- 9_12TI7973-QUIZ2 - Print Test

Size: px
Start display at page:

Download "- 9_12TI7973-QUIZ2 - Print Test"

Transcription

1 Page 1 of 12 Report: Test Answer Key District: Madison Test: Description: Unit B EDP Form: Stereolithography, selective laser sintering, ballistic particle manufacturing, and laminated object manufacturing are all examples of: (NCCTE.9_12.TI.7973.D502.01) Computer-aided manufacturing. Computer-numerical control. Rapid prototyping. Motion testing.

2 Page 2 of 12 Please use the following graphic for questions 2 through 9: 2. What happens when a particular stage in the linear design process proves unsatisfactory? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) All design activities stop and the whole project is terminated It may be necessary to return to a previous stage of the design process The design process continues and failures are ignored or covered up Models or prototypes

3 Page 3 of Which stage of the linear design stage includes activities such as collecting concepts and ideas, investigating legal requirements, determining the required materials and manufacturing methods, and determining the overall size requirements? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) 4. Which stage of the linear design stage includes activities such as computer-aided manufacturing and computer numerical control? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) 5. Which stage of the linear design stage includes activities such as refining initial design sketches and beginning to create 3D models? Refer to Figure D activities such as refining initial design sketches and beginning to create 3D models? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) 6. Which stage of the linear design stage includes activities such as analysis of need, estimating costs, identifying design requirements, and creating a time-line? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) Identification of design problem Problem-solving concepts and ideas Compromises solutions Models or prototypes Problem-solving concepts and ideas Compromises solutions Models or prototypes Production or working drawings Identification of design problem Problem-solving concepts and ideas Compromises solutions Models or prototypes Identification of design problem Problem-solving concepts and ideas Compromises solutions Models or prototypes

4 Page 4 of Which stage of the linear design stage includes activities such as kinematic/motion testing, life testing, finite element analysis, and thermal analysis? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) 8. Which activities occur during the Models & Stage of the linear design process? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) 9. Which activities occur during the Problem-Solving Concepts and Ideas Stage of the linear design process? Refer to Figure D (NCCTE.9_12.TI.7973.D502.01) Identification of design problem Problem-solving concepts and ideas Compromises solutions Models or prototypes Compromise solutions, refinement of design sketches, and 3D modeling Concepts & ideas collected, legal requirements investigated and material requirements Conduct analyses, kinematics testing, life testing, and finite element analysis Problem identification, analysis of need, costs, and design requirements Compromise solutions, refinement of design sketches, and 3D modeling Concepts & ideas collected, legal requirements investigated and material requirements Creating a prototype, kinematics testing, life testing, and finite element analysis Problem identification, analysis of need, costs, and design requirements 10. Linear design can be described as the: (NCCTE.9_12.TI.7973.D502.01) 11. All are desired in the creation of a new product EXCEPT: (NCCTE.9_12.TI.7973.D502.01) Creation of a new idea by using a 3D database as the nucleus of design. Development of a product through a series of sequential stages. Progression of a design through random surveys of diverse populations. Reverse engineering of an existing product by market research. Aesthetic appeal. Design objectives.

5 Page 5 of 12 Functional efficiency. Poor demand.

6 Page 6 of Aesthetic design of a structure includes what type of properties? (NCCTE.9_12.TI.7973.D502.01) 13. When a structure is designed for functionality, what should the structure be able to do upon completion? (NCCTE.9_12.TI.7973.D502.01) 14. Taking an idea from creation to fabrication can be described as the: (NCCTE.9_12.TI.7973.D502.01) 15. Which phase of the concurrent engineering design process includes analyses such as material properties, mechanism, functional, and human factors? (NCCTE.9_12.TI.7973.D502.02) Load and dispersement Mass and center of gravity Proportion and balance Tensile strength and elasticity Be pleasing to the eye and ergonomically correct Manage the malfunctions of automated robotic machines Operate successfully and accomplish its design purpose Perform in excessively stressful environments Course of engineering action. Design process. Development route. Linear production method. Preliminary design

7 Page 7 of Which phase of the concurrent engineering design process includes the creation of prototypes using processes such as stereolithography? (NCCTE.9_12.TI.7973.D502.02) 17. Which phase of the concurrent engineering design process includes the creation of 3D CAD models? (NCCTE.9_12.TI.7973.D502.02) 18. Which phase of the concurrent engineering design process includes the analysis of the production process? (NCCTE.9_12.TI.7973.D502.02) 19. Within concurrent engineering design, refinement activities such as rapid prototyping, manufacturing visualization, and simulations are part of: (NCCTE.9_12.TI.7973.D502.02) Preliminary design Preliminary design Preliminary design Analysis of production. Design analysis. Design visualization. Modeling.

8 Page 8 of Within concurrent engineering design, refinement activities such as material property analysis, mechanism analysis, functional analysis, and human factors analysis are part of: (NCCTE.9_12.TI.7973.D502.02) 21. Within concurrent engineering design, refinement activities such as simulation, animation, and developing charts, graphs and diagrams are part of: (NCCTE.9_12.TI.7973.D502.02) 22. Within concurrent engineering design, ideation activities such as evaluating preliminary ideas and selecting a design are part of: (NCCTE.9_12.TI.7973.D502.02) 23. Within concurrent engineering design, ideation activities such as writing and collecting notes about the design, creating sketches and/or models of the design, brainstorming design ideas, and synthesizing the design ideas are all part of: (NCCTE.9_12.TI.7973.D502.02) Analysis of production. Design analysis. Design visualization. Modeling. Analysis of production. Design analysis. Design visualization. Modeling. Design analysis. Preliminary design. Modeling Problem identification. Design analysis. Marketing. Preliminary ideas. Problem identification.

9 Page 9 of Within concurrent engineering design, ideation activities such as writing a problem statement, conducting research, gathering data, defining objectives, determining limitations of the design, and outlining a reasonable schedule are all part of: (NCCTE.9_12.TI.7973.D502.02) 25. Which phase of the concurrent engineering design process includes design visualization? (NCCTE.9_12.TI.7973.D502.02) 26. Which phase of the concurrent engineering design process includes design analysis? (NCCTE.9_12.TI.7973.D502.02) 27. Which phase of the concurrent engineering design process includes documenting? (NCCTE.9_12.TI.7973.D502.02) Design analysis. Preliminary design. Preliminary ideas. Problem identification.

10 Page 10 of Which phase of the concurrent engineering design process includes producing the final product? (NCCTE.9_12.TI.7973.D502.02) 29. Which phase of the concurrent engineering design process includes marketing? (NCCTE.9_12.TI.7973.D502.02) 30. Which phase of the concurrent engineering design process includes financing? (NCCTE.9_12.TI.7973.D502.02) 31. Which phase of the concurrent engineering design process includes problem identification? (NCCTE.9_12.TI.7973.D502.02) 32. Which phase of the concurrent engineering design process includes preliminary ideas? (NCCTE.9_12.TI.7973.D502.02)

11 Page 11 of 12

12 Page 12 of Which phrase is associated with concurrent engineering design more than linear design? (NCCTE.9_12.TI.7973.D502.02) 34. Since a comprehensive computer database serves as the basis for all aspects of design, manufacture, and marketing of a product within concurrent engineering design: (NCCTE.9_12.TI.7973.D502.02) 35. An advantage of concurrent engineering design over linear design is that: (NCCTE.9_12.TI.7973.D502.02) 36. One of the biggest advantages of concurrent engineering design over linear design is that in concurrent engineering design: (NCCTE.9_12.TI.7973.D502.02) Computer Aided Manufacturing Computer Integrated Manufacturing Computer Numerical Control Continuous Quality Improvement All team members typically work within the same building. Only engineers and designers have permission to access the database. The design team can be made up of members from all over the world. Working drawings must be used in order to manufacture parts. 3D modeling is used to create design parts. CNC is frequently used to manufacture parts. are used to test designs. Team members do not have to be in the same location. Design activity moves from one stage to the next. Planning for manufacturing is done when the working drawings are complete. The 3D database can be accessed by anyone in the design team. Typically one person completes the tasks in a particular stage.

ENGINEERING GRAPHICS. Lecture 1: Introduction to Graphic Communication. Jazmin Ley University of Texas Rio Grande Valley

ENGINEERING GRAPHICS. Lecture 1: Introduction to Graphic Communication. Jazmin Ley University of Texas Rio Grande Valley ENGINEERING GRAPHICS Lecture 1: Introduction to Graphic Communication Jazmin Ley University of Texas Rio Grande Valley Overview Graphics Communication in the Design Process Engineering Design Process:

More information

2014 New Jersey Core Curriculum Content Standards - Technology

2014 New Jersey Core Curriculum Content Standards - Technology 2014 New Jersey Core Curriculum Content Standards - Technology Content Area Standard Strand Grade Level bands Technology 8.2 Technology Education, Engineering, Design, and Computational Thinking - Programming:

More information

2009 New Jersey Core Curriculum Content Standards - Technology

2009 New Jersey Core Curriculum Content Standards - Technology P 2009 New Jersey Core Curriculum Content s - 8.1 Educational : All students will use digital tools to access, manage, evaluate, and synthesize information in order to solve problems individually and collaboratively

More information

Engineering Design. Conveying Design Through. Engineering Graphics & the

Engineering Design. Conveying Design Through. Engineering Graphics & the Engineering Design Communication Conveying Design Through Graphics Chapter 1 Engineering g Graphics & the Design Process Engineering Graphics Used to: VISUALIZE COMMUNICATE DOCUMENT MANUFACTURE design

More information

PROJECT LEAD The way. Quakertown community high school

PROJECT LEAD The way. Quakertown community high school PROJECT LEAD The way Quakertown community high school is a college recognized pre-engineering program designed to prepare students for the challenges of college classes. Quakertown Community High School

More information

Honors Drawing/Design for Production (DDP)

Honors Drawing/Design for Production (DDP) Honors Drawing/Design for Production (DDP) Unit 1: Design Process Time Days: 49 days Lesson 1.1: Introduction to a Design Process (11 days): 1. There are many design processes that guide professionals

More information

Automated Manufacturing

Automated Manufacturing Chapter 22 Automated Manufacturing LEARNING OBJECTIVES After studying this chapter, students will be able to: Define the term automation. Describe several automated production systems. Define the term

More information

Common Design Slides. The Design Process

Common Design Slides. The Design Process Common Design Slides The Design Process MechSE Design-Related Courses ME170: Computer-Aided Design ME199 DES/SAE: Competition Design Projects TAM252: Solid Mechanics Design ME270: Design for Manufacturability

More information

THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN

THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN OBJECTIVES 1. Describe the role of drawings in the design process. 2. Contrast concurrent versus traditional design processes. 3. List five professions that use

More information

PASSAIC COUNTY TECHNICAL INSTITUTE 45 Reinhardt Road Wayne, NJ. Academic Curriculum Unit Planner. Multimedia & CAD. Course # S7120.

PASSAIC COUNTY TECHNICAL INSTITUTE 45 Reinhardt Road Wayne, NJ. Academic Curriculum Unit Planner. Multimedia & CAD. Course # S7120. Multimedia & CAD Course # S7120 August 2018 Multimedia:CAD.docx Page 1 Unit Plan Title: Introduction to Proprietary & Open Source and Web-Based Programs 8.2.12.A.2 - Analyze a current technology and the

More information

ASPECTS IN DESIGN EDUCATION OF ENGINEERS AND INDUSTRIAL DESIGNERS AT POLITECNICO DI MILANO

ASPECTS IN DESIGN EDUCATION OF ENGINEERS AND INDUSTRIAL DESIGNERS AT POLITECNICO DI MILANO AEDS 2004 WORKSHOP 11-12 november 2004- Pilsen-Czech republic ASPECTS IN DESIGN EDUCATION OF ENGINEERS AND INDUSTRIAL DESIGNERS AT POLITECNICO DI MILANO Giorgio COLOMBO, Edoardo ROVIDA Keywords: Design

More information

3.6 Implementation. Dr. Tarek A. Tutunji Philadelphia University, Jordan. Engineering Skills, Philadelphia University

3.6 Implementation. Dr. Tarek A. Tutunji Philadelphia University, Jordan. Engineering Skills, Philadelphia University 3.6 Implementation Philadelphia University, Jordan Preview In the previous sequence, Analysis and Design was discussed. In this sequence, Implementation will be presented. Seven Design Steps 1. Define

More information

High School PLTW Introduction to Engineering Design Curriculum

High School PLTW Introduction to Engineering Design Curriculum Grade 9th - 12th, 1 Credit Elective Course Prerequisites: Algebra 1A High School PLTW Introduction to Engineering Design Curriculum Course Description: Students use a problem-solving model to improve existing

More information

IED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.

IED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps. IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources

More information

ELG3336 Introduction to Engineering Design

ELG3336 Introduction to Engineering Design ELG3336 Introduction to Engineering Design Both the engineer and scientist are thoroughly educated in the mathematical and natural sciences, but the scientist primarily uses this knowledge to acquire new

More information

GCSE Design and Technology Specification - NEA Guidance

GCSE Design and Technology Specification - NEA Guidance GCSE Design and Technology 2017 Specification - NEA Guidance Non Examined Assessment NEA Non Examined Assessment 50% of the qualification. Approximately 35 hrs of candidate work. Design & Make task from

More information

Nagoya International School Parent Guide to Design

Nagoya International School Parent Guide to Design Nagoya International School Parent Guide to Design Design is the fundamental soul of a man-made creation that ends up expressing itself in successive outer layers of a product or service. Steve Jobs Design

More information

MECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET)

MECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET) Mechanical Engineering/Manufacturing Industrial Technology (MET) - Cuyahoga Community College 2018-2019 Catalog 1 MECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET) MET-1100 Technology Orientation

More information

GEARS-IDS Invention and Design System Educational Objectives and Standards

GEARS-IDS Invention and Design System Educational Objectives and Standards GEARS-IDS Invention and Design System Educational Objectives and Standards The GEARS-IDS Invention and Design System is a customizable science, math and engineering, education tool. This product engages

More information

Total Test Questions: 34 Levels: Units of Credit: 0.50

Total Test Questions: 34 Levels: Units of Credit: 0.50 DESCRIPTION The first in a sequence of courses that prepares individuals with a lab-based hands-on curriculum combining electrical, mechanical and engineering principals. Students will learn to design,

More information

PRODUCT DESIGN and DEVELOPMENT

PRODUCT DESIGN and DEVELOPMENT PRODUCT DESIGN and DEVELOPMENT Chapter 14: Prototyping Lecturer Tetuko Kurniawan Teaching source book: Chapter 14 of Product Design and Development Karl T. Ulrich & Steven D. Eppinger Outline Irobot PackBot

More information

THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN C H A P T E R O N E

THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN C H A P T E R O N E THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN C H A P T E R O N E OBJECTIVES 1. Describe the role of drawings in the design process. 2. Contrast concurrent versus traditional design processes. 3. List five

More information

West Windsor-Plainsboro Regional School District Architectural Design and Fabrication

West Windsor-Plainsboro Regional School District Architectural Design and Fabrication West Windsor-Plainsboro Regional School District Architectural Design and Fabrication Unit 1: Technical Drawings Content Area: Engineering Course & Grade Level: Architectural Design & Fabrication, 10-12

More information

1.8.3 Haptic-Based CAD 1.9 About this Book 1.10 Exercises References Development of Additive Manufacturing Technology

1.8.3 Haptic-Based CAD 1.9 About this Book 1.10 Exercises References Development of Additive Manufacturing Technology Contents 1 Introduction and Basic Principles 1 1.1 What Is Additive Manufacturing? 1 1.2 What Are AM Parts Used for? 3 1.3 The Generic AM Process 4 1.3.1 Step 1: CAD 4 1.3.2 Step 2: Conversion to STL 4

More information

Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials

Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials Eduardo Napadensky, Objet Geometries Ltd., Israel Current additive type manufacturing technologies such

More information

UNIT T15: RAPID PROTOTYPING TECHNOLOGIES. Technologies

UNIT T15: RAPID PROTOTYPING TECHNOLOGIES. Technologies Unit T15: Rapid Prototyping Technologies Unit code: R/503/7413 QCF level: 6 Credit value: 15 Aim This unit aims to develop learners understanding of rapid prototyping through the study of their evolution,

More information

Design technology Standard level Paper 1

Design technology Standard level Paper 1 Design technology Standard level Paper 1 Monday 14 November 2016 (morning) 45 minutes Instructions to candidates Do not open this examination paper until instructed to do so. Answer all the questions.

More information

Transportation. Inspiring aesthetics for your visions

Transportation. Inspiring aesthetics for your visions Transportation and Product Design Inspiring aesthetics for your visions Our Benchmark: The Human Being We develop, simulate, test and analyse for visions of the future. Our passion: Mobility and Sports.

More information

Design, Technology and Engineering

Design, Technology and Engineering BOARD-ACCREDITED, PRE-EDITED DRAFT Design, Technology and Engineering 2020 Subject Outline Stage 1 and Stage 2 This subject outline has been accredited. It is provided in draft, pre-edited form for planning

More information

FACULTY OF ENGINEERING

FACULTY OF ENGINEERING FACULTY OF List of s Offered for University of Malaya Student Exchange (UMSEP) for the 2015/2016 Academic Session BACHELOR OF MANUFACTURING & COMPUTER AIDED DESIGN s Offered No 1 KCEC1106 STATICS 2 KCEC1108

More information

Fundamentals of Graphics Communication, 3/e Gary R. Bertoline & Eric N. Wiebe

Fundamentals of Graphics Communication, 3/e Gary R. Bertoline & Eric N. Wiebe Fundamentals of Graphics Communication, 3/e Gary R. Bertoline & Eric N. Wiebe http://highered.mcgraw-hill.com/sites/0072322098/ CHAPTER 1 Introduction to Graphics Communication and Sketching Chapter 1

More information

Years 5 and 6 standard elaborations Australian Curriculum: Design and Technologies

Years 5 and 6 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

West Windsor-Plainsboro Regional School District Computer Programming Grade 8

West Windsor-Plainsboro Regional School District Computer Programming Grade 8 West Windsor-Plainsboro Regional School District Computer Programming Grade 8 Page 1 of 7 Unit 1: Programming Content Area: Technology Course & Grade Level: Computer Programming, Grade 8 Summary and Rationale

More information

Wood Working. Technology Diffusion Synthesize information, evaluate and make decisions about technologies.

Wood Working. Technology Diffusion Synthesize information, evaluate and make decisions about technologies. Wood Working 1A1 1.0.1 Nature of Technology Students develop an understanding of technology, its characteristics, scope, core concepts* and relationships between technologies and other fields. *The core

More information

8.1 Educational Technology A. Technology Operations and Concepts Pre-K

8.1 Educational Technology A. Technology Operations and Concepts Pre-K Warren Hills Cluster Schools 8 Technology Mastery Indicators Key: B = Beginning to explore concept/skill D = In process of developing the concept/skill M = Demonstrates concept/skill mastery M = Mastery

More information

GCSE Design and Technology Specification - NEA Guidance

GCSE Design and Technology Specification - NEA Guidance GCSE Design and Technology 2017 Specification - NEA Guidance Non Examined Assessment NEA Non Examined Assessment 50% of the qualification. Approximately 35 hrs of candidate work. Design & Make task from

More information

Course code Title Description Type

Course code Title Description Type 1st Semester 3М11OP01 3M21OM01 3M22OM01 3M23IND01 Mathematics for engineering Technical mechanics Materials and joining techniques Graphical communication 3M31IND01 Industrial design 1 Introduction to

More information

PowerAnchor STEM Curriculum mapping Year 10

PowerAnchor STEM Curriculum mapping Year 10 PowerAnchor STEM Curriculum mapping Year 10 *NOTE: Bullet points are ACARA provided elaborations for each outcome for this year level. Content Area Science Content Science Understanding Physical sciences:

More information

Years 9 and 10 standard elaborations Australian Curriculum: Design and Technologies

Years 9 and 10 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

Architectural CAD. Technology Diffusion Synthesize information, evaluate and make decisions about technologies.

Architectural CAD. Technology Diffusion Synthesize information, evaluate and make decisions about technologies. Architectural CAD 1A1 1.0.1 Nature of Technology Students develop an understanding of technology, its characteristics, scope, core concepts* and relationships between technologies and other fields. *The

More information

Engineering Technology (2010) Sample work program A. September 2010

Engineering Technology (2010) Sample work program A. September 2010 Engineering (2010) Sample work program A September 2010 Engineering (2010) Sample work program A Compiled by the Queensland Studies Authority September 2010 A work program is the school s plan of how the

More information

Theodore J. Branoff 1. Keywords: engineering design graphics, concurrent engineering design, linear design, LEGO projects, furniture projects.

Theodore J. Branoff 1. Keywords: engineering design graphics, concurrent engineering design, linear design, LEGO projects, furniture projects. Integrating Linear Design and Concurrent Engineering Design into Engineering Design Graphics Courses Through an Individual Furniture Design Project and a LEGO Group Project Theodore J. Branoff 1 Abstract

More information

BIG IDEAS. Personal design interests require the evaluation and refinement of skills. Learning Standards

BIG IDEAS. Personal design interests require the evaluation and refinement of skills. Learning Standards Ministry of Education Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Art Metal and Jewellery Grade 12 BIG IDEAS Products can be designed for life cycle. Personal design interests require the

More information

APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY

APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY JULY 2016 Contents Page number Introduction 1 Subject aims and objectives 2 Subject content 3 Core technical principles 3 Core designing and

More information

Home Tweet Home Engineering Portfolio. This portfolio belongs to:

Home Tweet Home Engineering Portfolio. This portfolio belongs to: Home Tweet Home Engineering Portfolio This portfolio belongs to: 1 Endangered Animals Graphic Organizer Complete the graphic organizer by recording answers to the questions below. You may add other interesting

More information

MANUFACTURING, INTRODUCTION (620)

MANUFACTURING, INTRODUCTION (620) DESCRIPTION Manufacturing Technology introduces students to the manufacturing industry. Students must demonstrate knowledge and skill about how manufactures use technology to change raw materials into

More information

Q1. Computers are an important part of product design and manufacture.

Q1. Computers are an important part of product design and manufacture. Q1. Computers are an important part of product design and manufacture. Describe how a designer might use a computer in the development of the product you have chosen. (Total 6 marks) Q2. Data transfer,

More information

STEM 4 Senior Design & Capstone Experience

STEM 4 Senior Design & Capstone Experience STEM 4 Senior Design and Capstone Experience 1 PUBLIC SCHOOLS OF EDISON TOWNSHIP DIVISION OF CURRICULUM AND INSTRUCTION STEM 4 Senior Design & Capstone Experience Length of Course: Elective/Required: Schools:

More information

Chapter 2: Introduction to Mechanical Engineering Design

Chapter 2: Introduction to Mechanical Engineering Design ENT 345 MECHANICAL COMPONENT DESIGN Chapter 2: Introduction to Mechanical Engineering Design IR. DR. KHAIRUL SALLEH BASARUDDIN School of Mechatronic Engineering Universiti Malaysia Perlis Email : khsalleh@unimap.edu.my

More information

IB DESIGN TECHNOLOGY SL: YEAR 2

IB DESIGN TECHNOLOGY SL: YEAR 2 FREEHOLD REGIONAL HIGH SCHOOL DISTRICT OFFICE OF CURRICULUM AND INSTRUCTION INTERNATIONAL BACCALAUREATE PROGRAM IB DESIGN TECHNOLOGY SL: YEAR 2 Grade Level: 12 Credits: 5 BOARD OF EDUCATION ADOPTION DATE:

More information

Stage 2 Design and Technology Communication Products Assessment Type 2: Product Major Product

Stage 2 Design and Technology Communication Products Assessment Type 2: Product Major Product Stage 2 Design and Technology Communication Products Assessment Type 2: Product Major Product Page 1 of 27 Page 2 of 27 Page 3 of 27 Producing Clear evidence of completion of product to a polished standard.

More information

Years 3 and 4 standard elaborations Australian Curriculum: Design and Technologies

Years 3 and 4 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

The REVERSE Engineering Design Process: Guided Practice Student Challenge Mini Engineering Notebook

The REVERSE Engineering Design Process: Guided Practice Student Challenge Mini Engineering Notebook Mini Engineering Notebook (Page 1 of 12) Team Member #1: Team Member #2: Team Member #3: Date: Class: Grade: /100pts The REVERSE Engineering Design Process: Guided Practice Student Challenge Mini Engineering

More information

2 of 11 Stage 2 Design and Technology Student Response

2 of 11 Stage 2 Design and Technology Student Response 1 of 11 Stage 2 Design and Technology Student Response 2 of 11 Stage 2 Design and Technology Student Response 3 of 11 Stage 2 Design and Technology Student Response 4 of 11 Stage 2 Design and Technology

More information

Design Analysis Process

Design Analysis Process Prototype Design Analysis Process Rapid Prototyping What is rapid prototyping? A process that generates physical objects directly from geometric data without traditional tools Rapid Prototyping What is

More information

Davison Community Schools ADVISORY CURRICULUM COUNCIL I/II 21MAR14

Davison Community Schools ADVISORY CURRICULUM COUNCIL I/II 21MAR14 Davison Community Schools ADVISORY CURRICULUM COUNCIL I/II 21MAR14 Introduction to Engineering (IED) Course Essential Questions (from Phase I report): 1. How does the design process promote the development

More information

PowerAnchor STEM Curriculum mapping Year 9

PowerAnchor STEM Curriculum mapping Year 9 PowerAnchor STEM Curriculum mapping Year 9 *NOTE: Bullet points are ACARA provided elaborations for each outcome for this year level. Content Area Science Content Science Understanding Physical sciences:

More information

UNDERSTANDINGS: Students will understand that

UNDERSTANDINGS: Students will understand that Curriculum Framework Computer Integrated Manufacturing Unit 2 Manufacturing Processes Lesson 2.3 Product Development ESTABLISHED GOALS It is expected that students will G1 Demonstrate an ability to identify,

More information

AQA GCSE Design and Technology 8552

AQA GCSE Design and Technology 8552 AQA GCSE Design and Technology 8552 Investigation, primary and secondary data Unit 6 Designing principles 1 Objectives Understand how primary and secondary data can be collected to assist the understanding

More information

Year 5 We are not amused!

Year 5 We are not amused! Year 5 We are not amused! Autumn Term National Curriculum Art Pupils should be taught: to create sketch books to record their observations and use them to review and revisit ideas to improve their mastery

More information

STAGE 2 DESIGN AND TECHNOLOGY COMMUNICATION PRODUCTS ASSESSMENT TYPE 1: SKILLS AND APPLICATIONS TASKS SPECIALISED SKILLS APPLICATION

STAGE 2 DESIGN AND TECHNOLOGY COMMUNICATION PRODUCTS ASSESSMENT TYPE 1: SKILLS AND APPLICATIONS TASKS SPECIALISED SKILLS APPLICATION STAGE 2 DESIGN AND TECHNOLOGY COMMUNICATION PRODUCTS ASSESSMENT TYPE 1: SKILLS AND APPLICATIONS TASKS SPECIALISED SKILLS APPLICATION All product names have been deleted from the task and student response.

More information

Introduction to Engineering Design. Part A

Introduction to Engineering Design. Part A Introduction to Engineering Design Final Examination Part A Spring 2008 Student Name: Date: Class Period: Total Points: /40 Converted Score: /50 Page 1 of 12 Part A - Multiple Choice Directions: This is

More information

Design and Technology

Design and Technology 2013 H I G H E R S C H O O L C E R T I F I C A T E E X A M I N A T I O N Design and Technology Total marks 40 Section I Pages 2 4 General Instructions Reading time 5 minutes Working time 1 1 hours 2 Write

More information

Acalanes Union High School District Adopted: 05/18/05 SUBJECT AREA CAREER/TECHNICAL EDUCATION

Acalanes Union High School District Adopted: 05/18/05 SUBJECT AREA CAREER/TECHNICAL EDUCATION Adopted: 05/18/05 SUBJECT AREA CAREER/TECHNICAL EDUCATION COURSE TITLE: ADVANCED DESIGN AND FABRICATION TECHNOLOGY II - IV CBEDS ASSIGNMENT CODE: 5601 COURSE CODE: T0855e, T0856e, T0857e GRADE LEVEL: 10-12

More information

2013 Product Design. Advanced Higher. Finalised Marking Instructions

2013 Product Design. Advanced Higher. Finalised Marking Instructions 013 Product Design Advanced Higher Finalised ing Instructions Scottish Qualifications Authority 013 The information in this publication may be reproduced to support SQA qualifications only on a non-commercial

More information

rapid casting development with simulation and QMC

rapid casting development with simulation and QMC 1 Rapid casting development by means of Qualified Master Casting (QMC) and numerical simulation modeling Dr. Joachim Gundlach Grunewald 2008 2 1. Grunewald 2. Rapid Prototyping techniques 3. casting development

More information

Design technology Standard level Paper 1

Design technology Standard level Paper 1 M17/4/DESTE/SPM/ENG/TZ0/XX Design technology Standard level Paper 1 Thursday 11 May 2017 (afternoon) 45 minutes Instructions to candidates Do not open this examination paper until instructed to do so.

More information

DFTG 1305 UNIT 1. Semester: Spring 2016 Class #: Term: SS Instructor: Mays ALSabbagh

DFTG 1305 UNIT 1. Semester: Spring 2016 Class #: Term: SS Instructor: Mays ALSabbagh DFTG 1305 UNIT 1 Semester: Spring 2016 Class #: 94412 Term: SS Instructor: Mays ALSabbagh Technical Drafting Unit One: Introduction to Drafting Chapter 1 : The World Wide Graphic language for Design Lecture

More information

Technology Engineering and Design Education

Technology Engineering and Design Education Technology Engineering and Design Education Grade: Grade 6-8 Course: Technological Systems NCCTE.TE02 - Technological Systems NCCTE.TE02.01.00 - Technological Systems: How They Work NCCTE.TE02.02.00 -

More information

The student will understand ethical behavior and be able to demonstrate sound understanding of technological concepts.

The student will understand ethical behavior and be able to demonstrate sound understanding of technological concepts. Topic: Orientation Included Standards: ISTE Standards 5 a,b,c; 6 a, b In addition to, in-depth inferences and applications that go beyond what was The student will understand ethical behavior and be able

More information

MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES

MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES Visual Communications ENG_4_542 Tuesday and Wednesday 2pm 4pm (Tues), 9.30am 11.30am (Weds) Students attend both sessions. The module aims a) to develop the capacities of observation and visualisation,

More information

N07/4/DESTE/SPM/ENG/TZ0/XX DESIGN TECHNOLOGY. Wednesday 14 November 2007 (afternoon) 45 minutes INSTRUCTIONS TO CANDIDATES

N07/4/DESTE/SPM/ENG/TZ0/XX DESIGN TECHNOLOGY. Wednesday 14 November 2007 (afternoon) 45 minutes INSTRUCTIONS TO CANDIDATES IB DESIGN TECHNOLOGY standard level Paper 1 DIPLOMA PROGRAMME PROGRAMME DU DIPLÔME DU BI PROGRAMA DEL DIPLOMA DEL BI N07/4/DESTE/SPM/ENG/TZ0/XX 88076204 Wednesday 14 November 2007 (afternoon) 45 minutes

More information

Design and Technology

Design and Technology 2005 HIGHER SCHOOL CERTIFICATE EXAMINATION Design and Technology Total marks 40 General Instructions Reading time 5 minutes Working time 1 1 2 hours Write using black or blue pen Write your Centre Number

More information

Study Skills Course Milestones for Students

Study Skills Course Milestones for Students Study Skills Course Milestones for Students Course Title: Design & Manufacture Level: National 5 Work to be covered/topics/activities/assignments Month Unit 1 Design Unit 2 Materials & Manufacturing Unit

More information

A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication.

A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication. Rapid Tooling Opens New Diecasting Doors Think diecasting tooling will ruin your lead times? Think again. North American Die Casting Association, Wheeling, Illinois Manufacturers seeking a competitive

More information

Plywood Desk Organiser Year 10 Term Assessment Task

Plywood Desk Organiser Year 10 Term Assessment Task Plywood Desk Organiser Year 10 Term 1-2018 Assessment Task Length: 11 Weeks Marks / value: 10D&T - 15% Date due: Design process folio - Week 11, Term 1-2018 Plywood Desk Organiser - Week 11, Term 1-2018

More information

Stage 2. Content OUTCOMES SKILLS. Attitudes (VA) Values & Working Scientifically (WS)

Stage 2. Content OUTCOMES SKILLS. Attitudes (VA) Values & Working Scientifically (WS) SKILLS Working Scientifically (WS) OUTCOMES Values & Attitudes (VA) Stage 2 shows interest in and enthusiasm for science and technology, responding to their curiosity, questions and perceived needs, wants

More information

THE IMPORTANCE OF PLANNING AND DRAWING IN DESIGN

THE IMPORTANCE OF PLANNING AND DRAWING IN DESIGN PROGRAM OF STUDY ENGR.ROB Standard 1 Essential UNDERSTAND THE IMPORTANCE OF PLANNING AND DRAWING IN DESIGN The student will understand and implement the use of hand sketches and computer-aided drawing

More information

PARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II

PARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II PARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II APPROVED BY THE BOARD OF EDUCATION Developed: August 1990 Revised: August 2007 September 2009 October 2012 January

More information

Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Engineering Grade 11 BIG IDEAS

Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Engineering Grade 11 BIG IDEAS Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Engineering Grade 11 BIG IDEAS Design for the life cycle includes consideration of social and environmental impacts. Personal design interests

More information

More Info at Open Access Database by S. Dutta and T. Schmidt

More Info at Open Access Database  by S. Dutta and T. Schmidt More Info at Open Access Database www.ndt.net/?id=17657 New concept for higher Robot position accuracy during thermography measurement to be implemented with the existing prototype automated thermography

More information

Implementing BIM for infrastructure: a guide to the essential steps

Implementing BIM for infrastructure: a guide to the essential steps Implementing BIM for infrastructure: a guide to the essential steps See how your processes and approach to projects change as you adopt BIM 1 Executive summary As an ever higher percentage of infrastructure

More information

CLANCY CATHOLIC COLLEGE TAS Year 8 - Rotation 1: Mixed Materials (Gumball)

CLANCY CATHOLIC COLLEGE TAS Year 8 - Rotation 1: Mixed Materials (Gumball) CLANCY CATHOLIC COLLEGE TAS- 2014 Year 8 - Rotation 1: Mixed Materials (Gumball) Handed Out: Term 1 Week 3 (Circle) 10/2/14 11/2/14 12/2/14 13/2/14 14/2/14 Period: Term 2 Week 2 (Circle) 5/5/14 6/5/14

More information

Content Map For Career & Technology

Content Map For Career & Technology Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design

More information

MECH 4860 (Senior Project Design) Meeting Minutes

MECH 4860 (Senior Project Design) Meeting Minutes Date: September 9 th, 2014 Attendance: David, Allison, Yapah, Persaud, Jeffrey, Josel De la Cruz and Ronald We all reviewed the parts necessary to running a successful meeting. o Meeting leader, note taker,

More information

STEM: Electronics Curriculum Map & Standards

STEM: Electronics Curriculum Map & Standards STEM: Electronics Curriculum Map & Standards Time: 45 Days Lesson 6.1 What is Electricity? (16 days) Concepts 1. As engineers design electrical systems, they must understand a material s tendency toward

More information

#printsbeyondpaper. Id- Website- Follow us on. Contact

#printsbeyondpaper.  Id- Website-   Follow us on. Contact #printsbeyondpaper Email Id- prints@3dwalla.com Contact - 9833933953 Website- www.3dwalla.com Follow us on About Us 3Dwalla is an innovative 3D printing service 3Dwalla is an innovative 3D print service

More information

Machine Elements & Mechanisms. Course Outcomes. Course Description. An applications course Uses a wide range of your background courses:

Machine Elements & Mechanisms. Course Outcomes. Course Description. An applications course Uses a wide range of your background courses: Machine Elements & Mechanisms An applications course Uses a wide range of your background courses: Statics & Dynamics Strength of Materials Materials and Processes Manufacturing Processes Fluid Mechanics

More information

Teaching Manufacturing Using The Golden Key Reverse Engineering

Teaching Manufacturing Using The Golden Key Reverse Engineering à Teaching Manufacturing Using The Golden Key Reverse Engineering Session 3263 Harry L. Hess The College of New Jersey I. Introduction The United States will be able to continue its unprecedented economic

More information

K.1 Structure and Function: The natural world includes living and non-living things.

K.1 Structure and Function: The natural world includes living and non-living things. Standards By Design: Kindergarten, First Grade, Second Grade, Third Grade, Fourth Grade, Fifth Grade, Sixth Grade, Seventh Grade, Eighth Grade and High School for Science Science Kindergarten Kindergarten

More information

Classification of Metal Removal Processes and Machine tools. Introduction to Manufacturing and Machining

Classification of Metal Removal Processes and Machine tools. Introduction to Manufacturing and Machining Classification of Metal Removal Processes and Machine tools Introduction to Manufacturing and Machining Production Engineering covers two domains: (a) Production or Manufacturing Processes (b) Production

More information

Character Evolution Sculpture

Character Evolution Sculpture Character Evolution Sculpture Name: Character: the aggregate of features and traits that form the individual nature of some person or thing; representing a personality type, especially by emphasizing distinctive

More information

TECHNOLOGY AND ENGINEERING EDUCATION

TECHNOLOGY AND ENGINEERING EDUCATION TECHNOLOGY AND ENGINEERING EDUCATION Brian Giovanini, Department Chairperson - MVHS Lisa Traut, Department Chairperson - NVHS Andrea Hendrickson, Department Chairperson - WVHS The Technology & Engineering

More information

BIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN

BIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN OSMANIA UNIVERSITY, HYDERABAD - 7 M. E. (BME) (Main) Examination, September 2013 EXAMINATION TIME TABLE Time : 2.00 PM to 5.00 PM Department of BME Date & Day BIOMEDICAL ELECTRONICS II - SEMESTER ADVANCED

More information

Graphics (2013) Sample work program. March 2013

Graphics (2013) Sample work program. March 2013 Graphics (2013) Sample work program March 2013 Graphics (2013) Sample work program Compiled by the Queensl Studies Authority March 2013 A work program is the school s plan of a course of study based on

More information

Hydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete

Hydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete Date and Day Pre stressed UNIVERSITY COLLEGE OF ENGINEERING (Autonomous) OSMANIA UNIVERSITY M. E. (Civil) ( & ) and IV-Semester () Main Examination September 2012 EXAMINATION TIME TABLE Structural Prestressed

More information

User's Guide to. Rapid Prototyping. Todd Grimm. Society of Manufacturing Engineers. Association of SME. Dearborn, Michigan

User's Guide to. Rapid Prototyping. Todd Grimm. Society of Manufacturing Engineers. Association of SME. Dearborn, Michigan User's Guide to Rapid Prototyping Todd Grimm Society of Manufacturing Engineers Rapid Prototyping Association of SME Dearborn, Michigan Copyright 2004 Society of Manufacturing Engineers 987654321 All rights

More information

CHAPTER 1 DESIGN AND GRAPHIC COMMUNICATION

CHAPTER 1 DESIGN AND GRAPHIC COMMUNICATION CHAPTER 1 DESIGN AND GRAPHIC COMMUNICATION Introduction OVERVIEW A new machine structure or system must exist in the mind of the engineer or designer before it can become a reality. The design process

More information

Robotic Polishing of Streamline Co-Extrusion Die: A Case Study

Robotic Polishing of Streamline Co-Extrusion Die: A Case Study Proceedings of the 2017 International Conference on Industrial Engineering and Operations Management (IEOM) Bristol, UK, July 24-25, 2017 Robotic Polishing of Streamline Co-Extrusion Die: A Case Study

More information

Computer Aided Design and Engineering (CAD)

Computer Aided Design and Engineering (CAD) Oakland Community College 2017-2018 Catalog 1 Computer Aided Design and Engineering (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well

More information