Assemble the head. Wedding Bear Bride : Assembly Instructions A1, B1. Use pattern: Page2/Page3.

Size: px

Start display at page:

Download "Assemble the head. Wedding Bear Bride : Assembly Instructions A1, B1. Use pattern: Page2/Page3."

Posy Matthews
6 years ago
Views:

A Assemble the head Use pattern: 2/3. Cut out by cutting along the lines. Cut along the line marked.

glue tab. Parts No. Head Parts name Scissors line Triangular glue tab Make a mountain fold on.

Tools Notation Key The parts will be easier to assemble if curled.

(arm), and G (veil and bouquet). Follow the instructions for each block to assemble your teddy bear.

1 A Assemble the head Use pattern: 2/3. Cut out by cutting along the lines. Cut along the line marked. Cut a slot right Glue down the glue in to the apex of Glue spot tabs one at a time the triangular in turn. glue tab. Parts No. Head Parts name Scissors line Triangular glue tab Make a mountain fold on. Trace along the mountain fold line with a pencil, scoring it to make it easier to fold. Tools Notation Key The parts will be easier to assemble if curled. Using the photo as a guide, apply pressure with the palm of your hand, gradually curling the paper in the direction of the arrow. Scissors Paste, or woodwork glue Stencil pen, or bodkin Ruler, Scissors line Mountain fold Valley fold Glue spot Glue reverse side Parts No. The Assembly instructions are divided into seven blocks: A (head), B (body), C (legs), D (dress), E (ribbon), F (arm), and G (veil and bouquet). Follow the instructions for each block to assemble your teddy bear. Add a slight curl to when attaching it. Attach the triangular glue tabs so that the front side becomes convex. Using the photo as a guide, attach in the direction of the arrow. marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance. <Caution> Keep scissors and glue away from small children. Be careful not to cut your fingers when using scissors.

2 Cut out and A3, curl them and glue the triangular glue tabs, attaching each to. Assemble A8 and attach to the head.assemble. Head A8 A8 A3 A3 Glue together the remaining glue spots. Assemble and attach it to A5. *Note: The completed will be attached in the last step. B Assemble the body Use pattern: 4/5. Assemble. A5 Assemble A6 and A7 in the same way and attach the ears to the head. A6 A7 A6 A7 A5 A5 Assemble. A3

3 Attach and together. Attach C1 through together. C1 C2 C2 C3 C4 C4 Assemble and attach it to to complete the body. C5 C3 C5 Do not put glue on the protruding parts. *Note: The completed head will be fitted in a later step. C Assemble the legs Use pattern: 6/7. Assemble parts C2 through. Assemble parts C8 through C14 in the same way. C12 C13 C14 C2 C8 C9 C11 C10 C3 Fit both legs to the completed body. Leave the protruding part out. C4 C5 C13 Return to its original position.

4 D Assemble the dress Use pattern: 8/9/10/11. Attach and D2.Assemble and D4 in the same way, then attach and. Assemble and attach it to D7. D7 D2 Attach D7 and to the skirt. D7 D7 D2 Attach and to the skirt. Assemble and 0 and stick them together. Match up the shapes of the glue spots and then stick them together. D4 Check front and back, then stick together. 0 0 Attach,0 to the skirt,to complete the dress. Check front and back, then stick together. 0 0 D4 D2

5 E Assemble the ribbon Use pattern: 12. Assemble. Attach,, E4, E5 to. E5 E4 E5 Attach the ribbon to the dress. 0 Assemble and attach it to. Attach E4 and E5 in the same way. Fit the dress over the body, to complete the ribbon. E4 E5

6 F Assemble the arm Use pattern: 13. Assemble parts F1 through. Assemble parts F7 through F12 in the same way. F11 F10 F12 F1 F2 F9 F8 F7 Fit both arms to the completed body. Leave the protruding part out. F4 F3 Return to its original position. F11 Attach F1 through together. F2 Fit the head to the body and attach. F1 F3 F2 F4 Do not put glue on the protruding parts. F3 F4 Return to its original position.

7 G Assemble the veil and bouquet Use pattern: 14/15. Assemble, and G3, G4 and attach G5. Attach,2,3 and Match up the shapes of the glue spots and then stick them together. Assemble G3 and G4 in the same way. G3 Assemble 5 and attach it to. 5 5 Match up the lines. G5 G4 G5 Assemble G6 and attach to the ribbon. G6 G6 Assemble parts 6 to 7 in the same way as the flowers for the veil, then stick them onto G Attach G7,G8,G9 and 0 and attach it to the ribbon. G8 G8 G7 Assemble 8 and stick it on behind the leaf of the bouquet. Attach the bouquet to the veil and you re finished! G7 G9 G8 G9 8 Glue here. Open out the petals and then stick them together. 0 0 G9 0

Mini Roses : Assembly Instructions

Mini Roses : Assembly Instructions is a registered trademark of Inc. Inc. Cut line Mountain fold Valley fold Slot http://www.canon.com/c-park/en/ Making the Rose Petals Glue the back of parts 5 to 14 and fold it outwards. Cut out the petals