Grand piano : Assembly Instructions. Grand piano. [Assembly Instructions] : Eleven letter sheets. Scissors line. Cut in line.
|
|
- Steven Gordon
- 5 years ago
- Views:
Transcription
1 Grand piano : Assembly Instructions PAGE 01 Lockbar Front lid Music desk Back lid Lock rail Bridge Strings Fallboard Frame Lid prop Heel Backbottom Leg Pedals Caster Grand piano [Assembly Instructions] : Eleven letter sheets When assembling the parts, be sure to carefully read the "Assembly Instructions" along with the parts sheet. This model was designed for Papercraft and may differ from the original in some respects. Black and yellow paint has been added to the finished piece in the photo. Assembly Instructions Sound board Leg Leg plate Console Cut in line Mountain fold Valley fold Cut out Scissors, tweezers, glue (We recommend craft glue.) Glue stick (used to attach wide surfaces together.) Thread (size 20) (Used to string the piano.) Instant adhesive (Recommended to attach the thread.) Be careful not to cut your fingers when using scissors. Fold the folding lines before gluing. Backbottom Scissors line What you need Keep glue away from small children. Braces Notation Key 1: Carefully cut out the parts. 2: Make mountain folds and valley folds along the dotted lines, as indicated by the directions. 3: Assemble the parts in the order shown by the numbers on the glue tabs. (Read the assembly instruction for more information.) 4: Attach the parts in order. (Read the assembly instruction for more information.) 5:Your Paper craft model is finished. Caution Pedal plate Glue spot Handy Hint You can give the piano a more "genuine" appearance if you paint the surface after cutting out the black and yellow parts.
2 PAGE 02 A Making the grand piano's body. Interlock a and a together. Interlock b and b together. As shown here, attach the back sides together. Cut out. Cut the part to the correct size, and attach.
3 PAGE 03 Attach the reinforcing beams as shown Attach the respective parts as
4 PAGE 04 Attach the reinforcing beams as shown After gluing 28 and 29 together, attach the reinforcing beams as shown. B Making the fallboard. Attach the parts as shown Attach 31 and 32, and make the reinforcing beams. Curve. Curve. Roll up and attach. Curve part 41 as
5 PAGE 05 A figure of completion of the fallboard. Attach the reinforcing beam 46 to back side of 45 as Fallboard(back) Attach. Fallboard(face) C Making the backbottom and keys. Cut out the black keys one at a time and attach them. * This step can be omitted. Attach the reinforcing beams as Attach the parts as shown
6 PAGE 06 D Put the parts together to assemble the body. Assemble the parts as Assemble the parts as Slot the fallboard in without applying glue. Assemble the parts as E Making the console and legs. Assemble the parts as Attach 62 to the parts made in 36. Attach the reinforcing beams. Attach the reinforcing beams to the parts made in 37. Glue parts. * Make three of these. * Make three of these. * Make three of these.
7 PAGE 07 Attach the reinforcing beams 73 to back side of 72 as shown here, and assemble the parts. View from above. View from underneath. Attach the parts 82, 83. Attach the parts 84, 85. F Making the pedals. Attach the reinforcing beams 75, 76 to back side of 74 as shown here, and assemble the parts. Make three of these. Make two of these. Attach the back sides together. Attach the parts.
Accordion : Assembly Instructions
An accordion is a musical instrument which is played by compressing or expanding a bellows in a horizontal direction. When the central bellows are compressed and expanded, air flows to the instrument's
More informationTrumpet : Assembly Instructions
A trumpet is a brass instrument which is played by blowing air into the mouthpiece and causing vibrations with the lips, while operating piston or rotary valves. A trumpet's shape and the length of its
More informationStatue of Liberty, U.S.A.: Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc. Hiroshi Chiba / PAPERART-C
http://www.canon.com/c-park/en/ Before starting assembly:writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More informationShake them and make music! "Shaky-shaky" maracas! : Assembly Instructions
*These maracas come in a set of two. Round maraca Thin maraca Maracas are percussion instruments that belong to the group of instruments called "idiophones." They consist of a hollow sphere with a handle
More informationSydney Opera House (Australia): Assembly Instructions
http://www.canon.com/c-park/en/ Before starting assembly:writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More informationElastic-powered Bus : Assembly Instructions
Elastic-powered Bus : Assembly Instructions Assembly Instructions 1. Carefully cut out the parts. 2. Fold along the dotted lines, making mountain or valley folds as indicated. 3. Attach the glue spots
More information(Moving) Clowns out of a cannon : Assembly Instructions
http://www.canon.com/c-park/ Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More information(Moving) Clown and sea lion acrobatics : Assembly Instructions
http://www.canon.com/c-park/en/ Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which
More informationWright Flyer. Glue. Parts list (Assembly Instructions) : Eleven A4 sheets (No.1 ~ No.11) No. of Parts: 127. Assembly Instructions
Wright Flyer The Wright Flyer is the aircraft built by the Wright brothers, Wilbur Wright and his younger brother Orville. The main wings were of biplane configuration, and it featured a gasoline engine
More informationJAGUAR XKR : Assembly Instructions
View of compleate model(side view) View of compleate model(front view) JAGUAR XKR The Jaguar XKR brings the Jaguar Sports Car tradition that began with the XK 120, into the modern era. The sleek curves
More informationMini Roses : Assembly Instructions
is a registered trademark of Inc. Inc. Cut line Mountain fold Valley fold Slot http://www.canon.com/c-park/en/ Making the Rose Petals Glue the back of parts 5 to 14 and fold it outwards. Cut out the petals
More informationSnowy owl (Female) : Assembly Instructions
Snowy owl (Bubo scandiacus) The snowy owl is covered in snow-white feathers. This large species of owl is mainly found in Arctic tundra areas. The snowy owl can rotate its head up to 270 degrees giving
More informationAssemble the head. Wedding Bear Bride : Assembly Instructions A1, B1. Use pattern: Page2/Page3.
A Assemble the head Use pattern: 2/3. Cut out by cutting along the lines. Cut along the line marked. Cut a slot right Glue down the glue in to the apex of Glue spot tabs one at a time the triangular in
More informationJAGUAR XKR : Assembly Instructions
JAGUAR XKR : Assembly Instructions View of compleate model(side view) View of compleate model(front view) JAGUAR XKR The Jaguar XKR brings the Jaguar Sports Car tradition that began with the XK 120, into
More informationCrocodile : Assembly Instructions
Crocodile (Nile crocodile) Reptilia Crocodilia Crocodylidae Crocodylus Length: Up to 6 m Weight: Up to 1 t Habitat: Rivers, lakes, ponds and marshes in Africa *This photo shows a model which uses the optional
More informationArticulated Ladder Truck
Special Vehicle Series : 05 Articulated Ladder Truck View of completed model * This model was designed for Papercraft and may differ from the original in some respects. Tools tip Scissors Ruler, set square
More informationNote. One - point Advice. To begin. Basic working method and markings. Fold along these lines. The printed surface should be
Note To begin Basic working method and markings Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin
More information(Moving) Cute acrobat puppies : Assembly Instructions
Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section is which even after cutting
More informationThe glue spot (colored dot) shows where to apply the glue. Glue parts with the same number together.
http://www.canon.com/c-park/en/ West face South face View of completed model Japan Himeji Castle Situated in Himeji City in Hyogo Prefecture, Himeji Castle is also known as the White Heron Castle because
More informationJAGUAR E-TYPE : Assembly Instructions 1 Canon is a registered trademark of Canon Inc. M.Kajiwara
JAGUAR E-TYPE : Assembly Instructions 1 Canon is a registered trademark of Canon Inc. M.Kajiwara View of complete model (Side view) view of the engine view of the cockpit "Jaguar E-type" is one of the
More informationThoroughbred: Assembly Instructions
Thoroughbred: Assembly Instructions Parts list (pattern): Ten A4 sheets Assembly Instructions: Three A4 sheets *Read the Assembly Instructions carefully in page order referring to the page numbers on the
More informationTaj Mahal, India: Assembly Instructions
Taj Mahal, India: Assembly Instructions %&'(')*)+,)&)-./+,0.-.1)0-&1.2&-3)(4)%&'(')5'67)8)%&'(')5'67)8)9):)9)%(7;)?@@AAA76&'('76(2@6B>&-3@.'@ Before starting assembly:writing the number of each
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationSubaru Telescope: Assembly Instructions
http://www.canon.com/c-park/en/ Rules for assembling the Subaru Telescope Paper Craft Number each part on its backside after cutting out to avoid confusion. Indicates where sections should be glued together.
More informationMURATA BOY Paper Craft
MURATA BOY Paper Craft Assembly Direction Download the paper craft data and print it out to assemble MURATA BOY. Complete the paper craft using all of the parts printed. It will make a nice family project.
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this paper craft model of the. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model. Assembly
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this paper craft model of the Plum blossoms and a Japanese bush warbler. By matching the names and numbered parts in the instructions, you and your family
More informationAssembly instructions: Ten A4-sized sheets. Paper craft: Three A4-sized sheets with 22 parts in all
Thank you for downloading this paper craft model of the Japanese Crane. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and
More informationAssembly instructions: Six A4-sized sheets. Paper craft: Three A4-sized sheets with 14 parts in all
Thank you for downloading this paper craft model of the African elephant. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationPaper Toys Town Accessories
BIBLE Paper Toys Town Accessories TOOLS NEEDED glue General Assembly Instructions Sharp scissors. Paper-ting knife (recommended: X-Acto knife with a #11 blade). Sturdy tweezers with smooth edges. (Tweezers
More informationSee pages 5-6 for template and instructions. Gear up with this never land pirate hat and let the swashbuckling begin!
Treasure crafts Ahoy ye pirates! Here be some super fun pirate crafts for you and your crew! Make all these piratey crafts by printing the pages of this Treasure Crafts kit. You will need: Scissors» Tape»
More informationWelcome to our Wee Work section that will provide you and your child. with a learning activity that will engage their senses and emerging skills.
Welcome to our Wee Work section that will provide you and your child with a learning activity that will engage their senses and emerging skills. Scroll down the page to find the activity that meets your
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Four A4-sized sheets with 21 parts in all
Thank you for downloading this paper craft model of the Japanese Macaque. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationBIBLE. Paper Toys. Book 2 The Nativity House. The Nativity Story
BIBLE Paper Toys The Nativity Story Book 2 The Nativity House Bible Paper Toys The Nativity Story You can read the story of the first Christmas in Matthew 1:18 25, 2:1 11 and Luke 1:26 38, 2:1 20. Model
More informationHubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at:
Hubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at: Materials: Construction tips: The patterns and instructions, which can be downloaded at. The pattern
More informationSci-fi MiniWorld 10 + EASY TO BUILD PAPER CRAFT ROBOTS. Cut, assemble and play
Sci-fi MiniWorld 10 + EASY TO BUILD PAPER CRAFT ROBOTS Cut, assemble and play TOOLS NEEDED glue General Assembly Instructions Sharp scissors. Paper-cutting knife (recommended: X-Acto knife with a #11 blade).
More informationTheSorceres. (FantasyVersion)
TheSorceres (FantasyVersion) The Sorceress! (Fantasy Version) Papercraft design by Kostas Ntanos Based on the Sorceress from The Cardboard Kingdom What you will need o An adult to help you with cutting
More informationAssembly instructions: Six A4-sized sheets. Paper craft: Three A4-sized sheets with 9 parts in all
Thank you for downloading this paper craft model of the Coelacanth. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and precious
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Two A4-sized sheets with 9 parts in all
Thank you for downloading this paper craft model of the Yellow-eyed penguin. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 9 parts in all
Thank you for downloading this paper craft model of the Gorilla. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and beautiful
More information3D Car. colour, decorate and then cut out their car. Fold the tabs around the a large A3 poster for group decorating.
BLMAbout All NameTransport These Blackline Masters can be completed in a variety of ways. The activities are designed to be stimulating, crafty and fun! They range from simple colouring to more complex
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this special New Year s paper craft model. By following these instructions while referring to the names and numbers shown on the parts sheet, you can complete
More informationPaper Toys The Easter Story Assembly Instructions
BIBLE Paper Toys The Easter Story Assembly Instructions TOOLS NEEDED Assembly Instructions Sharp scissors. Paper-cutting knife (recommended: X-Acto knife with a #11 blade). Sturdy tweezers with smooth
More informationInstruction Manual: Ariane V (Hermes Space Shuttle)
56. A science pod will be folded to create a rectangular prizm to be glued at the rear. 59. These two parts make up the main fuselage of the Hermes space shuttle. 57. As you can see, the science pod will
More informationKung Fu Panda 3-D Paper Character Po ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult GETTING STARTED
Kung Fu Panda 3-D Paper Character Po ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult GETTING STARTED Materials: Metal-edged ruler Butter knife Scissors or X-ACTO knife
More informationMANEKI NEKO (Lucky cat)
Paper craft Mini-book / Assembly Instructions MANEKI NEKO (Lucky cat) Beckoning for money Maneki-neko, or beckoning cat, is a widely recognizable figure beloved in Japan as a lucky cat that beckons for
More informationAssembly Instructions
Assembly Instructions Thank you for downloading the "YZF-R"paper craft model. By simply following this manual while referring to the names and numbers shown on the parts sheets, you can assemble an authentic-looking
More informationOpen Pit Garage/ PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better!
Step By Step Instructions For Open Pit Garage/ PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better! for Kit # BK XXXX Finished Open Pit Garage shown below Read the Step By Step Instructions
More informationTakeout Box. Difficulty Easy. Materials
Jack-o-lantern What could be more fun than Halloween treats served in a jack-o-lantern tin or takeout box? This easy to create design uses glittery yellow and burnt orange cardstock to simulate the glowing
More informationTHE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 1.
THE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 1. THE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a toothpick, a ruler, a needle and
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 16 parts in all
Thank you for downloading this paper craft model of the Steller s Sea Eagle. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationShopping List:- How to make a... Sue Wilson Magical Butterfly Card. Sue Wilson Spanish Collection Granada Die & Galicia Die,
How to make a... Sue Wilson Magical Butterfly Card Shopping List:- Sue Wilson Spanish Collection Granada Die & Galicia Die, Sue Wilson Finishing Touches Filigree 3D Itty Bitty Bows & Magical Butterflies
More informationCF9030 ASSEMBLY PROCEDURES
VERMONT PROCEDURES Step 1: Unpack carton. Tools Required: Knife or scissors; hammer; Philips or Robertson screwdriver Castings Box #5 Box #4 Box #1 Box #3 Box #2 Use the knife or scissors to cut the strapping
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS For Wallbed models: Do-It-Yourself BOOKLET #C90 WARNING! ALL MURPY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationHONDA RIDGELINE (KIT #601) Installation Instructions (to be used in addition to owners manual)
HONDA RIDGELINE (KIT #601) Installation Instructions (to be used in addition to owners manual) IMPORTANT NOTE: Read before beginning installation. These instructions replace all of Step 1 of the instructions
More informationPlay Scale Doll Accessories Products hfd008a, hfd008b, hfd008c, and hfd008d Designed by Ann Lenore Vanture
Play Scale Doll Accessories Products hfd008a, hfd008b, hfd008c, and hfd008d Designed by Ann Lenore Vanture For the best results please view the on-line Tool Box found on the same menu page as this tutorial.
More informationValentine Boy. Pattern and Instructions. By Cutest Voodoo
Valentine Boy Pattern and Instructions By Cutest Voodoo Before we start... This pa ern is copyrighted by Cutest Voodoo. This is an original design and is made for personal use only. Mass produc on of this
More informationHubble Space Telescope Expert Model Exterior Directions Downloads, patterns, and other information at:
Hubble Space Telescope Expert Model Exterior Directions Downloads, patterns, and other information at: Materials: The patterns and instructions, which can be downloaded at. The pattern pieces should be
More informationLANTERNS. Good & Evil. Give your room the warm enchanted glow of delicate paper lanterns. Tabletop Lanterns. Hanging Lanterns. Have an adult help you.
Good & Evil LANTERNS Give your room the warm enchanted glow of delicate paper lanterns. USE LED LIGHTS ONLY. DO NOT USE REAL CANDLES. Tabletop Lanterns Have an adult help you. Step 1: Print out (2) of
More informationARTS AND CRAFTS Take us to the World Centres. Cow Refrigerator Magnet. Recycled Pop Can Cow
Cow Refrigerator Magnet For instructions, please visit http://www.aokcorral.com/projects/how2apr2006.htm Recycled Pop Can Cow For instructions, please visit http://www.favecrafts.com/green-crafting/smashed-soda-can-animals
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 15 parts in all
Thank you for downloading this paper craft model of the California Condor. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 13 parts in all
Thank you for downloading this paper craft model of the Grevy's zebra. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and
More informationTrebuchet Construction Instructions
Trebuchet Construction Instructions Follow these instructions step by step to create your trebuchet. Materials: Trebuchet Template (6 pages cardstock) Trebuchet Template (1 page paper) One unsharpened
More informationAssembly Instructions for the Link Trainer
Assembly Instructions for the Link Trainer Edwin Link and his trainer: a brief history The Link Trainer holds a significant place in aviation history. It was the first true flight simulator, providing
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Three A4-sized sheets with 13 parts in all
Thank you for downloading this paper craft model of the Cape Penguin. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Entropía Universe Fan Art Papercraft Assault Rifle model 1 By Gustav Malasuerte Sagitta Mountain Fold Valley Fold Cut The Assault rifle model 1 is divided in 30 sections. If at some
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 15 parts in all
Thank you for downloading this paper craft model of the Little Spotted Kiwi. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationPrint. Cut, Score, Crease. Stage 1 Gluing. First, print out the pieces on good, thick card stock.
1. First, print out the pieces on good, thick card stock. 2. Then, the cutting. Oh, the cutting. Cut out all the pieces and score them paying close attention to the three varieties of line. Cut along the
More informationCardboard Model Buildings
Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is
More informationSnowman Gift Box Tower Designed By: Amanda Corbet December 2011
Snowman Gift Box Tower Designed By: Amanda Corbet December 2011 This adorable snowman gift box tower is the perfect way to shower someone special with gifts. Finished as shown this box is over 16 inches
More informationTHE PHANTOM SEMI Assembly Instructions Page 1.
THE PHANTOM SEMI Assembly Instructions Page 1. (Continued on next page...) THE PHANTOM SEMI Assembly Instructions Page 2. (Continued on next page...) THE PHANTOM SEMI Assembly Instructions Page 3. WHAT
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Three A4-sized sheets with 13 parts in all
Thank you for downloading this paper craft model of the SUMATRAN ORANG- UTAN. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this
More informationVol.3 Yellow Footed Tortoise
Vol. Yellow Footed Tortoise Thank you for downloading this paper craft model of the Yellow Footed Tortoise. By matching the names and numbered parts in the instructions, you and your family can complete
More informationThe Hearse Carriage Assembly Instructions Page 1.
The Hearse Carriage Assembly Instructions Page 1. The Hearse Carriage Assembly Instructions Page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a needle, two toothpicks, a sharpened pencil,
More informationAllied Tool is a freelance model of a small manufacturing company that grew from production in a home basement to a new building. Assume a gentleman starts assembling gauges in his basement and the business
More informationSaucer. Tea Party Hat
Tea Party Crafts Serving Bowl Teacups Saucer Saucer Sugar Cubes Tea Party Hat Tea Party Hat Teacups What you'll need White plastic cups Wa shi tape (½-in.-wide or ⅝-in.-wide tape works best) Printouts
More informationHOW TO HOLD YOUR OWN ELMER PARADE
HOW TO HOLD YOUR OWN ELMER PARADE You can hold an Elmer parade in a library, a bookshop, a classroom, at home, outside anyw! HERE ARE SOME IDEAS FOR YOUR PARADE: Encourage everyone to show their colours
More informationBig Oz. Rocket. User Guide V0313
Big Oz Rocket User Guide 59824 V0313 Materials Included The Big Oz Rocket Kit should include the following materials. If something is missing, contact Customer Service at 800-358-4983. 20-ounce plastic
More informationModern Gas Station backdrop building kit in HO scale
Modern Gas Station backdrop building kit in HO scale This kit includes all building parts, pumps, signs, and base milled in white styrene plastic, clear window glazing, Plastruct Ridgid Clay Tile roofing,
More informationDusty Harp Pickup for lever harps
q P10 for 24 30 string harps q P20 for 32 40 string harps Dusty Harp Pickup for lever harps Installation Kit Contents and Diagram of Pickup A. Pickup Element B. Grommet C. Pickup Harness D. Jack E. F.
More informationJuego Operación para Makey Makey
Índice para Step 1: Materials...1 Step 2: Paint your operation game board...2 Step 3: DIY non-conductive tweezers...3 Step 4: Operating spots and back of the game board...4 Step 5: Make the body part objects
More informationA How-To From CHRYSANTHEMUMS
A How-To From DIPPED-Tip CHRYSANTHEMUMS How-to Materials Adding Color For personal use only / Copyright THUSSFARRELL, LLC. All rights reserved. 5 - Paper to Petal How-to How-to Materials Double-sided
More informationRead This Before Printing Anything!
Read This Before Printing Anything! coca-cola polar bears papercraft 2 guidelines Printing When printing with Adobe Reader, it is important to use proper print settings 1 for correct alignment and scaling.
More informationWelcome to our Wee Work section that will provide you and your. child with a learning activity that will engage their senses and
Welcome to our Wee Work section that will provide you and your child with a learning activity that will engage their senses and emerging skills. Scroll down the page to find the activity that meets your
More informationVoltage Village - Glowing House Set - Bare ConductiveBare Conductive. Step-by-Step instructions to assemble your very own Voltage Village!
SEARCH CART NAV Voltage Village Glowing House Set Step-by-Step instructions to assemble your very own Voltage Village! INFORMATION SUGGESTED TUTORIALS In this tutorial we will show you how to assemble
More informationPaper Pinwheel. Supplies
Paper Pinwheel 1. Draw some lines. Measure and cut a square piece of paper.» Use the ruler and pen to draw lines from each corner of the paper towards the center. These lines should be half the size of
More informationCeltic door harp Necessary tools:
.004 Celtic door harp Necessary tools: Fretsaw Drill ø/5mm Sandpaper/ file Wood glue Side cutters Pencil,ruler Scissors Bradawl Double sided tape Machine vice Please Note The OPITEC range of projects is
More informationMystery Architecture. Kathy Meloche
Mystery Architecture Kathy Meloche Kathryn.meloche@gmail.com The Event Mystery Architecture requires students to build something using only the materials provided by the event supervisor The objects are
More information6 Festive DIY Projects for the Christmas Season
6 Festive DIY Projects for the Christmas Season In this ebook, you ll learn how to make... Craft 1: Foam Christmas Wreath Craft 2: DIY Snowy Diorama Craft 3: Reindeer Buddies Craft 4: Snowman Family Craft
More informationPage 1 of 5. Instructions for assembling your PacknMove boxes
Instructions for assembling your PacknMove boxes The majority of our boxes are very easy to construct, but a couple might look like cardboard origami at first. If you are having any problems constructing
More informationAutumn Tree Colouring Sheet. Giant Autumn Leaf. All About Autumn! Autumn Leaves. Autumn Activity Book. Autumn Symbols. Owl Colouring Sheet.
BLM All About NameAutumn These Blackline Masters can be completed in a variety of ways. The activities are designed to be stimulating, crafty and fun! They range from simple colouring to more complex artworks
More informationThe Bleak Estate Assembly Instructions - Page 1.
The Bleak Estate Assembly Instructions - Page 1. The Bleak Estate Assembly Instructions - Page 2. The Bleak Estate Assembly Instructions - Page 3. WHAT YOU'LL NEED: Scissors, glue (or a glue stick), a
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationActivity Gluing It All Together
Activity 5.1.2 Gluing It All Together Introduction The first commercial glue, created around 1750, was made from fish. Other early adhesives used natural rubber, animal bones, blood, starch, and milk protein
More information(NCC-1701) Red Alert Indicator. Helmsman & Navigator Station Front. MOUNTAIN fold tabs. Helmsman & Navigator Stations Base
26 Defense Systems Monitor Station and Base 26 Engineering Sub-Systems Checkout Station and Base along these lines DEFENSE SYSTEMS MONITOR STATION along this line 12 13 Red Alert Indicator Helmsman & Navigator
More informationFollow the numbered instructions that correspond to an illustration below:
Folded Christmas Star Materials needed: Colored or white paper X-acto knife and cutting mat or scissors Ruler Patience and practice :) Instructions Follow the numbered instructions that correspond to an
More informationc Fold the two outer flaps inside and then fold in half so it so it looks like this. While it is folded cut along the red lines to create a notch.
Building the Paper Dice Tower Tools Needed: A pen, pencil, or bone folder for scoring the paper (this will make folding easier). Paper (heavy card stock preferred). Scissors, a razor knife, and straight
More informationInventor s House (Alternate Version)
Inventor s House (Alternate Version) Detailed Building Instructions Model Designed by Dave Graffam Model Built and Instructions Provided by Jerry Jensen For more of Dave s Models please visit www.davesgames.net
More informationWitches Brew Halloween Home Decor Designed By: Julie Beltramo September 2013
Witches Brew Halloween Home Decor Designed By: Julie Beltramo September 2013 This trio of canvases makes for a fun and festive wall hanging for the upcoming Halloween happenings! It s a great project to
More informationby over thirty years of proven reliability in Kawai pianos. ABS
THE EPITOME OF STUDIO PIANO ELEGANCE EXCLUSIVE ABS STYRAN ACTION PARTS The innovative use of ABS Styran in all our piano actions is one of the chief reasons why a Kawai piano will maintain stable touch
More information