Electrical 25 C Operating Temperature -40 C to 130 C 5. (3-4) 370mW MAX
|
|
- Morgan Ramsey
- 6 years ago
- Views:
Transcription
1 Power Range: Up to 0W Height: 1.7mm Max Footprint: 17.7mm x 14.0mm Max Topology: Forward and Flyback Electrical 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (-4) 1.7µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 7.5µH MAX (-4) 440mW MAX PA11NL DCR (8,7-10,9) mw MAX (-1) 88mW MAX K1 Factor 15. Pri. Inductance (-4) 1.7µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 7.5µH MAX (-4) 40mW MAX PA117NL DCR (8,7-10,9) 1mW MAX (-1) 94mW MAX K1 Factor 15. Pri. Inductance (-4) 1.7µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 7.5µH MAX (-4) 40mW MAX PA118NL DCR (8,7-10,9) 55mW MAX (-1) 94mW MAX K1 Factor 15. Pri. Inductance (-4) 88µH ±10% Lk. Inductance (-4) with (10,9,8,7,) shorted 7.5µH MAX (-4) 70mW MAX PA110NL DCR ( 8,7-10,9) mw MAX ( -1) 145mW MAX (-8,7) 0mW MAX K1 Factor 118. Pri. Inductance (-4) 480µH ±10% Lk. Inductance (-4) with (10,8,7,) shorted 10µH MAX (-4) 570mW MAX PA118NL DCR (8-10) 15mW MAX (-7) 40mW MAX (-1) 5mW MAX K1 Factor 518. Pri. Inductance (-4) 77.4µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 0.8µH MAX (-4) 0mW MAX PA10NL DCR (8,7-10,9) 18mW MAX (-1) 50mW MAX K1 Factor V / 4.1A 5V /.7A 1V / 1.1A 5V / 0.1A 1.V / 4W V / 4.09A 5V / 5W 5V / 1.5W 1 P75.C (1/09)
2 Electrical 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (4-1) 155.5µH ±10% Lk. Inductance (4-1) with (10,9,8,7) shorted 5µH MAX (4-1) 0mW MAX PA17NL DCR (7,8-9,10) 11mW MAX (5-) 50mW MAX K1 Factor 15.1 Pri. Inductance (-4) 77.4µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 0.8µH MAX (-4) 100mW MAX PA19NL DCR (8,7-10,9).5mW MAX (-1) 70mW MAX K1 Factor Pri. Inductance (-4) 77.4µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 0.8µH MAX (-4) 100mW MAX PA17NL DCR (8,7-10,9) 75mW MAX (-1) 70mW MAX K1 Factor Pri. Inductance (-4) 1.4µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 0.7µH MAX (-4) 8mW MAX PA109NL DCR (8,7-10,9) 10mW MAX (-1) 00mW MAX K1 Factor Pri. Inductance (,4-,1) 104.µH ±0% Lk. Inductance (,4-,1) with (10,9,8,7) shorted 0.5µH MAX (,4-,1) 0mW MAX PA17NL DCR (7-9) 55mW MAX (8-10) 405mW MAX K1 Factor 57.0 Pri. Inductance (,4) 40µH ±10% Lk. Inductance (,4) with (10,9,8,7) shorted µh MAX (,4) 95mW MAX PA140NL DCR (8,7-10,9) 8mW MAX (-1) mw MAX Hi-Pot Pri-Sec 150Vrms K1 Factor 105. Pri. Inductance (,4) 8.9µH ±10% Lk. Inductance (,4) with (10,9,8,7) shorted 1µH MAX (,4) 58mW MAX PA158NL DCR (8,7-10,9) 7mW MAX (-1) 55mW MAX K1 Factor V-50V 9V-1V V / 11W.V / 4A 1V / 1.5W.V / 4.A 4.1 FORWARD TRANSFORMER 4V-57V V / 0.5A 4V / 0.5A 1V / 1.1A 15V / 7W P75.C (1/09)
3 Electrical 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (,4) 0.4µH ±0% Lk. Inductance (,4) with (10,9,8,7) shorted 1.5µH MAX (,4) mw MAX PA157NL DCR (8,7-10,9).5mW MAX (-1) 58mW MAX K1 Factor 4.7 Pri. Inductance (,4) 0.4µH ±0% Lk. Inductance (,4) with (10,9,8,7) shorted 1.5µH MAX (,4) mw MAX PA1577NL DCR (7-9)=(8-10) 54mW MAX (-1) 55mW MAX K1 Factor 4.7 Pri. Inductance (,4) 4µH ±10% Lk. Inductance (,4) with (10,9,8,7) shorted 1.5µH MAX (,4) 75mW MAX PA18NL DCR (8,7-10,9) 10mW MAX (-1) 10mW MAX K1 Factor 14 Pri. Inductance (,4) 57.µH ±10% Lk. Inductance (,4) with (10,9,8,7) shorted.5µh MAX (,4) 110mW MAX PA198NL DCR (8,7-10,9) mw MAX (-1) 88mW MAX K1 Factor 10.8 Pri. Inductance (-4) 108µH ±7% Lk. Inductance (-4) with (10,9,8,7,) shorted 5µH MAX (-4) 0mW MAX PA1718NL DCR (8,7-10,9) 15mW MAX (-1) 15mW MAX (-8,7) 0mW MAX K1 Factor 184. Pri. Inductance (,4).7µH ±7% Lk. Inductance (,4) with (10,9,8,7) shorted 0.5µH MAX (,4) 5mW MAX PA179NL DCR (8,7-10,9).5mW MAX (-1) 115mW MAX K1 Factor 81.8 Pri. Inductance (1,4) 115.5µH ±7% Lk. Inductance (1,4) with (10,9,8,7) shorted 0.5µH MAX (1,4) 0mW MAX PA181NL DCR (7,8-9,10) 11mW MAX (5-) 40mW MAX K1 Factor 145. V-8V 00kHz 10V / 50mA 8V-8V 00kHz 10V / 50mA V / 1A FORWARD TRANSFORMER V-0V 18V-7V V-75V V-0V V / 1.5A 1V / 1.5A 5V /.4A.V / 1W 8,7 Sec. Aux 5V / 1W 10,9 5V /.4A.V / 11W P75.C (1/09)
4 Electrical 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (5-4) 14µH ±10% Lk. Inductance (5-4) with (10,9,8,7) shorted µh MAX (5-4) 9mW MAX PA070NL DCR (7,8-9,10) 8.5mW MAX PA08NL (-1) 0mW MAX K1 Factor 8. Pri. Inductance (-) 14µH ±10% Lk. Inductance (-) with (10,9,8,7) shorted µh MAX DCR (-) 9mW MAX (5-4) 4mW MAX (9-10) 17mW MAX (7-8) 100mW MAX K1 Factor 8. Pri. Inductance (1-) 17.4µH ±8% Lk. Inductance (1-) with (10,9,7,,5,4) shorted 0.75µH MAX (1-) 100mW MAX PA194NL DCR (9,10-,7) 15.5mW MAX PA04NL (4-5) 590mW MAX K1 Factor 4.4 Pri. Inductance (,-4,5) 5µH ±8% Lk. Inductance (,-4,5) with (10,9,8,7) shorted 0.5µH MAX DCR (,-4,5) 0mW MAX (8,7-10,9) 10.mW MAX K1 Factor 0.5 Pri. Inductance (5-4) 15µH ±10% Lk. Inductance (5-4) with (10,9,8,7) shorted 4µH MAX (5-4) 80mW MAX PA1NL DCR (7,8-9,10) 5.mW MAX (-1) 7mW MAX K1 Factor 45.9 Pri. Inductance (-4) 10µH ±10% Lk. Inductance (-4) with (10,9,8,7) shorted 1µH MAX (-4) mw MAX PA71NL DCR (8,7-10,9).7mW MAX (-1) 54mW MAX K1 Factor 51.8 V-0V 10V / 0 ma 8 8 5V /.4A 5V / 9.5W 10V / 0.0A 1V / 1.5W 10V / 0.0A 1 5V / 15W * please note this part has an alternate pin-out per note 5. 10V-14V 1..V /.A V-0V 10V / 0mA 7V-57V 10.7.V / 1W 5V / 1W P75.C (1/09)
5 Electrical 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (5-4) 50µH ±10% Lk. Inductance (5-4) with (10,9,8,7) shorted 4µH MAX (5-4) 140mW MAX PA97NL DCR (7,8-9,10).5mW MAX (-1) 7mW MAX K1 Factor Pri. Inductance (1-) 85µH ±10% Lk. Inductance (1-) with (10,9,8,7,,5,4) shorted 0.75µH MAX (1-) 5mW MAX PA00NL DCR (9,10-,7) 9mW MAX (4-5) 815mW MAX K1 Factor Pri. Inductance (1-) 100µH ±10% Lk. Inductance (1-) with (10,9,7,,5,4) shorted 0.875µH MAX (1-) 10mW MAX PA8NL DCR (,7-9,10) 9mW MAX (4-5) 580mW MAX K1 Factor 18. Pri. Inductance (-1) 85µH ±8% Lk. Inductance (-1) with (10,9,7,,5,4) shorted 0.75µH MAX (-1) 5mW MAX PA7NL DCR (9,10-,7) 5.5mW MAX (4-5) 815mW MAX K1 Factor Pri. Inductance (5-) 7µH ±10% Lk. Inductance (5-) with (,7,9,10) shorted 0.75µH MAX (5-) 89mW MAX PA9NL DCR (,7-9,10).mW MAX (-1) 84mW MAX K1 Factor Pri. Inductance (1-) 50µH ±8% Lk. Inductance (1-) with (10,9,7,,5,4) shorted 0.5µH MAX (1-) 75mW MAX PA417NL DCR (,7-9,10).5mW MAX (4-5) 88mW MAX K1 Factor 5. 10V / 0mA 10V / 0.0A V / 4.7A.V / 10W FLYBACK TRANSFORMER * please note this part has an alternate pin-out per note 5. 1V / 10mA 4.14 V-57V.7 10V / 0.0A 7V-57V 1V / 0.0V V-7V 00kHz 1V / 10mA V / 4.8A 1 5V / 10W 1 5V / 5A 5V / 1A 5 P75.C (1/09)
6 Electrical 5 C Operating Temperature -40 C to 10 C 5 Pri. Inductance (1-) 49.µH ±8% Lk. Inductance (1-) with (10,9,7,,5,4) shorted 0.5µH MAX (1-) 8mW MAX PA41NL DCR (,7-9,10).5mW MAX (4-5) 970mW MAX K1 Factor 8.5 Pri. Inductance (1-4) with (-) shorted 80µH ±10% PA47NL DCR Lk. Inductance (1-4) with (-) and (9-10) shorted TBDµH MAX (1-) 47mW MAX (-4) 58mW MAX (-7) 155mW MAX (8-10) 1mW MAX K1 Factor Pri. Inductance (1-) 100µH ±10% Lk. Inductance (1-) with (10,9,7,,5,4) shorted TBDµH MAX (1-) 99mW MAX PA45NL DCR (,7-9,10).mW MAX (4-5) 00mW MAX K1 Factor 1.4 Pri. Inductance (5-) 7µH ±10% Lk. Inductance (5-) with (,7,9,10) shorted 0.75µH MAX (5-) 89mW MAX PA4NL DCR (,7-9,10) 4.mW MAX (-1) 9mW MAX K1 Factor Pri. Inductance (5-) 7µH ±10% Lk. Inductance (5-) with (,7,9,10) shorted 0.75µH MAX (5-) 89mW MAX PA47NL DCR (,7-9,10) 8mW MAX (-1) 9mW MAX K1 Factor V-0V 5kHz. 5.1V / 5A 1V / 10mA.4 9-V- / -0V.V / A V-7V 1V / 10mA.75 5V / 4.8A 4 7V-57V.7.V / 7.5A 1V / 0.0A 4 7V-57V 1 1V /.1A 1V / 0.0A P75.C (1/09)
7 Notes 1. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range.. The above transformers and inductors have been tested and approved by Pulse s power IC partners and are sited in the appropriate datasheet or evaluation board documentation at these companies. To determine which IC and IC partners are matched with the above Pulse part numbers please consult the IC Cross Reference on the Pulse website.. For flyback topology applications, it is necessary to ensure that the transformer will not saturate in the application. The peak flux density (Bpk) should remain below 700Gauss. To calculate the peak flux density use the following formula: Bpk (Gauss) = K1_Factor * Ipk(A) 4. In high volt-µsec applications, it is important to calculate the core loss of the transformer. Approximate transformer core loss can be calculated as: CoreLoss (W) = E-14 * (Freq_kHz) 1. * (DB_Gauss). where DB can be calculated as: For Flyback Topology: DB = K1_Factor * D(A) For Forward Topology: DB = K1_Factor * Volt-µsec Mechanical 5. The standard pin-numbering for this package is indicated in the below mechanical drawing showing pin 1 on the lower right corner and the numbers proceeding clockwise to pin 10 on the upper right corner. However, for those parts that are indicated as having an alternate pinout, pin 1 is in the lower left corner and the numbers proceed counterclockwise to pin 10 in the upper left corner.. Optional Tape & Reel packaging can be ordered by adding a T suffix to the part number (i.e. PA11NL becomes PA11NLT). Pulse complies with industry standard tape and reel specification EIA481. The tape and reel for this product has a width (W=mm), pitch (Po=4mm) and depth (Ko=1.mm). 7. The NL suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the NL suffix, but an RoHS compliant version is required, please contact Pulse for availability. For More Information: Pulse Worldwide Headquarters 10 World Trade Dr. San Diego, CA 918 U.S.A. TEL: FAX: Pulse European Headquarters Einsteinstrasse 1 D-7108 Herrenberg Germany TEL: FAX: Pulse China Headquarters B40, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China TEL: FAX: Pulse North China Room 150 XinYin Building No. 888 YiShan Rd. Shanghai 00 China TEL: FAX: Pulse South Asia 150 Kampong Ampat #07-01/0 KA Centre Singapore 84 TEL: FAX: Pulse North Asia No. Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. 7 TEL: FAX: This is a Preliminary product data sheet. Products mentioned on this data sheet are in development and in the process of being qualified. These products are not fully released nor are they in production. Features, specifications and performance of products offered are subject to change without notice. Other brand and product names mentioned herein may be products and/or registered trademarks of their respective owners. For current information on this product, please contact the Pulse office nearest you and ask for the Power Applications Engineer. Copyright, 008. Pulse Engineering, Inc. All rights reserved. 7 P75.C (1/09)
HIGH FREQUENCY WIRE WOUND TRANSFORMERS EP13 Platforms - SMT
EP Platforms - SMT Power Range: up to 0W Height:.mm Max Footprint:.mm x.0mm Max Toplogy: Forward and Flyback PANL PANL PANL PANL Electrical Specifications @ C - Operating Temperature -0 C to +0 C Pri.
More informationT3/DS3/E3/STS-1 TRANSFORMERS
T/DS/E/STS- TRANSFORMERS Designed for T, DS, E and STS- Interfaces RoHS peak reflow temperature rating: C Return loss meets requirements of G.70 Fast rise time compatible with standards Through hole and
More informationSMT Power Inductor High Current Molded Power Inductor - PA4345.XXXNLT Series
High Current Molded Power Inductor - PA5.XXXNLT Series NEW - AEC-Q Qualified Height:.mm Max Footprint:.mm x 5.mm Max Current Rating: up to 1.A Inductance Range:.1uH to 1.5uH Shielded construction and compact
More informationSMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series
High Current Molded Power Inductor - PA.XXXNLT Series NEW - AEC-Q Qualified Height:.mm Max Footprint:.mm x 5.mm Max Current Rating: up to A Inductance Range:.uH to uh Shielded construction and compact
More informationT1/E1/CEPT/ISDN-PRI TRANSFORMERS
/CEPT/ISDNPRI TRANSFORMERS RoHS Compliant Part Number Turns Ratio (Pri:Sec ±2%) RoHS peak reflow temperature rating 245 C Models matched to leading quad and dual T1/ E1/CEPT/ISDNPRI transceivers Crosstalk:
More informationAutomotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal
More informationPulseJack Surface Mount 1x1
Description: 00 Base-TX (Fast Ethernet) surface mount RJ single port (x) Tab-UP/DOWN with or without LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network
More informationPulseJack 1x1 Tab-UP RJ45
x Tab-UP RJ Description: 00 Base-TX (Fast Ethernet) RJ x Tab-UP with LEDs -pin (J series) and -pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard,
More informationGENERAL PURPOSE TRANSFORMERS
Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available
More informationAutomotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Part Number PE-20ACCXXXSTS Common Mode Impedance (0MHZ) Min Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and
More informationT1/Cept/ISDN-PRI Transformers
T/Cept/ISDNPRI Transformers Dual Surface Mount, 500 Vrms, xtended & Standard Temperature Range RoHS6 Compliant (Pri:Sec ±2%) xtended Temperature Range Models OCL @ 25 C (mh MIN) RoHS peak reflow temperature
More informationSMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
More informationBIPOLAR HALL-EFFECT POSITION SENSORS
General Description The is an integrated Hall-effect latched sensor designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic
More informationSMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
More informationSINGLE PHASE HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with H- bridged output driver designed for brushless DC motor applications. The device includes an on-chip Hall sensor for magnetic sensing, an amplifier
More informationHP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
More informationDUAL BIPOLAR OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description The consists of two high performance operational amplifiers. The IC features high gain, low equivalent input noise voltage, high input resistance, excellent channel separation, wide
More information150kHz 3A BUCK DC-DC CONVERTER General Description. Features. Applications
General Description The series of regulators are fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a A load with excellent line and load regulation. These regulators include internal
More information5A LOW DROPOUT LINEAR REGULATOR. Features. Applications
General Description The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting which provides protection
More informationCONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER General Description. Features. Applications
General Description The is a highly integrated solution for a constant voltage/constant current mode SMPS application. The contains one 1.21V voltage reference with ±1% accuracy, one current sensing circuit
More information1A LOW NOISE CMOS LDO REGULATOR WITH ENABLE. Features
General Description The is CMOS process low dropout linear regulator with enable function, the regulator delivers a guaranteed 1A (Min.) continuous load current. The features low power consumption. The
More informationPin Configuration T Package (TO-220-) S/SA Package (TO-26-) S SA 2 1 GND 2 1 GND 2 1 GND DA Package (TO-252-2(1)) (TO-252-2(2)) 2 GND 2 GND 1 1 (TO-25
General Description The AZ9150 is low dropout three-terminal regulator with a typical dropout of 75mV at 1.5A output current. The AZ9150 provides current limit and thermal shutdown. On-chip thermal shutdown
More informationECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
More informationADJUSTABLE PRECISION SHUNT REGULATORS General Description. Features. Applications
General Description The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range. These ICs feature sharp turn-on characteristics, low temperature
More informationPrimary Side Power Switcher for Off-line SMPS. Features
General Description The consists of a primary side regulation controller and a high voltage transistor, and is specially designed for off-line power supplies within 4W output power. Typical applications
More informationFeatures. Applications
General Description The is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous
More informationADJUSTABLE PRECISION SHUNT REGULATORS General Description. Features. Applications
General Description Features The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature
More information1.5MHz STEP-UP DC-DC CONVERTER General Description. Features. Applications
General Description The is a high power, constant frequency, current mode PWM, inductor based, step-up (boost) converter. The converter operates at high frequency (1.5MHz) so that a small, low profile
More information(TCLP/TCVP) SMD Power Wire wound Toroidal Inductor
Version: February 28, 2017 Electronics Tech. (TCLP/TCVP) SMD Power Wire wound Toroidal Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong
More informationWHITE LED STEP-UP CONVERTER General Description. Features. Applications
General Description The is an inductor-based DC/DC converter designed to drive up to six white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain satisfied
More information100mA REGULATED CHARGE PUMP General Description. Features. Applications
General Description The are regulated step-up DC/DC converters based on charge pump technique. These ICs have the ability to supply 100mA constant output current or 250mA peak output current for 100ms
More information340kHz, 2A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation.
More informationData Sheet. Features. General Description. Applications. Single Stage Primary Side Regulation PFC Controller For LED Driver
General Description The is a high performance AC/DC universal input Primary Side Regulation Power Factor Controller for LED driver applications. The device uses Pulse Frequency Modulation (PFM) technology
More information600mA LOW DROPOUT LINEAR REGULATOR 600mA ULDO REGULATOR WITH ENABLE. Features. Applications
General Description The is a series of ultra low dropout regulators optimized for low voltage applications where transient response and minimum input voltage are critical. The provides current limit and
More informationDUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
More informationAZ386 General Description. Features. Applications
General Description The is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 0 to keep external part count low, but the addition of an external resistor
More information340kHz, 2A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation.
More informationMini Wideband Transformers WBC
Document - Mini Wideband Transformers WBC Smallest wideband transformer: mm square mm high Vrms interwinding isolation, / Watt RF input power ma max current rating. Designer s Kit C contains three of each
More informationWideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
More informationPULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications
General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists of a reference voltage circuit, two error
More information1A 3-TERMINAL POSITIVE VOLTAGE REGULATOR General Description. Features. Applications
General Description The series are three terminal positive voltage regulators designed for a wide variety of applications including local, on-card regulation. The are complete with internal current limiting,
More informationHIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR. Features
General Description The series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output
More information340kHz, 3A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 3A load with high efficiency, excellent line and load regulation.
More informationPeak 3A CMOS LDO Regulator with Enable and Power Good. Features. Notebook PSOP-8. Figure 1. Package Type of AP2132A
General Description The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor, a resistor network for setting
More information2A CMOS LDO Regulator. Features
General Description The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor, a resistor network for setting
More informationAdvance Datasheet. General Description. Features. Applications. High-side Power Distribution Switch with Enable
General Description The is an integrated high-side power switch that consists of TTL compatible enables input, a charge pump, and N-Channel MOSFET. The switch s low RDS (ON), 120mΩ, meets USB voltage drop
More informationData Sheet. General Purpose ITVS, 4 I/Os, C I/O-VSS <0.65pF. Features. General Description. Applications. Pin Configuration
General Description BCD ITVS (Integrated Transient Voltage Suppression) devices are designed and built using BCD proprietary process technology. These devices integrate the various diodes, transistors
More informationData Sheet. Features. General Description. Applications. 1.2A, 1.4MHz High Efficiency Synchronous DC-DC Buck Converter AP3407/A
General Description The AP3407/A is a 1.4MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 1.2A load with high efficiency, excellent line and load
More informationSYNCHRONOUS DC-DC BUCK CONVERTER
General Description The is a 1.1MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 800mA load with high efficiency, excellent line and load regulation.
More informationdiscontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
More informationPreliminary Datasheet. Features. General Description. Applications. Dual 1.1MHz, 800mA Synchronous DC-DC Buck Converter
General Description The contains two independent 1.1MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converters, each of them is capable of driving a 800mA load with high efficiency,
More information150mA RF ULDO REGULATOR General Description. Features
General Description The is a 150mA ULDO regulator which provides very low noise, ultra low dropout voltage (typically 165 at 150mA), very low standby current (1 maximum) and excellent power supply ripple
More informationCoiltronics DRQ Series Dual winding, shielded inductors/transformers
Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM
More informationDual 4-channel Analog Multiplexer/Demultiplexer. Features
General Description The is high-speed si-gate CMOS device. The is dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins
More information1A 3-TERMINAL POSITIVE LINEAR REGULATORS General Description. Features. Applications
General Description The series are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of applications including local, on-card regulation. This series of regulators
More informationCURRENT MODE PWM CONTROLLER General Description. Features
General Description The AP3842C/3C/4C/5C are high performance fixed frequency current-mode PWM controller series. These integrated circuits are optimized for off-line and DC-DC converter applications with
More information500mA LOW NOISE LDO REGULATOR General Description. Features. Applications
General Description The is a 500mA output current fixed voltage regulator which provides low noise, very low dropout voltage (typically 350mV at 500mA), very low standby current ( maximum) and excellent
More informationHCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
More informationFP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
More informationPlanar Transformer Prototyping Kit. Designer s Kit C356
Planar Transformer Prototyping Kit Designer s Kit C Contents Introduction... Kit Contents... Part Details... Core... Primary Boards... Secondary Stamps... Auxiliary Boards... Pins and Insulators... Designing
More informationFP2 Low profile, high current power inductors
Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower
More informationLOW POWER DUAL OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description Features The consist of two independent, high gain and internally frequency compensated operational amplifiers, they are specifically designed to operate from a single power supply.
More informationPOWER FACTOR CORRECTION CONTROLLER General Description. Features
General Description The is an active power factor control IC which is designed mainly for use as pre-converter in electronic ballast, AC-DC adapters and off-line SMPS applications. The includes an internal
More informationHCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
More informationVERSATILE COST EFFECTIVE GREEN PWM CONTROLLER General Description. Features
General Description The is a low startup current, current mode PWM controller with green-mode power-saving operation. The PWM switching frequency at normal operation is externally programmable and is trimmed
More informationLOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS. Features
General Description The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically designed to operate from a single power supply
More informationLOW DROPOUT LINEAR REGULATOR. Features. Applications
General Description The is a low dropout three-terminal regulator. The has been optimized for low voltage where transient response and minimum input voltage are critical. It provides current limit and
More informationHCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
More informationdiscontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
More informationFP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
More information(TPSTX) SMD Compact Power Toroidal Inductors
Version: July 31, 2017 Electronics Tech. (TPSTX) SMD Compact Power Toroidal Inductors Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing
More informationVOLTAGE DETECTOR General Description. Features. Applications
General Description The series ICs are under voltage detectors with a built in voltage threshold and low power consumption. The are specifically designed to accurately monitor power supplies. The use a
More informationFP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
More informationFeatures. Application
General Description The is a single-coil, single-phase motor predriver designed by bipolar process. Its rotation speed can be controlled through an external PWM. This IC requires few external components
More informationSurface Mount Wideband RF
Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)
More information(TCDA) High Current Power Inductors
Version: July 31, 2017 (TCDA) High Current Power Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationDRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data.
Supersedes pril 0 Dual winding, high power density, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels s a transformer: SEPIC,
More informationCommon Mode Chokes BU Series
Document 60- Common Mode Chokes BU Series These low cost, high performance choke coils are designed to virtually eliminate line conducted common mode noise. The BU9S and BU9HS families are ideal for signal
More information1.5MHz, 1.5A, Step-down DC-DC Converter. Features
General Description The is a high efficiency step-down DC-DC voltage converter. The chip operation is optimized by peak-current mode architecture with built-in synchronous power MOSFET switchers. The oscillator
More informationPULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications
General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists of a reference voltage circuit, two error
More information(TC19) Micro Gap Power Toroidal Inductor
Version: February 28, 2017 Electronics Tech. (TC19) Micro Gap Power Toroidal Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing
More informationHT82V Bit Stereo Audio D/A Converter. Features. Applications. General Description. Block Diagram. Pin Assignment
16-Bit Stereo Audio D/A Converter Features Wide supply voltage range: 2.4V~5.5V CMOS technology Low power consumption Two voltage output channel in the same chip 16-bit dynamic range Low total harmonic
More informationHCMA0703 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range
More informationGREEN MODE PWM CONTROLLER General Description. Features. Applications
查询 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 General Description The is a green PWM controller operating in current mode. It is specially designed for off-line AC- DC adapter and battery charger applications where
More informationDRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
More informationAdjustable LTE antenna
Applications Mobile (LTE) devices operating on GSM bands (GSM850, EGSM900, PCN1800, PCS1900), WCDMA 2100, LTE700 and LTE2.6G Features Compact size: Maximum dimensions 50.2 x 18.0 x 6.9 mm3, includes volume
More information(TCDY) High Current Integrated Inductor
Version: July 31, 2017 (TCDY) High Current Integrated Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationFP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
More informationHigh power density, high efficiency, shielded drum core power inductors
Supersedes pril 4 High power density, high efficiency, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels DC-DC converters
More informationHIGH PERFORMANCE POWER FACTOR CORRECTOR. Features
General Description The is an active power factor control IC which is designed mainly for use as a pre-converter in electronic ballast, AC-DC adapter and off-line SMPS applications.. The IC includes an
More informationWHITE LED STEP-UP CONVERTER General Description. Features
General Description The is an inductor-based DC/DC boost converter designed to drive LED arrays. 1.4A switching current allows to be used in different 7' to 10' LCD panel backlights (3*13 LED arrays typically).
More informationHCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
More informationLOW POWER QUAD OPERATIONAL AMPLIFIERS AS324/324A. Features
General Description The AS324/324A consist of four independent, high gain and internally frequency compensated operational amplifiers. They are specifically designed to operate from a single power supply.
More information(TPUTX) SMD Power Wire wound Toroidal Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TPUTX) SMD Power Wire wound Toroidal Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu
More informationDR Series High Power Density, High Efficiency, Shielded Inductors
DR Series High Power Density, High Efficiency, Shielded Inductors Description 5 C maximum total operating temperature Four sizes of shielded drum core inductors Inductance range from.33µh to µh Current
More informationTransformers for Broadband Access
HDSL & SDSL Interface Transformers Line Interface 56kbps Modem Transformer Transformers for Broadband Access SECTION 9 Transformers for Broadband Access TALEMA PROFILE Founded in 1975, The TALEMA International
More informationHT75XX-1 100mA Low Power LDO
100mA Low Power LDO Features Low power consumption Low voltage drop Low temperature coefficient High input voltage (up to 24V) High output current : 100mA (P d 250mW) Output voltage accuracy: tolerance
More information600mA CMOS LDO REGULATOR WITH ENABLE. Features
General Description The is CMOS process low dropout linear regulator with enable function, the regulator delivers a guaranteed 600mA (min.) continuous load current. The provides 1.2, 1.8, 2.5, 2.6, 2.8
More information3.3 VOLT FRAME RATE COMMUNICATIONS PLL MK1574. Features. Description. Block Diagram DATASHEET
DATASHEET 3.3 VOLT FRAME RATE COMMUNICATIONS PLL MK1574 Description The MK1574 is a Phase-Locked Loop (PLL) based clock synthesizer, which accepts an 8 khz clock input as a reference, and generates many
More informationSMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
More information