Process description R-M Procedure DIAMONT. Special paint system for the Nissan GT-R, colour KAB
|
|
- Helen Clarke
- 5 years ago
- Views:
Transcription
1 Process description R-M Procedure DIAMONT. Special paint system for the Nissan GT-R, colour KAB Substrates - original OEM paint Nissan Required products - PK 700 / PK 900 / PK EUROXY CP - Ground coat - Blending clear - DIAMONT KAB colour - SUPREMELUX CP Safety instructions It cannot be ruled out that these products contain particles < 0.1 µm. The products are suitable for professional use only. For the use of these products please adhere to the actual safety recommendations and the personal protective equipment. Edge to edge repair 1.1 Application of surfacer / Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and old paintwork with P240). Clean with PK Apply EUROXY CP according to EUROXY CP technical information. Apply EUROXY CP for excellent durability performance. 1) Sand surfacer with a dual action sander P500. 2) Sand with dual action sander P600 to cover the sanding mark of P500. 3) Sand with dual action sander P800 to cover the sanding mark of P600. 4) Sand with dual action sander P1000 to cover the sanding mark of P800. 5) Degrease with PK700 Note: If the rough surface of primer filler remains, it will result in a scaly appearance If the sand-scratch marks of P500, P600 or P800 remains, it will affect the surface quality by mottling or telegraphing the sand-scratches Use guide coat prior to sanding to avoid over sanding. Use guide coat prior to sanding, then sand until it disappears in order to confirm that the sanding mark of the prior process does not remain. Use soft inter face pad for orbital sander. The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. R-M Automotive Refinish Paints, Z.I.du Merret F Clermont de l'oise Cedex, Tel. +(33) (0) , 02/2013 Side 1 of 6
2 1.2 Application of ground coat Formulation of ground coat: 8.7 g BC g BC g 5.0 g 60% by vol g Flash-off: 15 min. at 20 C For ground coat, apply wet coat to avoid generating peel on the surface. Allow the total dry time to expire in order to avoid creating a scaly surface. 1.3 Application of blending clear Formulation of blending clear: BC 100 For ground coat, apply wet coat to avoid generating peel on the surface. After dry time has expired allow part to cool to room temperature before applying KAB base coat. 1.4 Application of KAB colour Formulation of KAB: KAB-colour Application: 5 6 flash off until mat after each coat For KAB base coat, apply medium coat. Apply 2 3 mist coats after hiding has been achieved. Allow the total dry time to expire in order to avoid creating a scaly surface. Side 2 of 6
3 1.5 Application of SUPREMELUX CP Mixing ratio: SUPREMELUX CP 300% by vol. H 420 SC 820 Spray gun: mm HVLP Application: 1 2 Drying: 30 min. at 60 C On a vertical surface, apply 1 normal coat followed by a wet coat On a horizontal surface, apply 2 coats to ensure a smooth surface. The drying time is 60 C (surface temperature) 30min. Side 3 of 6
4 Spot-Repair 2.1 Application of surface / Pre-treatment Clean with PK 700 or PK 900. Sand (steel with P80, aluminium with P150-P180, galvanised steel and old paintwork with P240). Clean with PK Apply EUROXY CP according to EUROXY CP technical information. Apply EUROXY CP for excellent durability performance. 1) Sand surfacer with a dual action sander P500. 2) Sand with dual action sander P600 to cover the sanding mark of P500. 3) Sand with dual action sander P800 to cover the sanding mark of P600. 4) Sand with dual action sander P1000 to cover the sanding mark of P800. 5) Degrease with PK700 Note: If the rough surface of surfacer remains, it will result in a scaly appearance. If the sand-scratch marks of P500, P600 or P800 remains, it will affect the surface quality by mottling or telegraphing the sand-scratches. Use guide coat prior to sanding to avoid over sanding. Use guide coat prior to sanding, then sand until it disappears in order to confirm that the sanding mark of the prior process does not remain. Use soft inter face pad for orbital sander Side 4 of 6
5 2.2 Application of blending clear (1) Formulation blending clear: BC 100 For blending clear, apply wet coat. After dry time has expired allow part to cool to room temperature before applying KAB base coat 2.3 Application of KAB colour (1) Formulation of KAB: KAB-colour 60% by vol. Application: 3 4 flash off until mat after each spray coat Pressure: 1,0 1,5 bar For KAB base coat, apply medium coat. Apply 2 3 mist coats after hiding has been achieved. Allow the total dry time to expire in order to avoid creating a scaly surface. 2.4 Application of blending clear (2) Formulation blending clear: BC 100 Flash-off: / Before the mist coat of KAB base coat, apply a wet coat of blending clear on the blending area to avoid overspray mist. Side 5 of 6
6 2.5 Application of KAB colour (2) Formulation of KAB : KAB-colour 60% by vol. Application: 2 3 flash off until mat after each coat Pressure: bar 2.6 Application of SUPREMELUX CP Mixing ratio: SUPREMELUX CP 300% by vol. H 420 SC 820 Spray gun: mm HVLP Application: 2 Drying: 30 min. at 60 C On a vertical surface, apply 1 normal coat followed by a wet coat On a horizontal surface, apply 2 coats to ensure a smooth surface. The drying time is 60 C (surface temperature) 30min. Side 6 of 6
Process description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB
Process description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB Substrates - original OEM paint Nissan Required products - PK 700 / PK 900 / PK 1000 / PK 2000 - EUROXY CP
More informationSYSTEM INFORMATION Glasurit 55 Line procedure
1. Edge to edge repair 1-0 Process description Paint system with improved surface hardness for Nissan GT-R with Line 55. 1-1.Application of surfacer Apply 801-72 according to 801-72 technical information.
More informationSoak a cloth with SC 850 and wipe over a sand-through.
Process description High-quality refinishing process suitable for long-lasting restorations of classic cars in professional body shops, using the R-M base- clear coat systems. Substrates - Steel - Galvanised
More informationnax Urethane Primer Surfacer Zitan
Description Quick-drying two-pack wet on wet primer surfacer and sanding primer filler with excellent application and sanding properties. Helps to reduce process time due to its wide application window
More informationnax K Premium Primer
Description Premium quality, high build multi grey shade fast drying, 2K sanding primer filler with excellent application and sanding properties. Due to its fast ambient drying, it helps to reduce process
More informationnax Pro LV3601/03/05 VHS Primer Surfacer
Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Express Surfacer 5250. Permasolid HS Express Surfacer 5250 is a high-grade, productive, VOCcompliant 2K HS sanding surfacer based on acrylic resins. Very good application
More informationProduct Information PRIMA D839 2 Component Primer
GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Diamond Clear Coat 8450. Permasolid HS Diamond Clear Coat 8450 is a VOC-compliant High Solid clear coat. It is used to repair vehicles which in production line are coated
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Diamond Clear Coat 8450. Permasolid HS Diamond Clear Coat 8450 is a VOC-compliant High Solid clear coat. It is used to repair vehicles which in production line are coated
More informationPermasolid HS Premium Surfacer 5310
Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Automotive Top Coat 275. Permasolid HS Automotive Top Coat 275 is a High-Solid top coat system for solid colours. It is used for passenger car finishes. The comprehensive
More informationPrimer / Primer Surfacer
Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer
More informationPermasolid HS Vario Surfacer 8590
Permasolid HS Vario Surfacer 8590 GENERAL DESCRIPTION A high quality acrylic surfacer from our 2K-Acryl-System for partial and full passenger car refinishes. Its versatility enables application at both
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationTechnical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY
100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..
More informationGen2O - Environmentally Friendly
Waterborne Automotive Basecoat: Go for Gen2O and build a future for your business that makes cents. Gen2O is user friendly and cost effective. The transition from conventional to Gen2O is easy. Only minor
More informationProduct Information FILLERS
GLOBAL REFINISH SYSTEM February 2010 Product Information FILLERS PRODUCTS Galvaplast 77 - Multi Purpose Polyester A656 Multi Purpose A722 - Flexible Polyester Putty - Standard Polyester A1 - Polyester
More informationProduct Information Deltron D894 High Solids Clear
GLOBAL REFINISH SYSTEM May 2012 Product Information Deltron High Solids Clear PRODUCTS Deltron HS Clear Deltron HS Hardeners D897, D8208 Deltron MS Hardener D803, D841, D861, D864 Deltron Thinners D808,
More informationFull Product Name. Products. Properties. 2K Etch Primer. Type of Product Description
Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion
More informationE380 and E381 Epoxy Primer
Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationBETACORD offers its partners a product manufactured from the best raw materials using the most-up-to-date equipment.
Dear partners! We are proud to introduce a new European brand of abrasives and accessories BETACORD. BETACORD offers its partners a product manufactured from the best raw materials using the most-up-to-date
More informationTechnical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY
4 3505-002 1 3505-105 0.5 3505-204 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationApplication and Repair of Autobase Plus Red Tri-Stage Colors
Description Sikkens Autobase Plus Ready Mix (RM) Groundcoat and Midcoat are a unique color package that requires a specialized blend of pigments and toners designed to provide a color match for FA12:RR.
More informationPercoTop PUR 2K MS Topcoat
Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint
More information8-746 High Production Non-Sanding Primer Grey GS907
8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged
More informationPercoTop 449 2K Structure Topcoat
Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop
More informationCyclanon Washoff XC-W New
Technical Information TI/T Asia Nov 2007 Page 1 of 6 = Registered trademark of BASF SE Universal after soaping agent for the removal of reactive dye hydrolysate or unfixed direct dye from dyeings on cellulosic
More informationPainting Pitched Roofs
4 Tutorial 4 Painting Pitched Roofs Tile & Galvanized Iron Paint Academy Determining your product requirement: Measure area to which paint is to be applied. Depending on surface to which the product is
More informationMarch 2009 Product Information RAPID GREYMATIC 2K Filler
GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,
More information2 : % VOC-compliant clear 2 : % Clear Mixing ratio 100% by vol Film thickness: µm.
Application: Drying accelerator for Glasurit standard clears (VOC-compliant and non-voc-compliant), Line, Line VOC, VOC MC600, and 85- HS-Primerfiller / Filler Properties: Reduction of drying times Improves
More informationmm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application
Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and
More information23 rd International Enamel Congress Monday May 25 th 2015
23 rd International Enamel Congress Monday May 25 th 2015 New coatings for the functionalization of enamelled surfaces Giovanni Baldi Enamel is an extremely heat and abrasion resistant coating, able to
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationMay 2012 Product Information GRS Deltron D800
GLOBAL REFINISH SYSTEM May 2012 Product Information GRS Deltron Clear PRODUCTS Deltron Clear Deltron Medium Solids Hardeners D803, D841, D861 Deltron Accelerated Medium Solids Hardener D864 Deltron Standard
More informationJanuary 2007 Product Information DELTRON D821
GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.
More informationSystem Data Sheet. Blending. This Data Sheet describes how to blend Permasolid HS clear coats and Permasolid HS Automotive top coats 275.
System Data Sheet. Blending. This Data Sheet describes how to blend Permasolid HS clear coats and Permasolid HS Automotive top coats 275. General blending process Blending dark colors Usage: speed repairs
More informationHP Epoxy Primer P
Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy
More informationFOR PROFESSIONAL USE ONLY
100 3506-001 20 3599-104 40 3506-204 3505-205 23 Description: High performance, fast drying two-pack non-sanding filler or sanding filler. The target use for this product is refinishing and refurbish of
More informationUse suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.
Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The
More informationCOLLISION REPAIR INFORMATION
COLLISION REPAIR INFORMATION FOR THE TOYOTA DEALER TITLE: PAINT GUIDE AND REPAIR PAGE 1 of 8 PROCEDURES SECTION: REFINISH BULLETIN #53 MODELS: ALL DATE: FEBRUARY 1994 The following information includes
More informationProduct Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description
Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically
More informationAutobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015
Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be
More informationHigh-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.
Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding
More informationUHS Duralit Extra Tinters series 150
2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum
More informationSELECTION AND PREPARATION OF SUBSTRATES
592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates
More informationAutowave 3 Stage Application and Repair
Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels
More informationProduct Data Sheet November 2016
Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationProduct Information DP5000
GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range
More informationHP Chromate Free Epoxy Primer P /-4505/-4510
Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free
More informationDid I say that proper cleaning is important? I am going to start this module off with that.
PREPARATION It All Starts Here Featheredging, Masking, Primer, Block Sanding, Final Sanding One of the most important, or perhaps the most important, things you need to do when painting a car is to properly
More informationVELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981
VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 VELOX PLUS TECHNICAL INFORMATION Please read all information and application instructions before beginning. Coverage Estimates Normal
More informationCOLLISION REPAIR INFORMATION
COLLISION REPAIR INFORMATION FOR THE TOYOTA DEALER TITLE: PAINT GUIDE AND REPAIR PROCEDURES PAGE 1 of 8 SECTION: REFINISH BULLETIN #48 MODELS: ALL DATE: SEPTEMBER 1992 This bulletin provides information
More informationProduct Data Sheet August 2006 (Updated in December 2014)
Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey
More informationProduct Data Sheet May 2006
Product Name/Product Code H4530 Product Data Sheet May 2006 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K Single Layer Solid Colour System Medium Solids Product Description P420-2K Solid Colour Mixes
More informationPaint Problems and Solutions Guide. Endura Manufacturing Co. Ltd th Street Edmonton, Alberta T5L 2J
Paint Problems and Solutions Guide Endura Manufacturing Co. Ltd. 12425 149th Street Edmonton, Alberta T5L 2J6 1-800-661-9930 www.endura.ca Table of Contents Paint problems are easy to spot, but in many
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,
More informationMarine. Paint Specification: November ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS
Marine ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS ::Below the Water Line:: System 1 Fiberglass Substrate Pre Treatment Degreaser 10 Additional Requirements Keep surface wet for 5 to 10
More informationTECHNICAL DATA SHEET 9008B0900D. Desothane HD 9008B0900D Buffable Clear Coat. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description Desothane HD is a buffable clear coat intended to be used over Desothane HD 9008 Basecoat. can also be used as a buffable clear coat over pigmented polyurethane
More informationProcess Data Sheet January 2015
Process Data Sheet January 2015 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY J1005V TCB100 - Aquabase Plus Clean Vivid Ruby Special Concentrate P190-1005 EMEA Product Description P190-1005 Clean Vivid
More informationMarch 2013 Product Information GRS Deltron BC
GLOBAL REFINISH SYSTEM March 2013 Product Information GRS Deltron BC Basecoat colour PRODUCTS Deltron Basecoat Tinters Deltron Xirallic Special Effect Tinters Deltron Thinners Deltron BC Fade-out Thinner
More informationJuly 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear
GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst
More informationGRIP-GARD BC Translucent For Professional Use Only
Description Grip-Gard BC uses a specially blended binder which converts Grip-Gard BC toners into a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted quickly
More informationBC Translucent uses a specially
Grip-Gard BC Translucent Description Technical Data Sheet October 2013 Topcoat Grip-Garinto a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted BC Translucent
More informationP Waterborne Primer-Surfacer-Grey
PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot
More informationPUTTIES
CATALOGUE PUTTIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - FILLERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 CLEAR COATS - - - - - - - - - - -
More informationJuly 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear
GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst
More informationApply a high gloss color coat: LV650 Topcoat or LV650 Basecoat per TDS. Flash a minimum of 20 minutes before LV650 LumiCoat High Gloss application
Description Autocoat BT LV650 Infuse LumiCoat is a high gloss, two-component polyurethane topcoat that offers the ability to add reflectance or brilliance to any Autocoat BT LV650 color. LumiCoat is part
More information20th ANNUAL SKILLS MANITOBA COMPETITION PAINT COMPETITON COMPETITION DESCRIPTION
20th ANNUAL SKILLS MANITOBA COMPETITION PAINT COMPETITON COMPETITION DESCRIPTION Break down of Students into 2 groups of 8 competitors maximum 4 Secondary and 4 Post- Secondary (2 ½ hour time blocks morning
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationVolume Solids %
Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint
More informationSEA45 Water Borne Acrylic Gloss
Water Borne Acrylic Gloss TECHNICAL DATA SHEET Product Description Components is a single pack, general purpose gloss finish. Applicable by brush or spray. Fast drying Water based, low VOC Excellent weather
More informationDuPont Plas-Stick 2332S Low VOC Adhesion Promoter
Description Plas-Stick 2332S is a Low VOC gray pigmented adhesion promoter for polyolefin or non-polyolefin unprimed automotive plastics. When combined with proper surface preparation, this product enhances
More informationPaint and Decals. Adequate ventilation is required when working in a confined area with paint and paint-related chemicals.
Service Guide Paint Repair Paint and Decals Utilimaster recommends that a professional body shop do all paint repairs. The service technician should read this entire procedure before working on the vehicle.
More informationSandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value
Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationRongalit Discharge D
Technical Information TIe/ EU July 2011 (10/ 2010) Page 1 of 6 (WJA) Replaces all previous editions Europe = Registered trademark of BASF in several countries Rongalit Discharge D Previously Decrolin Reducing
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V PRIME Acrylic Urethane Surfacer P 238 DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable
More informationHow to use a Touch Up Bottle & Brush
How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss
More informationSetamol Disperse ws. Technical Information. Universal, anionic dispersing agent for dyes, and protective colloid. TI/T June 2011 Page 1 of 5
Technical Information TI/T June 2011 Page 1 of 5 = Registered trademark of BASF SE Setamol Disperse ws Universal, anionic dispersing agent for dyes, and protective colloid TI/T June 2011 Page 2 of 5 Setamol
More informationReliable solutions with optimised performance
Reliable solutions with optimised performance 3M innovation provides quality you can count on in a full line of premium engineered abrasives and convenient all-purpose abrasive products for use in stock
More informationAerodur 3001 Base Coat Special Effects
Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001
More informationSATAminijet 4400 B. Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories. For high precision work
SATAminijet 4400 B Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories For high precision work SATAminijet 4400 B Brilliance in Miniature The SATAminijet 4400 B is the perfect
More informationTechnical Information
Technical Infrmatin P997-LA05 Liquid Aluminum 2 used in repair prcess f Nissan KAB Super Silver TCB101 The fllwing prcess utlining the repair f Nissan KAB Super Silver paint scheme has been apprved by
More informationHelizarin Binder TOW Plus
Technical Information TI/T Asia June 2011 Page 1 of 6 = Registered trademark of BASF SE Helizarin Binder TOW Plus Acrylic binder for pigment printing. The prints are fast to dry cleaning, have a pleasingly
More informationXtreme. Premium Refinishing. Same body, different aircaps. Revolutionary air distribution system. Perfect mechanisation without joints
CATALOGUE Premium Refinishing Same body, different aircaps New High-end Aluminium Aircaps for MS, HS, Waterborne and HVLP. Revolutionary air distribution system Carried out at the tip of the air cap, it
More informationPRODUCTS. INDUSTRY Sector. Repair and Maintenance
PRODUCTS INDUSTRY Sector Repair and Maintenance Philosophy Table of contents SprayMax Technology - Made in Germany The evolution of the spray can technology began in the 1920s. Initially only registered
More information