SMT Power Inductor High Current Molded Power Inductor - PA4345.XXXNLT Series

Transcription

1 High Current Molded Power Inductor - PA5.XXXNLT Series NEW - AEC-Q Qualified Height:.mm Max Footprint:.mm x 5.mm Max Current Rating: up to 1.A Inductance Range:.1uH to 1.5uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux Part Number Inductance 1KHz, 1V Electrical 5 C - Operating Temperature - C to + C Rated Current MAX. DC Resistance Saturation Current Max. uh A mω mω A PA5.11NLT.1±% PA5.1NLT.±% PA5.1NLT.±% PA5.1NLT.±% PA5.1NLT.±% PA5.71NLT.7±% PA5.1NLT.±% PA5.1NLT 1.±% PA5.1NLT 1.±% PA5.NLT 1.5±% Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range.. The saturation current is the current at which the initial inductance drops approximately % at the stated ambient temperature. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. TYP.. The rated current is the DC current required to raise the component temperature by approximately C. Take note that the components performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation.. The part temperature (ambient+temp rise) should not exceed C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. USA Germany Singapore Shanghai 1 77 China 5 97 Taiwan 57 1 pulseelectronics.com P77.C (7/1)

2 High Current Molded Power Inductor - PA5.XXXNLT Series PA5.XXXNLT Mechanical Final Layout SUGGESTED PAD LAYOUT Series A B C D E F G H PA5.XXXNLT. Max 5. Max. Max (.5) (.5) (.) (.) (.) All Dimensions in mm. TAPE & REEL INFO SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY A B G N E F D P P P W T K PCS/REEL 1 PA5.XXXNLT Ø N/A pulseelectronics.com P77.C (7/1)

3 High Current Molded Power Inductor - PA5.XXXNLT Series Typical Performance Curves PA5.11NLT PA5.1NLT PA5.1NLT PA5.71NLT PA5.1NLT PA5.1NLT pulseelectronics.com P77.C (7/1)

4 High Current Molded Power Inductor - PA5.XXXNLT Series PA5.1NLT PA5.NLT PA5.NLT PA5.NLT PA5.7NLT PA5.5NLT pulseelectronics.com P77.C (7/1)

5 High Current Molded Power Inductor - PA5.XXXNLT Series PA5.NLT PA5.NLT PA5.1NLT For More Information Pulse Worldwide Headquarters 1 World Trade Drive San Diego, CA 91 U.S.A. Pulse Europe Pulse Electronics GmbH Am Rottland 1 55 Meinerzhagen Germany Pulse China Headquarters B, Shenzhen Academy of Aerospace Technology Bldg. 1th Kejinan Road High-Tech Zone Nanshan District Shenzhen, PR China 57 Tel: 5 97 Fax: 5 97 Pulse North China Room 7/ Super Ocean Finance Ctr. 7 Yan An Road West Shanghai China Pulse South Asia 15 Joo Seng Road #- PM Industrial Bldg. Singapore Pulse North Asia F, No. 19 Zhongyuan Road Zhongli City Taoyuan County Taiwan R. O. C. Tel: 57 Fax: 5 (Pulse) Fax: 5 (FRE) Tel: Fax: 5 7 Tel: Fax: Tel: 1 77 Fax: 1797 Tel: Fax: Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 1. Pulse Electronics, Inc. All rights reserved. 5 pulseelectronics.com P77.C (7/1)