Miniature Steam Pty Ltd (Incorporating Live Steam Supplies)
|
|
- Avis Hutchinson
- 5 years ago
- Views:
Transcription
1 Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right to stop supply of items listed, or change the supply price without notice. Our Website: has the most current price and availability information. Miniature Steam Pty Ltd PO Box 16 Montrose Victoria 3765 Australia Phone: Fax: Website: Category Page Steam Engine Components & Pipe Fittings 2 Taps, Dies, Drills & Hand Tools.. 3 Bolts, Nuts, Screw s, Rivets & Washers.. 4 Modeling Materials.. 5 K&S Precision Tubes & Sections 7 Miscellaneous Items
2 STEAM ENGINE ACCESSORIES & PIPE FITTINGS Single Loose Unions /8" Pipe, 1/4" Body $ /32" Pipe, 9/32" Body $ /16" Pipe, 3/8" Body $ /32" Pipe, 3/8" Body $ /4" Pipe, 7/16" Body $ /16" Pipe, 1/2" Body $3.85 Double Loose Unions /16 Pipe, 1/2 Hex body $6.30 Tails and Union Nuts - Pkt 5 Pairs 2576 Tails 1/16" pipe - for 5/32" x 40 TPI nut $ Tails 3/32" pipe - for 3/16" x 40 TPI nut $ Tails 3/32" pipe - for 7/32" x 40 TPI nut $ Tails 3/32" pipe - for 1/4" x 40 TPI nut $ Tails 1/8" pipe - for 7/32" x 40 TPI nut $ Tails 1/8" pipe - for 1/4" x 40 TPI nut $ Tails 5/32" pipe - for 1/4" x 40 TPI nut $ Tails 5/32" pipe - for 5/16" x 32 TPI nut $ Tails 3/16" pipe - for 5/16" x 32 TPI nut $ Tails 7/32" pipe - for 5/16" x 32 TPI nut $ Tails 7/32" pipe - for 3/8" x 32 TPI nut $ Tails 1/4" pipe - for 3/8" x 32 TPI nut $ Tails 1/4" pipe - for 7/16" x 26 TPI nut $ Tails 5/16" pipe - for 7/16" x 26 TPI nut $7.70 Taper Thread Pipe Fittings deg M&F Bend 3/16" x 40 ea. $ deg M&F Bend 1/4" x 40 ea. $ deg M&F Bend 5/16" x 27 ea. $ deg Bend 3/16" x 40 ea. $ deg Bend 1/4" x 40 ea. $ deg Bend 5/16" x 27 TPI ea. $ deg Bend 3/16" x 40 ea. $ deg Bend 1/4" x 40 ea. $ deg Bend 5/16" x 27 ea. $ Tee 3/16" x 40 TPI ea. $ Tee 1/4" x 40 TPI ea. $ Tee 5/16" x 27 TPI ea. $ Cross 3/16" x 40 TPI ea. $ Cross 1/4" x 40 TPI ea. $ Cross 5/16" x 27 TPI ea. $ Nipple Short 3/16" x 40 TPI ea. $ Nipple Short 5/16" x 27 TPI ea. $ Nipple Short 1/4" x 40 TPI ea. $ Nipple 1/2" - 3/16" x 40 TPI ea. $ Nipple 1/2" - 1/4" x 40 TPI ea. $ Nipple 3/4" - 1/4" x 40 TPI ea. $ Plug 3/16" x 40 TPI ea. $ Plug 1/4" x 40 TPI ea. $ Reducing Bush 1/4" TPI - 3/16" TPI ea. $ Reducing Bush 5/16" TPI - 1/4" TPI ea. $ Union 3/16" x 40 TPI $ Union 1/4" x 40 TPI $ Union 5/16" x 27 TPI $12.50 Taper Thread Check Valves 9480 Inline 3/16" x 40 MTP ea. $ Inline 1/4" x 40 MTP ea. $ Inline 5/16" x 27 MTP ea. $ Angle 3/16" x 40 MTP ea. $ Angle 1/4"x 40 MTP ea. $ Angle 5/16" x 27 MTP ea. $34.00 Taper thread Globe Valves 9486 Inline 3/16" x 40 MTP ea. $ Inline 1/4" x 40 MTP ea. $ Inline 5/16" x 27 MTP ea. $ Angle 3/16" x 40 MTP ea. $ Angle 1/4" x 40 MTP ea. $ Angle 5/16" x 27 MTP ea. $49.90 Manually Operated Cylinder Drain Cocks (For stationary engines) /32 x 40 TPI mount - pair. $48.50 Steam Operated Cylinder Drain Cocks /16" x 26 TPI Mount Incl. Valve - Set of Four $ Manually Operated Cylinder Drain Cocks (For Locomotives and Traction Engines) /4" x 40 TPI Mount Incl. Valve (LH/RH pair) $ /32" x 40 TPI Mount Incl. Valve (LH/RH pair) $ /16" x 40 TPI Mount Incl. Valve (LH/RH pair) $46.00 Steam Stop Valves /4" x 40 5/32" Pipe $ /4" x 40 3/16" Pipe $ /16" x 32 1/4" Pipe $48.00 Piston Rings 2631 Piston Rings 7/8 x 1/16* $ Piston Rings 3/4" x 1/16" $ Piston Rings 1 x 1/16* $ Piston Rings 1-1/8 x 1/16 $ Piston Rings 1-1/4 x 1/16 $ Piston Rings 1-3/8 x 1/8 $ Piston Rings 1-1/2 x 1/8 $ Piston Rings 1-5/8 x 1/8 $ Piston Rings 1-3/4 x 1/8 $ Piston Rings 1-7/8 x 1/8 $ Piston Rings 2" x 1/8" $ Piston Rings 2-1/4" x 1/8" $ Gland Packing 8307 Graphite Filled P.T.F.E. Packing 3 mm sq x 200mm Displacement Lubricators $ Adj. Feed 1/4" x 32 $ In Line Non Adjustable 3/16" Pipe $ Non Adjustable 1/4" x 40 With Steam Cock $65.00 Glass Tube (150 mm Lengths) mm dia $6.00 2
3 8401 5mm dia $ mm dia $ mm dia $ mm dia $ mm dia $6.00 Pressure Gauges 4224 Pressure Gauges 3/4" Dia.0 to 60 psi. $ Pressure Gauges 3/4" Dia.0 to 80 psi. $ Pressure Gauges 3/4" Dia.0 to 100 psi. $ Pressure Gauges 3/4" Dia 0 to 120 psi. $ Pressure Gauges 3/4" Dia. 0 to 150 psi $ Pressure Gauges 1" Dia 0 to 80 psi. $ Pressure Gauges 1 Dia 0 to 120 psi $ Pressure Gauges 1 Dia 0 to 150 psi $ Pressure Gauge 1 Dia. flange 0 to 150 psi $ Vacuum Gauge 1" $ Safety Valves /4" x 40 TPI - ea. 60 psi max $ /32 x 40 TPI - ea. 60 psi max $ /8" x 32 TPI - ea. 80 psi max $ /2" x 26 TPI pop Type 1/4" Bore - ea. TBA Gauge Glass Assemblies Gauge Glass Assemblies- 5mm Glass, 1/4" x $ TPI Suitable for 2,3 & 4" Boilers Angle Water Check Valves /4" x 40-5/32"Pipe - ea $39.00 TAPS, DIES, DRILLS & HAND TOOLS Model Engineer (ME) Taps & Dies ME Taps 1/8" 40 TPI Only Sec/Bot $ ME Taps 5/32" 32/40 TPI Sec/Bot $ ME Taps 3/16" 32/40 TPI Sec/Bot $ ME Taps 7/32" 32/40 TPI Sec/Bot $ ME Taps ¼ 32/40 TPI Sec/Bot $ ME Taps 9/32" 32/40 TPI Sec/Bot $ ME Taps 5/16 32/40 TPI Sec/Bot $ ME Taps 3/8 32/40 TPI Sec/Bot $ ME Taps 7/16 32/40 TPI Sec/Bot $ ME Taps ½ 32/40 TPI Sec/Bot $ ME Dies 1/8 40 TPI - 13/16 Dia $ ME Dies 5/32 32/40 TPI 13/16 Dia $ ME Dies 3/16 32/40 TPI -- 13/16" Dia $ ME Dies 7/32" 32/40 TPI 13/16" Dia $ ME Dies ¼ 32/40 TPI 13/16 Dia $ ME Dies 9/32 32/40 TPI -- 1 Dia $ ME Dies 5/16 32/40 TPI --1 Dia $ ME Dies 3/8 32/40 TPI --1 Dia $ ME Dies 7/16" 32/40 TPI - 1" Dia $ ME Dies 1/2" 32/40 TPI - 1" Dia $ BA Taps & Dies BA Taps - 2 BA Sec/Bot $ BA Taps - 4 BA Sec/Bot $ BA Taps - 5 BA Sec/Bot $ BA Taps - 6 BA Sec/Bot $ BA Taps - 7 BA Sec/Bot $ BA Taps - 8 BA Sec/Bot $ BA Taps - 10 BA Sec/Bot $ BA Dies - 2 BA 13/16 Dia $ BA Dies - 4 BA 13/16 Dia $ BA Dies - 5 BA 13/16 Dia $ BA Dies - 6 BA 13/16 Dia $ BA Dies - 7 BA 13/16 Dia $ BA Dies - 8 BA 13/16 Dia $ BA Dies - 10 BA 13/16 Dia $ BSB Taps & Dies BSB Taps 1/4" x 26 BSB Sec/Bot $ BSB Taps 9/32" x 26 BSB Sec/Bot $ BSB Taps 5/16" x 26 BSB Sec/Bot $ BSB Taps 3/8" x 26 BSB Sec/Bot $ BSB Taps 7/16" x 26 BSB Sec/Bot $ BSB Taps 1/2 x 26 BSB Sec/Bot $ BSB Die 1/4" x 26 BSB - 1" Dia $ BSB Die 5/16" x 26 BSB - 1" Dia $ BSB Die 3/8" x 26 BSB - 1" Dia $ BSB Die 7/16" x 26 BSB - 1" Dia $ BSB Die 1/2" x 26 BSB - 1" Dia $ Taper Pipe Taps & Dies Tap 3/16" x 40 MTP $ Tap 1/4" x 40 MTP $ Tap 5/16" x 27 MTP $ Die 3/16" x 40 MTP $ Die 1/4" x 40 MTP $ Die 5/16" x 40 MTP $45.75 Metric Drills 7564 Metric Drill 1.0 to 1.9 mm. - ea $ Metric Drill 2.0 to 2.9 mm. - ea $ Metric Drill 3.0 to 3.9 3mm. - ea $ Metric Drill 4.0 to 4.9 mm. - ea $ Metric Drill 5.0 to 5.9 mm. - ea $ Metric Drill 6.0 to 6.9 mm. - ea $ Metric Drill 7.0 to 7.9 mm. - ea $ Metric Drill 8.0 to 8.9 mm. - ea $ Metric Drill 9.0 to 9.9mm. - ea $ Metric Drill 10mm. - ea $
4 Center Drills 7310 Center Drills No.1 - ea. $ Center Drills No.2 - ea. $ Center Drills No.3 - ea. $9.05 Die Holders 7350 Die Holder 13/16 diam. - ea. $ Die Holder 1-1/2" diam. - ea. $26.00 Tap Wrenches 7521 Tap Wrench No.00 3 Long $ Tap Wrench No /8 Long - ea. $37.00 Tool Bits 7540 Tool Bits 1/4" sq. x 2-1/2" - ea $ Tool Bits 3/16" sq. x 2-1/2" - ea $ Tool Bits 3/8" sq. x 3" - ea $ Tool Bits 5/16" sq. x 2-1/2" - ea. $32.00 BOLTS, NUTS, SCREWS RIVETS & WASHERS Brass Screws 9213 Hex Head 2 BA x 1/2" - Pkt 25 $ Hex Head 4 BA x 1/2" - Pkt 25 $ Hex Head 5 BA x 1/2" - Pkt 25 $ Hex Head 6 BA x 1/2" - Pkt 25 $ Hex Head 7 BA x 1/2" - Pkt 25 $ Hex Head 8 BA x 1/2" - Pkt 25 $ Hex Head 10 BA x 1/2" - Pkt 25 $8.80 Flat Washers 9167 Brass - 2 BA - Pkt Brass - 4 BA - Pkt 50 $ Brass - 5 BA - Pkt 50 $ Brass - 6 BA - Pkt 50 $ Brass - 7 BA - Pkt 50 $ Brass - 8 BA - Pkt 50 $ Brass - 10 BA Pkt 50 $ Steel - 2 BA - Pkt 50 $ Steel - 4 BA - Pkt 50 $ Steel - 5 BA - Pkt 50 $ Steel - 6 BA - Pkt 50 $ Steel - 7 BA - Pkt 50 $ Steel - 8 BA - Pkt 50 $ Steel - 10 BA - Pkt 50 $3.75 Steel Hex Head Bolts - Pks BA x 1/2 $ BA x 5/8 $ BA x 3/4 s $ BA x 1 $ BA x 1/2 $ BA x 5/8 $ BA x 3/4 $ BA x 1 $ BA x 1/2" $ BA x 5/8 $ BA x 3/4" $ BA x 1" $ BA x 1/2" $ BA x 5/8 $ BA x 3/4" $ BA x 1" $ BA x 1/2" $ BA x 5/8 $ BA x 3/4" $ BA x 1" $9.90 Steel Hex Head Screws Pks BA x 1/4" $ BA x 3/8" $ BA x 1/2" $ BA X 1/4" $ BA X 3/8 $ BA x 1/2" $ BA x 1/4" $ BA x 3/8 $ BA x 1/2 $ BA x 1/4 $ BA x 3/8 $ BA x 1/2 $ BA x 1/4 $ BA x 3/8 $ BA x 1/2 $ BA x ¼ Pkt 25 $ BA 1/2" - Pkt 25 $ BA 3/4" - Pkt 25 $ BA x 1/4" Pkt 25 $ BA x 1/2" Pkt 25 $ BA x3/4 Pkt 25 $8.80 Hex Head Nuts - Brass BA - Pack 25 $ BA Pack 25 $ BA Pack 25 $ BA Pack 25 $ BA Pack 25 $ BA Pack 25 $ BA Pack 25 $7.70 Hex Head Nuts - Steel BA- Packs 50 $ BA- Packs 50 $ BA- Packs 50 $ BA- Packs 50 $ BA- Packs 50 $ BA Packs 25 $ BA Packs 25 $7.70 Grub Screws mm x 3mm - SS - Pkt 10 $ mm x 4mm SS- Pkt 10 $ BA x 3/8 - Pkt 10. $5.50 Screwed Rod - All Thread - per300 mm 9604 Brass 2 BA, 4 BA, 6 BA, $ Steel 2 BA, 4 BA, 6 BA, $15.40 Steel Round Head Rivets Pkt Steel 1/16 x 1/4 $ Steel 1/16 x 3/8 $ Steel 1/16 x 1/2 $ Steel 3/32 x 3/8 $7.30
5 9711 Steel 3/32 x 1/2 $ Steel 3/32 x 3/4 $ Steel 1/8 x 3/8 - $ Steel 1/8 x 1/2 - $ Steel 1/8 x 3/4 - $ Steel 1/8 x 1 - $ Steel 5/32 x 1/2 $ Steel 5/32 x 3/4 $ Steel 3/16 x 1/2 - Pkt 50 $ Steel 3/16 x 1 - Pkt 50 $9.50 Brass Round Head Rivets Pkt Brass 1/32 x 1/4" $ Brass - 3/64" x 1/4" $ Brass - 3/64" x 3/8" $ Brass 1/16 x 1/4" $ Brass - 1/16" x 3/8" $ Brass - 1/16" x 1/2" $ Brass - 3/32"x 1/4" $ Brass - 3/32"x 3/8" $ Brass - 3/32"x1/2" $ Brass - 3/32"x 3/4" $ Brass - 1/8" x 5/16" $10.75 Copper Round Head Rivets Pkt Copper-1/16" x 1/4" $ Copper-1/16" x 3/8" $ Copper-1/16" x 1/2" $ Copper-3/32" x 1/4" $ Copper-3/32" x 3/8" $ Copper-3/32" x 1/2" $ Copper-3/32" x 3/4" $ Copper - 1/8"x 1/4"- Pkt 50 $ Copper - 1/8"x 3/8"- Pkt 50 $ Copper - 1/8"x 1/2"- Pkt 50 $ Copper - 1/8"x 3/4",- Pkt 50 $ Copper - 1/8"x 1"- Pkt 50 $ Copper - 5/32 x 1 - Pkt 25 $ Copper - 3/16" x 1" - Pkt 25 $17.95 Roll Pins 9350 Roll Pins 1/16" x 1/4" - Pkt 10 $ Roll Pins 1/16" x 3/8" - Pkt 10 $ Roll Pins 3/32" x 1/2" - Pkt 10 $ Roll Pins 1/8" x 1" - Pkt 10 $5.50 Split Pins 9450 Split Pins - Steel - 1/16" x 1/2" - Pkt 10 $ Split Pins - Steel - 1/16" x 1/2" - Pkt 10 $ Split Pins - Brass - 1/16" x 1/2" - Pkt 10 $2.20 Taper Pins 9700 Taper Pins Steel- 0, - ea. $ Taper Pins Steel- 2/0 - ea. $ Taper Pins Steel - 5/0 - ea $ Taper Pins Steel - 6/0 ea $ Taper Pins - Steel 7/0 - ea $1.30 RAW MATERIALS Bright Mild Steel - Hexagon - per 300 mm /16" $ /32" $ /4" $ /16" $ /8" $ /16" $ /2" $ /16" $ /8" $ /4" $ /8" $ $ /8" $ /4 $ /2" $31.20 Bright Mild Steel Round - per 300mm /32" dia $ /8" dia $ /32" dia $ /16" dia $ /32" dia $ /4" dia $ /16" dia $ /8" dia $ /16" dia $ /2" dia $ /16" dia $ /8" dia $ /4" dia $ /8" dia $ " dia $ /4" dia $20.65 Bright Mild Steel Square - per 300 mm /16" $ /4" $ /16" $ /8" $ /2" $ /8" $ /4" $ /8" $ " $ /4 $ /2 $51.15 Bright Mild Steel Flats per 300 mm /8 x 1/2 $ /4 x 3/16 $ /4 x 1/4 $ /4 x 1/2 $ x 1/4 $ x 5/16 $ x 1/2 $ x 5/8 $ /4 x 1/4 $ /2 x 1/4 $ /2 x 1/2 $
6 x 1/2 $ x 1/4 $ x 3 mm $ x 5 mm $ x 3 mm $ x 5 mm $ x 7 mm $ x 3 mm $ x 5 mm $ x 10 mm $ x 10 mm $ x 5 mm $ x 7 mm $ x 15 mm $ x 5 mm $ x 10 mm $24.55 Brass Round per 300 mm /32"' Dia $ /8" Dia $ /32" Dia $ /16" Dia $ /32" Dia $ /4" Dia $ /32" Dia $ /16" Dia $ /32" Dia $ /8" Dia $ /16" Dia $ /2" Dia $ /16" Dia $ /8" Dia $ /4" Dia $ /8" Dia $20.70 Brass Round per 50 mm " Dia $ /8" $ /8" $14.20 Brass Square per 300 mm /8" $ /16" $ /4" $ /16" $ /8" $ /16" $ /2" $ /8" $ /4" $ $34.50 Brass Hexagon /32" x 300 mm $ /16" x 300 mm $ /32" x 300 mm $ /4" x 300 mm $ /32" x 300 mm $ /16" x 300 mm $ /8" x 300 mm $ /16" x 300 mm $ /2" x 300 mm $ /16" x 300 mm $ /8" x 300 mm $ /4" x 300 mm $ x 50 mm $4.90 Brass Angle per 300 mm /4" x 1/4" x 1/16" $ /2" x 1/4" x 1/16" $ /2" x 1/2" x 1/16" $ /2" x 1/2" x 1/8" $ /4" x 3/4" x 1/16" $ " x 1" x 1/16" $ " x 2" x 1/8" $13.20 Brass Flat per 300 mm /16" x 3/8" $ /16" x 1/2" $ /16" x 3/4" $ /16" x 1" $ /8" x 1/4" $ /8" x 3/8" $ /8" x 1/2" $ /8" x 3/4" $ /8" x 1" $ /8" x 1 1/2" $ /16 x 3/8" $ /16 x 3/4" $ /16" x 1" $ /4" x 1/2" $ /4" x 3/4" $ /4" x 1" $14.80 Brass Square Tube - per 150 mm " x 3/16" x 150 mm $ /4" x 3/16" x 150 mm $ /2" x 3/16" x 150 mm $16.70 Brass Half Round ("D" Section) per 300 mm 8086A Brass Half Round 1/4" $ A Brass Half Round 1/16" $ A Brass Half Round 5/32" $ A Brass Half Round 1/8" $3.55 Cast Iron Sections 8249 Round 20 mm dia. per 75 mm $ Round 30 mm dia. per 75 mm $ Round 40 mm dia. per 25 mm $ Round 45 mm dia. per 25 mm $ Round 55 mm dia. per 25 mm $ Square 50 mm sq per 25 mm $ Square 65 mm sq. per 25 mm $ Square 80 mm sq. per 25 mm $17.50 Brass Sheet 300 mm Square mm Thick $ mm Thick $
7 Bronze Round /2" per 50 mm $ /8" per 50 mm $ /4" per 50 mm $ /8" per 50 mm $ " dia per 25 mm $ /4" per 25 mm $ /2" per 25 mm $ /8" per 25 mm $ " per 25 mm $25.80 Copper Round per 300 mm /8" $ /4" $ /8" $6.60 Copper Tube Hard Drawn per 900 mm /8" x 24g (0.55 mm) Hard Drawn $ /32" x 22g (0.7 mm Hard Drawn $ /16" x 24g (0.55 mm) Hard Drawn $ /32" x 24g (0.55 mm) Hard Drawn $ /4" x 20g (0.91 mm) Hard Drawn $ /16 x 20g (0.91 mm) Hard Drawn $ /8" x 20g (0.91 mm) Hard Drawn $ /8" x 16g (1.62 mm) Hard Drawn $ /16 x 20g (0.91 mm) Hard Drawn $ /8" x 20g (0.91 mm) Hard Drawn $ /8" x 16g (1.62 mm) Hard Drawn $ /4" x 20 (0.91 mm) Hard Drawn $ /4" x 16g (1.62 mm) Hard Drawn $ /8" x 16g (1.62 mm) Hard Drawn $ " x 16g (1.62 mm) Hard Drawn $ /4" x 16g (1.62 mm) Hard Drawn $59.80 Copper Tube Annealed per 900 mm /8 x 24g $ /32" x 20g $10.20 Copper Solid Square per 300 mm /8" x 3/8" $ /16" x 5/16" $7.10 Black Steel Angle per 300 mm 8001 Black Steel Angle 1/2" x 1/2" x 3 mm $ Black Steel Angle 5/8" x 5/8" x 3 mm $ Black Steel Angle 1-1/4" x 1-1/4" x 1/8" $2.50 Stainless Steel Round per 300 mm mm dia $ /8" dia $ /16" dia $ /4" dia $ /16" dia $ /8" dia $ /16" dia $ /2" dia $ /16" dia $ /8" dia $ /4" dia $ /8" dia $14.85 Stainless Steel Round - Other " dia x 150mm $ /16" dia x 750mm $ /32" dia x 750mm $44.10 Stainless Steel Tube per 300 mm /2" x 16g $ /2" x 20g $ /4" x 20g $ /8" x 20g $3.50 K&S PRECISION TUBES & SECTIONS Brass Round Tube KS0125 1/16" OD 0.014" Wall 12" Long $2.10 KS0126 3/32" OD 0.014" Wall 12" Long $2.30 KS0127 1/8" OD 0.014" Wall 12" Long $2.95 KS0128 5/32" OD 0.014" Wall 12" Long $3.55 KS0129 3/16" OD 0.014" Wall 12" Long $4.15 KS0130 7/32" OD 0.014" Wall 12" Long $4.45 KS0131 1/4" OD 0.014" Wall 12" Long $5.05 KS0132 9/32" OD 0.014" Wall 12" Long $5.65 KS0133 5/16" OD 0.014" Wall 12" Long $6.20 KS /32" OD 0.014" Wall 12" Long $6.85 KS0135 3/8" OD 0.014" Wall 12" Long $7.10 KS /32" OD 0.014" Wall 12" Long $7.70 KS0137 7/16" OD 0.014" Wall 12" Long $8.05 KS /32" OD 0.014" Wall 12" Long $8.30 KS0139 1/2" OD 0.014" Wall 12" Long $8.90 KS /32" OD 0.014" Wall 12" Long $9.55 KS0143 5/8" OD 0.014" Wall 12" Long $11.00 KS /32" OD 0.014" Wall 12" Long $11.60 Brass Square Tube KS0149 1/16" Sq 0.014" Wall 12" Long $3.10 KS0150 3/32" Sq 0.014" Wall 12" Long $3.60 KS015 $4.30 1/8" Sq 0.014" Wall 12" Long 1 KS0152 5/32" Sq 0.014" Wall 12" Long $4.60 KS0153 3/16" Sq 0.014" Wall 12" Long $5.05 KS0154 7/32" Sq 0.014" Wall 12" Long $5.35 KS0155 1/4" Sq 0.014" Wall 12" Long $5.95 Brass Solid Round KS0161 3/64" x 12" Long $1.50 KS0162 1/16" x 12" Long $1.40 KS0163 3/32" x 12" Long $2.35 KS0164 1/8" x 12" Long $3.55 KS0165 5/32" x 12" Long $4.60 KS0166 3/16" x 12" Long $6.25 KS Dia x 12" Long $3.25 KS Dia x 12" Long $2.10 KS Dia x 12" Long $1.00 Brass Angle KS0171 1/8" x 1/8 " x 12" Long $3.05 KS0172 5/32" x 5/32 " x 12" Long $3.05 KS0173 3/16" x 3/16 " x 12" Long $3.35 KS0174 7/32" x 7/32 " x 12" Long $3.35 KS0175 1/4" x 1/4 " x 12" Long $3.60 Brass Tube Rectangular KS0262 3/32 x 3/16 x 12 Long $8.00 KS0264 1/8 x 1/4 x 12 Long $9.75 7
8 KS0266 5/32 x 5/16 x 12 long $10.05 KS /16 x 3/8 x 12 Long $10.35 Brass Strip KS " x 1/4" x 12" Long $2.35 KS " x 1/2" x 12" Long $2.60 KS " x 1" x 12" Long $4.05 KS " x 3/4" x 12" Long $2.95 KS " x 2" x 12" Long $6.30 KS " x 1/4" x 12" Long $2.60 KS " x 1/2" x 12" Long $3.25 KS " x 1" x 12" Long $5.75 KS " x 3/4" x 12" Long $4.45 KS " x 2" x 12" Long $11.30 KS " x 1/4" x 12" Long $2.85 KS " x 1/2" x 12" Long $3.85 KS " x 1" x 12" Long $7.15 KS " x 3/4" x 12" Long $5.65 KS " x 2" x 12" Long $13.85 KS " x 1/4" x 12" Long $3.85 KS " x 1/2" x 12" Long $7.45 KS " x 3/4" x 12" Long $10.70 KS " x 1" x 12" Long $14.60 KS " x 2" x 12" Long $26.80 Brass Sheet KS0250 Sheet 4" x 10" x 0.005" $6.95 KS0251 Sheet 4" x 10" x 0.010" $8.45 KS0252 Sheet 4" x 10" x 0.015" $12.50 KS0253 Sheet 4" x 10" x 0.032" $23.80 Brass Streamline KS Small $5.95 Aluminum Tube KS0100 1/16" OD x Wall x 12" Long $1.50 KS0101 3/32" OD x Wall x 12" Long $1.60 KS0102 1/8" OD x Wall x 12" Long $1.80 KS0103 5/32" OD x Wall x 12" Long $2.65 KS0104 3/16" OD x Wall x 12" Long $2.95 KS0105 7/32" OD x Wall x 12" Long $2.85 KS0106 1/4" OD x Wall x 12" Long $2.65 KS0107 9/32" OD x Wall x 12" Long $3.15 Aluminum Sheet KS0255 Sheet 4" x 10" x 0.016" $4.45 KS0256 Sheet 4" x 10" x 0.032" $5.45 Copper Sheet KS0259 Sheet 4" x 10" x 0.025" $21.70 Tin Sheet KS0254 Sheet 4" x 10" x 0.008" $4.15 MISCELLANEOUS ITEMS Stainless Steel Balls /32" - Packet of 10 $ /8" - Packet of 10 $ /32" - Packet of 10 $ /16" - Packet of 10 $ /32" - Packet of 10 $ /4" - Packet of 10 $ /8" - Packet of 10 $ /16" - Packet of 10 $ /16" Each $ /2" - Each $15.50 Screwed Spiggots /16" x 40 TPI $ /4" x 40 TPI $ /16" x 32 TPI $ /8 x 32 TPI $2.10 Other Sundry Items 8300 Filter Gauze 80 mesh x 150mm square $ Silver Solder Flux 200g $ Gasket Material - Klinger mm thick 300 $7.50 mm sq Silver Solder Grade 1.6mm dia x $ mm 8339 Silver Solder 245 Grade 0.8mm dia x 1 mm. $ Oils - Steam Oil per 250 ml. $ Si-Flo Lubricating Oil - 1 Liter $ Boiler Water Treatment 250 mlr $ Fire Clay - per Kg. $8.00 Engine Self Assembly Machined Kits 5045K Miniature Steam Tyne Single cylinder $ Oscillating Engine 5009K Miniature Steam Clyde Twin cylinder $ Oscillating Engine 9470 Vee Twin Cylinder Oscillating Engine Kit $ Steam Mill Twin Cylinder Engine Kit $ Steam Mill Single Cylinder Engine Kit $ V DC Dynamo Machined Kits $ Casting Kits from bronze using lost wax process 5000C Mildura twin cylinder vertical non reversing $ C Mildura twin cylinder vertical reversing $ C Echuca single cylinder vertical non reversing $ C Echuca single cylinder vertical reversing $ C Gem twin cylinder horizontal non reversing $ C Gem twin cylinder horizontal reversing $ C Pevensey single cylinder horizontal non $ reversing 5007C Pevensey single cylinder horizontal reversing $ We are constantly updating our product range to reflect the wishes of our customers. If you have a need for a particular product not represented here or on our website at please do not hesitate to contact us for help.
GENERAL ARRANGEMENT AND ISOMETRIC VIEW
.. 0.. GENERAL ARRANGEMENT AND ISOMETRIC VIEW E-MAIL: dewaal@xtra.co.nz. SHEET: OF 0 No: JLS- QTY. PART NUMBER JLS--BASE FRAME JLS-0A-TRUNK GUIDE JLS-0B-TRUNK GUIDE SIDE SUPPORT PLATE JLS-0C-TRUNK GUIDE
More informationV twin cylinder steam engine
V twin cylinder steam engine I got inspired to make this V twin steam engine after reading R. Griffinn s build articles in ME 4396. It is based on Stuart s V-twin double-acting oscillator, but since I
More informationPlumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
More informationBuilding Rudy Kouhoupt s Walking-Beam Engine
Building Rudy Kouhoupt s Walking-Beam Engine Some time ago I came across a copy of Rudy Kouhoupt s article: "Build this Walking-Beam Engine" (Popular Mechanics August 1969), and decided to try and make
More informationPlumbing Part V - Fittings
Plumbing Part V - Fittings Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 9/21/03 Last Revised: 06/06/2004 There are no Live Steam suppliers in the local area (central Ohio) where one can go and examine
More information2 Cylinder Slidevalve Steam Engine
2 Cylinder Slidevalve Steam Engine By Thor Hansen After making a slide valve engine that I managed to get running I decided to try and make a 2-cylinder version. Since the first one was a vertical steam
More informationBuilding a vertical wobbler
Building a vertical wobbler I wanted to build a simple steam engine that would also run on compressed air. At Chris Heapy s website (http://easyweb.easynet.co.uk) I found drawings of a small double acting
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationChiltern Model Steam Engines
Chiltern Model Steam Engines Mill Twin Cylinder Model Steam Engine v2 Assembly Instructions v1.0 Notes: 1. In overview the engine should first be assembled "dry" with no oil/lubricants, thread lock or
More informationDi-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationPlans for The Siamese Twins
Plans for The Siamese Twins Requests have been pouring in for plans for the Siamese Twins. In fact, another one poured in just last week! So I ve spent the past several days drawing them up. I think it
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationA3 No: OCE-01 APRIL 2014 SHEET:01 OF 06
STEAM IN 0 1.0 0mm BORE x 0mm STROKE DRAWING CONTENTS GENERAL ARRANGEMENT PROJECT No J.A.M. DE WAAL. BRIGHTWELL STREET PAPAKURA 1. NEW ZEALAND. PHONE: OO 09 91. MOB: 0900 E-MAIL: dewaal@xtra.co.nz. DWG
More informationModel: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5
SHEARER/PRESS BRAKE/ SLIP ROLL Model: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5 OPERATION MANUAL 1. USES This machine is used for shearing and bending low carbon plate (mild steel) or the other metal materials
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationSteel-Cylinder Slidevalve Steam Engine
Steel-Cylinder Slidevalve Steam Engine By Thor Hansen After making a single cylinder slide valve engine with a rectangular Cast Iron cylinder I decided to try and make a similar engine with a cylinder
More informationEXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
More informationVertical Steam Engine from barstock
Vertical Steam Engine from barstock By Thor Hansen After having built several small oscillating steam engines and Rudy Kouhoupt s Walking Beam engine I decided to have a go at a slide valve engine. My
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationMUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5
operation Instructions manual MUELLER E-5TM and D-5TM TAble of contents PAGE E-5 General Information 2 Drilling Machines D-5 General Information 3 Operating Instructions 4-5 E-5 Parts 6 D-5 Parts 7! WARNING:
More informationThe Virgo/Libra Steam Engine
The Virgo/Libra Steam Engine Congratulations on becoming the owner of a Virgo or Libra Steam Engine. With careful use and maintenance it will give many years of satisfying performance. Contents 1) Notes
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationScratch Built: Live Steam Garratt
Scratch Built: Live Steam Garratt BY Bill Allen Woodside, CA. USA (Live Steam/Topic: Garratt build photos) (Live Steam/Topic: Garratt Photos Boiler & Cab Construction) (Live Steam/Topic: Tools & Gizmos
More informationA SIX STATION TURRET HEAD
A SIX STATION TURRET HEAD by Ken Metcalfe IN INTRODUCING this piece of workshop equipment, a little explanation of machine tool phraseology would not go amiss. The capstan rest for the tool head of a capstan
More informationSERVICE MANUAL CLINTON FEED OFF THE ARM CHAIN CUTTER WITH EXTERNAL AIR DRIVE MODEL 2115FOTA-V FOR UNION SPECIAL 35800, & YAMATO FD-62 ML2115-7A
ML2115-7A CLINTON FEED OFF THE ARM CHAIN CUTTER WITH EXTERNAL AIR DRIVE MODEL 2115FOTA-V FOR UNION SPECIAL 35800, 36200 & YAMATO FD-62 SERVICE MANUAL 40-0164-01 ML2115-8E I. GENERAL INFORMATION A. The
More information4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back
HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationPunching 3/16" diameter round hole in up to 3/16" thick (flat strip metal).
Wrought Iron Handicrafts, Inc. 3950 10 th Ave NW Rochester MN 55901-1336 507-289-0836 phone 800-456-7738 phone info@metalcraftusa.com email The ultimate dream machine for fabricators and ornamental metal
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationModular Locomotive System Instruction Manual for HBK22 Fowler Body Kit
Modular Locomotive System Instruction Manual for HBK22 Fowler Body Kit Roundhouse Engineering Co. Ltd. Units 6-10 Churchill Business Park. Churchill Road, Wheatley. Doncaster. DN1 2TF. England. Tel. 01302
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationSECTION BASIC MATERIALS AND METHODS
SECTION 15050 BASIC MATERIALS AND METHODS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and Fittings. 1.02 RELATED SECTIONS A. Basic Mechanical Requirements: Section 15010. B. Supports, Anchors, and Seals:
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
More informationMechanical Systems & Tools Syllabus [Detailed]
TECHNICAL TRAINING - SWAPPING DOWNTIME FOR PRODUCTIVITY! Mechanical Systems & Tools Syllabus [Detailed] Your automation.ie Fact Sheets! Understand Mechanical Energy Types! 1 Staying Safe in the Mechanical
More information535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationLockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationPressure Vessel Assembly Instructions
Pressure Vessel Assembly Instructions 1) Measure aluminum tube outer diameter 2) Machine both end caps and only drill pilot holes for all hoes shown 3) Weld both end caps onto the aluminum tube and be
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More informationReliance SG800 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationSECTION - 3 EARTHING CLAMPS & FITTINGS
SECTION - 3 EARTHING CLAMPS & FITTINGS 78 EARTHING CONDUCTOR TO FLAT SURFACE TYPE ESS - SINGLE CONDUCTOR TYPE EST - TWIN CONDUCTOR Types ESS (single conductor) and EST (twin conductor) clamps are designed
More informationALFRA hole punches application overview
ALFRA hole punches application overview ALFRA HOLE PUNCHES MonoCut ALFRA HOLE PUNCHES TriCut ALFRA HOLE PUNCHES TriCut+ ALFRA HOLE PUNCHES TwinCut Suitable for Sheet steel S5 F 70 N/² Stainless steel F
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationCARIBBEAN EXAMINATIONS SECONDARY EDUCATION CERTIFICATE EXAMINATION MECHANICAL ENGINEERING TECHNOLOGY. Paper 02 - Technical Proficiency.
FORM TP 2011094 CARIBBEAN EXAMINATIONS SECONDARY EDUCATION CERTIFICATE EXAMINATION TEST CODE 01335020 COUNCIL MECHANICAL ENGINEERING TECHNOLOGY Paper 02 - Technical Proficiency 2'h hours MAY/JUNE 2011
More informationH2-50 Hydrogen Generator Field Update
This field update is intended to provide extra protection in the event the H2 generation cell fractures or cracks. Please add the additional parts to your H2-50 as soon as possible. Please take a digital
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationILL# Part# QTY REF# MASTER W/STEELS KITS
Borg Warner T35-TB, T37-TB OVERHAUL KITS NI... K19900F... Overhaul Kit, BW35TB Saab 1968-80... 1... N/A NI... K19900G... Overhaul Kit, BW37TB Saab 900 1981-92 & Saab 9000 1981-85... 1... N/A MASTER L/STEEL
More information1. Fasten press to bench or work surface using the mounting holes provided (Item 3).
INSTRUCTIONS AND PARTS LIST FOR Models 1-202, 1-204, 1-210, and 1-220 Air Arbor Presses WARNING LABELS To the left is the safety Alert symbol. When you see these safety alert symbols on your press, be
More informationPiper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
More informationNorman's Grizzly G0602 Reverse Tumbler Plans
Norman's Grizzly G0602 Reverse Tumbler Plans Pictures taken by Norman Author Norman here is the photos of the change gears for the G0602 lathe. reverse turning to the right or for left hand threads netural
More informationSIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationPARTS LIST ELECTRIC BOILERS MODELS: CE24 CE36 CE42 CE48 CE324 CE336 CE342 CE348
PARTS LIST ELECTRIC BOILERS MODELS: CE24 CE36 CE42 CE48 CE324 CE336 CE342 CE348 CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD, DOWNSVIEW, (TORONTO), ONTARIO, CANADA, M3N 1V9 TELEPHONE: (416) 746-2358,
More informationReversing Gear. Shay Reversing Gear
Shay Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 9/23/03 Last Revised: 06/05/2004 The reversing gear is another one of those pieces I've been putting off. The reason for the postponement was that
More informationMagnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
More informationFigure 11 Flange Adapter and Back-Up Ring
Flange Adapters Standard back-up rings are Standard back-up rings are convoluted ductile iron with AWWA C207 150 lb drilling. One edge of the back-up ring bore must be radiused or chamfered. This edge
More informationLamp Parts. H - 1 Order Toll-Free Fax Toll-Free Internet:www.glassplace.com
800-1503 800-1507 800-1504 800-1505 Die Cast Loops These loops are available in a variety of finishes. Just add the letters after the loop number to obtain the finish you want. 800-1506 800-1508 800-1560
More informationLPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationThuys Engineering Parts Lists
Parts Lists The list below was developed for AJS parts, but all nuts and bolts are Cycle Engineering Institute threads that are common on all British motorcycles built before 1970. Contact Details FRAME
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationFINNEY7 SR 5500G TENDER IN ORIGINAL CONDITION
IN ORIGINAL CONDITION Fig 1. Original Appearance Side raves Sanding gear TIA Water treatment system 5500G - 3 5500G TENDER IN REBUILT CONDITION Fig 2. Rebuilt Condition Cut down side raves with fire iron
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationFINNEY7 4500G May17 SR 4500G TENDER. Fig 1. Original Appearance. Side raves Sanding gear Front water fillers TIA Water treatment system
Fig 1. Original Appearance Side raves Sanding gear Front water fillers TIA Water treatment system 4500G - 3 Fig 2. Rebuilt Condition Cut down side raves with fire iron tunnels# TIA removed and replaced
More informationStainless Steel CNC Machined Parts Turned Components :
STAINLESS STEEL CNC MACHINED PARTS TURNED COMPONENTS Stainless Steel CNC Machined Parts Turned Components : We create metal turned parts with virtually any material including aluminum, brass, cast iron,
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More informationMODEL 1500, 2500 & 2700 MANUAL CONTROLS. Service Manual
MODEL 1500, 2500 & 2700 MANUAL CONTROLS Service Manual MODEL 1500, 2500 & 2700 MANUAL CONTROLS Manual Drive Assembly 1 11 2 6 7 9 10 8 PARTS LIST Item No. Quantity Part No. Description 1........... 1............
More information.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
More informationFOR BIS USE ONLY Doc. No. PG 28(1144) August 2008
FOR BIS USE ONLY Doc. No. PG 28(1144) August 2008 PRELIMINARY DRAFT AMENDMENT NO.2 AUGUST 2008 TO IS 13136 : 1991 ARMS AND AMMUNITION RIFLE AIR RIFLE SPRING OPERATED SPECIFICATION [ Pag12,Annex A ] Substitute
More informationBrackets and Tenons. Product Specifications. PB Series
Brackets and Tenons Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion,
More informationClocking a TD-04 Turbo Compressor Housing. Appendix A : AWIC Silicone and Tubing Fitting
Clocking a TD-04 Turbo Compressor Housing Appendix A : AWIC Silicone and Tubing Fitting Revision A: 7-13-2015 Tools: Metric Sockets (10, 12, 14, 17mm) 5mm Hex Key Large Internal Snap Ring Pliers 3/8 Socket
More information( This link will provide you with a list of all ISO-6983 G-Codes
CUSTOM HAZARDS CUSTOM HAZARDS CUSTOM HAZARDS In this lesson I am going to explain how to circle interpolate a 1/8-27 NPT with a formed thread E-Mill using G-Code on a vertical mill. I have provided the
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More information3.1 MUELLER LARGE DRILLING MACHINES
MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available
More information3.1 MUELLER LARGE DRILLING MACHINES
MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More information