Phone: Fax: Web: -

Size: px
Start display at page:

Download "Phone: Fax: Web: -"

Transcription

1 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to IP67, as well as the wide temperature range of -40 C up to +85 C, make this product range the perfect encoder for all applications. Incremental encoders / RoHS C IP Safety-ock TM High rotational speed Temperature range High protection level High shaft load capacity Shock / vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor Surface protection salt spray-tested optional Robust performance Increased resistance against vibrations and tolerance of installation errors, elimination of machine downtime and repairs thanks to sturdy bearing construction in Safety-ock TM esign. Ensures highest safety against field breakdowns and is thus suitable also for outside use thanks to its resistant die-cast housing and protection up to IP67. Undetachable clamping ring on hollow shaft encoders. Wide temperature range, -40 C C. NEW: Higher shock resistance. Higher vibration resistance. IP66 and IP67 protection level in one version. Many variants Suitable connection variant for every specific case: cable connection, M, M3, MI and Sub- connector. Reliable mounting in a wide variety of installation situations: comprehensive and proven fixing possibilities. Compatible with all US and European standards. Max pulses per revolution. NEW: ouble number of standard pulse numbers. Variants with connector fitted in the cable for error-free electrical connection to your control. Additional connector variants (M / 5-pin, Sub-). Additional standard cable lengths. Technology in detail Robust Safety-ock bearing structure Cables with fitted connector Undetachable clamping ring Tangential cable outlet Slotted clamping ring + slotted shaft Phone: Fax: Web: info@clrwtr.com

2 Order code Shaft version Type. X X X X. XXXX a b c d e. P XX X X f g h a Flange 5 = synchro flange, IP66/IP67 ø 50.8 mm [ ] 6 = synchro flange, IP65 ø 50.8 mm [ ] 7 = clamping flange, IP66/IP67 ø 58 mm [.8 ] 8 = clamping flange, IP65 ø 58 mm [.8 ] A = synchro flange, IP66/IP67 ø 58 mm [.8 ] B = synchro flange, IP65 ø 58 mm [.8 ] C = square flange, IP66/IP mm [.5 ] = square flange, IP mm [.5 ] G = Euroflansch, IP66/IP67 ø 5 mm [4.53 ] ) = servo flange, IP66/IP67 ø 50.8 mm [ ] = servo flange, IP65 ø 50.8 mm [ ] 3 = square flange, IP66/IP mm [.06 ] 4 = square flange, IP mm [.06 ] E = servo flange, IP66/IP67 ø 63.5 mm [.5 ] F = servo flange, IP65 ø 63.5 mm [.5 ] b Shaft (ø x ), with flat = ø 6 x 0 mm [0.4 x 0.39 ] = ø /4 x 5/8 (6.35 x mm) 6 = ø 8 x 5 mm [0.3 x 0.59 ] 3 = ø 0 x 0 mm [0.39 x 0.79 ] 4 = ø 3/8 x 5/8 (9.5 x mm) B = ø x 33 mm [0.43 x.30 ], with feather key shaft slot ) 5 = ø x 0 mm [0.47 x 0.79 ] 7 = ø /4 x 7/8 8 = ø 3/8 x 7/8 c Output circuit / power supply 4 = RS4 (with inverted signal) / 5 V C = RS4 (with inverted signal) / V C = Push-Pull (77 compatible with inverted signal) / V C 5 = Push-Pull (with inverted signal) / V C 7 = Push-Pull (without inverted signal) / V C 3) 3 = Open collector (with inverted signal) / V C 8 = Push-Pull (77 with inverted signal), without capacitor / V C 4) d Type of connection cable = axial cable, m [3.8 ] PVC A = axial cable, special length PVC *) = radial cable, m [3.8 ] PVC B = radial cable, special length PVC *) Type of connection connector P = axial M connector, 5-pin 5) R = radial M connector, 5-pin 5) 3 = axial M connector, 8-pin 4 = radial M connector, 8-pin 7 = axial M3 connector, -pin 8 = radial M3 connector, -pin Y = radial MI connector, 0-pin W = radial MI connector, 7-pin 9 = radial MI connector, 6-pin Type of connection connector with cable = radial cable with M connector, 8-pin, special length PVC *) M = radial cable with M3 connector, -pin, special length PVC *) N = radial cable with Sub- connector, 9-pin, special length PVC *) *) Available special lengths (connection types A, B,, M, N: 0.3, 0.5,,, 3, 4, 5, 6, 8, 0,, 5, 0 m [0.98,.64, 3.8, 6.56, 9.84, 3., 6.40, 9,69, 6.5, 3.80, 39.37, 49., 65,6 ] order code expansion.xxxx = length in dm ex.: A (for cable length 3 m) e Pulse rate,, 4, 5, 0,, 4, 0, 5, 8, 30, 3, 36, 50, 60, 64, 80, 00, 0, 5, 50, 80, 00, 40, 50, 56, 300, 34, 360, 375, 400, 500, 5, 600, 65, 70, 800, 900, 000, 04, 00, 50, 500, 800, 000, 048, 500, 3000, 3600, 4000, 4096, 5000 (e.g. 00 pulses => 000) f Special output signal formats 00 = standard output other = see page 8 g Capacitor 0 = standard A = no bypass capacitor (vector motor) (only valide with output circuits, 3, 4, 5) h Special connector pin configuration 0 = standard wiring other = see page 6 Optional on request - other pulse rates - Ex / 6) - surface protection salt spray ) Only in conjunction with shaft type B. ) Only in conjunction with flange type G. 3) Only in conjunction with type of connection P or R. 4) Attention: no CE types! 5) Only in conjunction with output circuit 7. 6) For the cable connection type, cable material PUR. Phone: Fax: Web: info@clrwtr.com

3 Order code Hollow shaft X X X X. XXXX Type a b c d e. P XX X X f g h a Flange = with spring element, long, IP66/IP67 = with spring element, long, IP65 3 = with fastening arm, long, IP66/IP67 4 = with fastening arm, long, IP65 7 = with stator coupling, IP66/IP67 ø 65 mm [.56 ] 8 = with stator coupling, IP65 ø 65 mm [.56 ] C = with stator coupling, IP66/IP67 ø 63 mm [.48 ] = with stator coupling, IP65 ø 63 mm [.48 ] 5 = with stator coupling, IP66/IP67 ø 57. mm [.5 ] 6 = with stator coupling, IP65 ø 57. mm [.5 ] d Type of connection cable = radial cable, m [3.8 ] PVC A = radial cable, special length PVC *) E = tangential cable, m [3.8 ] PVC F = tangential cable, special length PVC *) Type of connection connector R = radial M connector, 5-pin 3) = radial M connector, 8-pin 4 = radial M3 connector, -pin 6 = radial MI connector, 7-pin 7 = radial MI connector, 0-pin Incremental encoders b Hollow shaft = ø 6 mm [0.4 ] = ø /4 9 = ø 8 mm [0.3 ] 4 = ø 3/8 3 = ø 0 mm [0.39 ] 5 = ø mm [0.47 ] 6 = ø / A = ø 4 mm [0.55 ] 8 = ø 5 mm [0.59 ] 7 = ø 5/8 c Output circuit / power supply 4 = RS4 (with inverted signal) / 5 V C = RS4 (with inverted signal) / V C = Push-Pull (77 compatible with inverted signal) / V C 5 = Push-Pull (with inverted signal) / V C 7 = Push-Pull (without inverted signal) / V C ) 3 = Open collector (with inverted signal) / V C 8 = Push-Pull (77 with inverted signal), without capacitor / V C ) Type of connection connector with cable H = tangential cable, 0.3 m [0.98 ] PVC, incl. M connector, 8-pin for central fastening = tangential cable with M connector, 8-pin, special length PVC *) M = tangential cable with M3 connector, -pin, special length PVC *) N = tangential cable with Sub- connector, 9-pin, special length PVC *) *) Available special lengths (connection types A, F,, M, N): 0.3, 0.5,,, 3, 4, 5, 6, 8, 0,, 5, 0 m [0.98,.64, 3.8, 6.56, 9.84, 3., 6.40, 9,69, 6.5, 3.80, 39.37, 49., 65,6 ] order code expansion.xxxx = length in dm ex.: A (for cable length 3 m) e Pulse rate,, 4, 5, 0,, 4, 0, 5, 8, 30, 3, 36, 50, 60, 64, 80, 00, 0, 5, 50, 80, 00, 40, 50, 56, 300, 34, 360, 375, 400, 500, 5, 600, 65, 70, 800, 900, 000, 04, 00, 50, 500, 800, 000, 048, 500, 3000, 3600, 4000, 4096, 5000 (e.g. 00 pulses => 000) f Special output signal formats 00 = standard output other = see page 8 g Capacitor 0 = standard A = no bypass capacitor (vector motor) (only valide with output circuits, 3, 4, 5) h Special connector pin configuration 0 = standard wiring other = see page 6 Optional on request - other pulse rates - Ex / (not for type of connection E, F, H,, M, N) 4) - surface protection salt spray tested ) Attention: no CE types! ) Only in conjunction with type of connection R. 3) Only in conjunction with output circuit 7. 4) For the cable connection type, cable material PUR. Phone: Fax: Web: info@clrwtr.com

4 Mounting accessory for shaft encoders Order no. Coupling bellows coupling ø 9 mm [0.75 ] for shaft 6 mm [0.4 ] bellows coupling ø 9 mm [0.75 ] for shaft 0 mm [0.39 ] Mounting accessory for hollow shaft encoders Order no. 8 0,3 Cylindrical pin, long with fixing thread , SW7 [0,8] for torque stops 0,6 0,6 4 m8 M4 30,8 R 7 0,8 Isolation / adapter inserts for hollow shaft encoders order code X8XX.XXXX Isolation insert Thermal and electrical isolation of the encoders (Temperature range C [-40 F F] ) Isolation inserts prevent currents from passing through the encoder bearings. These currents can occur when using inverter controlled three-phase or AC vector motors and considerably shorten the service life of the encoder bearings. In addition the encoder is thermally isolated as the plastic does not transfer the heat to the encoder. 6 mm [0.4 ] mm [0.3 ] mm [0.39 ] mm [0.47 ] / / / Further accessories can be found in the accessories section or in the accessories area of our website. Connection technology Order no. Connector, self-assembly (straight) M female connector with coupling nut 05.CMB 88-0 M3 female connector with coupling nut MI female connector with coupling nut, 0-pin Cordset, pre-assembled M female connector with coupling nut, m [6.56 ] PVC cable M M3 female connector with coupling nut, m [6.56 ] PVC cabl Additional connectors can be found in the connection technology section or in the connection technology area of our website. Phone: Fax: Web: info@clrwtr.com

5 Technical data Mechanical characteristics Maximum speed IP min min - (continuous) IP66/IP min min - (continuous) Mass moment of inertia shaft version approx..8 x 0-6 kgm hollow shaft version approx. 6 x 0-6 kgm Starting torque IP65 < 0.0 Nm at 0 C [68 F] IP66/IP67 < 0.05 Nm Shaft load capacity radial 00 N axial 50 N Weight approx. 0.4 kg [4. oz] Protection acc. to EN 6059 without shaft seal IP65 with shaft seal IP66/IP67 Working temperature range -40 C ) C [-40 F ) F] Material shaft stainless steel Shock resistance acc. to EN m/s, 6 ms ) Vibration resistance acc. to EN m/s, Hz 3) Incremental encoders Electrical characteristics Output circuit RS4 RS4 Push-Pull Push-Pull Push-Pull Open collector (TT compatible) (TT compatible) (77 compatible) (77, without capacitor) (773) Order code 4 5, Power supply V C 5 V C (±5 %) V C V C V C V C Power consumption (no load) typ. 40 ma typ. 40 ma typ. 50 ma typ. 50 ma typ. 50 ma 00 ma max. 90 ma max. 90 ma max. 00 ma max. 00 ma max. 00 ma Permissible load / channel max. +/- 0 ma max. +/- 0 ma max. +/- 0 ma max. +/- 0 ma max. +/- 0 ma +/- 0 ma sink at 30 V C Pulse frequency max. 300 khz max. 300 khz max. 300 khz max. 300 khz 4) max. 300 khz max. 300 khz Signal level HIGH min..5 V min..5 V min +V -.0 V min. +V -.0 V min. +V -.0 V OW max. 0.5 V max. 0.5 V max. 0.5 V max. 0.5 V max. 0.5 V Rising edge time t r max. 00 ns max. 00 ns max. μs max. μs max. μs Falling edge time t f max. 00 ns max. 00 ns max. μs max. μs max. μs Short circuit proof outputs 5) yes 6) yes 6) yes yes yes 6) yes Reverse polarity protection yes no yes no no no of the power supply U approval file 468 CE compliant acc. to EMC guideline 04/30/EC RoHS guideline 0/65/EU ) With connector: -40 C [-40 F], cable fixed: -30 C [- F], cable moved: -0 C [-4 F]. ) For MI connectors: 500 m/ s 3) For MI connectors: 00 m/ s 4) Max. recommended cable length 30 m [98.43 ]. 5) If power supply correctly applied. 6) Only one channel allowed to be shorted-out: at +V= 5 V C, short-circuit to channel, 0 V, or +V is permitted. at +V= V C, short-circuit to channel or 0 V is permitted. Phone: Fax: Web: info@clrwtr.com

6 Terminal assignment wiring Output circuit Type of connection Cable (isolate unused wires individually before initial start-up),, 3, 4, 5, :,, A, B Signal: 0 V +V 0 Vsens +Vsens A B 0 H 500:, A, E, F Cable colour: WH BN GY PK R BU GN YE GY PK BU R shield Output circuit Type of connection M connector, 5-pin,, 3, 4, 7, : P, R Signal: 0 V +V A B 0 H 500: R Pin: PH ) Output circuit Type of connection M connector, 8-pin,, 3, 4, 5, : 3, 4, Signal: 0 V +V A B 0 H 500:, H ), Pin: PH ) Output circuit Type of connection M3 connector, -pin,, 3, 4, 5, : 7, 8, M Signal: 0 V +V 0 Vsens +Vsens A B 0 H 500: 4, M Pin: PH ) Output circuit Type of connection MI connector, 0-pin,, 3, 4, 5, : Y Signal: 0 V +V +Vsens A B 0 H 500: 7 Pin: F E A G B H C I J Output circuit Type of connection MI connector, 7-pin, 3, 4, 7, : W Signal: 0 V +V +Vsens A B 0 H 500: 6 Pin: F E A B C G Output circuit Type of connection MI connector, 6-pin, 3, 4, 7, : 9 Signal: 0 V +V A B 0 H Pin: A B E C Output circuit Type of connection Sub- connector, 9-pin,, 3, 4, 5, : N Signal: 0 V +V A B 0 H 500: N Pin: PH ) Terminal assignment Special connector pin configuration Order code h Output circuit Type of connection M connector, 8-pin 5000: 3, 4, Signal: 0 V +V A B 0 H 7,, 3, 4, 5, 8 500:, H ), Pin: PH ) Order code h Output circuit Type of connection MI connector, 6-pin 5000: 9 Signal: 0 V +V A B 0 H, 3, 4, 7, 8 Pin: A, F B E C Order code h Output circuit Type of connection MI connector, 7-pin 5000: W Signal: 0 V +V A B H 4, 3, 4, 7, 8 500: 6 Pin: F A C B E G Order code h Output circuit Type of connection MI connector, 0-pin 5000: Y Signal: 0 V +V A B 0 H 6,, 3, 4, 5, 8 500: 7 Pin: F A H B I C J G +V: Encoder power supply +V C 0 V: Encoder power supply ground GN (0 V) 0 Vsens / +Vsens: Using the sensor outputs of the encoder, the voltage present can be measured and if necessary increased accordingly. A, : Incremental output channel A B, : Incremental output channel B 0, : Reference signal PH H: Plug connector housing (shield) ) PH = shield is attached to connector housing. ) With type of connection H shield is not attached to connector housing. Phone: Fax: Web: info@clrwtr.com

7 Top view of mating side, male contact base M connector, 5-pin M connector, 8-pin M3 connector, -pin Incremental encoders H G I J F E A B C F A G B E C F E A B C () () (3) (4) (5) (6) (7) (8) (9) MI connector, 0-pin MI connector, 7-pin MI connector, 6-pin Sub- connector, 9-pin Phone: Fax: Web: info@clrwtr.com

8 Special output signal formats All Kübler encoders come standard with six channels where A leads B in the clockwise direction and the standard index is gated with A & B. The tolerance of the wave form affects the control and, in some cases, may affect the smoothness of system operation. Wave form tolerances t r = rise time t f = fall time A leads B when the shaft is rotated in the clockwise direction viewing the shaft or collet end. This is the Kübler standard. This format applies to the pin key codes listed below. Order code f B leads A when the shaft is rotated in the clockwise direction viewing the shaft or collet end. This format applies to the pin key codes listed below. Order code f Z gated with A & B. This is the Kübler standard. Z is 90 wide. 04 Z gated with A & B. Z is 90 wide. 0 Z gated with B. Z is 80 wide. 05 Z gated with B. Z is 80 wide. 0 Z gated with A. Z is 80 wide. 06 Z gated with A. Z is 80 wide. 03 Z ungated. Z is 330 to 360 wide. 07 Z ungated. Z is 330 to 360 wide. 08 Z is 80 wide 09 Z gated with. Z is 60 wide. Z is a minimum with of 70 (electrical degrees). 0 Z is a negative marker gated with B. Z is 80 wide. 3 Z gated with. Z is 60 wide. Z has a minimum width of 70. Phone: Fax: Web: info@clrwtr.com

9 imensions shaft version imensions in mm [inch] Synchro flange, ø 50.8 [] Flange type 5 and 6 M3, 6 [0.4] deep 46,7,84 30,45, 35,,39 50,8 47,85 30 h7,8 3 0,,6 57,4,8 7,4 3x0,8 7,4 90,4 3,56 Incremental encoders = ø 6 h7 [0.4] ø 8 h7 [0.3] ø 0 f7 [0.39] ø h7 [0.47] ø /4 h7 ( = 5/8 ) ø 3/8 h7 ( = 5/8 ) ø /4 h8 ( = 7/8 ) ø 3/8 h8 ( = 7/8 ) 3 0, 3,3 0,3 43,7,7 47,85 64,5 40,57 53,,09 MI-connector version Clamping flange, ø 58 [.8] Flange type 7 and 8 M3, 6 [0.4] deep 3,8 3,8 0,94 0,94 3,8 0,94 38,5 38,5,5,5 38,5,5 33,75,33 38,5,5 58,8 50 h7 [,97] max.50 4,65 75, ,7,97 58,8,97,97,97 = ø 6 h7 [0.4] ø 8 h7 [0.3] ø 0 f7 [0.39] ø h7 [0.47] ø /4 h7 ( = 5/8 ) ø 3/8 h7 ( = 5/8 ) ø /4 h8 ( = 7/8 ) ø 3/8 h8 ( = 7/8 ) 36 58,8 f8 [,4] 36 f8 [,4] 58,8 36 f8 [,4] ,39 0 0,39 37,46 37,46 0,83 0,83 0 0,39 37,46 0, x0 3x0 3x0 48,89 48,89 48,89 0 0,39 0 0,39 0 0,39 46,5 46,5,83,83 46,5,83 MI-connector version ,7 3,7,95 94,95 3,7, Synchro flange, ø 58 [.8] Flange type A and B M4, 6 [0.4] deep 3x0 = ø 6 h7 [0.4] ø 8 h7 [0.3] ø 0 f7 [0.39] ø h7 [0.47] ø /4 h7 ( = 5/8 ) ø 3/8 h7 ( = 5/8 ) ø /4 h8 ( = 7/8 ) ø 3/8 h8 ( = 7/8 ) 3 0, 3 0, 4 0,6 47,85 max. 0,83 56,5, MI-connector version Phone: Fax: Web: info@clrwtr.com

10 imensions shaft version imensions in mm [inch] Square flange, 63.5 [.5] Flange type C and 6,5 6,5,03,03 3, 3, 5,5 0, 5,5 0, 63,5,5 [,5] [,5] 50,8 63,5,5 3,75 h7 50,8 3,75 h7 6,6,43 6 0,4 36,4 5 4,53 00 ±0, [3,94] 3, 33,3 85 h5 50,8 58,8,97,97 max.50 k6 4 max.50 0,6,06 5,4,06 5,4 3,06 77,75 3,06 3,8 77,75 96,75 3,8 96,75 7,5 0,3 7,5 0,3 0,83 0,83 7, 0,8 7, 0,8 39,5,56 39,5,56 7,5 0,3 7,5 0,3 49,93 49,93 MI-connector version Euro flange, ø 5 [4.53] Flange type G Feather key attached 0,6 6,6 0 0,39 [0,43] [3,35] 7 0,8 6 0,63 6x60 6,6 0,6 3 0, 54,6,5 8 0,3 3,5 0,5 Phone: Fax: Web: info@clrwtr.com

11 imensions shaft version imensions in mm [inch] Servo flange, ø 50.8 [] Flange type and 35,,39 35, 35,,39, UNC x 5 [0.] deep 4-40 UNC x 6 [0.4] deep 3,5 3,5 0,5 0,5 50,8 50,8 47,85 47,85 3,75 h7 [,5] 3,75 h7 [,5] 46,8 46,8 4x90 4x x0 3x0,84 7,5 9,5 3,59 7,5,84 7,5,84 9,5 3,59 9,5 Incremental 3,59 encoders = ø 6 h7 [0.4] ø 8 h7 [0.3] ø 0 f7 [0.39] ø h7 [0.47] ø /4 h7 ( = 5/8 ) ø 3/8 h7 ( = 5/8 ) ø /4 h8 ( = 7/8 ) ø 3/8 h8 ( = 7/8 ) 3,3 3,3 0,3 0,3,54,54 0, 0,,54,54 0, 0, 43,7 43,7,7,7 60,7 60,7,39,39 38, 38,,5,5 4,3 4,3,63,63 3,3 0,3,33,3 0,3 0,3 53,,09 53, 53,,09,09 MI-connector version Square flange, 5.3 [.06] Flange type 3 and 4 35,,39 35,,3935,,39 ø 4 [0.6] 3,5 0,5 3,5 0,53,5 0,5 6-3 UNC x 5 [0.] deep,97,97,97 [,5] 3,75 h7 [,5] 3,75 h7 = ø 6 h7 [0.4] ø 8 h7 [0.3] ø 0 f7 [0.39] ø h7 [0.47] ø /4 h7 ( = 5/8 ) ø 3/8 h7 ( = 5/8 ) ø /4 h8 ( = 7/8 ) ø 3/8 h8 ( = 7/8 ) [,5] 3,75 h7 3,3 0,3,3 0,3 3,3 0,3 7,7 0,37,7 0,3 max.50 43,7,7 43,7,743,7,7 max.50 max.50 max. max. 0,83 0,83 max. 0,83 7,7 0,3 50,8 50,8 44,45,75 5,3,06 44,45,75 50,8 5,3,06 44,45,75 5,3,06 7,5,84 9,5 3,59 7,5,84 3,3 0,3,3 0,3 3,3 0,3 53,,09 53,,0953,,09 MI-connector version 9,5 3,59,84 7,5 3,59 9,5 Servo flange, ø 63.5 [.5] Flange type E and F 3,33,, 6-3 UNC 3,5 0,5 3,50,5 0,5 63,5,5,8,8,8 58,87,3 63,5,5 3,75 h7 [,5] 63,5,5 58,87,3 58,87,3 3,75 h7 [,5] 3,75 h7 [,5] ,88 47,63,88,88 47,63 47,63 3,06 77,75 96,75 3,8 77,75 3,06 77,75 3,06 96,75 3,8 96,75 3,8 = ø 6 h7 [0.4] ø 8 h7 [0.3] ø 0 f7 [0.39] ø h7 [0.47] ø /4 h7 ( = 5/8 ) ø 3/8 h7 ( = 5/8 ) ø /4 h8 ( = 7/8 ) ø 3/8 h8 ( = 7/8 ) 7,5 0,3 7,5 7,50,30,3,65 0,,65,650,0,,65 0,,65,650,0, 39,5,56 39,5 39,5,56,56 56,5, 56,5 56,5,, 3x0 3x0 3x0 7,5 0,3 7,5 7,50,30,3 49,934949,93,93 MI-connector version Phone: Fax: Web: info@clrwtr.com

12 imensions hollow shaft version imensions in mm [inch] Flange with spring element, long Flange type and M3, 6 [0.4] deep Torque stop slot, recommendation: cylindrical pin IN7, 4 [0.6] 3 Recommended torque for the clamping ring 0.6 Nm 36,,43 0,8 37,9,49 33,7,33 50,8,5 3,75,3 33 max.,6 3,8 46 3x0 3,99-0,0 [0,6] 4 0,55,4 0,09,8 7,4 90,4 3, ,,35 37,5,48 45,,78 4,65 H7 43,7,7 54,,3 MI-connector version Flange with fastening arm, long Flange type 3 and 4 Recommended torque for the clamping ring 0.6 Nm 40,57 75, ,39 5 0, 0,87,4 0,45 Phone: Fax: Web: info@clrwtr.com

13 imensions hollow shaft version imensions in mm [inch] Flange with stator coupling, ø 65 [.56] Flange type 7 and 8 Recommended torque for the clamping ring 0.6 Nm 74 [,9] 65 [,56] 30 3x , 0, 63,48 68,68 0,5 0,0 45,,78 65 [,56] 57,5,5 54,6,5 3,5, ,8 [.0] 46,8 37 [.46] 50,8 [.0] Incremental encoders 4,3 [0.7] H7 50, [.98] 6,5 0,6 Flange with stator coupling, ø 63 [.48] Flange type C and Recommended torque for the clamping ring 0.6 Nm Flange with stator coupling, ø 57. [.5] Flange type 5 and 6 Recommended torque for the clamping ring 0.6 Nm 3, 0,3 H7 3x 0 50, [.98] 6,5 0,6 Phone: Fax: Web: info@clrwtr.com

14 imensions hollow shaft version imensions in mm [inch] Flange with spring element, long and tangential cable outlet Type of connection E, F and H M3, 6 [0.4] deep Torque stop slot, recommendation: cylindrical pin IN7, 4 [0.6] 3 Recommended torque for the clamping ring 0.6 Nm 46,3 [.8] 39, [.54] 35,8 [.4] 4 [.65] H7 50,8 [.0] 3,75 [.5] max 33 [.3] 3x0 3,99 [0.6] 4 [0.55],4 [0.09] 3 33,7 [.33] 37,9 [.49] M Phone: Fax: Web: info@clrwtr.com

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos

More information

ENCODER. SSI Multiturn. Series , Key-Features: Content:

ENCODER. SSI Multiturn. Series , Key-Features: Content: ENCOER SSI Multiturn Series 8.5863, 8.5883 Content: Order Code Shaft... Order Code Hollow Shaft...3 Order Code Blind Hollow Shaft...3 Connection...4 Technical rawing...5 Technical ata...8 Key-Features:

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional

More information

ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:

ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features: ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN

More information

Absolute Encoders Singleturn

Absolute Encoders Singleturn The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Absolute encoders multiturn

Absolute encoders multiturn Sendix M / M8 (shaft / hollow shaft) The Sendix M with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just x mm it

More information

ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:

ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features: ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog

More information

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is

More information

Rotary Measurement Technology Incremental Encoders

Rotary Measurement Technology Incremental Encoders -20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Standard SinCos. Shock / vibration resistant. Magnetic field proof. Flexible. . XXXX e

Standard SinCos. Shock / vibration resistant. Magnetic field proof. Flexible. . XXXX e sine wave output, SI/Pe, optical Sendix SI 8S / 8S (shaft / hollow shaft) The incremental encoders 8S and 8S of the Sendix SI family are suited for use in safety-related applications up to SI according

More information

Compact CANopen. RoHS 2/22. Shock / vibration resistant. High shaft load capacity e

Compact CANopen. RoHS 2/22. Shock / vibration resistant. High shaft load capacity e The Sendix M36 with Energy Harvesting Technology is an electronic encoder in miniature format, without gear and without battery. It is characterized by robustness, reliability and cost-efficiency. pending

More information

Rotary Measurement Technology Absolute Encoders, Multiturn

Rotary Measurement Technology Absolute Encoders, Multiturn Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix F58 multiturn with patented Intelligent Scan Technology is a particularly high resolution optical multiturn encoder without gears and with 00 percent magnetic insensitivity. bits total resolution,

More information

Rotary Measuring Technology

Rotary Measuring Technology SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,

More information

Absolute encoders multiturn

Absolute encoders multiturn bsolute encoders multiturn Sendix F / F (shaft / hollow shaft) The Sendix F multiturn with patented Intelligent Scan Technology is a particularly high resolution optical encoder without gears and with

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant bsolute encoders Sendix F / F (shaft / hollow shaft) The Sendix F is a particularly high resolution optical encoder without gears and with 00 percent magnetic insensitivity. bits total resolution, shaft

More information

Standard SinCos. Magnetic field proof. Shock / vibration resistant. Flexible. XXXX e

Standard SinCos. Magnetic field proof. Shock / vibration resistant. Flexible. XXXX e Sine wave output, SIL/PLd, optical Sendix SIL 58FS / 58FS (Shaft / Hollow shaft) The incremental encoders 58FS and 58FS of the Sendix SIL family are suited for use in safety-related applications up to

More information

Absolute encoders multiturn

Absolute encoders multiturn The absolute multiturn encoders 586FS and 588FS of the Sendix SIL family are suited for use in safety-related applications up to SIL according to EN 6800-5- or PLd to EN ISO 89-. The extra strong Safety-Lock

More information

Standard EtherNet / IP. RoHS IP65. High shaft load capacity. High protection level

Standard EtherNet / IP. RoHS IP65. High shaft load capacity. High protection level bsolute encoders Sendix F / F (shaft / hollow shaft) The Sendix F with patented Intelligent Scan Technology is a particularly high resolution optical encoder without gears and with 00 percent magnetic

More information

Rotary Position Technology

Rotary Position Technology Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn SIL/PLd, optical Sendix SIL 585FS / 587FS (Shaft / Hollow shaft) The absolute singleturn encoders 585FS and 587FS of the Sendix SIL family are suited for use in safety-related applications up to SIL according

More information

Rotary Measuring Technology

Rotary Measuring Technology Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable

More information

Absolute encoders - singleturn

Absolute encoders - singleturn The singleturn encoders and with PROFINT interface and sensor technology are ideal for use in all applications with a PROFINT interface. The encoder supports the IRT mode and is therefore ideal for realtime

More information

Incremental Encoder Model: FOI58

Incremental Encoder Model: FOI58 Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85

More information

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation

More information

Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications

Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications Product Information RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications September 2013 RCN 2000 series Absolute angle encoders for safety-related applications Safe absolute

More information

Linear measuring technology

Linear measuring technology or analogue sensor These draw wire mechanics D135 can be used up to a measuring length of 425 metres This draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or

More information

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS

Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS Online data sheet DS60ETECJD1024 DS60 Core C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DS60ETECJD1024 DS60ETECJD1024 Other models and accessories www.sick.com/ds60_core Illustration

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

More information

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6. IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration

More information

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

Absolute encoders - SSI

Absolute encoders - SSI with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

847H. Description. Features. Specifications

847H. Description. Features. Specifications 847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536

More information

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

More information

Product Overview. Rotary Encoders with Optimized Scanning

Product Overview. Rotary Encoders with Optimized Scanning Product Overview Rotary Encoders with Optimized Scanning November 2006 Rotary encoders for electrical drives are subject to high requirements: they are expected to function reliably and provide dependable

More information

Encoder WDGI 58E.

Encoder WDGI 58E. Encoder WDGI E www.wachendorffautomation.com/wdgie Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85 Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit

More information

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800 NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:

More information

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096

More information

Incremental Encoder for special applications

Incremental Encoder for special applications Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance

More information

DGS 60, DGS 65 and DGS 66: Incremental Encoders for rough environmental conditions

DGS 60, DGS 65 and DGS 66: Incremental Encoders for rough environmental conditions , 5 and : s for rough environmental conditions elect your individual encoder - Possible product variants: and mm solid shafts with servo flange or face mount flange, through or blind hollow shafts with

More information

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

RoHS. Versatile. X d. XXXX a. XXXX e. c Output circuit depends on the encoder used. d Type of connection depends on the encoder used

RoHS. Versatile. X d. XXXX a. XXXX e. c Output circuit depends on the encoder used. d Type of connection depends on the encoder used These draw wire mechanics D135 can be used up to a measuring length of 425 meters This draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or absolute interface,

More information

A02H Encoder for Vector Motor Application

A02H Encoder for Vector Motor Application A02H Encoder for Vector Motor Application NEMA C-Face Accessories Robust Bearing Design Long Life BTR Lip Seals 6000 RPM Continous Duty M12 eurofast Connector www.turck.com The A02H Kübler by TURCK 3.5

More information

Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile.

Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile. Rotary encoders absolute / optical right ideas in the measurement of rotation: robust, precise, versatile. Absolute encoder WK02/1 Hollow shaft WK02/1 - robust single-turn angle encoder with through hollow

More information

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS

Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS Online data sheet DFS60S-S1O01024 DFS60S Pro D E F Illustration may differ Ordering information Type Part no. DFS60S-S1O01024 1069517 Other models and accessories www.sick.com/dfs60s_pro H I J K L M N

More information

Encoder WDGI 58H.

Encoder WDGI 58H. Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING

More information

Incremental hollow shaft encoder BRIH EcoMag

Incremental hollow shaft encoder BRIH EcoMag Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply

More information

DG 60 L Incremental Encoder

DG 60 L Incremental Encoder Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square

More information

Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800 NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection

More information

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS

Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information

More information

Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface

Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface Product Information EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface 11/2017 EQN 1337 F Rotary encoders for absolute position values Installation diameter 65 mm

More information

Standard Industrial Types RI 58-O / RI 58-T

Standard Industrial Types RI 58-O / RI 58-T Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable

More information

Standard Industrial types RI 36-H

Standard Industrial types RI 36-H Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /

More information

Incremental and Absolute Encoders

Incremental and Absolute Encoders by Incremental and Absolute Encoders Kübler by TURCK Founded by Fritz Kübler in 1960 with the introduction of the patented KM1 timer meter, Fritz Kübler has expanded to become a global technology leader

More information

Standard Industrial types RI 58-O / RI 58-T

Standard Industrial types RI 58-O / RI 58-T Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock

More information

Encoder WDG 100H.

Encoder WDG 100H. Encoder WDG 00H www.wachendorffautomation.com/wdg00h Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

The ZSH stepper motor convinces with its robust housing with high-strength cable gland. The motor is waterproof up to 10 m with the IP68 option.

The ZSH stepper motor convinces with its robust housing with high-strength cable gland. The motor is waterproof up to 10 m with the IP68 option. /ZSH HRSH ZSH Stepper otor Robust. Powerful. Reliable. Phytron s HRSHEnvironment motors are particularly suitable for challenging applications in mechanical engineering and industry. Challenging conditions

More information

QR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW

QR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole

More information

Incremental Shaft Encoders Industrial types

Incremental Shaft Encoders Industrial types Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Operating temperature up to 100 C (RI 58-T) Flexible due to many

More information

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O

More information

Encoder - Absolut 2RMHF-SSI

Encoder - Absolut 2RMHF-SSI Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical

More information

Encoder WDG 58H.

Encoder WDG 58H. Encoder WDG H www.wachendorffautomation.com/wdgh Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for

More information

JR12 Jam Nut Mount Optical Encoder

JR12 Jam Nut Mount Optical Encoder Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions

More information

Encoder WDG 50B.

Encoder WDG 50B. Encoder WDG 0B www.wachendorffautomation.com/wdg0b Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

T10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en

T10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en T10FS Torque Flange Data Sheet Special features Nominal (rated) torques: 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm, 10 knvm Nominal speed from 12,000 rpm to 24,000 rpm Low rotor weights

More information

Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS0-JP FS/FM0 SSI FS0-JP FS/FM0 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FS0-JP 09 Other models and accessories www.sick.com/fs_fm0_ssi Illustration may

More information

PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI Compact design: 50 mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status information Use of sine/ cosine signals for fast control task

More information

TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T

TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock

More information

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number

More information

Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI

Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable

More information

Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories

More information

Incremental Shaft Encoders Industrial types

Incremental Shaft Encoders Industrial types Synchro flange! Universal industry standard encoder! Up to 40,000 steps with 10,000 pulses! High signal accuracy! Protection class up to IP 67! Operating temperature up to 100 C (RI 58-T)! Flexible due

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps

More information

Product Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control

Product Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control Product Information ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control July 2017 ECN/ERN 1300 series Rotary encoders with integral bearings for elevator

More information