Lamp Parts. H - 1 Order Toll-Free Fax Toll-Free Internet:
|
|
- Julianna Cole
- 6 years ago
- Views:
Transcription
1 Die Cast Loops These loops are available in a variety of finishes. Just add the letters after the loop number to obtain the finish you want Die Cast Finials These finials are available in a variety of finishes. Just add the letters after the finial number to obtain the finish you want ABR...1 Female Loop, Antique Brass ACP...1 Female Loop, Antique Copper BLK...1 Female Loop, Black BPL...1 Female Loop, Bright Brass NKL...1 Female Loop, Nickle PWT...1 Female Loop, Pewter ABR...1 ½ Female Loop, Antique Brass ACP...1 ½ Female Loop, Antique Copper BLK...1 ½ Female Loop, Black BPL...1 ½ Female Loop, Bright Brass NKL...1 ½ Female Loop, Nickel PWT...1 ½ Female Loop Pewter ABR...Fancy Loop, Antique Brass ACP...Fancy Loop,Antique Copper BLK...Fancy Loop, Black BPL...Fancy Loop, Bright Brass NKL...Fancy Loop, Nickel PWT...Fancy Loop,Pewter ABR...Decorative Loop, Antique Brass ABR...Baroque Loop, Antique Brass ABR...Victorian Loop, Antique Brass ABR...Classic Loop, Antique Brass ABR...Large 2 Loop 1/8F ABR...Screw Collar Loop wiring 1/8F (3/8 diam.) ACP...Screw Collar Loop wiring 1/8F (3/8 diamrl BLK...Screw Collar Loop wiring 1/8F (3/8 diam.) BPL...Screw Collar Loop wiring 1/8F (3/8 diam.) NKL...Screw Collar Loop wiring 1/8F (3/8 diam.) PWT...Screw Collar Loop wiring 1/8F (3/B diam.) WHT...Screw Collar Loop wiring 1/8F (3/8 diam.) ABR...Small Pyramid Finial, Antique Brass ACP...Small Pyramid Finial, Antique Copper BPL...Small Pyramid Finial, Bright Brass NKL...Small Pyramid Finial, Nickel PWT...Small Pyramid Finial, Pewter ABR...Sm Pyramid Knob 1/8F ABR...Sm Pyramid Knob -27F BPL...Sm Pyramid Knob -27F ABR...Large Pyramid Finial, Antique Brass ACP...Large Pyramid Finial, Antique Copper BPL...Large Pyramid Finial, Bright Brass NKL...Large Pyramid Finial, Nickel PWT...Large Pyramid Finial, Pewter ABR...Lg Pyramid Knob 1/8F w/pull Chain Hole ABR...Lg Pyramid Knob 1/4-27F Fits Harp Post BPL...Lg Pyramid Knob 1/4-27F Fits Harp Post ABR...Acorn 1/8F ABR...Pineapple 1/8F ABR...Bud Finial1/8F, Antique Brass ACP...Bud Finial1/8F, Antique Copper BPL...Bud Finial1/8F, Bright Brass NKL...Bud Finial1/8F, Nickel PWT...Bud Finial1/8F, Pewter ABR...Classic 1/8F BPL...Classic 1/8F ABR...Large Classic 1/8F ABR...Pagoda 1/8F ABR...Flame l/8f BRZ...Flame 1/8F H - 1 Order Toll-Free
2 Lamp Parts Steel Locknuts, Washers & Rubber Washers Solid Brass Loops UNF Female Loop l/8f UNF Male Loop 1/8M UNF Colonial Loop l/8f UNF ¾ Colonial Loop l/8f UNF ½ Colonial Loop 1/8F UNF.... Fancy Loop l/8f Reducers UNF.... Shoulder Reducer -27F X 1/8M UNF.... 9/16 Hex Nut 1/8 thick i/8 IP UNF.... 9/16 Hex Nut 3/6 thick 1/8 IP UNF /16 Hex Nut 1/8 thick ¼ IP UNF.... ¾ Hex Nut ¼ thick ¼ IP BPl..... Steel Washer 5/8 diam slip 1/8 IP UNF.... Steel Washer 5/8 diam slip 1/8 IP BPL.... Steel Washer ¾ diam slip 1/4 IP UNF.... Steel Washer ¾ diam slip 1/4 IP UNF.... Steel Washer 1 diam slip 1/8 IP UNF.... Steel Washer 1 diam slip 1/4 IP BlK..... Rubber Washer 5/8 diam slip 1/8 IP BlK.... Rubber Washer ¾ diam slip 1/8 IP BlK..... Rubber Washer 1 diam slip 1/8IP UNF.... Headless Reducer -27F X 1/8M Solid Brass Finials, Caps and Knobs UNF.... Sm Pyramid Knog 1/8F ABR.... Med Pyramid Knob 1/8F UNF.... Lg Pyramid Knob 1/8F UNF.... Acorn 1/8F UNF.... Classic 1/8F UNF.... Ball Knob 1/8F UNF Colonial Finial1/8F ABR.... Mushroom Knob 1/8F UNF.... Mushroom Knob 1/8F ABR.... Knurled Cap 1/8F NKL.... Knurled Cap 1/8F UNF.... Knurled Cap 1/8F ABR.... Knurled Knob ¼ -27F (fits harp post) ABR.... ¾ diam Brass BaIl 1/8F UNF.... ¾ diam Brass Ball 1/8F ABR diam Brass Ball 1/8F UNF diam Brass Ball 1/8F Plated Steel Nipples 1/8 IP ½ zinc plated nipple /8 zinc plated nipple ¾ zinc plated nipple zinc plated nipple ¼ zinc plated nipple ½ zinc plated nipple ¾ zinc plated nipple zinc plated nipple ¼ zinc plated nipple ½ zinc plated nipple zinc plated nipple zinc plated nipple zinc plated nipple zinc plated nipple Thread Sizes: ¼ -27 IP measures ¼ diameter and is the thread size used on the tops of harps. Finials are usually tapped ¼ -27 IP. but are also available in 1/8 IP. 1/8 IP measures 3/8 in diameter and is the thread size that fits into ordinary lamp sockets. REMEMBER that 1/8 is a LARGE hole and ¼ -27 is a SMALL hole. Order Toll-Free H - 2 rburke@bellnet.ca
3 Wall Fixture Plate Package Cross Bars and Hickeys Wall Lamp Fixture - The fixture will simply simply hang on the with the support bar of any wall lamp hanging from it. Your lamp will be safe and secure, with nothing detracting from it. The unit can be wired into the wall or plugged into an electrical socket UNF /8 Steel tap 1 /8 IP UNF /8 Steel tap 1/8 IP UNF /8 Offset - Steel 2 3/4 c to c UNF /4 Steel tap 1/4 IP UNF /8 Steel tap 1 /4-27 fits harp post UNF /8 Steel 360º swing UNF....1 Steel hickey tapped 1/8F x 1/8F UNF....2 Steel hickey tapped 1/8F x 1/8F Brass support and stabilizer bar Brass support and stabilizer bar Brass support and stabilizer bar. Spiders UNF....7 Brass 3-way Spider Swag Kits UNF....7 Brass 4-way Spider NOTE: You can use a metal saw (hacksaw), heavy duty side cutting pliers or bolt cutters to cut the spiders to size for the lamp you are making. Each kit contains all the parts needed to hang a lamp Black swag lamp kit Brass swag lamp kit Copper swag lamp kit Antique Brass swag lamp kit Nickel swag lamp kit Ball Shades & Holders Opal Ball Shade 6 diameter, 3 ¼ fitter Opal Ball Shade 8 diameter, 4 fitter BPL....Brass Shade Holder 3 ¼ fitter (to fit ) BPL....Brass Shade Holder 4 fitter (to fit ) Machine made with the inside sprayed white Cords, Plugs and Switches ft. brown cord with plug ft. gold cord with plug ft. brown cord with inline switch Fan lamp electrical BRN....Male plug, brown Gilbert in-line switch, brown Gilbert in-line switch, black Gilbert in-line switch, ivory Gilbert in-line switch, white H - 3 Order Toll-Free
4 Shade Risers Lamp Parts Heavy Duty Harps (con t.) Shade riser ½ solid brass Shade riser ¾ solid brass Shade riser 1 solid brass Shade riser 1 ½ solid brass Shade riser 2 solid brass The harp size is stamped on the underside of the top ABR....8 heavy duty harp ACP....8 heavy duty harp BPL....8 heavy duty harp NKL....8 heavy duty harp BPL....8 ½ heavy duty harp BPL....9 heavy duty harp BPL....9 ½ heavy duty harp BPL heavy duty harp BPL ½ heavy duty harp BPL heavy duty harp 2 - Piece detachable harp The harp size is determined with both pieces put together 6 Sided 8 Sided Light Duty Harps ABR....4 light duty harp Just a reminder: ACP....4 light duty harp ABR= Antique Brass BPL....4 light duty harp ACP= Antique Copper NKL....4 light duty harp BLK= Black 80Q-2599ABR....5 light duty harp BPL= Brass Plate ACP....5 light duty harp BRZ= Bronze finish BPL....5 light duty harp NKL= Nickel PWT....5 light duty harp PWT= Pewter BPL....6 light duty harp BPL....6 ½ light duty harp BPL light duty harp BPL ½ light duty harp BPL light duty harp BPL ½ light duty harp BPL light duty harp BPL ½ light duty harp BPL light duty harp BPL ½ light duty harp BPL light duty harp Heavy Duty Harps ABR heavy duty harp ACP heavy duty harp BPL heavy duty harp NKL heavy duty harp ABR ½ heavy duty harp ACP ½ heavy duty harp BPL... 6 ½ heavy duty harp NKL ½ heavy duty harp ABR heavy duty harp ACP heavy duty harp BPL heavy duty harp NKL heavy duty harp ABR ½ heavy d uty harp ACP ½ heavy duty harp BPL ½ heavy duty harp NKL ½ heavy duty harp 10 Sided 12 Sided Multi-sided Vented Vase Caps VUNF sided diamond vented approx 1 5/8 per side VUNF....8 sided diamond vented approx 1 ¼ per side VUNF sided diamond vented approx 1 per side VUNF sided diamond vented approx ¾ per side Vase Cap Solid Brass Stamped UNF....2 vase cap - solid brass stamped f UNF....2 ½ vase cap - solid brass stamped UNF....3 vase cap - solid brass stamped UNF....3 ½ vase cap - solid brass stamped UNF....4 vase cap - solid brass stamped UNF....4 ½ vase cap - solid brass stamped UNF....5 vase cap - solid brass stamped Vase Vase Caps Solid Brass-cast Pinwheel UNF....2 Pinwheel cap- solid brass cast UNF....3 Pinwheel cap - solid brass cast UNF....3 ½ Pinwheel cap - solid brass cast UNF....4 Pinwheel cap - solid brass cast UNF....4 ½ Pinwheel cap - solid brass cast UNF....5 Pinwheel cap - solid brass. cast Solid Brass Stamped to Solid Brass Cast Pinwheel Cap to Order Toll-Free H - 4 rburke@bellnet.ca
5 VUNF 2 7/8 x 2 7/ UNF 1 ¾ x 1 ¾ Square Brass Vase Caps Diamond Vented Brass Vase Caps Glass Holders ½" Diamond Vented Brass Vase Cap ¾" Diamond Vented Brass Vase Cap " Diamond Vented Brass Vase Cap ¼" Diamond Vented Brass Vase Cap ½" Diamond Vented Brass Vase Cap ¾" Diamond Vented Brass Vase Cap " Diamond Vented Brass Vase Cap ¼" Diamond Vented Brass Vase Cap ½" Diamond Vented Brass Vase Cap ¾" Diamond Vented Brass Vase Cap " Diamond Vented Brass Vase Cap ¼" Diamond Vented Brass Vase Cap ½" Diamond Vented Brass Vase Cap ¾" Diamond Vented Brass Vase Cap " Diamond Vented Brass Vase Cap ¼" Diamond Vented Brass Vase Cap ½" Diamond Vented Brass Vase Cap ¾" Diamond Vented Brass Vase Cap " Diamond Vented Brass Vase Cap ¼" Diamond Vented Brass Vase Cap ½" Diamond Vented Brass Vase Cap ABR....2¼" Steel Holder - Antique Brass BRZ....2¼" Steel Holder - Bronze BPL....3¼" Bright Brass Vented Globe Holder BPL....4" Bright Brass Vented Globe Holder ABR....3 ¼" Steel Holder - Antique Brass BLK....3 ¼" Steel Holder - Black BPL....3 ¼" Steel Holder - Brass Plated NKL....3 ¼" Steel Holder - Nickle UNF....3 ¼" Steel Holder - Unfinished ABR....4" Steel Holder - Antique Brass BLK....4" Steel Holder - Black NKL....4" Steel Holder - Nickle UNF....4" Steel Holder - Unfinished ABR ABR ABR ABR Candelabra Clusters With die cast body and arms ABR Lite Candelabra Cluster - Antique Brass ABR Lite Candelabra Cluster - Antique Brass ABR Lite Candelabra Cluster - Antique Brass ABR Lite Candelabra Cluster - Antique Brass Brass Rings Brass Ring for 2 ¼" Holder Brass Ring for 3 ¼" Holder Brass Ring for 4" Holder Sided Brass Ring for 2 ¼" Holder - each side is approximately 1 ¾ Note: A vase cap must be tinned before you can apply a patina. It is better to tin a cap before applying it to a lamp as it requires a lot of heat which could transfer to the glass and cause breakage. To tin a cap first wash it well and dry it, then apply flux and heat the cap starting at the top. When the cap is hot apply a small amount of solder and let it flow evenly over the cap - repeat until completely covered with solder - wash well and install it on the lamp. Cluster Pipes ABR ABR ABR ABR ABR ABR ABR ABR ABR ABR ABR ABR ABR 6" Cluster Pipe - Antique Brass 6½" Cluster Pipe - Antique Brass 7" Cluster Pipe - Antique Brass 7½" Cluster Pipe - Antique Brass 8" Cluster Pipe - Antique Brass 8½" Cluster Pipe - Antique Brass 9" Cluster Pipe - Antique Brass 9½" Cluster Pipe - Antique Brass 10" Cluster Pipe - Antique Brass 10½" Cluster Pipe - Antique Brass 11" Cluster Pipe - Antique Brass 11½" - Cluster Pipe - Antique Brass 12" Cluster Pipe - Antique Brass H - 5 Order Toll-Free
6 Lamp Parts Assemblies for Hanging Shades Canopy Kit - 5" dia. Slip 1/8 IP center hole with 2¾ C to C holes Includes basic fittings Canopy Kit - 5" dia. 1 1/16" center hole with 1/8IP screw collar loop. Includes basic fittings ABR.... Steel 2-Lt Assembly - Antique Brass BPL.... Steel 2-Lt Assembly - Bright Brass ABR.... Steel 3-Lt Assembly - Antique Brass BPL.... Steel 3-Lt Assembly - Bright Brass ABR.... Steel S Cluster Assembly - Antique Brass BPL.... Steel S Cluster Assembly - Bright Brass Reverse Hung Ceiling Fixtures ABR..2 Lt Reverse Hung - Antique Brass BPL...2 Lt Reverse Hung - Bright Brass ABR..3 Lt Reverse Hung - Antique Brass BPL...3 Lt Reverse Hung - Bright Brass ABR..4 Lt Reverse Hung - Antique Brass BPL...4 Lt Reverse Hung - Bright Brass Embossed Canopy Kit - 5" dia. 1 1/16" center hole with 1/8IP screw collar loop. Includes basic fittings Ceiling Canopy Kits ABR..Canopy Kit Antique Brass BPL...Canopy Kit Bright Brass ABR..Canopy Kit Antique Brass ACP..Canopy Kit Antique Copper BLK...Canopy Kit Black BPL...Canopy Kit Bright Brass NKL...Canopy Kit Nickel PWT..Canopy Kit Pewter WHT..Canopy Kit White ABR..Embossed Canopy Kit Antique Brass ACP...Embossed Canopy Kit Antique Copper BLK...Embossed Canopy Kit Black BPL...Embossed Canopy Kit Bright Brass NKL...Embossed Canopy Kit Nickel PWT..Embossed Canopy Kit Pewter WHT..Embossed Canopy Kit White Nite Lights, Bulbs and Cllips Bakelite Socket Assemblies Lt Bakelite Socket Lt Bakelite Socket Lt Bakelite Socket Nite Light Bulb Nite Lite - Ivory Base with Bulb Nite Lite - Blue Base with Bulb Nite Lite - Pink Base with Bulb Nite Lite - Brown Base with Bulb Nite Lite - Black Base with Bulb Nite Lite - White Base with Bulb Nite Light Clip & Screw Order Toll-Free H - 6 rburke@bellnet.ca
7 Sockets POR Porcelain Socket ABR Pull Chain Socket - Antique Brass BPL Pull Chain Socket - Bright Brass ABR Pull Chain 3-way Socket - Ant. Brass BPL Pull Chain 3-way Socket - Bright Brass ABR Push Thru Socket - Antique Brass BPL Push Thru Socket - Bright Brass ABR Turn Knob 3-way MT Ant. Brass BPL Turn Knob 3-way MT Bright Brass Candelabra Socket with Short Hickey 1 ¾ Candelabra Socket with Long Hickey 2 3/ ABR Turn Knob 2 cir. 3 ter. - Ant. Brass BPL Turn Knob 2 cir. 3 ter. - Bright Brass Fan Bases BRZ Hexagon Fan Base - Antique Brass ABR Shell Fan Base - Antique Brass Oak Fan Base BRZ Scalloped Fan Base - Antique Brass Watt Candelabra Bulb Fan Lamp Base Electrical H - 7 Order Toll-Free
Electrical Lamp Components
2-Light Cluster Assembly #097950 $59.95 2-Way S Cluster Assembly #097970 $59.95 3-Light Cluster Assembly #097960 $79.95 Electrical Lamp Components Swag Lamp Kit #091000 $43.95 Includes all electrical parts
More informationElectrical Lamp Components
2-Light Cluster Assembly #097950 $69.95 2-Way S Cluster Assembly #097970 $74.95 3-Light Cluster Assembly #097960 $89.95 Electrical Lamp Components Canopy Kit #091200 $9.95 Contains the hardware necessary
More informationClassic Lamp Parts. now offers a wide range of High Quality Finished Parts, including Finials, Necks, Harps, Canopies, Check Rings and More!
Classic Lamp Parts now offers a wide range of High Quality ed Parts, including Finials, Necks, Harps, Canopies, Check Rings and More! Available finishes include: Polished Brass, Satin Brass, Polished Nickel,
More informationMANUFACTURERS OF LAMP PARTS,LIGHTING PARTS, FITTINGS & FIXTURES VOL Y E A R. Artisan Lamp Parts
MANUFACTURERS OF LAMP PARTS,LIGHTING PARTS, FITTINGS & FIXTURES VOL - 1.1 Y E A R The Profile. is one of the leading prestigious fast developing firms in the field of Import & Export Company in India.
More informationTurn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC Customer Service Phone 63.273.2700 Fax 63.23.702 www.quoizel. ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wire strippers,electricaltape,safetyglasses.
More informationBrass On-Off 3/8" 6" 3/4" Nickel On-Off 3/8" 6" 3/4" 250
ROTARY On-Off 3-Way On-Off Metal Rotary Switch, Metal Bushing, Single Circuit. Rated: 6A-125V, 3A-250V 80-1132 Brass Finish 80-1132 Brass On-Off 3/8" 6" 3/4" 250 80-1133 Nickel On-Off 3/8" 6" 3/4" 250
More informationTurn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel. Pleasegotowww.quoizel.forproductcleaningtips.GototheCare+Maintenance selection. ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wire
More informationTurn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC Customer Service Phone 63.73.700 Fax 63.3.70 www.quoizel. Pleasegotowww.quoizel.forproductcleaningtips.GototheCare+Maintenance selection. ToolsRequired:
More informationPLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
More informationIMPORTANT SAFETY INSTRUCTIONS: -We strongly recommend that a professional electrician install all direct wire fixtures.
PRODUCT NAME: Mimi Quatrefoil Ceiling Mount ITEM NUMBER: LM199 BRA 1016 DIMENSIONS OF ITEM ASSEMBLED: 10 1/2 H x 15 1/2 DIA IMPORTANT SAFETY INSTRUCTIONS: -We strongly recommend that a professional electrician
More informationPARTS & ASSEMBLY SHEET
PARTS & ASSEMBLY SHEET Fixture Name: Echelon 8981-3P BRI / GRM This fixture assembled PO: Date: Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationMiniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
More informationmix n match MANOR RANGE Create your own design Exclusive to Beacon Lighting
mix n match MANOR RANGE Create your own design Exclusive to Beacon Lighting CUSTOMISED DESIGN MADE EASY Customise industrial style with the new Manor range. Match metal and glass shades or go bold with
More informationB235 Mobius Sconce Page 1 of 6
Mobius Sconce 28-9450 Page 1 of 6 CAUTION: FAILURE TO INSTALL THIS PRODUCT PROPERLY MAY RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE. We recommend installation by a qualified individual trained in the
More informationINSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT
INSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT QUANTITY DESCRIPTION 2 POWER TRAK, 5 FT LG 4 END CAPS, YELLOW 10 SCREWS, 1 5/8 LG 10 WASHERS, 5/8
More informationPARTS & ASSEMBLY SHEET
PARTS & ASSEMBLY SHEET Fixture Name: Echelon 8981-9 BRI / GRM This fixture assembled PO: Date: Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts
More informationRP-VE416FS/FSD VE416FS and VE416FSD Roll Grooving Tools
PARTS ORDERING INFORMATION When ordering parts, the following information is necessary for Victaulic to process the order promptly: 1. Tool Model Number VE416FS or VE416FSD 2. Tool Serial Number The Serial
More informationLTS. FLIRT CHANDELIER INSTALLATION INSTRUCTIONS
R 5-05 5LTS. FLIRT CHNDELIER INSTLLTION INSTRUCTIONS L I G H T I N G WRNING DISCONNECT POWER EFORE RE-LMPING OR WIRING THE FIXTURE RED LL INSTRUCTIONS COMPLETELY EFORE STRTING INSTLLTION. CUTION TO VOID
More informationParts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationParts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationCustom Pendant- Hardwire Assembly and Installation Instructions
Custom Pendant- Hardwire Assembly and Installation Instructions CAUTION: BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT IS TURNED OFF AT THE MAIN FUSE BOX / CIRCUIT BREAKER UTILITY BOX.
More informationWoven Leather Chandelier Large Assembly and Installation Instructions
CAUTION: Woven Leather Chandelier Large Assembly and Installation Instructions BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT IS TURNED OFF AT THE MAIN FUSE BOX / CIRCUIT BREAKER UTILITY
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationGHz BGA SOCKET - direct mount, solderless
45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression
More informationTrim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationNight Vent Handle. Window Furniture - for side & top hung casement windows WF2:010. Fixings
Night Vent Handle A traditional bulb end design Night Vent Handle with Wedge Plate featuring two vent positions for open-out, side and top hung, casement windows. A lockable version with removable key
More informationJ-BOX. 3-O or 4-0 MUD RING J-BOX BRACKET BAR CABLE GRIPPER/ CANOPY MOUNTING STUD 8-32 BRACKET BAR SCREWS CANOPY STRAIN RELIEF POWER CORD CANOPY
KELSEY - CSS Cable Suspended Rotational and Static CSS - Cable Suspended 3-O or 4-0 MUD RING BRACKET BAR 1/4-20 STUD 8-32 BRACKET BAR SCREWS STRAIN RELIEF POWER CORD MOUNTING GRIPPER AIRCRAFT CABLE CABLE
More informationTo find your fixture, click on the links below to take you to the right place and scroll through the pictures.
Thanks for your purchase of a Union Hill IronWorks Fixture. We take pride in handcrafting each piece in the USA. To make your install experience as easy as possible, we ve put together customized instructions
More informationOcean Modern Sample Case Re-Cap All Fixtures are Solid Brass
Ocean Modern Sample Case Re-Cap All Fixtures are Solid Brass E1 (Nickel Plated) This fixture is a fixed downlight. Minimal 2 extension from vertical surface on 2 diameter canopy. Ideal for either FL (flood)
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationA500 ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS 1 CONTENTS 2 Component Parts A B Canopy Mounting Plate C Cap (3) D Threaded Nipple E Threaded Standoffs (2) F Anchors (8) G #10 Screws (8) H Safety Cable (2) I Safety
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationBULLDOG Hardware Inventory UPC Description QTY antique upholstery nails upholstery nails gold 600
25188039116 antique upholstery nails 290 25188039321 upholstery nails gold 600 25188060035 blued tacks #6 1/2 600 25188060042 blued tacks #8 9/16 433 25188060059 blued tacks #10 5/8 450 25188060073 blued
More informationArched Top Lantern Pendant Assembly and Installation Instructions. Country of Destination: US/CN UK/EU/AUS Middle East
CAUTION: Arched Top Lantern Pendant Assembly and Installation Instructions Country of Destination: US/CN UK/EU/AUS Middle East BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT IS TURNED OFF
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationChain, Rope & Accessories
A Perry Product Guide A range of both steel and plastic chain, including accessories. This range includes:- Steel Chain Plastic Chain Security Chain Accessories for Plastic Chain Accessories for Steel
More informationSkLO : LIT.
SkLO : LIT www.sklostudio.com catch light catch light 7/8 (2CM) APPROX 3 ½ (9CM) side view APPROX 5 (13CM) catch light A concave crystal element with highly polished edges and an opaque color on the inside
More informationmix n match Manor Pendants Exclusive to Beacon Lighting
mix n match Manor Pendants Exclusive to Beacon Lighting Customised design made easy Customise industrial style with the new Manor range. Match metal and glass shades with a rod or suspension cord and adjust
More informationInstallation Instructions
MOUNT TUB SYSTEMS HAMPTON TRIM KIT T980.702 Installation Instructions T980.702 T980.712 T980.722 T980.732 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To
More informationM2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4
M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationVACUSEAL MODEL 300 & 400
VACUSEAL MODEL 300 & 400 G L HOT TUB PRODUCTS 2 Toelles Road, Suite 13 Wallingford, CT 06492 860-469-2580 www.hottubproducts.com J G F H H K E D C I A P B 10 9 8 7 6 5 4 3 2 1 0 0 1 Figure 1 2 3 4 SPAS
More informationVACUSEAL MODEL 200. HOT TUB PRODUCTS 233 Carrington Road Bethany CT
VACUSEAL MODEL 200 J G F G H L HOT TUB PRODUCTS 233 Carrington Road Bethany CT 06524 860-469-2580 www.vacusealcoverlift.com www.hottubproducts.com Made in USA H K E D C I A P B 10 9 8 7 6 5 4 3 2 1 0 SPAS
More informationPrice list Lamps & Lights
The prices are suggested retail prices excluding and including 19%. This price list is valid from January 01, 2018 to December 31, 2018. Page 1/5 Order-No. excl. 19% INTERIOR LIGHTS Jumo 100478 483.19
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationBy C.W. Woodson From the pages of Model Craftsman magazine June, 1937
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions
More informationLanterns. poly. poly lanterns. Coach Wall Lantern with Brass Trimmed Acrylic Panels. Hex Dome Wall Lantern with Clear Acrylic Panels
poly Lanterns Coach Wall Lantern with Brass Trimmed Acrylic Panels 77-896 Black 77-897 White Dimensions: Height 17, Extension 8, Diameter 7 3 4, Top to Outlet 12 Hex Dome Wall Lantern with Clear Acrylic
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationPORTA~TRACE. GAGNE, INC. 41 Commercial Dr. Johnson City, New York Phone: Fax: ASSEMBLY INSTRUCTIONS
PORTA~TRACE GAGNE, INC. 41 Commercial Dr. Johnson City, New York 13790 Phone: 1-607-729-3366 Fax: 1-607-729-7644 ASSEMBLY INSTRUCTIONS PORTA~TRACE MODEL 2436T LIGHT TABLE PORTA~TRACE MODEL 3648T LIGHT
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationIMPORTANT SAFETY INSTRUCTIONS:
PRODUCT NAME: DELANEY PENDANT ITEM NUMBER: LC661 DIMENSIONS OF ITEM ASSEMBLED: 20 3/4 H x 10 1/2 Square IMPORTANT SAFETY INSTRUCTIONS: -We strongly recommend that a professional electrician install all
More informationINSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System
INSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System IMPORTANT SAFETY INSTRUCTIONS: Read all instructions before installation. Save these instructions for later use.
More informationPiper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
More informationROPE CHANDELIER - FRAME ASSEMBLY & INSTALLATION INSTRUCTIONS
ROPE CHANDELIER - FRAME ASSEMBLY & INSTALLATION INSTRUCTIONS CAUTION: BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT IS TURNED OFF AT THE MAIN FUSE BOX / CIRCUIT BREAKER UTILITY BOX. IMPORTANT
More informationRoman Blind System SECTION J
System Roman Blind System SECTION J ROMAN BLIND SYSTEM EASY step by step fitting instructions Mono control operation - when the cord reaches its maximum drop, by continuing to pull on the chain the blind
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationF5513 APOGEE 30"DIA 3LTS PENDANT INSTALLATION INSTRUCTIONS WARNING
F5513 APOGEE 30"DIA 3LTS PENDANT INSTALLATION INSTRUCTIONS TROY LIGHTING DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION. CAUTION
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationMK-370 TILE SAW OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-370 TILE SAW OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 20 02.207 Manual Part# 56760 Caution: Read all safety and operating instructions before using this equipment.
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationTire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
More informationCaution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
izz Kitchen Pendant With Brass Accent - 18700 Page 1 of 5 CAUTON: AUR TO NSTA THS XTUR PROPRY MAY RSUT N SROUS PRSONA NURY OR DATH AND PROPRTY DAMAG. We recommend installation by a licensed electrician.
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationZIP CLOUD SUSPENDED INSTALLATION MANUAL
ZIP CLOUD SUSPENDED INSTALLATION MANUAL www.delviro.com info@delviro.com 1.877.502.3434 SAFETY NOTE: Follow the Electrical Codes of the Country where this fixture will be installed. For Canada follow the
More informationAcrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
More informationB & M HARDWARE. Timely Hardware. Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware. Classic, Traditional & Vintage Styles
Vol. 14 $12.00 B & HARDWARE Timely Hardware Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware Classic, Traditional & Vintage Styles B & Hardware 4125 Avenida de la Plata Oceanside
More information3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 PowerLock Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationOPERATIONS MANUAL. Port-O-Slitter
Tapco Products Company The World Leader in Specialty Tools for the Professional Port-O-Slitter OPERATIONS MANUAL General instructions, set up, accessories and guide to using your portable precision slitting,
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationINSTALLATION INSTRUCTIONS
SHD TO REMOVE HOOD (SHD) ) LOOSEN (4) SOCKET HEAD SCREWS AND RETAINING RINGS FROM HOOD (SHD). ) REMOVE HOOD AND. 3) DISCONNECT WIRES. 3 4) REMOVE REFLECTOR BY LOOSENING (4) PHILIPS HEAD SCREWS. 5) PLEASE
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationPARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
More information1503 Follow Spot Yoke, Source Four LED
1503 Follow Spot Yoke, Source Four LED Rev 1.0 2016 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke for source four LED Congratulations on the purchase of your City Theatrical
More informationSpareParts Book Rev. 2.0
SpareParts Book Rev. 2.0 Macchina GB Sezione 1 GB_part1 1 GB/T 70.3 2000 Hexagon head screw M10 60 2 2,1 G.FMH150.S 023 Pulley cover weldment 150 1 2,2 G.FMH180.S 023 Pulley cover weldment 180 1 3,1 SPB
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationWADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.
Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory
More informationWELDING POSITIONER PARTS BREAKDOWN DRAWING GP-200
WELDING POSITIONER PARTS BREAKDOWN 10 DRAWING GP-200 1 GP-200-001 FRAME 1 2 GK-160-012 5/16"-18UNC x 5/8" CARRIAGE BOLT 6 3 GK-136-055 5/16"Ø LOCK WASHER 6 4 GK-109-052 5/16"-18UNC HEX NUT 10 5 GP-200-002
More informationCABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS
Assembled cabanas are large & heavy. Assemble at place of use. CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Step 1 CAUTION: To avoid damage to the finish of your Cabana frame, prepare a smooth, non-scratch
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationHD38, HD58, HD78 REV
HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869
More informationParts Manual 881 Hay Hiker
Parts Manual 881 Hay Hiker Part Number K20393P-06 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More information