Mirror Kit Wide Screen

Transcription

1 Mirror Kit Wide Screen MKT-150WS / MKT-200WS MKT-250WS / MKT-265WS Mounting instructions

2 Safety instructions: Check the unit for damages caused by transport. In case of damage please report directly to the transporter and Audipack to provide a quick solution. Read the manual carefully before installing. Use the touch trolley table only on level floors. Always block the wheels before use. The Mirror Kit Wide Screen version weighs ca Kg. Please install the system with at least two installers. Take suitable safety measures when mounting the system (e.g. a working platform, a prop). Never install the product on more weight than it is allowed. Unplug before maintenance works. Please keep this manual for later use.

3 Index Table of Contents 1 General features (Algemeen) Specifications Technical data Scope of delivery Accessories Required for installation Mounting experiences Mounting the product compact Preparations for ceiling mounting Connecting the MKT Connecting the PCB External control Mounting the projector Adjusting the projector Maximum dimensions of the projector Fine adjustment the mirrors Small mirror The main mirror in opened position Ceiling frame connected to ceiling Custom finishing Ceiling frame connected to Mirror Kit Dimensions and illustrations I

4 Package of contents 1 General features (Algemeen) A projection system to place the projector over the ceiling, out of sight. The image is projected through an electrically driven mirror. 2 Specifications 2.1 Technical data Primary power supply 100~240 VAC Hz External power supply 24 VDC 2,5A (included) The projector must be mounted with an additional Audipack projector mount Suitable for wide screen 16:9-16:10 projectors Max. allowed lens ratio from aprox. 1.3:1 Max. projection distance 9-10 meters 2.2 Scope of delivery (1X) Mirror Kit Wide Screen (1X) Ceiling Finishing Mask (1X) Manual (1X) Power supply (1X) Power cable (EU) of (UK) Model: Ceiling Finishing Mask MKT-150WS MKT-200WS MKT-250WS MKT-265WS Pagina 4 van 29

5 Package of contents 2.3 Accessories (1X) Audipack projector mount 39. (1X) IR receiver (1X) Internal IR remote control set (incl. 2x AAA 1,5V battery) (1X) Internal RF remote control set (incl. 2x AAA 1,5V battery) (1X) Rotary wall switch Pagina 5 van 29

6 Mounting tools 3 Required for installation For the installation of the lift you need at least the following mounting tools: Om het product te kunnen installeren heeft u minimaal de volgende gereedschappen nodig: drill boormachine drill bit spiraalboor spirit level waterpas screwdriver schroevendraaier ring spanner ringsleutel ceiling fixing plafondbevestiging hand saw handzaag infrared measure infrarood meetlint 3.1 Mounting experiences Please install the system with at least two installers. Never use damaged devices. Before mounting the system check the specifications on the lable with those of the local power supply. Do all mounting and maintenance works with the power supply switched off. Installeer het systeem met minstens twee installateurs. Gebruik nooit beschadigde apparaten. Graag alvorens de specificaties op het etiket van het systeem controleren en de stroomvoorzieningen. Zorg ervoor dat het systeem niet op het lichtnet is aangesloten bij het schoonmaken en het onderhouden van het systeem. Pagina 6 van 29

7 4 Mounting the product compact 4.1 Preparations for ceiling mounting Model: MKT-150WS MKT-200WS MKT-250WS MKT-265WS A ± mm ± mm ± mm ± mm Pagina 7 van 29

8 Before mounting the system check the technical drawing of the model for the mounting holes. Graag alvorens de technische tekening van het systeem controleren betreffende de montagepunten. Pagina 8 van 29

9 5 Connecting the MKT Cable input Power supply 24 VDC 2,5A Cable input Pagina 9 van 29

10 5.1 Connecting the PCB : Direction keys (ref. page 12) - DOWN (open), COM en UP (close): Connect to 2 separate relays (or optional wall Switch ) Verbind deze connector met een 2 aparte relais uitgangen (of optionele muurschakelaar ) Use the dip switch (1.1) on the PCB for selecting auto run after pulse contact. 2: Limit Switch - Service 1, 2: not applicable - Down limit 1, 2: Connected to the mirror open switch Aangesloten op spiegel open schakelaar - Up limit 1, 2: Connected to the mirror closed switch Aangesloten op gesloten spiegel schakelaar 3: Con1 (power supply) volt (GND) - +24V - Loop (Option for safety switch) 2 3 Pagina 10 van 29

11 4: Motor - M+/M- Is connected to the motor of the MKT Is aangesloten op de motor van de MKT 4 5: Optional IR / RF remote control IR remote control set IR afstandsbedienings set RF remote control set RF afstandsbedienings set (read remote instructions for setting up) Replacing loop for a safety stop The loop connection can be replaced by a safety stop or emergency switch. Remove the loop completely to disconnect the power from the control board. De aansluiting van de loop kan worden vervangen door een noodstop. Bij het verwijderen van de loop, koppelt het los met de spanning van besturingsprint. Pagina 11 van 29

12 5.2 External control Pagina 12 van 29

13 Pagina 13 van 29

14 Model A B MKT-150WS 410 ±1 mm 440 ±1 mm MKT-200WS 415 ±1 mm 485 ±1 mm MKT-250WS 415 ±1 mm 475 ±1 mm MKT-265WS 475 ±1 mm 560 ±1 mm Pagina 14 van 29

15 Model A B MKT-150WS mm mm MKT-200WS mm mm MKT-250WS mm mm MKT-265WS mm mm Pagina 15 van 29

16 Pagina 16 van 29

17 Keep in mind that the weight is more important than the recommended dimensions. Model A B MKT-150WS 500 mm 500 mm MKT-200WS 500 mm 600 mm MKT-250WS 500 mm 600 mm MKT-265WS 500 mm 600 mm Pagina 17 van 29

18 Pagina 18 van 29

19 Pagina 19 van 29

20 Pagina 20 van 29

21 6 Mounting the projector Pagina 21 van 29

22 6.1 Adjusting the projector 6.2 Maximum dimensions of the projector Pagina 22 van 29

23 6.3 Fine adjustment the mirrors Small mirror Pagina 23 van 29

24 6.3.2 The main mirror in opened position 1. Do not remove the red sealed nut! 2. Raw adjustment of the mirror (α). Release the 2 small screws on the rodnut and slide it to the correct position when the mirror is in approximate end position. Fasten the 2 small screws after setting. 1. Release to adjust. Do not remove! 2. Fine adjustment (<α). Release the small Philips screw to adjust the limit switch of the main mirror in opened position, by turning the Hex bolt left or right. The end switch will set the right position. When tested and approved, fasten the Philips screw again. Pagina 24 van 29

25 6.4 Ceiling frame connected to ceiling 6.5 Custom finishing 6.6 Ceiling frame connected to Mirror Kit Pagina 25 van 29

26 Pagina 26 van 29

27 Controller Important to know: 1. When the power is cut of, an back on again, the Mirror-Kit wil automatically go to opened position. In this position the Mirror-Kit is going to zero position. The Mirror-Kit can be used normally after this setting. 2. When the positions keys 1 & 2 are being used, the Mirror-Kit will automatically go to that position. Be carefull with tools and hands etc when the mirror is operated. 3. The mirror can be cleaned with a bit warm water or glass cleaner with a soft cloth. Pagina 27 van 29

28 Technical data 7 Dimensions and illustrations Model A B C D Max. Load MKT-150WS 523 mm 491 mm 368 mm 620 mm 15 Kg MKT-200WS 563 mm 501 mm 418 mm 660 mm 15 Kg MKT-250WS 553 mm 502 mm 468 mm 650 mm 20 Kg MKT-265WS 638 mm 560 mm 500 mm 733 mm 35 Kg Pagina 28 van 29

29 Audipack s general conditions of sales and delivery apply to all of Audipack s deliveries. These conditions can be downloaded from Audipack s website, or will be send by post on request. Audipack liefert ausschließlich unter die allgemeine Verkauf- und Lieferungsbedingungen von Audipack. Diese Bedingungen sind zum downloaden verfügbar auf die webseite von Audipack, oder werden Ihnen auf Anfrage per Post gesendet. Alle leveringen geschieden uitsluitend volgens de Algemene Verkoop- en Leveringsvoorwaarden van Audipack. Een afschrift hiervan kunt u downloaden van de website van Audipack, of wordt u op aanvraag gestuurd per post. Les conditions de Vente et de livraison de Audipack sáppliquent à tous les livraisons de Audipack. Cette conditions sont disponible sur le site internet de Audipack, où seront envoyé par poste sur demande. AUDIPACK Industriestraat GT Moerkapelle The Netherlands Tel: +31(0) Fax: +31(0) audipack@audipack.com Audipack reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such damages.