(med filtad sula) 1. DESCRIPTION APPLICABLE DOCUMENTS PRODUCT REQUIREMENTS MANUFACTURING... 8

Transcription

1 1(12) M Knästrumpor stålgrå (med filtad sula) Knee socks steel grey (with felted sole) Table of contents 1. DESCRIPTION APPLICABLE DOCUMENTS PRODUCT REQUIREMENTS MANUFACTURING TABLE OF MEASURES, KNEE-SOCKS QUALITY ASSURANCE PACKING INSTRUCTIONS Confirmed: Date: Helena Lundberg Product manager Quartermaster materiel

2 2(12) 1. DESCRIPTION Knee socks, steel-grey with felted sole. The socks are manufactured in combed yarn, rib knitting in leg and upper foot part. Terry knitting in heel, sole and toe of non-anti-shrinkage treated combed yarn. The yarn composition is 75% wool and 25% polyamide. The size marking to be knitted with a different colour at the top edge of the leg. The knitting with anti-shrinkage treated yarn in combination with non-antishrinkage treated yarn as well as milling of the ready-made socks results in a felted sole, heel and toe while the upper part and the leg remains elastic. Elastic thread in the leg of the socks. The socks are made in 5 sizes, (8-12)

3 3(12) 2. APPLICABLE DOCUMENTS For documents mentioned in this Technical Specification, issues which are current at the time of the enquiry will apply. 2.1 EN ISO 6330 Domestic washing and drying procedures for textile testing 5. Washing procedure Table 1: Machine Type A Procedure 5A, 40 C 8. Drying procedure 8.5 Tumble dry 2.2 EN ISO 5077 Determination of dimensional change in washing and dying 2.3 EN ISO 105-C06 Colour fastness to domestic and commercial laundering Two single-fibre adjacent fabrics 6. Test No A1S, 40 C 4.4 b) ECE Detergent 2.4 EN ISO 105-E04 Colour fastness to perspiration Two single-fibre adjacent fabrics 2.5 EN ISO 2062 Yarn from packages Determination of single-end breaking force and elongation at break 2.6 ISO 1833 Binary fibre mixtures 2.7 ISO 4915 Stitch types - Classification and terminology 2.8 EN ISO 9001 Quality management systems Requirements. Permissible exclusions: Sub- clause 7.3: Design and development. 2.9 Öko-Tex General and special conditions Standard 100 Product class II

4 4(12) The colour in the Technical Specification refer to the Pantone Colour System A model will be supplied by FMV in connection with the FMV production briefing to the appointed manufacturer. In the case of any difference between the model and this Technical Specification, the Technical Specification shall take precedence. If any documentation supplied by FMV should seem incorrect, FMV must be informed about this. No drawings or specifications may be altered without the agreement of FMV.

5 5(12) 3. PRODUCT REQUIREMENTS 3.1 General 3.2 Colours: The workmanship must conform to the industry standard for the manufacture of quality goods as described below. Material provided by the supplier must be of the quality as required below and must be approved by FMV before being used. a) Steel grey: Guideline for the steel grey colour: Pantone TCX The colour to be in acc. to the model. b) Guideline for the colours of size marking: Size Colour: Pantone Textile Colour: 8 yellow TCX 9 blue TCX 10 red TCX 11 green TCX 12 brown TCX 3.3 Yarn The socks are made of two different types of yarn, anti-shrinkage treated yarn in the whole sock and non-anti-shrinkage treated yarn in the heel, sole and toe. Both types of yarn to be combed. The composition of the yarns to be 75 % wool + 25 % staple polyamide. Tolerance ± 3 % units, acc. to ISO The yarns to be dyed in tops. The wool and polyamide fibre to be blended before spinning Anti-shrinkage treated yarn (whole sock) Wool quality: Virgin wool with fibre diameter of 24.2 ± 0.8 μm. Yarn number (basic value): 33 x 2 tex (Nm 30/2) Non-anti-shrinkage treated yarn (heel, sole and toe) Wool quality: Virgin wool with fibre diameter of 24.2 ± 0.8 μm. Yarn number (basic value): 45 tex (Nm 22).

6 6(12) Staple polyamide: Fineness 3.3 ± 0.2 dtex (3.0 ± 0.2 denier) Staple length 95 mm ± 15 mm Properties for the yarn: Requirements: Test method: Colour fastness to washing 4 EN ISO 105-C06 Colour fastness to perspiration 4 EN ISO 105-E Elastic thread (in the leg) Elastane fibre (e.g. Lycra, type 146), spun with textured polyamide in the colour of the sock. Elasticity up to 300% without being damaged. Elastane fibre Textured PA Yarn no: 156 dtex (140 den) 78 dtex (70 den) 3.5 Thread for toe-closing: Colour: Steel grey colour same shade as the socks. Machine seam: 78 dtex x 2 (70 den x 2) - alternatively 44 dtex x 2 (40 den x 2) textured polyamide or polyester Properties: Requirements: Test method: Colour fastness to washing 4 EN ISO 105-C06 Colour fastness to perspiration 4 EN ISO 105-E Coloured yarn for size marking: Material and properties acc. to alternatively: a) 70 % wool 30 % acrylic or b) 100 % acrylic Properties: Requirements: Test method: Colour fastness to washing 4 EN ISO 105-C06 Colour fastness to perspiration 4 EN ISO 105-E04

7 7(12) 3.7 Shrinkage-control treatment The wool to be shrinkage-control treated in tops, in a method which does not damage the wool fibre. The method to be specified in the tender. 3.8 Dimensional change The shrinkage after one wash, in acc. with clause 2.1.The shrinkage of the sock to be maximum 6 %. The upper part of the sock leg shall both before and after washing be possible to stretch at least 200 mm without being damaged. 3.9 The requirements in Öko-Tex Standard 100, Product class II, to be fulfilled for the ready-made socks Marking The size marking to be knitted on the upper edge of the sock leg acc. to the colours in clause The size marking to be done with 4 courses in the upper part of the sock leg using anti-shrinkage treated coloured yarn Packing The socks to be folded in pairs and packed in bundles, 10 pairs in each. Each bundle to contain one size only. The bundles to be packed in accordance with packing instructions in this specification.

8 8(12) 4. MANUFACTURING 4.1 Machine: 4.2 Knitting: 4" - 4, 5", needles. The leg to be rib-knitted 1:1 and the upper part of the foot to be rib-knitted 3:1. High heel, heel, sole and toe to be plain knitted with terry inside. The top part of the leg to have 4 welt-knitted courses. The elastic thread to be inserted in every second course. The sock to be knitted in two systems: The whole sock to be knitted in both systems with two threads of combed antishrinkage treated yarn (Nm 30/2). By means of an extra yarn pilot an elastic covered yarn to be inserted into the first system in the leg. In the high heel, heel, sole and toe a non-anti-shrinkage treated combed yarn, Nm 22/1 to be added. This yarn forms loops both in- and outside of the sock. The inside loops are knitted in terry structure. The terry loops to be knitted in each course in the foot part. 4.3 Toe-closing: Machine-sewn with 1-needle, 2-thread overlock, stitch type 503, acc. to ISO Number of stitches: 11 stitches/10 mm. The seam-width on the wrong side to be 5-6 mm when the sock toe is stretched in width. The endings of the seam chain to be 10 mm long. The terry loops are not to be sewn in the seam, but to be placed 1-2 courses away from the seam. 4.4 Finishing: The socks to be delivered washed, milled and formed.

9 9(12) 5. TABLE OF MEASURES, Knee-socks Plane measurements in mm (guiding value) for washed and formed socks Size Colour A B C D 8 yellow blue red green brown A Number of courses (guiding value) for washed and formed socks Size A B C D Weight in gram ±7% B C D

10 10(12) 6. QUALITY ASSURANCE Supplier's Commitments The supplier shall establish and maintain an effective quality system that meets the requirements of EN ISO 9001, Quality management systems - Requirements. Permissible exclusion: Sub-clause 7.3, Design and development. The supplier shall provide FMV*, in good time before the start of production, with reference samples and material together with documents according to a, b, c, d, and e, listed below. The requirements in this Technical Specification must be fulfilled. a) Reference samples from the production plant where the actual production is placed: 2 pairs of socks in each size b) Test report from an independent laboratory, accredited to perform test methods required in this specification, for: Colour fastness to washing ready-made socks Colour fastness to perspiration ready-made socks Dimensional change acc. to clause 3.7 Öko-tex standard 100, class II ready-made socks and/or yarn acc. to clause 3.2 d) Technical data sheet, showing that the product fulfils the requirements, for: All material, data sheet from the manufacturer of the yarn and the elastic band e) - yarn, two cones with original readable labels - coloured yarn for size marking, one cone in each colour with readable labels - elastic thread, one cone with readable label or 10 m FMV assesses and approves the received material. Buyer's Quality Control FMV reserves the right to review the supplier's quality system and to make manufacturing and quality inspections during the current period of contract in a way that FMV considers suitable. * ADDRESS: FMV: FMgem prod, SE Stockholm, Sweden

11 11(12) 7. PACKING INSTRUCTIONS 7.1 Ordering of packing The order must be in writing and sent to: FMCL, Styrmansgatan 14, ARBOGA, SWEDEN. To state: - number of the current order, eg. LB-number - stock-number and stock-designation - desired number of boxes - number of labels per size FMCL encloses the adequate number of sealing tape required for the ordered number of boxes. 7.2 Spare packing 7.3 Types of cardboard boxes Terms for different boxes Size (mm) L x W x H The above mentioned packing shall be used exclusively in connection with the current order. Any spare packing shall be returned to FMCL, Styrmansgatan 14, ARBOGA, SWEDEN. fmlog-forsl-fmcl@mil.se. Suppliers failing to do so will be charged for the spare packing items. No. of readypacked boxes/ pallet No. of folded boxes, bundled/ pallet Sizes (mm) of bundled boxes incl. height of pallet Weight (kg) bundled boxes incl. pallet No. of folded boxes/ bundle, tied up K2M M x400x x1200x Number of products per cardboard box Type of box: Number: Stock-number: Stock-designation: K2 60 M Knästrumpa stålgrå/ Knee socks steel grey 7.5 Information about the quality of the cardboard boxes The boxes are extra thick and specially treated for piling up and storing during longer times. 7.6 Sealing tape M The cardboard boxes shall be sealed with the supplied sealing tape in such a way that the labels are not concealed. The bottom of the boxes shall be sealed with a lengthwise sealing tape both on the inside and outside of the box. Figure Information about the quality of the sealing tape The sealing tape is to be wet with water in order to get affixed The sealing tape is specially treated to protect the products against damp and other damages.

12 12(12) 7.8 Packing Boxes not filled up N.B. More than one size in each cardboard box is not allowed. If all of one size does not fill up the whole of a box, the vacant space shall be filled up with other suitable materials. This filling must not generate dust or otherwise be detrimental to its contents. Exceptions, if any must be approved by FMV. Type of pallets 7.9 Marking Pre-printed data Figure 2. Data filled in by the supplier Position of the two labels The cardboard boxes shall be loaded on EUR pallets, 800 x 1200 mm. The pallets to be in perfect condition. The boxes shall be secured on to the pallet. The supplier shall free of charge supply the requisite number of pallets. Deliveries without required pallets will be replaced with new pallets. The extra cost will be charged the contractor. a) Stock-number (FBET) b) Stock-designation (FBEN) c) Number d) Size e) Number of the order f) Date of packing g) In exceptional cases, FMV may allow deviation from the stipulated number of pieces in the boxes in written form. In such cases both the bar-code and the figures are to be crossed out. The actual number of pieces shall then be indicated with a felt pen on the label. Figure 2. To facilitate the end-user's scanning, please attach the labels evenly over the corresponding box print. Figure 1. Figure 1. Labels Sealing tape both on the inside and outside of the box FBEN X X X X X X Figure 2. FBET M ANTAL STORLEK SAMMANF FBET M BEST NR LB00000 FÖRP.DAG År Mån Dag År = Y e a r M å n = M o n th D a g = D a y År = Year Mån = Month Dag = Day See packing instruction 6.1 Fill in