3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet
|
|
- Jasper Matthews
- 5 years ago
- Views:
Transcription
1 3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet Instructions July
2 Contents 1.0 General Cabinet Overall Description Tools Required Kit Contents M Add-On Terminal 4220P 400-Pair Installation M Jumper Trough Installation Accessories
3 1.0 General 1.1 The 3M Add-On Terminal 4220P 400-Pair is an outdoor enclosure designed to be mounted on the side of an existing cross-connect cabinet to provide additional cross-connect capacity without having to retrofit or replace the existing cabinet. The add-on terminal comes in two colors, has a powder-coated steel housing and is supplied with 3M Self-Strip Block 4320 or 3M Quick Connect System (QCS) 2810 Blocks. 1.2 The 3M Jumper Trough is an expandable channel that may be installed in an existing cross-connect cabinet to house jumpers that run between the cabinet and an add-on terminal. 2.0 Cabinet Overall Description 2.1 3M Add-On Terminal 4220P 400-Pair 6.28" 48.04" 21.02" 16.16" 10.88" 2.2 3M Jumper Trough Fully Extended 39.85" 8.96" 4.30" 23" Closed 3
4 3.0 Tools Required A. Normal hand tools needed for a mechanical job, i.e. socket set, open-end wrenches, etc. B. Power screwdriver, power reciprocating saw, grinder C. 216 tool D. Safety glasses E. Protective gloves F. Electric drill with 9/32" drill bit and generator G. 3" hole saw H. 1 1/2" hole saw I. Metal-cutting saw Carefully follow safety, health and environmental information given on product label or the Materials Safety Data Sheet (MSDS). Installation site should facilitate construction, safety, installation, and maintenance. The side of the cabinet to which the 3M Add-On Terminal Kit 4220P will be installed should provide sufficient clearance for future access. 4.0 Kit Contents D B A C E 3M Self-Strip Block 4320 shown 4.1 Kit Contents for 4220P Terminal 4220P-SSHCTO/ /T-A (G) 400-pair housing with 3M 710 Splicing Modules almond/green cabinet color 4220P-SSHCTO/ /GBM-A (G) 400-pair housing with 3M MS 2 Splicing Modules 4005-GBM/TR almond/green cabinet color A. Template for cutting holes B. Enclosure C. 400-pair frame preterminated with splice modules (710 or 4005 GBM modules) D. 3M Self-Strip Single-pair Probe and Dish 4327-A E. Scotch Rubber Mastic 2228, 2" x 3' roll Visually inspect all components. If any component is missing or appears damaged, do not install. Call 3M customer service at for a replacement product. 4
5 A B D C 4.2 Kit Contents for 3M Jumper Trough A. 3-piece adjustable trough B. Scotch Rubber Mastic 2228, 2" x 3' roll C. Pan head self-tapping screws (2) D. Template for cutting hole Trough contains two pre-installed cable ties Visually inspect all components. If any component is missing or appears damaged, do not install. Call 3M customer service at for a replacement product. 3M Bonding Kit for 40-Type Cabinet For non-pivot 40-type frames, use accessory bonding kit. 5
6 40-type cabinet non-pivot frame 40-type cabinet pivot frame 6
7 Cover plate 4.3 Remove gravel. Prior to the installation of the 3M Add-On Terminal 4220P 400-Pair and 3M Jumper Trough, open cabinet doors and remove base cover plate at the bottom front of the cabinet. Remove excess gravel and make sure no cables are in the way before using saw or grinders. Remove all ground wires and protect face of crossconnect frame M Add-On Terminal 4220P 400-Pair Installation 5.1 Remove door assembly. 5.2 Remove 3M Self-Strip Block or 3M Quick Connect System (QCS) 2810 Block Frame from 4220P Add-On Terminal Kit. 7
8 5.3 Remove the knockouts for entry of the self-strip block tails and jumper. Lower the existing frame inside the cabinet and move conductors away from the area where drilling will take place. Non-pivot frames in 40-type cabinet may have center frame support along both sides of cabinet. In this case, use bottom cutouts on 400-pair. Use right-hand opening for right mounting and left-hand opening for left mounting. 3" opening 3" opening 3" opening 2 1/2" cable port for leftmounting non-pivot Bottom line Align with cabinet seam Right-mount 3" jumper port openings 2 1/2" cable port for rightmounting non-pivot Left-mount 3" jumper port openings 5.4 Use template supplied with 3M Add-On Cabinet 4220P 400-Pair Kit to mark mounting and cable port holes. Align the bottom line where the base is connected to the upper cabinet housing. 8
9 cable port jumper port 5.5 Mark the location of entrance between cabinets on the wall of the existing cabinet. This should be centered on the trough opening. Drill a 3" hole for the jumper run to the trough. For non-pivot frames, use 2 1/2" hole as center frame. Supports along the inside of the cabinet may get in the way of drilling hole. Bottom two markings on template are for non-pivot frame. Rubber mastic around hole 5.6 Install bolts and nuts to secure the 3M Add-On Terminal 4220P 400-Pair to the side of the cabinet and tighten. Thread the 3M Self Strip Block tails from the frame through the openings for the splice chamber and secure the frame to the terminal. 5.7 Secure the tails from the terminal to the splice hanger bars in the splice chamber using cable ties. Raise the frame and tighten bolts to secure the frame. 5.8 File burrs from all cut edges. Install Scotch Rubber Mastic 2228 around cut holes on cabinet and 4220P housing. 9
10 6.0 3M Jumper Trough Installation Center template between ground plate Center template between bolts on front plate Bolts Bolts 6.1 Center template for trough over top frame area to be cut away. 1 1/2" 6.2 Drill 1 1/2" hole in the face plate of cabinet using 1 1/2" hole saw to create an entrance hole for the reciprocating saw. 10
11 6.3 Using a reciprocating saw, cut out as much of the portion of the support bar as possible for trough to fit in. Opening in top frame area 6.4 Remove metal plate on top frame area to allow for trough insertion. 11
12 6.5 Grind away any sharp edges with grinder. If use of accessory bonding kit is necessary, install it at this time. Refer to the 3M Bonding Kit for 40-type cabinets instructions. 6.6 Cut rubber mastic supplied and install to cover up sharp edges. Use Scotch Rubber Mastic
13 6.7 Rubber mastic installed. 2 screws 2 screws 6.8 Remove 4 screws from bottom of each jumper run (2 each). 13
14 6.9 Tighten cable ties to close the trough opening for ease of installation Install trough through the front opening. Cut the cable ties to allow the trough to expand to fill the hole, and pull out the sliding shelves to meet the side walls of the cabinet. 14
15 6.11 Install the self-tapping screws and replace gravel in the cabinet Replace and secure bolts in front access panel. 15
16 7.0 Accessories 7.1 Bonding Kit: Auxiliary ground bars and mounting hardware for when the add-on terminal is installed on a cabinet. In applications such as this, the ground bar in the cabinet may need to be cut away to provide wire trough access. This kit facilitates the installation of replacement ground bars in an alternate location. For 3M Self-Strip 4320 Blocks Product Number Description 4379 Tagging labels come with 3M Add-On Terminal 4220P and can be ordered separately M Self-Strip Single-Pair Probe M Priority Circuit Caps 4327P 3M Self-Strip Single-Pair Pocket Probe M Front Tap Shoe Kit 25 Pair at a Time For 3M Quick Connect System (QCS) 2810 Blocks Product Number Description 2810-L 3M Label Holder 2810RC-O 3M Replacement Cap, Orange 2810PC-R 3M Priority Cap, Red M Single-Pair Test Probe SOR OC Cable wire termination tool 3M, MS 2 and Scotch are trademarks of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Communication Markets Division 6801 River Place Blvd. Austin, TX Please Recycle. Printed in USA. 3M All Rights Reserved.
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide Installing a cabinet with stakes Instructions July 2016 78-0015-3106-6 2 July 2016 78-0015-3106-6
More information3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
More information3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
More information4200 JSP, KSP, LSP and MSP Cabinets
4200 JSP, KSP, LSP and MSP Cabinets Instructions May 1995 Issue 1, 34-7037-9012-0 1 2 Contents: 1.0 General... 4 2.0 Description of Cabinets... 4 3.0 Accessories and Optional Cross Connect Test Probes...
More information3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
More information3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3 Instructions October 2013 3 1.0 Table of contents 1.0 Summary...3 2.0 Cable and Fiber Preparation...4
More information3M Scotchlok Copper/ Aluminum Compression Lugs, Series
Copper/ Aluminum Compression s, 40000 Series Data Sheet January 2014 Description Agency Approvals and Self Certifications Copper/Aluminum Compression s 40000 Series are made of high conductivity aluminum
More information3M Scotchlok Insulated Electrical Spring Connector B (Blue)
3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor
More information3M Dynatel Triple Play Customer Service Test Set INS970
3M Dynatel Triple Play Customer Service Test Set Advanced Diagnostics Software Options DELT, SELT and Spectral Analysis The Test Set has the ability to run advanced diagnostics in different scenarios to
More informationMaterial: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
More information3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions Contents 1.0 Purpose....................................... 1 2.0 Development Kits..................................
More information3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
More informationSpecifications. Important Safety Information
Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.
More informationInstallation Instructions Tailgate Rack Bracket
Installation Instructions Tailgate Rack Application: Jeep Wrangler 1986 Current Part Number: 41411 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question. Click here for more
More information3M Dynatel Far End Device III
3M Dynatel Far End Device III User s Guide PAIR 1 GND CO PAIR 2 F1 F2 STATUS Dynatel Far End Device III 1 1/2 0 Future-Proof Testing Platform February 2009 78-8140-2657-7-A 3 2 3M Dynatel Far End Device
More informationADJUSTABLE MOUNTING POST
C Part Number 069 B EACH CARTON CONTAINS D Floor Mounting Kit A. Bottom Post Assembly B. Top Post Assembly C. Flange Head Bolts (x2) D. Floor Mounting Kit. 5/8 Wx/6 Hx0 L framing channels (x2) 2. /8-6x4
More informationLC200WT Security Wall Mount with Tilt for up to 32" Flat Screens
Page 1 of 6 The LC200WT Security Wall Mount with Tilt is designed to secure up to a 32" flat panel monitor to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front
More informationDOCUMENT OBSOLETE. Dynatel. 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write
3 Dynatel 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write New-to-the-world technology for locating underground utilities without any doubt. The 3M Dynatel
More informationFar End Device II Model 1342
3 Far End Device II Model 1342 Operating Instructions Optimized for ADSL2+ May 2007 78-8130-0876-6-C Table of Contents Introduction...3 Power-up...4 Connecting the 3M Far End Device II...5 Installing,
More informationLC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less
Page 1 of 6 The LC6X4WTM Security Wall Mount with Tilt is designed to secure a flat screen, up to a 60", to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front of
More informationInstallation and Assembly: Recessed Cable Management and Power Storage Accessory Box
Installation and Assembly: Recessed Cable Management and Power Storage Accessory Box Models: IBA3, IBA3-W 2300 White Oak Circle Aurora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com
More information3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
More informationYour Performance Partner
Assembly Instructions Attic Storage System Your Performance Partner CONTENTS Safety Precautions.................................. 2 Warranty.......................................... 2 Important User Information............................
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More informationHEAVY DUTY COPPER CABLE LUGS
Industrial products we wholesale, you distribute (SEAMLESS TUBULAR) (TIN PLATED) (SEAMLESS TUBULAR) (NON-PLATED) UL LISTED 4909 Rondo Drive, Fort Worth, Texas 76106, USA Telephone: 1-877-732-0342 Fax:
More informationInstallation Instructions HOSS Hardtop Organized Storage System
Installation Instructions HOSS Hardtop Organized Storage System Application: Hard Top and Doors Storage System Part Number: 42801 www.bestop.com - We re here to help! Visit our web site and click on Ask
More information3M Clear Track Hallway Fiber Pathway
Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant
More informationFletcher F-3000 / F-3100 Accessory Laser Kit
Fletcher F-3000 / F-3100 Accessory Laser Kit Shown Assembled on F-3000 Machine Product Warranty The Fletcher-Terry Company warrants the product purchased to be free from defects in parts and workmanship
More informationInstruction Sheet D-CPU. Secure CPU Holder
Instruction Sheet D-CPU Secure CPU Holder I-00457 Rev A PARTS LIST NOTE: Select Security Components when a more secure application is desired. Mounting Track with Mounting Tape Security Bracket Assembly
More informationTechnical Data February, 2016
Technical Data February, 2016 Product Description 3M DP-600 is a non-sag, grey, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of
More information9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT. Model 90721
9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT Model 90721 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More informationLC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60
More information3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
More informationKNEEWALL APPLICATION
INSTALLATION SUGGESTIONS KNEEWALL APPLICATION LIMITED WARRANTY L.J. Smith, Inc. issues the following Limited Warranty: The product(s) furnished hereunder are warranted to be free from defects in material
More informationDOOR SECURITY AND REPAIR KIT
DOOR SECURITY AND REPAIR KIT MODEL #S SET-SLP-X0552 SET-STD-X0552 SET-UNI-X0002 SET-ULT-X0002 R Questions? Call customer service at -888-582-2294 or visit www.armorconcepts.com PACKAGE CONTENTS A B C E
More informationContinuous Handrail Kit Installation Instructions
Continuous Handrail Kit Installation Instructions ALUMINUM RAILING SYSTEM Canadian Version Wall Application (see page 2) Railing Application (see page 7) Wall anchors not provided Hardware included: 1x
More informationSpecifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators
Specifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators PHYSICAL SPECIFICATIONS SIZE WEIGHT (H X W X D) IN. (CM) (INCLUDING BATTERIES) Transmitter 6.75 x 11.25 x 7.75 (17.2 x 28.6 x 19.7)
More informationInstallation and Assembly: Recessed Cable Management and Power Storage Accessory Box
Installation and Assembly: Recessed Cable Management and Power Storage Accessory Box Models: IBA2AC, IBA2AC-W 2300 White Oak Circle Aurora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com
More informationSignal Integrity Test Report
PD-0098 Signal Integrity Test Report 3M External MiniSAS Cable Assemblies 3 Electronic Solutions Division Subject: 3M External MiniSAS Cable Assembly Page: 1 of 14 Table of Contents 1.0 Scope... 2 2.0
More information#27541 Mobile Laptop. Charging Station. Assembly Instructions
1 #27541 Mobile Laptop Charging Station Assembly Instructions #27541 Mobile Laptop Charging Station Part Drawing Description Qty Part Drawing Description Qty Hardware List P-1 Left Leg Welded 1 EA A Phil
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More information300C6 CONTINUOUS HINGE SEMI-FRAMELESS DOOR KIT
300C6 CONTINUOUS HINGE SEMI-FRAMELESS DOOR KIT LIMITED WARRANTY AND REMEDY Alumax Bath Enclosures warrants to its dealers, customers, and all subsequent purchasers and users, that the products supplied
More informationCOMPETITOR CB-610 STANDARD BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice COMPETITOR CB-610 STANDARD BENCH Hardware Identifier Assembly Instruction Exploded Diagram Parts List
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationLC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns Multi-position triple pivoting arms allows you to position the monitor
More informationSea Doo Spark Engine Access Kit
Sea Doo Spark Engine Access Kit PART# - RS4-130-EAK APPLICATION(S): Sea Doo Spark. 2up & 3up Models. We strongly recommend the use of a service manual to familiarize yourself with the various components
More informationMaxLite Linear Strip ECO Series
General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions
More information25-A Shawnee Way Bozeman, MT Fed ID PH FAX
25-A Shawnee Way Bozeman, MT 59715 Fed ID 81-0414516 PH 406-586-9393 FAX 406-585-7378 SkyBar Mount for UTV with 1 ¾ 2 Roll Bar Standard Mount (optional mount on page 3) This gun rack is supplied with brackets
More informationINSTALLATION INSTRUCTIONS FOR SMLS/SMSS Surface Mount Lock Shear & Surface Mount Strike Shear
Securitron Magnalock Corp. Tel 775.355.5625 550 Vista Boulevard Fax 775.355.5633 Sparks, NV 89434 info@securitron.com www.securitron.com ASSA ABLOY, the global leader in door opening solutions INSTALLATION
More information3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723
Technical Data November, 2009 M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 Product Description M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 is an isotropically
More informationPATRIOT DOCKS ASSEMBLY INSTRUCTIONS
6/1/2008 PATRIOT DOCKS ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical shoreline application.
More informationDesk/Wall-Mount Rack
Desk/Wall-Mount Rack Patent(s) Pending Installation Instructions Post P/N: 119-1752 119-1781 119-1782 119-4014 Frame P/N: 119-1591 119-1754 119-1755 Kit Contents (2) Frames (4) Posts Assembly Hardware
More informationASSEMBLY INSTRUCTIONS
LEGAL DISCLAIMER: Holland Computers will not be held liable for any incidental or consequential damages for breach of any expressed or implied warranty of the Arcade cabinet, nor an incidental or consequential
More informationPan & BoxBrake Vise Attachment. Item no:
Pan & BoxBrake Vise Attachment Item no:9629611 Technical data max. material width 320 mm/12.5" Weight 10 kg/22 Ibs. Sheet thickness 2.5 mm Abkantleistung max. bei 90 max. folding capacity at 90 Aluminium
More informationObsolete Document. Dynatel
3 Dynatel 2273ME Cable/Pipe and Fault Locators 2273ME-iD Cable/Pipe/Fault and Marker Locators with id Read/Write 2250ME Cable/Pipe Locators 2250ME-iD Cable/Pipe and Marker Locators with id Read/Write New-to-the-world
More informationBASIC TOOLS AND MATERIALS NEEDED. Introduction HOW TO CARE FOR YOUR DOOR
DO IT RIGHT! Use a Kohler Certified Installer, (KCI), for the installation of your Kohler Shower Door. Contact your Kohler Distributor/Showroom or call Kohler at 1-800-4-KOHLER for the KCI nearest you.
More informationInstallation Manual Roof Zone Ladder Rack
Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32
More informationTablet Arm for Wenger Playright Chairs
Assembly Instructions Tablet Arm for Wenger Playright Chairs CONTeNTs Before You Begin..........................................................2 Warranty.................................................................2
More informationAM500-U Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components Maximum Flat Panel Weight: 500 lb. / 226.79 kg. Wall Mount Bracket (Qty 2) Cross Bar 5/16 Flat Washers (Qty 6) Universal Spacers
More informationCirco Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate)
Circo Kids Loft Bed (incl. solid pine slats) DPCI # 242-17 - 9390 (White) DPCI # 242-17 - 9391 (Chocolate) >> assembly instructions 92346 E 1 2 Congratulations on your latest Target purchase Don't start
More informationInstruction Sheet REB SERIES. Rotating Sliding Base REB18
Instruction Sheet REB SERIES Rotating Sliding Base REB14 REB18 THANK YOU Thank you for purchasing the REB Series Rotating Sliding Base. Please read these instructions thoroughly before installing this
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FLIP Flip-Down LCD Mount NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial
More information340 & 350 SERIES BATH ENCLOSURES
INSTALLATION INSTRUCTIONS 340 & 350 SERIES BATH ENCLOSURES 800-643-1514 www.alumaxbath.com Copyright Alumax Bath Enclosures 2010. All rights reserved. LIMITED WARRANTY AND REMEDY ALUMAX BATH ENCLOSURES
More informationINSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L. Introduction. Box Contents. Wall Mount Installations
INSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L Introduction Thank you for purchasing the Sonance Soundbar SB46 M or SB46 L. When properly installed your new Soundbar will give you years of entertainment
More informationOwner's Manual. Contents of Box. (Fits RT400/450/500 Routertops) Tools Required. Symbols
Contents of Box Owner's Manual model number CB400u (Fits RT400/450/500 Routertops) This upgraded cabinet base is designed for use with Model RT400, 450, and 500 routertops. This cabinet uses Euro hinges,
More information340 & 350 SERIES DELUXE FRAMELESS BYPASS
BATH ENCLOSURES An Alcoa Company Tel: 800-643-1514 Fax: 870-234-3181 www.alumaxbath.com INSTALLATION INSTRUCTIONS 340 & 350 SERIES DELUXE FRAMELESS BYPASS BATH ENCLOSURES Copyright Alumax Bath Enclosures
More informationSawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL
SawStop T-GlideTM Fence System- Professional Series II OWNER S MANUAL Warranty SawStop warrants to the original retail purchaser of a new T-Glide Fence System - Professional Series II from an authorized
More information3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
More informationInstallation Instructions Hinged Roof Rack
Installation Instructions Hinged Roof Rack Application: Jeep Wrangler Unlimited 2004 - Current Part Number: 41435-01 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More information3 Dynatel M Series Locating and Marking System DOCUMENT NEW- TO- THE- WORLD TECHNOLOGY OBSOLETE DAMAGE PREVENTION PIN- POINT ACCURACY SAFETY
3 Dynatel M Series Locating and Marking System NEW- TO- THE- WORLD TECHNOLOGY PIN- POINT ACCURACY SAFETY DAMAGE PREVENTION Introducing the 3M Dynatel M-iD Series Locating and Marking System. NEW TECHNOLOGY
More informationBy SP Partners, LLC. INSTALLATION GUIDE. ProTech
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech IMPORTANT - READ THIS FIRST Inspect stair for any damage
More informationInstallation Instructions Factory Style Bow Kit
INSTALLATION TIME Installation Instructions Factory Style Bow Kit SKILL LEVEL Vehicle Application: Jeep Wrangler JK 2 Door 2007 Current Part Number: 55000 Compatible with original equipment soft tops,
More informationHSMT-1 Hanging System Kit
HSMT-1 Hanging System Kit Hangs MTH-1 s and MTL-1 s in either horizontal or vertical configurations Simple installation using common tools Description The HSMT-1 hanging system kit provides a certified
More informationTop Mount. See Installation 2 on page 2
INSTALLATION INSTRUCTIONS TOILET SEAT Thank you for selecting American Standard the benchmark of fine quality for over 00 years. To ensure this product is installed properly, please read these instructions
More informationSelect Lab Fixed Height Workstation
Assembly Instructions Select Lab Fixed Height Workstation Contents Important User Information.............................. 2 Safety Precautions.................................... 3 Required Tools........................................
More informationASSEMBLY INSTRUCTIONS
LEGAL DISCLAIMER: MameRoom Designs LLC will not be held liable for any incidental or consequential damages for breach of any expressed or implied warranty of the Ultimate Arcade cabinet, nor an incidental
More informationGearBoss II High Density storage
Assembly/Owner s Manual GearBoss II High Density storage contents Safety...........................................2 General......................................2 Installation...................................2
More informationSignal Integrity Product Specification
PD--0077 Signal Integrity Product Specification 3M SFP+ Passive Direct Attach Copper Cable Assembly 3 Electronic Solutions Division Page: 1 of 9 Table of Contents 1.0 Scope... 4 2.0 Product Tested... 4
More information9 QUICK RELEASE WOODWORKING VISE
9 QUICK RELEASE WOODWORKING VISE 94386 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA
More information738 SERIES PIVOT SHOWER DOOR
INSTALLATION INSTRUCTIONS 738 SERIES PIVOT SHOWER DOOR Copyright Alumax Bath Enclosures 1997. All rights reserved. Page 1 of 8 LIMITED WARRANTY AND REMEDY Alumax Bath Enclosures warrants to its dealers,
More informationVista SCREEN. and Double Door Link Kit. Installation Manual for. For Double Doors (French Doors) Quick and Easy to Size and Install
and Double Door Link Kit Installation Manual for Vista SCREEN TM Quick and Easy to Size and Install For Double Doors (French Doors) Durable. Reliable. Attractive. For door openings up to 72 13 /16 (1,849
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationScotchlok UR2 Connector
Scotchlok UR2 Connector Technical Report July 2001 80-6104-1674-7-B Contents: 1.0 Background...1 2.0 Description...1 3.0 Test Program Overview...2 4.0 Connection Stability...2 4.01 Stress Relaxation...3
More informationSS/SW3230RTA Assembly Instructions Ready to Assemble Multimedia Lectern
650 Anthony Trail, Suite D, Northbrook, IL 60062 Phone: (800)267-5486 Fax: (800)267-5489 www.ampli.com - info@ampli.com SS/SW3230RTA Assembly Instructions Ready to Assemble Multimedia Lectern Thank you
More informationINSTALLATION GUIDE OUTDOOR CABINETRY
INSTALLATION GUIDE OUTDOOR CABINETRY BEFORE YOU BEGIN IMPORTANT NOTES Always wear gloves and safety glasses when handling and installing aluminum cabinetry. Patio surfaces are typically uneven and may
More informationroom essentials >> assembly instructions Drawer dresser w/ door Video instruction as Help to assembly, scan the QR code and see the video.
room essentials 4 Drawer dresser w/ door DPCI # 249-05-0418 (Black Woodgrain) DPCI # 249-05-0419 (Virginia Walnut) >> assembly instructions 92380 Video instruction as Help to assembly, scan the QR code
More informationSecurity Products & Services...That Never Sleep. Sur-Lock. I/O 2000L Family of Exit Control Alarm Locks. Installation Instructions
Security Products & Services...That Never Sleep Sur-Lock I/O 2000L Family of Exit Control Alarm Locks Installation Instructions IMPORTANT It is important that you read and follow these instructions carefully.
More informationPutsch Meniconi Vertical Scale Instructions
Putsch Meniconi Vertical Scale Instructions Please note this installation kit is designed solely for installation on Putsch Meniconi Vertical Panel Saws, vertical measurement. Accurate Technology manufactures
More informationCOMPETITOR WM-203 COMBO BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier COMPETITOR WM-203 COMBO BENCH Assembly Instruction Exploded Diagram Parts List
More informationInstallation Procedures Maserati Gran Turismo Sport SNS 85
Installation Procedures 2012-2017 Maserati Gran Turismo Sport SNS 85 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.
More informationGB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler
Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00 Contents Weight Limit... 2 Warning Statements... 2 Installation Tools...
More informationInstallation Procedures For Corvette Basic/C-6 SNS 28
Installation Procedures For 2005-2013 Corvette Basic/C-6 SNS 28 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.
More information15 Planer Stand. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
15 Planer Stand Model 96316 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information#27541 Mobile Laptop Charging Station
1 #27541 Mobile Laptop Charging Station Assembly Instructions #27541 Mobile Laptop Charging Station Part Drawing Description Qty Part Drawing Description Qty Hardware List P-1 Left Leg Welded 1 EA A Phil
More informationInstallation Procedures 2015 Corvette C-7 Z06 With Carbon Fiber Kit SNS 50a
Installation Procedures 2015 Corvette C-7 Z06 With Carbon Fiber Kit SNS 50a Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your
More information