ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A
|
|
- Elmer Eaton
- 5 years ago
- Views:
Transcription
1 FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Compliant to RoHS directive /95/EC Designed and qualified for industrial level PRODUCT SUMMARY I T(A) or I F(A) ADD-A-PAK MECHANICAL DESCRIPTION 7 A The ADD-A-PAK Generation II, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. BENEFITS Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate Up to 6 High surge capability Easy mounting on heatsink ELECTRICAL DESCRIPTION These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS ALUES UNITS I T(A) or I F(A) 85 C 7 I O(RMS) As AC switch 6 I TSM, 5 Hz 4 I FSM 6 Hz 4 5 Hz 8 I t 6 Hz 7 ka s I t 8 ka s RRM Range 4 to 6 T Stg - 4 to 5 C T J A Document Number: 9469 For technical questions within your region, please contact one of the following: Revision: 7-May- DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
2 ELECTRICAL SPECIFICATIONS OLTAGE RATINGS TYPE NUMBER SK.6 OLTAGE CODE RRM, MAXIMUM REPETITIE PEAK REERSE OLTAGE RSM, MAXIMUM NON-REPETITIE PEAK REERSE OLTAGE DRM, MAXIMUM REPETITIE PEAK OFF-STATE OLTAGE, GATE OPEN CIRCUIT I RRM, I DRM AT 5 C ma 5 ON-STATE CONDUCTION PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum average on-state current (thyristors) I T(A) 8 conduction, half sine wave, Maximum average forward current (diodes) T C = 85 C 7 Maximum continuous RMS on-state current, as AC switch Maximum peak, one-cycle non-repetitive on-state or forward current Notes () I t for time t x = I t x t x () Average power = T(TO) x I T(A) r t x (I T(RMS) ) () 6.7 % x π x I A < I < π x I A (4) I > π x I A I F(A) I O(RMS) or 6 I TSM or I FSM t = ms No voltage 4 t = 8. ms reapplied Sinusoidal 4 half wave, t = ms % RRM initial T J = T J maximum 5 t = 8. ms reapplied 5 t = ms No voltage 8 t = 8. ms reapplied 7 Maximum I t for fusing I t Initial T J = T J maximum A s t = ms % RRM 56 t = 8. ms reapplied 5 Maximum I t for fusing I t () t =. ms to ms, no voltage reapplied 8 A T J = T J maximum s Low level ().86 Maximum value or threshold voltage () T(TO) T J = T J maximum High level (4).9 Maximum value of on-state slope resistance Low level () 9.58 r () t T J = T J maximum High level (4) 7. TM I TM = π x I T(A) Maximum peak on-state or forward voltage T J = 5 C.65 FM I FM = π x I F(A) Maximum non-repetitive rate of rise of T J = 5 C, from.67 DRM, di/dt 5 A/μs turned on current I TM = π x I T(A), I g = 5 ma, t r <.5 μs, t p > 6 μs T J = 5 C, anode supply = 6, Maximum holding current I H resistive load, gate open circuit ma Maximum latching current I L T J = 5 C, anode supply = 6, resistive load 4 I (RMS) I (RMS) A mω For technical questions within your region, please contact one of the following: Document Number: 9469 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 7-May-
3 TRIGGERING PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum peak gate power P GM Maximum average gate power P G(A).5 W Maximum peak gate current I GM.5 A Maximum peak negative gate voltage - GM Maximum gate voltage required to trigger GT T J = 5 C Anode supply = 6 resistive load.5 T J = - 4 C 4. T J = 5 C.7 T J = 5 C Anode supply = 6 resistive load 5 ma T J = - 4 C 7 T J = 5 C 8 Maximum gate voltage that will not trigger GD T J = 5 C, rated DRM applied.5 Maximum gate current that will not trigger I GD T J = 5 C, rated DRM applied 6 ma BLOCKING PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum peak reverse and off-state leakage current at RRM, DRM I RRM, I DRM T J = 5 C, gate open circuit 5 ma Maximum RMS insulation voltage INS 5 Hz ( min) 6 ( s) Maximum critical rate of rise of off-state voltage d/dt T J = 5 C, linear to.67 DRM /μs THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Junction operating and storage temperature range T J, T Stg - 4 to 5 C Maximum internal thermal resistance, junction to case per leg R thjc DC operation.76 Typical thermal resistance, case to heatsink per module R thcs Mounting surface flat, smooth and greased. C/W Mounting torque ± % to heatsink A mounting compound is recommended and the 4 torque should be rechecked after a period of busbar hours to allow for the spread of the compound. Approximate weight 75 g.7 oz. Case style JEDEC TO-4AA compatible Nm ΔR CONDUCTION PER JUNCTION SINE HALF WAE CONDUCTION RECTANGULAR WAE CONDUCTION DEICES UNITS SK C/W Note Table shows the increment of thermal resistance R thjc when devices operate at different conduction angles than DC Document Number: 9469 For technical questions within your region, please contact one of the following: Revision: 7-May- DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
4 Maximum allowable case temperature ( C) RthJC (DC) =.76 C/W Maximum average on-state power loss (W) RMS limit DC Per leg, Tj = 5 C 4 5 Average on-state current (A) Average on-state current (A) Fig. - Current Ratings Characteristics Fig. 4 - On-State Power Loss Characteristics Maximum allowable case temperature ( C) RthJC (DC) =.76 C/W DC Average on-state current (A) Fig. - Current Ratings Characteristics Peak half sine wave on-state current (A) At any rated load condition and with rated rrm applied following surge Initial Tj = Tj 6 Hz.8 5 Hz.s Per leg 5 Number of equal amplitude half cycle current pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Maximum average on-state power loss (W) RMS limit Per leg, Tj = 5 C Average on-state current (A) Fig. - On-State Power Loss Characteristics Peak half sine wave on-state current (A) Maximum Non-repetitive Surge Current. Control of conduction may not be maintained. ersus Pulse Train Duration Initial Tj = 5 C No oltage Reapplied Rated rrm reapplied Per leg 5.. Pulse train duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions within your region, please contact one of the following: Document Number: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 7-May-
5 Maximum total on-state power loss (W) SK.6 Series Per module Tj = 5 C RthSA =. C/W. C/W.5 C/W.7 C/W C/W.5 C/W C/W C/W 4 C/W 8 C/W Total RMS output current (A) Maximum allowable ambient temperature ( C) Fig. 7 - On-State Power Loss Characteristics Maximum total power loss (W) (sine) 8 (rect) x SK.6 Series single phase bridge connected Tj = 5 C Total output current (A) Fig. 8 - On-State Power Loss Characteristics RthSA =. C/W. C/W.5 C/W.7 C/W C/W.5 C/W C/W 8 C/W Maximum allowable ambient temperature ( C) Maximum total power loss (W) (rect) x SK.6 Series three phase bridge connected Tj = 5 C Total output current (A) Fig. 9 - On-State Power Loss Characteristics RthSA =. C/W. C/W.4 C/W.5 C/W.7 C/W C/W.5 C/W C/W Maximum allowable ambient temperature ( C) Document Number: 9469 For technical questions within your region, please contact one of the following: Revision: 7-May- DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 5
6 Instantaneous on-state current (A) Per leg Tj = 5 C Tj = 5 C Instantaneous on-state voltage () Fig. - On-State oltage Drop Characteristics Transient thermal impedance Z thjc ( C/W). Steady state value RthJC =.76 C/W (DC operation) Per leg.... Square wave pulse duration (s) Fig. - Thermal Impedance Z thjc Characteristics Instantaneous gate voltage () Rectangular gate pulse a)recommended load line for rated di/dt:, ohms tr =.5 µs, tp >= 6 µs b)recommended load line for <= % rated di/dt:, 65 ohms tr = µs, tp >= 6 µs (a) (b) TJ = 5 C TJ = 5 C TJ = -4 C () PGM = W, tp = 5 µs () PGM = 5 W, tp = ms () PGM = W, tp = 5 ms (4) PGM = W, tp = 5 ms (4) () () () GD IGD IRK.6.. SK. Series Frequency Limited by PG(A).... Instantaneous gate current (A) Fig. - Gate Characteristics For technical questions within your region, please contact one of the following: Document Number: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 7-May-
7 ORDERING INFORMATION TABLE SKT6.., SKH6.., SKL6.., SKN6.. Series Device code SK T 6 / Module type - Circuit configuration (see end of datasheet) - Current code (7 A) 4 - oltage code (see oltage Ratings table) Note To order the optional hardware go to CIRCUIT CONFIGURATION SKT () ~ SKH () ~ SKL () ~ SKN () - () () () () G (4) K (5) - () K (7) G (6) () G K (4) (5) () K G (7) (6) 4 5 () G K (4) (5) Dimensions LINKS TO RELATED DOCUMENTS Document Number: 9469 For technical questions within your region, please contact one of the following: Revision: 7-May- DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 7
8 ADD-A-PAK Generation II - Thyristor Outline Dimensions DIMENSIONS in millimeters (inches) Fast-on tab.8 x.8 (. x.) 5 REF. ±.5 (.8 ±.) 9 ±.5 ( ±.) iti M5 x.8 Screws M5 x.8 8 (.7) REF. 5.5 ±.5 (.6 ±.) 6.7 ±. (.6 ±.) 4 ±.5 ( ±.) ± (.8 ±.9) 8 ±. (.5 ±.).6 ±. (.89 ±.8) 6. ±. (.48 ±.8) ±.5 (.59 ±.) ±.5 (.79 ±.) ±.5 (.79 ±.) 9 ±.75 (.6 ±.) 5.8 ±.5 (.8 ±.) 4 ±. (.57 ±.8) Document Number: 9568 For technical questions, contact: indmodules@vishay.com Revision: -Nov-8
9 Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold ishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that ishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy ishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive /65/EU of The European Parliament and of the Council of June 8, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some ishay documentation may still make reference to RoHS Directive /95/EC. We confirm that all the products identified as being compliant to Directive /95/EC conform to Directive /65/EU. Revision: -Mar- Document Number: 9
ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A
ADD-A-PAK Generation II Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/6 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified
More informationVS-VSKT91.., VS-VSKH91.., VS-VSKL91.., VS-VSKN91.. Series
AAP Gen 7 (TO-4AA) Power Modules Thyristor/Diode and Thyristor/Thyristor, 95 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified for
More informationAAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 105 A
AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 05 A FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Designed and qualified for industrial level
More informationThree Phase AC Switch (Power Modules), 50 A to 100 A
54-94-4MT..KPbF Series Three Phase AC Switch (Power Modules), 5 A to A MTK PRODUCT SUMMARY I O RRM Package Circuit 5 A to A 8 to 6 MT-K Three phase AC switch FEATURES Package fully compatible with the
More informationThyristor/Thyristor, 150 A (INT-A-PAK Power Module)
S-/4PbF Thyristor/Thyristor, 5 A (INT-A-PAK Power Module) INT-A-PAK PRIMARY CHARACTERISTICS I T(A) 5 A Type Modules - thyristor, standard Package INT-A-PAK FEATURES Electrically isolated by DBC ceramic
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) Type ADD-A-PAK A Modules - Diode, High Voltage MECHANICAL DESCRIPTION
More informationThyristor/Thyristor (MAGN-A-PAK Power Modules), 320 A
Thyristor/Thyristor (MAGN-A-PAK Power Modules), 32 A MAGN-A-PAK PRIMARY CHARACTERISTICS I T(A) 32 A Type Modules - thyristor, standard Package MAGN-A-PAK FEATURES High voltage Electrically isolated base
More informationPhase Control SCR, 70 A
Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) A Type Modules - Diode, High Voltage Package ADD-A-PAK Gen 7 Circuit ADD-A-PAK Two
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationPhase Control Thyristors (Stud Version), 110 A
Phase Control Thyristors (Stud Version), 110 A TO-209AC (TO-94) PRODUCT SUMMARY I T(AV) 110 A V DRM /V RRM 400 V, 1600 V V TM 1.52 V I GT 150 ma T J -40 C to 140 C Package TO-209AC (TO-94) Diode variation
More informationPhase Control Thyristors (Stud Version), 200 A
TO209AB (TO93) ST180SPbF Series FEATURES Center amplifying gate International standard case TO209AB (TO93) Hermetic metal case with ceramic insulator (Also available with glassmetal seal up to 1200 ) RoHS
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series High Voltage Phase Control Thyristor, 70 A
High Voltage Phase Control Thyristor, 70 A Super TO-247 PRODUCT SUMMARY 2 (A) 1 (K) (G) 3 Package Super TO-247 Diode variation Single SCR I T(AV) 70 A V DRM /V RRM 1200 V, 1600 V V TM 1.4 V I GT 100 ma
More informationThree Phase Bridge, 130 A to 160 A (Power Modules)
Three Phase Bridge, 3 A to 6 A (Power Modules) VS-3-6MT..KPbF Series PRODUCT SUMMARY I O V RRM Package Circuit MTK 3 A to 6 A 8 V to 6 V MT-K Three phase bridge FEATURES Package fully compatible with the
More informationPower Rectifier Diodes (T-Modules), 40 A to 110 A
THF..., THF..., T85HF..., T1HF... Series (T-Modules), A to 1 A FEATURES Electrically isolated base plate D-55 Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-50TPS2L-M3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, 50 A 2 3 TO-247AD 3L PRIMARY CHARACTERISTICS 2 (A) (K) (G) 3 I T(A) 50 A DRM / RRM 200 TM (typ.). I GT (typ.) 40 ma T J -40 C
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-TPS2LHM3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, A 2 (A) FEATURES AEC-Q qualified, meets JESD 20 class A whisker test Flexible solution for reliable AC power rectification 2 3
More informationThyristor High Voltage, Phase Control SCR, 40 A
S-40TPS2LHM3, S-40TPS2ALHM3 Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) Low I GT parts available AEC-Q0 qualified meets JESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible
More informationThyristor High Voltage, Phase Control SCR, 40 A
Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) AEC-Q0 qualified meets ESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible solution for reliable AC power rectification Easy control
More informationPower Modules, Passivated Assembled Circuit Elements, 25 A
Power Modules, Passivated Assembled Circuit Elements, 25 A VS-P Series FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS
More informationThyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A
VS- Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A FEATURES High current capability High surge capability Industrial standard package 3000 V RMS isolating voltage with non-toxic substrate Designed
More informationThree Phase Bridge, 300 A (Power Modules)
MTC Three Phase Bridge, 300 A (Power Modules) S-300MT...C Series FEATURES Blocking voltage up to 1800 High surge capability High thermal conductivity package, electrically insulated case Excellent power
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationThree Phase Bridge, 160 A (Power Modules)
MTC Three Phase Bridge, 160 A (Power Modules) S-160MT...C Series ishay Semiconductors FEATURES Blocking voltage up to 1 High surge capability High thermal conductivity package, electrically insulated case
More informationThree Phase Bridge (Power Module), 45 A to 100 A
40MT1.0P.PbF, 0MT1.0P.PbF, MT1.0P.PbF Series Three Phase Bridge (Power Module), 45 A to A FEATURES Vishay High Power Products MT...PA PRODUCT SUMMARY I O MT...PB 45 A to A Low V F Low profile package Direct
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationPower Modules, Passivated Assembled Circuit Elements, 40 A
Power Modules, Passivated Assembled Circuit Elements, 4 A FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS I O 4 A Type
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A
More informationStandard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available Types up to 400 V V RRM Designed and qualified for industrial
More informationSingle Phase Bridge (Power Modules), 25/35 A
MB Series MB Single Phase Bridge FEATURES Universal, 3 way terminals: Push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume
More informationThyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAK TM Power Modules), 500 A
Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor FEATURES High current capability High surge capability Industrial standard package 3 V RMS isolating voltage with non-toxic substrate
More informationPhase Control Thyristors (Stud Version), 300 A
Phase Control Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A 400 V, 800 V, 1200 V, 1600 V, V DRM /V RRM 1800 V, 2000 V V TM 1.28 V I GT 200 ma T J -40 C to +125
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-63 FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E3359 approved
More informationPhase Control Thyristors (Stud Version), 110 A
VS-RKI...PbF, VS-RKI...PbF Series Phase Control Thyristors (Stud Version), A TO-94 (TO-29AC) PRIMARY CHARACTERISTICS I T(AV) A V DRM /V RRM 4 V, 8 V, 2 V V TM.57 V I GT 8 ma T J -4 C to +4 C Package TO-94
More informationStandard Recovery Diodes (Stud Version), 300 A
Standard Recovery Diodes (Stud Version), 300 A DO-205AB (DO-9) PRODUCT SUMMARY I F(AV) 300 A Package DO-205AB (DO-9) Circuit configuration Single diode FEATURES Alloy diode Popular series for rough service
More informationMedium Power Phase Control Thyristors (Stud Version), 16 A
Medium Power Phase Control Thyristors (Stud Version), 16 A VS- PRODUCT SUMMARY TO-208AA (TO-48) Package TO-208AA (TO-48) Diode variation Single SCR I T(AV) 16 A 0 V, 200 V, 400 V, 600 V, 800 V, V DRM /V
More informationThree Phase Bridge (Power Modules), 25 A to 35 A
Three Phase Bridge (Power Modules), 25 A to 35 A D-63 PRODUCT SUMMARY I O 25 A to 35 A V RRM V to 6 V Package D-63 Circuit Three phase bridge FEATURES Universal, 3 way terminals: push-on, wrap around or
More informationStandard Recovery Diodes (Stud Version), 70 A
Standard Recovery Diodes (Stud Version), 70 A VS- FEATURES High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available DO-203AB
More informationMedium Power Silicon Rectifier Diodes, (Stud Version), 12 A
S-1N1...A, S-1N36..A Series Medium Power Silicon Rectifier Diodes, (Stud ersion), 1 A DO-4 (DO-3AA) PRIMARY CHARACTERISTICS I F(A) 1 A Package DO-4 (DO-3AA) Circuit configuration Single FEATURES oltage
More informationThree Phase Bridge (Power Modules), 90/110 A
9-MT.KPbF Series MTK Three Phase Bridge (Power Modules), 9/ A FEATURES Package fully compatible with the industry standard INT-A-PAK power modules series High thermal conductivity package, electrically
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Alloy diode High current carrying capability
More informationThree phase bridge. (Power Module), 200 A
Three Phase Bridge (Power Module), 2 A VS-2MT4KPbF MTK PRIMARY CHARACTERISTICS I O 2 A V RRM 4 V Package MTK Circuit configuration Three phase bridge FEATURES Package fully compatible with the industry
More informationHigh Voltage, Input Rectifier Diode, 10 A
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series High Voltage, Input Rectifier Diode, A TO-22 FULL-PAK PRODUCT SUMMARY Base cathode 3 Cathode Anode Package TO-22FP I F(AV) A V R 8 V to 2 V V F at I F. V I FSM
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series Thyristor High Voltage, Phase Control SCR, 70 A
Thyristor High Voltage, Phase Control SCR, 70 A 2 (A) FEATURES High surge capability High voltage input rectification 2 Designed and qualified according to JEDEC -JESD47 3 Super TO-247 (K) (G) 3 Material
More informationPower Rectifier Diodes (T-Modules), 2200 V, 20 A
Power Rectifier Diodes (T-Modules), 2200 V, 20 A FEATURES Electrically isolated base plate 2200 V RRM Industrial standard packaging UL approved file E78996 Simplified mechanical designs, rapid assembly
More informationStandard Recovery Diodes (Stud Version), 12 A
Standard Recovery Diodes (Stud Version), 12 A VS- FEATURES High surge current capability Stud cathode and stud anode version Wide current range DO-203AA (DO-4) Types up to 1200 V V RRM Designed and qualified
More informationSCR/SCR and SCR/Diode (MAGN-A-PAK TM Power Modules), 230 A
SCR/SCR and SCR/Diode (MAGNAPAK TM Power Modules), 230 A VSK.230..PbF Series FEATURES High voltage Electrically isolated base plate 3500 V RMS isolating voltage Industrial standard package Simplified mechanical
More informationStandard Recovery Diodes, 400 A
VS-VSMD4AW6, VS-VSMD4CW6 Standard Recovery Diodes, 4 A PRIMARY CHARACTERISTICS I F(AV) per module 4 A Type Modules - diode, high voltage Package TO-244 Circuit configuration TO-244 Two diodes common anode,
More informationStandard Diodes (Super MAGN-A-PAK Power Modules), 600 A
Standard Diodes (Super MAGN-A-PAK Power Modules), 6 A FEATURES High current capability High surge capability High voltage ratings up to 2 V 3 V RMS isolating voltage with non-toxic substrate Industrial
More informationPhase Control Thyristors (Stud Version), 330 A
Phase Control Thyristors (Stud Version), 330 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 330 A 400 V, 800 V, 1200 V, 1400 V, V DRM /V RRM 1600 V, 2000 V V TM 1.52 V I GT 200 ma T J -40 C to +125
More informationSCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A
VSVSK.23..PbF Series SCR / SCR and SCR / Diode (MAGNAPAK Power Modules), 23 A PRODUCT SUMMARY I T(AV) 23 A Type Modules thyristor, standard Package MAGNAPAK Circuit configuration MAGNAPAK Two SCRs doubler
More informationSurface Mountable Phase Control SCR, 16 A
D 2 PAK PRODUCT SUMMARY V T at 16 A I TSM V RRM Anode 2 1 3 Cathode Gate < 1.25 V 300 A 800 V to 1600 V FEATURES Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Compliant to RoHS directive 2002/95/EC
More informationSCR/SCR and SCR/Diode (MAGN-A-PAK Power Modules), 170 A, 250 A
SCR/SCR and SCR/Diode (MAGNAPAK Power Modules), 17 A, 25 A MAGNAPAK PRIMARY CHARACTERISTICS I T(AV) 17 A, 25 A Type Modules thyristor, standard Package MAGNAPAK FEATURES High voltage Electrically isolated
More informationInverter Grade Thyristors (Stud Version), 85 A
Inverter Grade Thyristors (Stud Version), 85 A TO-94 (TO-209AC) PRIMARY CHARACTERISTICS Package TO-94 (TO-209AC) Circuit configuration Single SCR I T(AV) 85 A V DRM /V RRM 400 V, 0 V, 0 V, 0 V V TM 2.15
More informationPhase Control Thyristors (Hockey PUK Version), 1350 A
Phase Control Thyristors (Hockey PUK Version), 1350 A FEATURES Center amplifying gate Metal case with ceramic insulator International standard case B-PUK (TO-200AC) Designed and qualified for industrial
More informationStandard Recovery Diodes (Stud Version), 400 A
Standard Recovery Diodes (Stud Version), 400 A DO-205AB (DO-9) FEATURES Wide current range High surge current capabilities Stud cathode and stud anode version Standard JEDEC types Designed and qualified
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationPhase Control Thyristors (Hockey PUK Version), 1745 A
Phase Control Thyristors (Hockey PUK Version), 1745 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Designed and
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationPhase Control Thyristor RMS SCRs, 25 A, 35 A
VS-N681, VS-N Series Phase Control Thyristor RMS SCRs, A, 3 A TO-8 (TO-8AA) V DRM /V RRM PRIMARY CHARACTERISTICS I T(AV) 16 A, A I T(RMS) A, 3 A 3 V, V, V, 6 V, 7 V, 8 V, V, V, 1 V, 1 V, V, V, 1 V 1 V
More informationSchottky Rectifier, 1.0 A
VS-BQ040PbF Schottky Rectifier, 1.0 A SMB Cathode Anode FEATURES Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Diffused diode High voltage ratings up to
More informationStandard Recovery Diodes, (Stud Version), 200 A
VS- Standard Recovery Diodes, (Stud Version), 200 A DO-30 (DO-205AC) PRIMARY CHARACTERISTICS I F(AV) 200 A Package DO-30 (DO-205AC) Circuit configuration Single FEATURES Wide current range High voltage
More informationAAP Gen 7 (TO-240AA) Power Modules Schottky Rectifier, 200 A
AAP Gen 7 (TO-24AA) Power Modules Schottky Rectifier, 2 A AAP Gen 7 (TO-24AA) PRIMARY CHARACTERISTICS I F(AV) 2 A V R 5 V Package AAP Gen 7 (TO-24AA) Circuit configuration Two diodes doubler circuit MECHANICAL
More informationFast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities Standard JEDEC types Stud cathode
More informationSingle phase bridge. (Power Modules), 25 A/35 A
Single Phase Bridge (Power Modules), 25 A/35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 1 V to 1600 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationPhase Control Thyristors (Hockey-PUK Version), 2310 A
Phase Control Thyristors (Hockey-PUK Version), 2310 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Material categorization:
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A VS- Series PRODUCT SUMMARY I O V RRM Package Circuit 1.9 A 1 V to 1 V Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard 2.54
More informationStandard Recovery Diodes, (Stud Version), 400 A
Standard Recovery Diodes, (Stud Version), 400 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 400 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationSingle phase bridge. (Power Modules), 25 A / 35 A
Single Phase Bridge (Power Modules), 25 A / 35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 200 V to 1200 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationInverter Grade Thyristors (Stud Version), 300 A
Inverter Grade Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A V DRM /V RRM V, 800 V, 1 V V TM 2.16 V I TSM at 3000 A I TSM at 60 Hz 3150 A I GT ma T J -40 C to
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationHigh Performance Schottky Rectifier, 240 A
High Performance Schottky Rectifier, 240 A HALF-PAK (D-67) PRODUCT SUMMARY I F(AV) V R Package Circuit Lug terminal anode Base cathode 240 A 150 V HALF-PAK (D-67) Single diode FEATURES 175 C T J operation
More informationVS-VSK.136..PbF, VS-VSK.142..PbF, VS-VSK.162..PbF Series
VSVSK.36..PbF, VSVSK.42..PbF, VSVSK.62..PbF Series Thyristor/Diode and Thyristor/Thyristor, 35 A to 6 A (New INTAPAK Power Modules) PRODUCT SUMMARY I T(AV) 35 A to 6 A Type Modules Thyristor, Standard
More informationSingle Phase Rectifier Bridge, 3 A, 6 A
S-, S- Series Single Phase Rectifier Bridge, 3 A, 6 A FEATURES Suitable for printed circuit board or chassis mounting Compact construction High surge current capability Material categorization: for definitions
More informationStandard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A
Standard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A 80PF(R)... DO-5 (DO-203AB) 80PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability Designed for a wide range of applications
More informationHEXFRED Ultrafast Diodes, 100 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) 2.5 V t rr (typical) 150 ns I F(DC) at T C 110 A at C Package INT-A-PAK Circuit configuration
More informationVS-T40HF..., VS-T70HF..., VS-T85HF..., VS-T110HF... Series Power Rectifiers Diodes (T-Modules), 40 A to 110 A
Power Rectifiers Diodes (T-Modules), A to A FEATURES Electrically isolated base plate D-55 (T-module) Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly High surge
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A
VS-80PF(R)...(W) High Voltage Series Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A 80PF(R)... 80PF(R)...W DO-5 (DO-203AB) DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 80 A Package
More informationStandard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A
VS-95PF(R)...(W) High Voltage Series Standard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A 95PF(R)... DO-5 (DO-203AB) 95PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability
More informationInsulated Ultrafast Rectifier Module, 200 A
PRODUCT SUMMARY V R I (1) F(AV) at T C = 87 C per module t rr SOT-227 4 V 2 A 6 ns Note (1) Maximum I RMS current admitted A to do not exceed the maximum termperature of terminals FEATURES Two fully independent
More informationInsulated Ultrafast Rectifier Module, 120 A
SOT-227 PRODUCT SUMMARY V R I F(AV) at T C = 65 C t rr 400 V 120 A 35 ns FEATURES Two fully independent diodes Ceramic fully insulated package (V ISOL = 2500 V AC ) Ultrafast reverse recovery Ultrasoft
More informationIRK.105 SERIES 105 A. THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR. ADD-A-pak TM GEN V Power Modules. Features. Benefits. Mechanical Description
IRK.15 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate
More informationStandard Recovery Diodes, (Stud Version), 85 A
Vishay High Power Products Standard Recovery Diodes, FEATURES High surge current capability Stud cathode and stud anode version Leaded version available RoHS COMPLIANT PRODUCT SUMMARY I F(AV) DO-3AB (DO-5)
More informationSingle Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
More informationVS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series Standard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 85 A Package
More informationIRKU/V41, 56 SERIES 45 A 60 A. ADD-A-pak TM GEN V Power Modules THYRISTOR/ THYRISTOR. Features. Benefits. Mechanical Description
Bulletin I2734 rev. E /2 IRKU/V4, 56 SERIES THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper
More informationSchottky Rectifier, 1.0 A
VS-BQ15PbF Schottky Rectifier, 1. A Cathode Anode SMB PRODUCT SUMMARY Package SMB (DO-214AA) I F(AV) 1 A V R 15 V V F at I F.32 V I RM 12 ma at C T J max. 125 C Diode variation Single die E AS 1 mj FEATURES
More informationHigh Voltage Phase Control Thyristor, 12 A
High oltage Phase Control Thyristor, 2 3L TO-220B PRIMRY CHRCTERISTICS I T() 8 DRM / RRM 800 TM.2 I GT 5 m T J -40 C to 25 C Package Circuit configuration 2 () (K) (G) 3 3L TO-220B Single SCR FETURES Designed
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) at 300 A at 2.18 V t rr (typical) at 45 A 233 ns I F(DC) at T C 300 A at 60 C Package
More informationHigh Performance Schottky Rectifier, 100 A
High Performance Schottky Rectifier, A VS-BGQHF4 Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die
More informationFast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
VS-6FL(R), VS-2FL(R), VS-6FL(R) Series Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities
More informationSchottky Rectifier, 3.0 A
VS-30BQ060-M3 Schottky Rectifier, 3.0 A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3.0 A V R 60 V V F at I F 0.52 V I RM 20 ma at 125 C T J max. 150 C Diode variation Single die E AS 5.0 mj
More informationInsulated Single Phase Hyperfast Bridge (Power Modules), 60 A
Insulated Single Phase Hyperfast Bridge (Power Modules), 6 A SOT-227 PRIMARY CHARACTERISTICS V RRM 65 V I O at T C = 123 C 6 A t rr 63 ns Type Modules - Bridge, Hyperfast Package SOT-227 Circuit configuration
More informationHigh Performance Schottky Rectifier, 200 A
High Performance Schottky Rectifier, 200 A VS-203CNQPbF TO-244 PRODUCT SUMMARY I F(AV) V R Package Circuit Lug terminal anode Lug terminal anode 2 Base common cathode 200 A V TO-244 Two diodes common cathodes
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 3 A (INTAPAK Power Modules) VSVSKCU3/6PbF INTAPAK PRIMARY CHARACTERISTICS V R 6 V V F (typical).23 t rr (typical) 3 ns I F(AV) at T C 3 A at 48 C Package INTAPAK Circuit configuration
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-2ETS8FP-M3, VS-2ETS2FP-M3 High Voltage, Input Rectifier Diode, 2 A 2 2L TO-22 FullPAK PRIMARY CHARACTERISTICS Cathode 2 Anode I F(AV) 2 A V R 8 V, 2 V V F at I F. V I FSM 3 A T J max. C Package 2L TO-22
More informationFRED Pt Gen 4 Single Ultrafast Diode, 500 A (INT-A-PAK Power Modules)
FRED Pt Gen 4 Single Ultrafast Diode, 5 A (INT-A-PAK Power Modules) VS-VSKEF5/6PbF INT-A-PAK PRODUCT SUMMARY V R 6 V I F(AV) at T C 5 A at 55 C t rr at 4 ns Type Modules - diode, high voltage Package INT-A-PAK
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-34A FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E359 approved
More information