1A LOW NOISE CMOS LDO REGULATOR WITH ENABLE. Features
|
|
- Diane Sutton
- 6 years ago
- Views:
Transcription
1 General Description The is CMOS process low dropout linear regulator with enable function, the regulator delivers a guaranteed 1A (Min.) continuous load current. The features low power consumption. The is available in 1.2V, 1.8V, 2.5V and 3.3V regulator output, and available in excellent output accuracy 1.5%, it is also available in an excellent load regulation and line regulation performance. The is available in standard packages of SOT-223, TO (1), TO (3), TO-263-3, SOIC-8 and PSOP-8. Features Output Voltage Accuracy: ±1.5% Output Current: 1A (Min.) Fold-back Short Current Protection: ma Low Dropout Voltage (3.3V): 4mV =1A Stable with 4.7µF Flexible Cap: Ceramic, Tantalum and Aluminum Electrolytic Excellent Line Regulation: 0.02%/V (Typ.), 0.1%/V =30mA Excellent Load Regulation: =0A to 1A Low Quiescent Current: 60µA (1.2V/1.8V/ 2.5V) Low Output Noise: 30µVRMS PSRR: Freq=1KHz (1.2V/1.8V) OTSD Protection Operating Temperature Range: -40 C to 85 C ESD: MM 400V, HBM 4000V Applications LCD Monitor LCD TV STB SOT-223 TO TO (1) TO (3) SOIC-8 PSOP-8 Figure 1. Package Types of 1
2 Pin Configuration H Package (SOT-223) S Package (TO-263-3) D Package (TO (1)) (TO (3)) M Package (SOIC-8) MP Package (PSOP-8) Figure 2. Pin Configuration of (Top View) 2
3 Pin Descriptions Pin Number SOT-223, TO-263-3, TO (1) / (3) SOIC-8/PSOP-8 Pin Name Function 1 1, 3, 5, 6, 7, GND Ground 2 2 VOUT Regulated Output 3 4 VIN Input Voltage Pin 8 EN Chip Enable, H normal work, L shutdown output Functional Block Diagram EN (8) Shutdown Logic 3 (4) VIN Thermal Shutdown Foldback Current Limit 3m 2 (2) VOUT V REF GND 1 (1, 3, 5, 6, 7) A (B) A: SOT-223, TO-263-3, TO (1)/(3) B: SOIC-8, PSOP-8 Figure 3. Functional Block Diagram of 3
4 Ordering Information - Circuit Type Package H: SOT-223 D: TO (1)/TO (3) S: TO M: SOIC-8 MP: PSOP-8 G1: Green TR: Tape & Reel 1.2: Fixed Output 1.2V 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 3.3: Fixed Output 3.3V Package Temperature Range SOT to 85 C TO (1)/ TO (3) -40 to 85 C TO to 85 C SOIC-8-40 to 85 C PSOP-8-40 to 85 C Part Number Marking ID Packing Type H-1.2TRG1 GH12C Tape & Reel H-1.8TRG1 GH12D Tape & Reel H-2.5TRG1 GH14C Tape & Reel H-3.3TRG1 GH12E Tape & Reel D-1.2TRG1 D-1.2G1 Tape & Reel D-1.8TRG1 D-1.8G1 Tape & Reel D-2.5TRG1 D-2.5G1 Tape & Reel D-3.3TRG1 D-3.3G1 Tape & Reel S-1.2TRG1 S-1.2G1 Tape & Reel S-1.8TRG1 S-1.8G1 Tape & Reel S-2.5TRG1 S-2.5G1 Tape & Reel S-3.3TRG1 S-3.3G1 Tape & Reel M-1.2TRG1 2114M-1.2G1 Tape & Reel M-1.8TRG1 2114M-1.8G1 Tape & Reel M-2.5TRG1 2114M-2.5G1 Tape & Reel M-3.3TRG1 2114M-3.3G1 Tape & Reel MP-1.2TRG1 2114MP-1.2G1 Tape & Reel MP-1.8TRG1 2114MP-1.8G1 Tape & Reel MP-2.5TRG1 2114MP-2.5G1 Tape & Reel MP-3.3TRG1 2114MP-3.3G1 Tape & Reel BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and Green. 4
5 Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Power Supply Voltage 6.5 V Operating Junction Temperature Range T J 1 ºC Storage Temperature Range T STG -65 to 1 ºC Lead Temperature (Soldering, 10sec) T LEAD 260 ºC ESD (Machine Model) 400 V ESD (Human Body Model) 4000 V Note 1: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit Supply Voltage V Operating Ambient Temperature Range C 5
6 Electrical Characteristics -1.2 Electrical Characteristics (Note 2) ( =2.5V, (Ceramic), (Ceramic), Typical = 25 C, Bold typeface applies over -40 O C 85 O C ranges, unless otherwise specified (Note 3)) Parameter Symbol Test Conditions Min Typ Max Unit Output Voltage V OUT =2.5V, 1mA 30mA V OUT 98.5% 1.2 V OUT 101.5% V Input Voltage 6.0 V Maximum Output Current (MAX) =2.5V, V OUT =1.182V to 1.218V 1 A Load Regulation V OUT /V OUT I OUT =2.5V, 1mA 1A %/A Line Regulation V OUT /V OUT 2.5V V V IN 6V, =30mA 0.02 ±0.1 %/V IN Dropout Voltage V DROP =1.0A mv Quiescent Current I Q =2.5V, =0mA µa Power Supply Rejection Ratio PSRR Ripple 1Vp-p f=100hz 68 =2.5V, =100mA f=1khz 68 db Output Voltage Temperature Coefficient V OUT /V OUT T =30mA, =-40 C to 85 C ±30 ppm/ C Short Current Limit I SHORT V OUT =0V ma RMS Output Noise V NOISE 10Hz f 100kHz (No Load) 30 µv RMS V EN High Voltage V IH Enable logic high, regulator on 1.5 V EN Low Voltage V IL Enable logic low, regulator off 0.4 V Standby Current I STD =3.5V, V EN in OFF mode µa Start-up Time T S No Load 20 µs EN Pull Down Resistor V OUT Discharge Resistor Thermal Temperature Thermal Hysteresis Thermal Resistance (Junction to Case) Shutdown Shutdown RPD 3.0 mω R DCHG Set EN pin at Low 60 Ω T OTSD 160 T HYOTSD 25 θ JC SOIC PSOP SOT TO (1) / TO (3) 35 TO Note 2: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. Note 3: Production testing at =25 C. Over temperature specifications guaranteed by design only. C C /W 6
7 Electrical Characteristics (Continued) -1.8 Electrical Characteristics (Note 2) ( =2.8V, (Ceramic), (Ceramic), Typical = 25 C, Bold typeface applies over -40 O C 85 O C ranges, unless otherwise specified (Note 3)) Parameter Symbol Test Conditions Min Typ Max Unit Output Voltage V OUT =2.8V, 1mA 30mA V OUT 98.5% 1.8 V OUT 101.5% V Maximum Output Current (MAX) =2.8V, V OUT =1.773V to 1.827V 1.0 A Load Regulation Line Regulation V OUT /V OUT I OUT V OUT /V OUT V IN =2.8V, 1mA 1A %/A 2.8V 6V, =30mA 0.02 ±0.1 %/V Dropout Voltage V DROP =1.0A mv Quiescent Current I Q =2.8V, =0mA µa Power Supply Rejection Ratio PSRR Ripple 1Vp-p f=100hz 68 =2.8V, =100mA f=1khz 68 db Output Voltage Temperature Coefficient V OUT /V OUT T =30mA, =-40 C to 85 C ±30 ppm/ C Short Current Limit I SHORT V OUT =0V ma RMS Output Noise V NOISE 10Hz f 100kHz (No load) 30 µv RMS V EN High Voltage V IH Enable logic high, regulator on 1.5 V EN Low Voltage V IL Enable logic low, regulator off 0.4 V Standby Current I STD =3.5V, V EN in OFF mode µa Start-up Time T S No Load 20 µs EN Pull Down Resistor V OUT Discharge Resistor Thermal Temperature Thermal Hysteresis Thermal Resistance (Junction to Case) Shutdown Shutdown RPD 3.0 mω R DCHG Set EN pin at Low 60 Ω T OTSD 160 T HYOTSD 25 θ JC SOIC PSOP SOT TO (1) / TO (3) 35 TO C C /W Note 2: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. Note 3: Production testing at =25 C. Over temperature specifications guaranteed by design only. 7
8 Electrical Characteristics (Continued) -2.5 Electrical Characteristics (Note 2) ( =3.5V, (Ceramic), (Ceramic), Typical = 25 C, Bold typeface applies over -40 O C 85 O C ranges, unless otherwise specified (Note 3)) Parameter Symbol Test Conditions Min Typ Max Unit Output Voltage V OUT =3.5V, 1mA 30mA V OUT 98.5% 2.5 V OUT 101.5% V Maximum Output Current (MAX) =3.5V, V OUT =2.463V to 2.537V 1.0 A Load Regulation Line Regulation V OUT /V OUT I OUT V OUT /V OUT V IN Vout=2.5V, =Vout+1V 1mA 1A %/A 3.5V 6V, =30mA 0.02 ±0.1 %/V Dropout Voltage V DROP =1A 4 7 mv Quiescent Current I Q =3.5V, =0mA µa Power Supply Rejection Ratio Output Voltage Temperature Coefficient PSRR V OUT /V OUT T Ripple 1Vp-p f=100hz 65 =3.5V, =100mA f=1khz 65 =30mA ±30 ppm/ C Short Current Limit I SHORT V OUT =0V ma RMS Output Noise V NOISE 10Hz f 100kHz 30 µv RMS db V EN High Voltage V IH Enable logic high, regulator on 1.5 V EN Low Voltage V IL Enable logic low, regulator off 0.4 V Standby Current I STD =3.5V, V EN in OFF mode µa Start-up Time T S No Load 20 µs EN Pull Down Resistor RPD 3.0 mω V OUT Discharge Resistor R DCHG Set EN pin at Low 60 Ω Thermal Temperature Thermal Hysteresis Thermal Resistance (Junction to Case) Shutdown Shutdown T OTSD 160 T HYOTSD 25 θ JC SOIC PSOP SOT TO (1) / TO (3) 35 TO Note 2: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. Note 3: Production testing at =25 C. Over temperature specifications guaranteed by design only. C C /W 8
9 Electrical Characteristics (Continued) -3.3 Electrical Characteristics (Note 2) ( =4.3V, (Ceramic), (Ceramic), Typical = 25 C, Bold typeface applies over -40 O C 85 O C ranges, unless otherwise specified (Note 3)) Parameter Symbol Test Conditions Min Typ Max Unit Output Voltage V OUT =4.3V, 1mA 30mA V OUT 98.5% 3.3 V OUT 101.5% V Maximum Output Current (MAX) =4.3V, V OUT =3.25V to 3.35V 1.0 A Load Regulation Line Regulation V OUT /V OUT I OUT V OUT /V OUT V IN =4.3V, 1mA 1A %/A 4.3V 6V, =30mA 0.02 ±0.1 %/V Dropout Voltage V DROP =1A 4 7 mv Quiescent Current I Q =4.3V, =0mA µa Power Supply Rejection Ratio Output Voltage Temperature Coefficient PSRR V OUT /V OUT T Ripple 1Vp-p =4.3V, f=100hz 65 =100mA f=1khz 65 =30mA ±30 ppm/ C Short Current Limit I SHORT V OUT =0V ma RMS Output Noise V NOISE 10Hz f 100kHz (No load) 30 µv RMS db V EN High Voltage V IH Enable logic high, regulator on 1.5 V EN Low Voltage V IL Enable logic low, regulator off 0.4 V Standby Current I STD =3.5V, V EN in OFF mode µa Start-up Time T S No Load 20 µs EN Pull Down Resistor RPD 3.0 mω V OUT Discharge Resistor R DCHG Set EN pin at Low 60 Ω Thermal Shutdown Temperature T OTSD 160 Thermal Shutdown Hysteresis T HYOTSD 25 C SOIC PSOP Thermal Resistance (Junction to Case) θ JC SOT C /W TO (1) / TO (3) 35 TO Note 2: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. Note 3: Production testing at =25 C. Over temperature specifications guaranteed by design only. 9
10 Typical Performance Characteristics Ground Current (µa) _1.2V =2.5V =-40 O C =85 O C Ground Current (µa) _1.8V =2.8V =-40 O C =85 O C Output Current (A) Output Current (A) Figure 4. Ground Current vs. Output Current Figure 5. Ground Current vs. Output Current Ground Current (µa) _2.5V =3.5V =-40 O C =85 O C Ground Current (µa) _3.3V =4.3V =-40 O C =85 O C Output Current (A) Output Current (A) Figure 6. Ground Current vs. Output Current Figure 7. Ground Current vs. Output Current 10
11 Typical Performance Characteristics (Continued) Quiescent Current (µa) _1.2V =2.5V =0mA Quiescent Current (µa) _1.8V =2.8V No Load Temperature ( O C) Temperature ( O C) Figure 8. Quiescent Current vs. Temperature Figure 9. Quiescent Current vs. Temperature Quiescent Current (µa) Temperature ( O C) _2.5V =3.5V No Load Quiescent Current (µa) _3.3V =4.3V =0mA Temperature ( O C) Figure 10. Quiescent Current vs. Temperature Figure 11. Quiescent Current vs. Temperature 11
12 Typical Performance Characteristics (Continued) Quiescent Current (µa) _1.2V =0mA = -40 O C = 25 O C = 85 O C Quiescent Current (µa) _1.8V =0mA =25 o C =-40 o C =85 o C Input Voltage (V) Input Voltage (V) Figure 12. Quiescent Current vs. Input Voltage Figure 13. Quiescent Current vs. Input Voltage _2.5V =0mA _3.3V =0mA Quiescent Current (µa) =25 o C =-40 o C =85 o C Quiescent Current (µa) = -40 O C = 25 O C = 85 O C Input Voltage (V) Input Voltage (V) Figure 14. Quiescent Current vs. Input Voltage Figure 15. Quiescent Current vs. Input Voltage 12
13 Typical Performance Characteristics (Continued) Output Voltage (V) _1.2V =2.5V =10mA =100mA =0mA =1000mA Output Voltage (V) =10mA =100mA _1.8V =2.8V =0mA =1000mA Temperature ( O C) Temperature ( O C) Figure 16. Output Voltage vs. Temperature Figure 17. Output Voltage vs. Temperature _3.3V =4.3V Output Voltage (V) _2.5V =3.5V =10mA =100mA =0mA =1000mA Output Voltage (V) =10mA =100mA =0mA =1000mA Temperature ( O C) Temperature ( O C) Figure 18. Output Voltage vs. Temperature Figure 19. Output Voltage vs. Temperature 13
14 Typical Performance Characteristics (Continued) _1.2V Output Voltage (V) =-40 O C =85 O C =10mA Output Voltage (V) _1.8V =-40 o C =25 o C =85 o C =10mA Input Voltage (V) Input Voltage (V) Figure 20. Output Voltage vs. Input Voltage Figure 21. Output Voltage vs. Input Voltage _3.3V Output Voltage (V) _2.5V =10mA =-40 O C =85 O C Output Voltage (V) =-40 O C =85 O C 0.5 =10mA Input Voltage (V) Input Voltage (V) Figure 22. Output Voltage vs. Input Voltage Figure 23. Output Voltage vs. Input Voltage 14
15 Typical Performance Characteristics (Continued) Output Voltage (V) _1.2V =2.5V Output Current (A) =-40 O C =85 O C Output Voltage (V) 1.3 _1.2V =2.5V =3.3V Output Current (A) Figure 24. Output Voltage vs. Output Current Figure 25. Output Voltage vs. Output Current Output Voltage (V) _1.8V =2.8V =-40 O C =85 O C Output Voltage (V) _2.5V =3.5V =-40 O C =85 O C Output Current (A) Output Current (A) Figure 26. Output Voltage vs. Output Current Figure 27. Output Voltage vs. Output Current 15
16 Typical Performance Characteristics (Continued) Output Voltage (V) _3.3V 1.5 =4.3V V 1.0 IN =5V Output Current (A) Output Voltage (V) _3.3V =4.3V =-40 O C =85 O C Output Current (A) Figure 28. Output Voltage vs. Output Current Figure 29. Output Voltage vs. Output Current Dropout Voltage (V) _1.8V =2.8V =-40 O C Dropout Voltage (V) _2.5V =3.5V =-40 O C 0.1 =85 O C =85 O C Output Current (A) Output Current (A) Figure 30. Dropout Voltage vs. Output Current Figure 31. Dropout Voltage vs. Output Current 16
17 Typical Performance Characteristics (Continued) Dropout Voltage (V) =-40 O C =85 O C _3.3V Output Current (A) Max. Output Current (A) _1.2V Input Voltage (V) Figure 32. Dropout Voltage vs. Output Current Figure 33. Max. Output Current vs. Input Voltage Max. Output Current (A) _1.8V V OUT =1.8X(1+1.5%) Max. Output Current (A) _2.5V V OUT =2.5X(1+1.5%) Input Voltage (V) Input Voltage (V) Figure 34. Max. Output Current vs. Input Voltage Figure 35. Max. Output Current vs. Input Voltage 17
18 Typical Performance Characteristics (Continued) Max. Output Current (A) _3.3V Output Short Current (A) _1.2V =2.5V Input Voltage (V) Temperature ( O C) Figure 36. Max. Output Current vs. Input Voltage Figure 37. Output Short Current vs. Temperature Output Short Current (ma) _1.8V =2.8V Output Short Current (ma) _2.5V =3.5V Temperature ( O C) Temperature ( O C) Figure 38. Output Short Current vs. Temperature Figure 39. Output Short Current vs. Temperature 18
19 Typical Performance Characteristics (Continued) _3.3V =4.3V 70 _1.2V Output Short Current (A) Temperature ( O C) PSRR (db) =1µF =10mA Ripple=1Vp-p 100 1k 10k 100k Frequency (Hz) Figure 40. Output Short Current vs. Temperature Figure 41. PSRR vs. Frequency _1.8V _2.5V PSRR (db) =10mA Ripple=1Vp-p PSRR (db) =10mA Ripple=1Vp-p k 10k 100k Frequency (Hz) k 10k 100k Frequency (Hz) Figure 42. PSRR vs. Frequency Figure 43. PSRR vs. Frequency 19
20 Typical Performance Characteristics (Continued) PSRR (db) _3.3V =1µF Ripple=1Vp-p 0mA/div V OUTAC mv/div =10mA =100mA k 10k 100k Frequency (Hz) Figure 44. PSRR vs. Frequency Figure 45. Load Transient 20
21 Typical Application Figure 46. Typical Application of 21
22 Mechanical Dimensions SOT-223 Unit: mm(inch) 6.700(0.264) 7.300(0.287) 3.300(0.130) 3.700(0.146) 22
23 Mechanical Dimensions (Continued) TO (1) Unit: mm(inch) 23
24 Mechanical Dimensions (Continued) TO (3) Unit: mm(inch) 0.900(0.035) 1.2(0.049) 6.0(0.256) 6.700(0.264) 5.130(0.202) 5.460(0.215) 1.29± REF 0.470(0.019) 0.600(0.024) 6.000(0.236) 6.200(0.244) 1.800REF 0.1(0.006) 0.7(0.030) 0.600(0.024) 1.000(0.039) 5.2REF 9.800(0.386) 10.40(0.409) (0.035) 1.100(0.043) 0.720(0.028) 0.900(0.035) 2.286(0.090) BSC (0.028) 0.8(0.033) 2.900REF 1.400(0.055) 1.700(0.067) (0.087) 2.380(0.094) 24
25 Mechanical Dimensions (Continued) TO Unit: mm(inch) 4.070(0.160) 4.820(0.190) (0.340) 9.6(0.380) 2.540(0.100) 9.6(0.380) (0.405) 8.840(0.348) (0.581) (0.620) 1.1(0.045) 1.390(0.055) 0.510(0.020) 0.990(0.039) 2.540(0.100) 1.270(0.0) 1.390(0.055) 2.390(0.094) 2.690(0.106) (0.045) 1.390(0.055) (0.015) 0.020(0.001) 0.2(0.010) 2.640(0.104) 2.700(0.106) 0.360(0.014) 0.400(0.016) (0.087) (0.220) 2.540(0.100) 7.420(0.292) 7.980(0.314) 2.540(0.100) 25
26 Mechanical Dimensions (Continued) SOIC-8 Unit: mm(inch) R0.1(0.006) 26
27 Mechanical Dimensions (Continued) PSOP-8 Unit: mm(inch) 3.202(0.126) 3.402(0.134) 27
28 IMPORTANT NOTICE reserves the right to make changes without further notice to any products or specifications herein. does not assume any responsibility for use of any its products for any particular purpose, nor does assume any liability arising out of the application or use of any its products or circuits. does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD - Headquarters Semiconductor Manufacturing Limited - Wafer BCD FabSemiconductor Manufacturing Limited BCD - Wafer Semiconductor Fab Manufacturing Limited Shanghai - IC Design SIM-BCD Group Semiconductor Manufacturing Co., Ltd. No. Shanghai 1600, Zi SIM-BCD Xing Road, Semiconductor Shanghai ZiZhu Manufacturing Science-based Limited Industrial Park, , China 800 Yi Advanced Shan Road, Analog Shanghai Circuits , (Shanghai) China Corporation Tel: 800, , Yi Shan Road, Shanghai Fax: , China Tel: F, Zone B, 900, 1491, Yi Fax: Shan Road, Shanghai , China Tel: , Fax: Tel: , Fax: REGIONAL SALES OFFICE REGIONAL Shenzhen OfficeSALES OFFICE Shenzhen Shanghai SIM-BCD Office Semiconductor Manufacturing Co., Ltd., Shenzhen Office Shanghai Unit A Room SIM-BCD 1203, Skyworth Semiconductor Bldg., Gaoxin Manufacturing Ave.1.S., Nanshan Co., Ltd. District, Shenzhen Shenzhen, Office Advanced China Analog Circuits (Shanghai) Corporation Shenzhen Office Taiwan Office BCD Taiwan Semiconductor Office (Taiwan) Company Limited 4F, 298-1, BCD Rui Semiconductor Guang Road, (Taiwan) Nei-Hu District, Company Taipei, Limited Taiwan 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, USA Office USA BCD Office Semiconductor Corp. BCD Semiconductor Huntwood Ave. Corporation Hayward, CA 94544, Huntwood USA Ave. Hayward, Room Tel: E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen , China Tel: Taiwan 2808 CA Tel : 94544, U.S.A Tel: Fax: Fax: Fax: Tel: Fax: Tel Fax: : Fax:
600mA CMOS LDO REGULATOR WITH ENABLE. Features
General Description The is CMOS process low dropout linear regulator with enable function, the regulator delivers a guaranteed 600mA (min.) continuous load current. The provides 1.2, 1.8, 2.5, 2.6, 2.8
More informationPeak 3A CMOS LDO Regulator with Enable and Power Good. Features. Notebook PSOP-8. Figure 1. Package Type of AP2132A
General Description The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor, a resistor network for setting
More information2A CMOS LDO Regulator. Features
General Description The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor, a resistor network for setting
More information500mA LOW NOISE LDO REGULATOR General Description. Features. Applications
General Description The is a 500mA output current fixed voltage regulator which provides low noise, very low dropout voltage (typically 350mV at 500mA), very low standby current ( maximum) and excellent
More information1A 3-TERMINAL POSITIVE VOLTAGE REGULATOR General Description. Features. Applications
General Description The series are three terminal positive voltage regulators designed for a wide variety of applications including local, on-card regulation. The are complete with internal current limiting,
More information600mA LOW DROPOUT LINEAR REGULATOR 600mA ULDO REGULATOR WITH ENABLE. Features. Applications
General Description The is a series of ultra low dropout regulators optimized for low voltage applications where transient response and minimum input voltage are critical. The provides current limit and
More information150mA RF ULDO REGULATOR General Description. Features
General Description The is a 150mA ULDO regulator which provides very low noise, ultra low dropout voltage (typically 165 at 150mA), very low standby current (1 maximum) and excellent power supply ripple
More informationPin Configuration T Package (TO-220-) S/SA Package (TO-26-) S SA 2 1 GND 2 1 GND 2 1 GND DA Package (TO-252-2(1)) (TO-252-2(2)) 2 GND 2 GND 1 1 (TO-25
General Description The AZ9150 is low dropout three-terminal regulator with a typical dropout of 75mV at 1.5A output current. The AZ9150 provides current limit and thermal shutdown. On-chip thermal shutdown
More information100mA REGULATED CHARGE PUMP General Description. Features. Applications
General Description The are regulated step-up DC/DC converters based on charge pump technique. These ICs have the ability to supply 100mA constant output current or 250mA peak output current for 100ms
More informationHIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR. Features
General Description The series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output
More informationAdvance Datasheet. General Description. Features. Applications. High-side Power Distribution Switch with Enable
General Description The is an integrated high-side power switch that consists of TTL compatible enables input, a charge pump, and N-Channel MOSFET. The switch s low RDS (ON), 120mΩ, meets USB voltage drop
More informationData Sheet. Features. General Description. Applications. 1.2A, 1.4MHz High Efficiency Synchronous DC-DC Buck Converter AP3407/A
General Description The AP3407/A is a 1.4MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 1.2A load with high efficiency, excellent line and load
More informationCONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER General Description. Features. Applications
General Description The is a highly integrated solution for a constant voltage/constant current mode SMPS application. The contains one 1.21V voltage reference with ±1% accuracy, one current sensing circuit
More information340kHz, 2A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation.
More informationPreliminary Datasheet. Features. General Description. Applications. Dual 1.1MHz, 800mA Synchronous DC-DC Buck Converter
General Description The contains two independent 1.1MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converters, each of them is capable of driving a 800mA load with high efficiency,
More informationDUAL BIPOLAR OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description The consists of two high performance operational amplifiers. The IC features high gain, low equivalent input noise voltage, high input resistance, excellent channel separation, wide
More informationLOW DROPOUT LINEAR REGULATOR. Features. Applications
General Description The is a low dropout three-terminal regulator. The has been optimized for low voltage where transient response and minimum input voltage are critical. It provides current limit and
More information340kHz, 2A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation.
More information340kHz, 3A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 3A load with high efficiency, excellent line and load regulation.
More information1A 3-TERMINAL POSITIVE LINEAR REGULATORS General Description. Features. Applications
General Description The series are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of applications including local, on-card regulation. This series of regulators
More information1.5MHz STEP-UP DC-DC CONVERTER General Description. Features. Applications
General Description The is a high power, constant frequency, current mode PWM, inductor based, step-up (boost) converter. The converter operates at high frequency (1.5MHz) so that a small, low profile
More informationSYNCHRONOUS DC-DC BUCK CONVERTER
General Description The is a 1.1MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 800mA load with high efficiency, excellent line and load regulation.
More informationBIPOLAR HALL-EFFECT POSITION SENSORS
General Description The is an integrated Hall-effect latched sensor designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic
More informationSINGLE PHASE HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with H- bridged output driver designed for brushless DC motor applications. The device includes an on-chip Hall sensor for magnetic sensing, an amplifier
More information150kHz 3A BUCK DC-DC CONVERTER General Description. Features. Applications
General Description The series of regulators are fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a A load with excellent line and load regulation. These regulators include internal
More informationVOLTAGE DETECTOR General Description. Features. Applications
General Description The series ICs are under voltage detectors with a built in voltage threshold and low power consumption. The are specifically designed to accurately monitor power supplies. The use a
More information150mA RF ULDO REGULATOR WITH ERROR FLAG General Description. Features
General Description The is a 150mA ULDO regulator, which provides ultra low dropout voltage (typically 165mV at 150mA), very low quiescent current (1 maximum) in shutdown mode and excellent power supply
More informationData Sheet. Features. General Description. Applications. Single Stage Primary Side Regulation PFC Controller For LED Driver
General Description The is a high performance AC/DC universal input Primary Side Regulation Power Factor Controller for LED driver applications. The device uses Pulse Frequency Modulation (PFM) technology
More information1.5MHz, 1.5A, Step-down DC-DC Converter. Features
General Description The is a high efficiency step-down DC-DC voltage converter. The chip operation is optimized by peak-current mode architecture with built-in synchronous power MOSFET switchers. The oscillator
More informationADJUSTABLE PRECISION SHUNT REGULATORS General Description. Features. Applications
General Description Features The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature
More informationAZ386 General Description. Features. Applications
General Description The is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 0 to keep external part count low, but the addition of an external resistor
More informationData Sheet. General Purpose ITVS, 4 I/Os, C I/O-VSS <0.65pF. Features. General Description. Applications. Pin Configuration
General Description BCD ITVS (Integrated Transient Voltage Suppression) devices are designed and built using BCD proprietary process technology. These devices integrate the various diodes, transistors
More informationDual 4-channel Analog Multiplexer/Demultiplexer. Features
General Description The is high-speed si-gate CMOS device. The is dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins
More informationPULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications
General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists of a reference voltage circuit, two error
More informationWHITE LED STEP-UP CONVERTER General Description. Features. Applications
General Description The is an inductor-based DC/DC converter designed to drive up to six white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain satisfied
More informationLOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS. Features
General Description The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically designed to operate from a single power supply
More information5A LOW DROPOUT LINEAR REGULATOR. Features. Applications
General Description The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting which provides protection
More informationFeatures. Applications
General Description The is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous
More informationLOW POWER DUAL OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description Features The consist of two independent, high gain and internally frequency compensated operational amplifiers, they are specifically designed to operate from a single power supply.
More informationPULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications
General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists of a reference voltage circuit, two error
More informationWHITE LED STEP-UP CONVERTER General Description. Features
General Description The is an inductor-based DC/DC boost converter designed to drive LED arrays. 1.4A switching current allows to be used in different 7' to 10' LCD panel backlights (3*13 LED arrays typically).
More informationLOW POWER QUAD OPERATIONAL AMPLIFIERS AS324/324A. Features
General Description The AS324/324A consist of four independent, high gain and internally frequency compensated operational amplifiers. They are specifically designed to operate from a single power supply.
More informationBoost Type LED Driver with 12-Channel Current Source. Features
General Description The is a high efficiency boost controller with 12-string current sources for driving WLED backlight. It operates over a wide input voltage range from 4.5V to 33V. The current of 12
More informationDual 1A, 1.5MHz PWM Step-down DC-DC Converter with OVP. Features WDFN Figure 1. Package Type of AUR9717
General Description The is a high efficiency step-down DC-DC voltage converter. The chip operation is optimized using constant frequency, peak-current mode architecture with built-in synchronous power
More informationPOWER FACTOR CORRECTION CONTROLLER General Description. Features
General Description The is an active power factor control IC which is designed mainly for use as pre-converter in electronic ballast, AC-DC adapters and off-line SMPS applications. The includes an internal
More informationVERSATILE COST EFFECTIVE GREEN PWM CONTROLLER General Description. Features
General Description The is a low startup current, current mode PWM controller with green-mode power-saving operation. The PWM switching frequency at normal operation is externally programmable and is trimmed
More informationHIGH PERFORMANCE POWER FACTOR CORRECTOR. Features
General Description The is an active power factor control IC which is designed mainly for use as a pre-converter in electronic ballast, AC-DC adapter and off-line SMPS applications.. The IC includes an
More informationFeatures. Application
General Description The is a single-coil, single-phase motor predriver designed by bipolar process. Its rotation speed can be controlled through an external PWM. This IC requires few external components
More informationADJUSTABLE PRECISION SHUNT REGULATORS General Description. Features. Applications
General Description The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range. These ICs feature sharp turn-on characteristics, low temperature
More informationPrimary Side Power Switcher for Off-line SMPS. Features
General Description The consists of a primary side regulation controller and a high voltage transistor, and is specially designed for off-line power supplies within 4W output power. Typical applications
More informationOBSOLETE - PART DISCONTINUED
General Description The series consists of two independent precision voltage comparators with an offset voltage specification as low as 1mV. The input common mode voltage range of these comparators includes
More informationCURRENT MODE PWM CONTROLLER General Description. Features
General Description The AP3842C/3C/4C/5C are high performance fixed frequency current-mode PWM controller series. These integrated circuits are optimized for off-line and DC-DC converter applications with
More informationDual High-efficiency PWM Step-down DC-DC Converter. Features
General Description The is a high efficiency step-down DC-DC voltage converter. The chip operation is optimized using constant frequency, peak-current mode architecture with built-in synchronous power
More informationDUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
More informationAP2132. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated 2A CMOS LDO REGULATOR AP2132.
2A CMOS LDO REGULATOR Description Pin Assignments The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor,
More information(Top View) operation modes for setting the output voltage. Fixed output voltage mode senses the output voltage on V OUT, adjustable output voltage
300mA HIGH SPEED, EXTREMELY LOW NOISE CMOS LDO REGULATOR Description Pin Assignments The is a 300mA, positive Voltage regulator ICs fabricated by CMOS process. The provides two kinds of output voltage
More informationGREEN MODE PWM CONTROLLER General Description. Features. Applications
查询 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 General Description The is a green PWM controller operating in current mode. It is specially designed for off-line AC- DC adapter and battery charger applications where
More informationNovember 2011 Rev FEATURES. Fig. 1: XRP6272 Application Diagram
November 2011 Rev. 1.2.0 GENERAL DESCRIPTION The XRP6272 is a low dropout voltage regulator capable of a constant output current up to 2 Amps. A wide 1.8V to 6V input voltage range allows for single supply
More informationGPS,DSC,MP4,PDA,DVD Camera Notebook Data communication GND COUT. SOT23-5L ACP1217A ACP1217B Name Descriptions. 1 3 VIN Input voltage.
GENERAL DESCRIPTION The series are positive voltage regulator fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output voltage,
More informationWL2803E WL2803E. Descriptions. Features. Order Information. Applications. Ultra low dropout, 500mA, CMOS LDO.
Ultra low dropout, 500mA, CMOS LDO Http://www.sh-willsemi.com Descriptions The series are ultra low dropout, Low quiescent current, high PSRR CMOS LDO. The dropout voltage is 130mV (Typ.) at 500mA load
More informationACP1216. Low Dropout Positive Voltage Regulator GENERAL DESCRIPTION FEATURES APPLICATION CIRCUIT APPLICATION PIN CONFIGURATION ACP1216
GENERAL DESCRIPTION The series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output
More informationRT mA Dual LDO Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW) Marking Information
RT9055 300mA Dual LDO Regulator General Description The RT9055 is a dual channel, low noise, and low dropout regulator sourcing up to 300mA at each channel. The output voltage range is from 0.9V to 3.5V
More informationWL2803E WL2803E. Descriptions. Features. Order Information. Applications. Ultra low dropout, 500mA, CMOS LDO.
Ultra low dropout, 500mA, CMOS LDO Http://www.sh-willsemi.com Descriptions The series are ultra low dropout, Low quiescent current, high PSRR CMOS LDO. The dropout voltage is 130mV (Typ.) at 500mA load
More informationLow Noise 300mA LDO Regulator General Description. Features
Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio
More informationAME. High PSRR, Low Noise, 150mA CMOS Regulator AME8852. n General Description. n Typical Application. n Features. n Functional Block Diagram
8852 n General Description High PSRR, Low Noise, 15mA n Typical Application The 8852 family of positive, CMOS linear regulators provide low dropout voltage(11mv@15ma), low quiescent current, and low noise
More information100mA 3-Terminal Positive Voltage Regulator
Solved by SP78LXX TM 100mA -Terminal Positive Voltage Regulator Features SOT-8 Package Output Current up to 100 ma Fixed Output Voltage of 5V and 1V Output Voltage Tolerances of 5% over the Full Temperature
More informationAME. General Description. Functional Block Diagram. Features. Typical Application. Applications
8850 General Description Functional Block Diagram The 8850 family of positive, linear regulators feature low quiescent current (30µA Typ.) with low dropout voltage, making them ideal for battery applications.
More informationid id mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator Features General Description Applications
500mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator General Description The is a 500mA, low dropout and low noise linear regulator with high ripple rejection ratio. It has fixed
More information150mA Ultra Low Dropout Positive Voltage Regulator LM2204N General Description. Features. Applications
150mA Ultra Low Dropout Positive Voltage Regulator 150mA Ultra Low Dropout Positive Voltage Regulator General Description is a positive voltage regulator IC fabricated by high voltage EPNP process. SOT-23-5
More informationRT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9193 is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9193 performance
More informationAME. 600mA CMOS LDO AME8810. General Description. Functional Block Diagram. Features
General Description Functional Block Diagram The of positive, linear regulators feature low quiescent current (30µA typ.) with low dropout voltage, making them ideal for battery applications. The spacesaving
More informationGND GND VIN VOUT. Applications
300mA HIGH SPEED, EXTREMELY LOW NOISE CMOS LDO REGULATOR Description The Series are positive voltage regulator ICs fabricated by CMOS process. Pin Assignments (Top View) (Top View) The Series have features
More informationFeatures. Applications
5A LOW DROPOUT LINEAR REGULATOR Description Features The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting
More informationAME. Low Dropout 1A CMOS Regulator AME8827. General Description. Typical Application. Features. Function Block Diagram. Applications AME8827
General Description The family of positive, CMOS linear regulators and provide low dropout voltage (340mV @ 1A) and excellent PSRR, thus making them ideal for power-saving systems. These rugged devices
More informationid9309 Ultra-Low Noise Ultra-Fast 300mA LDO Regulator Features
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The id9309 is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It has fixed
More information150mA, Micropower, Low Dropout Linear Regulator UM3730DA-xx DFN UM3730P-xx SOT353
150mA, Micropower, Low Dropout Linear Regulator UM3730DA-xx DFN4 1.0 1.0 UM3730P-xx SOT353 General Description The UM3730 series are low dropout linear regulators designed for low power portable applications.
More informationRT9187C. 600mA, Ultra-Low Dropout, CMOS Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW)
600mA, Ultra-Low Dropout, CMOS Regulator General Description The is a high-performance, 600mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable RF and wireless
More informationAP7384. Description. Pin Assignments. Features NEW PRODUCT. Applications. Typical Applications Circuit. WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR
WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
More informationFeatures. Applications
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description The series is a positive voltage regulator IC fabricated by high voltage EPNP process. The has features of wide input voltage range, high accuracy,
More informationAZ1085C. Features. Description. Applications. Pin Assignments. A Product Line of. Diodes Incorporated 3A LOW DROPOUT LINEAR REGULATOR AZ1085C INPUT
A LOW DROPOUT LINEAR REGULATOR Description Features The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at A of load current. The series features on-chip thermal shutdown.
More informationRT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and space requirements. The performance is optimized
More informationBattery-powered Equipment Laptop, Palmtops, Notebook Computers Portable Information Appliances SOT25 (WR Package)
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
More informationRT mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator. General Description. Features. Applications. Ordering Information
Applications Digital Still Camera CDMA/GSM Cellular Handsets Portable Information Appliances Laptop, Palmtops, Notebook Computers Mini PCI & PCI-Express Cards PCMCIA & New Cards Pin Configurations RT92
More informationAT5210 FEATURES DESCRIPTION APPLICATION. 150mA High PSRR LDO. AT X.X KE R Shipping: IAT R: Tape & Reel Circuit Type. Immense Advance Tech.
FEATURES DESCRIPTION V IN Range: 2.0V to 6.0V Low Dropout Voltage: 0.22V (Typ) (V OUT = 3.3V, I OUT = 150mA) Output Current: 150mA High Ripple Rejection: 75dB (Typ)(f= 1kHz) Excellent Line Regulation:
More informationRT9198/A. 300mA, Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Ordering Information RT9198/A- Features. Marking Information
RT9198/A 3mA, Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9198/A is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9198/A
More informationSPX mA Low-Noise LDO Voltage Regulator GENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL APPLICATION DIAGRAM
July 2018 Rev. 2.0.4 GENERAL DESCRIPTION The is a positive voltage regulator with a low dropout voltage and low noise output. In addition, this device offers a very low ground current of 800μA at 100mA
More informationAP2138/2139. Features. Description ADVANCED INFORMATION. Applications. Pin Assignments ULTRA LOW QUIESCENT CURRENT CMOS LDO AP2138/2139 GND V OUT V IN
ULTRA LOW QUIESCENT CURRENT CMOS LDO Description The series are CMOS-based positive voltage regulator ICs. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for
More informationRT9043- High PSRR, Low Dropout, 400mA Adjustable LDO Regulator. Features. General Description. Applications. Ordering Information. Pin Configurations
High PSRR, Low Dropout, 400mA Adjustable LDO Regulator General Description The RT9043 is a high-performance, 400mA LDO regulator, offering high PSRR and low dropout. The quiescent current is as low as
More information150mA, Low-Noise LDO Voltage Regulator
150mA, Low-Noise LDO Voltage Regulator FEATURES Low Noise Output LDO: 40µV RMS Possible 1% Initial Accuracy Very Low Quiecent Current: 70µA Low Dropout Voltage (210mV at 150mA) Current and Thermal Limiting
More informationRT9187B. 600mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information RT9187B
6mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator General Description The is a high-performance, 6mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable
More information500mA CMOS Ultra Low Dropout Linear Regulator
500mA CMOS Ultra Low Dropout Linear Regulator Description The series are 500mA CMOS ultra low dropout positive voltage regulators which operate from 2.4V to 5.5V input supply. The ultra low dropout linear
More informationRT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description.
Applications CDMA/GSM Cellular Handsets Portable Information Appliances Laptop, Palmtops, Notebook Computers Hand-Held Instruments Mini PCI & PCI-Express Cards PCMCIA & New Cards RT9030 150mA, Low Input
More informationAME 1.5A CMOS LDO AME8816. n Typical Application. n General Description. n Functional Block Diagram. n Features. n Applications
n General Description n Typical Application The family of positive, linear regulators feature low quiescent current (45µA typ.) with low dropout voltage, making them ideal for battery applications. IN
More informationMP20249 Dual, Ultra-Low Noise, High PSRR 200mA Linear Regulator
The Future of Analog IC Technology DESCRIPTION The MP2249 is a dual-channel, ultra-low noise, low dropout and high PSRR linear regulator. Fixed output voltage options are available between 1.2V to 3.3V
More information300mA High PSRR Low Dropout Voltage Linear Regulators
300mA High PSRR Low Dropout Voltage Linear Regulators Product Description The is a low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. is available in two
More informationRT mA, 0.5% Accuracy Low Dropout, Ultra Low Noise Voltage Regulator. Features. General Description. Applications. Ordering Information
3mA,.5% Accuracy Low Dropout, Ultra Low Noise Voltage Regulator General Description The RT95 is a high-performance, 3mA LDO regulator, offering extremely high PSRR and ultra-low dropout. The RT95 is Ideal
More informationFast Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator
Fast Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator General Description The features ultra-high power supply rejection ratio, low output voltage noise, low dropout voltage, low quiescent current
More information0.8A STEP-DOWN/STEP-UP/INVERTING DC-DC CONVERTER AZ34063 General Description. Features. Applications
General Description The AZ34063 is a monolithic switching regulator control circuit containing the primary functions required for DC-DC converters. This device consists of internal temperature compensated
More informationHigh-PSRR, Low-Noise, Low-Dropout, 300mA CMOS Linear Regulator. Features. Typical Application Diagram Typical Performance Characteristics.
High-PSRR, Low-Noise, Low-Dropout, 300mA CMOS Linear Regulator General Description The series is a family of dual-channel CMOS linear regulators featuring ultra-high power supply rejection ratio (PSRR),
More informationUltra-Low Noise Ultra-Fast 300mA LDO Regulator. Features
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It offers 1% initial
More information