MULTI CONNECTION SYSTEM. Product Overview

REFLOW TECHNOLOGY. Product Overview

REFLOW TECHNOLOGY Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.

Reflow Technology Product Overview

Reflow Technology Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.

PCB Terminal Blocks Product Overview

PCB Terminal Block Product Overview The Entire Product Range Type: Pin pacing: Terminal block, terminal trip (double-, triple-, quadruple-deck terminal trip), diconnect terminal block for tet and meaurement,

EPSITRON Electronic Circuit Breakers Compact and Precise ECBs for DC Circuits

EPSITRON Electronic Circuit Breakers Compact and Precise ECBs for DC Circuits WHY SECONDARY-SIDE FUSE PROTECTION? On the secondary side, switchedmode power supplies provide DC voltage to control circuit

EPSITRON Advanced Power Supply System Innovations

EPSITRON Advanced Power Supply System Innovations EPSITRON COMPACT POWER Technical Data L H W Item Number 787-1202 787-1212 Nominal input voltage 100... 240 VAC 100... 240 VAC Input voltage range 90...

WINSTA The Connection System. Full Line Catalog 2010/2011

WINSTA The Connection System Full Line Catalog 2010/2011 5 WAGO Registered Trademarks CAGE CLAMP CAGE CLAMP @ POWER CAGE CLAMP FIT CLAMP PUSH WIRE TOPJOB TOPJOB @ WINSTA WAGO X-COM X-COM @ JUMPFLEX TO-PASS

ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks

ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks 221 SERIES LEVER-NUTS The Next Generation of Compact Splicing Connectors 221 SERIES LEVER-NUTS The Difference is Clear:

Operating tools. with partially insulated shaft Type 1, 2 and 3 in set

Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement

Setting Standards Connectors M 16

Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and

VARIOCON. Modular Contact Inserts

Modular Contact Inserts 1. Short The modular contact inserts are based on the triedand-tested COMBICON technology. They are available with the screw connection system and on the equipment side also as

Through and Ground Conductor Terminal Blocks 290 Series

11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"

POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )

POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s success.

Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header

Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple

Tools for crimp contacts

Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered

Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount

Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.

POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )

POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s success.

Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount

Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.

EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE

EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:

gesis MINI 2, 3 and 5 pole

2 gesis MINI 2, 3 and 5 pole Application example General Electronic components become increasingly smaller. Consumer devices become smaller and the electrical connection must therefore become smaller,

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying

HARTING Han GND. People Power Partnership

98 42 937 0201 HARTING Han GND People Power Partnership Han GND - Mateable Potential Equalization The new Han GND series now enables pluggable grounding systems Han GND (Han Ground) is the innovative HARTING

Current / residual current and voltage transformers. Current / residual current and voltage transformers

Current / residual current and voltage transformers Current / residual current and voltage transformers 1 Overview Current transformer overview DIN rail current transformer with fuse Current transformer...

221 Series LEVER-NUTS. Compact Splicing Connectors for all Wire Types

221 Series LEVER-NUTS Compact Splicing Connectors for all Wire Types Overview General description Value proposition Target markets Features / Advantages / Benefits Variants / Types Product Features at

EPSITRON Advanced Power Supply System. High-Performance Meets High-Efficiency

EPSITRON Advanced Power Supply System High-Performance Meets High-Efficiency WAGO EPSITRON Advanced Pages 4-9 EPSITRON PRO Power Single- and three-phase power supplies with a wide input voltage range and

sealed mini usb connectors

QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

Current and Energy Measurement Technology Efficiency Is That Easy! Product Overview

Current and Energy Measurement Technology Efficiency Is That Easy! Product Overview Content WAGO Energy Management 4 Current Transformers Selection Guide 8 Power and Energy Measurement 10 Voltage Taps

Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique

General characteristics and technical data Series VarioPro Basic

General characteristics and technical data Series VarioPro Basic Series Electrical values Operating voltage (DC) Test voltage (DC) 8 kv 12 kv Housing HV- 1-2 Insulation material Flammability class POM

Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES

Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................

SIGNAL // POWER // INDUSTRIAL ETHERNET

CIRCULAR CONNECTORS SIGNAL // POWER // INDUSTRIAL ETHERNET 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric and heating areas. The medium

MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM

MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such

ma. JUMPFLEX 857 Series. Transducers / Relay and Optocoupler Modules

0 0 ma 0 V...0 ma JUMPFLEX Series Transducers / Relay and Optocoupler Modules JUMPFLEX Series A Complete Product Line is Available, Bringing Each Signal into Shape. The perfect match of housing and electronics

HQ series the powerful little connectors

HQ series the powerful little connectors HQ series the powerful little connectors A small size ut quite ig. The electrical values speak for themselves. The HQs use the proven HE and HD crimp contacts as

The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications.

The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications. Shield (Screen) Connecting System VOLUME 1 Shield (screen) connecting system

Switching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay

relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);

HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02

Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...

FRONT 2,5-H/SA 5. Extract from the online catalog. Order No.:

Extract from the online catalog FRONT 2,5-H/SA 5 Order No.: 1700008 PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions: 1, Type of connection: Screw connection,

FLAT CABLE HEADERS WITH LONG LATCHES SERIES P [ 8536 ] BOX HEADERS SERIES P [ 8536 ] BOX HEADER (LOW PROFILE) SERIES P [ 8536 ]

FLAT CABLE HEADERS WITH LONG LATCHES SERIES P [ 8536 ] NO. OF WAYS STRAIGHT TERMINALS RIGHT ANGLE TERMINALS 10 Way PH10SL2P 13.75 PH10AL2P 14.75 14 Way PH14SL2P 15.75 PH14AL2P 17.00 16 Way PH16SL2P 16.75

P3-19 Series Connectors For Entertainment Lighting

Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully

711 Series Single Way DB-1a

711 Series Single Way DB-1a Data Bus Interconnection System Data Bus Interconnection System designed for data transmission as defined by MIL-STD-1553B, STANAG 3838 and DEF STAN 00-18 (Part 2). This system

78-Way D-type Connector Accessories

-Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type

MCR-SL-CUC Universal current transducer. Data sheet _en_05. 1 Description

Universal current transducer Data sheet 104059_en_05 PHOENIX CONTACT 2011-03-09 1 Description MCR-SL-CUC-...-I and MCR-SL-CUC-...-U active current transducers convert DC, AC, and distorted currents into

HE Insert Series. Application Specification Apr 26 th, 2016 Rev. A. Table of contents

HE Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2

Feed-through terminals

s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS

Specifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21

M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded

ELCO Series 8005/8015 A KYOCERA GROUP COMPANY

Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is

242, , FAX.

TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz

Automation and Network Solutions. Entertainment in Series Round Connectors by HIRSCHMANN.

Automation and Network Solutions Entertainment in Series Round Connectors by HIRSCHMANN. The competition is going to the very ends of the earth. For some time now, the best deals are no longer limited

Assembly Instructions for Power Drawer Series 35 amp and 75 amp

Assembly Instructions for Power Drawer Series 35 amp and 75 amp These assembly instructions include the instructions for wire termination, contact insertion, contact removal, PCB mount, and panel mounting

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6

KDS10/SO. Extract from the online catalog. Order No.:

Extract from the online catalog KDS10/SO Order No.: 1704059 The figure shows a 5-pos. version of the product PC terminal block, Nominal current: 76 A, Nom. voltage: 630 V, Pitch: 10 mm, Number of positions:

1/4" and 3.5 mm Phone Plugs

N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned

PRODUCT SPECIFICATION

MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed

VersaBlade Wire-to-Wire Connection System

VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering

Tools for other contacts Tools for FOC contacts Crimping machine TC-C Crimping machine TK-M

Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han-Yellock... 99.06 for contacts Han C... 99.09 for contacts D-Sub... 99.11 for other contacts... 99.12 for FOC contacts...

OVERVIEW MINI / PANEL MOUNT TERMINALS

OVERVIEW INTRODUCTION SCREW CLAMP TECHNOLOGY Screw clamp & Spring Clamp Technology versions Extremely Compact wiring solution 15mm Mini Rail Terminals Modular easy snap together Terminals High Temperature

IDC Terminal. Wire-to-Board Solution ED Full-scale IDC Terminal AWG 22. Catalog E

Wire-to-Board Solution Full-scale IDC Terminal AWG 22 ED. 02 10.2015 Catalog E 074615 OVERVIEW GENERAL Surface mount IDC Terminals The very compact IDC Terminals enable highly reliable wire-to-board connections

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X

The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product

BKA 2,5 M 3 M 2,5 M 3 M 4. Feed-through terminal 2 connectors. Screw connection technology. 22 x 5 x 23

s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS

Measuring current transformers of the W, W series

Measuring current transformers of the W, W -8000 series W(-8000)_D00078_01_D_XXEN/09.2015 Measuring current transformers of the W, W -8000 series Product description The highly sensitive W and W -8000

MKDS 3/ 4. Extract from the online catalog. Order No.:

Extract from the online catalog MKDS 3/ 4 Order No.: 1711042 PC terminal block, Nominal current: 24 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 4, Connection method: Screw connection, Mounting:

WELDING POSITIONER PARTS BREAKDOWN DRAWING GP-200

WELDING POSITIONER PARTS BREAKDOWN 10 DRAWING GP-200 1 GP-200-001 FRAME 1 2 GK-160-012 5/16"-18UNC x 5/8" CARRIAGE BOLT 6 3 GK-136-055 5/16"Ø LOCK WASHER 6 4 GK-109-052 5/16"-18UNC HEX NUT 10 5 GP-200-002

Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00

Components Pole desig. Coding Design Part number Connector, screw Device connector M25, screw Device connector M20, screw, straight

Product overview Components Pole desig. Coding Design Part number Connector, screw Female 1,2,3,N, PE light gray 6-10 mm 96.051.4053.0 1,2,3,N, PE black 96.051.4053.1 1,2,3,4,5 brown 96.051.4053.4 L,N,PE,+,-

JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.

M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations

Wireless DMX. Lux Lumen bvba Kernenergiestr. 53a 2610 Wilrijk T F Wireless DMX - page 1.

Wireless DMX 10075 Wireless DMX - page 1 Preface Thank you for choosing this Wireless DMX module. This device sends or receives wireless DMX data. Contents PCB Layout p3 Placement p4 Connectors P4 Supply

Accessories. Accessories

Accessories Accessories Voltage transformer Voltage transformer Powerful and precise Input, 3-pole Output is 3-pole + N Use in IT networks without neutral line For reducing the measurement voltage for

Hand Crimp Tool Specification Sheet Order No

Hand Crimp Tool Specification Sheet Order No. 63811-2600 FEATURES TYPE 4A % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed soft handles % Precisely designed crimping

Han High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!

Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6

SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3

C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations

SECTION 7 R114 / R115 / R116 / R117 / R112

SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead

Installation Instructions for Cirrus Suspension Downlight with Power - End Feed. Section One: 4" Flush Canopy Version

Doc # 0-CSP-E_0 W. Fullerton Chicago, IL 606 Ph:.0. Fax:..6 www.pureedgelighting.com info@pureedgelighting.com 06 PureEdge Lighting. All Rights Reserved. Installation Instructions for Cirrus Suspension

STANDARD RTD's INDEX

STANDARD RTD's INDEX PAGE General Information... R2 Temperature/Resistance Table... R6 Part Numbering Examples... R10 High Temperature MgO Elements (RA)... R11 Leadwire Style RTD's (RB)... R12 Leadwire

Order Number

Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

PHOENIX CONTACT

Selective circuit breaker CLIPLINE Data sheet 100464_en_05 PHOENIX CONTACT 2009-11-17 1 Description The electronic circuit breaker, which has a design width of just 12.5 mm, selectively protects all 24

AMP Power Lock Connectors

Product Facts High current handling capability: 31 or 53 amperes maximum depending on application (reference product specs) Modular housings for multiple connector applications Assortment of mounting accessories

Terminal blocks Index

Terminal Index - Terminal SNK terminal....1.72 General information Features and benefits...1 -.3...4 Marking solutions...5 Panorama...6 -.7 Ordering details ZS4 Screw terminal...8 ZS6 Screw terminal...9

MC 1,5/ 4-ST-3,5. Extract from the online catalog. Order No.:

Extract from the online catalog MC 1,5/ 4-ST-3,5 Order No.: 1840382 The figure shows a 10-position version of the product Plug component, Nominal current:, Nom. voltage: 160 V, Pitch: 3.5 mm, Number of

PHOENIX CONTACT

Electronic circuit breaker CLIPLINE Data sheet 102898_en_03 PHOENIX CONTACT 2010-12-17 1 Description The electronic circuit breaker can be used in applications that cover all aspects of the switched-mode

HARTING Han-Power T Solutions

HARTING Han-Power T Solutions Fields of Application HARTING industrial connectors are suitable in a wide variety of electronic and electrical applications. Power utilities Robotics Machine tool controls

Arducopter 3DR-B Hardware

Arducopter 3DR-B Thank you for purchasing an Arducopter 3DR kit. The Arducopter 3DR is a stable and supported quadrotor frame in the ongoing development of the Arducopter code on DIYDrones. It features

Feed-Through & Multi-Connection Spring Clamp

Feed-Through & Multi-Connection Spring Clamp FEED-THROUGH CSC2.5T CSC4T CSC6T These terminal blocks offer a time saving alternative to the popular screw clamp connection. They can be mounted on 3 DIN rails.

ModulLine MP 25. System overview. 1 Chain bracket. 2 Strain relief. Chain bracket flexible. Frame bridge RS-ZL. STF Steel Fix

ModulLine MP 25 System overview 1 Chain bracket 2 Strain relief Chain bracket flexible Frame bridge RS-ZL STF Steel Fix 3 2 1 140 3 Shelving system Technical data Separator TR Loading side Inside or outside

10. Mini Coax Connectors

. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5

both pin and sleeve contacts.

The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick

Amphenol. Advantage. R-Line R-146. Rectangular Attached Multi-Pin Industrial Cable Assemblies. Amphenol - Sine Systems

Amphenol Rectangular Attached Multi-Pin Industrial Assemblies Advantage R-146 R-Line Amphenol - Sine Systems Advantage * vs. the R-Line Molded Advantage Series * Patents pending Low Cost UL & CSA Listed

Product Manual MNX10050 / REV B MODELS:

VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV B MODELS: CC-AXX & JXX CC-C2X & C3X Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description... 2 Section II

Commercial Micro-D Subminiature I/O Products

Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:

Electronic Circuit Breaker with reset input ESS20-1..

Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and

Load Cell Accessories and Services

Load Cell Accessories and Services Highlights Strain gage signal conditioners Cable assemblies Mounting accessories Calibration services PCB Piezotronics, Inc. Toll-Free in USA 888-684-0004 716-684-0001

Customer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.

Solutions for Customer Premise Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. The product range of distribution boxes offers small distribution

RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.

RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without

TERMINAL BLOCKS BARRIER

See More Online From 440+ Top Brands. BARRIER FLEXI-BLOCK CUT-AWAY TERMINAL BLOCK SYSTEM TRI-BARRIER FLEXI-BLOCK FLEXI-BLOCK FLEXI-BLOCK End Stop Standard Track Flanged Track Custom-made terminal blocks

Extract from the online catalog

Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The

Instruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)

Instruction Sheet Tool Kit 1725150 [ ] (for SL Series 110 Jack Connectors) 26 FEB 04 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

TNC SERIES General... 4 Interface... 5 Characteristics...6-7

CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...

AMPLIMITE Cable Connectors and Shielding Hardware Kits

AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering

Compatibility list DALI Sensors DALI Multi-Master Module

Compatibility list Building Automation WAGO-I/O- PRO V2.3 DALI Multi-Master Module 753-647 2 DALI Multi-Master Module 753-647 2018 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik

Standardised distribution boxes Product overview: Polyester enclosure

Standardised distribution boxes Product overview: Polyester enclosure s Standardised distribution boxes Product overview: Polyester enclosure Use the product overview to find the right solution for you!