Cascade Sensor (Intel SR2500 2U Platform) Replacement Unit Assembly Instructions

Transcription

1 Cascade Sensor (Intel SR2500 2U Platform) Replacement Unit Assembly Instructions Riverbed Technology, Inc. 199 Fremont Street San Francisco, CA Phone Fax These instructions describe how to assemble a replacement unit for a Cascade Sensor model that uses the Intel SR2500 2U platform. Assembly involves installing PCI cards (network interface card(s) and an application fingerprinting card, depending on the model) in a replacement Cascade appliance. Unpack and inspect components 1. Unpack the contents of the shipping cartons and identify the following components: RG H7 F100 or CAG F1, depending on model (Cascade Gateway Universal Spare) Network Interface Card(s). Please see the chart below. LCPX1300 (or DPI CAS) App Layer 7 Application Fingerprinting Card ADRACTRIS PCI X riser adapter, if applicable Software Installation CD/DVD 2. Visually inspect each component for indications of damage. 3. If any components are damaged or missing, contact Riverbed Technical Support before continuing. Phone United States and Canada: Phone outside U.S. and Canada: support@riverbed.com Web: Product Code Part # PWLA8490LX ADRACTRIS EXPI9402PF EXPI9402PT EXPI9404PTL PXLA8591SR EXPX9501AFXLR Intel Pro/ 1000 XF Intel Pro/1000 PWLA8490LX PF Dual Port Intel Pro/1000 Intel Pro/ Port Intel SR2500 EXPI9402PF PT Dual Port PT Quad Port Intel 10G 1 Intel 10G 1 Port Multimode ADRACTRIS 2 Port EXPI9402PT EXPI9404PTL Port Server Server Adapter Fiber PCI X PCI X Riser Multimode 2 Port Copper 4 Port Copper Adapter PCIe Item NIC Adapter Fiber PCIe NIC PCIe NIC PCIe NIC PXLA8591SR EXPX9501AFXLR P S4514 A 1 1 P S4524 A 1 2 P S4542 A 2 P S4724 A 1 2 P S4724 V3 1 2 P S4742 A 2 1

2 P S4742 V3 2 Sensor H7 1C Sensor H7 1C Sensor H7 210GMM 1 2 Sensor H7 210GMM 1 2 Sensor H7 210GSM 2 Sensor H7 2C 1 Sensor H7 2C 1 Sensor H7 4C 1 Sensor H7 4C 1 Sensor H7 4MM 2 CAS TX 1 CAS LX 2 1 CAS SX 1 CAS TX 1 CAS SX 2 CAS SR 1 2 CAS LR 2 Overview of procedure The steps for assembling the replacement unit are: 1. Install the App Application Fingerprinting Card and Network Interface Card(s) in the replacement unit. 2. Install the Sensor software. 3. Test and label the monitor ports. (Optional) 4. Verify the installation. 2

3 Install the Application Fingerprinting Card and Network Interface Card(s) 1. Remove locking screw from top cover of the replacement unit chassis. 2. With your left thumb press down on the blue release button while using your right palm on the blue hand grip to push cover back to open. Remove the cover from the unit. 3

4 3. Gently lift both locking handles to remove the PCI riser assembly. 4. Lift the PCI riser assembly from the unit and remove the covers of the PCI slots that will be used. A 2 port Sensor requires Slots 2 and 4. A 4 port Sensor requires Slots 2, 4, and 6. 4

5 5. Please note: Steps 5 and 6 apply to the following units only: P S4514 A P S4524 A P S4724 A P S4724 V3 Sensor H7 210GMM Sensor H7 210GMM CAS LX CAS SR If you are building a model not listed above, please skip ahead to Step 7. On the full height side of the PCI riser assembly, push down on the blue lever and slide the PCIe riser adapter to the left until it can be removed. 5

6 6. Install the ADRACTRIS PCI X riser adapter and verify that it is locked in place by the blue lever. 7. Install the LCPX1300 (or DPI CAS) App Application Upgrade Card into the lower full height PCI X slot. 8. Install a full height Network Interface Card into the center full height PCI slot. 9. If applicable, install a full height Network Interface Card into the top full height PCI slot. This step does not apply to the following models: P S4514 A Sensor H7 2C Sensor H7 2C Sensor H7 4C Sensor H7 4C CAX TX CAX TX 10. Verify that all PCI cards are securely inserted into the PCI slots. 11. Align the three hooks (marked by red squares below) on the rear of the PCI riser assembly with the slots on the rear of the chassis. Press down gently on the PCI riser assembly until the four hooks engage the chassis back panel slots and the assembly is fully seated. 6

7 12. Reinstall the lid on the chassis and secure it with the locking screw. 13. Reinstall the chassis in the rack and reconnect the power, KVM and network cables. Install the Sensor software To install the software, boot from the DVD, log in, configure the software, and reboot the machine, as follows: 1. Insert the install CD/DVD into the machine. 2. Restart the machine to boot from the CD/DVD. A "boot:" prompt may appear. Some software versions may require you to type install and press ENTER. The unit will reboot automatically once the installation is complete. This should take about 15 minutes. 3. Log into the unit using the following login and password: Login: root Password: bb!nmp4y 7

8 4. Configure the software based on the product code of the unit. Refer to the table below to correlate the product code with the configuration code to enter in the configuration command as follows: /usr/mazu/bin/mazu-config <configuration_code> For example, to configure a P S4514 A, enter: /usr/mazu/bin/mazu-config P-S4514-A Configuration Code Product Code Profiler Profiler Profiler Profiler Profiler Sensor H7 110GMM Sensor H7 110GMM P S4514 A P S4514 A P S4514 A P S4514 A Sensor H6 210GMM Sensor H6 210GMM P S4524 A P S4524 A P S4524 A P S4524 A Sensor H6 4MM Sensor H6 4MM P S4542 A P S4542 A P S4542 A P S4542 A Sensor H6 210GMM Sensor H6 210GMM P S4724 A P S4724 A P S4724 A P S4724 A Sensor H6 210GMM Sensor H6 210GMM P S4724 V3 Unsupported Unsupported Unsupported Sensor H6 4MM Sensor H6 4MM P S4742 A P S4742 A P S4742 A P S4742 A Sensor H6 4MM Sensor H6 4MM P S4742 V3 Unsupported Unsupported Unsupported Sensor H7 1C Unsupported Unsupported Unsupported Sensor H7 1C Sensor H7 1C Sensor H7 1C Unsupported Unsupported Unsupported Sensor H7 1C Sensor H7 1C Sensor H7 210GMM Unsupported Unsupported Unsupported Sensor H7 210GMM Sensor H7 210GMM Sensor H7 210GMM Unsupported Unsupported Unsupported Sensor H7 210GMM Sensor H7 210GMM Sensor H7 210GSM Unsupported Unsupported Unsupported Sensor H7 210GSM Sensor H7 210GSM Sensor H7 2C Unsupported Unsupported Unsupported Sensor H7 2C Sensor H7 2C Sensor H7 2C Unsupported Unsupported Unsupported Sensor H7 2C Sensor H7 2C Sensor H7 4C Unsupported Unsupported Unsupported Sensor H7 4C Sensor H7 4C Sensor H7 4C Unsupported Unsupported Unsupported Sensor H7 4C Sensor H7 4C Sensor H7 4MM Unsupported Unsupported Unsupported CAS TX Unsupported Unsupported Unsupported CAS LX Unsupported Unsupported Unsupported CAS SX Unsupported Unsupported Unsupported CAS TX Unsupported Unsupported Unsupported CAS SX Unsupported Unsupported Unsupported CAS SR Unsupported Unsupported Unsupported Sensor H7 4MM Sensor H7 2C Perf Sensor H7 2SM Perf Sensor H7 2MM Perf Sensor H7 4C Perf Sensor H7 4MM Perf Sensor H7 210GMM Perf Sensor H7 4MM CAS TX CAS LX CAS SX CAS TX CAS SX CAS SR CAS LR Unsupported Unsupported Unsupported Unsupported CAS LR 8

9 5. Enter the following command to finalize the configuration: /usr/mazu/bin/mazu-linux --rebuild-box 6. Reboot the system by entering: shutdown r now Test and label the monitor ports (Optional) After you have installed the software, you may wish to test the monitor ports and label them for future reference. The port number sequence may vary by unit and port type. You can identify and test the monitor ports as follows: 1. Connect one of the monitor ports to a port on your switch or tap. 2. Use the command line interface to run the dmesg command. 3. The command returns a message that is several lines long. The last line indicates which port is currently connected. For example, e1000: Mon1: e1000_watchdog_1: NIC Link is up 100 Mbps Half Duplex Flow Control: None 4. Label the port Mon0 or Mon1, as applicable. 5. Disconnect this port and connect the next one. 6. Repeat these steps to label the second monitor port. Verification Verify that the software was installed and configured successfully. 1. Configure the LAN adaptor on your test PC or laptop as follows: IP: Netmask: Gateway:

10 2. Using Firefox or Internet Explorer 7 (or later), verify that a login window can be viewed at the following URL: Login: admin Password: admin Please contact Riverbed Technical Support for software installation instructions for versions after