Eduphoria Guide To Create a Test
|
|
- Sheryl Hood
- 5 years ago
- Views:
Transcription
1 Eduphoria Guide To Create a Test 1. Begin by logging into Eduphoria. If you do not have the link bookmarked, you can go to and click on the login link for Eduphoria on the top menu bar. 2. You should now see this on the page in front of you. Login with you SAPI information.
2 3. Once you login you should see the following. Click on aware. 4. You should see a page that looks like the one below. It will have your classes listed. 5. To create a new test click on the tests tab on the left side. It is circled above.
3 6. You should now have a page that looks like the one below. Look down at the bottom and you will see Test Options and under that it says Create a new test. Click on create a new test. 7. You should see the page below. Click on the circle next to create a new blank test. Now click on the next button at the bottom right hand corner.
4 8. You should see the page below. Create a title for your test and then click on the drop down box to find your grade level. Then click on the next button at the bottom right hand corner. 9. Now you need to select the middle school folder. 10. Select the course that you teach from the selections shown and then click on the correct grade level. Click on the next button at the bottom right hand corner.
5 11. It will now tell you that you are done and that you have created a new test. Click on the finish button at the bottom right hand corner. 12. Now it is time to add questions to your test. You should see the page below. You should see the name of your test where it says Test Name, the subject you teach under Subject Area, and the grade you teach under Grade Level. To add questions to your test click on the Questions Tab. You can see it is circled below.
6 13. You should see the page below. You can click on the Search Item Bank link to find questions that are pre-written. These questions come from ETS, TEKS Resource System, and WebCat. 14. When you click on the search item bank you will have a new window open with a drop down box that contains the TEKS for your grade level. You can use the drop down boxes to the right to refine your question search. 15. Click on one of the objectives that you want to find questions on and then click Search Item Bank. You will see a list of questions appear, as seen below. To view a question click on the blue arrow on the right hand side. To add a question, click on the plus sign in the green circle.
7 16. Here is an example of what you will see when you view a question. It shows you the correct answer and you will see a check mark in the green circle, when you have added the question. To close the question, click on the blue arrow again. 17. Continue this process until you are finished adding questions. Once you are done, click on the Xclose link at the bottom of that window. You should now see your test with the questions you added. 18. If you want to edit a question, simple place your cursor on that question and you should see two blue arrows, which allow you to move questions up or down, and a green pencil, which allows you to edit the question and answer choices.
8 19. If you edit the question, you should see it appear in a new window. You can move the answer choices, you can get rid of answers, change the question, remove the question, etc. If you change your mind, click the Cancel button or if you are done making changes, click Finish. 20. You can also create your own questions. Click on the Add Question link. 21. Scroll down under the questions you created to find What type of question would you like to create?
9 22. Click on the drop down box to pick the type of question you would like to create. A new window will appear for you to type in your question and answer or answers. If you are doing a selected response, be sure to click on the circle next to the correct answer choice. Click finished when you are done. 23. When you are done with your test, click on the Save Button. This will save it to Eduphoria. You can come back to the test anytime and edit it. 24. If you are ready to print, click on the print button. You will see three choices: Print test booklet, print third-party booklet, and print test key. If you click print test booklet, this will allow the test to open in Adobe and you can save it to your computer or your flash drive and then print it. 25. Once you are done, you can logoff.
Triand Manual
Triand Manual 2014-15 1. Open Internet Explorer and go to http://my.triand.com. 2. This is the Triand. The menu bar is on the top in green. Click on login. 3. Login using your e-mail address and password.
More information2. Now you need to create permissions for all of your reviewers. You need to be in the Administration Tab to do so. Your screen should look like this:
How to set up AppReview 1. Log in to AppReview at https://ar.applyyourself.com a. Use 951 as the school code, your 6+2 as your username, and the password you created. 2. Now you need to create permissions
More information2. This will take you to the Westchester Library System s Digital Media Catalog. The first thing you should do is log in. To do this, click "Login.
1. To begin downloading library ebooks to your Kindle, go to our homepage at www.scarsdalelibrary.org and click on the Downloadable Content button. Then click on the "OverDrive" logo. 2. This will take
More informationScarsdale Public Library 54 Olmsted Road Scarsdale, NY (914) May, 2012
Scarsdale Public Library 54 Olmsted Road Scarsdale, NY 10583 (914) 722-1300 May, 2012 1. To begin downloading library ebooks to your Kindle, go to our homepage at www.scarsdalelibrary.org and click on
More informationHow to Create Website Banners
How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,
More informationScriptPro Menu Script Overview
ScriptPro Menu Script Overview Introduction This document contains an overview of the Worldspan Menu Script available to users on Worldspan Go! Res. File name The file name is Z4MENU.CSL. Need Help? Click
More informationFire CR Calibration Guide
1 Fire CR Calibration Guide This reference guide will guide you through the steps to complete the calibration for the Fire CR.. Getting Started: 1. Click on the Opal Icon on the Desktop. Figure 1 2. Once
More informationWelcome to 6 Trait Power Write!
Welcome to 6 Trait Power Write! Student Help File Table of Contents Home...2 My Writing...3 Assignment Details...4 Choose a Topic...5 Evaluate Your Topic...6 Prewrite and Organize...7 Write Sloppy Copy...8
More informationHow to Start Your Own Fundraising Page
How to Start Your Own Fundraising Page T h e G r e e n 5 K. c o m Thank you for supporting the Green 5K! Whether you re participating, volunteering, or want to raise funds for the cause, these instructions
More informationPhoto Story Tutorial
Photo Story Tutorial To create a new Photo Story Project: 1. Start 2. Programs 3. Photo Story 4. Begin a New Story 5. Next 6. Import Pictures 7. Click on your Flash Drive s name from the window on the
More informationAUTODESK INVENTOR Trial Projects
AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate
More informationCreate a Simple Game in Scratch
Create a Simple Game in Scratch Based on a presentation by Barb Ericson Georgia Tech June 2009 Learn about Goals event handling simple sequential execution loops variables conditionals parallel execution
More informationSubmittals Quick Reference Guide
This topic provides a reference for the Project Center Submittals activity center. Purpose The Submittals activity center in Newforma Contract Management enables you to effectively log submittals and track
More informationHow to Port your Number
How to Port your Number A How To Guide on keeping your old number with nettalk Getting started with a new phone number is tough. You have to call everyone back and give them your new number, especially
More informationLESSON ACTIVITY TOOLKIT 2.0
LESSON ACTIVITY TOOLKIT 2.0 LESSON ACTIVITY TOOLKIT 2.0 Create eye-catching lesson activities For best results, limit the number of individual Adobe Flash tools you use on a page to five or less using
More informationRequesting Letters of Recommendation
Requesting Letters of Recommendation Step 1: Ask your teacher IN PERSON Ask your teacher(s) if they will write a letter of recommendation for you. They are not obligated to do so! Asking them in person
More informationExample Storybird
Storybird Storybird is a visual storytelling community. Anyone can make free visual stories in seconds. Artwork from illustrators and animators is curated from around the world to inspire writers of any
More informationReviewing Your Tax Return In Your Portal
Reviewing Your Tax Return In Your Portal 1. Go to our website www.franklinincpa.com and click on the link at the bottom left of the screen for Client Connect. a. This link will take you to the login screen
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationHarris County Capital Projects Electronic Submittal Guidelines for Consultants
Harris County Capital Projects Electronic Submittal Guidelines for Consultants This document sets forth the guidelines for electronic submittal for consultants as termed by Harris County Capital Projects.
More informationStorybird Instructions for Patrons
Storybird Instructions for Patrons Getting Added to a Storybird Class 1) Visit your local library, make sure you have your library card with you 2) The librarian will ask you for your Storybird username
More informationEpisode 6 9 th 11 th January 90 minutes. Twisted Classics by Rajesh Kumar
Episode 6 9 th 11 th January 90 minutes by Rajesh Kumar Mahabharat rounds will also serve as qualifiers for Indian Championship for year 2016. Please check http://logicmastersindia.com/sm/2015-16.asp for
More informationOnce you have chosen the water world this is how your screen should look.
Getting Started t With Alice By Ruthie Tucker under the direction of Prof. Susan Rodger Duke University, July 2008 www.cs.duke.edu/csed/alice/aliceinschools/ Let s Get Started The first step in making
More informationDIRECTIONS FOR CREATING A WORDPRESS BLOG FOR SCIENCE WRITING ONLINE
DIRECTIONS FOR CREATING A WORDPRESS BLOG FOR SCIENCE WRITING ONLINE Create a science blog on www.wordpress.com AND read other people s science blogs. 1. Open up your internet browser (preferably Google
More informationPebblePad LEARNER HANDBOOK
PebblePad LEARNER HANDBOOK CONTENTS Overview of the online learning environment... 3 Overview of how to find and submit work... 4 Logging Onto the IOS Online... 5 Seeing your Courses... 6 Using Your PebblePad
More informationHarrison Allen s Online Tutor Management System. Online Tutor System Help Sheet
Harrison Allen s Online Tutor Management System Online Tutor System Help Sheet The Harrison Allen Online Tutor Management System This guide is intended to help you get up and running quickly and easily.
More information1. Users may access Campus Transactions Dashboard by clicking the icon on the Home Page or via the Navigator menu.
Running a Campus Transaction Dashboard Report Purpose: Dashboard reports allow the user to quickly search for transactions to determine payment and posting status by funding source data, supplier, and
More informationKaltura CaptureSpace Lite Desktop Recorder: Editing, Saving, and Uploading a Recording
Kaltura CaptureSpace Lite Desktop Recorder: Editing, Saving, and Uploading a Recording For this handout, we will be editing the Screen Recording we created in the Kaltura CaptureSpace Lite Desktop Recorder
More informationSolidworks Tutorial Pencil
The following instructions will be used to help you create a Pencil using Solidworks. These instructions are ordered to make the process as simple as possible. Deviating from the order, or not following
More informationUsing Puzzilla.org to Find a Family to Research
ADOPT-A-FAMILY #1: Using Puzzilla.org to Find a Family to Research Go to puzzilla.org and click sign in Sign in with your FamilySearch login Click OK to allow Puzzilla to load your tree from FamilySearch
More informationCTC eforms for Records & Registration. Submitting and Routing eforms Census Rolls
CTC eforms for Records & Registration Submitting and Routing eforms Census Rolls Login to CTC eforms To get to the eforms webpage, you can type the URL directly in the web browser search bar. Or- https://ctceforms.ctcd.edu
More informationGuide to OverDrive for Students
Guide to OverDrive for Students Contents Getting Started Pg. 2 Finding our Library Pg. 4 Finding a Book I Want to Read Pg. 7 How do I Know if a Book is Available to Borrow? Pg. 11 How do I Borrow a Book?
More informationRegistering for Corban Accelerated Online
Registering for Corban Accelerated Online These are the steps you are about to complete: Login to SIS Search for your course(s) Select the course(s) Add to your schedule Pay for your course(s)* You re
More informationMANUAL FOR ONLINE DRAWING APPROVAL TRACKING SYSTEM
MANUAL FOR ONLINE DRAWING APPROVAL TRACKING SYSTEM Online tracking system for Drawing Approval is a web application developed by NIC and IT Department, BSPTCL that facilitates all the stakeholders i.e.
More informationSalt Marsh Dynamics. Contents. How to Begin - Second Life Account Creation Guide
Page 1 Salt Marsh Dynamics This document will guide you in creating your Second Life account for Salt Marsh Dynamics. Contents Creating your Second Life Account... 2 Second Life Client Download... 5 Second
More informationGeometer s Skethchpad 7th Grade Guide to Learning Geometry
Geometer s Skethchpad 7th Grade Guide to Learning Geometry This Guide Belongs to: Date: 2 -- Learning with Geometer s Sketchpad **a story can be added or one could choose to use the activities alone and
More informationSTUDENT USER S MANUAL
Cleveland State University College of Education and Human Services CSU eportfolio STUDENT USER S MANUAL (Use this manual if you are keeping your entire portfolio on the eportfolio system and using the
More informationYOUNG LIVING FAQ SOCIAL MEDIA 101
YOUNG LIVING FAQ SOCIAL MEDIA 101 Q How will social media benefit my business? A Consumers are turning more and more frequently to peer recommendations when making purchasing decisions. Recent surveys
More informationUNIVERSITY OF CENTRAL FLORIDA FACILITIES OPERATIONS STANDARD OPERATING PROCEDURE
Page: 1 of 22 PROCEDURE: INTENDED AUDIENCE: PURPOSE: Creating a New Query on your WorkDesk All Campus personnel with access to AiM. Creating queries on individual WorkDesk organizes the work order and
More informationOrganizing and Customizing Content
Organizing and Customizing Content JUMPSTART Session 2: Organizing and Customizing Content Welcome to this Jumpstart session on Organizing and Customizing Content. We hope you have had a chance to explore
More informationPlacing Notes on the Rectangular Problem
C h a p t e r 4 Placing Notes on the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Use the tools and toolbar for simple 2D Computer Aided Drafting (CAD)
More informationAfter you have completed the tutorial, you will be given an initial knowledge check by ALEKS to determine what topics you already know so ALEKS can
How ALEKS Works After you have registered in ALEKS, you will get a brief introduction to ALEKS and then you will be given a quick tutorial on how to enter answers in ALEKS: After you have completed the
More informationHow To Graphically Analyze Production History Data
How To Graphically Analyze Production History Data March 25, 2004 MICA can plot production history on a semi-log graph, analyze any section of the production history with a least squares regression and
More informationCreo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
More informationMicrosoft Excel Lab Two (Completed 03/02/18) Transcript by Rev.com. Page 1 of 6
[00:00:31] Speaker 1: Hello everyone and welcome to excel lab two. To get started with this lab you will need two files. You will need excel lab two instructions file also, you will need excel lab two
More informationFEI Quanta 200 ESEM Basic instructions
FEI Quanta 200 ESEM Basic instructions Desktop and then start the UI. If the computer has restarted and you need to login, Username: supervisor and Password: supervisor Log-in to the Microscope using the
More informationTry what you learned (and some new things too)
Training Try what you learned (and some new things too) PART ONE: DO SOME MATH Exercise 1: Type some simple formulas to add, subtract, multiply, and divide. 1. Click in cell A1. First you ll add two numbers.
More information[DOING AN ODA: STEP-BY-STEP INSTRUCTIONS]
How to do Oral Diagnostic Assessments (ODAs) Table of Contents What is an ODA?... 1 Check the Headset Volume... 2 Check the Headset Microphone Using Audacity... 3 Log into Coursework... 4 Select Your Microphone,
More informationTimekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring User Guide
Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring 2004 User Guide Team 2 Edward Bangs Bryan Berry Chris Damour Kim Monteith Jonathan Szostak 1 Table of
More informationEasily Accessing Current Courses on D2L
Easily Accessing Current Courses on D2L There are two ways to make courses easier to access on D2L: 1. Pinning courses in the Select a course menu 2. Collapsing semesters in the My Courses widget Note:
More informationPhysical Inventory System User Manual. Version 19
Physical Inventory System User Manual Version 19 0 Physical Inventory System User Manual 1 Table of Contents 1. Prepare for Physical Inventory... 2. Chapter 1: Starting Inventory... 2.1. CDK/ADP... 3.
More informationFIRST STEPS APP INSTALLATION FAQS GETTING STARTED SELF COACHING SCHOLARS. by The Life Coach School
FIRST STEPS APP INSTALLATION FAQS GETTING STARTED SELF COACHING SCHOLARS by The Life Coach School CONTENTS Welcome from Brooke...1 Install the App... 2 Getting Started... 3 FAQs... 4 What do I do when
More informationGetting Started with Kurzweil 3000 for Macintosh
Getting Started with Kurzweil 3000 for Macintosh Kurzweil 3000 for Macintosh Trial Software Welcome. The Kurzweil 3000 Getting Started Guide is your first step on the road to successful learning for yourself
More informationAccessing e-books with your e-reader
e-reader 1 Accessing e-books with your e-reader What you need to know about library e-books is that each one is protected by Digital Rights Management (DRM). This means that access to e-books is restricted
More informationHow to Build a LimeSurvey: The Basics for Beginners
1 How to Build a LimeSurvey: The Basics for Beginners Login and view a list of your surveys. We will give you 3 templates to start with. These are the ethics compliant templates you need to protect participant
More informationOverDrive for PC, Mac, and Nook or Kobo ereaders. Contents
OverDrive for PC, Mac, and Nook or Kobo ereaders Contents Get the Adobe Digital Editions Guide Searching and Browsing Borrowing and Downloading Reading Transferring your ebook to a Nook or Kobo ereader
More informationRevision for Grade 6 in Unit #1 Design & Technology Subject Your Name:... Grade 6/
Your Name:.... Grade 6/ SECTION 1 Matching :Match the terms with its explanations. Write the matching letter in the correct box. The first one has been done for you. (1 mark each) Term Explanation 1. Gameplay
More informationSony Soloist will allow you to do all of these same operations digitally, that is to say, on a computer & without a cassette!
Cy-Fair College Language Labs Making & Saving Videos with Sony Soloist What is Sony Soloist? Sony Soloist is a computer program running on all student stations in the language labs. You will notice that
More informationOnline Check-in Information for 2016 Magic Cup
Online Check-in Information for 2016 Magic Cup **Please note that all rosters must be updated by Noon the Thursday before the tournament. Only players that are on your gotsoccer roster by Thursday Noon
More informationCreating Digital Stories for the Classroom
Using Photo Story 3 to Create a Digital Story Creating Digital Stories for the Classroom When you open Photo Story 3 you have a few options. To begin a new story select the option Begin a New Story and
More informationEngineering Innovation Center Autodesk Fusion 360
Engineering Innovation Center Autodesk Fusion 360 Introduction The Engineering Innovation Center is a large academic maker space with plenty of tools and equipment. In order to use these items you must
More informationStar Defender. Section 1
Star Defender Section 1 For the first full Construct 2 game, you're going to create a space shooter game called Star Defender. In this game, you'll create a space ship that will be able to destroy the
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More information2809 CAD TRAINING: Part 1 Sketching and Making 3D Parts. Contents
Contents Getting Started... 2 Lesson 1:... 3 Lesson 2:... 13 Lesson 3:... 19 Lesson 4:... 23 Lesson 5:... 25 Final Project:... 28 Getting Started Get Autodesk Inventor Go to http://students.autodesk.com/
More informationLab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
More information**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB
**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB GETTING STARTED Step 1. Login to your COE account with
More informationThe Basic RAW Image Processing Workflow In PSE 2018
The Basic RAW Image Processing Workflow In PSE 2018 This tutorial will illustrate the basic workflow or steps that are generally done when a RAW image is edited in PSE 2018. Saving the edited file as part
More informationGuide for Converting Your Deposit to Broadway Season Seats
Guide for Converting Your Deposit to Broadway Season Seats 1. Sign in with the e-mail that you made your deposit(s) with. Forgot your password? That s OK! Just click forgot password to create a new one.
More informationGETTING STARTED WITH GOOGLE S SCIENCE JOURNAL
GETTING STARTED WITH GOOGLE S SCIENCE JOURNAL ABOUT SCIENCE JOURNAL Google s Science Journal (GSJ) is a digital science notebook that allows users to conduct experiments and record their results all in
More informationFastAttach Stand Alone User Guide
FastAttach Stand Alone User Guide Revision Date: 09/15/2017 This guide covers the use of FastAttach Stand Alone. The FastAttach application must be installed on the workstation prior to these steps. If
More informationBLACKBOARD LEARN 9.1: BASIC TRAINING- PART 1
BLACKBOARD LEARN 9.1: BASIC TRAINING- PART 1 Beginning of Part 1 INTRODUCTION I m Karissa Greathouse, for those of you that don t know me. I think I know almost everybody in here, but some of you may not
More informationBefore You Begin Page 11 Axis 360 Page 12. OneClickdigital Page 14
Table Of Contents Apps (Use With Tablets & Smartphones) axisreader App (Nook, ipad, Samsung) Page 3 Blio App (Kindle Fire only) Page 6 OneClickdigital App (Any Device) Page 9 ereaders (Use With Nook or
More informationManaging images with NewZapp
Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account
More informationNote: These directions are for Paint on WindowsXp and Vista. At the end of this tutorial are features of Paint for Windows 7.
The Power of Paint Note: These directions are for Paint on WindowsXp and Vista. At the end of this tutorial are features of Paint for Windows 7. Your Assignment Using Paint 1. Resize an image 2. Crop an
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More information10.2. Scanning Document Camera Scoring. Page 1 of 5. How do I score answer sheets using a document camera? STEP 1
Step by Step How do I score answer sheets using a document camera? STEP 1 Click on the Assessment icon in the top navigation bar. STEP 2 To locate your assessment in an assessment list, first select the
More informationWeekly Webinar: Facebook Fan Pages And Beyond. Copyright 2010 Century 21 Real Estate LLC. All rights reserved.
Weekly Webinar: Facebook Fan Pages And Beyond Agenda Using Facebook for Business Facebook Fan Page Basics What is the difference between my Timeline and my Business/ Fan Page? How Do I Create a Fan Page?
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationMEDIA CONVERSION PROJECT: DIGITIZING HISTORIC PHOTOS
MEDIA CONVERSION PROJECT: DIGITIZING HISTORIC PHOTOS What you need to know: Basic understanding of a computer What you need: Computer Epson Perfection V550 Scanner (available in the Southglenn and Smoky
More informationCreo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School
Creo: Hole, Fillet, and Round Layout/Dimension Tutorial Layout of a Part with Holes 1. Open a blank drawing with your border and title block By: Matthew Jourden Brighton High School 2. Place the front,
More informationQuintic Software Tutorial 3
Quintic Software Tutorial 3 Take a Picture 1 Tutorial 3 Take a Picture Contents Page 1. Photo 2. Photo Sequence a. Add shapes and angles 3. Export Analysis 2 Tutorial 3 Take a Picture 1. Photo Open the
More informationMath Module Courses Orientation
Math Module Courses Orientation Independent Study Mathematics Opportunities Please pick up a red folder and make sure you get a course code handout, a yellow module log, and a blank contract. Name: Rochelle
More informationLibrary ebooks and Your Kindle
Library ebooks and Your Kindle Library ebooks now can be read on your Kindle. You need a computer with an Internet connection, and a valid library card. When using your Kindle for the first time, you will
More informationMy Blogs: To Add New Blog Post: o Click on the My Learn360 link. You will then see eight different tabs (below).
My Blogs: Every user on Learn360 is given one blog. A blog can be shared throughout Learn360 and there is no limit to the number of blog posts. Blogs are a great way for teachers to interact with students
More informationClick on design to start creating your ad
Designing your ad in Pictavo Go to www.carolinayearbooks.com, click on top toolbar for senior ads Find your school and click at the bottom select It will then ask you again to find your school, write It
More informationSolidworks tutorial. 3d sketch project. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial 3d sketch project A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m we will create this frame during the tutorial : In this tutorial
More informationGetting Started. Right click on Lateral Workplane. Left Click on New Sketch
Getting Started 1. Open up PTC Pro/Desktop by either double clicking the icon or through the Start button and in Programs. 2. Once Pro/Desktop is open select File > New > Design 3. Close the Pallet window
More informationTable of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationSkeeterSoft s National Pastime III Simulated Baseball Game
SkeeterSoft s National Pastime III Simulated Baseball Game File Save/Import Game The following game has just been completed. After clicking the OK Button you have a choice of saving the game to a file.
More informationGetting Started with. Vectorworks Architect
Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program
More informationWorking with Live Paint
Adobe Illustrator Working with Live Paint In Illustrator CS2, Adobe introduced the Live Paint feature, which revolutionized how a designer artist could add color to a drawing. The Live Paint feature allows
More informationGetting started with Search the online area wide prospectus student guide
Getting started with Search the online area wide prospectus student guide Applications for post 16 courses will be made online through the website www.ucasprogress.com know locally as Search and Apply
More informationOwner User Guide Paying an Invoice
Owner User Guide Paying an Invoice August 2017 v.1 1 Contents 1. Invoice Enquiry... 3 2. Printing Your Invoice... 7 3. Paying Your Invoice... 8 2 1. Invoice Enquiry Log on to www2.racingadmin.co.uk with
More informationMobile Application Training
Mobile Application Training NPMStaffing.com Ready to Work on Your Terms? At NPM Staffing, your next job is now at your fingertips. Our mobile application is easy to use and allows you to work when you
More informationTo Easily Navigate this Presentation See that the Full Page is Showing and then Use Page Up and Page Down Keys or Right and Left Keyboard Arrow Keys
Top Left Top Right To Easily Navigate this Presentation See that the Full Page is Showing and then Use Page Up and Page Down Keys or Right and Left Keyboard Arrow Keys Bottom Left Bottom Right Unite with
More informationLogging into Five9 Telephony
Logging into Five9 Telephony VOICE AUTHENTICATE BEFORE ATTEMPTING TO LOG IN Go to the Citrix Home Page at https://trcforecast.westat.com/trccitrix/sitepages/home.aspx Select the Citrix Login link next
More informationThe Basics. By Jenna Hayes under the direction of Professor Susan Rodger Duke University July
Getting Started With Alice: The Basics By Jenna Hayes under the direction of Professor Susan Rodger Duke University July 2008 www.cs.duke.edu/csed/alice/aliceinschools Step 1: Background Open up Alice,
More informationDrawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.
Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the
More informationCreate a Flowchart in Word
Create a Flowchart in Word A flowchart is a diagram of steps, movements or actions involved in a system or activity. Flowcharts use conventional geometric symbols and arrows to define relationships and
More informationDrawing Layouts Paper space & Model Space
Drawing Layouts Paper space & Model Space Users of Bricscad will have seen the tabs at the bottom left of the drawings area labelled: Model, Layout1, Layout2 but may not know how to use them or what they
More information