BKA 2,5 M 3 M 2,5 M 3 M 4. Feed-through terminal 2 connectors. Screw connection technology. 22 x 5 x 23
|
|
- Beryl Hensley
- 5 years ago
- Views:
Transcription
1 s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS 32 mm with TS 35 x,5 mm Direct mounting /Colour /Colour /Colour For certifications and approvals Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories End plate AP beige blue Partition plate TW beige blue Insulation plate TRS 2 poles Outer insulated cross connector A poles 3 poles Outer insulated cross connector A poles 4 poles Outer insulated cross connector A poles 0 poles Outer insulated cross connector AQI0 poles End holder EH/Direct mounting screw Endhalter EH/Rail mounting End holder EH/Direct mounting pin Screw driver Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 2 x 6 x 2,5 RKB 4 beige 08.2/00 RKB 4 blue 08.5/00 * AP, / /50 TW, / / / /0 Q /0 EH 235.2/ / Page x 5 x 23 BKA 2,5/ beige 320.2/00 BKA 2,5/ blue 320.5/ , A/5/ /50 A/5/ /50 A/5/ /50 AQI 0/5/ /0 EH /50 EH 5/BKA 245.2/50 EH 2-Z 24.2/ / Page x 6 x 23 BKA 4/ beige 258.2/00 BKA 4/ blue 258.5/ A/6/ 225.0/50 A/6/ 226.0/50 A/6/ 240.0/50 AQI 0/6/ /0 EH /50 EH 5/BKA 245.2/50 EH 2-Z 24.2/ / Page x 8 x 3 BKA 0/ beige 4.2/50 BKA 0/ blue 4.5/ A5 V2 0, , A/8/ 206.0/50 A/8/ /50 A/8/ 206.0/50 EH /20 EH 35/BKA 246.2/ / Page 26 4
2 SRK 2,5/5 RK,5-4/5 SRK 2,5 RK,5-4 M 2,5 M 3 M 2,5 M 3 26 x 5 x 2,5 2 x 6 x 34,5 45 x 5 x 43,5 45 x 5 x 3 45 x 6 x x 6 x 43,5 SRK 2,5/5 beige 035.2/00 SRK 2,5/5 blue 035.5/ , RK,5-4/5 beige 00.2/00 RK,5-4/5 blue 00.5/00 RK,5-4/5/STB 03.2/ SRK 2,5 beige 030.2/00 SRK 2,5 blue 030.5/ , RK,5-4 beige 05.2/00 RK,5-4 blue 05.5/00 RK,5-4/STB 00.2/ AP 2,5/ / /50 TW 2,5/ / / /50 AP, / /50 TW, / / /00 AP-SR 200.2/ /50 TW 2, / /50 AP, / /50 TW, / / / / / / / /0 Q /0 Q /0 Q /0 Q / / 086.0/ 085.0/ 086.0/ Page 26 Page 26 Page 26 Page 26 5
3 s Screw connection system RK 2,5 RK 2,5/35 N/2 Q RK 2,5-4 RK 2,5-4/35 Rail mount on TS 32 / TS 35 Connection diagram M 2,5 M 2,5 M 3 M 3 Connection type Dimension (L x W x H) with TS 32 mm with TS 35 x,5 mm /Colour /Colour /Colour /Colour /Colour /Colour /Colour /Colour For certifications and approvals Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories End plate AP beige blue Partition plate TW beige blue Insulation plate TRS /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI /Insulated cross connector QI/ZQI Screw driver Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 6 48 x 5 x 5,5 48 x 5 x 4 RK 2,5 beige 26.2/00 RK 2,5 blue 26.5/00 RK 2,5 DS beige 48.2/00 ) RK 2,5 DS blue 48.5/00 ) , AP 2, / /50 TW 2, / / / /20 Q / / Page 26 ) cross connection not possible 62,5 x 5, x 4 RK 2,5/35 N/2 Q/35 beige 54.2/00 RK 2,5/35 N/2 Q/35 blue 54.5/00 RK 2,5/35 N/S/2 Q/35 beige 55.2/00 2) RK 2,5/35 N/S/2 Q/35 blue 55.5/00 2) , AP 2, / /50 TW 2,5-0 Z,5/2 30.8/50 Z,5/3 3.8/50 Z,5/4 32.8/20 Z,5/5 33.8/20 Z,5/6 34.8/20 Z,5/ 35.8/20 Z,5/8 36.8/0 Z,5/ 3.8/0 Z,5/0 38.8/ / Page 26 2) with screen rail 48 x 6 x 5,5 48 x 6 x 4 RK 2,5-4 beige 00.2/00 RK 2,5-4 blue 00.5/00 RK 2,5-4/STB beige 008.2/00 3) RK 2,5-4 DS beige 4.2/00 ) RK 2,5-4 DS blue 4.5/00 ) , ,2-6 0,2-6 2 AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI / / Page 26 3) with connector socket 48 x 6 x 4 RK 2,5-4/35 beige 5.2/00 RK 2,5-4/35 blue 5.5/ , ,2-6 0,2-6 2 AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI / / Page 26
4 RK 6-0 RK 6-0/35 RK 6 RK 6/35 N RK 35 RK 35/35 N M 4 M 4 M 5 M 5 M 6 M 6 48 x 8 x 5,5 48 x 8 x 4 48 x 8 x 4 50 x 2 x x 2 x 58,5 54 x 2 x 4 58 x 6 x 6 58 x 6 x,5 58 x 6 x 52 RK 6-0 beige 005.2/00 RK 6-0 blue 005.5/00 RK 6-0 DS beige 8.2/00 ) RK 6-0 DS blue 8.5/00 ) * A5 V2 RK 6-0/35 beige 58.2/00 RK 6-0/35 blue 58.5/ A5 V2 RK 6 beige 050.2/50 RK 6 blue 050.5/50 RK 6/IS beige 42.2/50 4) RK 6/IS blue 42.5/50 4) RK 6/Z beige 62.2/50 5) RK 6/Z blue 62.5/50 5) RK 6/Z-IS beige 43.2/50 4)5) RK 6/Z-IS blue 43.5/50 4)5) IEC UL* CSA B V2 RK 6/35 N beige 5.2/50 RK 6/35 N blue 5.5/50 RK 6/35 N/Z beige 53.2/50 5) RK 6/35 N/Z blue 53.5/50 5) B V2 RK 35 beige 052.2/20 RK 35 blue 052.5/20 RK 35/IS beige 44.2/20 4) RK 35/IS blue 44.5/20 4) RK 35/Z beige 63.2/20 5) RK 35/Z blue 63.5/20 5) RK 35/Z-IS beige 45.2/20 4)5) RK 35/Z-IS blue 45.5/20 4)5) B V2 RK 35/35 N beige 52.2/20 RK 35/35 N blue 52.5/20 RK 35/35 N/Z beige 54.2/20 5) RK 35/35 N/Z blue 54.5/20 5) B V2 0,2-0 0,2-0 0,2-0 0,2-0 0, ,2-0 0,2-0 0,2-0 0,2-0 0,2-0 2,5-6 2,5-25 2,5-6 2,5-6 2, ,5-6 2,5-25 2,5-6 2,5-6 2, ,5-6 2,5-35 2,5-35 2,5-35 2, ,5-6 2,5-35 2,5-35 2,5-35 2, AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI /0 AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI /0 AP / /50 TW / /50 22./ / /0 Q / / / /0 Q /0 AP / /20 TW /20 2.5/ / / /0 Q / / / /0 Q /0 08.0/ 08.0/ 08.0/ 08.0/ SDB,2 x 6, / SDB,2 x 6, / Page 26 Page 26 Page 26 Page 26 Page 26 Page 26 ) cross connection not possible 4) with hexagon socket screw 5) with housing pins
5 s Screw connection system RK 50 RK 5 RK 50 RK 240 Rail mount on TS 32 / TS 35 M 6 M 8 M 0 M 0 Connection diagram Connection type Dimension (L x W x H) with TS 32 mm with TS 35 x,5 mm /Colour /Colour /Colour For certifications and approvals Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories Outer insulated cross connector A poles Outer insulated cross connector A poles Cover AD Inlay profile EP Hexagon socket screw key ISKS Pick off terminal MAG 8 x 20 x 82 x 20 x 6,5 RK 50 beige 20.2/0 RK 50 blue 20.5/ /0-6 B0 V A/ /5 A/ /5 AD / / /0 ISKS / MAG /0 84 x 25 x 4 84 x 25 x 88,5 RK 5 beige 22.2/0 RK 5 blue 22.5/ /0-2 B2 V A/ /5 A/ /5 AD / /20 EP /0 ISKS / MAG /0 3 x 3 x 8,5 3 x 3 x 2,8 RK 50 beige 24.2/5 RK 50 blue 24.5/ B4 V A/ /5 A/ /5 AD / / /0 ISKS / MAG 50/ /0 3 x 36 x 32 3 x 36 x 26,3 RK 240 beige 26.2/5 RK 240 blue 26.5/ /0 B6 V A/ /5 A/ /5 AD / /20 EP /0 ISKS / MAG 50/ /0 Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! Page 26 Page 26 Page 26 Page 26 * Applies 8
6 Feed-Through Terminal Accessories RK 50 to RK 240 The terminal blocks RK 50 to RK 240 consist of a double shell insulating terminal carrier and due to the special construction of the strain-relief clamp, offer low transitional resistance between the conductor and the contact rail. A broad accessory programme effectively completes this series. Measurement Pick-Up Terminals MAG MAG measurement pick-up terminals allow the voltage to be picked up on terminal blocks with a larger cross sections by conductors with smaller cross sections from 0.2 to 0 mm 2. MAG connection elements are introduced into the respective terminal block above the mains lead-in and make contact with the contact rail through the connection screw of the main terminal block. This ingenious and safe technical solution simplifies wiring considerably. Measurement Pick-Up Terminals MAG MAG 50 MAG 5 MAG 50/240 For terminal MAG /0 IEC UL* CSA* / A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 50 MAG /0 IEC UL* CSA* / A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 5 MAG 50/ /0 IEC UL* CSA* / A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 50, RK 240 Insertion Plates EP When connecting band conductors, it is necessary to put insertion plates in the strain-relief clamps. The EPs compensate for the V-form geometry in the strain-relief clamps (terminal cage). This also affords the band conductor a safe and dependable connection. Insertion Plates EP EP 5 EP 240 For terminal 224.0/0 RK 50 EP /0 RK /0 RK 50 EP /0 RK 240
Feed-through terminals
s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS
More informationData sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationDatenblatt. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationMULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
More informationData sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationData sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationHARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
More informationData sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationWINSTA The Connection System. Full Line Catalog 2010/2011
WINSTA The Connection System Full Line Catalog 2010/2011 5 WAGO Registered Trademarks CAGE CLAMP CAGE CLAMP @ POWER CAGE CLAMP FIT CLAMP PUSH WIRE TOPJOB TOPJOB @ WINSTA WAGO X-COM X-COM @ JUMPFLEX TO-PASS
More informationThrough and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
More informationSLKK 5. Extract from the online catalog. Order No.:
Extract from the online catalog SLKK 5 Order No.: 0461018 Double-level terminal block with protective conductor foot, cross section: 0.2-4 mm², width: 6.2 mm, color: Gray Commercial data EAN 4017918002381
More informationThe shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications.
The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications. Shield (Screen) Connecting System VOLUME 1 Shield (screen) connecting system
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationPluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
More informationDatenblatt. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationDIK 1,5 General data Technical data General
General data Order number 2715966 Type DIK 1,5 Barcode number 4017918061715 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 4 Color gray Insulating
More informationThe series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties.
w TERMINALS SERIES IK6 GENERAL INFORMATION The series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties. 402 Since series terminals
More informationDatasheet. W-series terminal with clamping yoke connection WDU 16
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationEmpty enclosures AKL / AKi ITC - AKL / AKi Enclosures
4 basic enclosures up to 600 x 300 mm, with two different cover heights Box: choice of polystyrene (AKL) or glassfibre-reinforced polycarbonate, grey, similar to RAL 7035 Cover: grey (polystyrene or polycarbonate)
More informationData sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationContents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
More informationAutomation and Network Solutions. Entertainment in Series Round Connectors by HIRSCHMANN.
Automation and Network Solutions Entertainment in Series Round Connectors by HIRSCHMANN. The competition is going to the very ends of the earth. For some time now, the best deals are no longer limited
More informationMEASURE POSTS AND MARKER POSTS
MEASURE POSTS AND MARKER POSTS 1.4.3.1 Aluminium posts Measurering posts and marker posts for cathodic corrosion protection combine the latest application technology with optimal material properties. The
More informationPARTS REFERENCE LIST MODEL: M929D
Home Sewing Machine PARTS REFERENCE LIST MODEL: M929D CONTENTS (1) PRINCIPAL PARTS... 2 (2) NEEDLE BAR, FEED BAR AND PRESSER HOLDER... 4 (3) KNIFE AND LOOPER... 6 (4) LAMP, MOTOR AND ACCESSORY... 8-1 -
More informationELECTRICAL INFORMATION K012-A135-MP5.0/02 2 K012-A135-MP5.0/03 3. Molding Nylon PA66 to UL94, V-O Colour Green. Torque 3.5 lbs-in
TERMINAL BLOCKS PCB A13X series connectors have an elevator style clamping mechanism that provides for repeat wire terminations and a reliable contact. PCB A111 stype connector is Konvar's first depluggable
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More information8.3. Terminal Blocks, Fuse Blocks and Fuse Holders. Contents Description. CHDB Series Power Distribution Blocks. Power Distribution
Terminal Blocks, Fuse Blocks and Fuse Holders.3 CHDB Series Blocks, Enclosed and Open CHDB Series Blocks Product Description Features and Benefits Eaton s CHDB Series of Blocks was designed for high short
More informationSpecifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21
M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded
More informationHG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS
20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,
More informationProduct Manual MNX10050 / REV B MODELS:
VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV B MODELS: CC-AXX & JXX CC-C2X & C3X Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description... 2 Section II
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationTeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X
Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00
More informationDatasheet WPDB Power Distribution Blocks
Datasheet WPDB Power Distribution Blocks Now you can manage multiple load connections and a wide range of wire sizes with Weidmuller s Power Distribution blocks. By using the best materials and the best
More information78-Way D-type Connector Accessories
-Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type
More informationEngineering Guideline. pac-carriers Type for Yokogawa Centum VP
Engineering Guideline pac-carriers Type 9195 for Yokogawa Centum VP pac-carrier Type 9195 2 Engineering Guideline / Yokogawa Centum VP 26.0.2018 pac-carrier Type 9195 Integrated solutions for Yokogawa
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPowerpole Connectors - PP120: up to 240 Amps
Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8
More informationList of Contents. Trunking systems. Selection of surface finish. Equipotential bonding. Cable ladders. Cable trays/ luminaire rails.
List of Contents Trunking systems Ductel Twist Trunking system for electricity, telecoms and data solutions. The trunking is made of aluminium and is available with 45 mm and 80 mm openings. Plastic trunking
More informationREMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350
REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350 Productfeatures and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Forklift trucks Other DC voltage applications
More informationHigh-current terminal block - UKH
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More information05/09/2014
48 x 48 Digital LCD Timer 814 Part number 88857005 Relay output digital timers LCD or LED (815E) Multi-range Multi-voltage 1 or 2 relay outputs Reset function on panel (Timers 815, 815E) Data saved in
More informationProduct Manual MNX10050 / REV C MODELS:
VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV C MODELS: CC-AXX & JXX CC-C2X & C3X CC-V2R & V3R Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description...
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationLESLIE CONSOLE CONNECTOR KIT 7043 INSTALLATION INSTRUCTIONS
LESLIE CONSOLE CONNECTOR KIT 7043 INSTALLATION INSTRUCTIONS FOR USE WITH: LESLIE Speaker Models: 125, 225, 145, 147, 147RV, 247, 247RV WURLITZER Organ Models: 4300, 4500, 4520 MULTIPLE SPEAKER INSTALLATION:
More informationMultiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationTable of Contents. Power Distribution Blocks & Terminal Blocks with High Short-Circuit Current Ratings. Technical Assistance
Power Distribution Blocks & Terminal Blocks with High Short-Circuit Current Ratings Table of Contents Page Selection Table.... 2 Power Distribution Blocks PDBFS Series....................................3-8
More informationDigital Input Module 24 V Ex n Inputs, 16 Channels Series 9471
> 16 channels for active 0 / 24 V signals > Zone 2 / Division 2 version for connection of circuits acc. to Ex nl, Ex na, Nonincendive and Non-Ex > Galvanic separation between inputs and system > Two channels
More informationSPRING CLAMP TERMINAL
SPRING CLAMP TERMINAL Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-4132 Muttenz 1, Switzerland Phone ++41 (0)61 466 33 33, Fax ++41 (0)61 461 96 06 www.woertz.ch Woertz USA 151 Discovery Drive, Unit
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationNote: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationPremoulded cable joint SMPGB
Premoulded cable joint SMPGB 362-420 Premoulded for safe and easy installation Active pressure Reliable Joint bodies routinetested according to IEC before delivery Bolt connector technology Compact joint
More informationBrochure. SNK series Terminal blocks Screw technology
Brochure SNK series Terminal blocks Screw technology SNK series Terminal blocks Screw technology Rely on our expertise ABB screw clamp technology benefits from years of experience. Billions of our screw
More informationTwo-channel safety barriers Series 9002
Two-channel safety s Series 00 > Wide product range for all standard applications of the automation > Flexible and space-saving available in single and double channel versions > Time-saving installation
More informationThe STRIKE Connector System
I N D U S T R I A L The STRIKE Connector System The STRIKE Connector System The STRIKE Connector System is designed for heavy duty equipment. It combines technical know how of DEUTSCH in connectors with
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationTwo-channel safety barriers Series 9002
Two-channel safety s Series 00 > Wide product range for all standard applications of the automation > Flexible and space-saving available in single and double channel versions > Time-saving installation
More informationGeneral data. Technical data DIKD 1,5. General. Dimensions
General data Order number 2715979 Type DIKD 1,5 Barcode number 4017918061722 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 6 Color gray Insulating
More informationDatasheet WPDB Power Distribution Blocks
Datasheet WPDB Power Distribution Blocks Now you can manage multiple load connections and a wide range of wire sizes with Weidmuller s Power Distribution blocks. By using the best materials and the best
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationFeed-Through & Multi-Connection Spring Clamp
Feed-Through & Multi-Connection Spring Clamp FEED-THROUGH CSC2.5T CSC4T CSC6T These terminal blocks offer a time saving alternative to the popular screw clamp connection. They can be mounted on 3 DIN rails.
More informationAC-3 AC-1 230V 400/415V 500V 690V 115V 230V 200V 230V 460V 575V N.O. N.C. Qty. Cat. No. Screw Terminals. Spring Clamp Terminals. 40 C Pkg.
Bulletin -K, -K IEC Miniature Contactors Overview/Product Selection Product Selection -Pole AC- and DC-Operated Contactors Bulletin -K/-K IEC Miniature Contactors Compact size Same dimensions for AC and
More informationACCESSORIES. Type No. of poles Item Part No. Performance. Contact arrangement 1 Form C 2 Form C Max. continuous current (Ambient temperature:
ACCESSORIES HN RELAYS (Sockets and DIN rail s) TYPES Type No. of poles Item Part No. PC board DIN rail Standard packing: Carton: 0 pcs.; Case: 00 pcs. Note: Certified by UL/C-UL -pole HN PC board AHNA3
More informationPage 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationBulletin 1492 Spring-Clamp Connection Terminal Blocks Introduction
Bulletin Introduction The Allen-Bradley Line of Spring-Clamp Terminal Blocks The Bulletin -L line of internationally approved spring-clamp IEC-style terminal blocks offers a variety of products that can
More informationINSTALLATION INSTRUCTIONS TRI-ROOF. energy for a better world
energy for a better world INSTALLATION INSTRUCTIONS TRI-ROOF The flexible roof integration system Compatible for framed module types* Simple exchange of modules Replaces existing roofing Special profiles
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationLoad Cell Accessories and Services
Load Cell Accessories and Services Highlights Strain gage signal conditioners Cable assemblies Mounting accessories Calibration services PCB Piezotronics, Inc. Toll-Free in USA 888-684-0004 716-684-0001
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationTHT TYPE. Interface unit with built-in DO module FEATURES
INTERFACE UNIT THT TYPE FEATURES Both and DO modules of the THT type interface unit have the same structure, providing a smart appearance. The connector sockets and operation indicators are located at
More informationClick here. For machines from 2009 onward; Batch No. 08N2505 or later (PO No or later & PO No. s ending in -EU): (Model No.
For machines from 2009 onward; Batch No. 08N2505 or later (PO No. 95333 or later & PO No. s ending in -EU): (Model No. -B) Click here (Model No. ) Click here 1 P a g e For machines from 2009 onward; Batch
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS40 MIXER ML-134476 ML-134477 ML-141002 FORM 43182 Rev. A (April 2014) F-43182 Rev. A (April 2014) - 2-2014 Table of Contents 5 CONTROL PANEL 7 ELECTRICAL COMPONENTS 9 ATTACHMENT
More informationProduct features and advantages
Product features and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Other DC voltage applications Operating voltage determined by housing color Simplifies
More information3RH1 contactor relays, 4- and 8-pole
Siemens AG 2010 RH, TH Contactor Relays RH1 contactor relays, 4- and 8-pole Overview AC and DC operation IEC 60947, EN 60947. The RH1 contactor relays are suitable for use in any climate. They are finger-safe
More informationShort-circuit-proof switching amplifier for inductive loads up to 10 A
MICROOPTO Overview Short-circuit-proof switching amplifier for inductive loads up to 10 Powerful, compact solid-state relay with error signalling contact The MICROOPTO family offers the customer high-quality
More informationMeasuring current transformers of the W, W series
Measuring current transformers of the W, W -8000 series W(-8000)_D00078_01_D_XXEN/09.2015 Measuring current transformers of the W, W -8000 series Product description The highly sensitive W and W -8000
More informationPARTS LIST GALAXY DS FLOOR MACHINE
PARTS LIST GALAXY DS FLOOR MACHINE ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL - GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1 105 0393441 HANDLE
More informationSingle-Channel Safety Barriers with Electronic Current Limitation Series 9004
Single-Channel Safety Barriers with Electronic Current Limitation > Broad product range for all standard applications in the world of automation > Flexible and space saving > Time saving installation due
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS30 MIXER ML-134462 ML-134463 FORM 43181 Rev. A (April 2014) F-43181 Rev. A (April 2014) - 2-2014 Table of Contents 5 CONTROL PANEL 7 ELECTRICAL COMPONENTS 9 ATTACHMENT HUB
More informationTerminal blocks Index
Terminal Index - Terminal SNK terminal....1.72 General information Features and benefits...1 -.3...4 Marking solutions...5 Panorama...6 -.7 Ordering details ZS4 Screw terminal...8 ZS6 Screw terminal...9
More information535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
More informationWelcome to TESLA Jihlava
HYPCON CONTACTS Welcome to TESLA Jihlava Praha D1 Rozvadov (Műnchen) Jihlava Znojmo (Wien) Brno COMPANY PROFILE TESLA Jihlava, a.s. - a joint-stock company - is one of the largest Czech manufacturers of
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More informationTechnical data. Standards: IEC/EN thermoplastic Protection class: IP 67 to EN Termination: cable LiYY 2 x 0.25 mm 2, length 1 m
B 6,5 3,5 4 44 33,5 13 4 00 Flat design on-contacting principle 1 Reed contact ctuating distance up to 60 mm depending on actuating magnet and version ctuating surface marked by protrusion Pre-wired cable
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationSiemens AG Allows easy and consistent configuration with one series of overload relays (for small to large loads)
Overview Features Benefits 3RU11 3RB20/3RB21 3RB22/3RB23 Sizes Are coordinated with the dimensions, connections S00...S3 S00... S12 S00... S12 and technical characteristics of the other devices in the
More informationCustomer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.
Solutions for Customer Premise Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. The product range of distribution boxes offers small distribution
More informationMESA-HPX. Assembly and Installation Manual. w/appendix A for Prodelin Antenna. 901-Manual-MESA-HPX
MESA-HPX Assembly and Installation Manual w/appendix A for Prodelin Antenna 901-Manual-MESA-HPX Rev 30 March 2011 2 INDEX Installation Cautions 4 Installation Pole Height Orientation of the Mount on the
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, without net brackets, in ground sockets
Assembly instruction Cat.-no.: 113 6526 Sport-Thieme Handball Goal 3x2 m, without net brackets, in ground sockets Thanks for choosing Sport-Thieme equipment! In order to enjoy this product please note
More informationSH Series: DIN Rail Snap-Mount Sockets. SH1B Sockets " (17mm) 0.172" (4.4mm) 0.216" (5.5mm) Ø 0.140" (3.6mm) 2.613" (67mm) 2.
SHB SHB-05 5-blade, snap-mount/surface mount (Coil) M3 screws/(contact) M3.5 screws with captive wire clamp 250V, 0A RHB SY2S-02 0.3" (4.4mm) 0.26" (5.5mm) 0.663" (7mm) 2.63" (6mm) 0.780" (20mm) 4 5 9
More information