Phase Noise 100MHz, 3.3V 1Hz -58 dbc/hz 10Hz -88 dbc/hz 100Hz -118 dbc/hz 1KHz -146 dbc/hz 10KHz -163 dbc/hz 100KHz -168 dbc/hz 1MHz -169 dbc/hz 6
7 RMS Jitter RMS Jitter MHz, 3.3V Typical 10Hz - 1MHz ps 12KHz 80MHz ps RMS Jitter MHz, 3.3V Typical 10Hz - 1MHz ps 12KHz 80MHz ps RMS Jitter MHz, 3.3V Typical 10Hz - 1MHz ps 12KHz 80MHz ps RMS Jitter MHz, 3.3V Typical 10Hz - 1MHz ps 12KHz 80MHz ps RMS Jitter 100MHz, 3.3V Typical 10Hz - 1MHz 0.2 ps 12KHz 80MHz ps 7
8 Accusilicon AS318-B MHz 8
9 Accusilicon AS318-B MHz 9
10 Accusilicon AS318-B MHz 10
11 Accusilicon AS318-B MHz 11
12 Accusilicon AS318-B MHz 12
13 13
14 14
15 List of available part numbers Part No# Frequency Supply Voltage Package AS318-B MHz 3.3V 2520 AS318-B MHz 3.3V 2520 AS318-B MHz 3.3V 2520 AS318-B MHz 3.3V 2520 AS318-B MHz 3.3V 2520 AS318-B S MHz 3.3V 2520 AS318-B S MHz 3.3V 2520 AS318-B S MHz 3.3V 2520 AS318-B S MHz 3.3V 2520 AS318-B-100S-1 100MHz 3.3V 2520 Part No# Frequency Supply Voltage Package AS318-B MHz 3.3V SMD1409 AS318-B MHz 3.3V SMD1409 AS318-B MHz 3.3V SMD1409 AS318-B MHz 3.3V SMD1409 AS318-B MHz 3.3V SMD1409 AS318-B S MHz 3.3V SMD1409 AS318-B S MHz 3.3V SMD1409 AS318-B S MHz 3.3V SMD1409 AS318-B S MHz 3.3V SMD1409 AS318-B-100S-2 100MHz 3.3V SMD1409 Part No# Frequency Supply Voltage Package AS318-B MHz 3.3V DIP14 AS318-B MHz 3.3V DIP14 AS318-B MHz 3.3V DIP14 AS318-B MHz 3.3V DIP14 AS318-B MHz 3.3V DIP14 AS318-B S MHz 3.3V DIP14 AS318-B S MHz 3.3V DIP14 AS318-B S MHz 3.3V DIP14 AS318-B S MHz 3.3V DIP14 AS318-B-100S-3 100MHz 3.3V DIP14 *Select (-S) version: 100% Phase Noise Test Passed on Typical Phase and +/- 1 ppm Frequency C 15
CARDINAL COMPONENTS. Operating Conditions: Description Min Max Unit
Standard Package Options Series CPP Part Numbering Example: CPP C 1 L Z - A5 B6 - XXXXXX TS CPP C 1 L Z A5 SERIES CPP OUTPUT C = CMOS T = TTL Specifications: PACKAGE STYLE 1 = Full Size 4 = Half Size 5
PL600-27T CLK0 XIN/FIN 1. Xtal Osc CLK1 XOUT CLK2. Low Power 3 Output XO PIN ASSIGNMENT FEATURES DESCRIPTION CLK2 GND VDD FIN CLK0 SOT23-6L
FEATURES 3 LVCMOS outputs with OE tri -state control Low current consumption: o
PL XIN CLK XOUT VCON. Xtal Osc. Varicap. Low Phase Noise VCXO (17MHz to 36MHz) PIN CONFIGURATION FEATURES DESCRIPTION BLOCK DIAGRAM
FEATURES PIN CONFIGURATION VCXO output for the 17MHz to 36MHz range Low phase noise (-130dBc @ 10kHz offset at 35.328MHz) LVCMOS output with OE tri-state control 17 to 36MHz fundamental crystal input Integrated
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
VCXO OSCILLATORS. Package # VC20 (VCXO) Package # VC08. Test Circuit #2 (CMOS) (VCXO) Package # VC29 (SMD VCXO) Package # VC30 (SMD VCXO)
6 7.62 ± 0.20 5.0 0.8 3.20 5.0 Typ. 9.0 ±.5 2.8 max 6.8 max 0.8 6.8 5.3 max 5. Many applications, such as telecom switching systems, local area networks (LAN) and video applications, voltage controlled
Low Phase Noise, LVPECL VCXO (for 150MHz to 160MHz Fundamental Crystals) FEATURES. * Internal 60KΩ pull-up resistor
0.952mm VDD QB PL586-55/-58 FEATURES DIE CONFIGURATION Advanced non multiplier VCXO Design for High Performance Crystal Oscillators Input/Output Range: 150MHz to 160MHz Phase Noise Optimized for 155.52MHz:
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
ICS HIGH PERFORMANCE VCXO. Features. Description. Block Diagram DATASHEET
DATASHEET ICS3726-02 Description The ICS3726-02 is a low cost, low-jitter, high-performance designed to replace expensive discrete s modules. The ICS3726-02 offers a wid operating frequency range and high
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
Low-Power, 1.62V to 3.63V, 1MHz To 150MHz, 1:2 Fanout Buffer IC OE CLK1. DFN-6L (2.0 x 1.3 x 0.6mm) FIN CLK1
FEATURES 2 LVCMOS Outputs Input/Output Frequency: 1MHz to 150MHz Supports LVCMOS or Sine Wave Input Clock Extremely low additive Jitter 8 ma Output Drive Strength Low Current Consumption Single 1.8V, 2.5V,
LOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
Low-Power, 1.62V to 3.63V, 1MHz to 150MHz, 1:3 Fanout Buffer IC CLK2 VDD CLK0 SOT23-6L
FEATURES 3 LVCMOS Outputs 12mA Output Drive Strength Input/Output Frequency: o Reference Clock: 1MHz to 150MHz Supports LVCMOS or Sine Wave Input Clock Very Low Jitter and Phase Noise Low Current Consumption
PL565-37/38 VCXO Family
(Preliminary) Analog Frequency Multiplier PRODUCT DESCRIPTION The Analog Frequency Multiplier (AFM) is the industry s first Balanced Oscillator utilizing analog multiplication of the fundamental frequency
Additional parameters Parameter Min Typ Max. Units Condition Weight 1 g
Typical Applications Base Stations Test + Measurement Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output range Standard frequencies 1 MHz 185 MHz 1; 25;
Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size
![Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size](/thumbs/91/106537005.jpg "Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size")
V C X O G series What is a VCXO? Logic: TTL / CMOS Wave Form: Square MERCURY Since 1973 Unlike regular clock oscillator which has fixed output frequency, the output frequency of a VCXO (also known as frequency
IPS009 series IC CMOS SPXO
IPS009 series IC Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application to the
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Reflow Process Compatible Low Phase Noise Build in PLL-Circuit
Typical Applications Base Stations Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output Frequency range Standard frequencies 10 MHz 700 MHz 10; 25; 26; 39.3216;
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]
![Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]](/thumbs/96/128719484.jpg "Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]")
PX-701 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test
IPS009 series IC CMOS SPXO
IPS009 series IC CMOS SPXO Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
ULTRA-LOW POWER OSCILLATOR 1-26MHz
ULTRA-LOW POWER OSCILLATOR 1-26MHz SERIES ULPO FEATURES + Ultra Low Power High Precision Oscillator for Low Cost + Excellent long time reliability + Ultra-small 1.5 mm x 0.8 mm package + 1 to 26 MHz with
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)
GTJF538 series (5.0x3.2x1.4 mm, 8 pads), a member of Mercury QuikXO quick-turn Voltage Controlled Crystal Oscillators 9VCXOs), features CMOS output and femtosecond (f. sec.) RMS phase jitter (163 f. sec.
RoHS EV32C3 A 3 A M
RoH Pb EV32C3 A 3 A 1-27.000M eries RoH Compliant (Pb-free) 3.3V 6 Pad 5mm x 7mm Ceramic MD LVCMO/TTL VCXO (Tri-tate Pad 5) Operating Temperature Range 0 C to +70 C Absolute Pull Range ±50ppm Minimum Nominal
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave Product Summary: SQUARE MERCURY Since 1973 TCXO VCTCXO Available Frequency Range Output Wave Form: Square Wave Package size (mm), L x W
MK2705 AUDIO CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET MK2705 Description The MK2705 provides synchronous clock generation for audio sampling clock rates derived from an MPEG stream, or can be used as a standalone clock source with a 27 MHz crystal.
LOW POWER SPREAD SPECTRUM OSCILLATOR
LOW POWER SPREAD SPECTRUM OSCILLATOR SERIES LPSSO WITH SPREAD-OFF FUNCTION 1.0 110.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Low Power Spread Spectrum Oscillator
Low-Power 2.25V to 3.63V DC to 150MHz 1:6 Fanout Buffer IC DESCRIPTION
FEATURES 1:6 LVCMOS output fanout buffer for DC to 150MHz 8mA Output Drive Strength Low power consumption for portable applications Low input-output delay Output-Output skew less than 250ps Low Additive
ICS LOW PHASE NOISE CLOCK MULTIPLIER. Features. Description. Block Diagram DATASHEET
DATASHEET ICS601-01 Description The ICS601-01 is a low-cost, low phase noise, high-performance clock synthesizer for applications which require low phase noise and low jitter. It is IDT s lowest phase
SM Features. General Description. Applications. Block Diagram
ClockWorks 10GbE (156.25MHz, 312.5MHz), Ultra-Low Jitter, LVPECL Frequency Synthesizer General Description The is a member of the ClockWorks family of devices from Micrel and provides an extremely low-noise
Analog Frequency Multiplier
Analog Frequency Multiplier DESCRIPTION Analog Frequency Multipliers TM (AFMs) are the industry s first Balanced Oscillator utilizing analog multiplication of the fundamental frequency (at double or quadruple
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as ±20 ppm Operating temperature
SG500. Low Jitter Spectrum Clock Generator for PowerPC Designs. Approved Product. FREQUENCY TABLE (MHz) PRODUCT FEATURES CONNECTION DIAGRAM
PRODUCT FEATURES Supports Power PC CPU s. Supports simultaneous PCI and Fast PCI Buses. Uses external buffer to reduce EMI and Jitter PCI synchronous clock. Fast PCI synchronous clock Separated 3.3 volt
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
VCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
DSC2011. Low-Jitter Configurable Dual CMOS Oscillator. General Description. Features. Block Diagram. Applications
General Description The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional
PT7C4511. PLL Clock Multiplier. Features. Description. Pin Configuration. Pin Description
Features Zero ppm multiplication error Input crystal frequency of 5-30 MHz Input clock frequency of - 50 MHz Output clock frequencies up to 200 MHz Peak to Peak Jitter less than 200ps over 200ns interval
CPPD C 1 L Z A5 B6 XX.XXXX / YY.YYYY CPPD
Field Programmable Crystal Oscillator Programmed in the field with the PG3200 oscillator programming itrument within seconds. Factory Programmable Standard Package Optio Itrument Part Number: CPPD C 1
[S3,S0] REF_SEL. PLL (Phase Locked Loop)
![[S3,S0] REF_SEL. PLL (Phase Locked Loop)](/thumbs/84/91188749.jpg "[S3,S0] REF_SEL. PLL (Phase Locked Loop)")
ABX02 FEATURES Selectable multipliers (x2.5, x2.75, x3, x4.25, x5, x5.5, x5.75, x6, x6.25, x0, x, x.5, x2, x2.5). Crystal input range, 3MHz to 3MHz (see Selection Table for detailed acceptable input ranges).
PT7C4502 PLL Clock Multiplier
Features Low cost frequency multiplier Zero ppm multiplication error Input crystal frequency of 5-30 MHz Input clock frequency of 4-50 MHz Output clock frequencies up to 180 MHz Period jitter 50ps (100~180MHz)
Low Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
19MHz to 250MHz Low Phase-Noise XO PAD CONFIGURATION
FEATURES < 0.6ps RMS phase jitter (12kHz to 20MHz) at 155.52MHz 30ps max peak to peak period jitter 8bit Switch Capacitor for ±50PPM crystal CLoad tuning о Load Capacitance Tuning Range: 8pF to 12pF Ultra
CARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
PI6LC48P0201A 2-Output LVPECL Networking Clock Generator
Features ÎÎTwo differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 62.5MHz, 125MHz, 156.25MHz
PI6CX201A. 25MHz Jitter Attenuator. Features
Features PLL with quartz stabilized XO Optimized for MHz input/output frequency Other frequencies available Low phase jitter less than 30fs typical Free run mode ±100ppm Single ended input and outputs
Low-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
MK1413 MPEG AUDIO CLOCK SOURCE. Features. Description. Block Diagram DATASHEET
DATASHEET MK1413 Description The MK1413 is the ideal way to generate clocks for MPEG audio devices in computers. The device uses IDT s proprietary mixture of analog and digital Phase-Locked Loop (PLL)
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
CPPC1LZ A5B6 XX.XXXX TS CPP
Field Programmable Crystal Oscillator Programmed in the field with the PG3200 oscillator programming itrument within seconds. Factory Programmable Can be programmed twice Standard Package Optio Also available
OE CLKC CLKT PL PL PL PL602-39
PL602-3x XIN VDD / * SEL0^ / VDD* SEL^ FEATURES Selectable 750kHz to 800MHz range. Low phase noise output -27dBc/Hz for 55.52MHz @ 0kHz offset -5dBc/Hz for 622.08MHz @ 0kHz offset LVCMOS (PL602-37), LVPECL
LOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 115.0 137.0 MHz FEATURES + High Frequency Programmable Low Power Oscillator for Low Cost + Excellent long time reliability + Excellent total frequency stability
AMJD-SERIES. fout = 27MHz, VDD=1.8V,
FEATURES APPLICATIONS Output selectable between 2 frequencies Compact footprint as small as 1.6x1.2mm Low power consumption 1MHz to 100MHz output frequency range Short lead time for new frequencies Wide
PI6C49X0208. High Performance 1:8 Multi-Voltage CMOS Buffer
Features 8 single-ended outputs Fanout Buffer Up to 200MHz output frequency Ultra low output additive jitter = 0.01ps (typ.) Selectable reference inputs support Xtal (10~50MHz), singleended and differential
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
DSC Q0112. General Description. Features. Applications. Block Diagram. Crystal-less Configurable Clock Generator
Crystalless Configurable Clock Generator General Description The is a four output crystalless clock generator. It utilizes Microchip's proven PureSilicon MEMS technology to provide excellent jitter and
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
SiT9003 Low Power Spread Spectrum Oscillator
Features Frequency range from 1 MHz to 110 MHz LVCMOS/LVTTL compatible output Standby current as low as 0.4 µa Fast resume time of 3 ms (Typ)
CLK1 GND. Phase Detector F VCO = F REF * (2 * M/R) VCO. P-Counter (14-bit) F OUT = F VCO / (2 * P) Programming Logic
PL611s-19 PL611s-19 FEATURES Designed for Very Low-Power applications Input Frequency, AC Coupled: o Reference Input: 1MHz to 125MHz o Accepts >0.1V input signal voltage Output Frequency up to 125MHz LVCMOS
Programmable Low-Jitter Precision CMOS Oscillator
DSC8121 General Description The DSC8101 & DSC8121 series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide
LOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 1.0 110.0 MHZ FEATURES + Low Power Programmable Oscillator for Low Cost + Excellent long time reliability + Frequency range of 1 MHz and 110 MHz accurate to
ICS722 LOW COST 27 MHZ 3.3 VOLT VCXO. Description. Features. Block Diagram DATASHEET
DATASHEET ICS722 Description The ICS722 is a low cost, low-jitter, high-performance 3.3 volt designed to replace expensive discrete s modules. The on-chip Voltage Controlled Crystal Oscillator accepts
(V DD =1.62 to 3.63V, V SS =0V, Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT x1 version (f 0 ) No load V DD =1.8V
Low phase noise Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU6222 series is a C-MOS quartz crystal oscillator IC (20MHz to 50MHz) realized very low phase noise. It is consisted of
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
FX-700 Low Jitter Frequency Translator
Product Data Sheet FX-700 Low Jitter Frequency Translator Description The FX-700 is a crystal-based frequency translator used in communications applications where low jitter is paramount. Performance advantages
LOCO PLL CLOCK MULTIPLIER. Features
DATASHEET ICS501A Description The ICS501A LOCO TM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands
Item Symbol Specifications Conditions/Remarks Supply voltage
Crystal oscillator CRYSTAL OSCILLATOR (Programmable) SPREAD SPECTRUM OUTPUT: CMOS SG - 9 series Frequency range :.67 MHz ~ 7 MHz ( ppm Step) Supply voltage :.6 V ~.6 V Function : Output enable (OE) or
19MHz to 800MHz Low Phase-Noise XO PIN CONFIGURATION
PL685-XX FEATURES < 0.5ps RMS phase jitter (12kHz to 20MHz) at 622.08MHz 30ps max peak to peak period jitter Ultra Low-Power Consumption о < 90 ma @622MHz PECL output о
EP15E7 D 2 H M TR. Pin 1 Connection Tri-State
eries Quartz Crystal Clock Oscillators XO (PXO) LVCMO (CMO) 2.5Vdc 4 Pad 2.5mm x 3.2mm Ceramic urface Mount (MD) Frequency Tolerance/tability ±50ppm Maximum over -20 C to +70 C ELECTRICAL PECIFICATION
(Prelim inary ) Analog Frequency Multiplier. Oscillator Amplifier
OSCOFF SEL GNDOSC VCON XIN VDDBUF QBAR Q GNDBUF (Prelim inary ) Analog Frequency Multiplier PRODUCT DESCRIPTION The Analog Frequency Multiplier (AFM) is the industry s first Balanced Oscillator utilizing
PI6C :4 24MHz Clock Buffer. Description. Features. Applications. Block Diagram. Pin Configuration (16-Pin TSSOP) 16-pin (173 mil) TSSOP
Features ÎÎSupport XTAL or Clock input at 24MHz ÎÎFour buffered outputs support V DDO operation ÎÎVery low phase jitter(rms) : < 1.5ps (max) ÎÎVery low additive jitter:
PI6LC48S25A Next Generation HiFlex TM Ethernet Network Clock Generator
Features ÎÎ3.3V & 2.5V supply voltage ÎÎCrystal/CMOS input: 25 MHz ÎÎDifferential input: 25MHz, 125MHz, and 156.25 MHz ÎÎOutput frequencies: 312.5, 156.25, 125, 100, 50, 25MHz ÎÎ4 Output banks with selectable
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
ICS NETWORKING AND PCI CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET Description The is a low cost frequency generator designed to support networking and PCI applications. Using analog/digital Phase Locked-Loop (PLL) techniques, the device uses a standard fundamental
PI6C B. 3.3V Low Jitter 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer. Description. Features. Block Diagram. Pin Diagram
Features Maximum output frequency: 500MHz 4 pair of differential LPECL outputs Selectable and crystal inputs accepts LCMOS, LTTL input level Ultra low additive phase jitter: < 0.05 ps (typ) (differential
ICS511 LOCO PLL CLOCK MULTIPLIER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS511 Description The ICS511 LOCO TM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands
APPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT
Description Q-Tech s 5x7mm LVDS and LVPECL hybrid oscillators consist of an IC operating at various supply voltages of 2.5V and 3.3Vdc and a miniature strip quartz crystal. The series is offered in various
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
Programmable Low-Jitter Precision HCSL Oscillator
Programmable LowJitter Precision HCSL Oscillator General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter
PI6LC48P Output LVPECL Networking Clock Generator
Features ÎÎFour differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz
ICS NETWORKING CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET Description The generates four high-quality, high-frequency clock outputs. It is designed to replace multiple crystals and crystal oscillators in networking applications. Using ICS patented Phase-Locked
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
LOW PHASE NOISE CLOCK MULTIPLIER. Features
DATASHEET Description The is a low-cost, low phase noise, high performance clock synthesizer for applications which require low phase noise and low jitter. It is IDT s lowest phase noise multiplier. Using