# First Level 2D Fundamentals

Size: px
Start display at page:

Transcription

1 AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices.

4 Table of Contents xiii Visual Reference 1-10 GRID ON 1-11 SNAP Mode ON 1-12 Using the ERASE Command 1-13 Repeat the Last Command 1-14 The CAD Database and the User Coordinate System 1-15 Changing to the 2D UCS Icon Display 1-16 Cartesian and Polar Coordinate Systems 1-17 Absolute and Relative Coordinates 1-17 Defining Positions 1-18 Grid Style Setup 1-18 The Guide Plate 1-19 Creating Circles 1-23 Saving the CAD Design 1-25 Close the Current Drawing 1-26 The Spacer Design 1-27 Start a New Drawing 1-27 Drawing Units Setup 1-28 Drawing Area Setup 1-29 Using the Line Command 1-31 Using the ERASE Command 1-33 Using the Arc Command 1-33 Using the Circle Command 1-35 Saving the CAD Design 1-36 Exit AutoCAD 1-36 Review Questions 1-37 Exercises 1-38 Chapter 2 Basic Object Construction Tools AutoCAD Certified User Examination Objectives Coverage 2-2 Introduction 2-3 Starting Up AutoCAD Dynamic Input 2-4 The RockerArm Design 2-7 Activate the Startup Option 2-8 Drawing Units Display Setup 2-9 GRID and SNAP Intervals Setup 2-10 Drawing Area Setup 2-11 Referencing the World Coordinate System 2-12 Creating Circles 2-13 Object Snap Toolbar 2-14 Using the LINE command 2-15 Creating a TTR Circle 2-17 Using the TRIM Command 2-19

7 xvi AutoCAD 2016 Tutorial: 2D Fundamentals Top View to Side View Projection 5-21 Completing the Front View 5-23 Object Information Using the List Command 5-25 Object Information Using the Properties Command 5-26 Review Questions 5-27 Exercises 5-28 Chapter 6 Basic Dimensioning and Notes AutoCAD Certified User Examination Objectives Coverage 6-2 Introduction 6-3 The Bracket Design 6-3 Starting Up AutoCAD Layers Setup 6-5 The Bracket Design 6-6 Drawing Construction Lines 6-7 Using the OFFSET Command 6-7 Set Layer Object_Lines as the Current Layer 6-9 Creating Object Lines 6-9 Creating Hidden Lines 6-10 Creating Center Lines 6-11 Turn OFF the Construction Lines 6-11 Using the FILLET Command 6-12 Saving the Completed CAD Design 6-13 Accessing the Dimensioning Commands 6-14 The Dimension Toolbar 6-15 Using Dimension Style Manager 6-15 Dimensions Nomenclature and Basics 6-16 Using the Center Mark Command 6-19 Adding Linear Dimensions 6-20 Adding Angular Dimensions 6-21 Adding Radius and Diameter Dimensions 6-22 Using the MULTILINE TEXT Command 6-23 Adding Special Characters 6-24 Saving the Design 6-25 A Special Note on Layers Containing Dimensions 6-25 Review Questions 6-26 Exercises 6-27 Chapter 7 Templates and Plotting AutoCAD Certified User Examination Objectives Coverage 7-2 Introduction 7-3 The Geneva Cam Design 7-3

9 xviii AutoCAD 2016 Tutorial: 2D Fundamentals Chapter 9 Auxiliary Views and Editing with GRIPS AutoCAD Certified User Examination Objectives Coverage 9-2 Introduction 9-3 The V-Block Design 9-3 Starting Up AutoCAD Setting up the Principal Views 9-5 Setting up the Top View 9-8 Using the OFFSET Command 9-9 Creating Object Lines in the Front View 9-11 Setting the POLAR TRACKING Option 9-12 Setting up the Auxiliary View 9-15 Aligning the Auxiliary View to the Front View 9-16 Creating the V-cut in the Auxiliary View 9-16 Creating the V-cut in the Front-View and Top-View 9-19 Setting the Polar Tracking Option 9-21 Completing the Top-View 9-21 Edit the Plot Style Table 9-24 Start a new drawing for a Metric Template File 9-27 Layers Setup 9-28 Set up an A size Borders and Title Block in Layout Review Questions 9-34 Exercises 9-35 Chapter 10 Section Views AutoCAD Certified User Examination Objectives Coverage 10-2 Introduction 10-3 The Bearing Design 10-3 Starting Up AutoCAD The Bearing Design 10-5 Setting up the Principal Views 10-5 Creating Object Lines in the Front View 10-7 Editing the Circles 10-9 Setting up the Side View Adding Hidden Lines in the Side View Changing the Line Type Scale Property Stretching and Moving Objects with GRIPS Drawing a Cutting Plane Line Converting the Side View into a Section View Adding Section Lines Review Questions Exercises 10-25

### AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

### Principles and Practice

Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Principles and Practice:

Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

### An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

### Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

### Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

### SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### and Engineering Graphics

SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

### Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

### Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

### Autodesk Inventor 2016

Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn

### Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

### Principles and Practice

Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2017 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

### Parametric Modeling with

Parametric Modeling with UGS NX 6 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Parametric Modeling with

### AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

### Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

### Principles and Practice

Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation

### Required Materials For complete material(s) information, refer to

Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

### with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

### Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

### SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

### 06/17/02 Page 1 of 12

Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

### Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### Learning. Autodesk Inventor 2019 SDC. Modeling, Assembly and Analysis. Randy H. Shih. Better Textbooks. Lower Prices.

Learning Autodesk Inventor 2019 Modeling, Assembly and Analysis Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust

Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

### SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

### SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

### CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer

### SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

### Kankakee Community College

Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

### Chapter 2. Drawing Sketches for Solid Models. Learning Objectives

Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various

Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all

### A TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company

A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California

### ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

### Creating a 2D Drawing in Paper Space

C h a p t e r 16 Creating a 2D Drawing in Paper Space In this chapter, we will learn the following to World Class standards: 1. Converting 3D Solids to 2D Orthographic Views 2. Open the Solid Part Drawing

### Revit Structure 2014 Basics

Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

### 1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work

### SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

### SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2

COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation

### Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

### AutoCAD Essentials. Course Length: 3 days

AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD

### Introduction to CATIA V5

Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower

Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD

### Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Dimensioning the Bracket Problem

C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View

### ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor

AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000

### Revit Structure 2013 Basics

Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

### Computer Aided Drafting and Design Competence

POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced

### SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/

### Basic 2D drawing skills in AutoCAD 2017

Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.

### Fundamentals III PROJECT EXERCISE

4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE

### Assignment 12 CAD Mechanical Part 2

Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden

### Architecture 2012 Fundamentals

Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit

Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....

### Revit Structure 2012 Basics:

SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

### Computer Assisted Drafting (CAD) Level I & II

Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,

### Object Snap, Geometric Constructions and Multiview Drawings

Object Snap, Geometric Constructions and Multiview Drawings Sacramento City College EDT 310 EDT 310 - Chapter 6 Object Snap, Geometric Constructions and Multiview Drawings 1 Objectives Use OSNAP to create

### IN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing

IN-CLASS DEMONSTRATION Introduction to AutoCAD 2011 and 2-Dimensional Drawing GISC, UNIVERSITY OF CALIFORNIA BERKELEY LABORATORY GOALS In this module you will be introduced to the AutoCAD 2011 interface

### Autodesk AutoCAD Architecture 2015 Fundamentals

Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the

### Parametric Drawing Using Constraints

CHAPTER 10 Parametric Drawing Using Constraints PROJECT EXERCISE This project exercise provides point-by-point instructions for creating the objects shown in Figure P10 1. In this exercise, you will apply

### 7/9/2009. Offset Tool. Offset Tool. Offsetting - Erasing the Original Object. Chapter 8 Construction Tools and Multiview Drawings

Chapter 8 Construction Tools and Multiview Drawings Use the OFFSET tool to draw parallel lines and curves. Mark points on objects at equal lengths using the DIVIDE tool. Set designated increments on an

### Engineering Technology

Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,

### Getting Started. Chapter. Objectives

Chapter 1 Getting Started Autodesk Inventor has a context-sensitive user interface that provides you with the tools relevant to the tasks being performed. A comprehensive online help and tutorial system

### Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The

### Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA

Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA SolidWorks 2012-2015 An authorized CSWA preparation exam guide with additional information on the CSDA and CSWSA-FEA exams

### with Creo Parametric 4.0

Parametric Modeling with Creo Parametric 4.0 An Introduction to Creo Parametric 4.0 NEW Contains a new chapter on 3D Printing Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com

### COMPUTER AIDED DRAFTING LAB (333) SMESTER 4

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).

### Chapter 5 Orthographic Views in Multiview Drawings

AutoCAD 2015 Tutorial: 2D Fundamentals 5-1 Chapter 5 Orthographic Views in Multiview Drawings 56 I.5 Create 2D orthographic views using AutoCAD Using the CONSTRUCTION LINE command to draw 4 Using Running

### SYLLABUS. Apprenticeship Training Scheme

SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001

### AutoCAD 2015 Tutorial: 2D Fundamentals Lesson 10 Section Views /2 01/4. 47/fl 2/4

AutoCAD 2015 Tutorial: 2D Fundamentals 10-1 Lesson 10 Section Views... 025/2 ~imr 01/4 47/fl 2/4 Use CAD Methods to Create Section Views Use the Object Snap Shortcut Options 4 Change the Linetype Scale

### ME-441 COMPUTER SIMULATION AND ANALYSIS

ME-441 COMPUTER SIMULATION AND ANALYSIS IN MECHANICAL ENGINEERING Instructor: Dr. Herli Surjanhata Mechanical Engineering Department Office: 328 MEC Phone: (973) 596-3317 e-mail: surjanhata@adm.njit.edu

### Relative Coordinates

AutoCAD Essentials Most drawings are created using relative coordinates. This means that the next point is set from the last point drawn. The last point drawn is stored as temporary 0,0". AutoCAD uses

### Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.

Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA

### CATIA V5 Workbook Release V5-6R2013

CATIA V5 Workbook Release V5-6R2013 Richard Cozzens SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more

### Sketching & Auto CAD (Computer Aided Design) - Mechanical Design

Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits

### SKKK 1021 Engineering Drawing

SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use

### Autodesk Inventor Module 17 Angles

Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,

### Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models

GEN20552-L Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models J.C. Malitzke Digital JC CAD Learning Objectives Learn how to create drawing views of AutoCAD 3D models for