Mounting instruction Ceiling projection kit P2828 / MKT-S195
|
|
- Gary Watkins
- 5 years ago
- Views:
Transcription
1 Mounting instruction Ceiling projection kit P2828 / MKT-S195
2 What is needed for a good installation? Mirror-Kit Projector mount Use the correct tools for a proper installation.
3 1. Install the Mirror-Kit to the ceiling. Suspend it a bit from the ceiling to gain extra adjustment for levelling out to the ceiling. When the unit muts be installed a large distance from the constructional ceiling do not use windings longer than mm. This to keep maximum projection stability. 2. Remove the projector mount unit from the Mirror-Kit and install the projector with the extra ordered projector mount using 4 M6 bolts. Line-out the lens of the projector with the middle of the unit!!
4 3. Position the projector in the Mirror-Kit while checking the internal height of the Mirror- Kit. The product height can be modified by changing the position of the 2 product pieces. 4. When the unit is in place and eprojector installed, the position of the image can be adjusted bij sliding the projector forward so that the lens is aprox. 15 mm away from the top of the first small mirror. Angle both mirrors to 45 degrees and start adjusting the image from that point. Be aware the a mirror system can only project the image just below the false ceiling. Shifting down the image may result in a key-stone image and must be digitally corrected.
5 5. The cut out for the ceiling finishing frame can be determined by the projected image on top of the ceiling. Take the measurements of the frame to determine the cut-out.
6 6. Installing the P3423 accessory When a building has a lot of vibrations in the ceiling due to installed airco s or doors mechanically connected to the ceiling option P3423 can be installed. This item has a stronger mirror holder that will take away most of the visible vibrations. Remove the mirror with a wet thin sharp knife. Cut between the mirror plate and the mirror. When the mirror is attached also in the middle rotate the mirror a bit to loosen the tape. Clean the mirror plate and remove it from the mirror holder. Replace the new holder and re-install it to the unit. The adustment features are equal to the standard model.
7 Audipack's general conditions of sales and delivery apply to all of Audipack's deliveries. These conditions can be downloaded from Audipack's website, or will be sent by post on request. Audipack liefert ausschließlich unter die allgemeine Verkauf- und Lieferungsbedingungen von Audipack. Diese Bedingungen sind zum downloaden verfügbar auf die Webseite von Audipack, oder werden Ihnen auf Anfrage per Post gesendet. Alle leveringen geschieden uitsluitend volgens de Algemene Verkoop- en Leveringsvoorwaarden van Audipack. Een afschrift hiervan kunt u downloaden van de website van Audipack, of wordt u op aanvraag gestuurd per post. Les conditions de vente et de livraison de Audipack s'appliquent à tous les livraisons de Audipack. Cette conditions sont disponible sur le site internet de Audipack, où seront envoyé par poste sur demande. AUDIPACK Industriestraat GT Moerkapelle the Netherlands Tel: +31(0) Fax: +31(0) audipack@audipack.com Audipack reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such damages.
Mirror Kit Wide Screen
Mirror Kit Wide Screen MKT-150WS / MKT-200WS MKT-250WS / MKT-265WS Mounting instructions Safety instructions: Check the unit for damages caused by transport. In case of damage please report directly to
More informationB (bottom) Package type descriptive code. VFBGA176 Package style descriptive code
VFBGA176, plastic, very thin fine-pitch ball grid array; 176 balls; 0.5 mm pitch; 9 mm x 9 mm x 0.86 mm 30 July 2018 Package information 1 Package summary Terminal position code B (bottom) Package type
More informationInstallation Instructions
TECH SUPPORT The Watt Stopper, Inc. 2800 De La Cruz Blvd. Santa Clara, CA 95050, USA Tel: 1(800)879-8585 1(972)578-1699 Fax: 1(972)422-1311 www.wattstopper.com Outdoor 180 & 270 PIR Motion s Model#s: EW-100-120
More informationInstruction Sheet REB SERIES. Rotating Sliding Base REB18
Instruction Sheet REB SERIES Rotating Sliding Base REB14 REB18 THANK YOU Thank you for purchasing the REB Series Rotating Sliding Base. Please read these instructions thoroughly before installing this
More informationDFN2020MD-6 HUSON (thermal enhanced ultra thin small outline; no leads) P (plastic) S (surface mount) Issue date Manufacturer package code
DFN2020MD-6 plastic, thermal enhanced ultra thin small outline package; no leads; 6 terminals; 0.65 mm pitch; 2 mm x 2 mm x 0.65 mm body 23 January 2017 Package information 1. Package summary Table 1.
More informationBracket Assembly and Installation Manual
Bracket Assembly and Installation Manual Model POA-CHB-DWL2500 Contents Installation Precautions ------------------------- 1 Parts list -------------------------------------------- 2 Attach the Projector
More informationD (double) Package type descriptive code XSON16. P (plastic) JEDEC package outline code. MO-252 Mounting method type
XSON16 plastic extremely thin small outline package; no leads; 16 terminals; body 2.5 x 3.2 x 0.5 mm 8 June 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive
More informationInstruction Sheet D-CPU. Secure CPU Holder
Instruction Sheet D-CPU Secure CPU Holder I-00457 Rev A PARTS LIST NOTE: Select Security Components when a more secure application is desired. Mounting Track with Mounting Tape Security Bracket Assembly
More informationM5 x 55 mm. M5 x 35 mm. 3 mm. M5 x 45 mm
Paxton ins-20000 ? 24 mm 16 mm 10 mm M5 x 35 mm M5 x 45 mm M5 x 55 mm 3 mm 1 1 2 Ø 24mm 3 4 5 6 1 2 3 2 7 8 9 10 + + + + 11 12 3 x1 100 x1 1000 Net2 Pro/Net2 Lite: http://paxton. info/1438 4 1 2 3 4 5
More informationHVQFN (thermal enhanced very thin quad flatpack; no leads) P (plastic) MO-220 S (surface mount) Issue date Manufacturer package code
HVQFN48 plastic thermal enhanced very thin quad flat package; no leads; 48 terminals; 7 mm x 7 mm x 0.85 mm 5 February 2018 Package information 1. Package summary Table 1. Package summary Terminal position
More informationINSTALLATION SUGGESTIONS LEVEL APPLICATION LIMITED WARRANTY
INSTALLATION SUGGESTIONS LEVEL APPLICATION LIMITED WARRANTY L.J. Smith, Inc. issues the following Limited Warranty: The product(s) furnished hereunder are warranted to be free from defects in material
More informationArt.- No Operator s Manual. Edition 3/06
Stand 600 Art.- No. 59700 Operator s Manual Edition /06 Product Description The Stand 600 serves for holding and transporting the Hermes and A-series printer. It is lightweight constructed, very stable
More informationINSTALLATION GUIDE. AXIS T91A63 Ceiling Mount ENGLISH
INSTALLATION GUIDE AXIS T91A63 Ceiling Mount ENGLISH About this Document This document includes instructions for installing the AXIS T91A63 Mounting Accessory. Equipment Modifications This equipment must
More informationD (double) Package type descriptive code TSSOP8. TSSOP (thin shrink small outline package) Package style suffix code
TSSOP8 leads; body width 3 mm 8 February 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code TSSOP8 Package type industry code TSSOP8 Package style
More informationD (double) Package type descriptive code. TSOP6 Package type industry code. TSOP6 Package style descriptive code
plastic, surface-mounted package (TSOP6); 6 leads; mm pitch; 2.9 mm x 1.5 mm x 1 mm body 5 May 2018 Package information 1. Package summary Terminal position code D (double) Package type descriptive code
More informationB (bottom) Package type descriptive code Package type industry code. VFBGA Package style descriptive code
VFG64 20 ecember 2016 Package information 1. Package summary Terminal position code (bottom) Package type descriptive code VFG64 Package type industry code VFG Package style descriptive code VFG (very
More informationSheet Metal Design Guidelines
Sheet Metal Design Guidelines Curl and Lance Design Guidelines Issue X, May 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form)
More information3M Printscape TM Personalized Gift Bag Kit Square Base or Rectangular Base For Inkjet Printers
3M Printscape TM Personalized Gift Bag Kit Square Base or Rectangular Base For Inkjet Printers General Description The 3M Printscape TM Personalized Gift Bag Kit contains everything needed to create five
More informationChristie Duo Stacking Frame
Christie Duo Stacking Frame Installation Manual 020-101055-01 Christie Duo Stacking Frame Installation Manual 020-101055-01 NOTICES COPYRIGHT AND TRADEMARKS 2013 Christie Digital Systems USA Inc. All
More informationD (double) Package type descriptive code TSSOP8. TSSOP (thin shrink small outline package) Package body material type
TSSOP8 plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm 8 June 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive
More informationSOT Package summary
1 Package summary HLQFP64, plastic, thermal enhanced low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body; 4.9 mm x 4.9 mm exposed pad 7 August 2018 Package information
More informationTauten Tab Tension Screen User Manual
Tauten Tab Tension Screen User Manual Thank you for choosing a Tauten Series Tab Tension screen by Cirrus Screens. Please read through this user manual and understand all instructions before installing
More information3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
More informationD (double) Package type descriptive code VSSOP8. P (plastic) JEDEC package outline code. MO-187 Mounting method type
VSSOP8 plastic very thin shrink small outline package; 8 leads; body width 2.3 mm 5 July 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code VSSOP8
More informationINSTALLATION MANUAL PBC-UMS
INSTALLATION MANUAL. PBC-UMS Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com Rev. 01 PBL-110 Projector Mount Page 2 Installation
More informationD (double) Package type descriptive code. SC-73 Package type industry code. SC-73 Package style descriptive code
heatsink; leads 8 February 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code Package type industry code Package style descriptive code SO (small
More informationMachining Design Guidelines
Machining Design Guidelines Milling Rules Issue IV, Jan 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form) may be reproduced,
More informationKNEEWALL APPLICATION
INSTALLATION SUGGESTIONS KNEEWALL APPLICATION LIMITED WARRANTY L.J. Smith, Inc. issues the following Limited Warranty: The product(s) furnished hereunder are warranted to be free from defects in material
More informationINSTALLATION INSTRUCTION Silo Multiples - New Construction Housing MT-4*15, MT-4*10
IMPORTANT SAFETY INSTRUCTIONS 1. Read all instructions before installing. 2. System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.
More informationInstallation Instructions
With ComtronICS new EZ Dash Mount, your tablet is securely mounted on the vehicle s dash, adjusts for multiple viewing positions, and frees up valuable space in your vehicle s interior. 246548 - Center
More informationD (double) Package type descriptive code. SMA; PMOS Package type industry code. SMA; PMOS Package style descriptive code
SMA PMOS rectangular surface mounted package; 2 8 February 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code SMA; PMOS Package type industry code
More informationSOT1688-1(SC) 1 Package summary
1 Package summary HLQFN16; plastic, thermal enhanced low profile quad flat non-leaded package; 16 terminals; 0.8 mm pitch; 4 mm x 4 mm x 1.5 mm body 16 July 2018 Package information Terminal position code
More informationManual Pull-Down Screen. Elite Manual Series USER S GUIDE MATTE WHITE. Rev. 1.3
Manual Pull-Down Screen Elite Manual Series USER S GUIDE MATTE WHITE Pre-installation 1. Carefully unpack the screen 2. Always handle the screen on a clean and level surface. a: Vertical hooks suspend
More informationB (bottom) Package type descriptive code. VFBGA144 Package type industry code. VFBGA144 Package style descriptive code
8 February 2016 Package information 1. Package summary Terminal position code (bottom) Package type descriptive code VFG144 Package type industry code VFG144 Package style descriptive code VFG (very thin
More informationCopyright Notice. HCL Technologies Ltd. All rights reserved. A DEFINITIVE GUIDE TO DESIGN FOR MANUFACTURING SUCCESS
Copyright Notice HCL Technologies Ltd. All rights reserved. No part of this document (whether in hardcopy or electronic form) may be reproduced, stored in a retrieval system, or transmitted, in any form
More informationCOMPETITOR WM-203 COMBO BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier COMPETITOR WM-203 COMBO BENCH Assembly Instruction Exploded Diagram Parts List
More informationBARCO PROJECTION SYSTEMS
BARCO PROJECTION SYSTEMS CM CV120 & CV110 R9842330 INSTALLATION MANUAL Date : 16122004 Rev : 00 Art. No. : R5976715 Due to constant research, the information in this manual is subject to change without
More informationSheet Metal Design Guidelines
Sheet Metal Design Guidelines Hem Design Guidelines Issue XII, June 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form) may
More informationFSCTD Dual Back to Back Flat Screen Ceiling Mount
Page 1 of 6 FSCTD Dual Back to Back Flat Screen Ceiling Mount The FSCTD Dual Back to Back Flat Screen Ceiling Mount is designed to suspend a monitor from a single flange mounted to structure in the ceiling.
More informationParameter Symbol Min Typ Max Unit Note Strip Length L 300±2 mm Active length = 300mm Strip Width W 10±0.2 mm Active width = 10mm 1,3±0, 15
AS5311 Magnetic Multipole Strip MS10-300 Pole Length 1.0mm, 300 Poles 1 General This specification defines the dimensional and magnetic properties of a multipole magnetic strip for use with the AS5311
More informationOwner s Manual Quad Flat Screen Flex Arm Desk Clamp
Owner s Manual Quad Flat Screen Flex Arm Desk Clamp MODEL: DDR1327SQFC CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75x75/100x100 27 MAX 10kgx4 (22lbsx4)
More information1.0 General Description
1.0 General Description Figure 1 - Plug-N-Play Noise Blanker for the Collins 75S-1 Series The Collins Noise Blanker is designed to be a Plug-N-Play accessory for the Collins 75S-1 series. The Noise Blanker
More informationInstallation Instructions PP-FCMA
Installation Instructions PP-FCMA Step 1 Carefully remove a 24 (610mm)x48 (1120mm) or two 24 (610mm)x24 (610mm) suspended ceiling tiles. Step 2 Install the four (4) each ¼ x3 eye bolts securely into the
More informationMARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set Exploded
More informationBy SP Partners, LLC. INSTALLATION GUIDE. ProTech-12
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech-12 IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under
More informationPan & BoxBrake Vise Attachment. Item no:
Pan & BoxBrake Vise Attachment Item no:9629611 Technical data max. material width 320 mm/12.5" Weight 10 kg/22 Ibs. Sheet thickness 2.5 mm Abkantleistung max. bei 90 max. folding capacity at 90 Aluminium
More informationOwner s Manual Full Motion Flat Screen Wall Mount
Owner s Manual Full Motion Flat Screen Wall Mount MODEL: DWM1327SP CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75x75 100x100 27 MAX 15 kg (33 lbs)
More informationD (double) Package type descriptive code TSSOP14. TSSOP (thin shrink small outline package) Package style suffix code
TSSOP14 leads; body width 4.4 mm 8 February 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code TSSOP14 Package type industry code TSSOP14 Package
More informationvisual impact from any angle
visual impact from any angle Vikuiti 1. Introduction For stunning images that are brilliantly sharp and clear the Vikuiti Rear Projection Display Screen gives high resolution and extreme contrast, brighter
More informationDEMO MANUAL DC2349A LTC5586 6GHz High Linearity I/Q Demodulator with Wideband IF Amplifier DESCRIPTION BOARD PHOTO
DESCRIPTION Demonstration circuit 2349A showcases the LTC 5586 wideband high linearity IQ demodulator with IF amplifier. The Linear Technology USB serial controller, DC590B, is required to control and
More informationHollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide
Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide Tools Required: two adjustable wrenches, pliers, ¾ socket wrench recommended Note: please do assembly near your vehicle as you Can
More informationSignature Choral Riser Side Rail
Assembly/Owner s Manual Signature Choral Riser Side Rail Signature Choral 3-Step Riser with Optional Side Rail Signature Choral 4-Step Riser with Optional Side Rail CONTENTS Visit the Signature Choral
More informationD (double) Package type descriptive code SO8. SO (small outline) Package body material type. P (plastic) IEC package outline code
SO8 plastic, small outline package; 8 leads; 1.27 mm pitch; 4.9 mm x 3.9 mm x 1.75 mm body 7 December 2018 Package information 1 Package summary Terminal position code D (double) Package type descriptive
More informationOWNER S MANUAL. Hercules Diamond Basketball System WELCOME TO THE FAMILY OF HERCULES OWNERS
OWNER S MANUAL Warning! Do not slide, climb, or play on pole.! Keep organic material away from pole base. Grass, litter, etc. could cause corrosion and /or deterioration.! Check pole system twice a year
More informationADJUSTABLE MOUNTING POST
C Part Number 069 B EACH CARTON CONTAINS D Floor Mounting Kit A. Bottom Post Assembly B. Top Post Assembly C. Flange Head Bolts (x2) D. Floor Mounting Kit. 5/8 Wx/6 Hx0 L framing channels (x2) 2. /8-6x4
More informationWall Mount Bracket YM-81
CN/JA/EN/DE/FR/ES/IT/SV/RU/PT/TR/NL/PL/FI/CS/NO/LT/TH/ID/MS/VI/TW/KO/AR Wall Mount Bracket YM-81 English User s Guide Deutsch Bedienungsanleitung Français Mode d emploi Español Italiano Svenska Português
More informationDATA SHEET SE2425U : 2.4 GHz Bluetooth Power Amplifier IC. Applications. Product Description. Features. Ordering Information
Applications Bluetooth tm wireless technology (Class 1) USB dongles, PCMCIA, flash cards, Access Points Enhanced data rate Features Integrated input and inter-stage match +25 dbm GFSK Output Power +19.5
More informationModel POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist
Assembly and Installation Manual Projector Bracket Model POA-CHB-XL50 Be sure to consult with a qualified installation specialist This bracket is specifically for use with our projector. Be especially
More informationS (surface mount) Issue date
Plastic thermal enhanced very thin small outline package; no leads; 16 terminals 10 June 2016 Package information 1. Package summary Table 1. Package summary Terminal position code Package type descriptive
More informationMANCHESTER VANITY BASE
MANCHESTER VANITY BASE INSTALLATION INSTRUCTIONS Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday or e-mail: contactus@magickwoods.com. Models:
More informationFletcher-Terry Titan Series Rotary Trimmers
Fletcher-Terry Titan Series Rotary Trimmers Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com OWNER S MANUAL Fletcher Titan The Fletcher-Terry Company 65 Spring Lane
More information3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide Installing a cabinet with stakes Instructions July 2016 78-0015-3106-6 2 July 2016 78-0015-3106-6
More informationGB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler
Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00 Contents Weight Limit... 2 Warning Statements... 2 Installation Tools...
More informationMaxLite LED Self-Driven LiteBars
Accessories Length: 4, 12, 40 Connector Box Straight Joiner Wire Joiner Mounting Clip Distribution Box Left Joiner Wire Joiner with Plug length: 40 Magnet Bracket Right Joiner End Cap Rotation Bracket
More informationTED-Kit 2, Release Notes
TED-Kit 2 3.6.0 December 5th, 2014 Document Information Info Content Keywords TED-Kit 2, Abstract This document contains the release notes for the TED-Kit 2 software. Contact information For additional
More informationOperator s Handbook. Suspended Arm
Operator s Handbook Suspended Arm SAR15 Z 5 Code: 010690/Z/5 SAR15 XZ 85 Code: 010690/XZ/85 SAR15 XYZ 855 Code: 010690/XYZ/855 KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA TEL +39 0445
More informationUser Guide AutoFiller 3500
User Guide AutoFiller 3500 Operation & Service 121 Point West Blvd. St. Charles, MO 63301 1-800-922-9142 Fax 1-636-925-0041 tsr@rxsystems.com www.rxsystems.com Table of Contents 1 Introduction... 1 2 Specifications,
More information3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet Instructions July 2011 3 Contents 1.0 General... 3 2.0 Cabinet Overall Description... 3 3.0 Tools Required... 4 4.0 Kit Contents...
More informationD (double) Package type descriptive code. SOD2 Package type industry code. DSN Package style descriptive code
terminals; body 0.6 x 0.3 x 0.3 mm 8 February 2016 Package information 1. Package summary Terminal position code D (double) Package type descriptive code SOD2 Package type industry code DSN0603-2 Package
More informationInstallation and Assembly: Adjustable Suspended Ceiling Channel Kit
Installation and ssembly: djustable Suspended Ceiling Channel Kit Model: CMJ500R1 C U L US This product is UL Listed. It must be installed by a qualified professional installer. Maximum UL Load Capacity:
More informationBy SP Partners, LLC. INSTALLATION GUIDE. ProTech
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech IMPORTANT - READ THIS FIRST Inspect stair for any damage
More informationHVQFN32 HVQFN (thermal enhanced very thin quad flatpack; no leads) P (plastic) MO-220 S (surface mount) Issue date
HVQFN32 DFN5050-32: plastic thermal enhanced very thin quad flat package; no leads; 32 terminals; body 5 x 5 x 8 June 2016 Package information 1. Package summary Table 1. Package summary Terminal position
More informationUniversal Projector Ceiling Mount Model: DPM-45
Universal Projector Ceiling Mount Model: DPM-45 Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented within this
More informationSOT023_fr SOT023_fw REL Major version date Minor version date Security status
plastic, surface-mounted package; 3 terminals; 1.9 mm pitch; 2.9 mm x 1.3 mm x 1 mm body 9 January 2017 Package information 1. Package summary Table 1. Package summary Dimensions (mm) 2.9 x 1.3 x 1 Terminal
More informationSOD323_fr SOD323_fw REL Major version date Minor version date Security status
plastic, surface-mounted package; 2 terminals; 1.7 mm x 1.25 mm x 0.95 mm body 9 January 2017 Package information 1. Package summary Table 1. Package summary Dimensions (mm) 1.7 x 1.25 x 0.95 Terminal
More informationREF42plus HMI Cutting Tool Operating Guide
REF42plus HMI Cutting Tool Operating Guide 2 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted
More informationKMFS. User Manual. sharpener SHARPENING KIT FOR SYMMETRICAL KNIFE SHARPENING KMFS SHARPEN YOUR KNIVES LIKE A PRO - 1 -
User Manual SHARPENING KIT FOR SYMMETRICAL KNIFE SHARPENING sharpener Name: User Manual Sharpening system with accurate angle retention Date: 18 August 2017-1 - Document version: Manual_ sharpener_2017_v1
More informationINSTALLATION MANUAL PBL-UMP
INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...
More informationGrand Garden Chalet 6X3 Assembly Manual
Revision #11 June 15, 2010 Grand Garden Chalet 6X3 Assembly Manual Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use Safety Eyewear
More informationMounting Systems. Tilt Kit Installation Guide. Tilt Kit Installation Guide. Table of Contents
Mounting Systems Tilt Kit Installation Guide Tilt Kit Installation Guide Table of Contents Part I. Preparing.........................................2-4 Part II. Feature of the Rail and the Module...................
More informationK12.12 SINGLE LOCKS SERIES 8600 K12 DOORS
K12 DOORS K12.12 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door locks series 8600... K12.12.03 1.1.
More informationWallAccess - No Door
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE WallAccess - No Door June 2012 IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed
More informationOwner s Manual Tilt Flat Screen Wall Mount
Owner s Manual Tilt Flat Screen Wall Mount MODEL: DWT3770X CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 200x200/300x300/ 400x200/400x400/ 600x400/800x400
More informationPIN Diode Chips Supplied on Film Frame
DATA SHEET PIN Diode Chips Supplied on Film Frame Applications Switches Attenuators Features Preferred device for module applications PIN diodes supplied are 00% tested, saw cut, and mounted on film frame
More informationGrand Garden Chalet 6X3 Assembly Manual
Revision #8 November 1, 2009 Grand Garden Chalet 6X3 Assembly Manual Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use Safety
More informationOne Arm Articulating TV Wall Mount
One Arm Articulating TV Wall Mount Item No: 63607068/63607107/63607139 MIN:3.07 in / 78 mm MAX:21.65 in / 550 mm MIN: 2.95 x 2.95 in / 75 x 75 mm MAX:3.9 x 3.9 in / 100 x 100 mm Congratulations on your
More informationD (double) Package type descriptive code HSOP44. HSOP (heatsink small outline package) Package body material type. P (plastic) Mounting method type
HSOP44 plastic, heatsink small outline package; 44 leads; low standoff height, mm pitch, 15.9 mm x 11.0 21 ugust 2018 Package information 1 Package summary Terminal position code D (double) Package type
More informationGF705 MagnetoResistive Magnetic Field Sensor
The is a magnetic field sensor based on the multilayer Giant MagnetoResistive (GMR) effect. The Sensor contains a Wheatstone bridge with on-chip flux concentrators to improve the sensitivity. The sensor
More informationplastic ball grid array package; 426 balls B (bottom) Package type descriptive code BGA426 Package type industry code
8 February 2016 Package information 1. Package summary Terminal position code B (bottom) Package type descriptive code BG426 Package type industry code BG426 Package style descriptive code BG (ball grid
More informationSingle Flex and Double Flex Couplings (i)
Single Flex and Double Flex Couplings (i) FORM NO. L00G00 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change
More informationBy SP Partners, LLC. INSTALLATION GUIDE. Star
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Star By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Star IMPORTANT - READ THIS FIRST Inspect stair for any damage prior
More informationLC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns The LC200C9F Flat Screen Ceiling Mount is designed to suspend a monitor from a round flange
More informationCOMPETITOR CB-610 STANDARD BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice COMPETITOR CB-610 STANDARD BENCH Hardware Identifier Assembly Instruction Exploded Diagram Parts List
More informationOwner s Manual Tilt Flat Screen Wall Mount
Owner s Manual Tilt Flat Screen Wall Mount MODEL: DWT1327S CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75x75/100x100 27 MAX 40kg (88lbs) MAX Este
More informationROOF-RACK LOADING CAPACITY: 80kgs ISSUE: A ISSUE RELEASE DATE: 03/10/2012 TOTAL NUMBER OF PAGES INCLUDING COVERSHEET: 5
FITTING INSTRUCTIONS FOR Holden Colorado Dual Cab LX, LT & LTZ Variants Only Not Applicable on LX, LTZ, DX, Space & Single Cab Variants Released Jun 12 ANCHOR POINT EXTENDED Roof Rack PART NUMBER: APEX/CAP099-2
More informationOwner s Manual Tilt Flat Screen Wall Mount
Owner s Manual Tilt Flat Screen Wall Mount MODEL: DWT60100XX CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 200x200/300x300/400x200/ 400x400/600x400/800x400/
More informationAA746. MagnetoResistive FreePitch Sensor. Data sheet
MagnetoResistive FreePitch Sensor The is an angular sensor based on the Anisotropic MagnetoResistive (AMR) effect. The sensor contains two Wheatstone bridges with common ground (GND) and supply pin (V
More informationKipp Zonen & INSTRUCTION MANUAL. SIGNAL AMPLIFIER 4 20 ma
Kipp Zonen & INSTRUCTION MANUAL 24 SIGNAL AMPLIFIER 4 20 ma 0305 360 IMPORTANT USER INFORMATION IMPORTANT USER INFORMATION Reading this entire manual is recommended for full understanding of the use of
More informationPhotometric Report. Internet:
Photometric Report e-mail: service@glp.de Internet: http://www.glp.de Impression Spot One Photometric Report Manufacturer: GLP German Light Products GmbH, Im Stöckmädle 13, 76307 Karlsbad, Germany Product:
More informationOwner s Manual. Tilt Wall Mount for Flat and Curved Screens Security Version
Owner s Manual Tilt Wall Mount for Flat and Curved Screens Security Version Model: DWTSC3255MUL 200x200 / 300x300 / 400x200 / 400x400 55 MAX 99 lb. (45 kg) MAX Este manual esta disponible en español en
More information