3.6 Implementation. Dr. Tarek A. Tutunji Philadelphia University, Jordan. Engineering Skills, Philadelphia University
|
|
- Clare Fletcher
- 5 years ago
- Views:
Transcription
1 3.6 Implementation Philadelphia University, Jordan
2 Preview In the previous sequence, Analysis and Design was discussed. In this sequence, Implementation will be presented.
3 Seven Design Steps 1. Define the Problem 2. Gather Information 3. Propose Solutions 4. Study the Solutions 5. Analyze and Design the chosen solution 6. Implement the Design 7. Evaluate Performance
4 Implementation Construction and manufacturing of the solution Work with manufacturing engineers from the beginning Supply working drawings, documentation, and plans for manufacturing Specify manufacturing tools and processing to be used Build Prototype
5 Implement the Concept At this stage in the design process, A clear understanding of the problem has been formulated The design concept has been chosen Drawings, schematics, flow codes, and list of materials have been developed. So, next step is to implement the design concept
6 Implement the Concept Many problems might arise when trying to implement a design concept This is the normal The key is Not to be discouraged Learn from mistakes Have fun The result: a fully operational system that is ready to be tested.
7 Implement the Design The hardware should be constructed and tested to verify the design concept and analysis Transform the design from paper to physical reality Two main techniques are available: Quick-and-Dirty Prototype
8 Quick-and-Dirty Construction from plastics, wood,.. etc. Quick and easy to build Relatively cheap Used to check clearance, assembly technique, manufacturing considerations, and appearance.
9 Quick-and-Dirty: Bread Boards
10 Prototype A prototype can be defined as a model that represents a product or system. This model is usually used for functionality testing and product visualization. Prototyping is essential in the development of products and all industrial nations have prototyping centers. In fact, prototyping plays a major role in the advancement of technology.
11 Prototype In the prototyping development cycle, initial prototypes are built, tested, and then reworked as necessary until an acceptable prototype is finally achieved from which the complete system or product can be developed. Three types of prototyping Rapid Prototyping Virtual Prototyping PCB Prototyping
12 Rapid Prototyping Produces physical prototypes in short time (within hours or days rather than weeks). These prototypes are frequently used to quickly test the product's look, dimension, and feel. Rapid prototyping usually can result in plastic objects.
13 Virtual Prototyping Computer-based without the option of a physical part or object. It uses virtual reality to create product prototypes and test their properties. It provides a virtual 3-D prototype that can be manipulated from all views and angles. The computer program can then test many aspects of the product such as vibration, forces, materials and weight.
14 PCB Prototyping The production of a functional Printed Circuit Board (PCB). The product can then be tested for its functionality and reliability
15 CAD / CAM Computer-Aided Design (CAD) A designer starts with an idea of a new product and uses the CAD software to create a preliminary design. The preliminary design can also be analyzed for functionality as the design is being created. Modifications and reanalyzes of the computer model can be done Computer-Aided manufacturing (CAM) Used to drive appropriate machinery to physically create the part. The entire design cycle is shortened Engineers can go from design to prototype in a matter of days, instead of weeks or months
16 CAD / CAM
17 Prototypes
18 Prototyping Advantages Provides the proof of concept Shows the users how the final system would look like Reduces development costs Increases system development speed and quality Assists to identify any problems with early designs Refines the potential risks associated with the product delivery
19 Additional tasks Assess progress and discuss quality, safety, and technical concerns Integrate changes from design reviews Verify the requirements, connections, and interfaces Coordinate with staff to ensure proper fabrication and installation
20 Conclusion The 6 th step in the design process, Implementation, was presented The implementation can be a quick-and-dirty or a prototype Prototypes are divided into three types Rapid Virtual PCB
PiXL Independence. Technology Answer Booklet KS4. CAD, CAM and ICT. Contents: I. Multiple Choice Questions 10 credits in total
PiXL Independence Technology Answer Booklet KS4 CAD, CAM and ICT Contents: I. Multiple Choice Questions 10 credits in total II. III. IV. Shorter Answer Questions 10 credits each Exam Style Questions 100
More informationIncluding: Synthesis of Ideas Justification and Recording Decisions Taken Presentation Techniques Modelling Techniques
Development & Refinement Including: Synthesis of Ideas Justification and Recording Decisions Taken Presentation Techniques Modelling Techniques Synthesis of Ideas Designers often start off with lots of
More informationA New Approach to Teaching Manufacturing Processes Laboratories
A New Approach to Teaching Manufacturing Processes Laboratories John Farris, Jeff Ray Grand Valley State University Abstract The manufacturing processes laboratory taught in the Padnos School of Engineering
More informationCompany Overview. Brainchild Engineering, Inc. Helping inventors and innovators make their ideas reality
Brainchild Engineering, Inc. Helping inventors and innovators make their ideas reality Company Overview What is Brainchild Engineering? Brainchild Engineering is a company dedicated to helping innovators
More informationCESC Scope and Sequence Design Technology
CESC Scope and Sequence Design Technology - 2016 Year 7 Year 8 Single Term Units Unit title/s: Pencil Holder Unit title/s: Skill tester Pencil holder design task Materials specialisation- Wood Introduction
More information- 9_12TI7973-QUIZ2 - Print Test
Page 1 of 12 Report: Test Answer Key District: Madison Test: Description: Unit B EDP Form: 501 1. Stereolithography, selective laser sintering, ballistic particle manufacturing, and laminated object manufacturing
More informationMachine Elements & Mechanisms. Course Outcomes. Course Description. An applications course Uses a wide range of your background courses:
Machine Elements & Mechanisms An applications course Uses a wide range of your background courses: Statics & Dynamics Strength of Materials Materials and Processes Manufacturing Processes Fluid Mechanics
More informationWhat is CAD? Computer Aided Design
CAD What is CAD? Computer Aided Design 2 and 3 Dimensional CAD: Using 2-dimensional CAD software, designers can create accurate, scaled drawings of parts and assemblies for designs. It can also be used
More informationThe Collaborative Digital Process Methodology achieved the half lead-time of new car development
The Collaborative Digital Process Methodology achieved the half lead-time of new car development Hiroshi Katoh (Digital Process Ltd.) Abstract A Japanese automotive manufacturer finally achieved the less
More informationINTEGRATED DESIGN & TEST
National Instruments PCB Austin 2008 INTEGRATED DESIGN & TEST Vincent Accardi General Manager National Instrument Electronics Workbench Group ni.com/multisim 1 National Instruments Electronics Workbench
More informationLL assigns tasks to stations and decides on the position of the stations and conveyors.
2 Design Approaches 2.1 Introduction Designing of manufacturing systems involves the design of products, processes and plant layout before physical construction [35]. CE, which is known as simultaneous
More informationResearch on aircraft components assembly tolerance design and simulation technology
3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015) Research on aircraft components assembly tolerance design and simulation technology Wei Wang 1,a HongJun
More informationUnit 5: Unified Software Development Process. 3C05: Unified Software Development Process USDP. USDP for your project. Iteration Workflows.
Unit 5: Unified Software Development Process 3C05: Unified Software Development Process Objectives: Introduce the main concepts of iterative and incremental development Discuss the main USDP phases 1 2
More informationGCSE Design and Technology Specification - NEA Guidance
GCSE Design and Technology 2017 Specification - NEA Guidance Non Examined Assessment NEA Non Examined Assessment 50% of the qualification. Approximately 35 hrs of candidate work. Design & Make task from
More informationGCSE Design and Technology Specification - NEA Guidance
GCSE Design and Technology 2017 Specification - NEA Guidance Non Examined Assessment NEA Non Examined Assessment 50% of the qualification. Approximately 35 hrs of candidate work. Design & Make task from
More informationCreating another Printed Circuit Board
Appendix C Creating another Printed Circuit Board In this chapter, we will learn the following to World Class standards: Starting with a Finished Schematic Creating the Layers for the Printed Circuit Board
More informationOn Demand Manufacturing. Your One Stop Shop from Prototyping to Production
On Demand Manufacturing Your One Stop Shop from Prototyping to Production On Demand Manufacturing Services 3D Systems On Demand Manufacturing Services offers a broad range of processes and technologies
More informationRequirements Gathering using Object- Oriented Models
Requirements Gathering using Object- Oriented Models Cycle de vie d un logiciel Software Life Cycle The "software lifecycle" refers to all stages of software development from design to disappearance. The
More informationCabinetmaker Level 3
Level 3 A5 Jigs, Fixtures and Templates Duration: 35 hours 14 hours 21 hours Upon completion of this unit the apprentice will demonstrate knowledge of jigs, fixtures, and templates, materials and hardware,
More informationDesign and Technology Subject Outline Stage 1 and Stage 2
Design and Technology 2019 Subject Outline Stage 1 and Stage 2 Published by the SACE Board of South Australia, 60 Greenhill Road, Wayville, South Australia 5034 Copyright SACE Board of South Australia
More informationHarmony Castings, LLC TPi Arcade, INC
Harmony Castings, LLC TPi Arcade, INC Using the V-PROCESS V for Production and Prototype Casting Requirements What is the V-PROCESS V and how it works V-PROCESS produces castings with a smooth surface,
More informationPRODUCT DESIGN PROCESS
PRODUCT DESIGN PROCESS Introduction Product design has two aspects: technical design and aesthetic design. Technical design is process of defining all the performance and physical characteristics of a
More informationDesign Issues in Virtual Reality
Dr. Judy M. Vance Associate Professor Mechanical Engineering Iowa State University Ames, Iowa Task Develop a VR application to amplify the human ability to understand or evaluate "some concept" What does
More informationUser2User The 2007 Mentor Graphics International User Conference
7/2/2007 1 Designing High Speed Printed Circuit Boards Using DxDesigner and Expedition Robert Navarro Jet Propulsion Laboratory, California Institute of Technology. User2User The 2007 Mentor Graphics International
More informationUNDERSTANDINGS: Students will understand that
Curriculum Framework Computer Integrated Manufacturing Unit 2 Manufacturing Processes Lesson 2.3 Product Development ESTABLISHED GOALS It is expected that students will G1 Demonstrate an ability to identify,
More informationInk-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials
Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials Eduardo Napadensky, Objet Geometries Ltd., Israel Current additive type manufacturing technologies such
More informationComputer Games Laboratory. Prototyping
Recommended Reading: Chapter on 2 Why a prototype? Creating a game without a prototype is like shooting a movie without a script. A prototype adds more to a game than a script or doc can do: Interactivity
More informationPADS Layout for an Integrated Project. Student Workbook
Student Workbook 2017 Mentor Graphics Corporation All rights reserved. This document contains information that is trade secret and proprietary to Mentor Graphics Corporation or its licensors and is subject
More informationFertigungsdaten aufbereiten mit GerbTool und VisualCAM
FlowCAD Webinar Fertigungsdaten aufbereiten mit GerbTool und VisualCAM Overview Introduction News 16.2 Gerber Format Importing Data Layer Compare DFM Analysis Modifications on existing designs artwork
More informationDigital Systems Design
Digital Systems Design Digital Systems Design and Test Dr. D. J. Jackson Lecture 1-1 Introduction Traditional digital design Manual process of designing and capturing circuits Schematic entry System-level
More information5/28/2015. Sharif University of Technology. Session # 20. Instructor. Class time. Course evaluation. Department of Industrial Engineering
Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # 20 Instructor Omid Fatahi Valilai, Ph.D. Industrial Engineering Department, Sharif University
More information[ BOOTCAMP : 6 DAYS ] Digital Fabrication at the Green Fab Lab Barcelona
[ BOOTCAMP : 6 DAYS ] Digital Fabrication at the Green Fab Lab Barcelona Day 1 : > Introductory tour of the Green Fab Lab and facilities. > Review the week: Documentation and Description of objectives
More informationThe new motor and motor mount. The remote control and 3 axis DRO mounted
Modifying a Mill/Drill I bought this mill/drill about 4 years ago and knew from the very beginning that some changes were going to have to be made. I am a big fan of VFDs (variable frequency drives) to
More informationUNIT T15: RAPID PROTOTYPING TECHNOLOGIES. Technologies
Unit T15: Rapid Prototyping Technologies Unit code: R/503/7413 QCF level: 6 Credit value: 15 Aim This unit aims to develop learners understanding of rapid prototyping through the study of their evolution,
More informationUNIT Computer Aided Draughting (CAD) for Engineers (SCQF level 5)
National Unit Specification: general information CODE F5H4 11 SUMMARY This Unit may form part of a National Qualification Group Award or may be offered on a free standing basis. This largely practical
More informationAugmented reality for machinery systems design and development
Published in: J. Pokojski et al. (eds.), New World Situation: New Directions in Concurrent Engineering, Springer-Verlag London, 2010, pp. 79-86 Augmented reality for machinery systems design and development
More informationMARTONGATE PRIMARY SCHOOL TECHNOLOGY POLICY
MARTONGATE PRIMARY SCHOOL TECHNOLOGY POLICY Revised by: Mrs Sarah Musgrave Date: April 2015 1 The design of an object defines its meaning and ultimately it s utility. The nature of the connection between
More informationTechnology Education 6 12
Technology Education 6 12 Section 55 1 Knowledge of the nature and impacts of technology 1. Identify the characteristics of technology. 2. Analyze a technological system in terms of inputs, processes,
More informationQ1. Computers are an important part of product design and manufacture.
Q1. Computers are an important part of product design and manufacture. Describe how a designer might use a computer in the development of the product you have chosen. (Total 6 marks) Q2. Data transfer,
More informationThe Effects of 3D Information Technologies on the Cellular Phone Development Process
The Effects of 3D Information Technologies on the Cellular Phone Development Eitaro MAEDA 1, Yasuo KADONO 2 Abstract The purpose of this paper is to clarify the mechanism of how 3D Information Technologies
More informationRESTORE JOBS. A submission to BAY COUNTY RESTORE ACT ADVISORY COMMITTEE from GULF COAST STATE COLLEGE & Industry Partners
RESTORE JOBS A submission to BAY COUNTY RESTORE ACT ADVISORY COMMITTEE from GULF COAST STATE COLLEGE & Industry Partners RESTORE Jobs RESTORE Jobs is a 3D modeling and manufacturing program that will train
More informationGATE LIMIT RELAY KIT INSTALLATION INSTRUCTIONS GATE OPERATORS:
GATE LIMIT RELAY KIT INSTALLATION INSTRUCTIONS GATE OPERATORS: SW420/470/490, SL540/570/580/590 PARTS SUPPLIED Part # Qty Description 01-20322 1 Modification Instructions 27-20108 2 Cable Tie 76-20431
More informationVIRTUAL REALITY APPLICATIONS IN THE UK's CONSTRUCTION INDUSTRY
Construction Informatics Digital Library http://itc.scix.net/ paper w78-1996-89.content VIRTUAL REALITY APPLICATIONS IN THE UK's CONSTRUCTION INDUSTRY Bouchlaghem N., Thorpe A. and Liyanage, I. G. ABSTRACT:
More informationHonors Drawing/Design for Production (DDP)
Honors Drawing/Design for Production (DDP) Unit 1: Design Process Time Days: 49 days Lesson 1.1: Introduction to a Design Process (11 days): 1. There are many design processes that guide professionals
More informationGCSE Design and Technology Specification - Course Structure
GCSE Design and Technology 2017 Specification - Course Structure Effective delivery of specification content (Core and In depth). Knowledge and understanding to prepare for examination. Skills to undertake
More informationSPS TECHNIK. everything from a single source
SPS TECHNIK everything from a single source planning and execution simulation electrics and mechanics design production, mounting software development commissioning after-sales service PRODUCTS AND SERVICE
More informationPrototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst]
Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst] Pressure on time to market urges for new ways of faster prototyping. Key words: Rapid prototyping, rapid tooling,
More informationDesign, Technology and Engineering
BOARD-ACCREDITED, PRE-EDITED DRAFT Design, Technology and Engineering 2020 Subject Outline Stage 1 and Stage 2 This subject outline has been accredited. It is provided in draft, pre-edited form for planning
More informationAltiumLive 2017: ANNUAL PCB DESIGN SUMMIT
AltiumLive 2017: ANNUAL PCB DESIGN SUMMIT The Four Pillars of PCB Design for Creating a Successful IoT Product Presenter Hieu Duong San Diego, CA October 3 rd -4 th, 2017 The Four Pillars of PCB Design
More informationEngineering Diploma Resource Guide ST150 ETP Research & Design (Engineering)
Engineering Diploma Resource Guide ST50 ETP Research & Design (Engineering) Introduction Whether we are looking to improve a current system or design a completely new product for the market place, we have
More informationIntegrating Rapid Prototype as Design : A Case Study in Product Design Education
NZ RAPID PRODUCT DEVELOPMENT CONFERENCE 2011 FEBRUARY 7-8, AUCKLAND UNIVERSITY OF TECHNOLOGY, AUCKLAND, NEW ZEALAND Integrating Rapid Prototype as Design : A Case Study in Product Design Education Withell;
More informationComputer Numerical Control (CNC) Hacettepe University Chemical Engineering Department
Computer Numerical Control (CNC) Banu Akar Duygu Gökçe Neşe Kaynak Meltem Erdi Hacettepe University Chemical Engineering Department 22.12.2010 CONTENT 1. What are NC & CNC? 2. History 3. CNC system Elements
More informationGCSE Design and Technology Specification - Course Structure
GCSE Design and Technology 2017 Specification - Course Structure Effective delivery of specification content (Core and In depth). Knowledge and understanding to prepare for examination. Skills to undertake
More informationComputer Aided Design and Engineering (CAD)
Oakland Community College 2017-2018 Catalog 1 Computer Aided Design and Engineering (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well
More informationProject Plan Augmented Reality Mechanic Training
Project Plan Augmented Reality Mechanic Training From Students to Professionals The Capstone Experience Team Union Pacific Justin Barber Jake Cousineau Colleen Little Nicholas MacDonald Luke Sperling Department
More informationRecommended Work Keys Scores for Precision Machining
Great Oaks Precision Machining Essential Skills Profile This profile provides an outline of the skills required for successful completion of this career program. Additional information is located on the
More informationImplementing BIM for infrastructure: a guide to the essential steps
Implementing BIM for infrastructure: a guide to the essential steps See how your processes and approach to projects change as you adopt BIM 1 Executive summary As an ever higher percentage of infrastructure
More informationOrbital ATK JT File Use Case Matt Johnston. 5-Oct-16
Orbital ATK JT File Use Case Matt Johnston 5-Oct-16 Overview Orbital ATK at a Glance MBD or 3D Model with PMI Model Based Plan Model in NX and JT file in TcVis What we are doing well Real time use cases
More informationAcalanes Union High School District Adopted: 05/18/05 SUBJECT AREA CAREER/TECHNICAL EDUCATION
Adopted: 05/18/05 SUBJECT AREA CAREER/TECHNICAL EDUCATION COURSE TITLE: ADVANCED DESIGN AND FABRICATION TECHNOLOGY II - IV CBEDS ASSIGNMENT CODE: 5601 COURSE CODE: T0855e, T0856e, T0857e GRADE LEVEL: 10-12
More informationUS Media Contact for Altium:
Media Release US Media Contact for Altium: Emily Taylor Weber Shandwick Worldwide 519 SW 3 rd Avenue, Suite 600 Portland, OR 97204 United States www.webershandwick.com Telephone: 503-552-3733 Email: etaylor@webershandwick.com
More informationINTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15-18, 2005 HUMAN MODELING BENEFITS IN WORKSTATION DESIGN
INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15-18, 2005 HUMAN MODELING BENEFITS IN WORKSTATION DESIGN Abstract François Gauthier, Hugues Caron Human modeling has been used
More informationResearch Article Final Machining of Large-Scale Engine Block with Modularized Fixture and Virtual Manufacturing Technologies
Hindawi Engineering Volume 217, Article ID 3648954, 6 pages https://doi.org/1.1155/217/3648954 Research Article Final Machining of Large-Scale Engine Block with Modularized Fixture and Virtual Manufacturing
More informationNX CAM Update and future directions The latest technology advances Dr. Tom van t Erve
NX CAM Update and future directions The latest technology advances Dr. Tom van t Erve Restricted Siemens AG 2017 Realize innovation. NX for manufacturing Key capabilities overview Mold and die machining
More informationUMI3D Unified Model for Interaction in 3D. White Paper
UMI3D Unified Model for Interaction in 3D White Paper 30/04/2018 Introduction 2 The objectives of the UMI3D project are to simplify the collaboration between multiple and potentially asymmetrical devices
More informationfluidic factory preview» preview» preview modular 3D printer for fluidically sealed devices Microfluidic devices in minutes for as little as $1 each
fluidic factory modular 3D printer for fluidically sealed devices preview» preview» preview Microfluidic devices in minutes for as little as $1 each fluidic factory» overview Fluidic Factory is the world
More informationHybrid Additive/Substraction Method for Rapid Casting Prototypings with Light-Cured Sand
Paper ID #17439 Hybrid Additive/Substraction Method for Rapid Casting Prototypings with Light-Cured Sand Dr. Pavel Ikonomov, Western Michigan University Associate Professor of Engineering, Design, Manufacturing,
More informationObject-Oriented Design
Object-Oriented Design Lecture 2: USDP Overview Department of Computer Engineering Sharif University of Technology 1 Review The Unified Modeling Language (UML) is a standard language for specifying, visualizing,
More informationDrafting I. IC61 Summer TRADE AND INDUSTRIAL EDUCATION Career and Technical Education
Drafting I TRADE AND INDUSTRIAL EDUCATION Career and Technical Education IC61 Summer 2013 PUBLIC SCHOOLS OF NORTH CAROLINA State Board of Education Department of Public Instruction www.ncpublicschools.org
More information3D Port Creation & Simulator Builds
3D Port Creation & Simulator Builds The technology has moved on so much, it s incredible that we can now create large and extremely accurate bespoke ports for shipping companies, and, more importantly
More informationQualification Specification. Level 1 Diploma in Providing a Gateway to Smart Engineering
Qualification Specification Level 1 Diploma in Providing a Gateway to Smart Engineering ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Centre requirements 5 Support for candidates 5
More informationTheo du Plooy, ABB Technology day, May 2014 ABB RobotStudio VirtualRobot TM Technology. ABB Group May 27, 2014 Slide 1
Theo du Plooy, ABB Technology day, May 2014 ABB RobotStudio VirtualRobot TM Technology ABB Group May 27, 2014 Slide 1 RobotStudio - true offline programming RobotStudio is the easy-to-use, low cost software
More informationHow Digital Engineering Will Change The Way We Work Together To Design And Deliver Projects Adam Walmsley, BG&E, Australia.
How Digital Engineering Will Change The Way We Work Together To Design And Deliver Projects Adam Walmsley, BG&E, Australia. ABSTRACT Our industry is witnessing its biggest change since CAD was introduced
More informationDigitalization in Machine Engineering. Siemens MCD and Cadenas smart catalog components
Digitalization in Machine Engineering Siemens MCD and Cadenas smart catalog components Realize innovation. Siemens MCD and Cadenas smart catalog components Table of content Overview: Interdisciplinary
More informationModelling and Simulation of Tactile Sensing System of Fingers for Intelligent Robotic Manipulation Control
20th International Congress on Modelling and Simulation, Adelaide, Australia, 1 6 December 2013 www.mssanz.org.au/modsim2013 Modelling and Simulation of Tactile Sensing System of Fingers for Intelligent
More informationAssessment Blueprint AMBA Master Moldmaker Certification
Assessment Blueprint Test Code: 8281 Version: 01 Specific Competencies and Skills Tested in this Assessment: Advanced Planning and Review Redline a mold design Identify mold manufacturing cost issues Mold
More informationThe Development of Computer Aided Engineering: Introduced from an Engineering Perspective. A Presentation By: Jesse Logan Moe.
The Development of Computer Aided Engineering: Introduced from an Engineering Perspective A Presentation By: Jesse Logan Moe What Defines CAE? Introduction Computer-Aided Engineering is the use of information
More informationFixtures for Production of Modular Weld Tables
TSM 416 Technology Capstone Projects Undergraduate Theses and Capstone Projects 4-28-2017 Fixtures for Production of Modular Weld Tables Jeremy Andersen Iowa State University, jeremya@iastate.edu Cameron
More informationTangible interaction : A new approach to customer participatory design
Tangible interaction : A new approach to customer participatory design Focused on development of the Interactive Design Tool Jae-Hyung Byun*, Myung-Suk Kim** * Division of Design, Dong-A University, 1
More informationFORTUS 360mc/400mc and FDM 360mc/400mc 3D Production System. Site Preparation Guide Rev E
FORTUS 360mc/400mc and FDM 360mc/400mc 3D Production System Site Preparation Guide 107167-0005 Rev E Liability Statement The information in this document is subject to change without notice. Stratasys,
More informationTechnical Improvements and Front-Loading of Cellular Phone Mechanism Evaluation
Technical Improvements and Front-Loading of Cellular Phone Mechanism Evaluation V Masayuki Satou V Yutaka Nozaki V Taketsugu Kawamichi V Sigeo Ishikawa (Manuscript received July 10, 2007) Fujitsu has ensured
More informationHigh Volume Precision Plastic Parts
High Volume Precision Plastic Parts Miniature Custom Manufacturing Welcome to MCM! We are a custom injection molder who specializes in, but are not limited to, high volume injection molded parts with an
More informationENGINEERING GRAPHICS. Lecture 1: Introduction to Graphic Communication. Jazmin Ley University of Texas Rio Grande Valley
ENGINEERING GRAPHICS Lecture 1: Introduction to Graphic Communication Jazmin Ley University of Texas Rio Grande Valley Overview Graphics Communication in the Design Process Engineering Design Process:
More informationUser Interface Software Projects
User Interface Software Projects Assoc. Professor Donald J. Patterson INF 134 Winter 2012 The author of this work license copyright to it according to the Creative Commons Attribution-Noncommercial-Share
More informationNOW and NEXT BIM THE CONSTRUCTION PUZZLE- HOW TO MAKE EVERYONE WORK COLLABORATIVELY?
BIM An advanced tool to reduce costs and support environmental design in the UK NOW and NEXT THE CONSTRUCTION PUZZLE- HOW TO MAKE EVERYONE WORK COLLABORATIVELY? Building information Modelling Is an industry
More informationTABLE OF CONTENTS. Logging into the Website Homepage and Tab Navigation Setting up Users on the Website Help and Support...
TABLE OF CONTENTS Logging into the Website...02 Homepage and Tab Navigation...03 Setting up Users on the Website...08 Help and Support...10 Uploding and Managing Photos...12 Using the Yearbook Ladder...16
More informationA Study on the Impacts of Computer Aided Design on the Architectural Design Process
A Study on the Impacts of Computer Aided Design on the Architectural Design Process Halleh Nejadriahi, Kamyar Arab Abstract Computer-aided design (CAD) tools have been extensively used by the architects
More informationEstablishing a Culture of Technology Creativity & Innovation. Kevin Iwersen Chief Information Officer Idaho Judicial Branch
Establishing a Culture of Technology Creativity & Innovation Kevin Iwersen Chief Information Officer Idaho Judicial Branch When you think courts, do you think. Establishing a Culture of Technology Creativity
More informationDESIGN OF A LOW-COST CNC MILLING MACHINE, USING SOME ASPECT OF PARALLEL ENGINEERING CONCEPT
UNIVERSITY OF PITESTI SCIENTIFIC BULLETIN Faculty Of Mechanics And Technology AUTOMOTIVE series, year XXII, no. 26 DESIGN OF A LOW-COST CNC MILLING MACHINE, USING SOME ASPECT OF PARALLEL ENGINEERING CONCEPT
More informationProject 4.1 Puzzle Design Challenge
Project 4.1 Puzzle Design Challenge Introduction Have you ever looked at a product that has been well-designed? Do you find yourself asking questions such as, How did the designer think of that idea? or
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate
More informationEngineering Support for the Design of Electrohydraulic Drive Systems.
Engineering Support for the Design of Electrohydraulic Drive Systems. Engineering Support. Designing electrohydraulic drive systems requires optimum coordination between hydraulic, electronic and mechanical
More informationAdvance Steel Essentials
Advance Steel Essentials Course Length: 3 days This course is intended to give an overview of all of the basic commands that are required to create structures and associated documentation using the Autodesk
More informationThe company founded in Sweden in 1982 with the radical vision of developing the world s most effective bolt locking system.
Exceptional value In vehicle technology, forestry, processing, railroad, construction and any critical application worldwide the NORD-LOCK Bolt Securing System ensures security, thus averting expensive
More informationWORLDSKILLS STANDARD SPECIFICATION
WORLDSKILLS STANDARD SPECIFICATION Skill 03 Manufacturing Team Challenge WSC2017_WSSS03 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge, understanding
More informationTypical Project Life Cycle
Typical Project Life Cycle D. KANIPE 1/29/2015 Contract Initiation VISION REQUEST FOR INFORMATION REQUEST FOR PROPOSAL SOURCE EVALUATION BOARD RFI RFP Proposals Evaluated Companies Respond Companies Submit
More informationBuilding a bimanual gesture based 3D user interface for Blender
Modeling by Hand Building a bimanual gesture based 3D user interface for Blender Tatu Harviainen Helsinki University of Technology Telecommunications Software and Multimedia Laboratory Content 1. Background
More informationCOMPLEX PROTOTYPES AND SMALL SERIES. Additive Processes // CNC & Casting // Machining // Coating & Finishing
COMPLEX PROTOTYPES AND SMALL SERIES Additive Processes // CNC & Casting // Machining // Coating & Finishing A A CONTENT 03 WE ACHIEVE THE EXCEPTIONAL EVERY DAY // Alphaform was founded in 1996 as a specialist
More informationEGG 101L INTRODUCTION TO ENGINEERING EXPERIENCE
EGG 101L INTRODUCTION TO ENGINEERING EXPERIENCE LABORATORY 6: INTRODUCTION TO BREADBOARDS DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING UNIVERSITY OF NEVADA, LAS VEGAS GOAL: This section introduces
More informationGCSE Textiles Revision 2015 Exam = Tuesday 19th May = morning exam.
GCSE Textiles Revision 2015 Exam = Tuesday 19th May = morning exam. You have been asked to design at least one garment (clothing) inspired by the theme Science and Technology. 1 1) In the space below sketch
More informationACCELEROMETER BASED ATTITUDE ESTIMATING DEVICE
Proceedings of the 2004/2005 Spring Multi-Disciplinary Engineering Design Conference Kate Gleason College of Engineering Rochester Institute of Technology Rochester, New York 14623 May 13, 2005 Project
More information