Smooth machine start-up thanks to wirelessly integrated remote I/O systems

Size: px

Start display at page:

Download "Smooth machine start-up thanks to wirelessly integrated remote I/O systems"

Sheila Chase
5 years ago
Views:

Smooth machine start-up thanks to wirelessly integrated remote I/O systems Your I/O technology can be smoothly integrated in your usual engineering system with modules which adapt to your individual

1 Smooth machine start-up thanks to wirelessly integrated remote I/O systems Your I/O technology can be smoothly integrated in your usual engineering system with modules which adapt to your individual circumstances and are quick to get up and running. Whether you opt for the IP 67 version directly on the panel or in the cabinet in an IP 0 housing, I/O systems from Weidmüller enable wireless integration in existing programming environments. Intelligent functions mean you are ready instantly. With your practical equipment, our remote I/O systems optimise your machines and processes. Let s connect IP 0. u-remote. IP 67 B. SI aktiv.

2 u-remote. IP 0 Weidmüller u-remote our innovative remote I/O concept with IP 0 which focuses purely on user benets tailored planning, faster installation, safer start-up, minimised downtimes. For considerably improved performance and greater productivity.

3 IP 0 IP 0 u-remote. Introduction.6 IP 0 Field bus coupler.8 Digital input modules.6 Digital output modules.6 Digital counter modules.6 Pulse width modulation modules.0 nalogue input modules. Temperature modules.5 nalogue output modules.56 Power-feed modules.60 Modules for functional safety.6 ccessories.68 System overview.7

purely on user benets tailored planning, faster installation, safer start-up, minimised

Reduce the size of your cabinets with u-remote, thanks to the narrow design and the

Our u-remote technology also offers tool-free assembly, while the modular design and

Status LEDs on the channel and each u-remote module enable reliable diagnosis and rapid

This and many other amazing ideas boost the availability of your machines and systems.

Our u-remote can do it all - ore Performance. Simplied.

4 u-remote. IP 0 Weidmüller u-remote the innovative remote I/O concept with IP 0 which focuses purely on user benets tailored planning, faster installation, safer start-up, minimised downtimes. For considerably improved performance and greater productivity. Reduce the size of your cabinets with u-remote, thanks to the narrow design and the need for fewer power-feed modules. Our u-remote technology also offers tool-free assembly, while the modular design and integrated web server speed up installation, both in the cabinet and machine. Status LEDs on the channel and each u-remote module enable reliable diagnosis and rapid service. This and many other amazing ideas boost the availability of your machines and systems. nd ensure smooth processes too. From planning to operation. Our u-remote can do it all - ore Performance. Simplied. Speed things up with modularity The modular structure of u-remote ensures rapid start-up and simple service. The compact design enables intuitive handling which reduces wiring mistakes and therefore lessens the start-up times for machines and systems. u-remote speeds up the replacement of electronics without the need to alter wiring during maintenance work, so improving system availability.

Improve system availability The system simply runs on and on.

communication, or the supply of voltage to your remote I/O system.

Local and remote testing By starting up one section at a time, u-remote simplies

It allows you to run diagnoses remotely using any standard browser and without

You can also simulate inputs and force outputs, locally and with ease.

With the narrow design (module width of.

single power supply is enough Keep your remote I/O station as small as possible and

u-remote has a supply path, which allows 6I/O modules to be operated with ust one

5 Improve system availability The system simply runs on and on. The permanent base allows electronics to be replaced without interrupting communication, or the supply of voltage to your remote I/O system. reliable solution for minimising machine downtime. Local and remote testing By starting up one section at a time, u-remote simplies remote testing and its integrated web server capability speeds up maintenance work. It allows you to run diagnoses remotely using any standard browser and without having to install any software. You can also simulate inputs and force outputs, locally and with ease. IP 0 Plan for a smaller set-up ow you can congure your cabinets one size smaller. With the narrow design (module width of.5 mm), not only does u-remote save space, it also delivers highest channel density and extremely exible design options. For innovative and cost-saving solutions in small spaces. single power supply is enough Keep your remote I/O station as small as possible and simplify your planning. u-remote has a supply path, which allows 6I/O modules to be operated with ust one power supply on the coupler. Intelligently separated u-remote separates the supply for inputs and outputs using two 0 current paths which are able to withstand high loads. High productivity translates into fewer power-feed modules and therefore more space and less planning. nd your system can be quickly maintained while retaining full diagnostic capability, as inputs and outputs can be switched off independently of one another.

The technician can see and rectify errors without delay.

Extremely fast with huge power reserves The u-remote has outstanding electronic performance, with the

6 IP 0 u-remote. One glance and you can see everything going on Clear assignment of status and diagnosis has never been this simple. With one LED on the channel and status displays on each module, you can easily see all you need on u-remote. The technician can see and rectify errors without delay. Indispensable benets for a safe start-up and rapid system maintenance. Extremely fast with huge power reserves The u-remote has outstanding electronic performance, with the high-speed system bus achieving up to 56 DI/DOs in 0 s. u-remote offers an extremely fast response time and precise mapping of processes in the system, with up to 0 I/O channels per station, as well as huge power reserves for future use. Keeping it simple The u-remote modules can be released without any tools and their sequence can be changed. For faster machine maintenance and simple system modication.

One row with no mistakes The clearly structured single-row connection strip assists with assignment to

When working to tight deadlines, this prevents wiring mistakes and problems during service work.

The conductor with wire end ferrule is simply inserted in the clamping unit until the stop is reached ob

methods, and without security losses on safety.

7 One row with no mistakes The clearly structured single-row connection strip assists with assignment to the circuit diagrams. When working to tight deadlines, this prevents wiring mistakes and problems during service work. Direct insertion direct savings u-remote is equipped with PUSH IN direct connection technology. The conductor with wire end ferrule is simply inserted in the clamping unit until the stop is reached ob done! This technology delivers time savings of up to 50percent, compared to conventional wire-connection methods, and without security losses on safety. IP 0 Simply plug and go The plug-in connection level allows sensors and actuators to be connected with pre-assembled cables. This means improved time benets, better handling, and minimises the number of mistakes in system wiring. Focus on reliability u-remote remains stable in the event of uctuating temperatures. It is designed for use in temperatures of between 0C and 60C without restrictions on function, which is not only great for safety, but the system's life expectancy too.

8 u-remote. IP 0 Let s connect.

9 IP 0 u-remote from Weidmüller is the reliable interface between eld bus and eld level in automation. The modular system is based on various components a eld bus coupler, up to 6 I/O modules, optional power-feed modules and a wealth of accessories, such as markers and terminating elements. IP 0 The eld bus coupler is the central link between the various eld bus standards and the u-remote system bus. t the same time, up to 6 I/O modules are supplied via its integrated power contacts. The well-engineered technology of the connection system enables x 0 to be supplied for the input and output modules and the system voltage to be fully supplied through the eld bus coupler. Every eld bus coupler provides direct access to the u-remote system via a web server without additional software having to be installed. This means that the system can be parameterised and its conguration checked. Inputs and outputs can also be checked or inuenced. The connection may take the form of an Ethernet-based eld bus or micro USB. The u-remote eld bus couplers are integrated in the standard simple manner. The corresponding development environments of the control systems and the device description les available online, e.g. SD, ESD or L, can be used to easily perform the necessary settings. The modularly structured I/O modules are unique in that they allow the sensor and actuator wiring to be designed in both a robust and plug-in manner. This allows the electronics to be replaced at any time even with permanent wiring without downstream I/O module operations being affected. This achieves an invaluable time saving, in terms of both wiring inaccessible cabinets and rapidly replacing sensors. Thanks to the PUSH IN technology for up to.5 mm, in their narrowest form of.5 mm, the modularly structured u-remote I/O modules can be used for all sensor and actuator connections with a very high connection density. clear status and diagnosis display on the connection also ensures rapid and precise checks for individual sensors and actuators.

10 DP-V; Web server tool; Sub-D connection IP 0 In automation technology, the PROFIBUS-DP standard enables the controlled incorporation of sensors and actuators via one central control unit. The UR0-FBC- PB-DP eld bus coupler is a PROFIBUS-DP- participant certied by the Probus user organisation. With options for connecting up to 6 u-remote participants, it serves as the head module for the u-remote system bus. The PROFIBUS-DP coupler has a Sub-D plug-in connector and supports all services according to the DP- specication. Two rotary coding switches are used to address individual PROFIBUS participants. The coupler can be activated with a system-independent web server application via the USB service interface. ll information, such as diagnoses, status values and parameters, can therefore be read out. ll connected inputs can also be simulated or outputs set. The initial system power supply is already integrated in the eld bus coupler. Power is supplied via two -pin connectors, separated into the input and output current paths. Since the PROFIBUS-DP products from Weidmüller make full use of all the latest technological possibilities, such as SD les and diagnosis messages, they actively support your application in the most important tasks from engineering and commissioning fault diagnosis. ore Performance. Simplied. Block diagram UR0-FBC-PB-DP USB 8x μc Internal from the control card Systembus Systembus Systembus DC U SYS U SYS Sub-D V/0 Input U IN DC U IN U IN U OUT U OUT U OUT V/0 Output UR0 PROFIBUS coupler

0 current paths ddress can be set using rotary switch Web server System supply of 6 I/O modules Temperature range 0 60 POFIBS DP-V up to MBaud IP 0 onnection Field bus protocol Process data Parameter

11 0 current paths ddress can be set using rotary switch Web server System supply of 6 I/O modules Temperature range 0 60 POFIBS DP-V up to MBaud IP 0 onnection Field bus protocol Process data Parameter data Diagnostic data Ma. number of I/O modules onguration interface Transmission rate of eld bus Transmission speed of u-remote system bus Supply Supply voltage for system and inputs Supply voltage for outputs Feed current for input modules ma. Feed current for output modules ma. urrent consumption I IN in power segment of eld bus coupler typ. Weight Dimensions /W/D -pin SB-D connector POFIBS DP-V 88 Bytes Bytes Bytes 6 SB.0 Mbit/s 8 Mbit/s V D 0 / 5 V D 0 / m 0 g 0 mm with catch lever 8 mm 5 mm 76 mm Download of SD-le on Field bus coupler, POFIBS DP-V Type Qty. 0-FB-PB-DP termination kit 0-B- is included in the coupler package ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SDVP PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM TM 0 WS SO 0 DIN WS P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

12 IP 0 Web server tool; two 5 ports; 00 Mbit/s PROFINET is gaining in importance as a rapidly growing Industrial Ethernet Standard. By supporting real-time functionality (RT) and isochronous real-time functionality (IRT), the technology complies with modern system and application requirements to a large extent. The UR0-FBC-PN-IRT eld bus coupler is a PROFINET-IRT participant certied by the PROFIBUS user organisation. It is able to connect up to 6 u-remote participants and two Ethernet ports with integrated switch to implement a line network structure. The coupler can be activated with a system-independent web server application via the USB service interface or the Ethernet ports. ll information, such as diagnoses, status values and parameters, can therefore be read out. ll connected inputs can also be simulated or outputs set. The initial system power supply is already integrated in the eld bus coupler. Power is supplied via two -pin connectors, separated into the input and output current paths. Since the PROFIBUS products from Weidmüller make full use of all the latest technological possibilities, such as SD les and diagnosis messages, they actively support your application in the most important tasks from engineering and commissioning to faults. ore Performance. Simplied. Block diagram UR0-FBC-PN-IRT USB 8x μc Internal from the control card Systembus Systembus Systembus DC U SYS U SYS RJ5 V/0 Input DC U IN U IN U IN RJ5 U OUT U OUT U OUT V/0 Output UR0 PROFINET coupler

13 0 current paths Web server System supply of 6 I/O modules Temperature range 0 60 POFINT IT/T capable POFINT diagnosis LLDP Neighborhood detection IP 0 onnection Field bus protocol Process data Parameter data Diagnostic data Fast startup Ma. number of I/O modules onguration interface Transmission rate of eld bus Transmission speed of u-remote system bus Supply Supply voltage for system and inputs Supply voltage for outputs Feed current for input modules, ma. Feed current for output modules, ma. urrent consumption I IN in power segment of eld bus coupler, typ. Weight Dimensions /W/D -5 POFINT IT.0 Bytes.85 Bytes.85 Bytes 6 SB.0 00 Mbit/s 8 Mbit/s V D 0 / 5 V D 0 / m 0 g 0 mm with catch lever 8 mm 5 mm 76 mm Download of SD-le on Field bus coupler, POFINT IT Type Qty. 0-FB-PN-IT termination kit 0-B- is included in the coupler package ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM TM 0 WS SO 0 DIN WS P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

14 IP 0 Web server tool; two 5 ports; 0/00 Mbit/s EtherCT is a popular eld bus standard for systems with stringent time requirements. The UR0-FBC-EC eld bus coupler is an EtherCT participant certied by the EtherCT Technology roup. With options for connecting up to 6 u-remote participants, it serves as the head module for the u-remote system bus. The EtherCT coupler has two Ethernet ports with integrated switch for implementing a line network structure. The coupler can be activated with a system-independent web server application via the USB service interface or the Ethernet ports. ll information, such as diagnoses, status values and parameters, can therefore be read out. ll connected inputs can also be simulated or outputs set. The system's initial power supply is already integrated in the eld bus coupler. Power is supplied via two -pin connectors, separated into the input and output current paths. Since the EtherCT products from Weidmüller make full use of all the latest technological possibilities, such as use of L les, they actively support your application in the most important tasks from engineering and commissioning to fault diagnosis. ore Performance. Simplied. Block diagram UR0-FBC-EC USB 8x μc Internal from the control card Systembus Systembus Systembus DC U SYS U SYS RJ5 V/0 Input DC U IN U IN U IN RJ5 U OUT U OUT U OUT V/0 Output UR0 EtherCT coupler

15 0 current paths Web server System supply of 6 I/O modules Temperature range 0 60 Various thert services IP 0 onnection Field bus protocol Process data Parameter data Diagnostic data Ma. number of modules onguration interface Transmission rate of eld bus Transmission speed of u-remote system bus Supply Supply voltage for system and inputs Supply voltage for outputs Feed current for input modules, ma. Feed current for output modules, ma. urrent consumption I IN in power segment of eld bus coupler, typ. Weight Dimensions /W/D -5 thert 8 kbytes.0 Bytes.0 Bytes 6 SB.0 00 Mbit/s 8 Mbit/s V D 0 / 5 V D 0 / m 0 g 0 mm with catch lever 8 mm 5 mm 76 mm Download of SI-le on Field bus coupler, thert Type Qty. 0-FB termination kit 0-B- is included in the coupler package ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM TM 0 WS SO 0 DIN WS P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

16 IP 0 Web server tool; two 5 ports; 0/00 Mbit/s System safety around the globe is provided by the Modbus-TCP version, which is stated in IEC65 as an Industrial Ethernet Standard. The UR0-FBC-MOD-TCP from Weidmüller is a eld bus coupler designed in accordance with IEC 65. With options for connecting up to 6 u-remote participants, it serves as the head module for the u-remote system bus. The coupler can be activated with a system-independent web server application via the USB service interface or the Ethernet ports. ll information, such as diagnoses, status values and parameters, can therefore be read out. ll connected inputs can also be simulated or outputs set. The system's initial power supply is already integrated in the eld bus coupler. Power is supplied via two -pin connectors, separated into the input and output current paths. Since the Modbus-TCP products from Weidmüller make full use of all the latest technological possibilities, such as diagnosis options, they actively support your application in the most important tasks from engineering and commissioning to fault diagnosis. More Performance. Simplied. Block diagram UR0-FBC-MOD-TCP USB 8x μc Internal from the control card Systembus Systembus Systembus DC U SYS U SYS RJ5 V/0 Input DC U IN U IN U IN RJ5 U OUT U OUT U OUT V/0 Output UR0 Modbus-TCP coupler

0 current paths Various Modbus services Web server System supply of 6 I/O modules Temperature range 0 60 IP 0 onnection Field bus protocol Process data Parameter data Diagnostic data Ma.

input modules, ma. Feed current for output modules, ma. urrent consumption I IN in power segment of eld bus coupler, typ. Weight Dimensions /W/D -5 Modbus TP 8 kbytes.0 Bytes.0 Bytes 6 SB.

17 0 current paths Various Modbus services Web server System supply of 6 I/O modules Temperature range 0 60 IP 0 onnection Field bus protocol Process data Parameter data Diagnostic data Ma. number of modules onguration interface Transmission rate of eld bus Transmission speed of u-remote system bus Supply Supply voltage for system and inputs Supply voltage for outputs Feed current for input modules, ma. Feed current for output modules, ma. urrent consumption I IN in power segment of eld bus coupler, typ. Weight Dimensions /W/D -5 Modbus TP 8 kbytes.0 Bytes.0 Bytes 6 SB.0 00 Mbit/s 8 Mbit/s V D 0 / 5 V D 0 / m 0 g 0 mm with catch lever 8 mm 5 mm 76 mm Field bus coupler, Modbus TP Type Qty. 0-FB-MOD-TP termination kit 0-B- is included in the coupler package ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM TM 0 WS SO 0 DIN WS P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

18 Positive switching; everse polarity protection IP 0 Digital input modules from Weidmüller are available in different versions and are used primarily to receive binary control signals from sensors, transmitters, switches or proximity switches. Thanks to their exible design, they will satisfy your need for well co-ordinated proect planning with reserve potential. ll modules are available with, or 6 inputs and comply fully with IEC 6-. The digital inputs are for Type and Type sensors in accordance with the standard. With a maximum input frequency of up to khz, they are used in many different applications. The variant for PLC interface units enables rapid cabling to the proven Weidmüller interface sub-assemblies using system cables. This ensures rapid incorporation into your overall system. Two modules with a timestamp function are able to capture binary signals and to provide a timestamp in s resolution. The module electronics supply the connected sensors from the input current path (U IN ). UR0-DI-P block diagram example Systembus U SYS U IN U OUT μc UR0 DI-P Type IN V DC IN DI_0 DI_ DI_0 V DC DI_ V DC DI_ V DC DI_ V DC

digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire, -wire, -wiref connection Input lter can be set channel by channel

19 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire, -wire, -wiref connection Input lter can be set channel by channel Integrated sensor supply Types and acc. to I 6- IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m m sensor feed Types and, I 6- adjustable, up to 0 ms < 5 V > V -wire, -wire, -wiref no 87 g 0 mm with catch lever 8 mm,5 mm 76 mm DI0 V DC DI V DC DI V DC DI V DC DI P DI P DI0 V DC DI V DC DI V DC DI V DC DI P DI0 V DC DI V DC DI V DC DI V DC Digital input module, channels Type Qty. 0-DI-P ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

IP 0 8 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire connection Input lter can be set channel by channel Types and

20 IP 0 8 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire connection Input lter can be set channel by channel Types and acc. to I 6- Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < m 8 Types and, I 6- adjustable, up to 0 ms < 5 V > V no -wire no 8 g 0 mm with catch lever8 mm,5 mm 76 mm DI0 V DC DI V DC DI V DC DI V DC DI V DC DI5 V DC DI6 V DC DI7 V DC 8DI P-W Digital input module, 8 channels, -wire Type Qty. 0-8DI-P-W ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

8 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire and -wire connection Input lter can be set channel by channel

21 8 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire and -wire connection Input lter can be set channel by channel Integrated sensor supply Types and acc. to I 6- IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < m sensor feed 8 Types and, I 6- adjustable, up to 0 ms < 5 V > V -wire, -wire no 8 g 0 mm with catch lever8 mm,5 mm 76 mm DI0 V DC DI DI V DC DI DI V DC DI5 DI6 V DC DI7 8DI-P-W Digital input module, 8 channels, -wire Type Qty. 0-8DI-P-W ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

22 IP 0 8 plugs with connections per module 8 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching everse polarity protection -wire and -wire connection Input lter can be set channel by channel Integrated sensor supply Types and acc. to I 6- * ) * 5 ) * ) Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < 0 m sensor feed 8 Types and, I 6- adjustable, up to 0 ms < 5 V > V maimum 50 m per channel -wire, -wire no 8 g 0 mm with catch lever8 mm,5 mm 76 mm Please order connector separately Digital input module, 8 channels, -wire, D plug Type Qty. 0-8DI-P-W-D ccessories oding elements Termination kit Swivel marker D-Plug Stripping tool 5 Pressing tool Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PG multi-stripa PW-0-D D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

23 6 digital inputs Positive switching everse polarity protection -wire connection Permanently set input lter, ms Types and acc. to I 6- IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < m 6 Types and, I 6- ms < 5 V > V no -wire no 87 g 0 mm with catch lever8 mm,5 mm 76 mm DI0 DI DI DI DI DI5 DI6 DI7 DI8 DI9 DI0 DI DI DI DI DI5 6DI P V DC Digital input module, 6 channels Type Qty. 0-6DI-P ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

24 IP 0 6 digital inputs Positive switching everse polarity protection For connecting a PL interface element Permanently set input lter, ms Types and acc. to I 6- Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN eternal Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < m 6 Types and, I 6- ms < 5 V > V eternal PL interface no 7 g 0 mm with catch lever8 mm,5 mm 76 mm 9 V DC V DC 6DI P x DI Digital input module, 6 channels, PL interface Type Qty. 0-6DI-P-PL-INT ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit PL interface element Pre-assembled cable, m Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP S 6IO W S P-NIV-0-L-M roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching -wire, -wire, -wiref connection Input lter can be set channel by channel Types and acc.

25 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching -wire, -wire, -wiref connection Input lter can be set channel by channel Types and acc. to I 6- μs Timestamp resolution IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Data width Timestamp esolution Timestamp Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < 0 m sensor feed Type und, I 6- adjustable, up to 0 ms < 5 V > V -wire, -wire, -wiref no 6 Bit μs 8 g 0 mm with catch lever 8 mm.5 mm 76 mm DI0 V DC DI V DC DI TS DI TS DI0 V DC DI V DC DI TS DI0 V DC DI V DC Digital input module, channels, Timestamp Type Qty. 0-DI-P-TS ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

IP 0 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching -wire, -wire, -wiref connection Input lter can be set channel by channel Types and acc.

26 IP 0 digital inputs for sensors such as transmitters, switches and proimity sensors Positive switching -wire, -wire, -wiref connection Input lter can be set channel by channel Types and acc. to I 6- μs Timestamp resolution Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input Type Input lter Input voltage, low Input voltage, high Sensor supply Sensor connection everse polarity protection Module diagnosis Individual channel diagnosis Data width Timestamp esolution Timestamp Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < 0 m sensor feed Types and, I 6- adjustable, up to 0 ms < 5 V > V -wire, -wire, -wiref no 6 Bit μs 87 g 0 mm with catch lever 8 mm.5 mm 76 mm DI0 V DC DI V DC DI V DC DI V DC DI TS DI TS DI0 V DC DI V DC DI V DC DI V DC DI TS DI0 V DC DI V DC DI V DC DI V DC Digital input module, channels, Timestamp Type Qty. 0-DI-P-TS ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

27 IP 0

28 Positive switching; short-circuit-proof; up to -wiref IP 0 Digital output modules are available in the following variants DO, DO with -wire technology, 6DO with or without PLC interface connection. They are used primarily for incorporating decentralised actuators. ll outputs are designed for DC- actuators acc. to DINEN and IEC 6- specications. ust like the digital input modules, frequencies of up to khz are possible. Maximum system safety is ensured by protecting the outputs. This consists of an automatic restart following a short-circuit. Clearly recognisable LEDs also signal the status of the entire module as well as individual channels. In addition to the standard applications of the digital output modules, the portfolio also includes special variants, such as the RO-SSR module for rapidly switching applications. Fitted with solid state technology, 0.5 is available for each output. Furthermore, there is also the RO-CO relay module for power-intensive applications. This is equipped with four change-over contacts, optimised for a switching voltage of 77 C and designed for a switching current of 6. To serve negative switching requirements there is a parameterisable version of the DO Module. The module electronics supply the connected actuators from the output current path (U OUT ). UR0-DO-P block diagram example Systembus U SYS U IN U OUT μc UR0 DO-P OUT V DC OUT DO_0 DO_ DO_0 V DC DO_ V DC DO_ V DC DO_ V DC

29 digital outputs an be loaded up to 0.5 per channel Short-circuit-proof -wire, -wire, -wiref connection Positive switching D- load I 6- compliant IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type of load esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Non reactiv Module diagnosis Individual channel diagnosis Shut-down energy inductive esponse time of protective circuit current limitation Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m load ohmic, inductive, lamp load 00 μs 50 μs 0.5 k k -wire, -wire, -wiref thermal no 50 m / channel < 00 μs ambient temperature dependent 86 g 0 mm with catch lever8 mm,5 mm 76 mm DO0 V DC DO V DC DO V DC DO V DC DO P DO P DO0 V DC DO V DC DO V DC DO V DC DO P DO0 DO DO DO Digital output module, channels Type Qty. 0-DO-P For this and additional technical data, please refer to the manual available at or scan the Q code below. ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

IP 0 digital outputs Module can be loaded up to 8 an be loaded up to per channel Short-circuit-proof -wire, -wire, -wiref connection Positive switching D- load I 6- compliant Interface Transmission

30 IP 0 digital outputs Module can be loaded up to 8 an be loaded up to per channel Short-circuit-proof -wire, -wire, -wiref connection Positive switching D- load I 6- compliant Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type of load esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Non reactiv Module diagnosis Individual channel diagnosis Shut-down energy inductive esponse time of protective circuit current limitation Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m load ohmic, inductive, lamp load 00 μs 50 μs 8 k k -wire, -wire, -wiref thermal no 50 m / channel < 00 μs ambient temperature dependent 86 g 0 mm with catch lever8 mm,5 mm 76 mm DO0 V DC DO V DC DO V DC DO V DC DO P- DO P- DO0 V DC DO V DC DO V DC DO V DC DO P- DO0 DO DO DO Digital output module, channels, Type Qty. 0-DO-P For this and additional technical data, please refer to the manual available at or scan the Q code below. ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

digital outputs Module can be loaded up to 8 an be loaded up to per channel Short-circuit-proof Positive or negative switching -wire, -wire, -wiref connection I 6- compliant IP 0 Interface

31 digital outputs Module can be loaded up to 8 an be loaded up to per channel Short-circuit-proof Positive or negative switching -wire, -wire, -wiref connection I 6- compliant IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Positive or negative switching Type of load esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Ohm Inductive load D Lamp load W ctuator connection Short-circuit-proof Non reactiv Module diagnosis Individual channel diagnosis Shut-down energy inductive esponse time of protective circuit current limitation Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m load parameterise ohmic, inductive, lamp load 00 μs 50 μs 8 k k -wire, -wire, -wiref thermal no 50 m / channel < 00 μs ambient temperature dependent 87 g 0 mm with catch lever 8 mm.5 mm 76 mm DO0 V DC DO V DC DO V DC DO V DC DO0 V DC DO V DC DO V DC DO PN- DO P- M M DO PN- DO0 V DC DO V DC DO V DC DO V DC DO P- DO0 DO DO Digital output module, channels, positively or negatively switching Type Qty. 0-DO-PN For this and additional technical data, please refer to the manual available at or scan the Q code below. DO V DC DO ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

32 IP 0 8 digital outputs an be loaded up to 0.5 per channel Short-circuit-proof -wire connection Positive switching D- load I 6- compliant Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type of load esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Non reactiv Module diagnosis Individual channel diagnosis Shut-down energy inductive esponse time of protective circuit current limitation Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m load 8 ohmic, inductive, lamp load 00 μs 50 μs 0.5 k k -wire thermal no 50 m / channel < 00 μs ambient temperature dependent 87 g 0 mm with catch lever8 mm,5 mm 76 mm DO0 DO DO DO DO DO5 DO6 DO7 8DO P Digital output module, 8 channels ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. 0-8DO-P For this and additional technical data, please refer to the manual available at or scan the Q code below. Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

33 6 digital outputs an be loaded up to 0.5 per channel Short-circuit-proof -wire connection Positive switching D- load I 6- compliant IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type of load esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Non reactiv Module diagnosis Individual channel diagnosis Shut-down energy inductive esponse time of protective circuit current limitation Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m load 6 ohmic, inductive, lamp load 00 μs 50 μs k k -wire thermal no 50 m / channel < 00 μs ambient temperature dependent 8 g 0 mm with catch lever8 mm,5 mm 76 mm DO0 DO DO DO DO DO5 DO6 DO7 DO8 DO9 DO0 DO DO DO DO DO5 6DO P Digital output module, 6 channels Type Qty. 0-6DO-P For this and additional technical data, please refer to the manual available at or scan the Q code below. ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

34 IP 0 6 digital outputs an be loaded up to 0.5 per channel Short-circuit-proof For connecting a PL interface element Positive switching D- load I 6- compliant Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT eternal Number Type of load esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Non reactiv Module diagnosis Individual channel diagnosis Shut-down energy inductive esponse time of protective circuit current limitation Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m load 6 ohmic, inductive, lamp load 00 μs 50 μs with supply via a at ribbon cable k k PL interface thermal no 50 m / channel < 00 μs ambient temperature dependent 8 g 0 mm with catch lever8 mm,5 mm 76 mm 9 V DC V DC 6DO P x DO Digital output module, 6 channels, PL interface ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit PL interface element Pre-assembled cable, m Type Qty. 0-6DO-P-PL-INT For this and additional technical data, please refer to the manual available at or scan the Q code below. Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP S 6IO W S P-NIV-0-L-M roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

35 digital outputs an be loaded up to 0.5 per channel Solid-state relay IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. Short-circuit-proof Non reactiv Switching voltage ma. Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < 5 m SS /Triac ma. 0 ms, ero-crossing-detection ma. 0 ms, ero-crossing-detection no 77 V no 8 g 0 mm with catch lever8 mm,5 mm 76 mm RO SSR COM0 N.O.0 COM N.O. COM N.O. COM N.O. 0 V ~ max. 0 V ~ max. 0 V ~ max. 0 V ~ max. Digital output module, channels, SS Type Qty. 0-O-SS For this and additional technical data, please refer to the manual available at or scan the Q code below. ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

36 digital outputs an be loaded up to 6 per channel elay output, change-over contact Switching voltage 77 V /D IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. Short-circuit-proof Non reactiv Switching voltage ma. Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m < 5 m hange-over contact 0 ms 0 ms 5 at 60 / 6 at 55 0 at 60 / at 55 5 no 77 V /D no 8 g 0 mm with catch lever8 mm,5 mm 76 mm RO CO55 N.C.0 COM0 N.O.0 N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. Digital output module, channels, relay Type Qty. 0-O-O For this and additional technical data, please refer to the manual available at or scan the Q code below. ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

37 IP 0

38 IP 0 00 k; -Bit ounter data width; Single channel diagnosis In automated systems, it is impossible to imagine industry without the collection of incremental values. Developed specically for these applications Weidmüller now offers two counter modules that can take values with an input frequency of up to 00 khz. The CNT-00 module has two independent counter inputs and is supplemented by the module CNT-00-DO with only one counter, but additional options. Latch-, ate- and Reset input allows external control of the counter. In addition, a digital output can trigger an immediate event, when there are compared values set. The module electronics supply the connected sensors from the input current path (U IN ). UR0-CNT-00-DO block diagram example Systembus U SYS μc Type CH0 CH0 B Reset Latch GTE DO CH0 V DC CH0 B DO V DC Reset U IN IN V DC IN Latch V DC GTE U OUT UR0-CNT-00-DO

Latch-, Gate- and eset input ounter data width -Bit Maimum input freuency 00 k Operation mode impulse, direction, -, - or -times Sensor feed Input lter adjustable up to ms One digital output IP 0

39 Latch-, Gate- and eset input ounter data width -Bit Maimum input freuency 00 k Operation mode impulse, direction, -, - or -times Sensor feed Input lter adjustable up to ms One digital output IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number of counter inputs Type Input lter Input voltage, low Input voltage, high Sensor feed Sensor connection everse polarity protection Module diagnosis Single channel diagnosis Input current per channel, ma. ounter data width Input freuency, ma. ounter freuency, ma. Latch-, Gate-, eset-input Operation mode Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m incremental encoder adjustable up to ms < 5 V > V - and -wire no.5 m Bit 00 k 00 k Impulse / direction / -, -, -times 87 g 0 mm with catch lever 8 mm.5 mm 76 mm Digital counter module, channel, 00 k Type Qty. 0-NT-00-DO ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

40 IP 0 ounter data width Bit Maimum input freuency 00 k Operation mode impulse, direction, -, - or -times Sensor feed Input lter adjustable up to ms Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number of counter inputs Type Input lter Input voltage, low Input voltage, high Sensor feed Sensor connection everse polarity protection Module diagnosis Single channel diagnosis Input current per channel, ma. ounter data width Input freuency, ma. ounter freuency, ma. Operation mode Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / - 5 via the system bus 8 m 5 m incremental encoder adjustable up to ms < 5 V > V - and -wire no m Bit 00 k 00 k Impulse / direction / -, -, -times 87 g 0 mm with catch lever 8 mm.5 mm 76 mm CH0 V DC CH0 B CH V DC CHB CNT00 Incremental Incremental CH0 V DC CH0 B CH V DC CH B CNT00 f in f in Digital counter module, channel, 00 k Type Qty. 0-NT ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

ounter data width Bit Maimum input freuency 00 k Operation mode impulse Sensor feed Input lter adjustable up to ms IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage

41 ounter data width Bit Maimum input freuency 00 k Operation mode impulse Sensor feed Input lter adjustable up to ms IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number of counter inputs Type Input lter Input voltage, low Input voltage, high Sensor feed Sensor connection everse polarity protection Module diagnosis Single channel diagnosis Input current per channel, ma. ounter data width Input freuency, ma. Operation mode Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / - 5 via the system bus 8 m 5 m digital input adjustable up to ms < 5 V > V - and -wire no m Bit 00 k Impulse 87 g 0 mm with catch lever 8 mm.5 mm 76 mm Digital freuency counter module, channel, 00 k Type Qty. 0-FNT ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

42 IP 0 Freuency can be adjusted up to 0 k; short-circuit-proof; two PWM outputs s part of the new u-remote system, Weidmüller provides a specialised solution for controlling small motors with current requirements of 0.5 to which can also be used to control valve aps. Here, not only can the switching frequencies be set up to 0 khz, the push/pull output levels can also be used for motor activation, for example, to change direction of rotation. s with all modules in the u-remote system, the characteristics are outstanding from the modular design and interchangeable electronics to the removable and plug-in terminal strip. The module electronics supply the connected actuators from the output current path (U OUT ). UR0-PWM-PN-0.5 block diagram example Systembus μc PWM0 PWM PWM0 V DC U SYS U IN OUT V DC OUT PWM V DC U OUT UR0-PWM-PN-0.5

43 pulse width modulation module outputs an be loaded up to 0.5 per channel Short-circuit-proof Push/pull output Maimum 0 k output freuency adjustable IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type esolution ccuracy esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Module diagnosis Individual channel diagnosis Non reactiv Pulse duty factor Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m Load PWM push/pull output stage Bit Bit < 00 ns < 00 ns 0.5 static, 6 to 0 k static, 6 to 0 k static, 6 to 0 k no 0-00 push/pull or push parameterisable 77 g 0 mm with catch lever8 mm,5 mm 76 mm PWM0 V DC PWM V DC PWM Digital output module, PWM, channels, 0.5 Type Qty. 0-PWM-PN ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

44 IP 0 pulse width modulation module outputs an be loaded up to per channel Short-circuit-proof Push/pull output Maimum 0 k output freuency adjustable Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Type esolution ccuracy esponse time, high esponse time, low Output current per channel, ma. Output current per module, ma. Switching freuency ma. esistive load min. 7 Inductive load D Lamp load W ctuator connection Short-circuit-proof Module diagnosis Individual channel diagnosis Non reactiv Pulse duty factor Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m Load PWM push/pull output stage Bit Bit < 00 ns < 00 ns static, 6 to 0 k static, 6 to 0 k static, 6 to 0 k no 0-00 push/pull or push parameterisable 8 g 0 mm with catch lever8 mm,5 mm 76 mm PWM0 V DC PWM V DC PWM- Digital output module, PWM, channels, Type Qty. 0-PWM-PN ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

45 IP 0

46 IP 0 Input parameters can be set for current or voltage; up to -wiref; ccuracy 0. FS nalogue input modules of the u-remote system are available in many variants with different resolutions and wiring solutions. ariants are available in a - and 6-bit resolution, which record up to analogue sensors with /-0, /-5, 0...0, 0...5,...0,...5, 0...0m or...0 m with maximum accuracy. Each plug-in connector has options for connecting sensors with -wire, -wire and -wire technology. Theparameters for the measurement range can be individually set for each channel. separate status LED is also assigned to each channel. special variant for Weidmüller interface units enables current measurements with a 6-bit resolution at maximum accuracy for sensors at a time (0...0 m or...0 m). The module electronics supply the connected sensors from the input current path (U IN ). UR0-I-UI-6 block diagram example Systembus D μc μc MUX I_0 I_ I_0 0 V V DC U SYS U IN U OUT UR0 I-UI-6 0 V IN V DC IN I_ 0 V V DC I_ 0 V V DC I_ 0 V V DC

47 analogue inputs Parameterisable inputs voltage, current 6-bit resolution -wire, -wire and -wiref connection ccuracy 0. FS IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input esolution ccuracy Sensor supply Sensor connection onversion time Internal resistance Internal resistance I everse polarity protection Module diagnosis Individual channel diagnosis Short-circuit-proof Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m sensor feed. Voltage 05 V, 5 V, 00 V, 0 V, 5 V, 0 V. urrent 00 m, 0 m 6 Bit 0. FS -wire, -wire, -wiref ms 00 k. no 89 g 0 mm with catch lever8 mm,5 mm 76 mm I0 0 V V DC I 0 V V DC I 0 V V DC I 0 V V DC I-UI I0 0 V V DC I 0 V V DC I 0 V V DC I 0 V V DC I-UI nalogue input module, channels, 6 bits Type Qty. 0-I-I ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

48 IP 0 dvanced diagnosis functions analogue inputs Parameterisable inputs voltage, current 6-bit resolution -wire, -wire and -wiref connection ccuracy 0. FS Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input esolution ccuracy Sensor supply Sensor connection onversion time Internal resistance Internal resistance I everse polarity protection Module diagnosis Individual channel diagnosis Short-circuit-proof Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m sensor feed. Voltage 05 V, 5 V, 00 V, 0 V, 5 V, 0 V. urrent 00 m, 0 m 6 Bit 0. FS -wire, -wire, -wiref ms 00 k appro g 0 mm with catch lever8 mm,5 mm 76 mm nalogue input module, channels, 6 bits, diagnosis functions Type Qty. 0-I-I-6-DIG ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

49 plugs with connections per module analogue inputs Parameterisable inputs voltage, current 6-bit resolution -wire, -wire and -wiref connection ccuracy 0. FS * ) * 5 ) IP 0 * ) Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input esolution ccuracy Sensor supply Sensor connection onversion time Internal resistance Internal resistance I everse polarity protection Module diagnosis Individual channel diagnosis Short-circuit-proof Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m sensor feed. Voltage 05 V, 5 V, 00 V, 0 V, 5 V, 0 V. urrent 00 m, 0 m 6 Bit 0. FS -wire, -wire, -wiref ms 00 k appro. 5 no 89 g 0 mm with catch lever8 mm,5 mm 76 mm Please order connector separately nalogue input module, channels, 6 bits, D plug Type Qty. 0-I-I-6-D ccessories oding elements Termination kit Swivel marker D-Plug Stripping tool 5 Pressing tool Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PG multi-stripa PW-0-D D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

IP 0 plugs with connections per module dvanced diagnosis functions analogue inputs Parameterisable inputs voltage, current 6-bit resolution -wire, -wire and -wiref connection ccuracy 0.

50 IP 0 plugs with connections per module dvanced diagnosis functions analogue inputs Parameterisable inputs voltage, current 6-bit resolution -wire, -wire and -wiref connection ccuracy 0. FS * ) * 5 ) * ) Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input esolution ccuracy Sensor supply Sensor connection onversion time Internal resistance Internal resistance I everse polarity protection Module diagnosis Individual channel diagnosis Short-circuit-proof Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m sensor feed. Voltage 05 V, 5 V, 00 V, 0 V, 5 V, 0 V. urrent 00 m, 0 m 6 Bit 0. FS -wire, -wire, -wiref ms 00 k appro g 0 mm with catch lever8 mm,5 mm 76 mm Please order connector separately nalogue input module, channels, 6 bits, diagnosis functions, D plug Type Qty. 0-I-I-6-DIG-D ccessories oding elements Termination kit Swivel marker D-Plug Stripping tool 5 Pressing tool Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PG multi-stripa PW-0-D D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

51 analogue inputs Parameterisable inputs voltage, current -bit resolution -wire, -wire and -wiref connection ccuracy 0.5 FS IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Input esolution ccuracy Sensor supply Sensor connection onversion time Internal resistance Internal resistance I everse polarity protection Module diagnosis Individual channel diagnosis Short-circuit-proof Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 5 m sensor feed. Voltage 05 V, 5 V, 00 V, 0 V, 5 V, 0 V. urrent 00 m, 0 m Bit 0,5 FS -wire, -wire, -wiref ms 00 k. no 87 g 0 mm with catch lever8 mm,5 mm 76 mm I0 0 V V DC I 0 V V DC I 0 V V DC I 0 V V DC I-UI- U, I U, I U, I U, I I0 0 V I 0 V V DC I 0 V V DC I 0 V V DC I-UI- I I I I nalogue input module, channels, bits Type Qty. 0-I-I ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

52 IP 0 8 analogue inputs apid cabling with at ribbon cable 0/ to 0 m with 0. accuracy with a 6-bit resolution Inputs can be parameterised passive or active operating mode Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN eternal Number Input esolution ccuracy Sensor supply Sensor connection onversion time Internal resistance I everse polarity protection Module diagnosis Individual channel diagnosis Short-circuit-proof Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m 8 urrent input 6 Bit 0. FS eternal PL interface ms appro. 50 no 7 g 0 mm with catch lever8 mm,5 mm 76 mm 9 V DC V DC I I 0 8 x I... nalogue input module, 8 channels, PL interface Type Qty. 0-8I-I-PL-INT ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit PL interface element Pre-assembled cable, m Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP S 6IO W S P-NIV-0-L-M roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

53 IP 0

54 IP 0 vailable for T and TD; 6-bit resolution; 50/60 suppression The recording of resistance temperature and thermocoupler sensors is indispensable for many applications. The -channel input modules from Weidmüller are designed for all common thermal elements and resistance temperature sensors. With an accuracy of 0. % of the measurement range end value and a resolution of 6 bits, cable breaks and instances of the limit value being exceeded or falling below are detected by means of individual channel diagnosis. dditional features such as an automatic 50-Hz to 60-Hz suppression or external as well as internal cold-unction compensation, as are available with the TC module, round off the scope of function. The module electronics supply the connected sensors from the input currentpath(u IN ). UR0-I-TC-DIG block diagram example Systembus μc μc D CJC_0 + TC_0 + TC_0 CJC_0 U SYS U IN DC DC CJC Intern MUX CJC_ + TC_ + TC_ CJC_ CJC_+ TC_ + TC_ CJC_ CJC_ + TC_ + TC_ CJC_ U OUT UR0 I-TC-DIG

55 analogue inputs Various T sensors igh accuracy of 0. FS 6-bit resolution Individual channel diagnosis Internal or eternal cold-junction compensation possible utomatic 50 and 60 suppression IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Sensor type esolution ccuracy Sensor connection old-junction compensation Temperature coefcient Temperature range onversion time Internal resistance Module diagnosis Individual channel diagnosis everse polarity protection Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m,, T, B, N,,, S, L,,, mv 6 Bit 0, FS 0 V -wire internal and eternal int. accuracy 50 ppm/ ms, adjustable > M 86 g 0 mm with catch lever8 mm,5 mm 76 mm CJC0+ TC0+ TC0 CJC0 CJC+ TC+ TC CJC CJC+ TC+ TC CJC CJC+ TC+ TC CJC I TC J J J J nalogue input module, channels, thermocouple Type Qty. 0-I-T-DIG ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

IP 0 6-bit resolution Individual channel diagnosis utomatic 50 and 60 suppression For -, - and -wire TDs igh accuracy For virtually all common sensors Temperature measurement via resistor Interface

56 IP 0 6-bit resolution Individual channel diagnosis utomatic 50 and 60 suppression For -, - and -wire TDs igh accuracy For virtually all common sensors Temperature measurement via resistor Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I IN in the respective power segment Number Sensor type esolution ccuracy Sensor connection Temperature coefcient Temperature range onversion time Internal resistance everse polarity protection Module diagnosis Individual channel diagnosis Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 0 m Pt00, Pt00, Pt500, Pt000, Ni00, Ni0, Ni00, Ni500, Ni000, u0, resistors with 0, 80, 50, 00, 500, k, k, k 6 Bit 0. FS, 0. FS for Ni sensors, 0.6 FS for u0 -wire, -wire, -wire 50 ppm/ ms adjustable > M 9 g 0 mm with catch lever8 mm,5 mm 76 mm RTD0+ Sense0+ Sense0 RTD0 RTD+ Sense+ Sense RTD RTD+ Sense+ Sense RTD RTD+ Sense+ Sense RTD I RTD I RTD RTD0+ Sense0+ RTD0 RTD+ Sense+ RTD RTD+ Sense+ RTD RTD+ Sense+ RTD I RTD RTD0+ RTD0 RTD+ RTD RTD+ RTD RTD+ RTD nalogue input module, channels, TD Type Qty. 0-I-TD-DIG ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

57 IP 0

58 - or -wire connection; 6-bit resolution; outputs IP 0 The analogue output module controls up to analogue actuators with /-0, /-5, 0...0, 0...5,...0,...5, m or...0 m with an accuracy of 0.05 % of the measurement range end value. n actuator with - or -wire technology can be connected to each plug-in connector. The outputs are dened channel by channel using parameterisation. separate status LED is assigned to each channel. The outputs are supplied from the output current path (U OUT ). Block diagram UR0-O-UI-6 Systembus U SYS μc μc 6 Bit D D O0 + Sense0 + Sense0 O0 O + Sense + Sense O U IN U OUT DC DC UR0 O-UI-6 D D O + Sense + Sense O O + Sense + Sense O

59 analogue outputs Outputs can be parameterised by channel voltage, current 6-bit resolution - and -wire connection ccuracy typ FS eplacement values can be set per channel Non reactiv Short-circuit-proof IP 0 Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Output esponse time esolution ccuracy Load resistance, voltage output Load resistance, current output ctuator connection Temperature coefcient Ma. error between T min. and T ma. Monotonicity rosstalk between the channels epeat accuracy Output waviness Module diagnosis eplacement values Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 85 m. Voltage 05 V, 00 V, 5 V, 0 V, 5 V. urrent 00 m or 0 m ms for channels 6 Bit 0. FS ma., 0.05 FS typ. > k at > 50 ambient temperature ma. sum of sensor current = 5 m < 600 -wire current and voltage, - and -wire voltage, -wire automatic detection 0 ppm Voltage / ppm current measurement / 0 ppm FS 0,00 FS < mv effectively ma g 0 mm with catch lever8 mm,5 mm 76 mm O0+ Sense0+ Sense0 O0 O+ Sense+ Sense O O+ Sense+ Sense O O+ Sense+ Sense O O-UI O-UI O0+ O0 O+ O O+ O O+ O nalogue output module, channels, 6 Bit Type Qty. 0-O-I ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect.

60 IP 0 dvanced diagnosis functions analogue outputs Outputs can be parameterised by channel voltage, current 6-bit resolution - and -wire connection ccuracy typ FS eplacement values can be set per channel Non reactive Short-circuit-proof Interface Transmission rate of system bus Galvanic isolation Supply Voltage supply urrent consumption I IN in power segment of eld bus coupler, typ. urrent consumption I OT in the respective power segment Number Output esponse time esolution ccuracy Load resistance, voltage output Load resistance, current output ctuator connection Temperature coefcient Ma. error between T min. and T ma. Monotonicity rosstalk between the channels epeat accuracy Output waviness Module diagnosis inelkanaldiagnose eplacement values Weight Dimensions /W/D u-remote system bus 8 Mbit/s, D 500 V between current paths V D 0 / 5 via the system bus 8 m 85 m. Voltage 05 V, 00 V, 5 V, 0 V, 5 V. urrent 00 m or 0 m ms for channels 6 Bit 0. FS ma., 0.05 FS typ. > k at > 50 ambient temperature ma. sum of sensor current = 5 m < 600 -wire current and voltage, - and -wire voltage, -wire automatic detection 0 ppm Voltage / ppm current measurement / 0 ppm FS 0,00 FS < mv effectively ma g 0 mm with catch lever8 mm,5 mm 76 mm nalogue output module, channels, 6 Bits, diagnosis functions Type Qty. 0-O-I-6 -DIG ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

61 IP 0

62 0 feeding; input or output current path; diagnosis visualisation IP 0 Weidmüller power-feed modules are available to refresh the power of the input and output current path. These feed 0, monitored by the voltage diagnosis display, in the corresponding input or output path. The time-saving commissioning is guaranteed by the standard u-remote plug with proven and tested PUSH IN technology for reliable contacting. The power supply is monitored by a diagnosis display. Block diagram UR0-PF-I and UR0-PF-O

PF-I Power supply in input current path Power supply current 0 Integrated diagnosis display IP 0 Supply Voltage supply for inputs Maimum feed current for input modules urrent consumption I IN in the

63 PF-I Power supply in input current path Power supply current 0 Integrated diagnosis display IP 0 Supply Voltage supply for inputs Maimum feed current for input modules urrent consumption I IN in the respective power segment Weight Dimensions /W/D V D 0 / m 76 g 0 mm with catch lever8 mm,5 mm 76 mm PF-I Power supply module ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. 0-PF-I Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-PF-I-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. V DC V DC Product standard I 6- M N 6000 T N L L 508 Let s connect.

Power supply in output current path Power supply current 0 Integrated diagnosis display IP 0 Supply Voltage supply for outputs Maimum feed current for output modules urrent consumption I OT in the

64 Power supply in output current path Power supply current 0 Integrated diagnosis display IP 0 Supply Voltage supply for outputs Maimum feed current for output modules urrent consumption I OT in the respective power segment Weight Dimensions /W/D V D 0 / m 76 g 0 mm with catch lever8 mm,5 mm 76 mm PF-O Power supply module Type Qty. 0-PF-O ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-PF-O-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. V DC V DC Product standard I 6- M N 6000 T N L L 508 Let s connect.

65 IP 0

66 IP 0 SIL ; OSSD output; wire breakage and short-circuit detection Safety technology is of central importance in the automation industry and machine construction. When attempting to reduce risks and avoid putting people and the environment in danger, you need solutions which satisfy stringent requirements and statutory specications. The safety modules of the u-remote system have key features such as emergency stop circuits and wire breakage/ short-circuit detection. They satisfy all SIL requirements according to IEC 606 and EN ISO -, Category, PL e and support the safe operation of your system. By safely shutting down the downstream output modules, the safety modules attain maximum safety with optimum control. ll input sensors are independently supplied via separate voltage paths and report the current machine status to the control unit. The restart is either performed in manual mode or using the autostart function. Safety modules from Weidmüller also cut maintenance and service times and improve your response times in an emergency thanks to a concept of maximum transparency, e.g. using OSSD output. The module electronics supply the connected actuators from the output current path (U OUT ). UR0-PF-O-DI-SIL block diagram example Systembus μc Safety0.0 Safety0. Safety0. Safety0. Emergency Stop U SYS μc μc Type U IN DC DC Start Start utostart utostart Start Safe V DC OSSD V DC_OSSD V DC Input U OUT UR0 PF-O-DI-SIL

SIL safety standard in accordance with I 606 and DIN N ISO 89-, category, PL e onnection for an emergency stop circuit OSSD output reports status to control unit Pulsed input circuit for wire

67 SIL safety standard in accordance with I 606 and DIN N ISO 89-, category, PL e onnection for an emergency stop circuit OSSD output reports status to control unit Pulsed input circuit for wire breakage and short-circuit detection estart manual or using autostart IP 0 Interface Transmission rate of system bus chievable safety standard Level of diagnostic coverage MTTFD F Supply Supply voltage for system and inputs Supply voltage for outputs Maimum feed current for input modules urrent consumption internal Wire breakage detection Short-circuit detection Weight Dimensions /W/D u-remote system bus 8 Mbit/s I 6508 SIL and DIN N ISO PL e V D 0 / 5 via the system bus V D 0 / 5 8 < 5 m 80 g 0 mm with catch lever8 mm,5 mm 76 mm S S S S Man Start Man Start uto Start uto Start N.C. OSSD V DC PF-O DI Safety module, digital input ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. 0-PF-O-DI-SIL For this and additional technical data, please refer to the manual available at or scan the Q code below. Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SIL-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

IP 0 SIL safety standard in accordance with I 606 and DIN N ISO 89-, category, PL e onnection for an emergency stop circuit OSSD output reports status to control unit Pulsed input circuit for wire

68 IP 0 SIL safety standard in accordance with I 606 and DIN N ISO 89-, category, PL e onnection for an emergency stop circuit OSSD output reports status to control unit Pulsed input circuit for wire breakage and short-circuit detection estart manual or using autostart Interface Transmission rate of system bus chievable safety standard Level of diagnostic coverage MTTFD F Supply Supply voltage for system and inputs Supply voltage for outputs Maimum feed current for input modules urrent consumption internal Wire breakage detection Short-circuit detection Weight Dimensions /W/D u-remote system bus 8 Mbit/s I 6508 SIL and DIN N ISO PL e V D 0 / 5 via the system bus V D 0 / 5 8 < 5 m 8 g 0 mm with catch lever8 mm,5 mm 76 mm S S S S S S S S Man Start Man Start uto Start uto Start N.C. OSSD V DC PF-O DI Safety module, digital inputs ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. 0-PF-O-DI-SIL For this and additional technical data, please refer to the manual available at or scan the Q code below. Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SIL-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

SIL safety standard in accordance with I 606 and DIN N ISO 89-, category, PL e Switch-off after adjustable delay onnection for an emergency stop circuit OSSD output reports status to control unit

69 SIL safety standard in accordance with I 606 and DIN N ISO 89-, category, PL e Switch-off after adjustable delay onnection for an emergency stop circuit OSSD output reports status to control unit Pulsed input circuit for wire breakage and short-circuit detection estart manual or using autostart IP 0 Interface Transmission rate of system bus chievable safety standard Level of diagnostic coverage MTTFD F Supply Supply voltage for system and inputs Supply voltage for outputs Maimum feed current for input modules urrent consumption internal Wire breakage detection Short-circuit detection Weight Dimensions /W/D u-remote system bus 8 Mbit/s I 6508 SIL and DIN N ISO PL e V D 0 / 5 via the system bus V D 0 / 5 8 < 5 m 8 g 0 mm with catch lever8 mm,5 mm 76 mm S S S S S S S S Man Start Man Start uto Start uto Start SS OSSD V DC PF-O DI Safety module, digital inputs, delayed ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. 0-PF-O-DI-DL-SIL For this and additional technical data, please refer to the manual available at or scan the Q code below. Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SIL-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L in preparation L 508 Let s connect.

70 ccessories ccessories Potential distribution modules; system accessories IP 0 wide range of accessory modules is provided for the individual requirements of machine and plant construction. arious potential distribution modules are available for directly supplying sensors with -wire, -wire or -wire connection technology from the remote I/O system. These provide 6 PUSH IN potential points and supply your application with each auxiliary potential available. n empty module, where the system bus and voltage supply are looped through, allows you to plan expansion slots in a system and to start these up without any interruptions if required. UR0-6UX-O block diagram example Systembus U SYS U IN U OUT V DC OUT V DC_ V DC_6 V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC UR0 6UX-O

ccessories Distribution of the various potentials ctuator and sensor supply 6 PS IN potential contacts IP 0 Supply Voltage supply Weight

printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material

via Input- or output path / F 8 g 0 mm with catch lever8 mm,5 mm 76 mm Type Qty.

6 M SD 9 700000 PM.7/.6 M N WS 960 70000 D 5/8-.5 M SD 00 60000 D 5/8-.

0-M-800000-SP 790000 0-M-80000-SP 7500000 0-BM-SP 5 5090000 0-P-770000-SP 5 650000 0-P-790000-SP 5 690000 0-P-800000-SP 5 670000

71 ccessories Distribution of the various potentials ctuator and sensor supply 6 PS IN potential contacts IP 0 Supply Voltage supply Weight Dimensions /W/D Potential distribution module ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit V D 0 / 5 via Input- or output path / F 8 g 0 mm with catch lever8 mm,5 mm 76 mm Type Qty. 0-6-I O F I O Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP M SP M SP M SP M SP BM-SP P SP P SP P SP P SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC V DC UX-O 6-I 6-O 6-F 6--I 6 -O Product standard I 6- M N 6000 T N L L 508 Let s connect. Let s connect. Let s connect. Let s connect. Let s connect.

ccessories Forwarding of system bus and voltage paths Space for subseuent epansion Basis for all I/O modules IP 0 Weight Dimensions /W/D 70 g 0 mm with catch lever8 mm,5 mm 76 mm mpty module Type Qty.

72 ccessories Forwarding of system bus and voltage paths Space for subseuent epansion Basis for all I/O modules IP 0 Weight Dimensions /W/D 70 g 0 mm with catch lever8 mm,5 mm 76 mm mpty module Type Qty. 0-S ccessories oding elements Termination kit Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter lectronics module Basic module Plug-in connector unit Type Qty. OSM B B SM PM.7/.6 M SD PM.7/.6 M N WS D 5/8-.5 M SD D 5/8-.5 M N WS TM 0 G TM 0 WS SO 0 DIN WS M SP BM-SP P SP roll = 000 label = Qty. sheet = 60 label = Qty. Product standard I 6- M N 6000 T N L L 508 Let s connect. Termination kit Includes an end plate and two end brackets Termination kit Type Qty. 0-B

ccessories It goes without saying that Weidmüller also allows you to swap defective parts. The three-part modules can therefore be ordered as individual components.

73 ccessories It goes without saying that Weidmüller also allows you to swap defective parts. The three-part modules can therefore be ordered as individual components. IP 0 0-FB-PB-DP FB-PN-IT FB FB-MOD DI-P DI-P-W DI-P-W DI-P-W-D DI-P DI-P-PL-INT DI-P-TS DI-P-TS DO-P DO-P DO-PN DO-P DO-P DO-P-PL-INT O-SS O-O NT-00-DO NT FNT PWM-PN PWM-PN I-I I-I-6-DIG I-I-6-D I-I-6-DIG-D I-I I-I-PL-INT I-T-DIG I-TD-DIG O-I O-I-6 -DIG PF-I PF-O PF-O-DI-SIL PF-O-DI-SIL PF-O-DI-DL-SIL I O F I O S P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP P SP ll Plug-in connector units Qty. = 5 0-M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP M SP ll electronic modules Qty. = 0-BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-PF-I-SP BM-PF-O-SP BM-SIL-SP BM-SIL-SP BM-SIL-SP BM-SP BM-SP BM-SP BM-SP BM-SP BM-SP ll basic modules Qty. = 5

IP 0 Below you will nd assistance for putting together your system. Please note the maximum number of 6 active modules and the packaging units for the accessories!

t the bottom right-hand side of this page, you will nd assistance for supplying the current paths. Type POFIBS 0-FB-PB-DP 870000.9 POFINT 0-FB-PN-IT 880000. thert 0-FB- 90000.

74 IP 0 Below you will nd assistance for putting together your system. Please note the maximum number of 6 active modules and the packaging units for the accessories! More detailed technical data and product descriptions can be found here in the catalogue in the corresponding chapter. t the bottom right-hand side of this page, you will nd assistance for supplying the current paths. Type POFIBS 0-FB-PB-DP POFINT 0-FB-PN-IT thert 0-FB Modbus 0-FB-MOD-TP DI-P DI-P-W DI-P-W DI-P-W-D DI-P DI-P-PL-INT DI-P-TS DI-P-TS NT-00-DO NT FNT DO-P DO DO-PN DO-P DO-P DO-P-PL-INT O-SS O-O PWM-PN PWM-PN I-I I-I-6-DIG I-I-6-D I-I-6-DIG-D I-I I-I-PL-INT I-TD-DIG I-T-DIG O-I O-I-6-DIG PF-O-DI-SIL PF-O-DI-SIL PF-O-DI-DL-SIL

supply! There is a sample calculation at the 0-PF-I 70000.5 0-PF-O 70000.5 0-6-I 770000.6 0-6-O 780000.6 0-6-F 790000.6 0-6--I 800000.6 0-6--O 80000.6 ccessories nd bracket 660000.

6 mpty module 5770000.6 Thermotransfer version 990000.6 Material Polter Thermotransfer version 90000.6 Material Polter Paper version for Laserprinter 90000.

75 supply! There is a sample calculation at the 0-PF-I PF-O I O F I O ccessories nd bracket Swivel marker onnection marker for pusher custom printing onnection marker for pusher neutral Module marker for custom printing Module marker for neutral mpty module Thermotransfer version Material Polter Thermotransfer version Material Polter Paper version for Laserprinter IP 0 The additional supply calculation is different for each application. Simultaneity factors and current reuirement must be known. To assist you, we have produced the eample shown here in a simplied form. Our eample uses a row of 8-DO modules, i.e. units which can hold four actuator connections each. The actual current needed and therefore the position for a power-feed module to supply the current path can be determined from the mathematical combination of current requirement and simultaneity factor. Please note that u-remote provides an input and an output current path. Both must be included in the additional supply calculation. The system voltage doesn't have to be taken into account. Sample calculation Simultaneity factor culation of simultaneity st module 0-8DO-P nd module 0-8DO-P rd module 0-8DO-P th module 0-8DO-P th module 0-8DO-P th module 0-8DO-P th module 0-8DO-P th module 0-8DO-P th module 0-8DO-P th module 0-8DO-P PF-O th module 0-8DO-P th module 0-8DO-P th module 0-8DO-P Current requirement exceeds 0! The output current path therefore needs an additional supply before the th module. 0 supplied by the UR0-PF-O module. The.55 calculated as remaining after the 0th module must not be added to the 0 after the UR0-PF-O module!

such that all these signals can be collected locally using eldbuses.

76 SI ctive. IP 67 B When constructing machines and plants, sensors and actuators have to be connected to the control unit such that all these signals can be collected locally using eldbuses. The SI ctive product family solves this problem by means of IP 67 protected encapsulation at the very point where the sensors and actuators are located. In the variants with a sub-bus system, this is done very exibly and in a wide range of applications.

77 IP 67 IP 67 IP 67 Introduction B. Quick select SI ctive B.6 SI ctive niversal Overview B.8 B SI ctive niversal POFIBS-DP B.0 SI ctive niversal Nopen B. SI ctive niversal DeviceNet B.8 SI ctive niversal Pro Overview B. SI ctive niversal Pro B. ccessories for sensor cables B.

IP 67 Fleible sensor/actuator coupling to control systems in IP67 area in industrial environment B In both machine and plant construction, sensors and actuators from the entire machine have to

Depending on the machine, the reach, but also the volume of these signals may be very large so that eldbuses and IO systems can be used to collect the signals locally.

In the variants with a sub-bus system, this is done very exibly and in a wide range of applications.

78 IP 67 Fleible sensor/actuator coupling to control systems in IP67 area in industrial environment B In both machine and plant construction, sensors and actuators from the entire machine have to be connected to the control unit. Depending on the machine, the reach, but also the volume of these signals may be very large so that eldbuses and IO systems can be used to collect the signals locally. The SI ctive product family solves this problem by means of IP 67 protected encapsulation at the very point where the sensors and actuators are located. In the variants with a sub-bus system, this is done very exibly and in a wide range of applications. Direct incorporation in the SYS programming environment, rapid denition of causes in the event of faults and a very narrow and lightweight design are the characteristics which make this system unique on the market. Rapid fault rectication Rapid denition of causes in the event of faults by providing extended diagnostic data to the control unit and on the device itself. Efcient engineering Direct incorporation and conguration in the standard PLC engineering systems (such as Step7, RS-Logix, C-Congurator, MELSEC,...)

Universal adaptation The analogue inputs and outputs are freely

50 reduced costs through exible sub-bus concept Sub-bus length of up

extremely wide range of sensor and actuator cables, eldbus cables

79 Universal adaptation The analogue inputs and outputs are freely congurable in the different analogue value ranges. 50 reduced costs through exible sub-bus concept Sub-bus length of up to 50 m with up to 5slaves per sub-bus enables an extremely exible setup. 50 m IP 67 B 5 x Remote I/O system as complete system on the panel n extremely wide range of sensor and actuator cables, eldbus cables and customisable plug-in connectors round off the range. Freedom of choice Support for all common eld bus systems such as PROFIBUS, DeviceNet TM, CNopen, RS.

80 IP 67 Let s connect. B Complex production processes mean that you have to co-ordinate lots of individual processing stages. Numerous sensors and actuators throughout the production facility are connected with the central control system. nd in many cases, you have to bridge huge distances and process a large number of different signals. Weidmüller s SI ctive product range equips you for this production process chain in a practical way. Thanks to IP 67-rated encapsulation, the remote I/O systems can be positioned directly where sensors and actuators are active. The SI-PRO variants with sub-bus system also greatly increase your exibility the sub-bus system SI-PRO can be extended to a length of up to 50 m with up to 5 modules. Up to 0 inputs or outputs are therefore possible on one eldbus node. arious versions of encapsulated SI cables make the sensors and actuators accessible. You can also route eldbus cables straight from the switch cabinet with the energy supply lines using modular, heavy-duty plug-in connectors of the RockStar concept. This allows you to integrate several stages of production into your production facility with ust one single module. Other benets of the SI family include a direct interface to your PLC programming environment and precise error analyses with visual status display. Let s connect.

IP 67 B Remote I/O IP 67 SI ctive Efcient engineering by direct integration into standard PLC system engineering Rapid identication of failure causes by providing enhanced diagnostic data 50 % cost

81 IP 67 B Remote I/O IP 67 SI ctive Efcient engineering by direct integration into standard PLC system engineering Rapid identication of failure causes by providing enhanced diagnostic data 50 % cost reduction by exible sub-bus concept nalogue inputs and outputs have freely congurable analog value Sensor ctuator Cabling Broad range of leadership qualities Free attachable connectors with screw connection up to crimp versions Customised versions and lengths from piece 60 degree shielding Many types from stock

82 M8 M IP SI- M8 PB 6DI SI- M8 PB 6DI/8DO B SI- M8 PB 8DI8DO SI- M PB 6DI SI- M PB 6DI/8DO SI- M PB 8DI8DO SI- M PB I/O/DI SI- M8 N 6DI SI- M8 N 6DI/8DO SI- M N 6DI SI M N 6DI/8DO SI- M N I/O/DI SI- M8 DN 6DI SI M8 DN 6DI/8DO SI- M DN 6DI SI M DN 6DI/8DO SI- M DN I/O/DI SI- M8 PB GW 6DI SI- M PB GW 6DI SI- M DN GW 6DI SI- M8 SB 8DI SI- M8 SB 8DO SI- M8 SB 8DIO SI- M SB 8DI SI- M SB 8DO SI- M SB 8DIO SI- M SB I SI- M SB O SI- M SB ounter SI- M SB Thermo SI- M SB PT00

83 Inputs Special characteristics 6 B.0 ma.. 6, min. 8 ma.. 8, min Ma. I/O channels = 6 B.0 can be congured can be congured Ma. total current, output = 8 B.0 6 B.0 ma. 6, min. 8 ma. 8, min Ma. I/O channels = 6 B.0 can be congured can be congured Ma. total current, output = 8 B.0-00 V, 00 V, B. 00 m, 0 m 6 B. ma. 6, min. 8 ma. 8, min Ma. I/O channels = 6 B. can be congured can be congured 6 B. ma. 6, min. 8 can be congured ma. 8, min. 0 can be congured Ma. I/O channels = 6 B. -00 V, 00 V, B.5 00 m, 0 m 6 B.8 ma. 6, min. 8 ma. 8, min Ma. I/O channels = 6 B.8 can be congured can be congured 6 B.8 ma. 6, min. 8 can be congured ma. 8, min. 0 can be congured Ma. I/O channels = 6 B.8-00 V, 00 V, 00 m, 0 m B.9 IP 67 B 6 B. 6 B. 6 B.6 8 B Ma. total current, output = 8 B.0 ma. 8, min. 0 ma. 8, min Ma. I/O channels = 8 B.0 can be congured can be congured - Ma. total current, output = 8 B Ma. I/O channels = 8 B.0 - Ma. total current, output = ma. 8, min. 0 can be congured ma. 8, min. 0 can be congured Ma. I/O channels = 8 B.0 B. -00 V, 00 V, 00 m, 0 m B. B. B. B.

IP 67 B Compact, basic versions of the Remote I/O system with IP 67 protection The SI ctive Universal consists of basic, compact designed variants that include a variety of modules for digital and

84 IP 67 B Compact, basic versions of the Remote I/O system with IP 67 protection The SI ctive Universal consists of basic, compact designed variants that include a variety of modules for digital and analogue inputs and outputs. The housing has a sturdy construction in compliance with strict industrial requirements. It is resistant against aggressive materials, vibration, shock, temperature, water and dust. The high quality connection system uses conventional, standardised M and M connectors with standardscompliant coding. They ensure a reliable wiring process with less risk of errors. Two M connections for the eldbus allow for a continuous bus installation without any additional T-distributor. The functional earth connection is automatically created when installing on a metallic earthed base.

IP 67 independent voltage circuits The modules can be supplied with up to four different voltage potentials. The module voltage can be simultaneously used for the inputs.

Plug in cross connectors can be used to merge voltage potentials on the module. Efcient diagnostics and status alerts The status of the I/Os is shown directly on the module using arrow icons.

85 IP 67 independent voltage circuits The modules can be supplied with up to four different voltage potentials. The module voltage can be simultaneously used for the inputs. In addition, up to three feed points are available for outputs; these can be switched off individually depending on the application requirements. Plug in cross connectors can be used to merge voltage potentials on the module. Efcient diagnostics and status alerts The status of the I/Os is shown directly on the module using arrow icons. The arrows point to the label and the plug in position. Up to seven status LEDs are available for displaying additional information about the power supply, eldbus status and group diagnostics. The information is simultaneously transmitted to the controller unit via the bus system. B Freedom of choice Total compliance with many industrial eldbus standards this permits integration with all conventional controllers so that the modules can be used in practically all applications. SI ctive Universal supports PROFIBUS-DP, CNopen, DeviceNet communication protocols. M8 M wide variety of variants ll SI ctive modules with digital inputs or digital outputs are optionally available with standard M or M connection systems. For modules in the 6DI/DO series, the conguration can be customised to t the application so that anywhere between 6DI to DI/DO can be used. Output cables with up to per channel are used to connect almost any load. nalogue modules can be congured exibly for the current of voltage outputs.

86 IP 67 B 6 Digital In; 6 Digital In / 8 Digital Out 6 Digital In; 6 Digital In / 8 Digital Out 8 Digital In / 8 Digital Out 8 Digital In / 8 Digital Out Type Qty. SI- M8 PB 6DI SI- M PB 6DI Type Qty. SI- M8 PB 6DI/8DO SI- M PB 6DI/8DO SI- M8 PB 8DI8DO SI- M PB 8DI8DO Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN Supply voltage -OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter ma. current-carrying capacity per output signal Switching frequency load resistive / inductive / inrush Short-circuit-proof Output voltage, low Output voltage, high Ma. total current of outputs Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, B-coded M female 5-pole, B-coded M plug 5-pole, -coded M female 5-pole, -coded 6 M8 socket -pole / 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 0-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms POFIBS-DP Ma. Mbit/s automatic detection Via rotary coding switch 6 GSD file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus M plug 5-pole, B-coded M female 5-pole, B-coded M plug 5-pole, -coded 6 M8 socket -pole / 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 0-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms 0.5, ma. 00 / ma. / ma. 8 es, cut-off for short circuit and error message 0 V D Supply voltage less 0.7 V D 7, 8 POFIBS-DP Ma. Mbit/s automatic detection Via rotary coding switch 6 GSD file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus

87 IP 67 nalogue In / nalogue Out / Digital In Type Qty. SI- M PB I/O/DI B Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN Supply voltage -OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter Measurement range Maimum input voltage in relation to Input resistance load Ma. input current differential Short-circuit-proof esolution / ccuracy Measurement range Output interval Short-circuit-proof esolution / ccuracy Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, B-coded M female 5-pole, B-coded M plug 5-pole, -coded M female 5-pole, -coded 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 0-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms -0 V... 0 V, 0 V... 0V, 0 0 m, 0 m 5 V <5 Ohm -50 m to 50 m protected against polarity reversal es -bit / < V... 0 V, 0 V... 0V, 0 0 m, 0 m 5 ms to 50 ms can be configured es -bit / < 0. POFIBS-DP Ma. Mbit/s automatic detection Via rotary coding switch 6 GSD file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus

IP 67 B When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules.

6 Digital In SI- M PB 6DI 89000000 6 Digital In / 8 Digital Out SI- M PB 6DI/8DO 89000000 nalogue In / nalogue Out / Digital In SI- M PB I/O/DI 890000000 8 Digital In / 8 Digital Out SI- M PB 8DI/8DO

88 IP 67 B When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules. Type Qty. 6 Digital In SI- M PB 6DI Digital In / 8 Digital Out SI- M PB 6DI/8DO nalogue In / nalogue Out / Digital In SI- M PB I/O/DI Digital In / 8 Digital Out SI- M PB 8DI/8DO Digital In SI- M8 PB 6DI Digital In / 8 Digital Out SI- M8 PB 6DI/8DO Digital In / 8 Digital Out SI- M8 PB 8DI/8DO POFIBS cables with female plug and male plug POFIBS cables with female plug and other side open POFIBS cables with male plug and other side open POFIBS plug-in connector POFIBS terminating resistor SIND PB M P B-OD Sensor-actuator cables Sensor-actuator plugs Markers Markers Semi-transparent markers for Printet printing SG 8/.5/. SI an be found in our latest catalogue 8, signal and power transmission, order no M8 Dust cap Sensor connections M Dust cap Sensor connections M Dust cap Bus-out and power-out M Dust cap Bus-in and power-in SI-S M SI-S SI-S-M-NI SI-S plug M

89 IP 67 B

90 IP 67 B 6 Digital In; 6 Digital In / 8 Digital Out 6 Digital In; 6 Digital In / 8 Digital Out Type Qty. SI- M8 N 6DI SI- M N 6DI Type Qty. SI- M8 N 6DI/8DO SI- M N 6DI/8DO Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN Supply voltage -OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter ma. current-carrying capacity per output signal Switching frequency load resistive / inductive / inrush Short-circuit-proof Output voltage, low Output voltage, high Ma. total current of outputs Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded M female 5-pole, -coded 6 M8 socket -pole / 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms Nopen Ma. Mbit/s automatic detection Via rotary coding switch 7 DS file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded 6 M8 socket -pole / 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms 0.5, ma. 00 / ma. / ma. 8 es, cut-off for short circuit and error message 0 V D Supply voltage less 0.7 V D 7, 8 Nopen Ma. Mbit/s automatic detection Via rotary coding switch 7 DS file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus

91 IP 67 nalogue In / nalogue Out / Digital In Type Qty. SI- M N I/O/DI B Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN Supply voltage -OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter ma. current-carrying capacity per output signal Switching frequency load resistive / inductive / inrush Short-circuit-proof Output voltage, low Output voltage, high Ma. total current of outputs Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded M female 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms Nopen Ma. Mbit/s automatic detection Via rotary coding switch 7 DS file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus

92 IP 67 B When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules. Type Qty. 6 Digital In SI- M N 6DI Digital In / 8 Digital Out SI M N 6DI/8DO nalogue In / nalogue Out / Digital In SI- M N I/O/DI Digital In SI- M8 N 6DI Digital In / 8 Digital Out SI- M8 N 6DI/8DO Nopen cables with female plug and male plug Nopen cables with female plug and other side open Nopen cables with male plug and other side open Nopen plug-in connector Nopen terminating resistor SIND N-M 5P -OD Sensor-actuator cables Sensor-actuator plugs Markers Markers Semi-transparent markers for Printet printing SG 8/.5/. SI an be found in our latest catalogue 8, signal and power transmission, order no M8 Dust cap Sensor connections M Dust cap Sensor connections M Dust cap Bus-out and power-out M Dust cap Bus-in and power-in SI-S M SI-S SI-S-M-NI SI-S plug M

93 IP 67 B

94 TM TM IP 67 B 6 Digital In; 6 Digital In / 8 Digital Out 6 Digital In; 6 Digital In / 8 Digital Out Type Qty. SI- M8 DN 6DI SI- M DN 6DI Type Qty. SI- M8 DN 6DI/8DO SI- M DN 6DI/8DO Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN Supply voltage -OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter ma. current-carrying capacity per output signal Switching frequency load resistive / inductive / inrush Short-circuit-proof Output voltage, low Output voltage, high Ma. total current outputs Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded M female 5-pole, -coded 6 M8 socket -pole / 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms DeviceNet Ma. 500 kbit/s automatic detection Via rotary coding switch 0 6 DS file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded 6 M8 socket -pole / 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms 0.5, ma. 00 / ma. / ma. 8 es, cut-off for short circuit and error message 0 V D Supply voltage less 0.7 V D 7 DeviceNet Ma. 500 kbit/s automatic detection Via rotary coding switch 0 6 DS file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus

95 TM TM IP 67 nalogue In / nalogue Out / Digital In Type Qty. SI- M DN I/O/DI B Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN Supply voltage -OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter Measurement range Maimum input voltage in relation to Input resistance load Ma. input current differential Short-circuit-proof esolution / ccuracy Measurement range Output interval Short-circuit-proof esolution / ccuracy Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded M female 5-pole, -coded 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms -0 V... 0 V, 0 V... 0 V, 0 0 m, 0 m 5 V <5 Ohm -50 m to 50 m protected against polarity reversal es -bit / < V... 0 V, 0 V... 0 V, 0 0 m, 0 m 5 ms to 50 ms can be configured es -bit / < 0. DeviceNet Ma. 500 kbit/s automatic detection Via rotary coding switch 0 6 DS file Device-specific for each module 0 mm / 5 mm / mm < 00 g IP Pocan, PBT / V-0, clus

96 IP 67 B When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules. Type Qty. 6 Digital In SI- M DN 6DI Digital In / 8 Digital Out SI- M DN 6DI/8DO nalogue In / nalogue Out / Digital In SI- M DN I/O/DI Digital In SI- M8 DN 6DI Digital In / 8 Digital Out SI- M8 DN 6DI/8DO DeviceNet cables with female plug and male plug DeviceNet cables with female plug and other side open DeviceNet cables with male plug and other side open DeviceNet plug-in connector DeviceNet terminating resistor SIND N-M 5P -OD Sensor-actuator cables Sensor-actuator plugs Markers Markers Semi-transparent markers for Printet printing SG 8/.5/. SI an be found in our latest catalogue 8, signal and power transmission, order no M8 Dust cap Sensor connections M Dust cap Sensor connections M Dust cap Bus-out and power-out M Dust cap Bus-in and power-in SI-S M SI-S SI-S-M-NI SI-S plug M

97 IP 67 B

IP 67 B Professional versions of the Remote I/O System featuring IP 67 protection The modules in the SI ctive Universal Pro systems provide additional I/O and functional modules for more versatile

98 IP 67 B Professional versions of the Remote I/O System featuring IP 67 protection The modules in the SI ctive Universal Pro systems provide additional I/O and functional modules for more versatile topologies. The extension modules come in a compact, space-saving design. They can also be mounted on the side because of the additional drilled holes in the side of the housing. Up to 5 extension modules can be connected over a distance of 50 metres using a shielded, standard M sensor cable and the SI eldbus module. In addition to the digital input and output modules, we also offer counter unit modules, thermal modules, RTD modules and analogue modules. The digital input and output modules are also available in M and M variants. The analogue modules and functional modules are available with M connections. Markers are included with every SI ctive module for labelling the I/O channels and the entire device. These markers can be printed on using the Printet system from Weidmüller.

IP 67 Cost-effective Subbus system Subbus modules are wired up using conventional, shielded, standard M sensor cables. Thus there is no need for expensive custom cables.

Simplied installation The modules have a compact, spacesaving design with additional holes drilled on the side of the housing this allows them to be installed in a quick and versatile manner.

99 IP 67 Cost-effective Subbus system Subbus modules are wired up using conventional, shielded, standard M sensor cables. Thus there is no need for expensive custom cables. The extension modules enable versatile expansion and minimise the costs associated with the eldbus interface. The modules do not, however, detract from the performance of the eldbus system. Simplied installation The modules have a compact, spacesaving design with additional holes drilled on the side of the housing this allows them to be installed in a quick and versatile manner. ll SI ctive modules with digital inputs or digital outputs are optionally available with standard M or M connection systems. The outputs are short-circuitproof and protected against polarity reversal. B Efcient engineering ll Pro-System modules are described in the standardised eldbus specic device description les. They can be integrated into any controller unit and corresponding engineering system regardless of the particular manufacturer. The conguration (whether for the input, DESIN input, or output) is carried out without any additional software. ny user can congure directly from the engineering system.

100 inputs IP 67 B 6 Digital In Type Qty. SI- M PB GW 6DI Type Qty. SI- M8 PB GW 6DI Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN onnection to Subbus SB-OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, B-coded M female 5-pole, B-coded M plug 5-pole, -coded M8 female -pole, -coded 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms, ms, 5 ms, 0 ms, onfigurable POFIBS-DP Ma. Mbit/s automatic detection Via rotary coding switch 6 GSD file 0 mm / 5 mm / mm < 50 g IP Pocan, PBT / V-0, clus M plug 5-pole, B-coded M female 5-pole, B-coded M plug 5-pole, -coded M8 female -pole, -coded 6 M8 female -pole V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms, ms, 5 ms, 0 ms, onfigurable POFIBS-DP Ma. Mbit/s automatic detection Via rotary coding switch 6 GSD file 0 mm / 5 mm / mm < 50 g IP Pocan, PBT / V-0, clus

IP 67 When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules.

POFIBS Gateway M SI- M PB GW 6DI 98550000 POFIBS Gateway M8 SI- M8 PB GW 6DI 00000 Subbus module SI- M SB 8DI 9860000 Subbus module SI- M SB 8DI/8DO 9860000 Subbus module SI- M8 SB 8DI 98600000

M SB hler 9870000 Subbus module SI- M8 SB 8DO 98660000 Subbus module SI- M SB 8DO 98680000 POFIBS cables with female plug and male plug POFIBS cables with female plug and other side open POFIBS

101 IP 67 When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules. Type Qty. POFIBS Gateway M SI- M PB GW 6DI POFIBS Gateway M8 SI- M8 PB GW 6DI Subbus module SI- M SB 8DI Subbus module SI- M SB 8DI/8DO Subbus module SI- M8 SB 8DI Subbus module SI- M8 SB 8DI/8DO Subbus module SI- M SB I Subbus module SI- M SB O Subbus module SI- M SB PT Subbus module SI- M SB Thermo Subbus module SI- M SB hler Subbus module SI- M8 SB 8DO Subbus module SI- M SB 8DO POFIBS cables with female plug and male plug POFIBS cables with female plug and other side open POFIBS cables with male plug and other side open B POFIBS plug-in connector POFIBS terminating resistor SIND PB M P B-OD Subbus cables Subbus terminating resistor SIND N M8 P Sensor-actuator cables Sensor-actuator plugs Markers Markers Semi-transparent markers for Printet printing SG 8/.5/. SI an be found in our latest catalogue 8, signal and power transmission, order no M8 Dust cap Sensor connections M Dust cap Sensor connections M Dust cap Bus-out and power-out M Dust cap Bus-in and power-in SI-S M SI-S SI-S-M-NI SI-S plug M

102 inputs IP 67 B 6 Digital In Type Qty. SI- M DN GW 6DI Fieldbus BS-IN Fieldbus BS-OT Supply voltage -IN onnection to Subbus SB-OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter Bus system Transmission rate ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, -coded M female 5-pole, -coded M plug 5-pole, -coded M8 female -pole, -coded 8 M socket 5-pole, -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms, ms, 5 ms, 0 ms, onfigurable DeviceNet TM Ma. 500 kbit/s automatic detection Via rotary coding switch 0 6 DS file 0 mm / 5 mm / mm < 50 g IP Pocan, PBT / V-0, clus

DeviceNet Gateway SI- M DN GW 6DI 98570000 Subbus module SI- M SB 8DI 9860000 Subbus module SI- M SB 8DI/8DO 9860000 Subbus module SI- M8 SB 8DI 98600000 Subbus module SI- M8 SB 8DI/8DO 9860000

SB 8DO 98660000 Subbus module SI- M SB 8DO 98680000 DeviceNet cables with female plug and male plug DeviceNet cables with female plug and other side open DeviceNet cables with male plug and other

103 IP 67 When planning the automation of a facility, you must have a wide variety of components available. These engineering tables list all the components required for wiring up the SI ctive modules. Type Qty. DeviceNet Gateway SI- M DN GW 6DI Subbus module SI- M SB 8DI Subbus module SI- M SB 8DI/8DO Subbus module SI- M8 SB 8DI Subbus module SI- M8 SB 8DI/8DO Subbus module SI- M SB I Subbus module SI- M SB O Subbus module SI- M SB PT Subbus module SI- M SB Thermo Subbus module SI- M SB hler Subbus module SI- M8 SB 8DO Subbus module SI- M SB 8DO DeviceNet cables with female plug and male plug DeviceNet cables with female plug and other side open DeviceNet cables with male plug and other side open B DeviceNet plug-in connector DeviceNet terminating resistor SIND N-M 5P -OD Subbus cables Subbus terminating resistor SIND N M8 P Sensor-actuator cables Sensor-actuator plugs Markers Markers Semi-transparent markers for Printet printing SG 8/.5/. SI an be found in our latest catalogue 8, signal and power transmission, order no M8 Dust cap Sensor connections M Dust cap Sensor connections M Dust cap Bus-out and power-out M Dust cap Bus-in and power-in SI-S M SI-S SI-S-M-NI SI-S plug M

104 IP 67 B 8 Digital In; 8 Digital In / 8 Digital Out 8 Digital In; 8 Digital In / 8 Digital Out 8 Digital Out 8 Digital Out Type Qty. SI- M8 SB 8DI SI- M SB 8DI Type Qty. SI- M8 SB 8DIO SI- M SB 8DIO SI- M8 SB 8DO SI- M SB 8DO Supply voltage -IN onnection to Subbus SB-IN onnection to Subbus SB-OT I/O connections Operating voltage ontact load Ma. total current module Permitted input voltage Input current, low Input current, high Input current, low Input current, high Input filter Separation of potentials to module electronics ma. current-carrying capacity per output signal Separation of potentials to module electronics Switching frequency, resistive load Switching frequency, inductive load Switching frequency, lamp load Short-circuit-proof Output voltage, low Output voltage, high Ma. total current outputs Bus system ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D -0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms, ms, 5 ms, 0 ms, onfigurable none Subbus automatic automatic 55 mm / 0 mm / mm < 00 g IP Pocan, PBT / 5V, clus M plug 5-pole, -coded M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D Per PIN ma. 8-0 V to 0 V protected against polarity reversal < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type < 5 m in accordance with N 6- Type m to 5 m in accordance with N 6- Type ms, ms, 5 ms, 0 ms, onfigurable none none ma. 00 ma. ma. 8 es, cut-off for short circuit and error message 0 V D Supply voltage less 0.7 V D Subbus automatic automatic 80 mm / 0 mm / mm < 00 g IP Pocan, PBT / 5V, clus

105 IP 67 nalogue Out / nalogue In Type Qty. SI- M SB O Type Qty. SI- M SB I B onnection to Subbus SB-IN onnection to Subbus SB-OT I/O connections Operating voltage Measurement range Maimum input voltage in relation to Input resistance load Ma. input current differential Short-circuit-proof esolution / ccuracy Measurement range Output interval Short-circuit-proof esolution / ccuracy Bus system ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D -0 V... 0 V, 0 V... 0 V, 0 0 m, 0 m 5 ms to 50 ms can be configured es -bit / < 0. Subbus automatic automatic 55 mm / 0 mm / mm < 00 g IP Pocan, PBT / 5V, clus M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D -0 V... 0 V, 0 V... 0 V, 0 0 m, 0 m 5 V <5 Ohm -50 m to 50 m protected against polarity reversal es -bit / < 0. Subbus automatic automatic 55 mm / 0 mm / mm < 00 g IP Pocan, PBT / 5V, clus

106 IP 67 B counter inputs / gate outputs Type Qty. SI- M SB ounter Supply voltage -IN onnection to Subbus SB-IN onnection to Subbus SB-OT I/O connections Operating voltage ontact load Ma. total current module Functional inputs ounting breadth Switching frequency Number of inputs Bus system ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M plug 5-pole, -coded M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D Per PIN ma. 8 Bit 00 k enables, counters, count directions Subbus automatic automatic 80 mm / 0 mm / mm < 00 g IP Pocan, PBT / 5V, clus

107 IP 67 thermal inputs Type Qty. SI- M SB Thermo B onnection to Subbus SB-IN onnection to Subbus SB-OT I/O connections Operating voltage Functional inputs Sensor Temperature range esolution onversion time Measurement error Input filter cold junction compensation Bus system ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D Types,, L, B,, N,, S, T, mv readings Typical for sensor, Preset Type, -00 to,70 0. per digit 50 ms can be configured to 70 ms < 0.5 of measuring range limit onfigurable ternal PT000 connection on pins and Subbus automatic automatic 55 mm / 0 mm mm < 00 g IP Pocan, PBT / 5V, clus

108 IP 67 B PT00 inputs Type Qty. SI- M SB PT onnection to Subbus SB-IN onnection to Subbus SB-OT I/O connections Operating voltage Functional inputs Sensor esolution onversion time Measurement error Input filter Measurement range for PT sensors Measurement range for Ni sensors esistance measurement Potentiometer Measurement current Bus system ddressing System integration L W arth Protection degree Operating temperature Storage temperature ousing main material / L 9 flammability rating ertificate M8 plug -pole, -coded M8 female -pole, -coded M female, 5-pole -coded V 8 V D... 0 V D N00, N000, N0, PT00, PT000, PT00, PT00, PT500, Potentiometer connection, esistance measurement 0. per digit 50 ms can be configured to 65 ms < onfigurable ma. 000 Ohm 00 to 000 three-wire connection Typically 0.5 m Subbus automatic automatic 55 mm / 0 mm / mm < 00 g IP Pocan, PBT / 5V, clus

109 IP 67 B

IP 67 B Weidmüller is also offering the required sensor and actuator cables as a supplement to the new, innovative u-remote system. enerally, there are two different courses of action for cabling.

110 IP 67 B Weidmüller is also offering the required sensor and actuator cables as a supplement to the new, innovative u-remote system. enerally, there are two different courses of action for cabling. Circular plug cables assembled on one end Cables assembled on both ends with u-remote plug-in connectors already connected To make things easier to understand, only the M and M cables have been shown in this diagram. ctuator cables can also be found in catalogue. The PUR cable used here is black, halogen-free and suitable for dragline cable carriers. The PC cable is suitable for dragline cable carriers Further technical details are available in catalogue. The minimum order quantity for each type of cable is unit. This means that sample parts and the demand for replacement parts are also easy to manage. Standard cable lengths The cable lengths listed under order data are all.5 m. To order any other standard cable lengths, simply change the last four numbers in the order number. dditional lengths can be supplied at the request of the customer. Type.5 m xxxxxx050.0 m xxxxxx m xxxxxx m xxxxxx000 Description code example L = metal nut M M8 G = straight W = angled number of poles a coded 5 C = closer O = opener SIL-URP M8 W- L.5 U URP = u-remote connector PUSH IN URZ = u-remote twin connector female cable V = PVC-PVC U = PUR halogen free UGE = PUR halogen free, yellow T = welding spark resistant cable length,5 m,0 m 5,0 m 0,0 m X m L = LED

u-remote plug / M u-remote plug / M8 IP 67 ated current ated voltage in accordance with VD standard 00 ISO group Temperature range of housing ore cross-section Type of protection ontact surface

111 u-remote plug / M u-remote plug / M8 IP 67 ated current ated voltage in accordance with VD standard 00 ISO group Temperature range of housing ore cross-section Type of protection ontact surface Sheath material Wire core insulation M 50 V / M8 60 V -pole / LD V 5 to 85 M 0. mm/ M8 0.5 mm IP 67/68 M/M8 head Gold-plated P TPM M 50 V / M8 60 V -polig / LD V 5 to 85 M 0. mm/ M8 0.5 mm IP 67/68 M/M8 head Gold-plated PV PV B NO contact / u-remote plug - M straight socket NO contact / u-remote plug - M angled socket N contact / u-remote plug - M straight socket N contact / u-remote plug - M angled socket -pin / u-remote plug - M straight socket -pin / u-remote plug - M angled socket -pin / u-remote plug - M8 straight socket -pin / u-remote plug - M8 angled socket Type Qty. SIL-PMG SIL-PMW SIL-PMG-O SIL-PMW-O SIL-PMG SIL-PMW SIL-PM8G SIL-PM8W Type Qty. SIL-PMG--.5V SIL-PMW--.5V SIL-PMG-O-.5V SIL-PMW-O-.5V SIL-PMG--.5V SIL-PMW--.5V SIL-PM8G--.5V SIL-PM8W--.5V pin / u-remote plug - M angled socket - LD -pin / u-remote plug - M8 angled socket - LD SIL-PMW-L SIL-PM8W-L SIL-PMW-L-.5V SIL-PM8W-L-.5V Twin / NO contact / u-remote plug - M straight socket Twin / NO contact / u-remote plug - M angled socket Twin / -pin / u-remote plug - M8 straight socket Twin / -pin / u-remote plug - M8 angled socket SIL-MG SIL-MW SIL-M8G SIL-M8W ccessories M8/M cable gland tool torque Type Qty. Screwty -Set-DM Type Qty. Screwty -Set-DM pin + + CBLE OUTLET CBLE OUTLET

112 -pin -pin IP 67 B + + ated current ated voltage in accordance with VD standard 00 ISO group Temperature range of housing ore cross-section Type of protection ontact surface Sheath material Wire core insulation 50 V 5 to mm IP 67/68 Gold-plated P P 50 V 5 to mm IP 67/68 Gold-plated PV PV PV M straight socket alogen-free P M straight socket ellow halogen-free P M straight socket alogen-free P M straight socket, resistant to welding beads PV M angled socket alogen-free P M angled socket ellow halogen-free P M angled socket alogen-free P M angled socket, resistant to welding beads Type Qty. SIL-MBG--.5V SIL-MBG SIL-MBG--.5G SIL-MBG--.5T SIL-MBW--.5V SIL-MBW SIL-MBW--.5G SIL-MBW--.5T Type Qty. SIL-MBG--.5V SIL-MBG SIL-MBG--.5G SIL-MBG--.5T SIL-MBW--.5V SIL-MBW SIL-MBW--.5G SIL-MBW--.5T ccessories M8/M cable gland tool torque Type Qty. Screwty -Set-DM Type Qty. Screwty -Set-DM

113 -pin -pin IP B ated current ated voltage in accordance with VD standard 00 ISO group Temperature range of housing ore cross-section Type of protection ontact surface Sheath material Wire core insulation 60 V 5 to mm IP 67/68 Gold-plated P P 0 V 5 to mm IP 67/68 Gold-plated PV PV PV M8 straight socket alogen-free P M8 straight socket ellow halogen-free P M8 straight socket Type Qty. SIL-M8BG--.5V SIL-M8BG SIL-M8BG--.5G Type Qty. SIL-M8BG--.5V SIL-M8BG SIL-M8BG--.5G PV M8 angled socket alogen-free P M8 angled socket ellow halogen-free P M8 angled socket SIL-M8BW--.5V SIL-M8BW SIL-M8BW--.5G SIL-M8BW--.5V SIL-M8BW SIL-M8BW--.5G ccessories M8/M cable gland tool torque Type Qty. Screwty -Set-DM Type Qty. Screwty -Set-DM

114 IP 67 B yellow green + yellow green + ated current ated voltage in accordance with VD standard 00 ISO group Temperature range of housing ore cross-section Type of protection ontact surface Sheath material Wire core insulation V 5 to 85 M 0. mm/ M8 0.5 mm IP 67/68 Gold-plated P P V 5 to 85 M 0. mm/ M8 0.5 mm IP 67/68 Gold-plated P P PV M angled socket alogen-free P M angled socket ellow halogen-free P M angled socket alogen-free P M angled socket, resistant to welding beads PV M8 angled socket alogen-free P M8 angled socket ellow halogen-free P M8 angled socket Type Qty. SIL-MBW-L.5V SIL-MBW-L SIL-MBW-L.5G SIL-MBW-L.5T SIL-M8BW-L.5V SIL-M8BW-L SIL-M8BW-L.5G Type Qty. SIL-MBW--L.5V SIL-MBW--L SIL-MBW--L.5G SIL-MBW--L.5T SIL-M8BW-L.5V SIL-M8BW-L SIL-M8BW-L.5G ccessories M8/M cable gland tool torque Type Qty. Screwty -Set-DM Type Qty. Screwty -Set-DM

115 7 L 8 8 L Ø.6 Mx Mx Ø.6 7. L 8 8 L 9.7 IP 67 B Ø 9.9 M8x M8x Ø 9.9 Screwty ontents interchangeable bit torque handle adjustment aid for Screwty torque M Nm / M Nm Screwty M, M8, M F, M8 F attachment Type Qty. Screwty -Set-DM

This data sheet is only valid in association with the IL SYS INST UM E user manual.

This data sheet is only valid in association with the IL SYS INST UM E user manual. Inline counter terminal, version for extreme conditions, 1 counter input, 1 control input, 1 output, 24 V DC, 500 ma Data sheet 106148_en_03 PHOENIX CONTACT 2015-11-04 1 Description The terminal is designed