ENGINEERING GRAPHICS ESSENTIALS
|
|
- Colleen Long
- 5 years ago
- Views:
Transcription
1 ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive Video Instruction System SDC PUBLICATIONS Schroff Development Corporation Kirstie Plantenberg University of Detroit Mercy
2 Engineering Graphics Essentials with AutoCAD Instruction TABLE OF CONTENTS Chapter 1: Drawing In AutoCAD Chapter 2: Orthographic Projection Chapter 3: Creating Orthographic Projections in AutoCAD Chapter 4: Dimensioning Chapter 5: Dimensioning in AutoCAD Chapter 6: Sectioning Chapter 7: Creating Section Views in AutoCAD Chapter 8: Tolerancing Chapter 9: Tolerancing in AutoCAD Chapter 10: Threads and Fasteners Chapter 11: Drawing Threads in AutoCAD Chapter 12: Assembly Drawings Chapter 13: Creating Assembly Drawings in AutoCAD Chapter 14: Pictorial Drawings Chapter 15: Creating Isometric Pictorials in AutoCAD Appendix A: Limits and Fits Appendix B: Threads and Fastener Tables Appendix C: References ix
3 Chapter 1: Drawing in AutoCAD DRAWING IN AUTOCAD 1.1) INTRODUCTION ) Navigating through the AutoCAD Tutorials ) AUTOCAD S WORKSPACES AND USER INTERFACE ) THE DRAWING AREA ) ACCESSING AUTOCAD COMMANDS ) Application Button ) Pull-down Menus (AutoCAD Classic workspace) ) The Ribbon ) Toolbars (AutoCAD Classic workspace) ) Tool Palettes ) Command Prompt / Window ) Shortcut Menus ) Application Status Bar ) STANDARD AND QUICK ACCESS TOOLBARS ) Starting a new drawing ) CUSTOMIZE USER INTERFACE (CUI) ) USER INTERFACE AND STARTUP TUTORIAL ) Setting up the user interface ) Starting a new drawing ) Saving your drawing as a template ) Checking your drawing parameters ) COORDINATES ) Cartesian and Polar Coordinates ) Cartesian Coordinate System ) Polar Coordinates ) Relative Coordinates ) World Coordinate System (WCS) and User Coordinate System (UCS) ) The Coordinates Panel ) Coordinate Position ) WCS/UCS COORDINATE SYSTEMS TUTORIAL ) Coordinates ) Change to the User Coordinate System (UCS)
4 Chapter 1: Drawing in AutoCAD 1.9.3) Coordinate display and drawing ) Drawing using the UCS coordinate system ) DRAWING USING COORDINATES TUTORIAL ) Drawing a rectangle using Cartesian coordinates ) Drawing using relative polar coordinates ) Drawing using both Cartesian and polar coordinates ) PRINTING ) Page Setup ) Plot ) Printing to Scale ) PRINTING TUTORIAL ) Creating the drawing ) Printing ) Printing to scale ) Printing to PDF ) DRAW COMMANDS ) Line ) Construction Line ) Ray ) Polyline ) Polygon ) Rectangle ) Arc ) Circle ) Spline ) Ellipse ) Point ) TEXT ) Style ) Single-Line Text ) Multi-Lined Text ) MODIFY COMMANDS ) Selecting Objects ) Erase ) Copy ) Mirror ) Offset ) Array ) Move
5 Chapter 1: Drawing in AutoCAD ) Rotate ) Scale ) Stretch ) Lengthen ) Trim ) Extend ) Break ) Join ) Chamfer ) Fillet ) Blend Curves ) Explode ) OBJECT SNAP COMMANDS ) Endpoint ) Midpoint ) Intersection ) Apparent Intersection ) Extension ) Center ) Quadrant ) Tangent ) Perpendicular ) Parallel ) Nearest ) Snap From ) Insert ) Node ) Object Snaps Settings ) Object Snap Cycling and Aperture ) WAGON TUTORIAL ) Preparing to draw ) Drawing ) Using Modify commands ) SELECTING OBJECTS ) OBJECT SELECTION TUTORIAL ) Selecting objects using the pickbox ) Selecting objects using a window ) OBJECT SNAP TUTORIAL ) Drawing using Osnaps
6 Chapter 1: Drawing in AutoCAD ) Trimming unwanted lines ) POLAR TRACKING ) OBJECT SNAP TRACKING ) TRACKING TUTORIAL ) Polar tracking ) DYNAMIC INPUT ) DYNAMIC INPUT TUTORIAL ) Dynamic input settings ) GRIP BOXES ) GRIP BOX TUTORIAL ) Preparing to draw ) Fixing the drawing ) Modifying the drawings shape ) PARAMETRIC DRAWING ) Geometric Constraints ) Dimensional Constraints ) APPLYING PARAMETRIC CONSTRAINTS TUTORIAL ) Applying geometric constraints ) Applying Dimensional Constraints ) AUTOMATIC PARAMETRIC CONSTRAINTS TUTORIAL DRAWING IN AUTOCAD CROSSWORD PUZZLES DRAWING IN AUTOCAD PROBLEMS
7 Chapter 2: Orthographic Projection ORTHOGRAPHIC PROJECTION 2.1) INTRODUCTION TO ENGINEERING GRAPHICS ) ORTHOGRAPHIC PROJECTION INTRODUCTION ) The Six Principle Views ) THE GLASS BOX METHOD ) THE STANDARD VIEWS ) The Front View ) LINE TYPES USED IN AN ORTHOGRAPHIC PROJECTION ) RULES FOR LINE CREATION AND USE ) Hidden Lines ) Center Lines ) Phantom Lines ) Break Lines ) Line Type Precedence ) CREATING AN ORTHOGRAPHIC PROJECTION ) Projection Symbol ) AUXILIARY VIEWS ORTHOGRAPHIC PROJECTION CROSSWORD PUZZLE ORTHOGRAPHIC PROJECTION PROBLEMS
8 Chapter 3: Creating Orthographic Projections in AutoCAD CREATING ORTHOGRAPHIC PROJECTIONS IN AUTOCAD 3.1) INTRODUCTION ) LAYERS ) The Layers panel ) Layer Properties ) LINE TYPE SCALE ) PROPERTIES ) The Properties panel ) PRINTING USING PEN WIDTHS ) CREATING LAYERS TUTORIAL ) Setting drawing parameters ) Creating layers ) Drawing on different layers ) Line type scale ) TITLE BLOCKS ) Title Block Contents ) Date ) Sheet Layout ) BLOCKING ) TITLE BLOCK TUTORIAL ) Drawing the Border ) Framing in the title block ) Filling in the title block text ) Blocking the title block and border ) MODEL AND LAYOUT SPACE ) Model Space ) Layout Space ) ORTHOGRAPHIC PROJECTION TUTORIAL ) Draw the front view ) Drawing the right side view ) Drawing the top view
9 Chapter 3: Creating Orthographic Projections in AutoCAD ) Drawing centerlines ) Printing the layout ) Printing a metric drawing ) AUXILIARY VIEW TUTORIAL ) Drawing the orthographic projection ) Creating the auxiliary view ORTHOGRAPHIC PROJECTIONS IN AUTOCAD CROSSWORD PUZZLE ORTHOGRAPHIC PROJECTIONS IN AUTOCAD PROBLEMS
10 Chapter 4: Dimensioning DIMENSIONING 4.1) DETAILED DRAWINGS ) LEARNING TO DIMENSION ) DIMENSION APPEARANCE AND TECHNIQUES ) Lines Used in Dimensioning ) Types of Dimensions ) Lettering ) Dimensioning Symbols ) Dimension Spacing and Readability ) Dimension Placement ) DIMENSIONING AND LOCATING SIMPLE FEATURES ) DIMENSIONING AND LOCATING ADVANCED FEATURES ) Drawing Notes ) DIMENSION CHOICE ) Units and Decimal Places ) Locating Features Using Datums ) Dimension Accuracy ) Rounding off ) Cumulative Tolerances (Error Buildup) DIMENSIONING CROSSWORD PUZZLE DIMENSIONING PROBLEMS
11 Chapter 5: Dimensioning in AutoCAD DIMENSIONING IN AUTOCAD 5.1) INTRODUCTION ) DIMENSION COMMANDS ) Dimensions panel ) The Leaders Panel ) DIMENSION STYLES ) Dimension Style Manager ) Multileader Style Manager ) DIMENSION VARIABLES ) Dimension Scale ) Dimension and Extension Lines ) Dimension Text ) Diameter and Radial Dimensions ) Angular Dimensions ) Alternative Units ) Toleranced Dimensions ) Miscellaneous ) THE DIM PROMPT ) Creating Dimensions from the Dim Prompt ) ASSOCIATIVE DIMENSIONS ) ANNOTATIVE OBJECTS ) Annotative Object Scale ) DIMENSIONING TUTORIAL ) Drawing the object ) Drawing linear dimensions ) Drawing diameter and radius dimensions ) Drawing angular dimensions ) Drawing leaders ) Creating a new dimension style ) Annotative objects ) Dimension scale and associativity ) EDITING DIMENSION TEXT TUTORIAL
12 Chapter 5: Dimensioning in AutoCAD DIMENSIONING IN AUTOCAD CROSSWORD PUZZLE DIMENSIONING IN AUTOCAD PROBLEMS
13 Chapter 6: Sectioning SECTIONING 6.1) SECTIONAL VIEWS ) Creating a Section View ) Lines used in Sectional Views ) Rules of Sectioning ) BASIC SECTIONS ) Full Section ) Half Section ) ADVANCED SECTIONS ) Aligned Section ) Rib and Web Sections ) Broken Section ) Removed Section ) Revolved Section ) Non-Sectioned Parts ) Thin Sections SECTIONING CROSSWORD PUZZLE SECTIONING PROBLEMS
14 Chapter 7: Creating Section Views in AutoCAD CREATING SECTION VIEWS IN AUTOCAD 7.1) INTRODUCTION ) CUTTING PLANE LINES ) HATCHES ) CREATING HATCHES TUTORIAL ) Creating hatches ) Changing hatch properties ) HALF SECTION TUTORIAL ) Inserting the cutting plane line ) Creating the half section view SECTION VIEWS IN AUTOCAD CROSSWORD PUZZLE SECTION VIEWS IN AUTOCAD PROBLEMS
15 Chapter 8: Tolerancing TOLERANCING 8.1) TOLERANCING AND INTERCHANGEABILITY ) TOLERANCING STANDARDS ) TOLERANCE TYPES ) SHAFT-HOLE ASSEMBLY ) INCH TOLERANCES ) Types of Fits ) ANSI Standard Limits and Fits (English) ) METRIC TOLERANCES ) ANSI Standard Limits and Fits (Metric) ) Tolerance Designation ) Basic Hole and Basic Shaft Systems ) SELECTING TOLERANCES ) TOLERANCE ACCUMULATION ) FORMATTING TOLERANCES ) Metric Tolerances ) Inch Tolerances TOLERANCING CROSSWORD PUZZLE (Inch) TOLERANCING CROSSWORD PUZZLE (Metric) TOLERANCING PROBLEMS
16 Chapter 9: Tolerancing in AutoCAD TOLERANCING IN AUTOCAD 9.1) INTRODUCTION ) TOLERANCE PARAMETERS ) TOLERANCING TUTORIAL ) Drawing the object ) Tolerancing... 6 TOLERANCING IN AUTOCAD CROSSWORD PUZZLE... 9 TOLERANCING IN AUTOCAD PROBLEMS
17 Chapter 10: Threads and Fasteners THREADS AND FASTENERS CHAPTER OULINE 10.1) FASTENERS ) SCREW THREAD DEFINITIONS ) TYPES OF THREAD ) MANUFACTURING SCREW THREADS ) DRAWING SCREW THREADS ) Detailed Representation ) Schematic Representation ) Simplified Representation ) UNIFIED THREADS ) Unified Thread Note ) Unified Thread Tables ) METRIC THREADS ) Metric thread note ) Metric Thread Tables ) DRAWING BOLTS ) BOLT AND SCREW CLEARANCES THREAD AND FASTENER CROSSWORD PUZZLE THREAD AND FASTENER PROBLEMS
18 Chapter 11: Drawing Threads in AutoCAD DRAWING THREADS IN AUTOCAD 11.1) INTRODUCTION ) EXTERNAL THREADS TUTORIAL ) Drawing external Unified National threads ) INTERNAL THREADS TUTORIAL ) Drawing Unified National internal threads ) HEX NUTS AND BOLTS TUTORIAL ) Drawing a hex head bolt ) Drawing a hex head nut DRAWING THREADS IN AUTOCAD PROBLEMS
19 Chapter 12: Assembly Drawings ASSEMBLY DRAWINGS CHAPTER OULINE 12.1) DEFINITIONS ) Drawing Order ) VIEWS USED IN ASSEMBLY DRAWINGS ) Selecting Views ) Sectional Views ) THINGS TO INCLUDE/NOT INCLUDE ) Hidden Lines ) Dimensions ) Identification ) Parts List/ Bill of Material ) STANDARD PARTS ) General Fastener Specifications... 9 ASSEMBLY CROSSWORD PUZZLE ASSEMBLY PROBLEMS
20 Chapter 13: Creating Assembly Drawings in AutoCAD CREATING ASSEMBLY DRAWINGS IN AUTOCAD 13.1) INTRODUCTION ) ASSEMBLY TUTORIAL ) Creating the assembly drawing ) Balloon the assembly ) Create a parts list ) Title block information ASSEMBLY DRAWINGS IN AUTOCAD PROBLEMS
21 Chapter 14: Pictorials PICTORIALS 14.1) PICTORIALS INTRODUCTION ) ISOMETRIC PICTORIAL AXES ) DRAWING LINEAR FEATURES ) DRAWING CIRCLES AND RADII ) DRAWING CYLINDERS ) OBLIQUE PICTORIAL OVERVIEW PICTORIAL CROSSWORD PUZZLE PICTORIAL PROBLEMS
22 Chapter 15: Creating Isometric Pictorials in AutoCAD CREATING ISOMETRIC PICTORIALS IN AUTOCAD 15.1) ISOMETRIC SNAP ) ISOCIRCLES ) ISOMETRIC PICTORIAL TUTORIAL ) Setting up to draw an isometric pictorial ) Drawing the isometric pictorial ) ISOCIRCLE TUTORIAL ) Setting up to draw an isometric pictorial ) Drawing the isometric pictorial
23 Appendix A: Limits and Fits APPENDIX A: LIMITS AND FITS APPENDIX OUTLINE A.1) LIMITS AND FITS (INCH)... 3 A.1.1) Running or Sliding Clearance Fits... 3 A.1.2) Locational Clearance Fits... 5 A.1.3) Locational Transition Fits... 7 A.1.4) Locational Interference Fits... 8 A.1.5) Force and Shrink Fits... 9 A.2) METRIC LIMITS AND FITS A.2.1) Hole Basis Clearance Fits A.2.2) Hole Basis Transition and Interference Fits A.2.3) Shaft Basis Clearance Fits A.2.3) Shaft Basis Clearance Fits A.2.4) Shaft Basis Transition and Interference Fits A - 1
24 Appendix B: Threads and Fasteners APPENDIX B: THREADS AND FASTENERS APPENDIX OUTLINE B.1) UNIFIED NATIONAL THREAD FORM... 3 B.2) METRIC THREAD FORM... 4 B.3) FASTENERS (INCH SERIES)... 5 B.3.1) Dimensions of Hex Bolts and Heavy Hex Bolts... 5 B.3.2) Dimensions of Hex Nuts and Hex Jam Nuts... 6 B.3.3) Dimensions of Hexagon and Spline Socket Head Cap Screws... 7 B.3.4) Drill and Counterbore Sizes for Socket Head Cap Screws... 8 B.3.5) Dimensions of Hexagon and Spline Socket Flat Countersunk Head Cap Screws... 9 B.3.6) Dimensions of Slotted Flat Countersunk Head Cap Screws B.3.7) Dimensions of Slotted Round Head Cap Screws B.3.8) Dimensions of Preferred Sizes of Type A Plain Washers B.3.9) Dimensions of Regular Helical Spring-Lock Washers B.4) METRIC FASTENERS B.4.1) Dimensions of Hex Bolts B.4.2) Dimensions of Hex Nuts, Style B.4.3) Dimensions of Metric Socket Head Cap Screws B.4.4) Drill and Counterbore Sizes for Socket Head Cap Screws B.4.5) Dimensions of Metric Countersunk Socket Head Cap Screws B.4.6) Drill and Countersink Sizes for Flat Countersunk Head Cap Screws B.5) BOLT AND SCREW CLEARANCE HOLES B.5.1) Inch Clearance Holes B.5.2) Metric Clearance Holes B - 1
TABLE OF CONTENTS. Chapter 1: Drawing In AutoCAD
TABLE OF CONTENTS Chapter 1: Drawing In AutoCAD 1.1) Introduction 1-1 1.2) AutoCAD s User Interface 1-4 1.3) The Drawing Area 1-6 1.4) Accessing AutoCAD Commands 1-8 1.5) Standard Toolbar 1-19 1.6) Customize
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationAutoCAD 2014 Tutorial - First Level: 2D Fundamentals
AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationFirst Level 2D Fundamentals
AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationAutoCAD LT 2010 Tutorial
AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationADA Curriculum for Pre-Engineering Students Correlation Guide
ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain
More informationIntroduction to CATIA V5
Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationENGINEERING GRAPHICS ESSENTIALS. (A Text and Lecture Aid) Second Edition. Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS
ENGINEERING GRAPHICS ESSENTIALS (A Text and Lecture Aid) Second Edition Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationDrawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices
More informationSolidWorks 2013 Part I - Basic Tools
SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationTeach Yourself UG NX Step-by-Step
Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...
More informationBeginner s Guide to SolidWorks Level I
Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationParametric Modeling with Creo Parametric 2.0
Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationRequired Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.
Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will
More informationChapter 2. Drawing Sketches for Solid Models. Learning Objectives
Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationDharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester
Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationSolidWorks 2014 Part I - Basic Tools
SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationDrawing and Detailing
Drawing and Detailing with SolidWorks 2007 By David C. Planchard and Marie P. Planchard Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices SDC PUBLICATIONS Schroff Development
More informationSYLLABUS. Apprenticeship Training Scheme
SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
More informationBeginner s Guide to SolidWorks Level I
Beginner s Guide to SolidWorks 2014 - Level I Parts, Assemblies, Drawings, PhotoView 360 and Simulation Xpress Videos Now includes SolidWorks training videos Alejandro Reyes MSME, CSWP, CSWI Multimedia
More information1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad
1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work
More informationIsometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
More informationParametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC
Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of
More informationCATIA Instructor-led Live Online Training Program
Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationEngineering & Computer Graphics Workbook Using SolidWorks 2014
Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationIntroduction to AutoCAD 2010
Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 7 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Call the
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationEngineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationChapter 2: Dimensioning Basic Topics Advanced Topics Exercises
Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Dimensioning: Basic Topics Summary 2-1) Detailed Drawings 2-2) Learning to Dimension 2-3) Dimension Appearance and Techniques. 2-4) Dimensioning
More informationAutoCAD Essentials. Course Length: 3 days
AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD
More information2009 Academic Challenge
2009 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin Devine,
More informationCreo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.
Creo Parametric 1.0 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical
More informationSOLIDWORKS 2017 Basic Tools
SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationCreo Parametric 4.0 Basic Design
Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationTools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih
Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationCreo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling
Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...
More informationA TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company
A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California
More informationCopyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material
Engineering Graphics FREEHAND SKETCHING Introduction to Freehand Sketching Sketching is a very important technique for technical communication. Sketches can transfer ideas, instructions and information
More informationIsometric Drawing Chapter 26
Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationGeometric dimensioning & tolerancing (Part 1) KCEC 1101
Geometric dimensioning & tolerancing (Part 1) KCEC 1101 Introduction Before an object can be built, complete information about both the size and shape of the object must be available. The exact shape of
More informationTable of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements
Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9
More informationEngineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
More informationArchitecture 2012 Fundamentals
Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit
More informationSpokane Public Schools Course: Drafting and Design Technology
Spokane Public Schools Drafting and Design Technology Course: Drafting and Design Technology Total Framework Hours up to: 180 hours CIP Code: 140102 Exploratory Preparatory Date Last Modified: 4/2/2015
More informationSDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology
AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric
More informationAutodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationA Practical Guide to AutoCAD 2019
A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of
More informationEngineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
More informationUnit4 31. UnitS 39. Unit 6 47
Preface..................... xi About the Author......... xiii Acknowledgments... xiv Unit 1 1 Bases for Interpreting Drawings........ I Visible Lines............. 3 Lettering on Drawings... 3 Sketching...
More informationBasic 2D drawing skills in AutoCAD 2017
Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.
More information2016 Academic Challenge
2016 Academic Challenge ENGINEERING GRAPHICS TEST REGIONAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Mark
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationAutoCAD Tutor 2011 Support Docs
AutoCAD Tutor 2011 Support Docs CHAPTER 1 CUSTOMIZING THE QUICK ACCESS TOOLBAR One of the advantages of the Quick Access Toolbar is the ability to display the AutoCAD commands that you frequently use.
More informationCopyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material
Engineering Graphics ORTHOGRAPHIC PROJECTION People who work with drawings develop the ability to look at lines on paper or on a computer screen and "see" the shapes of the objects the lines represent.
More informationwith MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation
with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial
More informationSOLIDWORKS 2018 Basic Tools
SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationBeginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS
Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More informationContinuous thick. Continuous thin. Continuous thin straight with zigzags. Dashed thin line. Chain thin. Chain thin double dash
Types of line used Continuous thick Used for visible outlines and edges. Continuous thin Used for projection, dimensioning, leader lines, hatching and short centre lines. Continuous thin straight with
More informationMultiviews and Auxiliary Views
Multiviews and Auxiliary Views Multiviews and Auxiliary Views Objectives Explain orthographic and multiview projection. Identifying the six principal views. Apply standard line practices to multiviews
More informationME Week 2 Project 2 Flange Manifold Part
1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationAutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation
AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction
More information2. To develop basic skills in the use of drawing instruments and drafting techniques.
IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:
More informationIsometric Circles and Arcs
AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More information11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings
CHAPTER 7 1) Axonometric Drawings 1) Introduction Isometric & Oblique Projection Axonometric projection is a parallel projection technique used to create a pictorial drawing of an object by rotating the
More informationCOURSE SYLLABUS. Course Prefix Number:
COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision
More information