CPH6071 CPH6071. Features. Specifications. SANYO Electric Co.,Ltd. Semiconductor Company

Transcription

1 Ordering number : ENN CPH61 CPH61 Features NPN / PNP Epitaxial Planar Silicon Transistors Video Output Driver,High-Frequency Amplifier Applications Composite type with NPN transistor and PNP transistor contained in the conventional CPH package improving the mounting efficiency greatly. The CPH61 is formed with two chips, being equivalent to the SC44 and the other the SA14, placed in one package. Specifications Absolute Maximum Ratings at Ta= C Parameter Symbol Conditions Ratings Unit [TR1()] Collector-to-Base Voltage VCBO V Collector-to-Emitter Voltage VCEO V Emitter-to-Base Voltage VEBO V Collector Current IC ma Collector Current (Pulse) ICP 6 ma Collector Dissipation PC Mounted on a ceramic board (6mm.8mm).9 W [TR()] Collector-to-Base Voltage VCBO -- V Collector-to-Emitter Voltage VCEO -- V Emitter-to-Base Voltage VEBO -- V Collector Current IC -- ma Collector Current (Pulse) ICP --6 ma Collector Dissipation PC Mounted on a ceramic board (6mm.8mm).9 W [Common Ratings] Total Dissipation PT Mounted on a ceramic board (6mm.8mm) 1.1 W Junction Temperature Tj C Storage Temperature Tstg -- to + C Marking : GH Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-, 1 Chome, Ueno, Taito-ku, TOKYO, 1-84 JAPAN N4 TS IM TB-886 No.-1/

2 CPH61 Electrical Characteristics at Ta= C [TR1()] Parameter Symbol Conditions Ratings min typ max Collector Cutoff Current ICBO VCB=V, IE=.1 µa Emitter Cutoff Current IEBO VEB=V, IC=. µa DC Current Gain hfe(1) VCE=V, IC=mA hfe() VCE=V, IC=mA Gain-Bandwidth Product ft VCE=V, IC=mA. GHz Output Capacitance Cob VCB=V, f=1mhz.9 pf Reverse Transfer Capacitance Cre VCB=V, f=1mhz.6 pf Collector-to-Emitter Saturation Voltage VCE(sat) IC=mA, IB=mA.1. V Base-to-Emitter Saturation Voltage VBE(sat) IC=mA, IB=mA.9 1. V [TR()] Collector Cutoff Current ICBO VCB=--V, IE= --.1 µa Emitter Cutoff Current IEBO VEB=--V, IC= -- µa DC Current Gain hfe(1) VCE=--V, IC=--mA 1 hfe() VCE=--V, IC=--mA Gain-Bandwidth Product ft VCE=--V, IC=--mA 1. GHz Output Capacitance Cob VCB=--V, f=1mhz 4.9 pf Reverse Transfer Capacitance Cre VCB=--V, f=1mhz 4.4 pf Collector-to-Emitter Saturation Voltage VCE(sat) IC=--mA, IB=--mA V Base-to-Emitter Saturation Voltage VBE(sat) IC=--mA, IB=--mA V Unit Package Dimensions unit : mm : Base : Emitter : Base1 4 : Collector1 : Emitter1 6 : Collector SANYO : CPH6 Electrcal Connection 6 4 Tr Tr1 1 1 : Base : Emitter : Base1 4 : Collector1 : Emitter1 6 : Collector Top view 4 µa 4µA 4µA µa µa µa µa µa µa µa IB= Collector-to-Emitter Voltage, VCE -- V ITR ma --1.8mA --1.6mA --1.4mA --1.mA --ma --.8mA --.6mA --.4mA --.ma IB= Collector-to-Emitter Voltage, VCE -- V ITR48 No.-/

3 CPH61 Collector Current, IC -- ma DC Current Gain, hfe mA 1.8mA 1.6mA 1.4mA 1.mA ma.8ma.6ma.4ma.ma IB= 1 4 Collector-to-Emitter Voltage, V CE -- V ITR14 hfe -- IC V CE =V Collector Current, IC -- ma DC Current Gain, hfe ma --4.mA --4.mA --.ma --.ma --.ma --.ma --1.mA --ma --.ma I B = Collector-to-Emitter Voltage, V CE -- V ITR488 hfe -- IC V CE = --V Gain-Bandwidth Product, ft -- GHz ITR14 ft -- IC V CE =V Gain-Bandwidth Product, ft -- GHz ITR489 ft -- IC V CE = --V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V.1 ITR144.1 VCE(sat) -- IC I C / I B = ITR14 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V ITR49 -- I C / I B = --.1 VCE(sat) -- IC ITR491 No.-/

4 CPH61 Cob, Cre -- VCB f=1mhz Cob, Cre -- VCB f=1mhz Cob, Cre -- pf Cre Cob Cob, Cre -- pf Cob Cre ITR Collector-to-Base Voltage, V CB -- V A S O I CP =6mA I C =ma Ta= C ms DC operation 1ms Collector-to-Emitter Voltage, V CE -- V IT61 PC -- Ta / I C = --ma ITR49 Collector-to-Base Voltage, V CB -- V A S O I CP = --6mA Ta= C DC operation ms 1ms Collector-to-Emitter Voltage, V CE -- V IT6 Collector Dissipation, P C -- W Mounted on a ceramic board (6mm.8mm) Ambient Temperature, Ta -- C IT6699 No.-4/

5 CPH61 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 4. Specifications and information herein are subject to change without notice. PS No.-/