Course title: Hands-On Competency Based Training in Insulation Power Factor for Power Transformer (and other substation apparatus)

Transcription

1 Course title: Insulation Power Factor for Power Transformer (and other substation apparatus) TESDA Accredited Transformer theoretical basics Phasor, classification, construction, cooling Tap changes, rating and specifications, standards Insulating oil, transformer loading, protection Electrical tests and maintenance and internationally accepted tests Transformer applications and manufacturing Hands on testing Assesments by examination Course Background: The EPIRA law mandates reliability, efficiency, and practically zero downtime in substation apparatus operation. Technical services group, power system maintenance team and facilities maintenance engineers are the front liners in ensuring the asset longevity operation and recovery of investments. The unpredictability of operation lies in the way substation assets are maintained and this technical training will guide experienced power transformer maintenance engineer improve his knowledge based on international standards. Course highlights Identifies performance requirements Presents transformer basics applications, manufacturing and hands on testing on off line power transformer at site Emphasize methods in insulation power factor testing Proposes plans on periodic, predictive and condition based maintenance Who should attend? This course will enhance the understanding and increase competencies for: Electrical Engineers in the utilities Electrical Engineers and electricians in commercial and industrial maintenance Electrical consultants and designers and electrical project managers Electrical engineering graduates who would like to be test engineers and technicians Page 1 of 6

2 Course Fee: Php 14, per person inclusive snacks, lunch, and certificate of completion. At the end of the training, the participants will receive the following: Certificate of completion Continuing Professional Education points (as required by PRC and IIEE) Substation Apparatus Maintenance in Predictable Ways: This practical course provides you with methods and procedures used internationally. Predictive, periodic or condition based (on line diagnostics and monitoring) maintenance are the basic which methodology is predictable. The course includes a novice, or an experienced maintenance technical staff should know to be effective as a test engineer, and for an advanced test engineer to learn new concepts in power transformer testing, filtering, and interpretation. The course will also focus on issues related to causes of bushing breakdown, arresters, oil impedance, leakage reactance and most of all short circuit rating a transformer can withstand. Please note the course content does not include DGA (dissolved gas analysis) completely. Course Outline At the end of the program, the participants will be able to: Discuss basic transformer fundamentals. Understand the latest transformer technology. Discuss making of a transformer. Enumerate basic oil and transformer testing methodology protocol. Identify and solve concerns of on the job practices. Discuss equipment application. Demonstrate actual IPF methodology and testing procedures. Page 2 of 6

3 DAY 1 A. POWER TRANSFORMER THEORY Introduction Theory of Operation Electromagnetism Magnetic Circuits Classification of Transformers Losses in Transformers Performance Tests Basic Insulation System Transformer Rating Transformer Connections B. MAKING OF A TRANSFORMER Engineering Process Key Materials Manufacturing Process Design Optimization Process Interactions with Customers Electrical Design Process Mechanical Design Process Finite Element Analysis DAY 2 Manufacturing Process INSULATION POWER FACTOR TESTING Overall Test Connection Test Summary Calculated CHL Two Winding Transformer Overall Test Sheet Power and Distribution Transformers Analysis of Oil Filled Power Transformer DAY 3 HANDS-ON: TRANSFORMER TEST PROCEDURES Power Transformer Bushing Leakage Reactance or Short Circuit Impedance Test Transformer Exciting Current Test Transformer Turns Ratio Tests Course Facilitators and Technical Speakers Engr. Rodolfo R. Penalosa, PEE, PECE, Apec Engr. Engr. Penalosa s experience comes from an extensive background of more than 30 years as a Professional Electrical Engineer. He is also a technical speaker and an official delegate for various conferences and seminars such as Power System Maintenance in Doble Engineering Conference in Boston, Electrical Design Simulation Analysis on Short Circuit at San Diego California and Power Quality High Voltage Power Factor Correction with Harmonics at Finland to name a few. Engr. Penalosa is also the former Chairman of the Board of Electrical Engineering of the Professional Regulation Commission, former Chairman for the Technical Panel for Engineering at Commission on Higher Education (CHED) and Former President at Institute of Integrated Electrical Engineers of the Philippines (IIEE) and Society for Philippine Electrical Contractors and Suppliers Inc (SPECS). Engr. Penalosa is currently the President for WESTCO Electrical Equipment Corp and PAMAV Training Institute of Technology Center, Inc. Page 3 of 6

4 Engr. Eduardo M. Pabuna, Jr. RME 15 years of experience in electrical design and substation testing makes Engr. Pabuna an ideal course facilitator for Electrical Design and Substation maintenance. He combines the theories and updates it with the industry practice while maximizing the use of the Electrical Design and Simulation Analysis Paladin software. Engr. Pabuna is also a resource speaker for various international and local conferences/seminars such as IIEE, Meralco and ABB to name a few. His engineering practice also involves supply, installation, testing and commissioning for major clients like National Power Corporation, Cebu-Mactan Interconnection project, Lafarge Cement, Clark Substation NGCP Project, San Miguel Corporation and various electric cooperatives. Engr. Pabuna is currently the Engineering Head of WESTCO Electrical and Equipment Corp. Engr. Alex Castro, REE Engr. Castro s exposure to testing of substation apparatus such as power transformers, potential transformers, current transformers, circuit breakers, disconnect switches and surge arresters equip him with the technical knowledge and experience to share in his seminars. His experience also comes from Meralco Industrial Engineering Services Corp. as a Project Supervisor. He is currently the Section Head of the Engineering department for WESTCO Electrical and Equipment Corp. * Course facilitators and technical speakers may vary per course depending on their schedule and availability. Changes may be unannounced. * Page 4 of 6

5 Registration Form Please complete all fields (one form for each participant) Course Title Course Date Complete name (to appear on certificate) Designation Company name Title First name Last Name Suffix Telephone Mobile number Address Billing and coordination purposes: Company contact person Name Designation Telephone Mobile Company TIN Page 5 of 6

6 Confirmation and Payment: 1) To confirm your registration, please deposit the training fee to the following bank: Bank : Chinabank (Quezon Avenue, Quezon City, Branch) C/A #: ) Please forward the registration form together with a scanned copy of the deposit slip. Cancellation Policy: 1. Should the number of participants not reach the minimum to form a class, PamavTech may cancel or reschedule the class. 2. Should a participant cancel, please send your cancellation at least 7 working days before the class. If the cancellation is received after 7 days, a full-course fee will be charged as cancellation fee. About PAMAV Training Institute and Technology Center, Inc. (PamavTech) PamavTech was formed in 2005 to offer competency training programs and continuous education that offers up-to date skills and knowledge thru exposure to various current industry practices. We are a pioneer training center in the Philippines that offers competency-based training for Engineering professionals. PamavTech offers public and in-house training seminars Courses available Technical Programs Substation Maintenance Insulation Power Factor with Hands-On Power Quality and Harmonics Power System Simulation Analysis (Power Analytics - Paladin DesignBase Software) Thermal Imaging Protective Relaying Professional Development Programs Happy at the Workplace Modules - Time and Stress Management - Health and Nutrition - Team building Engineer to Leader Modules - Shifting to Corporate Image and Business Etiquette Effective Communication Skills Leadership Skills - Project Management - Business Planning PamavTech contact information Address: 7 th Floor Integrated Professional Office Building, 14 Quezon Avenue, Quezon City, Philippines Telephone (+632) Mobile Website contact@pamavtech.com Facebook: Insulation Power Factor for Power Transformer 6