WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
|
|
- Arnold Horn
- 6 years ago
- Views:
Transcription
1 UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room A3. Demonstrate how technological progress promotes the advancement of science, technology, engineering and mathematics (STEM). Classroom rules Syllabus Class expectations What are the rules, procedures and class exceptions? Syllabus Computer projector
2 UNIT: Measurement NO. OF DAYS: 5 KEY LEARNING(S): Accurate measurement UNIT : Why is accurate measurement important in drafting and engineering? D1: Refine a design by using prototypes and modeling to ensure quality, efficiency, and productivity of a final product. Ruler / tape measure Architecture scale How do you read a ruler and measure to the nearest 1/16th of an inch? Rulers Tape measures worksheets
3 UNIT: Hand Drawing NO. OF DAYS: 18 KEY LEARNING(S): Drafting tools, 2d, multi view, and isometric drawings UNIT : What hand drafting skills and processes do engineers utilize when drawing and drafting projects or blueprint? A2. Interpret how systems thinking applies logic and creativity with appropriate comprises in complex real-life problems. Drafting line types Title block Drawing layout What are the various line types that are used in hand drafting? How do I setup a title block and what is its importance? What steps are necessary to replicate the assigned drawing? 30,60,90 triangle triangle Pencil and eraser Eraser shield Drafting desk and paper Eraser shield 30,60,90 triangle triangle Projection lines Orthographic Projection What views are associated with orthographic projection and why are they important? Isometric drawings How are Isometric drawings created and what tools are used?
4 UNIT: AutoCAD layers and dimensions NO. OF DAYS: 30 KEY LEARNING(S): CAD drawing tools, manipulation tools, Dimensions UNIT : What tools are used in AutoCAD to Drawing and manipulate objects? D1. Refine a design by using prototypes and modeling to ensure quality, efficiency, and productivity of a final product D2. Verify that engineering design is influenced by personal characteristics, such as creativity, resourcefulness, and the ability to visualize and think abstractly. Line Circle Arch Polygon Layers Move Rotate Erase Trim Fillet Dimensions and annotations What are the basic commands in AutoCAD to create an object? What tools in AutoCAD are there to manipulate what has been drawn? What dimensions and annotations are need with various CAD drawings Computers Auto Cad Vision Projector Commands Fillet
5 UNIT: Floor plans NO. OF DAYS: 10 KEY LEARNING(S): Floor plan layout UNIT : What are the basic items needed to include in a floor plan? D1. Refine a design by using prototypes and modeling to ensure quality, efficiency, and productivity of a final product D2. Verify that engineering design is influenced by personal characteristics, such as creativity, resourcefulness, and the ability to visualize and think abstractly. Interior and exterior walls Depicting doors and windows in CAD Floor plan symbols in Auto CAD How are various items in a floor plan depicted in CAD? How Do I access the library within CAD? Computers Auto Cad Vision Projector
6 UNIT: Isometric drawing in Auto Cad NO. OF DAYS: 25 KEY LEARNING(S): Isometric setting and multi view drawings in Auto Cad UNIT : How to I draw multi view and isometric in Auto Cad C2. Analyze a prototype and/or create a working model to test a design concept by making actual observations and necessary adjustments. Multi view CAD drawings Isometric drawings How Do I operate the CAD software to complete a Multi view drawing? How to I setup and draw isometric cad drawings? Computers Auto desk software Projector Vision software Isometric Multi view
Computer Aided Design I
Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May
More informationEntry Level Assessment Blueprint Architectural Drafting
Entry Level Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Preparing to Draw Identify drafting tools, materials, and
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationINTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing
INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 05 Catalog Course Description:
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationIntroduction to Drafting Design
Introduction to Drafting Design Unit: 1 Content Standard(s) and Orientation 1. Relate the importance of drafting design technology in today s technological work force. Learning Objective(s) and Essential
More informationGrade Level Benchmarks and Components
Grade Level Benchmarks (GLB) describe the concepts and skills we want students to know and be able to demonstrate in each grade level and each course. Teachers will assess student academic performance
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationReavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD)
Reavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD) Unit 1: Introduction In this unit, students will identify components of a Computer Aided Design (CAD) system and how to
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104) Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 3.0 Revised: Spring
More informationCADD I. A1 A2. I can recall from my notebook all course content and grading procedure. A3. I can list 3 ways Cadd impacts industry. B.
St. Michael Albertville High School Teacher: Scott Danielson CADD I September 2016 CADD 1 Content Skills Learning Targets Standards Assessment Resources & Technology CEQ: WHAT AND HOW IS COMPUTER AIDED
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationApplications of Technology. High School
Planned Course of Study pplications of Technology High School NORTHWESTERN LEHIGH SCHOOL DISTRICT 6493 ROUTE 309 NEW TRIPOLI, P 18066 NORTHWESTERN LEHIGH SCHOOL BORD 2011 Gregory W. Snyder, President Sally
More informationIndustrial Technology Curriculum
Industrial Technology Curriculum Written 2009-2010 Mission Statement: Industrial Technology The Mission of the Oskaloosa Community School Industrial Technology Department is to provide opportunities to
More informationOrthographic Drawing (Architectural Board Drafting)
Design and Drafting Description In this activity, the teacher will introduce orthographic projection, in which a multi-view drawing shows how the sides of an object are related to each another. Students
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationSYLLABUS. Apprenticeship Training Scheme
SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More informationArchitectural Drafting
Measuring What Matters in Job Ready Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Copyright 2012 General Assessment Information Blueprint Contents General Assessment Information
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationTechnology Education Department
Department Technology Education The technology education curriculum is designed to provide a balanced mix of theoretical and practical knowledge with an abundant amount of hands-on activities included
More informationTutorial 2: Setting up the Drawing Environment
Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we
More informationAIU Exam Introduction to Architectural Design & Drafting
AIU Exam Introduction to Architectural Design & Drafting School: Science & Engineering Major: Architecture Course title: Introduction to Architectural Design & Drafting Credits for course: 3 credits Description
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationSTUDY SET 03 ENGINEERING GEOMETRY
STUDY SET 03 ENGINEERING GEOMETRY PROBLEMS FOR LABORATORY WORK 3.1 Coordinate Exercise 1 Draw the shape using the coordinate values. 3.2 Coordinate Exercise 2 Draw the shape with the given dimensions.
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationOFFICE OF CURRICULUM & INSTRUCTION DRAFTING I. Grades Credits: 5
OFFICE OF CURRICULUM & INSTRUCTION DRAFTING I Grades 9-12 Credits: 5 ABSTRACT Drafting I offers the student an excellant foundation in drafting with hands- on experience in the development of individual
More informationAutodesk AutoCAD Architecture 2015 Fundamentals
Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More information1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad
1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work
More informationMIDLAND COLLEGE SYLLABUS DFTG 1305 TECHNICAL DRAFTING 2-4
Course Description: Text, References, and Supplies: A computer-aided modeling course. Development of three-dimensional drawings and models from engineering sketches and orthographic drawings and utilization
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationARCHITECTURAL DESIGN (542)
DESCRIPTION This is the first assessment in a sequence, Architectural Design I prepares students with knowledge of residential architectural and related construction. Topics include; architectural blueprint
More informationZooming in on Architectural Desktop Layouts Alexander L. Wood
December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD
More informationMISS. HANNA S CLASSROOM RULES
MISS. HANNA S CLASSROOM RULES 1. My students never fail. I believe in you and so shall you! Miss. Hanna s Quote! 2. Come to class on time. 3. Bring a positive attitude. 4. Come prepared and bring your
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationEMT TECHNICAL GRAPHICS Lab Manual (Syllabus) Fall 08
EMT 1120 - TECHNICAL GRAPHICS Lab Manual (Syllabus) Fall 08 1 Credit, 3 Class Hours Course Description: This course will provide theory and training on basic electrical and mechanical drawing. The student
More informationCreate a Simple Architectural Structure (Architectural CAD)
Description In this activity the teacher will demonstrate how to transform the 2D floor plan into a 3D structure, using the plan created in the Drawing of a Simple Building activity. Lesson Objectives
More informationDrawing Standards & Conventions for IDD
Drawing Standards & Conventions for IDD This document consists of a set of standards that have been developed to maintain a consistency in Interior Decoration and Design students work. The standards are
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115) Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Fall 08 Catalog
More informationContent Area: Mathematics Course: CAD Grade Level: R14 The Seven Cs of Learning. 2-3 weeks. 3-4 weeks. 3-4weeks
Content Area: Mathematics Course: CAD Grade Level: 10-12 R14 The Seven Cs of Learning Collaboration Character Communication Citizenship Critical Thinking Creativity Curiosity Unit Titles The development
More informationEL DORADO UNION HIGH SCHOOL DISTRICT Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Engineering Design and Architecture I (#0517)(Formerly Drafting 1 #0510) Rationale: This course in Engineering Design will introduce students to the fundamentals
More informationCURRICULUM MAP. Course/ Subject: Principles of Technology Grade: Month: Sept-Oct (Communication) Enduring Understanding
CURRICULUM MAP Course/ Subject: Principles of Technology Grade: 9-12 Month: Sept-Oct (Communication) Enduring Understanding Technology is created, used and modified by humans. A technological world requires
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationStrengthened Technical-Vocational Education Program COURSE DESIGN
COURSE DESIGN COURSE TITLE : DRAFTING TECHNOLOGY NOMINAL DURATION : 1200 HOURS QUALIFICATION LEVEL : NC II COURSE DESCRIPTION : This course is designed to enhance the knowledge, skills, and positive attitudes
More informationDevelop an Interior perspective from a floor plan using 2 points. using orthographic projection techniques
Develop an Interior perspective from a floor plan using 2 points using orthographic projection techniques Obtain a floor of the space to be drawn Digital or hand drawn plan Plan must be to scale Often
More informationUsing Engineer and Architect Scales
Using Engineer and Architect Scales NOTE: When PRINTING this document, be sure the pull down menu next to Print Scaling in the Print Dialog window is set to None. This will ensure the sample drawings will
More informationChapter 1 Overview of an Engineering Drawing
Chapter 1 Overview of an Engineering Drawing TOPICS Graphics language Engineering drawing Projection methods Orthographic projection Drawing standards TOPICS Traditional Drawing Tools Lettering Freehand
More informationIED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.
IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources
More informationChapter 5 Sectional Views
Chapter 5 Sectional Views There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved
More informationRelease: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Release: 1 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Modification History
More informationUnified School District of De Pere Tech. Ed. And Engineering Intro to Construction
Tech. Ed. And Engineering Intro to Construction A. Students will understand that technology is an extension of human capability. B. Students will recognize that systems are made up of individual components
More informationBCN 1251C Construction Drawing Section: Credits Spring 2016
BCN 1251C Construction Drawing Section: 5889 3 Credits Spring 2016 Meeting Location: RNK210 Meeting Time: T, R 8-9 Periods Instructor: Yuanxin 'Alex' Zhang Logan K. To Ph.D. Candidate Office: RNK324 Office:
More informationAutoCAD Architecture 2018 Fundamentals
Elise Moss Autodesk AutoCAD Architecture 2018 Fundamentals SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationCOURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018
COURSE OF STUDY UNIT PLANNING GUIDE FOR: ARCHITECTURE G RADE LEVEL: 11 12 5 CREDITS CURT BANICKI 1 F ULL YEAR PREPARED BY: MICHAEL WEBER, ASST. PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR JULY 2018 DUMONT
More informationCourse Outcome Summary
Course Information: Description: Carpentry This class introduces students to basic carpentry practices, such as the use of hand and power tools, measurement, and layout practices. Skills will then be used
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationSubject Description Form
Subject Description Form Subject Code Subject Title Credit Value BRE222 Workshop Practices and Draftsmanship 3 Academic Credits Level 2 Pre-requisite/ Co-requisite/ Exclusion Objectives Nil 1) Provide
More informationtechnical drawing school of art, design and architecture nust spring 2011
technical drawing school of art, design and architecture nust spring 2011 http://www.youtube.com/watch?v=e55ocgb0l8o t e c h n i c a l d r a w i n g a mean to design reasoning spring 2011 the ability to
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationACT-IED-1. Students will identify the disciplines related to engineering drawing and design professions.
PROGRAM CONCENTRATION: CAREER PATHWAY: COURSE TITLE: Architecture, Construction, Communications & Transportation Engineering Drawing & Design Introduction to Engineering Drawing and Design Introduction
More informationIsometric Drawing Chapter 26
Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like
More informationEngineering Drafting and Design I
Title Engineering Drafting and Design I Type Consensus Document Map Authors Steven Shuttlesworth, Paul Wood Subject Industrial/Technology Education Course Engineering Drafting and Design I Grade(s) 09,
More information9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN
SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI
More informationTwo-Dimensional Drawing
22 Chapter Cxxxx 40757 3/19/08 10:24 AM Page 1 7% 3% 3% 18% 20% 22 Chapter CXXXX 40757 Page 1 03/18/08 MD 22 Two-Dimensional Drawing objectives After completing this chapter, you should be able to Identify
More informationAngelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus
Angelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus Date approved 8/21/18 Date revised 8/21/18 I. BASIC COURSE INFORMATION A. Course Description:
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationDrafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
More informationIsometric Drawing Paper Print Out
ISOMETRIC DRAWING PAPER PRINT OUT PDF - Are you looking for isometric drawing paper print out Books? Now, you will be happy that at this time isometric drawing paper print out PDF is available at our online
More informationIntroduction to Site Layout Annotated Instructor s Guide. Module PREREQUISITES MODULE OVERVIEW OBJECTIVES PERFORMANCE TASKS
Introduction to Site Layout Annotated Instructor s Guide Module 78101-04 MODULE OVERVIEW This module provides an overview of the site layout trade and related tasks. The use of the builder s level and
More informationME1105 Engineering Drawing & Design
City University London Term 1 Assessment 2008/2009 School of Engineering and Mathematical Sciences ME1105 Engineering Drawing & Design Student Name:.., Group: Examination duration: Reading time: This paper
More informationScale and Dimensioning (Architectural Board Drafting)
Youth Explore Trades Skills Description In this activity, the teacher will first select an object that is larger than the page and scale it to fit in the designated drawing area to explain architectural
More informationAssignment 12 CAD Mechanical Part 2
Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden
More informationSKKK 1021 Engineering Drawing
SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use
More information1. Introduction. Competencies gained after completion of course The competencies covered in this course are as under:
1 P a g e Contents: 1. Introduction... 4 Overall objective of course... 4 Competencies gained after completion of course... 4 Job opportunities available immediately and in the future... 4 Trainee entry
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationAutoCAD 2D. Table of Contents. Lesson 1 Getting Started
AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction
More informationContent Area: Career Education Department: Technology Course: Advanced Engineering and Architectural Drawing
SHORE REGIONAL HIGH SCHOOL DISTRICT West Long Branch, New Jersey Content Area: Career Education Department: Technology Course: Mr. Leonard Schnappauf, Superintendent/Principal Dr. Robert McGarry, Director
More informationComputer Aided Drafting & Design (CADD)
Elizabethtown Area School District Computer Aided Drafting & Design (CADD) Course Number: 762 Length of Course: 1 semester 18 weeks Grade Level: 10-12 Elective Total Clock Hours: 120 hours Length of Period:
More informationSKILL BUILDING. Learn techniques helpful in building prototypes. Introduction 02 Prototyping. Lesson plans 03 Prototyping skills
SKILL BUILDING Learn techniques helpful in building prototypes. Introduction 02 Prototyping Lesson plans 03 Prototyping skills Resources 11 Skills stations Introduction 2 DID YOU KNOW? Prototyping is the
More informationTenviewing a Solid. In this chapter, we will learn the following to World Class standards:
C h a p t e r 15 Tenviewing a Solid In this chapter, we will learn the following to World Class standards: Converting 3D Solids to 2D Orthographic Views Opening the Solid Part Drawing Loading Tenview.LSP
More informationMidterm Exam_STUDY GUIDE_70 questions
Class: Date: CADD 2 Midterm Exam_STUDY GUIDE_70 questions Multiple Choice Identify the choice that best completes the statement or answers the question. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1. Producing computer
More informationD e s i g n D r a f t i n g E s s e n t i a l s 1 ( 1 0 )
8 4 3 5 D e s i g n D r a f t i n g E s s e n t i a l s 1 ( 1 0 ) 20S/20E/20M A Design Drafting Course 8 4 3 5 D e s i g n D r a f t i n g E s s e n t i a l s 1 ( 1 0 ) 2 0 S / 2 0 E / 2 0 M Course Description
More informationAutoCAD Essentials. Course Length: 3 days
AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD
More informationAutoCAD 2014 Tutorial - First Level: 2D Fundamentals
AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationCOASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) Introduction to Blueprint Reading for Welders
COASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) WLDG 1313: Introduction to Blueprint Reading for Welders Semester Hours: 3 Textbooks: Blueprint Reading For Welders, by A.E. Bennett & Louis J. Siy,
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationResidential Design Using AutoCAD 2018
Daniel John Stine CSI, CDT Residential Design Using AutoCAD 2018 Includes video instruction SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment
More informationCreating a 2D Drawing in Paper Space
C h a p t e r 16 Creating a 2D Drawing in Paper Space In this chapter, we will learn the following to World Class standards: 1. Converting 3D Solids to 2D Orthographic Views 2. Open the Solid Part Drawing
More informationHigher Graphic Communication. Homework. Knowledge and Interpretation. Name. Page
Higher Graphic Communication Homework Knowledge and Interpretation Name Page Homework 1 Q1. For each of the following lines name each and explain where it would be used on a drawing. A coloured electronic
More informationLABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F
LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F List of Experiments:- Sl. No. Name of experiment Date Signature 01 02 Setting up of drawing environment by setting drawing limits, drawing units, naming
More informationProject Booklet. Structural Drafting with AutoCAD
Project Booklet Structural Drafting with AutoCAD Introduction 1 General Setup 2 Border and Title Block 3 Drafting the Foundation Plan (Plate 1) 8 Drafting the South Elevation (Plate 2) 11 Drafting Section
More information