Item Symbol Specifications Conditions/Remarks Supply voltage
|
|
- Melvin Marsh
- 6 years ago
- Views:
Transcription
1 Crystal oscillator CRYSTAL OSCILLATOR (Programmable) SPREAD SPECTRUM OUTPUT: CMOS SG - 9 series Frequency range :.67 MHz ~ 7 MHz ( ppm Step) Supply voltage :.6 V ~.6 V Function : Output enable (OE) or Standby (ST ) Down or Center spread modulation Configurable spreading modulation profile (Hershey-kiss, Sine-wave, Triangle), modulation frequency, 6 spread percentage Package :. x.,. x.,. x., 7. x. (mm) PLL technology to enable short lead time Available field oscillator programmer SG-Writer II Product Number (please contact us) SG-9CA: XGxxxx SG-9CB: XGxxxx SG-9CE: XGxxxx SG-9CG: XG9xxxx CG CE CB CA Specifications (characteristics) Item Symbol Specifications Conditions/Remarks Supply voltage VCC.8 V Typ.. V Typ.. V Typ..6 V ~.98 V.98 V ~. V. V ~.8 V.7 V ~.6 V - Output frequency range fo.67 MHz ~ 7 MHz Storage temperature T_stg - ºC ~ + ºC Storage as single product. Operating temperature T_use - ºC ~ +8 ºC - ºC ~ + ºC Frequency tolerance * f_tol ± -6 Average frequency of s gate time. Current consumption ICC. ma Max.. ma Max..6 ma Max..7 ma Max. T_use = + ºC.9 ma Typ.. ma Typ.. ma Typ. T_use = + ºC No load, fo = MHz.7 ma Max. 6. ma Max. 6.9 ma Max. 8. ma Max. T_use = + ºC.9 ma Typ..9 ma Typ. 7. ma Typ. T_use = + ºC No load, fo = 7 MHz Output disable current I_dis. ma Max.. ma Max.. ma Max..7 ma Max. OE = GND, fo = 7 MHz Standby current I_std.9 μa Max.. μa Max.. μa Max.. μa Max. T_use = + ºC. μa Typ.. μa Typ.. μa Typ.. μa Typ. T_use = + ºC ST = GND Symmetry SYM % ~ % % VCC Level IOH/IOL Conditions [ma] Rise/Fall time Vcc *A *B *C *D Output voltage (DC characteristics) VOH VOL 9 % VCC Min. % VCC Max. Output load condition L_CMOS pf Max. - Input voltage VIH VIL 7 % VCC Min. % VCC Max. Default (fo > MHz), IOH Fast IOL.... Default (fo MHz) IOH IOL.... Slow IOH IOL.... *A:.6 V ~.98 V, *B:.98 V ~. V, *C:. V ~.8 V, *D:.7 V ~.6 V OE or ST. ns Max. fo > MHz Default Rise and Fall 6. ns Max. fo MHz % - 8 % VCC, tr/tf time Fast. ns Max. fo =.67 MHz ~ 7 MHz L_CMOS = pf Slow. ns Max. fo =.67 MHz ~ MHz Measured from the time OE or ST pin crosses % Disable Time t_stp μs Max. Enable Time t_sta μs Max. Measured from the time OE pin crosses 7 % VCC Resume Time t_res ms Max. Measured from the time ST pin crosses 7 % VCC Start-up time t_str ms Max. Measured from the time VCC reaches its rated minimum value,.6 V * Frequency tolerance includes initial frequency tolerance, temperature variation, supply voltage variation, reflow drift, load drift and aging (+ ºC, year). Spread spectrum configuration C: Center spread Code 7 modulation Spread percentage. %. %.7 %. %. %. % D: Down spread Code modulation Spread percentage -. % -. % -. % -. % -. % -. % Modulation frequency:. khz (default), 6. khz, 8. khz,.7 khz Modulation profile: Hershey-kiss (default), Sine-wave, Triangle Product Name SG-9CG 7.MHz C P H A A A Model, Package type, Frequency, Spread type, Spread percentage code, 6Function, 7Operating temperature, 8Modulation frequency, 9Modulation profile, Rise/Fall time VCC Package Type Spread type 7Operating temperature 9Modulation profile CA: 7. mm x. mm C: Center spread G: - C ~ +8 C A: Hershey-kiss (default) CB:. mm x. mm D: Down spread H: - C ~ + C B: Sine-wave CE:. mm x. mm C: Triangle CG:. mm x. mm 6Function 8Modulation frequency P: Output enable A:. khz (default) Rise/Fall time S: Standby B:.7 khz A: Default C: 8. khz B: Fast D: 6. khz C: Slow
2 Crystal oscillator Pin description Pin Name I/O type Function OE Input Output enable High: Specified frequency output from OUT pin Low: Out pin is low (weak pull down), only output driver is disabled. High: Specified frequency output from OUT pin ST Input Standby Low: Out pin is low (weak pull down), Device goes to standby mode. Supply current reduces to the least as I_std. GND Power Ground OUT Output Clock output V CC Power Power supply External dimensions (Unit: mm) Footprint (Recommended) (Unit: mm) SG-9CG SG-9CG SG-9CE SG-9CE SG-9CB SG-9CB SG-9CA SG-9CA In order to achieve optimum jitter performance, the. μf capacitor between VCC and GND should be placed. It is also recommended that the capacitors are placed on the device side of the PCB, as close to the device as possible and connected together with short wiring pattern.
3 Cycle to Cycle Jitter Peak - Peak (ps) Cycle to Cycle Jitter Peak - Peak (ps) Cycle to Cycle Jitter Peak - Peak (ps) I_dis (ma) Icc (ma) Icc (ma) Crystal oscillator Specification Graph(Typical supplemental specification. Unless otherwise specified T_use =, L_CMOS = pf) Current Consumption 8 L_CMOS = No load L_CMOS = pf 7 6 Vcc =. V Vcc =. V Vcc =.8 V 8 6 Vcc =. V Vcc =. V Vcc =.8 V Output disable current Standby current.... Vcc =. V Vcc =. V Vcc =.8 V Spead percentage : ±. %, Modulation frequency :. khz, Modulation profile : Hershey-kiss Specification Graph(Typical supplemental specification. Unless otherwise specified T_use =, L_CMOS = pf) Cycle-to-Cycle Jitter Peak-Peak 8 6 Vcc =.8 V Rise/Fall time = Default Rise/Fall time = Fast Rise/Fall time = Slow 8 6 Vcc =. V Rise/Fall time = Default Rise/Fall time = Fast Rise/Fall time = Slow 8 6 Vcc =. V Rise/Fall time = Default Rise/Fall time = Fast Rise/Fall time = Slow Spead percentage : ±. %, Modulation frequency :. khz, Modulation profile : Hershey-kiss
4 Attenuation (dbc) Attenuation (dbc) Attenuation (dbc) Attenuation (dbc) Power (dbm) Power (dbm) Crystal oscillator Spread Spectrum Specification Graph Spread Spectrum Profile fo : 7 MHz / Spread spectrum : ±. % / Modulation frequency :. khz Hershey-kiss Sine-wave Triangle Harmonics Specification Graph (Typical supplemental specification. Unless otherwise specified T_use =, L_CMOS = pf, Vcc =. V) Harmonics spectrum ( fo = MHz ) No spread spectrum Center spread ±. %, Hershey-kiss,. khz frequency (MHz) frequency (MHz) Modulation profile Modulation frequency - - fo = MHz Hershey-kiss fo = MHz Sine-wave fo = MHz Triangle - - fo = MHz. khz fo = MHz 6. khz Spread percentage Output frequency - - fo = MHz ±. % fo = MHz ±. % fo = MHz ±. % - - fo = 7 MHz fo = MHz fo = MHz Tr/Tf = fast Hermonics order attenuation is normalizing to no-spread spectrum mode.
5 Attenuation (dbc) Attenuation (dbc) Attenuation (dbc) Rise Time(ns) Fall Time(ns) Rise Time(ns) Fall Time(ns) Crystal oscillator Specification Graph(Typical supplemental specification. Unless otherwise specified T_use =, L_CMOS = pf) Rise/Fall Time (fo = MHz)..... Rise time L_CMOS = pf Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast..... Vcc (V)..... Fall time L_CMOS = pf Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast..... Vcc (V)..... Rise time L_CMOS = pf Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast..... Vcc (V) Harmonics comparison Center spread ±. %, Hershey-kiss,. khz Rise/Fall time = Fast fo = MHz Vcc =. V fo = MHz Vcc =. V fo = MHz Vcc =.8 V Fall time L_CMOS = pf Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast..... Vcc (V) Rise/Fall time = Slow fo = MHz Vcc =. V fo = MHz Vcc =. V fo = MHz Vcc =.8 V comparation of Rise/Fall time Vcc =. V fo = MHz, Rise/Fall time=fast fo = MHz Rise/Fall time=default fo = MHz, Rise/Fall time=slow Normalize to Vcc =.V. Normalize to Vcc =.V. Normalize to Rise/Fall time = Fast. frequency slow default fast.67 M M See Slow See Default See Fast M M - See Default See Fast M 7 M - See Fast See Fast
6 Crystal oscillator Simulation Model IBIS Model is available upon request. Please contact us. Information Required: Oscillator operating condition (i.e. Power Supply, Rise/Fall Time, Temperature) ESD Rating Test items Human Body Model (HBM) Machine Model (MM) Charged Device Model (CDM) Breakdown voltage V V 7V Device Material & Environmental Information Model Package Dimensions # of Pins Reference Weight (Typ.) Terminal Material Terminal Plating Complies With EU RoHS SMD products Reflow profile(example) The availability of the heat resistance for reflow conditions of JEDEC-STD-D. is judged individually. Please inquire. Pb Free MSL Rating Peak Temp. (Max) SG-9CG.x.x.7mm mg W Au Yes Yes 6 C SG-9CE.x.x.mm mg W Au Yes Yes 6 C SG-9CB.x.x.mm mg W Au Yes Yes 6 C SG-9CA 7.x.x.mm mg W Au Yes Yes 6 C Temperature [ C ] TP ; +6 C OVER + C TL ; +7 C Ts max ; + C Ramp-up rate + C/s Max. tl 6 s to s tp ; at least s Ramp-down rate -6 C/s Max. Ts min ; + C ts 6 s to s Time + C to Peak Time [ s ] Pb free. Complies with EU RoHS directive. About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.)
7 Crystal oscillator Device Marking Model Factory Programmed Part Marking Field Programmable Part Marking (Blank Samples) SG-9CG SG-9CE SG-9CB SG-9CA Standard Packing Specification SMD products are packed in the shipping carton as below table in accordance with taping standards EIA-8 and IEC-686 Marking Marking Standard Packing Quantity & Dimension(Unit mm) Model Reel Dimension Career Tape Dimension Direction of Quantity Feed (L= Left (pcs/reel) a b W A B C D Direction) SG-9CG Φ8 Φ L SG-9CE Φ8 Φ L SG-9CB Φ8 Φ L SG-9CA Φ Φ L
8 PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Seiko Epson, all environmental initiatives operate under the Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO certification. ISO is an international standard for environmental management that was established by the International Standards Organization in 996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Seiko Epson made early efforts towards obtaining ISO9 series certification and has acquired ISO9 for all business establishments in Japan and abroad. We have also acquired ISO/TS 699 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS699 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9. Explanation of the mark that are using it for the catalog Pb free. Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc. Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ). Notice This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. The information about applied data, circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of customer damage or infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Seiko Epson Corporation
CRYSTAL OSCILLATOR (Programmable) SPREAD SPECTRUM OUTPUT: CMOS SG series
CRYSTAL OSCILLATOR (Programmable) SPREAD SPECTRUM OUTPUT: CMOS SG - 9 series Frequency range :.67 MHz ~ 7 MHz ( ppm Step) Supply voltage :.6 V ~.6 V Function : Output enable (OE) or Standby (ST ) Down
More informationCE, CA % to 60 % CMOS load:50 % VCC level, Max. load condition
Crystal oscillator CRYSTAL OSCILLATOR PROGRAMMABLE OUTPUT : CMOS SG - 82 series Frequency range : 1 MHz to 125 MHz Supply voltage : 3. V / 3.3 V / 5. V Function : Output enable(oe) or Standby( ST ) Short
More informationLOW POWER SPREAD SPECTRUM OSCILLATOR
LOW POWER SPREAD SPECTRUM OSCILLATOR SERIES LPSSO WITH SPREAD-OFF FUNCTION 1.0 110.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Low Power Spread Spectrum Oscillator
More informationHigh stability temperature compensated crystal oscillator
High stability temperature compensated crystal oscillator Product name : TG3225CEN / TG2520CEN Features High stability Frequency range : 12 MHz to 52 MHz Output : CMOS Supply voltage : 2.375 to 3.63 V
More informationSiT9003 Low Power Spread Spectrum Oscillator
Features Frequency range from 1 MHz to 110 MHz LVCMOS/LVTTL compatible output Standby current as low as 0.4 µa Fast resume time of 3 ms (Typ)
More informationUltra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Ultra-miniature size: Supply oltage: 1.2 to 3.63 (-10 ~ +70); 1.5 to 3.63 (-40 ~ +85) Ultra-Low Current Consumption: 1.4µA max.
More informationULTRA-LOW POWER OSCILLATOR 1-26MHz
ULTRA-LOW POWER OSCILLATOR 1-26MHz SERIES ULPO FEATURES + Ultra Low Power High Precision Oscillator for Low Cost + Excellent long time reliability + Ultra-small 1.5 mm x 0.8 mm package + 1 to 26 MHz with
More informationLOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
More informationLOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 115.0 137.0 MHz FEATURES + High Frequency Programmable Low Power Oscillator for Low Cost + Excellent long time reliability + Excellent total frequency stability
More informationUltra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
More informationLOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 1.0 110.0 MHZ FEATURES + Low Power Programmable Oscillator for Low Cost + Excellent long time reliability + Frequency range of 1 MHz and 110 MHz accurate to
More informationUltra high stability temperature compensated crystal oscillator
Ultra high stability temperature compensated crystal oscillator Product name : TG5032CAN / TG5032SAN Features Ultra high stability Low phase noise Frequency range : 10 MHz to 50 MHz Output : CMOS, Clipped
More informationUltra-miniature, Low Power, kHz MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 ESD Sensitive FEATURES: Smallest 32.768kHz TCXO in the market: 1.54 x 0.84 x 0.6mm Supply oltage: 1.5 to 3.63 Ultra-Low Current Consumption: 1.52µA max.(core current,
More informationDSC V Low-Power CMOS Oscillator
DSC.V LowPower CMOS Oscillator General Description The DSC is a.v fixed frequency MEMS based PureSilicon Oscillator. It can be factory programmed to any frequency from to 5MHz. The DSC incorporates an
More informationParameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
More informationUltra high stability temperature compensated crystal oscillator Product name : TG5032CCN / TG5032SCN
Ultra high stability temperature compensated crystal oscillator Product name : TG5032CCN / TG5032SCN Features Ultra high stability Low phase noise Frequency range : 10 MHz to 50 MHz Output : CMOS, Clipped
More informationParameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
More informationCARDINAL COMPONENTS. Operating Conditions: Description Min Max Unit
Standard Package Options Series CPP Part Numbering Example: CPP C 1 L Z - A5 B6 - XXXXXX TS CPP C 1 L Z A5 SERIES CPP OUTPUT C = CMOS T = TTL Specifications: PACKAGE STYLE 1 = Full Size 4 = Half Size 5
More informationSolder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model
Description Q-Tech s 5x7mm LVCMOS Voltage Controlled Crystal Oscillators consist of an IC operating at a supply voltage 3.3Vdc and a miniature strip quartz crystal that operates at the fundamental frequency.
More informationSiT2002B High Frequency, Single Chip, One-output Clock Generator
Features Any frequency between 115 MHz to 137 MHz accurate to 6 decimal places of accuracy Operating temperature from -40 C to 85 C. Refer to SiT2019 for -40 C to 125 C and SiT2021 for -55 C to 125 C options
More informationDSC2011. Low-Jitter Configurable Dual CMOS Oscillator. General Description. Features. Block Diagram. Applications
General Description The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional
More informationDISCONTINUED PH5502B2NA1-E4. Preliminary. Data Sheet. Ambient Illuminance Sensor DESCRIPTION FEATURES APPLICATIONS. R08DS0038EJ0100 Rev.1.
PH5502B2NA-E4 Ambient Illuminance Sensor DESCRIPTION Preliminary Data Sheet The PH5502B2NA-E4 is an ambient illuminance sensor with a photo diode and current amplifier. This product has spectral characteristics
More informationMEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
More informationSolder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT
Description Q-Tech s 5x7mm LVDS and LVPECL hybrid oscillators consist of an IC operating at various supply voltages of 2.5V and 3.3Vdc and a miniature strip quartz crystal. The series is offered in various
More informationBenefits. Applications. Pinout. Pin1. SiTime Corporation 990 Almanor Avenue, Suite 200 Sunnyvale, CA (408)
1 to 125 MHz Programmable Oscillator Features ±60 ps Peak-Peak Period Jitter Wide frequency range 1 MHz to 125 MHz Low frequency tolerance ±50 ppm or ±100 ppm Operating voltage 1.8V or 2.5 or 3.3 V 2.25V
More informationDIFFERATIAL LOW POWER SPREAD SPECTRUM
DIFFERATIAL LOW POWER SPREAD SPECTRUM OSCILLATOR 1.0 220.0 MHz SERIES FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Differential Low Power Spread Spectrum Oscillator for
More informationDSC1033. General Description
DSC1.V LowPower CMOS Oscillator General Description The DSC1 is a.v fixed frequency MEMS based PureSilicon Oscillator. It can be factory programmed to any frequency from 1 to 15MHz. The DSC1 incorporates
More informationPreliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
More informationParameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as ±20 ppm Operating temperature
More informationSAW-Based Differential Multi Output (LVDS) : MG7050VAN
SAW-Based Differential Multi Output (LDS) : MG7050AN Features Ultra Low jitter : 0.3 ps Max. 2 or 4 outputs and it is able to reduce fan-out buffers Frequency range : 100 MHz to 700 MHz Supply voltage
More informationSG-8002DB / DC series
rystal oscillator PROGRAALE HIGH-FREQUENY RYAL OILLATOR SG-82D / D series Product number (please refer to page 2) Q 3 2 3 D x x x x x x Q 3 2 4 D x x x x x x Wide frequency output by PLL technology. Quick
More informationCMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
More informationINFORMATION. DATE : 12th. Sep SEIKO EPSON CORPORATION Nakaminowa, Minowa-machi, Kamiina-gun, Nagano-ken Japan. OUT rev.
INFORMATION Model : VG-4513CA DATE : 12th. Sep. 2013 SEIKO EPSON CORPORATION 8548 Nakaminowa, Minowa-machi, Kamiina-gun, Nagano-ken 399-4696 Japan OUT-13-0473 rev.2 INTRODUCTION 1. The contents is subject
More informationLogic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
More informationSMD SPXO 5.0x3.2mm VDC MHz
SMD SPXO 5.0x3.2mm 1.8-5.0 VDC MHz SERIES SXO FEATURES + High reliability for low cost + Low-priced SMD-clock-oscillator + Frequency stability from ±20 to ±100 ppm available + Supply voltage of 1.8, 2.5,
More informationDSC x 1.2 mm Low-Power Ultra-Miniature Oscillator. General Description. Features
1.6 x 1.2 mm General Description The is an ultraminiature, lowprofile complete timing solution in a 1.6 x 1.2 mm footprint. The device is available in frequencies from 1 to 150 MHz with frequency stability
More informationVV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
More informationDSC1001. Low-Power Precision CMOS Oscillator. General Description. Features. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
More informationJ-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
More informationCARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
More informationVS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
More informationXCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
More informationQTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
More informationHIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
More informationVX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
More informationULTRA-LOW POWER HIGH PRECISION OSCILLATOR
ULTRA-LOW POWER HIGH PRECISION OSCILLATOR SERIES ULPPO 32.768 khz FEATURES + Ultra Low Power High Precision Oscillator for Low Cost + Excellent long time reliability outperforms quartz-based XO + 32.768
More informationDSC Q0112. General Description. Features. Applications. Block Diagram. Crystal-less Configurable Clock Generator
Crystalless Configurable Clock Generator General Description The is a four output crystalless clock generator. It utilizes Microchip's proven PureSilicon MEMS technology to provide excellent jitter and
More informationMEMS Ultra-Low Power Oscillator, khz Quartz XTAL Replacement
33Features: MEMS Technology Small SMD package: 2.0 x 1.2 mm (2012) Fixed 32.768 khz output frequency NanoDrve TM programmable output swing for lowest power Pb-free, RoHS and REACH compliant Typical Applications:
More informationHT-MM900A Military Temperature Oscillator
HT-MM900A Military Temperature Oscillator Features Performance Specifica ons Applications Frequency Range 1 MHz and 137 MHz accurate to 6 decimal places Military Applica ons Low power consump on of 4.5
More informationVX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
More informationULTRA-LOW POWER OSCILLATOR
ULTRA-LOW POWER OSCILLATOR SERIES ULPO-RB2 FEATURES + Ultra-Low Power Oscillator for Low Cost + Excellent long time reliability + Pin-compatible to 2012 XTAL SMD packaging + ±20 ppm frequency tolerance
More informationVS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
More informationVVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
More informationInfrared Receiver Module IRM-H5XXM3/TR2 Series
Series Block Diagram Pin Configuration 1. OUT 2. Vcc 3. GND 1 2 3 Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier frequencies
More informationQ-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature strip quartz crystal built in a low profile hermetically ceramic package
More informationQTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
More informationOther Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
More informationELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
More informationEMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R
The most efficient way to reduce EMI (Electromagnetic Interference) is to reduce it from its principle source the clock oscillator. Mercury 3HM572, an integrated clock module composed of a spread spectrum
More informationLow-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
More informationICS CLOCK SYNTHESIZER FOR PORTABLE SYSTEMS. Description. Features. Block Diagram PRELIMINARY DATASHEET
PRELIMINARY DATASHEET ICS1493-17 Description The ICS1493-17 is a low-power, low-jitter clock synthesizer designed to replace multiple crystals and oscillators in portable audio/video systems. The device
More informationDescription. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
More information10 pf ~ 32 pf or Series Resonance. ±3 ppm per year max. -55 /+125 C OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
SMD QUARTZ CRYSTAL SERIES SMD0507 (2 pad housing 7.0x5.0mm) Please do not use this housing for new design. Please use SMD0507/4 housing FEATURES + Large frequency spectrum available + Do not use for new
More informationQ-TECH CORPORATION. Description. Features. Applications
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature round or strip quartz crystal built in a low profile hermetically ceramic
More informationVX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationLow Power Multiclock Generator with VCXO AK8130AH
Low Power Multiclock Generator with VCXO Features 27MHz Crystal Input Four Frequency-Selectable Clock Outputs One 27MHz-Reference Output Selectable Clock out Frequencies: - 54.000,74.1758, 74.250MHz -
More informationXC2163 Series GENERAL DESCRIPTION APPLICATIONS FEATURES PIN ASSIGNMENT PIN CONFIGURATION /INH, Q0 PIN FUNCTION
ETR1403_001a ICs for use with 3rd Overtone Crystal Oscillators GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
More informationSynchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
More informationQTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications
Description The QTCH series are miniature surface-mount (SMD) crystal oscillators supporting.768khz* fundamental mode operating in a wide supply voltage range from.5vdc to.vdc, very low power consumption
More informationSiT to 725 MHz Ultra-low Jitter Differential Oscillator
SiT9367 220 to 725 MHz Ultra-low Jitter Differential Oscillator Features Any frequency between 220.000001 MHz and 725 MHz, accurate to 6 decimal places. For HCSL output signaling, maximum frequency is
More informationICS HIGH PERFORMANCE VCXO. Features. Description. Block Diagram DATASHEET
DATASHEET ICS3726-02 Description The ICS3726-02 is a low cost, low-jitter, high-performance designed to replace expensive discrete s modules. The ICS3726-02 offers a wid operating frequency range and high
More informationSKYA21001: 20 MHz to 3.0 GHz SPDT Switch
DATA SHEET SKYA21001: 20 MHz to 3.0 GHz SPDT Switch Automotive Applications Infotainment Automated toll systems Garage door opener 802.11 b/g/n WLAN, Bluetooth systems Wireless control systems Outdoor
More informationPECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator
PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES:
More informationDSC2042. Low-Jitter Configurable HCSL-LVPECL Oscillator. General Description. Features. Block Diagram. Applications
LowJitter Configurable HCSLLVPECL Oscillator General Description The DSC2042 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and
More informationICS NETWORKING AND PCI CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET Description The is a low cost frequency generator designed to support networking and PCI applications. Using analog/digital Phase Locked-Loop (PLL) techniques, the device uses a standard fundamental
More informationLow Power MEMS Jitter Attenuator
Moisture Sensitivity Level: MSL= FEATURES: Low power and miniature package programmable jitter attenuator Input/output frequency up to 200MHz I/O pins can be configured as output enable (OE), frequency
More informationICS722 LOW COST 27 MHZ 3.3 VOLT VCXO. Description. Features. Block Diagram DATASHEET
DATASHEET ICS722 Description The ICS722 is a low cost, low-jitter, high-performance 3.3 volt designed to replace expensive discrete s modules. The on-chip Voltage Controlled Crystal Oscillator accepts
More informationMHz MEMS TCXO and VCTCXO
Preliminary Features Any frequency between 80.000001 and 220 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based (VC)TCXO Frequency stability as low as ±5 ppm. Contact
More information20MHz to 134MHz Spread-Spectrum Clock Modulator for LCD Panels DS1181L
Rev 1; /0 0MHz to 13MHz Spread-Spectrum General Description The is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-based, digital electronic equipment. Using an integrated
More informationProgrammable Low-Jitter Precision LVDS Oscillator
General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages
More informationMK SPREAD SPECTRUM MULTIPLIER CLOCK. Description. Features. Block Diagram DATASHEET
DATASHEET MK1714-01 Description The MK1714-01 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread spectrum designed to generate high frequency clocks
More informationRakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
More informationQT93W and QT93P SERIES HIGH-RELIABILITY LVPECL OR LVDS MINIATURE CLOCK OSCILLATORS 2.5 to 3.3Vdc - 40MHz to 250MHz Description
-TECH T9W and T9P SERIES Description -Tech s surface-mount T9 series oscillators consist of a 2.5Vdc and.vdc differential PECL or LVDS output oscillator IC and a round AT high-precision quartz crystal
More informationMK SPREAD SPECTRUM MULTIPLIER CLOCK. Description. Features. Block Diagram DATASHEET
DATASHEET MK1714-02 Description The MK1714-02 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread designed to generate high frequency clocks with low
More informationSAW components. SAW RF Uplink 2in1 input diplex filter Base stations LTE band 5 and 13. RF360 Europe GmbH A Qualcomm TDK Joint Venture
A Qualcomm TDK Joint Venture Base stations LTE band 5 and 13 Series/type: Ordering code: B39841U510 Date: January 19, 2018 Version: 2.1 RF360 products mentioned within this document are offered by RF360
More informationLogic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
More informationVT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
More informationLow-Jitter Precision LVPECL Oscillator
DSC0 General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
More informationELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Any Frequency between Frequency range, accurate to 6 decimal places
Page 1 of 5 Ultra low phase jitter: 0.5ps ( 12kHz to 20MHz ) LCMOS/ LTTL compatible output SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION ALUE UNIT Min. Typ. Max. Frequency
More informationTRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
More informationAMJD-SERIES. fout = 27MHz, VDD=1.8V,
FEATURES APPLICATIONS Output selectable between 2 frequencies Compact footprint as small as 1.6x1.2mm Low power consumption 1MHz to 100MHz output frequency range Short lead time for new frequencies Wide
More informationPCI-EXPRESS CLOCK SOURCE. Features
DATASHEET ICS557-01 Description The ICS557-01 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 100 MHz in a small 8-pin SOIC package.
More informationSKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKYA2112: 2 MHz to 6. GHz GaAs SPDT Switch Automotive Applications Infotainment Automated toll systems Garage door opener 82.11 b/g/n WLAN, Bluetooth systems Wireless control systems Outdoor
More informationProgrammable Low-Jitter Precision HCSL Oscillator
Programmable LowJitter Precision HCSL Oscillator General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter
More informationSTCL1100 STCL1120 STCL1160
High frequency silicon oscillator family Features Fixed frequency 10/12/16 MHz ±1.5% frequency accuracy over all conditions 5 V ±10% operation Low operating current, ultra low standby current Push-pull,
More informationAutomotive Temperature Range Spread-Spectrum EconOscillator
General Description The MAX31091 is a low-cost clock generator that is factory trimmed to output frequencies from 200kHz to 66.6MHz with a nominal accuracy of ±0.25%. The device can also produce a center-spread-spectrum
More informationDSC2022. Low-Jitter Configurable Dual LVPECL Oscillator. Features. General Description. Block Diagram. Applications
General Description The DSC2022 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device
More informationSiT1602. Standard Frequency, Low Power Oscillator. Preliminary. Electrical Characteristics
SiT1602 Preliminary Standard Frequency, Low Power Oscillator Features 50 standard frequencies between 3.75 MHz and 77.76 MHz 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency
More informationPERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series
ASDMP Series FEATURES: Ultra Miniature Pure SiliconTM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication Exceptional Stability Over Temp. at
More information